Genzler Pricelist 2018 - Europe

ACOUSTIC INSTRUMENT
AMPLIFICATION
ACOUSTIC ARRAY
PRO AMPLIFIER
(SKU: AA-PRO)
The Acoustic Array Pro sets a new standard
for amplifying acoustic instruments.
Portable, powerful and packed with features,
the AA Pro gives you the perfect amplification
for any stringed instrument, and you
can even use it for vocals too. Add an extra
cabinet, and you have a powerful little PA rig.
The Genzler trademark is the Acoustic Array
configuration, which you will, of course, also
find on both the AA Pro and the optional
extension speaker.
AA Pro has two identical preamps, with both
XLR and ¼” jack inputs, plus a long list of
features:
• Phantom Power for Condenser Mics
• Signal Phase Reverse Switch
• Unique Contour Circuit for Quick
Tonal Adjustments
• Active EQ w/Sweepable Mids
• Adjustable Digital Reverb and Chorus
on Each Channel (switchable)
• Innovative Acoustic Array Speaker
System Design
• 10” Woofer w/4 x 2.5” Cone-driver Line
Array
• Slanted Cabinet Design for Improved
Projection
• Ultra-lightweight 12,25 Kg Compact
Cabinet Design
• Power Output: 150 W (combo); 300 W
with Extension Cab
• 3 XLR Direct Outputs (Channel A,
Channel B or both)
• Effects Loop
• Auxiliary Input
• Bottom-mounted Stand Adaptor
• Dimensions: 49.53 x 44.45 x 55.88 cm
EXTENSION SPEAKER
FOR THE AA PRO
(SKU: AA-PRO-EXT)
One 10” Neodymium cast frame woofer, with
Dual Wound voice coil, for increased power
handling. 4 premium Neodymium 2,5” Mid/
High cone drivers, loaded into a sealed Line
Array stack. This cabinet is very well suited for
both electric and upright basses.
Top/rear handle, Large rubber feet. *This cabinet
comes with two Neutrik Combi Speakon/
Jack inputs.
POWER HANDLING: 250 watts RMS
FREQUENCY RESPONSE: 55 Hz - 20 kHz
SENSITIVITY: 96 dB 1W 1M
IMPEDANCE: 8 ohms
CROSSOVER FREQUENCY: 1,6kHz
DIMENSIONS: 33 x 39,37 x 38,1 cm
WEIGHT: 9,5 kg