GME Supply Product Catalog Version 18.2

PETZL ASAP MOBILE FALL ARRESTER
3/8” - 7/16” (10 - 12 mm) rope diameter. Arrests falls, slides, and uncontrolled
descents. Works on vertical or angled rope. Locks on the rope even if grabbed during
the fall. Moves up or down the rope without any manual manipulation of the device.
Easy to install and remove at any point on the rope. May be combined with an
ASAP’Sorber or Absorbica energy absorbing lanyard to work at a distance from the
rope. Comes with an OK Triact-Lock automatic locking carabiner. Weight capacities:
220 lbs without energy absorber, 308 lbs with ASAP’Sorber, 551 lbs with Absorbica.
B71AAA - $249.95
PETZL ASAP LOCK MOBILE FALL ARRESTER
3/8” - 1/2” (10 - 13 mm) rope diameter. Integrated locking function allows the user to immobilize
the device to reduce the length of a fall. In case of a strong wind, this function also prevents the
rope from being blown upward. Arrests falls, slides, and uncontrolled descents. Works on vertical or
angled rope. Locks on the rope even if grabbed during the fall. Moves up or down the rope without any
manual manipulation. Easy to install and remove at any point on the rope. Connection arm makes the
system loss-resistant when passing intermediate anchors. May be combined with an ASAP’Sorber or
Absorbica energy absorbing lanyard to work at a distance from the rope. Weight capacities: 308 lbs
with ASAP’Sorber, 551 lbs with Absorbica.
B71ALU - $279.95
ROPE & RESCUE // ROPE GRABS & ASCENDERS
PETZL JANE ROPE
LANYARD
Can be combined with an Absorbica
energy absorber to set up an energyabsorbing
I or Y lanyard with a maximum
length of 2 m. Sewn ends protected by
plastic sheath to hold the connector in
place and protect the ends from abrasion.
May be used with an MGO Open 60
connector with very large gate opening
for connection to metal structures or to
large-diameter cables and bars.
L50 60 60 cm - $29.95
L50 100 100 cm - $31.95
L50 150 150 cm - $34.95
PETZL ASAP’SORBER
LANYARD WITH ENERGY
ABSORBER
Connects the ASAP or ASAP Lock mobile fall
arrester to the harness. Allows the user to
distance themself from the rope in order to
declutter the work area and protect the rope.
Absorbs the energy of a fall by the tearing of
specific stitching. Available in (2) lengths for a
choice of the best balance between distance
from the rope and reducing the fall length.
310 lbs weight capacity. Lacks sufficient
energy absorption to safely arrest the
potential energy during a two-person rescue.
L071BA00 20 cm - $42.95
L071BA01 40 cm - $50.95
PETZL ABSORBICA
Tear-webbing energy absorber, for use
in combination with a Jane rope lanyard
to make an energy-absorbing lanyard.
Maximum length of two meters. Ends
equipped with string to hold the connector
in position and protect the sling from
abrasion. Compact and lightweight. 551
lbs weight capacity. If using the ASAP
or ASAP Lock in two-person rescue
technique, an Absorbica must be used as
an energy absorber. Lacks sufficient energy
absorption to safely arrest the potential
energy during a two-person rescue.
L57 - $59.95
KONG 802 BACK-
UP MOBILE FALL
ARRESTER
3/8” - 7/16” (10 - 12) mm
rope diameter. Works on
vertical or angled rope. Moves
up or down along the rope
without manual intervention.
Easy to install and remove at
any point on the rope. For rope
access applications unit can
be used with tug cord. Nonaggressive
cam design. One
person weight capacity: 220
lbs. ANSI rated.
ANSI-8021NO400KK
Twistlock - $166.24
ANSI-8022NO402KK
Autoblock - $155.15
TUF-TUG
ALUMINUM
KERNMANTLE
ROPE GRAB
1/2” - 5/8” (13 - 16 mm)
rope diameter. Dual cams
for double safety. Patented
design pivots open for
easy attachment
anywhere
on lifeline.
Automatically
travels up
with user on
pre-tensioned
lifeline. Incorporates springloaded
cams to hold rope grab
in parked position.
5000-IE-AL-KM - $89.99
MIO ROPE GRAB
1/2” (13 mm) rope
diameter. Stainless steel selftrailing
rope grab. Removable
dual action pin for easy
placement. Grips automatically
in the event of a fall and
dissipates the energy of the
fall by slipping along the rope.
Comes with lanyard and ANSI
snaphook.
HD26005 1/2” rope -
$160.00
HD26006 5/8” rope -
$160.00
HD26114 7/16” rope -
$160.00
(800) 940-6762
79