Passquestion offer the latest 200-105 real questions

More documents

Recommendations

Info

https://www.passquestion.com QUESTION NO: 1 Which protocol authenticates connected devices before allowing them to access the LAN? 802.1d 802.11 802.1w 802.1x Answer: D Explanation: 802.1X authentication involves three parties: a supplicant, an authenticator, and an authentication server. The supplicant is a client device (such as a laptop) that wishes to attach to the LAN/WLAN. The term 'supplicant' is also used interchangeably to refer to the software running on the client that provides credentials to the authenticator. The authenticator is a network device, such as an Ethernet switch or wireless access point; and the authentication server is typically a host running software supporting the RADIUS and EAP protocols. The authenticator acts like a security guard to a protected network. The supplicant (i.e., client device) is not allowed access through the authenticator to the protected side of the network until the supplicant’s identity has been validated and authorized. An analogy to this is providing a valid visa at the airport's arrival immigration before being allowed to enter the country. With 802.1X port-based authentication, the supplicant provides credentials, such as user name/password or digital certificate, to the authenticator, and the authenticator forwards the credentials to the authentication server for verification. If the authentication server determines the credentials are 100% pass
https://www.passquestion.com valid, the supplicant (client device) is allowed to access resources located on the protected side of the network. QUESTION NO: 2 What is a difference between TACACS+ and RADIUS in AAA? A. Only TACACS+ allows for separate authentication. B. Only RADIUS encrypts the entire access-request packet. C. Only RADIUS uses TCP. D. Only TACACS+ couples authentication and authorization. Answer: A Authentication and Authorization RADIUS combines authentication and authorization. The access-accept packets sent by the RADIUS server to the client contain authorization information. This makes it difficult to decouple authentication and authorization. TACACS+ uses the AAA architecture, which separates AAA. This allows separate authentication solutions that can still use TACACS+ for authorization and accounting. For example, with TACACS+, it is possible to use Kerberos 100% pass
Page 1: https://www.passquestion.com Pass O
Page 5 and 6: https://www.passquestion.com Answer
Page 7 and 8: https://www.passquestion.com A stac
Page 9 and 10: https://www.passquestion.com immedi
Page 11 and 12: https://www.passquestion.com QUESTI
Page 13 and 14: https://www.passquestion.com D. Red
Page 15 and 16: https://www.passquestion.com Which
Page 17 and 18: https://www.passquestion.com E. 299
Page 21 and 22: https://www.passquestion.com Each s
Page 23 and 24: https://www.passquestion.com Spanni
Page 25 and 26: https://www.passquestion.com Ping i
Page 29 and 30: 100% pass https://www.passquestion.
Page 31 and 32: https://www.passquestion.com R2# sh
Page 33 and 34: interface Serial1/2 description **C
Page 35 and 36: outer ospf 5 log-adjacency-changes
Page 37 and 38: 100% pass https://www.passquestion.
Page 53 and 54:
https://www.passquestion.com Answer
Page 55 and 56:
ip ospf hello-interval 25 ip ospf 1
Page 57 and 58:
interface Serial1/2 description **C
Page 59 and 60:
outer ospf 5 log-adjacency-changes
Page 61 and 62:
https://www.passquestion.com QUESTI
Page 63 and 64:
https://www.passquestion.com D. AAA
Page 65 and 66:
https://www.passquestion.com Slow b
Page 67 and 68:
BGP table version 1, neighbor versi
Page 69 and 70:
100% pass https://www.passquestion.
Page 71 and 72:
100% pass https://www.passquestion.
Page 73:
https://www.passquestion.com Free d
show all

Passquestion offer the latest 200-105 real questions

Create successful ePaper yourself

Delete template?

Save as template?