OTM HOLESHOT® DRILLS - Kyocera
OTM HOLESHOT® DRILLS - Kyocera
OTM HOLESHOT® DRILLS - Kyocera
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
16<br />
TCMT INSERTS<br />
TCMT Inserts INCH<br />
Grades Available<br />
Cermet Uncoated Carbide Coated Carbide<br />
Part Number I.C. T R 5N 13 23C 40C<br />
TCMT 1.2(1.2)1 5/32 0.078 0.016<br />
TCMT 1.2(1.2)2 5/32 0.078 0.031<br />
TCMT 1.8(1.5)1 7/32 0.094 0.016<br />
TCMT 1.8(1.5)2 7/32 0.094 0.031<br />
TCMT 2(1.5)1 1/4 0.094 0.016<br />
TCMT 2(1.5)2 1/4 0.094 0.031<br />
TCMT 3(2.5)1 3/8 0.156 0.016<br />
TCMT 3(2.5)2 3/8 0.156 0.031<br />
TCMT Inserts are used in Stinger Drills, Counterbores and Countersinks shown on pages 13-15.<br />
TCMT Inserts are available in the Grades listed above.<br />
See page 3 for complete grade descriptions.<br />
Customer Service and Technical Support: 800.497.1892 u Fax: 419.738.6517<br />
www.kyocera.com/cuttingtools u otmsales@kyocera.com
Change language