EC type–approval certificate Description - Precia Molen

T2782 Révision 7 2006.02.16
EC type–approval
certificate
Number T2782 revision 7
Project number 210950
Issued by NMi Certin B.V.
Hugo de Grootplein 1
3314 EG Dordrecht
The Netherlands
Notified Body Number 122
In accordance The Council Directive 90/384/EEC on non-automatic weighing instruments.
with
Applicant Ravas Europe b.v.
Toepadweg 7
5301 KA Zaltbommel
The Netherlands
In respect of A class or , graduated, self-indicating electronic, non-automatic
weighing instrument
Manufacturer : Ravas
Type : RPW...CE and saVar…CE
Characteristics n ≤ the number of verification scale intervals mentioned in the test certificates
involved.
In the description T2782 revision 7 further characteristics are described.
Valid until 16 February 2006
Description and The weighing instrument is described in the description number T2782 revision 7
and
documentation documented in the documentation folder T2782-2, appertaining to this EC
type-approval certificate.
Remarks This revision EC type approval certificate replaces the earlier version, except for
its documentation folder.
Delft, 14 February 2003
NMi Certin B.V.
P.P.M. van Enckevort
Manager Certification Delft
Description
1 General information about the non-automatic weighing instrument
All properties of the non-automatic weighing instrument, whether mentioned or not, may not be in
conflict with the legislation.

1.1 Essential parts
The non-automatic weighing instrument is equipped with the following parts:
- Indicator, see table 1;
- Slope detector, see table 2
- Load cell(s)/ load transmission, see table 3;
- Junction box, see table 4;
- Load receptor, see table 5;
Table 1: Indicator
Manufacturer Test certificate number Type
Penko Engineering TC2636 SAI
Penko Engineering TC6162 4101
GSE D09-95.42 GSE Model 450
GSE D09-95.45 GSE Model 550
Bizerba D09-96.32 ITL
Ravas TC5109 2100
Ravas TC5785 2100n
Mettler-Toledo D93.09.108 ID7
Mettler-Toledo TC5818 Spider SW-BC-FC
Ravas TC5266 4100
Mettler-Toledo D09-98.13 ID3sTx
SysTec GmbH D09-02.03 IT3000
SysTec GmbH D09-02.27 IT8000
SysTec GmbH D09-97.08 IT9000
Table 2: Slope detector
Slope detector Drawing number
Manufacturer Tasseron
Type 21008043204
Switching point X-axis: 2° from horizontal
7-6
Y-axis: 2° from horizontal
Accuracy ± 0.5°
Manufacturer Günter Nürnberg
Type 21008074.226
Switching point X-axis: 2° from horizontal
Y-axis: 2° from horizontal
Accuracy ± 0.5°
Table 3: Load cell(s) / load transmission
Nr. Manufacturer Test/OIML certificate
number
5 4 00 0 02 002
Type Drawing number of load
transmission
1 Tedea TC2353 3410
2 HBM TC2163 HLC-BLG 7-2 and 7-3
3 Sensortronic Inc. R60/1991-GB-94.05 65023C
Table 4: Junction Box
Description Drawing numbers
Stahl 8118/221
Stahl 8146/141-10 3-1
Stahl 8146/241
Table 5: Load receptor
Type Load receptor Nr. of
Load cells
Load cell type
See No. of Table 2

Pallet truck 2 lifting forks
(fully electronic)
1.2 Essential characteristics
4 or 6 per system 1, 2 or 3
The weighing instrument, the internal printer and peripheral equipment are locked when the load
transmitting device is more then 2° out of level on the X-axis (drive direction) or 2°out of level on
the Y-axis (width direction).
Further essential characteristics are described in the test certificates involved.
1.3 Essential shapes
The data plate is secured against removal by sealing or will be destroyed when removed.
To secure components that may not be dismantled or adjusted by the user, the non-automatic
weighing instrument has to be secured in a suitable manner on the locations indicated in the test
certificates involved and indicated in the drawings numbers 11-1, 11-2 , 5 4 10 5 02 002 and 5 4 10
5 02 001.The securing component has to bear either:
- a mark of the manufacturer laid down in a notified body approved quality system (Annex II of
the Directive 90/384/EEC), or
- an official mark of a Member State of the EEC, or an other party to the EEA agreement.
1.4 Conditional parts
The non-automatic weighing instrument may be equipped with peripheral equipment which is used
for the applications listed in article 1(2)(a) of the EC-directive (90/384/EEC), if the peripheral
equipment is certified to be connected to an EC type-approved non-automatic weighing instrument
by a Notified Body appointed to certify non-automatic weighing instruments according to paragraph
I of Annex II of the EC directive on non-automatic weighing instruments.
1.5 Conditional characteristics
Further conditional characteristics are described in the test certificates involved.
1.6 Conditional shapes
The indicator can be build in an explosion proof enclosure, see drawing nr. 5020-12 sheet 2.
2 Approval conditions
See chapter 1.3, essential shapes.
3 Seals and verification marks
See chapter 1.3, essential shapes
4 CE-mark of conformity and inscriptions
The marks, facilities for the marks and the inscriptions on the non-automatic weighing
instrumentfulfil the requirements of article 1 of Annex IV
Documentation folder
Description Drawing number Rev. Remarks
Kwikschakelaar 7-6 -
Voorbeeld inbouw krachtopnemer / zij-aanzicht 7-2 -
Voorbeeld inbouw krachtopnemer / voor-aanzicht 7-3 -

Samenstelling RPW...EX 3-1 -
Sealing 11-1 -
Sealing 11-2 -
Lay-out RPW-Ex-3030-CE 5020-12 -
Sealing 4100 approved 5 4 10 5 02 002 2
Sealing RPW4100 approved 5 4 10 5 02 001 2
Levelswitch Günter Nürnberg 5 4 00 0 02 002

T2782 (UK) - 5 4 10 5 02 001

T2782 (UK) - 5 4 10 5 02 002

T2782 (UK) - 11-1

T2782 (UK) - 11-2