ALLROUNDER The Universal machine for stubble cultivation and ...

More documents

Recommendations

Info

6 Hydraulic cross boards 7 Double 350mm rollers for heavy soils 8 Support wheel 9 Track eradicators 4 | Levellers After the plough the spring-loaded ‘V’ levellers even the ground in front of the rear roller. For primary and secondary stubble cultivations the levellers must be removed. This is simply done using pins. 5 | Mammoth tine 50 x 13mm or Hercules tines 70 x 12mm For light and medium soils the Mammoth tines are suitable. For hard dry loam or clay soils we recommend the Hercules tine. Both these tines can be equipped with 260 x 50mm reversible points or 175mm goosefoot points. The goosefoot point can work very shallow and can be used for organic weeding. 6 | Hydraulic Cross Boards The hydraulically adjustable cross boards level the soil and take out the tractor wheelings particularly in ploughed ground. In heavy soils the cross boards reduce clods before they enter the tine field. 7 | Double 350mm roller for heavy soils The double 350mm roller is best for medium to heavy soils. The flat iron bars on the roller act on the soil like a combine drum reducing the clods and also drive the rollers round. 8 | Support wheel The support wheel is only required when the ALLROUNDER is not equipped with a rear roller. 9 | Track eradicators The massive double coil track eradicator tines have a reversible point. Two track eradicator tines are required for each tractor wheel. They are fitted to the intermediate frame box section for maximum strength. Each track eradicator tine should be located on the edge of the tractor wheeling and this way the soil is pulled in to fill it. The hydraulic cross board is the preferred tool for this job.
Technical Data ALLROUNDER Working widths 3.00 4.00 5.00 6.00 7.00 10.00m Transport 2.70 2.70 2.70 2.70 2.70 3.00m Number of tines 21 25 33 39 47 65 Tine Type Mammoth 50x13mm Hercules 70x12mm Tine spacing 15cm Under frame clearance 55cm Weight 900 1280 1505 1780 1960 5200kg Length with roller approx. 3.00m Options Levelling hydraulic cross boards or track eradicators, ‘V’ levellers Tines Mammoth or Hercules tines Rollers Single roller 350mm / twin roller 350mm Single roller 450mm / twin roller 450mm STS roller 530mm Following Harrow 10mm or 13mm Lights, indicators and warning boards For advise on the most suitable options for your soils please refer to one of our advisers. For the 10m ALLROUNDER please see the specific leaflet.
Page 1 and 2: ALLROUNDER
Page 3: The ALLROUNDER due to its high unde

ALLROUNDER The Universal machine for stubble cultivation and ...

Create successful ePaper yourself

Delete template?

Save as template?