Installation Operation Maintenance P3/EP3 Modular Linear Positioner

More documents

Recommendations

Info

10 Mounting instructions for <strong>P3</strong>/E<strong>P3</strong> with mounting kit 30168S
Connections Air: Port S Supply air Port C+ Connection to actuator Port IP Pneumatic input signal (external I/P) Electrical connection Port I E Dimensions Electric input signal Air connections: 1/4" NPT alt. G 1/4" Electrical connection: M20 x 1.5 alt. NPT 1/2" Loctite 577 or equivalent is recommended as a sealant. Direct / Reverse function It is simple to adapt the positioner for direct or reverse function. Unscrew the flapper valve nozzle and reverse it, and change the mounting on the actuator. See figure page 12. 4-20 mA Data for air and electrical connections, see section Technical Data on page 20. Flapper valve position 11 ➠ C+ ➠ Supply Input 3-15 psi
Page 1 and 2: P3/EP3 Modular Linear Positioner In
Page 3 and 4: 1. Introduction The PMV P3 is a mod
Page 5 and 6: 3. Design The P3 positioner compris
Page 7 and 8: 5. Function General The P3 position
Page 9: Mounting according to IEC 534-6 N.B
Page 13 and 14: Electrical connections On positione
Page 15 and 16: 7. Adjustments Gain Default setting
Page 17 and 18: Flapper nozzle The flapper valve ho
Page 19 and 20: 9. Trouble shooting Fault symptom C
Page 22 and 23: 22 11. Spare Parts List 1 4 3 2
Page 24: Germany Flowserve Sperberweg 16 D-4

Installation Operation Maintenance P3/EP3 Modular Linear Positioner

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?