The Leitz full range of products - Leitz Tooling Systems Inc.
The Leitz full range of products - Leitz Tooling Systems Inc.
The Leitz full range of products - Leitz Tooling Systems Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1. Sawing 1.6 Cutting non-ferrous metals and plastics<br />
1.6.1 Cross cut and mitre sawblades<br />
■ Solid wood<br />
■ Board, coated<br />
■ Board, uncoated<br />
■ Non-ferrous metals<br />
Cross cut and mitre sawblades -<br />
hollow pr<strong>of</strong>ile from above<br />
Application:<br />
For cutting and mitre cutting with reduced cutting width. Spray lubrication is<br />
recommended when machining non-ferrous work piece materials. <strong>The</strong><br />
negative hook angle suited to cutting from above.<br />
Machine:<br />
Circular sawing machines for cross cutting, trimming, mitre cutting and double<br />
cross cutting.<br />
Workpiece material:<br />
Non-ferrous pr<strong>of</strong>iles and plastic pr<strong>of</strong>iles (wall thickness 1.0 to 2.0 mm).<br />
Technical information:<br />
<strong>The</strong> negative hook angle is suited to cutting from above. Reduced cutting width<br />
and tool body thickness. Tool body tooth shape in noise reduction design.<br />
<strong>Inc</strong>reased cutting performance through using a special coating on the blade body.<br />
Circular sawblades - wall thickness 1.0 - 2.0 mm<br />
WK 467-2<br />
D SB TDI BO NLA Z ZF SW WSS ID<br />
mm mm mm mm mm<br />
Degree<br />
200 1,8 1,4 20 KNL 80 FZFA/FZFA -5 �� 060274 ●<br />
250 2,0 1,6 30 KNL 100 FZFA/FZFA -5 �� 060275 ●<br />
300 2,2 1,8 30 KNL 120 FZFA/FZFA -5 �� 060276 ●<br />
■ Plastics<br />
■ Mineral materials<br />
■ Composites<br />
23