DiNY pQ Nd - IB Laser

The robust and compact DiNY pQ offers high
energy and MW peak power!
355 nm: 1.2 mJ
532 nm: 2.5 mJ
1064 nm: 5 mJ
Key Features
• MW Peak Power
• Up to 1 kHz
• 5 mJ
• < 8 ns
• 1064 nm
Applications
• Micromaterial Processing
• Ablation
• Marking
• Cleaning
• Research & Development
• Unique Sturdy Design
• Excellent Beam Parameter
• Small Footprint
• Scalable

DiNY pQ Nd: YAG Laser
Versatile Controls for Fab-Line Integration and OEM
The DiNY laser family of products all
contain a state-of-the-art microprocessor
controlling all laser
functions in real time.
User interaction is obtained by the
RS232 interface from any PC. All
basic laser parameters such as pulse
energy and pulse frequency, can be
set via the interface. The laser’s
operation is controlled by a set of
more than 40 high level language
ASCII commands. Detailed status
information on laser temperatures,
flow rate and input characteristics
can be sent to any external computer
for viewing status.
Available software functions are
• external / internal trigger
• external / internal gate
• burst mode
• single shot emission
IB Laser, Inc. 4531 36th Street
Orlando, FL 32811-6527
Phone: +1 (407) 438-7600
Fax: +1 (407) 859-2425
e-mail: usinfo@ib-laser.com
Logic-gates control the power
electronics directly and in real time.
The gates safeguard proper laser
operation, even if there is inconsistent
input from the operator or the
controlling PC.
Parameters are derived from the customers
process and stored. The laser
control then handles the internal
processes in a sub-µs regime, as
needed by the laser physics. With
these parameters set, the whole
system can exclusively be controlled
without a PC by fast analogue or
TTL-digital output, e.g. from
CNC-machinery.
With IB-Laser´s open-system-design
and firmware, many operational
tasks in an industrial environment
can be programmed into the laser
controller, instead of requiring
additional hardware.
Dimensions in millimeters
IB Laser AG Am Schlangengraben 16
13597 Berlin, Germany
Phone: +49 30 3 /37 74-0
Fax: +49 30 3 /37 74-477
e-mail: info@ib-laser.com
www.ib-laser.com
Specifications subject to change without notice.
Wavelength
Pulse Energy @ 500 Hz
Wavelength
Pulse Energy @ 500 Hz
Wavelength
Pulse Energy @ 500 Hz,
Fiber Coupling
Pointer
Specifications
Wavelength 1064 nm
Pulse Energy at 500 Hz 5 mJ
Stability of Pulse Energy 1.2% rms
Pulse Duration < 8 ns
Max. Repetition Rate 1000 Hz
Polarization 100: 1
Beam Diameter (TEM00) 1.1 mm
Beam Parameter M 2 ≤ 1.3
Options
Disconnectable Power Cable
Cable Length - Up to 10 m
Beam Expander
Telediagnosis
OEM Housing
CNC-Direct Interface
Laser Beam Output H 50 mm, Centered
Laser Head
Laser Control
Power
Requirements
Other Data
532 nm
2.5 mJ
355 nm
1.2 mJ
266 nm
On Request
5 kg, H 90 X W 120 X L 405 mm
2 m Cable Connection to Laser
Control
19” rack, Approx. 70 kg
H 530 X W 553 X L 600 mm
110 VAC/16 A
or 230 VAC/8 A
IBL DiNYpQ-DS 08/02