Luggage Tracker Manufactures - A Free Inventory Management System - ThinkRace Technology

4.4 Alarm switch There are three approaches to give an alarm,
including sending messages,calling the phone and landing platform.
Each type will support one kind orvarious kinds approaches.
Type of
alarm
Anti-dismantlement
Light sensation
Fence
Text main
switch
Off
Phone Switch of Switch of
main switch Platform alarm text alarm
Off
Off
Off
Support
Off
Off
Off
Switch of
phone alarm
Off
Off
Note: Factory default is the low-consumption model. If users need apply
theanti-dismantlement alarm and light sensitive alarm, they can
open it by platform, APP or text order.
Off
4.5 Order set of text
Super Admin Command:Add 'at+wpar='to the command to config the
device without setting SOS number.
No. Name of order Form of order Instruction
1
2 C
sos,xxxxxx
xxxxx
3 Mode,0/1
4 ITV
Text “SOS xxxxxxxxxx to send to the SIM card of equipment,
namely the guardian number. xxxxxxxxxx means the
guardian number that needs to be set. If this number is
unavailable, it means guardian numbers need to be cleaned.
Text C to send to the SIM card, namely the information of
current location that can be received by equipment.
Text Mode, 0 or Mode, 1T to send to the SIM card of
equipment, namely the real model transformation. 0 means
standby model and 1 means tracking model.
Text ITV, 30 to send to the SIM card of equipment, which
means the modification frequency of rotation time is 30
seconds and the effective range is 10-3600 seconds.
8 9
5 TIME
6
7
Anti
8 dismantling Fcbj,1,1,1
alarm
9
Light sensor
alarm
APN,apn
IP1,IP
address,port
Jgbj1,1,1
Text time, 0800,2 to send to the SIM card, which means
standby model will be reported two times during 8:00 am. to
8:00 pm. And the time range is 0000-2359, which shows as
00:00-23:59 and the number range is 1-48.
apn: local telecom provider apn code.
The platform server IP address and port number.
Fcbj, n1, n2, n3 are platform switch, n2 is text switch and n3
is phone switch. 1 means starting and 0 means ending.
Jcbj, n1, n2, n3 are platform switch, n2 is text switch and n3
is phone switch. 1 means starting and 0 means ending.
V. Platform landing
5.1 Landing position service platform
Please land the spot of service platform designated by dealer to
conductrelevant settings and functional operation.
5.2 APP logining
10
Please login the website designated by dealer to upload client application
toinstall ios and Android.
Appendix I Fault and Elimination
Equipment Non-online
1.Inspecting the equipment signal light, it shows general server connection when
blue GSM signal light flashes once each 3 seconds; It shows SIM card loose
or poor contact when this light keep long bright, and it can be tried to shutdown
and install the SIM card again.
2.Please try to dial SIM card number if the SIM card possesses phone call
function. And it will be hung up automatically in general; It can be tried to
shutdown and install the SIM card again when it prompts power off or “can not
be connected for the moment”.
3.Please contact the technical personnel to assist disposing and rework, if both t
he blue signal light and phone call function are normal and the equipment still
be non-online.
Can not Location after Equipment Online
1.Inspecting the equipment signal light after equipment power on, it shows
successful location if the blue GPS signal light flashes once each 3 seconds; it
11
shows non-location if this light keep long bright, in this time, please confirm
whether GPS/beidou ceramic side is upward, whether there are metal objects
surrounding the equipmen
2.Please restrat the equipment, and set it on open ourdoor ground, supplying
power by built-in battery and Check if it can locate successfully, when
installtion and location of equipment are all correct.
3.Please contact the techinical personnel to assist disposing and rework, if it still
can not locate in open outdoor ground.
Equipment Off-line when Operation
1.Confirm if the SIM card is in arrearage at first;
2.Please try to dial SIM card number if the SIM card possesses phone call
function. And it will be hung up automatically in general, in this time, it can be
sent short message(at+wpar=reset) to the equipment for restarting; if it still can
not be on-line after restart, please check the equipment and restart manually.
3.There is possibility that the vehicle is located in underground garage and other
place with poor siginal, if the dialed phone prompts power off or “can not be
connected for the moment”. When the vehicle comes out from the underground
garage, the equipment will recover network and be on-line automatically;
Please check the equipment and restart manually if it is confirmed that the
surrounding situation is well and there is driving during off-line.surrounding
situation is well and there is driving during off-line.
4.Please contact the techinical personnel to assist disposing and rework, if it still
can not be on-line after restart the equipment manually.
The Accuracy of Satellite Location is not enough.
1.Please confirm the equipment is in on open outdoor ground or there is no metal
cover on the installation place of BDS/GPS antenna.
2.The accuracy of satellite location is about 10 m, accuracy is not enough
because the equipment has been transferred in indoors. It will be changed to
base station location in indoors, due to the double models of location including
BDS/GPS and base station. The accuracy of base station varies from 50m to
hundreds of meters according to the base station density in its environment.
The base station location can be closed on the platform.
● The purchased monthly
payment traffic card arrears before the appointed date.Charge of short
message and phone call will not be calculted in general by the monthly
payment traffic card, only providing monthly payment data traffic. Using short
message function will shorten the monthly payment duration of traffic card. All
the setting and function of this product can be operated by mobile phone APP,
WEB and other methods,it is suggested to purchase in priority.
● False Login when log in the system, appearring non-existence of this IMEI No.
or client account.Please contact the customer service and add this IMEI
account into the system.
Appendix II After-sale Service and Guarantee Lists
● The customers can choose refunding, changing or after-sale service if it appears
performance failure in this product within seven days purchasing the products.
● The customers will receive free guarantee service if it appears non-factitious
damage false within one year purchasing the products.
● The guarantee card shall be provide when need guarantee service. Our
company have the rights to handle as no guarantee, if this card can not be
provided or this card is altered privately.
● It will void guarantee if it is included in the circumstance below. And the
maintenance can be provided by our company, charging the cost price of spare
parts.
1.Equipment damage due to human factor.
12 13 14
2.Product damage due to false wiring.
3.Equipment damage due to non-compliance with this Operation Insutruction.
4.Equipment damage due to force majeure including natural disasters, lightning
stroke and etc.
Please keep this guarantee card properly for our better service.
User Name
Contact Add.
Contact Number
Sales Person Name
Purchase Date
Purchase Site
Local Sales Unit
Guarantee Date
Product Guarantee Card
(Stamp)
Product Model
Product Serial Number
Local Sales Phone Number
Guarantee Content
15