Trans-Tech® Gravity Feed Spray Gun
Trans-Tech® Gravity Feed Spray Gun
Trans-Tech® Gravity Feed Spray Gun
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Compact by DeVilbiss significantly<br />
raises the benchmark in spraygun<br />
performance and productivity<br />
Compact <strong>Gravity</strong> utilises the very<br />
latest advances in EPA compliant<br />
<strong>Trans</strong>fer-Technology. This provides<br />
considerable paint savings whilst<br />
producing the highest levels of<br />
atomisation with high speed application<br />
flow rates. Such exceptionally efficient<br />
material transfer ensures optimum<br />
coverage and paint usage while<br />
complying with the toughest<br />
environmental legislation.<br />
Weighing only 415 grams, this high<br />
performance gun will cover as fast as a<br />
conventional gun but with very high<br />
material savings. Fully compliant with all<br />
existing and anticipated environmental<br />
legislation, the Compact <strong>Gravity</strong> <strong>Feed</strong><br />
gun is the profitable way to achieve<br />
superb standards of finish quality.<br />
<strong>Gravity</strong> feed guns are becoming<br />
increasingly popular because colour<br />
changes are quick and don’t waste<br />
expensive paint. Thanks to its lightness,<br />
ease of handling and performance<br />
superiority DeVilbiss Compact <strong>Gravity</strong><br />
sets the standard as the preferred gun<br />
for the industrial finishing marketplace.<br />
The wide selection of nozzles enables<br />
the rapid application of many different<br />
finishes including solvent/water-borne<br />
paints, high solids, lacquers, stains,<br />
glaze, base and clear coats, twin pack<br />
and many other finishing materials.<br />
<strong>Trans</strong>-Tech ®<br />
<strong>Gravity</strong> <strong>Feed</strong> <strong>Spray</strong> <strong>Gun</strong><br />
� Robust, ultra light, work friendly design for higher output<br />
� <strong>Trans</strong>-Tech fully EPA compliant for superior material<br />
transfer efficiency and savings<br />
� Ultra lightweight greatly reduces RSI and operator fatigue<br />
� CE marked and fully ATEX approved<br />
� Suitable for all industries handles solvent and water<br />
borne materials including low, medium, high solids and 2K
<strong>Gravity</strong> <strong>Feed</strong> - Air Cap, Needle and<br />
Fluid Tip combinations<br />
COMPACT’S unrivalled spray performance is achieved<br />
with the utilisation of the very latest “cutting edge”<br />
atomisation technology.<br />
We offer a range of high-grade Stainless Steel Fluid<br />
Tips and Needles, matched “TRANS-TECH ® ” Compliant<br />
Air Caps, manufactured from Plated Hard Brass for a<br />
long and durable working life. Please select your<br />
Compact spraygun preference and nozzle combination’s<br />
from the chart below to provide you with the Optimum<br />
performance for your individual spray process.<br />
Compact sprayguns are available as “boxed” gravity<br />
feed kits c/w 568 ml gravity cup.<br />
Please refer to the service bulletin for further<br />
technical information.<br />
Example of COMPACT <strong>Spray</strong>gun part numbering:- COM-G510B-16 means...<br />
COM = COMPACT GUN / G = <strong>Gravity</strong> / 510 = <strong>Trans</strong>-Tech Air Cap / B = Blue <strong>Gun</strong> / 16 = 1.6 Fluid tip and needle<br />
<strong>Spray</strong> gun inlet thread sizes & type :-<br />
Air Connection<br />
1 /4” (m) Universal Thread size, accepts BSP and/or NPS connectors.<br />
Fluid Connection<br />
3 /8” (m) Universal Thread size, accepts BSP and/or NPS connectors.<br />
ITW Industrial Finishing<br />
Ringwood Road, Bournemouth, BH11 9LH England<br />
Tel: +44 (0)1202 571111<br />
Fax: +44 (0) 1202 573488<br />
Email: industrial.mktg@itwfinishing.co.uk<br />
ITW Oberflächentechnik GmbH & Co. KG<br />
Justus-von-Liebig-Strasse 31, D-63128 Dietzenbach<br />
Tel: +49 (0) 6074-403-1<br />
Fax: +49 (0) 6074-403-300<br />
Email: marketing@itw-finishing.de<br />
ITW Surfaces et Finitions<br />
www.itwifeuro.com<br />
Fluid Tip/needle (ST/ST)<br />
size and code [mm]<br />
1.3, 1.6, 1.8, 2.0<br />
Compact GRAVITY gun<br />
shown overleaf with<br />
standard 568ml <strong>Gravity</strong><br />
Cup - part no GFC501.<br />
Cup also available in<br />
Blue Polyester for<br />
aggresive materials order<br />
pt no GFC511.<br />
Optional nylon<br />
tipped needle.<br />
COMPACT Air Cap Number and Type Air Consumption <strong>Gun</strong> Handle Air Inlet *Typical *Typical<br />
Pressure Bar (psi) Fluid Flow Fan Pattern<br />
recommended ml size mm<br />
COM-500R(HVLP) <strong>Trans</strong>-Tech <strong>Gravity</strong> 195 l/min (7 scfm) 1.0 bar (14 psi) 130-190 Round spray<br />
COM-505(HVLP) <strong>Trans</strong>-Tech <strong>Gravity</strong> 385 l/min (13.6 scfm) 1.4 bar (20 psi) 130-190 270<br />
COM-510 <strong>Trans</strong>-Tech <strong>Gravity</strong> 283 l/min (10 scfm) 2 bar (29 psi) 160-220 270<br />
COM-513 <strong>Trans</strong>-Tech <strong>Gravity</strong> 394 l/min (14.1 scfm) 2 bar (29 psi) 200-800 350<br />
COM-590 <strong>Trans</strong>-Tech <strong>Gravity</strong> 218 l/min (7.8 scfm) 2 bar (29 psi) 0-150 150<br />
<strong>Gun</strong> Weight: 415 grams (gun only) *Flow rates and fan size will vary accoring to paint/material viscosity and pressures used.<br />
*COM-505(HVLP) and COM-500R(HVLP) air caps operate at 0.7 bar (10 psi) at the cap.<br />
163-171 Av des Auréats,<br />
26014 Valence cedex FRANCE<br />
Tel: +33 4 75 75 27 00 Fax: +33 4 75 75 27 59<br />
Email: mkt@itwsf.com<br />
ARB Updated - 04.07
Change language