Oracle 1Z0-489 Braindumps - The Easy Way to Pass SPARC M6-32 and SPARC M5-32 Server Certified Implementation Specialist 1Z0-489 Exam

More documents

Recommendations

Info

Question 1 You enter the following command from the service processor; start accomplish? /HOSTO/console. What does this A. Log in to the domain as user root via the console. B. Log In to the host as user root from another system. C. Confrm that the boot disk confguraaon is as expected. D. Connect to the console from the ACTIVE SP. Aoswern D Explanaaonn Referencen htpsn//docs.oracle.com/cd/EE1972-2E/872-EE88-E7/core_ilom_appa.html Question 2 A customer has a newly installed SPARC M5-37 platorm. Afer using the HS processes, the SPs are now confgured on their network, and the customer wants to confgure the PDomains. Which two opaons represent choices that the customer has to set up the platorm out of the box? A. accessing a Solaris domain on another host and using ipmi tool to assign components to PDomains B. using the Oracle ILOM BUI to assign components to PDomains C. using Oracle Ops Center to assign components to PDomains D. using the service processor ILOM command-line interface to assign components to PDomains Explanaaonn Referencen htpsn//docs.oracle.com/cd/E72355_2E/html/E2E7E2//222220E277785.html Question 3 Aoswern B, D You are connecaon serial and network cables to two SPs located at the front of the server. Your customer has requested that you set this up to enable E-GbE network speeds. Which acaon would you take? A. Connect 37 CAT6A cables from the SPO and SPE SER MGT RJ-25 ports to separate terminal devices. B. Connect Category 5 cables from the SPO and SPE SER MGT RJ-25 ports to separate terminal devices. C. Connect Category 7 cables from the SPO and SPE SER MGT RJ-25 ports to separate terminal devices. D. Connect Category 6 (or beterr cables and network devices that support E222BASE-T networks to separate terminal devices Aoswern D
Explanaaonn Referencen htpsn//docs.oracle.com/cd/E72355_2E/html/E2E7E2//2222b9dE313296.html Question 4 When booang up a pre-installed domain, you are asked for some confguraaon informaaon. Where should you look for that informaaon? A. System Administraaon Guide B. Installaaon and Confguraaon Plan C. Installaaon Guide D. Server Product Notes Explanaaonn Referencen htpsn//www.debian.org/releases/stable/armel/install.txt.en Question 5 Aoswern C During a site visit to a customer who has three SPARC M5-37 platorms, which two acaons would you take to confrm each platorm serial number? A. Visually check for the chassis serial number label at the front lower lef – hand side. B. Using the SP on each platorm to access the ILOM, run show /system serial_ number. C. Visually check for the chassis serial number label at the front upper right-hand side. D. Using the SP on each platorm to access the ILOM, run show /systemsystem_ idenafcaaon. E. Visually check for the chassis serial number label at the rear, towards the top, in the middle. Explanaaonn Referencen htpsn//docs.oracle.com/cd/EE1723-2E/872-EE88-E7/core_ilom_overview.html Question 6 Which three statements are correct about data paths in the SPARC M5-37 server? Aoswern B,D A. Within a DCU, a CPU talks to another CPU directly by using the coherency switch. The SSB is not needed. B. From one DCU to a diferent DCU, an even talks with only another even (same for oddr and hops to the odd-numbered board, if needed, on the desanaaon DCU. C. From one DCU to a diferent DCU, all CPUs can access all PCIe slots In the desanaaon DCU directly in
Page 1: Oracle 1Z0-489 Exam SPARC M6-32 and
Page 5 and 6: In order for this to go through pos
Page 7: Thank You For Trying Free 1Z0-489 P

Oracle 1Z0-489 Braindumps - The Easy Way to Pass SPARC M6-32 and SPARC M5-32 Server Certified Implementation Specialist 1Z0-489 Exam

Create successful ePaper yourself

Delete template?

Save as template?