Procedure to create Bitdefender Rescue Disk

Procedure To Create Bitdefender
Rescue Disk
Bitdefender Rescue Disk can said to be a free utility or tool which
immensely helps you to detect malware whether it is in minor or major
quantity. This also doesn’t overload or affect the operating system, so it
is no bar in the proper functioning and performance of your device. The
interesting thing is that it can be set up either on CD/DVD or a flash
drive for that matter. This is such a useful tool as it has been used by
the experts for many years. Now, if you want to know how to create
one for your own, then you are at the right place. You must follow the
procedure below and everything will be smooth sailing from thereon.
With a CD
Navigate to official Bitdefender site and download this
application. Use tools like the power ISO to change this setup into
an ISO image.
This is the part where you insert a CD/DVD or a flash drive into
the given slot.
To burn the disk image onto the CD/DVD, you ought to use Power
ISO.
Eject the media after the completion.
With a Flash Drive
If you choose to use a pen drive, then you are needed to employ
an open source tool named ‘Stickifier’.
Here download and install it.
Launch it utility and follow the steps:
Must download the ISO or use the local system.
Choose the image.
Select Option Next to proceed.

For the rescue disk, provide the software with the
storage media.
Now, enter the USB drive onto the port.
Choose the drive letter of the drive.
Press on Next.
Wait for installation to complete.
You can now use this created disk to scan your system.
Do contact Bitdefender Support Canada 1-855-743-8697 if you face
any kind of problem while performing this process.
Original Source