2018 Catalog

Connector Cover
(Shielded)
Shielded 63-20 PVC Cover with an R-Track Closure
Shielded Interconnect
Available in five standard trapezoidal shapes
to minimize debris and fluid exposure on critical
interconnect components.
Shielded Connector-Covers consist of a hightemperature
PVC jacket laminated to an SH1
aluminum foil EMI shield, with a 15 AWG ground wire and
an R-Track thumb pressure closure. The covers come
in five standard trapezoidal shapes that are intended
to enclose and EMI-harden a mated connector pair.
When used in conjunction with Zippertubing’s SH1 and
63-10 cable jacketing, they can create a fully EMIhardened
cable assembly. The Connector-Cover
may also be cut to form tapered cone shapes that
can carry the EMI shield over a connector mated to a
bulkhead or panel.
Non-Shielded Option See "Connector Cover " on Page 19
Thermal Option See "Connector Cover (ALP-500)" on Page 48
These easy-to-install covers have good
abrasion, fluid and electrical resistance
REQUEST A QUOTE
ONLINE OR OVER
THE PHONE
EMI Shielding
Specifications
q Durability s Elongation 200% min.
450% max
N Material Type Polyvinyl chloride O Mil-Spec MIL-I-631D, type F,
form S, class I
x Operational Temp -4° to 221°F
-20° to 105°C
Tensile Strength
"
1,800 psi/min
3 RoHS Yes B Fungicide Does not support
growth
M Material Thickness 0.020” Dielectric Strength
m
700 volt/mil
5 Shelf Life 36 months + Volume Resistivity 1010 ohms/cm.
mm.
y Flame Retardant UL224, VW-1 Copper Corrosion
i
Meets Mil-I-631D
EMI Shielding
t
On-Site
Engineers
USA Manufacturing
Since 1957
ISO/TS 16949
ISO 9001
36