How to fix logic board issue on Macbook?

<strong>How</strong> <strong>to</strong> <strong>fix</strong> <strong>logic</strong> <strong>board</strong> <strong>issue</strong> on Macbook?
Dial-1-800-958-214
A <strong>logic</strong> <strong>board</strong>, which is another name for mother<strong>board</strong> termed as the
main component of any system, provides the central connection <strong>to</strong>
every external or internal device of a Macbook. But when this particular
component goes through some hardware related malfunctions then
<strong>fix</strong>ing this problem becomes an immediate responsibility of a user.
Fortunately, Apple devices always come up with an in-house diagnostic
suite called Apple hardware test which allows users <strong>to</strong> troubleshoot a
number of <strong>issue</strong>s pertaining <strong>to</strong> the Macbook. In order <strong>to</strong> use this <strong>to</strong>ol
properly <strong>to</strong> <strong>fix</strong> the <strong>logic</strong> <strong>board</strong> problem, here Apple Support provided
some quick steps which are described below:
Firstly, you have <strong>to</strong> shut down your mac and then unplug all the
cables except the power cable.
Then you have <strong>to</strong> restart your system while holding down the ‘D’
key on your key<strong>board</strong>.
Then you have <strong>to</strong> wait for the apple hardware test <strong>to</strong> load on your
system and once it is loaded, click on ‘extended test’ located in
the right side of the hardware test window.
Now you have <strong>to</strong> note down any error codes that this <strong>to</strong>ol
generates.
Then you have <strong>to</strong> call at our support center and give that error
code <strong>to</strong> get it <strong>fix</strong>ed.
You can also access this <strong>to</strong>ol online if not able <strong>to</strong> access it offline.
For this, you need <strong>to</strong> connect your system <strong>to</strong> your home network
and then restart your system.

Then you need <strong>to</strong> hold down the ‘D’ key at the same time and
then wait for a while for the <strong>to</strong>ol <strong>to</strong> get loaded.
Then you have <strong>to</strong> do <strong>to</strong> the same as done in the above steps. Click
on ‘extended test’ and then make a note of error codes generated
by this <strong>to</strong>ol.
After noting down the error code, you need <strong>to</strong> call at our Apple
MacBook Support Number 1-800-958-214 and give that error code
<strong>to</strong> our support team and they will provide you with a complete
solution <strong>to</strong> <strong>fix</strong> the <strong>issue</strong>.
Original Source:
https://applemacprosupportaustralia.blogspot.com/2018/12/how-<strong>to</strong><strong>fix</strong>-<strong>logic</strong>-<strong>board</strong>-<strong>issue</strong>-on-macbook.html