Telscape Brochure

More documents

Recommendations

Info

4640JP Telglow The Marine industry was one of the first international industrial group to embrace photoluminescent technology and it was through our Maritime Progress company that we brought ‘inhouse’ the development and manufacture of Telglow. It is now produced under the control of our chemical engineers in the Telegan Pressed Products plant in Manningtree, Essex. Telglow comes in three grades class B C and D the latter being the highest grade providing greater luminosity. In simple terms, the product absorbs light when available and discharges light in the darkness. It presents no fire risk is selfextinguishing and is non-toxic. Telglow LLL Strips - 50x1000mm - Class B Insert 30x1000mm - Class C Insert 40x1000mm - Class C Insert 30x1000mm - Class D Insert 20x1000mm - Class D Insert Our Telglow products are manufactured from Rigid board and flexible film batch stock that are certified by Lloyds Register. The certification is updated for each new batch. 0038/15 0038/15 Frames Utilizing the same Telbex TM colour scheme as the carrier, we offer a range of frames that can be used to display other vital evacuation/fire protection signage. Ensuring a clear, consistent evacuation guidance system throughout the building. Walls STAIRCASE B Up BIN ROOM STORE ELECTRICS 4 2 LIFT LIFT 1 Electrics Electrics 3 Electrics BIN ROOM Standard sizes available; STAIRCASE A Ground Floor Plan (Flats 1 – 4) HARDINGTON, Belmont Street, London NW1 8HN 120x200 - Door/Flat Indication signs 150x200 - Hazard and safety signs 100x300 150x400 - Fire exit signage Fire Action notices or 317x230 - other A4 signage Evacuation Plans or Floor 317x440 - Indication signage Bespoke sizes available on request 4640 telscape-int.com enquiries@telscape-int.com +44 (0) 1737 762 400 D I V I S I O N
Wall Carriers The <strong>Telscape</strong> range of PVC products can be supplied in the standard Telbex TM colours, including black (See End Caps at bottom of page for standard colour examples). Installation of the carrier is achieved by simply screwing through the extrusion into the desired surface or it can be fixed to the wall with a wide range of adhesives. Carriers and inserts can be cut and fitted but End caps may be necessary to give a complete finish. Wall Carrier - 60x2000mm - 40mm Class C Insert 50x2000mm - 30mm Class D Insert Featuring a central channel which can hold a corresponding Telglow photoluminescent insert. This carrier has been designed to comply with BS ISO 16069:2017 installation requirements including luminous contrast. N.B. All inserts are supplied in meter lengths. Safety Rail - 90x2000mm - 50mm Class B Insert 80x2000mm - 40mm Class C Insert 70x2000mm - 30mm Class D Insert The Safety Rail features a wider PVC border than the standard carrier and has been designed to be positioned higher up the wall. The increased size and alternative placement allows Telglow TM Tactile Symbols to be added. These self-adhesive photoluminescent symbols can assist both the visually impaired and, in smoke conditions, the regular sighted to safety. Kick Plate - 170x2000mm Kick Plate without Telglow channel Utilizing the inherent properties of Telbex TM , this “Kick Plate” has been designed with the intention of protecting doors/ surfaces from general wear and tear. In addition it can also be manufactured with a channel to accommodate one of the three classes of Telglow TM photoluminescent insert, enabling it to assist with evacuation route marking. Enclosed Wall Carrier - Bespoke It is our experience that some buildings have wall runs which are punctuated with doors and service ducts / columns and the installation is easier if the carrier is enclosed and completed to a given size(s). End Caps End caps are also available for the carriers on request, they offer a simple yet stylish option to give the desired carrier a finished, professional look. Available Colours Ral 6024 Ral 8025 Ral 3018 Ral 5002 Ral 5017 Ral 7046 Our Telbex PVC products are available in a range of colours. Approximate RAL colour references are shown (right). Also there are colour co-ordinated sign holders which can be matched to the escape route carrier to add quality to the installation. Colours can be used to differentiate between floor levels. +44 (0) 1737 762 400 enquiries@telscape-int.com telscape-int.com D I V I S I O N
Page 1: D I V I S I O N D I V I S I O N THE
Page 4 and 5: Why Photoluminescent? Telglow Rigid
Page 8 and 9: Floors Where walls are obstructed a
Page 10 and 11: Stairs Stairs represent a serious s
Page 12: THE WARNSTAR GROUP DESIGNED AND MAN

Telscape Brochure

Create successful ePaper yourself

Delete template?

Save as template?