Genesis Gear Product Catalogue '19

PRODUCT
CATALOGUE
‘19

PHOTO
CARBON
TRIPODS &
KITS
Our Carbon tripods were created to meet the
most difficult challenges. Stability under all
weather conditions, metal feet spikes provide
stability on boggy, subsiding grounds, while
rubber caps ensure a tight grip on slippery
surfaces. Durability to dampness, pollution,
dust and sand. Built to carry heavy loads, at the
same time light and easy to transport.
Low weight
High durability
Maximum load capacity
Detachable monopod
Reversible central column
Metal spikes and rubber caps
Maximum stability

PHOTO
@ Mythlands

C1 KIT
C1 Kit
C1 Tripod
ABH-34 Ball Head
0,34kg
C3
TRIPOD &
C3 KIT
C3 Kit
C3 Tripod
ABH-34 Ball Head
0,34kg

C5
TRIPOD &
C5 KIT
C5 Kit
C5 Tripod
BH-40 Ball Head
0,44kg
@ Mythlands
PHOTO

ALUMINIUM
TRIPODS &
KITS
Aluminium series tripods ensures low weight,
high durability, resistance to mechanical
damage, long service life, large load capacity,
interesting designs and very competitive prices.
Their legs are made of an aluminium and
magnesium alloy. One leg of both the A3 and
the ABT Kit can be transformed into a fullfledged,
practical monopod.
Low weight
High durability
Large load capacity
Reversible central column
Metal spikes and rubber caps

PHOTO
@ Mythlands

ABT KIT
ABT Kit
ABT Tripod
ABH-36 Ball Head
0,36kg
MINI ABT KIT
Mini ABT Kit
21cm
60,6cm
1,2kg
56,6cm
Mini ABT Tripod
21cm
48cm
52cm 11,4cm 6kg 0,82kg
ABH-36 Ball Head
0,36kg

A3
TRIPOD &
KIT
A3 Kit
A3 Tripod
ABH-34 Ball Head
0,34kg
@ Mythlands
PHOTO

TRIPOD
COMPARISON
SPECYFICATION C1 C3 C5 A3 ABT ABT MINI
MATERIAL carbon carbon carbon aluminium aluminium aluminium
MAX HEIGH
(WITH HEADBALL)
MAX HEIGH
(WITHOUT HEADBALL)
170,8cm 180,8cm 204cm 180,8cm 146,4cm 60,6cm
161,5cm 171,5cm 193,7cm 171,5cm 130cm 52cm
FOLDED LENGTH 46,5cm 50cm 51,9cm 50cm 44cm 21cm
MAX LOAD
CAPACITY
10kg 15kg 30kg 12kg 10kg 10kg
TRIPOD WEIGHT 1,08kg 1,36kg 1,7kg 1,66kg 1,2kg 0,82kg
KIT WEIGHT 1,42kg 1,7kg 2,14kg 2kg 1,57kg 1,2kg
@ Mythlands

PHOTO
@ Mythlands

MONOPOD
MPC-3
MONOPOD
The Genesis MPC-3 Monopod, made almost
entirely of carbon fibre, combines features
such as low weight, durability, and handiness.
The foot ends with a removable spike to increase
stability on soft ground, whereas the
rubber cap helps to manoeuvre the monopod
on slippery surfaces. The MPC-3 features
a wide grip made of insulation foam and
a standard 3/8” thread allowing the user to
mount film or photographic head.
Low weight
High durability
Maximum load capacity
Metal spikes
Rubber caps
Maximum stability
S1
SUPPORT STAND
The Genesis Base S-1 is a monopod support
stand made of high-quality components and
metals. It transforms a standard photo monopod
into a monopod that can be used for
filming purposes. Three rubber spikes ensure
an excellent grip on slippery ground. Although
it works perfectly with the MPC-3 monopod, it
is also compatible with other monopods fitted
with a 3/8” thread.

MH-10
MONOPOD HEADS
The Genesis MH-10 Tilt Head has been
designed as an additional accessory for the
MPC-3 monopod. This device allows for back
and forward tilt by +/-90°, and classic panning
within a range of 0 to 360°. Precise settings
are ensured by the scales marked on the
head, with five steps for panning function and
fifteen-steps for backward-forward tilts.
The mounting rails are compatible with
Arca-Swiss plates. The head comes with two
scales and may be mounted on all tripods with
a 3/8” thread.
MH-20
MONOPOD HEADS
The Genesis MH-20 is a tilt head and is used
for filming purposes. The MH-20 Head allows
the camera to tilt backwards and forwards
within a range of +/-90°. The setting precision
is ensured by a scale marked on the head, and
the rails for quick-release are compatible with
the Arca-Swiss standard.
The Genesis MH-20 is fitted with a spirit level
and has two replaceable hands. The head may
be easily used with classic tripods and monopods
with a 3/8” mounting thread.
PHOTO

BALL HEADS &
ROTATORS
STANDARD
BALL HEADS
The Genesis Base BH-34, BH-40 and BH-46
Ball Heads are made of a lightweight but strong
aluminium-magnesium alloy.
They feature a panoramic base with a scale that
ensures a seamless panning experience. There
is a rotating knob for unlocking the ball head
and a stop to adjust the hydraulic clamp of the
ball, ensuring a seamless and reliable equipment
operation. The quick‐release mounting
point is based on the Arca-Swiss standard and
features spirit level.
BH-34
BH-40
BH-46

LOW PROFILE
BALL HEADS
The Genesis Base LPH-25, LPH-30 and LPH-55
are designed even for the most demanding
of photographer who needs products that
combine functionality with reliability in every
possible situation. The unique design, a super
lightweight aluminium-magnesium alloy construction
with ergonomically shaped knobs
which allow the unlocking and locking the
ball with ease, are the factors that make the
LPH series a first-class piece of equipment for
professionals.
The Genesis LPH-25, with a weight of just 170g,
is one the lightest heads in the world.
Excessive Load Capacity
Compact and Light
Panoramic Clamp
Smooth Operator
Strong Locking
Arca-Swiss Compatible
LPH-25
LPH-30
LPH-55
PHOTO

IR-55QR
PANORAMIC ROTATOR
The Genesis Gear IR-55QR is a panoramic rotation
unit that allows for panoramic shooting at
a constant rotation angle.
Created using CNC machines resulting is greater
precision. It features 10 indexing degrees:
5° (n72), 10° (n36), 15° (n24), 20° (n18),
24° (n15), 30° (n12), 36° (n10), 45° (n8),
60° (n6) and 90° (n4). The device is made of
an aluminium-magnesium alloy. The rotator
offers two types of panning: the first method
allows only for the upper part of the device to
be rotated within 360°, while the second facilitates
panning at a given angle.
IR-64
PANORAMIC ROTATOR
The Genesis Gear IR-64 Panoramic Rotator
enables the user to take panoramic photos at
a constant rotational angle. Created using CNC
machines resulting is greater precision.
It offers four indexing angles: 8° (n45), 12° (n30),
15° (n24), 18° (n20). The IR-64, featuring a rail
compatible with rca-Swiss plates.

PH-01
PANORAMIC HEAD
Panoramic head for complete freedom of
setting the camera on a tripod. It gives the
possibility of rotation of the camera around
the nodal point, which is necessary for creating
professional panoramas.
The kit, which contains three Arca-Swiss rails
(20, 18, and 16 cm), a head with a screw clamp,
the IR-55QR Panoramic Rotator and a 50 mm
long quick-release. Aluminium and magnesium
alloy makes it durable and lightweight.
The PH-01 allows for both horizontal and vertical
shooting, and the rotating head features
an angular scale.
@ Mythlands
PHOTO

PLATES &
NODAL
SLIDES
Our plates and nodal slides have been
designed and manufactured to meet the
expectations of the most demanding photographers,
they are made of top-class materials
and created using CNC technology. If you are
looking for the best solutions available on the
market, we have it for you at unbeatable price.
CNC Technology
Arca - Swiss compatible
Ultimate Stability
Camera Protection

PHOTO

UNIVERSAL
QUICK RELEASE
PLATE
A universal quick release plate of Arca-Swiss
type designed for use with different camera
models. Entirely made of aluminium alloy
treated with the use of CNC technology and
finished during anodizing process. Comes with
anti-slip rubbers and bolts protecting against
the fall out from the mount.
PLA-28
PLA-50
PLA-60
PLA-70
PLA-100
PLA-140
PLA-200

L-TYPE
PLATES
The use of the L- type quick- release significantly
improves the comfort of taking portraits
and panoramas composed of vertical frames.
The Arca- Swiss mount is a very convenient
and quick solution for use. Changing the position
of the camera (vertical - level) takes only
a moment.
A full list of PLL plates:
PLL-5DMKII
PLL-5DMKIII
PLL-5DS/R
PLL-70D
PLL-760D
PLL-7D
PLL-7DMKII
PLL-80D
PLL-d500
PLL-A7
PLL-A9
PLL-A7II
PLL-DIV
PLL-D7100
PLL-D7500
PLL-D750
PLL-GH4
PLL-GH5
PLL-RX1
PLL-XT1
PLL-XT2
PLL-XT20
PLL-X100F
PLL-100
PLL-A6000
PLL-A6300
PLL-A6500
PLL-D810
PLL-D850
PLL-EM1
PLL-K1

NODAL
SLIDES
Universal nodal slide that has both the characteristics
of a photographic rail and a Arca-Swiss
grip. The plate is useful mainly in panoramic
photography, where it allows you to precisely
adjust the location of the nodal point, and
the graduatition in millimeters placed on the
rail makes it much easier. Due to the wide shift
range, this plate will also be useful in macro
photography.
Lenght
with clamp
127mm
Dove
tail lenght
100mm
Thickness
14mm
Width
38mm
Weight
105g
Mounting hole
3/8

PHOTO
@ Mythlands

SPIKES &
CLAWS
SPIKES
Genesis Base Spikes are special, replaceable
endings for tripod legs. These Spikes are made
of a high quality stainless steel and they do
increase the tripod’s stability when placed in
deep mud or sand. The Spikes are three times
longer than those typically mounted on tripod
legs, and so preventing a tripod from tilting on
any soft or subsiding ground.
They also feature attachments which prevent
automatic wringing out.
CLAWS
Genesis Base Claws are replaceable stainless
steel attachments intended for use on slippery
or glazed surfaces. These Claws provide additional
stability even in extreme conditions, and
they come with special gaskets that protect
against any accidental unscrewing from
a tripod leg.

RUBBER SUCTION
CUP FEET
The Genesis Base RF-80 and RF-50 are round
rubber tripod feet made of antislip plastics.
Their base has a diameter of 80 mm and 50 mm
(depending on the model). They feature a 3/8”
thread allowing the user to mount them onto
any Genesis Base tripod from the C and A
series. The RF-80 and RF-50 significantly
increase the tripod’s grip on smooth, slippery
surfaces such as floors, tiles, marble, epoxy
resin and glass.
Base RF-50:
Base Base RF-80: RF-58
Diameter
Weight
Mounting thread
Diameter
Weight
Mounting thread
50mm
270g (3pcs)
3/8
80mm
544g (3pcs)
3/8
@ Mythlands
PHOTO

BAGS
DENALI
BACKPACK
Genesis Denali is a multitasking backpack
designed especially for travel photographers.
The product combines the functionality of
a professional photo backpack with the advantages
of a well-equipped hiking backpack.
Capacious and well-protected photo compartment
can carry a large DSLR camera with the
set of lenses. Denali has been equipped with
a large number of pouches for small accessories
(chargers, additional battery kits, documents)
and a special holder for memory sticks
and photo filters. Denali is very comfortable to
wear and carry thanks to its waist and chest
straps. Genesis Air Flow System technology
helps to release and blow out air gathering between
the backpack and the back.
With a removable photo compartment you will
easily transform Denali backpack into comfortable
and light urban rucksack.
External dimension:
51cm x 31cm x 27cm
Capacity: 40l

Compartment
for a 15.6” laptop
Genesis
Air Flow System
technology
Carry a large
DSLR camera
with the set of
lenses
Waist and
chest straps
Large number of
pouches for small
accessories
BAGS

NATTAI
BACKPACK
Genesis Nattai is a lightweight, two-chamber
backpack for carrying a photo gear. Specially
profiled compartments for a camera, lenses
(including one 70-200 f/2.8 lens) and 15-inch
laptop will ensure transported equipment’s
safety in all conditions. Whereas ergonomic,
shaped straps will increase the comfort of use
during long photo expeditions. Nattai has been
tailored using the high-quality and resistant
fabrics with increased water resistance.
External dimension:
50cm x 35cm x 17cm
Photo compartment sizes:
30cm x 20cm x 13cm
Computer compartment sizes:
36cm x 30cm
Weight: 1,1kg

BAGS

URSA
BAG
URSA series shoulder bags constitute a new offer
of well designed, stylish, high quality products
for those who value mobility and flexibility.
Removable Internal Compartment
Laptop/Ipad Compartment
Top Handle
External Pocket on the flap
External Pocket on the hip side
Water Resistant Zippers
Two Easy Access Pockets
Adjustable Strap, Metal Clips
Upper Quick Access Type Zipper
Magnetic Clip Lock
Hydrophobic Fabric

Laptop
compartment
Top handle
Upper quick
access type zipper
Two
easy access
pockets
on the sides
Water
resistant
zippers
Magnetic
clip lock
Removable internal
compartment
Hydrophobic fabric
Separate raincover
for purchas
BAGS

Tailored to you
The bag is meant to be used by photographers,
but nothing prevents you from adapting
it to everyday use. All you have to do is take out
the main compartment.
Quick access
All of us – photographers, met with a situation
when we took literally seconds to take a picture.
In this case, quick access to the equipment is
almost priceless, and in this bag it is possible
through a hole with a zip, located in its upper
part.
Safety
The external material that we used is hydrophobic,
while zip fasteners are sealed.
Such solutions help to protect the interior of
the bag during adverse conditions, because
water does not penetrate the bag. However,
when choosing extreme weather conditions an
additional, optional rain cover should be used.
URSA M
External Dimension:
32cm x 22cm x 16cm
URSA L
External Dimension:
40cm x 30cm x 17cm
URSA LARGE SLIM
External Dimension:
40cm x 30cm x 12cm
DSLR friendly
URSA XLARGE
External Dimension:
47cm x 34cm x 21cm
Huge Loading Space

BAGS

ORION
BAG
Always keeps your mirrorless camera and
other accessories protected. Orion is a small
shoulder bag, designed special for DSLR
cameras with additional lenses.
The bag is equipped with a movable partitions,
so you can customize interior to your needs.
Orion is also equipped in separate pockets
for your other day-to-day essentials, like your
smartphone, MP3 player or other media
accessories.
Best for mirrorless camera
Adjustable partitions for interior
adaptation
Inner and outer pockets for additional
accessories
Adjustable shoulder strap

TACIT
BAG
Genesis Tacit is a light and comfy bag
designed especially for carrying photographic
cameras; rest assured that its discreet design
will not attract any unwanted attention.
Discreet, casual design and druable
Polyester material with canvas texture
Enhanced acces to your gear through
a Velcro-fastened lid
Three external, flat pockets
Comfrotable shoulder strap
Padded walls and bottom of the bag
TACIT SMALL TACIT MEDIUM TACIT LARGE
External dimension:
15cm x 9cm x 15cm
External dimension:
23cm x 13cm x 20cm
External dimension:
34cm x 18cm x 30cm
BAGS

VIDEO
RIGS
CINE VSS
Cine VSS is a functional and versatile rig that
provides stable and comfortable work platform
for camcorder or DSLR camera.
It is based on widely used 15mm rail system
so it is very easy to expand basic rig setup with
additional elements. VSS allows you to mount
a follow focus system, matte box, microphone,
LCD screen, and much more. Rig is equipped
with a comfortable shoulder pad and two
grip handles. Their position can be adjusted
and tailored to user’s needs. The central element
of the Genesis Cine VSS is a mounting
platform on which you can attach the camera
directly, or through quick release plate (sold
separately). Cine Genesis VSS is made entirely
from aluminum components which makes rig
construction lightweight, rigid and durable at
the same time.
Stable and comfort work
Equipped with a shoulder pad
and two handles
Made of aluminium
15mm rail diameter
weight 1,55kg

RIG ACCESSORIES
CINE VSS
BALANCE BLOCK
Cine VSS Balance Block is a counterweight
for shoulder rigs (especially Genesis VSS, but
can be mounted on any 15mm rods). Thanks
to Genesis Balance Block it is possible to balance
the rig with a camera or SLR fixed on it
to increase working comfort. Genesis Balance
Block itself is made out of steel and rails are
made of aluminum, so it is durable and stable.
It weighs 1,5kg and comes supplied with two
15mm rods.
MAGIC ARMS
Genesis Magic Arms are a universal mount
which allows to connect video accessories and
small cameras to shoulder rigs, trolleys and
tripods.
Each of the arm is equipped with two standard
1/4” screws so it can be used with multiple video
and photographic accessories such as microphones,
screens, lamps, radio triggers, etc.
Three independently adjustable joints allows
you to change position of the arm freely. Arms
are made of aluminum, joints and clamps are
made of steel which ensures durability of the
product.
Three joints
Instant lock with only one screw
11.0 inches and 7.0 inches versions
VIDEO

VIDEO
TRIPODS
CVT-10
Smoothness of Movement
Mobility (78 cm folded width)
+90°(down) -75° (up) Range.
Tilt Force Adjustment
3,2kg Weight
Comfortable Case
Metal Spikes
Rubber Caps
CVT-20
Smoothness of Movement
+90°(down) -75° (up) Range
Tilt Force Adjustment
Solid Construction
Huge Load Capacity
Metal Spikes
Rubber Caps
Max Height 195 cm

TRIPOD
COMPARISON
SPECYFICATION CVT 10 CVT 20
MAX HEIGHT (WITH HEAD) 167 cm 195 cm
WORKING HEIGHT 1 73,3 cm 86 cm
WORKING HEIGHT 2 113 cm 133 cm
WORKING HEIGHT 3 157 cm 182 cm
SECTIONS 3 3
PANNING BASE TRAVEL 360° 360°
TILT RANGE +90° / -75° +90° / -75°
BASE DIAMETER 60 mm 80 mm
MAX LOAD (HEAD) 4 kg 10 kg
MAX LOAD (TRIPOD) 4 kg 50 kg
WEIGHT 3,24 kg 5,24 kg
HEAD DIMENSIONS:
LENGHT/WIDTH/HEIGHT
37,4 cm / 22,7 cm / 15,5 cm 42 cm / 18 cm / 13 cm
WARRANTY 6 years 6 years
VIDEO

Vol. 01