Lubricant Leaflet_140767_Datenblatt_United_Kingdom_screen

Bosch original greases and oils. Tested and recommended for Bosch power tools.
Basic guide to correct use of
greases and oils in repair
You will find detailed lubrication instructions in the spare
part documentation on the internet or on our Service DVD.
Not all greases are the same, and not all oils
are the same.
In addition to a base oil, lubricants usually contain
additives which give them certain characteristics.
▶ Fluidity
▶ Oxidation resistance
▶ Friction characteristic.
The base oil and the additives are precisely tailored
to each other and to the relevant requirements of
use. Original greases and oils from Bosch are
developed especially for Bosch Power Tools and
meet the same high quality standard as the tools
themselves.
What purpose do lubricants serve in a power tool?
Lubricants perform many important tasks: friction
and wear reduction, power transfer, cooling, vibration
damping, sealing, and corrosion protection. As
with all machine parts, lubricants are also subject to
aging and wear. They become dirty, overheat or dry
out. When this happens, or during every necessary
wear repair, they have to be replaced or replenished.
What has to be observed when greasing
and oiling during repairs?
Bosch original greases and oils must not be mixed
with each other, nor under any circumstances with
non-recommended greases and oils. The specified
quantities and the lubrication instructions for each
tool must be observed at all times.
Your advantages at a glance
Using Bosch original greases and oils during
repair pays off:
▶ The components of the tool deliver optimum
performance
▶ Abrasion and wear of the parts are as low
as possible
▶ The operating time between service intervals
is increased
▶ The service life of the tool is maximised
Subject to technical alterations | Printed in Germany | April 2014