Brother Printer Support 1-855-617-9111
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Brother</strong> <strong>Printer</strong> <strong>Support</strong> 1-<strong>855</strong>-<strong>617</strong>-<strong>9111</strong>
<strong>Brother</strong> <strong>Printer</strong> <strong>Support</strong> 1-<strong>855</strong>-<strong>617</strong>-<strong>9111</strong>
<strong>Brother</strong> <strong>Printer</strong> <strong>Support</strong> 1-<strong>855</strong>-<strong>617</strong>-<strong>9111</strong>
<strong>Brother</strong> <strong>Printer</strong> <strong>Support</strong> 1-<strong>855</strong>-<strong>617</strong>-<strong>9111</strong>
<strong>Brother</strong> <strong>Printer</strong> <strong>Support</strong> 1-<strong>855</strong>-<strong>617</strong>-<strong>9111</strong>
<strong>Brother</strong> <strong>Printer</strong> <strong>Support</strong> 1-<strong>855</strong>-<strong>617</strong>-<strong>9111</strong><br />
Whenever there is a paper jamming issue arises with <strong>Brother</strong> <strong>Printer</strong>, follow these steps mentioned<br />
below:<br />
Don't neglect to unplug the printer from the AC in the event that you endeavor this!<br />
•Evacuate any free paper in the<br />
•Press the Resume catch on the facade of the printer. stacking plate.<br />
•Evacuate stuck paper one sheet at any given moment, beginning in the center.<br />
•Check for any residual bits of paper.<br />
•Clearing the jam from the back of the printer<br />
•In the event that you can't get to the paper jam from the stacking plate, adhere to the guidelines to<br />
clear the paper from the back of the printer. For the most part, the back of the printer has either a back<br />
access entryway or a two-sided printing frill.<br />
•Evacuating a back access board.<br />
•You will find the control to open the printer. On the off chance that it's a handle, move it to the Unlocked<br />
position.<br />
•Evacuate the board and cautiously haul out the stuck paper.<br />
•You need to clean the little bits of paper. If you don't then it will again fail.<br />
•Supplant and secure the backboard.<br />
•Expel the two-sided printing assistant to clear the paper jam<br />
•Press both RELEASE catches on either end of the module in the meantime and expels it.<br />
•Evacuate the board and cautiously haul out the stuck paper.<br />
•Drive the module back on and adjust it properly.<br />
If the issue still continues, feel free to connect with the <strong>Brother</strong> <strong>Printer</strong> Customer <strong>Support</strong> Number on<br />
the toll-free number at the earliest to get instant solution to all your printer issues.
Change language