Tips to Choose the Right Jewelry Repair Shop

Tips To Choose The Right Jewelry Repair Shop
If your wedding ring or any other jewel has become damaged, you need to trust your precious
keepsake to an expert who offers jewelry repair in Albuquerque and well versed in restoring
precious diamonds and metals. Most importantly, they should understand the sanctity and
importance of your investment. Here we have mentioned a few tips to choose the right jewelry
stores for your jewelry and watch repair in Albuquerque NM.
Chain Repair
A chain after being repaired is never as strong as it was before it was broken. While most flat
chain repairs are nearly undetectable, if the chain is very small, lightweight or badly damaged,
there may be some stiffness in surrounding links after the repair is completed. Chains that are
more difficult to repair due to their complexities include link chains, like rope and cable chains,
and herringbone chains. Some jewelers may charge extra for these jewelry repairs.
Certified Experts
Look for jewelry stores in Albuquerque with certified jewelers on staff. This includes
certifications and education from respected institutions and associations like Jewelers of
America, the Gemological Institute of America (GIA), American Watchmakers Association
(AWA), American Gem Society (AGS) for specialty watch repairs.
Expertise and Trust
When consider having a jewelry repair in Albuquerque, you must have confidence in the skill of
your jeweler. If a jewelry store offers custom design work, most likely they have trained jewelry
craftsman on site to perform repairs in house. Of course, there are items like timepieces, watch
that may need to have repairs done off site. Start by checking that the jewelry store is a member
of Jewelers of America so you know your jewelry is in skilled hands and the repair will be
performed professionally and ethically.
Resizing a Ring
If too loose or too tight, there are a few ways a jeweler can resize your ring:
Spring inserts placed inside the shank adjusts to 1-2 full finger sizes.

Sizing beads: placed on the inside of the bottom of the shank, these accommodate
slight discrepancies in size for a half size or less
Cutting & soldering: A cut is made and metal is either added or removed to adjust the
size to fit. Sizing should be done at the center of the shank bottom, unless there are
quality marks or an inscription that precludes it. No seams should be visible when
finished.