2020 Magazine - Online Copy

Stanners TKR XT2 accessories
The TKR XT2 is available with a wide range of accessories to allow use across various sections of
the vehicle.
Punching kit TKR-STA-167
Rivet Clamp NB45 TKR-STA-1085
Length
Width
Height
Clamp Opening
Opening Depth
Weight
120mm
75mm
160mm
80mm
45mm
2.5kg
Hydraulic Riveters
Punching Die Ø6mm
Marking – Green
Part No: 25-00000004
Punching Die Ø6mm
Marking – Green
Part No: 25-00000003
Punching Die Ø8mm
Marking – Yellow
Part No: 25-00000007
Punching Die Ø8mm
Marking – Yellow
Part No: 25-00000006
Rivet Clamp NB130 TKR-STA-1086
Length 230mm
Width 75mm
Height 210mm
Clamp Opening 80mm
Opening Depth 130mm
Weight 6.2kg
Rivet Clamp NB240 TKR-STA-1087
Slide Bush Ø6mm
Marking – Green
Part No: 25-00000002
Slide Bush Ø8mm
Marking – Yellow
Part No: 25-00000005
Length
Width
Height
Clamp Opening
Opening Depth
Weight
390mm
75mm
350mm
140mm
240mm
11.6kg
Punching Die Holder Spanner Kit
Part No: 25-00000008 SW16/SW20
Part No: 25-00000018
Each pair is colour coded for easy identification.
The advanced trolley for
the TKR XT2 is the ideal
addition to keep your
riveter and all the
accessories safe and tidy.
With 2 lockable draws
and a lockable lower
storage section, the XT2
and all the accessories
including the blind riveter
kit can be securely stored
and organised.
The gun can be safely
hung on the side of the
unit, along with the
various arms for ease of
use between tasks in the
workshop.
XT2 Trolley STA169
Adaptors for XT2 10T + PNP90 6T anvil interchange
Short Adaptor
(for easy access)
Part No: TKR25-107
Standard Adaptor
Part No: TKR25-73
BMW Anvils for 3.5mm and 5.0mm rivets
Distance Bolt
Part No: TKR25-74
These specially designed force limited adaptors allow you to use
your current 6 ton anvil heads from the PNP90 on your XT2 unit.
3.5mm Rivets
Die and Mandrel Set
Part No: TKRBGR-24
These sets must be
used with the 10T/6T
adaptors for use on the
XT2.
5.0mm Rivets
Die and Mandrel Set
Part No: TKRBGR-23
Spanner Set
Part No: TKR-239
47
For Orders call: 01670514133