GME Supply Catalog Version 19.4

(9.5 m)
Design 4:1
GREENLEE REEL
STAND SPINDLE
Steel spindle with grooves to fit
reel stand rollers, for 683 reel
stand, 2-3/8” x 76” 5,000 lb
capacity.
684 - $259.99
647 For 687 reel stand
2-3/8” x 62” - $198.99
GREENLEE JACKSTAND REEL STAND
ASSEMBLY
Wide, welded steel base for added stability with 5/8” holes, roller bearings
fit in the spindle groove to keep the spindle in place and turning freely, (2)
stands and a spindle are required for a complete setup, 2,500 lb capacity,
base 24” x 23”, height 21” x 54”.
683 - $254.99
GREENLEE TELESCOPING REEL STAND
ASSEMBLY
Wide, welded steel base for added stability with 5/8” holes, roller bearings
fit in the spindle groove to keep the spindle in place and turning freely, (2)
stands and a spindle are required for a complete setup, base 14.5” x 20”,
height 13” x 28”.
687 - $179.99
LIFTING & RIGGING // REEL STANDS
SUMNER NO. 70
SCREW-TYPE REEL MAC REEL JACK
Screw-type telescoping, for 46” to 96” diameter reels, height:
21”-54”, capacity: 2,500 lbs, use with No. 71 spindle, selflubricating
bearings, built-in handle storage, patent pending
safety head.
780942 - $244.99
SUMNER NO. 60
SCREW-TYPE REEL MAC REEL JACK
Screw-type telescoping, for 26” to 56” diameter reels, height:
13”-27”, capacity: 2,500 lbs, use with No. 61 spindle, selflubricating
bearings, built-in handle storage, patent pending
safety head.
780941 - $174.99
SUMNER NO. 75
ECONO MAC REEL JACK
Lighter design that does require any loose pins, Selflubricating
roller bearings, no grease required, one-bolt
disassembly, no welding required for service, double
pronged pins, 23.75” to 52.75” range, 2,500 lbs capacity.
780935 - $218.99
SUMNER NO. 71
SPINDLE FOR
REEL MAC
Screw-type, diameter:
2-3/8”, length: 76”,
capacity: 5,000 lbs, use
with No. 70 Reel Mac Reel
Jack, all steel construction,
rugged design for job
site use.
780230 - $159.99
780229 For No. 61
reel stand 2-3/8” x
62” - $124.99
SUMNER HI FOLD-A-
JACK
Can be folded up for easy storage and
includes a carrying handle. Strut tension
plate for superior lateral support. Set screw
can lock jack head to stand. Built tough for
heavy use. Can be adjusted from 28” to
49”. 2,500 lbs load capacity.
781300 With vee head - $90.99
781301 With roller head - $112.00
SUMNER HI HEAVY DUTY
PIPE JACK STAND
Constructed of rugged 1” steel tubing,
tested by independent labs for excessive
loads. Features large adjustment handle,
quick-action lock washer, and 1-1/2” Acme
fine adjustment thread. Patented Fall Guard
feature allows 1” (25 mm) safety zone
around lock washer. Built for heavy use &
abuse. 2,500 lbs load capacity.
780375 With vee head - $81.99
780376 With roller head - $112.99
(800) 940-6762
91