120 Demense Catalogue 2020_v13_web

www.demesne.co.uk
BUSBARS (PS) &
ACCESSORIES
Touch protection for Fork and Pin Busbars
SUITABLE FOR CUTTABLE BUSBARS
BUSBAR TYPE
POLE WIDTH (PITCH)
1 - 4 phase Fork and Pin 17,6 -18 mm (cuttable)
PART NO. PK QTY €/EA £/EA
085990-2-4 10 1.15 1.04
Feed In Terminals Fork And Pin Type
PRODUCT FEATURES
> Rapid installation
> Safe bonding by means of screw clamping
> No special tool needed for crimping cable lugs
> Fingersafe according to DIN EN 50274
> General-purpose power directions (front / side)
MM2 TYPE PART NO. FORK/PIN DIMENSIONS (WXHXL) MM PK QTY €/EA £/EA
25 mm2 fork 084130-2-4 M6 x 1,3 x 16 mm 10 POA POA
25 mm2 pin 084530-2-4 4,2 x 1,3 x 13,5 mm 10 2.17 1.96
25 mm2 pin 084531-2-4 3,8 x 1,3 x 11,4 mm 10 3.33 3.00
50 mm2 fork 084150-1-4 M6 x 2,5 x 15 mm 3 POA POA
50 mm2 pin 084550-1-4 6,6 x 2,5 x 15 mm 3 5.15 4.64
Current Rating
1-PHASE
2,3 AND 4-PHASE
Busbar cross-section in mm2 10 12 16 20 25 36 10 16 25 36
Feed-in from side
maximum busbar current I S
/ Phase A 63 65 80 90 100 130 63 80 100 130
Feed-in from middle
maximum current per branch I E
/ Phase A 100 110 130 150 180 220 100 130 180 220
maximum feed-in current I E
/ Phase A
Dependent on the cross section
Feed-in at start of busbar
Feeding along the busbar or central feed-in
a n
a 4
a 3
a 2
a 1
a 0 a 1 a 2 a 3 a 4 a n
I S
I S1
I S2
I E = I S
I E = ∑ I S1 + I S2
For central supply, it has to be made sure that the sum of the outgoing currents a 0
at each bus branch is not
bigger than the above-mentioned max. busbar current Is / phase
DEMESNE ELECTRICAL Trade Price List 2020
REF 01/20
53