Catalog-2020

How-to
Basic Application Steps
1. The edge of the nail should be smooth;
if necessary, use a GelMoment Nail File
to gently file the nail.
2. Buff the nail surface well, including the corners.
Only buff, but do not polish or shine. Buffing will
help remove any natural oils from the nail surface,
which can inhibit the adhesion of the Gel Polish.
3. Wipe the nail clean with GelMoment Nail
Cleansers. Make sure nails are clean and dry
before applying the Gel Polish.
4. Before applying, gently roll the bottle between
the palms of your hands. Heavy shaking can
produce air bubbles.
5. Apply a thin coat of Gel Polish. Avoid getting any
polish on your skin or cuticles, as this can cause it
to peel. For best results apply polish over the nail
tips too.
6. Cure under your choice of GelMoment LED Lamp
until it automatically turns off. GelMoment Gel
Polish will cure in 45-60 seconds, depending on
the LED Lamp used.
Should you wish to add a second coat, repeat
steps 5 & 6.
NOTE: Gel Polish is sensitive to LED and natural light and
therefore cannot be left open near or come in contact with the
LED Lamp, or be used in direct sunlight or outdoors. Doing so
may result in premature curing of the unused polish.
22
Image provided by Independent Distributor: Sarah Jane Di Martino.