Catalog-2020

GELMOMENT GEL POLISH
To remove the gel polish, simply use your choice
of GelMoment Flake Off Remover or GelMoment
Remover Pads.
Removal Steps with flake off remover
1. Gently buff off the surface, to allow the Flake Off Remover solution to work
more effectively.
2. Apply a thick layer of Flake Off Remover over Gel Polish, avoiding the skin.
3. Let the product sit for 3 to 5 minutes. Multiple coats of polish or any top
coats added may require additional time.
4. Remove residue with GelMoment Cuticle Pusher.
5. Flake Off will remove at least the first coat of polish, but if you are wearing
multiple coats you may wish to add more Flake Off Remover to any of
the polish that remains, and repeat the above process until all polish is
removed.
6. If you are ready for your next manicure, apply your favourite Gel Polish,
following the recommended application instructions.
Pro Tip: to improve nail health, nourish your nails and cuticles between
manicures with our NailSpa products.
Removal Steps with REMOVER PADS
1. Tear across the dotted line and place your nail inside the pouch, underneath
the moist pad.
2. Remove the protective plastic strip on the outside of the pouch to reveal the
sticky tape below. This allows you to tightly wrap the pouch around your nail.
3. Leave inside for 5 to 10 minutes (depending on your nail type) and remove.
4. Use the GelMoment Cuticle Pusher to eliminate remaining residue.
5. If you are ready for your next manicure, apply your favourite Gel Polish,
following the recommended application instructions.
NOTE: For best results, use the Remover Pads in conjunction with our
GelMoment Remover Clips, an accessory that enhances the removal process.
23