KERBL Horse and Rider 2020

​
Frost Protection Thermostat
• suitable for all bowl and tube heating systems
• External probe ensures automatic switching on and off
• in the splash-proof housing
• max. permitted power 3.6 kW
• IP54
Frost Protection Accessories
The frost protection thermostat should be installed at
the coldest point.
Ref. no.
​
€
222794 1/30 ​
​
​
Extension for heating element
• also recommended when using the heaters in all other
drinkers made by other manufacturers
• suitable for heating rode 221760 and 221761
• Extension of 30 mm
• required for drinkers 22500, 22504 and 221871
• Material: brass
Ref. no.
Thread
​
€
221765 1/2“ IG / 1/2“ AG 1/150 ​
​
​
Frost Protection Heating 24 V
• for heating the spur line of waterers
• a 24 V transformer is required for operation
• IPX7
Ref. no. Heating output Length
​ ​
€
22358 15 W 1,5 m 1/60 720 ​
223581 30 W 3 m 1/60 720 ​
Aluminium Adhesive Tape
• for heat reflection on water pipes
• around 25 m aluminium adhesive tape is required
for a 3.5 m long 3/4“ pipe
​
Tip: You always need aluminium adhesive tape for plastic
pipes, otherwise there will be no heat conduction
Ref. no. Length Width
​
€
222809 100 m 50 mm 1/54 ​
Wrap the plastic water lines from
the heating cable assembly with
aluminium adhesive tape
246