PURESYS 2020 E-Brochure

The Ultra-Pure Fluid Transfer Specialist

Medical,

Pharmaceutical

Components and

Ready to use

Assemblies

Looking for

an online

version?

We have it!

Message from us

PureSys was incorporated as a response

to the market demands for ultra-pure fluid

transfer systems and components.

Based in Singapore, PureSys is ideally

located to assist and support industrial

and laboratory ultra-pure fluid transfer

needs in the greater ASEAN region.

Since 2019, PureSys has extended their

Product Range to providing ready-to-use

assemblies to help customers fast track

design, limit unwanted product exposure

and create a more efficient and controlled

process flow in the production stage.

Featured in

this Brochure

About PureSys

Our Vision

Our Mission

Saint Gobain Biopharmaceutical Tubings ......4-5

With PureSys, customers produce better, purer

products

We Ensure The Integrity Of Ultra-Pure Fluids By

Providing Best-In-Class Transfer Systems.

Saint Gobain Bio & Industrial Hoses ....................................6

Saint Gobain Bioprocess Bags ................................................... 7

CPC sterile connectors 8

Nordson Medical Connectors & Fittings9

Sanisure Single Use Assemblies 10-11

PureSys Cleanroom and GMP Facilities12-13

Additional Information 14-15

The Puresys Brand Message

The progress of human life relies upon scientific

advancement. Because of this, scientists and

industry specialists alike, demand ultra-clean

environments which ensure integrity in the

engineering and processing of fluids. As such,

the purest process chemicals, water and gases

are required to aid in the advancement of

humanity. This ultimately requires the elimination

of undesired particles in processing fluids. The

challenge is therefore in the preservation of

fluid integrity within various systems through the

reduction in risk of corruption at any point during

the transfer and storage of these fluids.

PureSys Pte. Ltd. (“PureSys”) strives to minimise

these risks in both industrial and laboratory

applications by specialising in the mechanisms

that ensure the integrity of ultra-pure fluids with

best-in-class transfer systems. This product line

includes tubes, hoses, fittings, connections, filters,

clamps and customised assemblies.. Focusing

on industries such as; Biomedical, Pharma,

Biopharma, Life Sciences, Chemical, F&B, Water

Treatment and biofuel, PureSys partners its

customers to deliver customised solutions that

meet the highest standards in ultra-pure fluid

transfers.

From Retail to E-Tail

The Ecommerce function is now live on

our website. Customers can now come to

explore, learn about and purchase products

at ease.

We would be uploading more information

and useful tools in to help you better identify

and select the right product for your transfer

processes.

2 | Visit our Website and Ecommerce Function www.puresys.com.sg Drop us an Inquiry today! sales@puresys.com.sg | 3

Biopharmaceutical tubing

to meet any application need

Saint-Gobain’s tubing portfolio encompasses a range

of material types to meet the myriad needs of the

bioprocessing industries. Offered in standard and custom

sizes, our biocompatible tubes are supported by Validation

Guides and technical expertise. Combine these tubing

solutions with Pure-Fit® fittings, Saint-Gobain single-use

bags and Saint-Gobain filters to create single-use systems

that protect your most critical bioprocessing fluids.

Should you have a process that requires a higher

pressure and volume in fluid transfer, consider

implementing the use of a hose instead. Saint

Gobain carries the full range of Bio-processing Hoses,

contact our sales to find out more, or browse through

our Hose recommendations in the next section!

Sizing Reference

Bioprocessing Selection

Common Tubings

Actual OD Average ID Wall Thickness

Actual

Outside Diameter

Average

Inside Diameter

Tubing

Wall Width

C-Flex® 374 and

082 are specifically

designed for aseptic

welding connections

and sealing disconnections.

These

translucent TPE formulations

allow fluid visibility in biopharmaceutical

applications. C-Flex is

moldable, bondable, formable and

ideal for single-use assemblies, overmolds

and manifolds.

Sani-Tech® STHT-C

and STHT-65 are widely

validated platinum-cured

silicone tubing. Ideal for

bioprocessing applications,

Sani-Tech STHT-C

and STHT-65 tubing may

be sterilized via gamma irradiation or autoclave.

Laser-marked part numbers and

lot codes provide product traceability.

Sani-Tech STHT-C has a nominal hardness

of 50-Shore A and Sani-Tech STHT-65

has a nominal hardness of 65 Shore A.

PharmPure® is the

next generation peristaltic

pump tubing for

the biopharmaceutical

industry. Designed

with multiple layers, its

low spallation properties

reduce downstream particle

contamination.

C-Flex® 374

C-Flex® 082 C-Flex® 072

C-Flex®

Braided

Sani-Tech®

STHT®-C

Sani-Tech®

STHT-65

Sani-Tech®

Ultra-C

Sani-Tech®

Ultra-65

Material Type TPE TPE Braided TPE Silicone Silicone

"Hardness (typical)" 60 Shore A 60 Shore A 60 Shore A

Appearance Translucent Opaque

Translucent,

reinforced

"50 Shore A

65 Shore A"

"50 Shore A

65 Shore A"

Sani-Tech®

STHT®-R

Braided

Silicone

Pharma-

Pure®

PharMed®

BPT

PharmaFluor®

FEP

TPE TPE Fluoropolymer

65 Shore A 65 Shore A 64 Shore A 55 Shore D*

Translucent Translucent Translucent Opaque Opaque Translucent

Peristaltic Pump Life + ++ NR + ++ NR +++ +++ NR

C-Flex® 072 TPE tubing

is recommended

for peristaltic pumping

applications. Also

designed for aseptic

welding connections

and sealing

disconnections, its opacity protects

light-sensitive fluids in biopharmaceutical

manufacturing. C-Flex is

moldable, bondable, formable and

ideal for single-use assemblies, overmolds

and manifolds.

Sani-Tech® Ultra-C and

Ultra-65 are the next

generation in ultra-pure

platinum-cured silicone

tubing. Ultra-low extractables

and longer peristaltic

pump life make this

tubing ideal for the biopharmaceutical

industry. Laser-marked part numbers and

lot codes provide product traceability.

Sani-Tech STHT-C has a nominal hardness

of 50-Shore A and Sani-Tech STHT-65

has a nominal hardness of 65 Shore A.

PharMed® BPT is

the trusted standard

for peristaltic pump

applications. With a

long history of success

in biopharmaceutical

applications, PharMed

BPT will withstand the most aggressive

peristaltic pump conditions.

"Extraction Profile" + + + ++ +++ ++ + + +++

"Working Pressure

>90psi (690 kPa)"

Autoclave

Sterilization

No No Yes No No Yes No No Yes

Yes Yes Yes Yes Yes Yes Yes Yes Yes

Gamma Sterilization Yes Yes Yes Yes Yes Yes Yes Yes NR

C-Flex® Braided is

constructed of C-Flex

082 translucent resin,

a commonly validated

TPE material in biopharmaceutical

applications,

and reinforced

with polyester yarn. C-Flex Braided

is specially constructed to meet the

critical demands of high pressure fluid

processing in pharmaceutical and

biopharmaceutical applications.

Sani-Tech® STHT-R

is a braid-reinforced,

platinum-cured silicone

tubing developed

for high-pressure fluid

transfer applications.

Sani-Tech STHT-R

withstands repeated autoclaving and

is manufactured with Sani-Tech 65

resin, a high purity and commonly

validated material in the biopharmaceutical

industry.

PharmaFluor FEP is

an ideal choice for

applications requiring

high purity or contact

with aggressive

chemicals. The low

absorption characteristics

and low extractables of PharmaFluor

FEP make it especially suitable

for highly sensitive fluid transfer

during purification and aseptic filling

operations.

Max Temp

135°C

(275°F)

135°C

(275°F)

135°C

(275°F)

260°C

(500°F)

260°C

(500°F)

260°C

(500°F)

NR Not Recommended + Good ++ Very Good +++ Excellent * Shore D is a higher (harder) scale of hardness than Shore A.

135°C

(275°F)

135°C

(275°F)

Minimum Temp -45°C (-50°F) -45°C (-50°F) -45°C (-50°F) -62°C (-80°F) -62°C (-80°F) -62°C (-80°F) -40°C (-40°F) -40°C (-40°F)

General Chemical

Resistance

"Can be included in

molded assemblies"

++ ++ ++ ++ ++ ++ ++ ++ +++

Yes Yes Yes Yes Yes Yes Yes Yes No

204°C

(400°F)

-73°C

(-100°F)

4 | Visit our Website and Ecommerce Function www.puresys.com.sg Note* This brochure only highlights the common product and main

Drop us an Inquiry today! sales@puresys.com.sg | 5

product categories of each brand. Should you have specific requirements

or would like us to help evaluate the most suitable components for your

process - feel free to contact our sales to find out more!

Bio & Industrial Hoses

To meet all your

production requirements

Saint-Gobain is the market leader in premium quality hoses and fittings. These

hoses come in a variety of chemical resistance, flexibility, a wide range of media

compatibility and more. All of our hoses are designed and tested to fulfill a range

of demanding global certifications, performance, and safety standards.

Our team is equipped with technical and practical knowledge to help you

select the right hoses. Check with us for a free consultation today.

SANI-TECH®STHT-R / R-HD

SILICONE HOSE

Sani-Tech® STHT ® R/R-HD is a braidreinforced,

platinum cured silicone hose

able to withstand repeated sterilization

and resists adherence of blood and

other sanitary fluids.

Versilon FGR Food

Grade Rubber Hose

The flexibility and tough construction

of Versilon FGR hoses are specially

designed for the demanding conditions

of food processing plants. These

hoses can withstand rough handling

and high temperatures in a variety of

applications.

SANI-TECH®STHT-WR

SILICONE HOSE

Sani-Tech® STHT®-WR is a wire

reinforced, platinum-cured silicone

hose, the steel helix maintains high

pressure ratings with full vacuum

capabilities.

Versilon BCSR Anti-Static

Chemical Transfer Hose

Versilon BCSR hose is constructed with

anti-static chemical resistant PTFE inner

core and reinforced with an acid resistant

EPDM outer cover. This design provides a

much reduced force-to-bend and smaller

minimum bend radius as compared to

smooth bore rubber covered hoses.

Bioprocessing Selection

Versilon Sight

Flow Indicators

Versilon Sight Flow Indicators permits

visual inspection of conveyed material,

allowing flow, aeration, turbulence and

cleanliness checks.

Versilon

TLCT-WTLCT-SFTL Hose

Versilon TLCT hose is constructed

with a white FEP inner core and

reinforced with multiple polyester

plycords and EPDM rubber. The kinkresistant

EPDM reinforced design

delivers extended service life and

durability.

Chemical and Corrosion Resistant HDPE HoseGard

HoseGard, designed to work with any type of hose within a large range of OD sizes, features

a hard, smooth finish and is constructed of corrosion and chemical resistant HDPE material.

HoseGard’s durable construction resists damage from abrasive or corrosive environments

and reduces wear by elevating the hose and hose ends. HoseGard protects hose ends

from ground contact and elevates the hose cover during operation. This results in longer

service life and cost savings compared to purchasing replacement hoses.

Single Use BioProcess Bags

To meet all your

production requirements

Small Volume Bags

50 ml to 20 liters

• Integrated handle

• Integrated hanging capability

• Needle-free sampling port

• May be used with sterile welder

• Available as manifold system

Bags for Cylindrical Tanks

50 liters to 750 liters

• Integrated handle

• Integrated hanging capability

• Needle-free sampling port

• May be used with sterile welder

• Available as manifold system

Bags for Rectangle Tanks

50 liters to 3,000 liters

• Designed to fit your existing tank

• Top or bottom drain

• Available with 1” ID tubing

• Recirculation loops

• Integrated sampling systems

From Design to Delivery

We Provide Quality Products

Tailored to Your Exacting Specifications

Nylon

Tie

EVOH

Tie

LDPE

TECHNICAL BULLETIN

Multilayer Film Structure

Saint-Gobain single-use bags are

constructed of multilayer film optimized

for bioprocess production applications.

Film materials are consistent throughout

the product range, and are certified to

be free of materials of animal origin.

Offering outstanding biocompatibility,

chemical compatibility, barrier and

strength properties, Saint-Gobain films

meet the most demanding bioprocess

applications.

Fluid Contact Layer - Low

Density Polyethylene (LDPE)

Provides outstanding biocompatibility

with broad chemical compatibility

for safe handling of a wide range of

biopharmaceutical liquids.

Gas Barrier Layer- Ethyl

Vinyl Alcohol (EVOH)

Provides excellent barrier to the

transmission of oxygen and carbon

dioxide.

Strength Layer - Nylon

Provides outstanding impact and tear

resistance, optimizing overall toughness

of the bag.

Tie Structure

Multiple materials provide bonding

between layers and add to overall

performance of the bag.

Film Thickness

Liners: 5 mil

50 ml to 1 liter bags: 7 mil

2 liter to 2500 liter bags: 12 mil

Bags

up to 1L

7 mil

Layer

Liners

5 mil

Layer

Bags

2L+

12 mil

total






Quick, Simple

and Sterile

Connections

Fluid Management

Components

AseptiQuik S, G & L Series

Bio-process Fittings

Confidence at every

point of connection

AseptiQuik C & X Series

Specialists in

Pharmaceutical Development

Tube Fittings

CPC (Colder Products Company) is the leader in the design and

manufacture of single-use connection technology and connectors for the

life sciences markets. They offer a wide variety of bioprocessing solutions

including sterile connect, sterile disconnect, SIP connections and quick

connects. CPC’s innovative designs provide flexibility for biopharmaceutical

manufacturers to easily combine multiple components, single-use or

hybrid systems including process containers, tubing manifolds, transfer

lines, bioreactors and other bioprocess equipment.

Robust and easy-to-use single-use connectors from CPC maintain

flow path sterility and integrity while enabling biopharmaceutical

manufacturers to improve production yields, decrease time-to-market

and reduce costs. CPC’s genderless sterile connectors simplify process

integration, maximize flexibility and streamline supply chain efficiencies.

SPECIFICATION

Featured Product

ASEPTIQUIK® S SERIES CONNECTORS

PRESSURE

Up to 60 psi, 4.1 bar

TEMPERATURE

39°F to 104°F (4°C to

40°C)

STERILIZATION

Gamma: Up to 50kGy

irradiation Autoclave

High Temp (HT)

Version: Up to 266°F

(130°C) for 60 minutes

TERMINATION SIZES

1/8”, 1/4” and 3/8” ID hose

barb (3.2mm, 6.4mm

and 9.5mm), 1/4” and

3/4” sanitary and MPC

insert

MPC/MPX Series

SANIQUIK TM Series

STEAM-THRU ® Series

Nordson MEDICAL is a global expert in the design, development,

and manufacturing of complex medical devices and component

technologies while serving biotechnology manufaturers the world

over, providing world-class single-use fluid transfer components to

facilitate breakthrough advances in pharmaceutical development.

Nordson MEDICAL’s product line spans across process management

components, like PharmaLok, CYLINDRAFlow, quick connect fittings,

luers, and tube-to-tube fittings, to effortlessly and securely connect

different elements of fluid administration devices. Additional devices

like stopcocks and check valves are also available.

SPECIFICATION

Featured Product

CYLINDRAFLOW

MATERIALS

Body & flow sector - gamma stable

polycarbonate, internal spring - 316 stainless

steel, gasket - platinum-cured silicone

OPERATTING PRESSURE

15psi (1.0 bar)

FITS TUBING IDs

3/8” (9.5 mm)

BARB

600 series

FEATURES AND BENEFITS

• Can accommodate up to 5 fluid lines

• No pressure drop as fluid moves around &

through the ports

• Intuitive push-to-turn flow sector

• Materials meet USP Class VI & ISO 10993

criteria

• Gamma radiation stable

• Can be daisy chained for additional ports

• Etched data code for easy access

to product resources and material

information

Quick Connects

Needlefree Valves

Medical Check Valves

For the full

selection,

please contact

our sales team

FLIP

CLICK

PULL

Sanitary Series

Customized parts






Closed System

Solutions from Sanisure

Innovative

Solutions

From Sanisure

SaniSure was built around the idea of bringing innovative solutions to

help solve fluid transfer problems. Their trademark SaniSure ® Cap2v8 ®

(“captivate”), was designed to capture, store and transfer high-purity

fluid in a way that is unique to the single-use market.

The special molded design of the Cap2v8 assembly creates a closed

sterile system that protects product integrity and provides an

aseptic seal for high purity biologicals, reducing the possibility of

contamination and product loss often associated with manual

processes and designs.

Adopting these assemblies allow for one to reduce labour and

installation time, eliminate cleaning validations and helps you

to produce a more cost-effective system.

Solution Based

Innovation

SaniSure’s mission is to combine deep expertise, integrity

and industry knowledge to produce customized solutions

and to maximize efficiencies, minimize costs and alleviate

risks in the production of biopharmaceutical processes.

Cap2v8 Family of Solutions

Mixed4Sure

With more than 150 years of combined design and

engineering experience, the Sanisure team can handle issues

from your process development group to the most

stringent requirements of your GMP processes group.

As an integral part of Sanisure’s Solution Based Innovation

process, every custom assembly is capable of meeting the

highest standards of regulatory requirements.

Transition

Innovative Solutions

Assessory Kit for

Glass BioReactor

LAST DROP

Last Drop is a rigid

dip tube, specifically

designed to reach the

bottom of any container,

allowing for the return

of every “last drop”. It’s

design also positions itself

out of the way from a stir

bar.







*Product photos within these pages are meant for Illustration Purposes only.

All PureSys Custom Assemblies are kept strictly confidential between our customers

Custom

Cleanroom

Assemblies

with PureSys

Limitless Possibilities

To provide fuller solutions to South East Asia’s fluid transfer

requirements, PureSys set up an ISO 7, Grade Grade C(a)

Cleanroom in Singapore. Every area of this controlled

space has been thoughtfully designed with the goal of both

efficiency and versatility, giving us the flexibility to run a

multitude of production/process configurations based on

your individual project requirements.

Backed with both knowledge and support from

our renowned component suppliers, PureSys

holds the unique position to integrate the special

traits of each component, into a single assembly

to fit your exact flow requirements.

To aid in your validation processes, PureSys has

additionally upgraded our warehouse to comply with

cGMP standards and enhanced our ISO procedures

to ensure full Product Traceability, Production Control

and Quality Assurance within each cycle.

We are now able to provide fully customizable ready-to-use

assemblies to help fast track design, limit unwanted product

exposure and create a more efficient and controlled

process flow in your trial and production stages.

Precision Equipment Sanitary Packaging cGMP warehouse area







We are

here to help

Personalized

Service

Process

Planning

Data, Information

and Insights

PureSys partners with our customers to

deliver customized solutions that meet the

highest standards in Ultra-Pure Fluid Transfers.

Contact a local representative or visit

our Website/Linkedln Page today!

Supplies featured in this brochure:

Saint Gobain | www.saint-gobain.com

CPC | www.cpcworldwide.com/bio

Nordson Medical | www.nordsonmedical.com

Sanisure | www.sanisure.com

Get all the

latest Updates

by connecting

with us Online!

Linkedin

Newsletter

81, Genting Lane, #04-01/02,

Everich Industrial Building,

Singapore 349566

+65 6291 1177 (10 lines)

sales@puresys.com.sg

www.puresys.com.sg

© Copyright 2020, PureSys Pte Ltd

PURESYS 2020 E-Brochure

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?