HISS - Magnetic Field Sensors
Magnetic cylinder sensors are used mainly to monitor the piston positions on cylinders and grippers. The field of the magnet integrated in the piston is detected by the sensor through the actuator wall.
Magnetic cylinder sensors are used mainly to monitor the piston positions on cylinders and grippers.
The field of the magnet integrated in the piston is detected by the sensor through the actuator wall.
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>HISS</strong> – <strong>Magnetic</strong> <strong>Field</strong> <strong>Sensors</strong><br />
Miniaturised, robust sensor<br />
for all cylinder types
<strong>HISS</strong> – <strong>Magnetic</strong> <strong>Field</strong> <strong>Sensors</strong><br />
<strong>Magnetic</strong> cylinder sensors are used mainly to monitor the piston positions on cylinders and grippers.<br />
The field of the magnet integrated in the piston is detected by the sensor through the actuator wall.<br />
Due to the small size and the various mounting elements that are available for the sensor, it fits all types<br />
of cylinders from current manufacturers.<br />
Properties:<br />
- Contact-less and wear free sensors for all common cylinder types<br />
- Various mounting elements are available<br />
- Extremely robust design for the harshest environments<br />
- Low storage costs (only one type of sensor for all cylinder variants)<br />
- When exchanging the sensor, it is usually not necessary to adjust the switchpoint again<br />
- Switch point display (LED) is highly visible due to the transparent housing,<br />
simplifies adjustment of switchpoint<br />
- Suitable for high speed movement<br />
- EMC / ESD protected<br />
- Customised designs upon request (e.g. connector, cable lengths etc.)<br />
Technical data:<br />
Operating voltage<br />
Connection interface<br />
Output type<br />
Output<br />
Protection class<br />
10 V to 30 V<br />
M8x1 connector<br />
Open collector pnp logic<br />
Short-circuit proof, overload-proof, reverse polarity<br />
protected<br />
IP67<br />
Operating temperature -30 °C to 85 °C<br />
Cable lengths<br />
200 mm 300 mm or 600 mm<br />
Sensor housing view<br />
Dimensions<br />
Plug connector view<br />
03/2020 Subject to change. All rights Hirschmann Automotive GmbH.<br />
Hirschmann Industrial Components<br />
Oberer Paspelsweg 6-8<br />
6830 Rankweil, Austria<br />
Sven Capelli<br />
T +43 (0)5522 307 325<br />
M +43 (0)664 1916 657<br />
sven.capelli@hirschmann-automotive.com<br />
www.hirschmann-automotive.com
Change language