Arctic Heat Pump for Hot Water

https://www.arcticheatpumps.com/

Arctic Heat Pump for Hot Water
https://www.arcticheatpumps.com/

▫
▫
Are you looking to buy the high-performance and cost-effective heat pumps available on the
market? If yes, then you should look no further than Arctic Heat Pump for hot water. This
heat pump is perfectly engineered and designed to make it the most efficient cold climate
heat pump on the market. It’s available at half of the price of a traditional geothermal heat
pump.
Check out the reasons why you should invest in Arctic series heat pump:
▫ Integrated Heating –
▫
Arctic heat pump is able to control entire heating and cooling requirements of every home
including the hot water at home. This heat pump integrates with different heating sources
like radiant floor heating or cooling, central air handlers for forced air, split fan coils for
room heating, and low temperature radiators. It can integrate to any hot tub or pool to
deliver enormous amount of heat by using titanium heat exchangers.
3

This heat pump comes with the Out Door Unit (ODR) which has everything you need in one
case (monobloc). It means, you don’t need to hire a refrigeration mechanic. All you need is
to do electrical connection with a waterproof outdoor rated disconnect. This system needs a
240 VAC connection that comes along with a 20, 30 and 40 amp dedicated breaker
depending on the size of the heat pump.
Built-in Backup Facility –
The heat pump can help you control the backup heating circuit present in the buffer tank
while making the integration with the internal heater quite simple and effective. When the
heat pump can’t keep up, the cold weather heat pump will give the signal to backup heater.
It makes sure that there’s no wastage of energy with two competing heat sources.
However, the Arctic heat pump comes with EcoUltra Buffer or boiler tanks with additional
features like insulation and internal ports for the temperature probe. All of the features allow
the heat pump to provide more accurate temperature readings.
https://www.arcticheatpumps.com/
4

Expandability
▫ With the state-of-the-art technology, you are able to combine heat pumps
together to form larger heating systems as needed. When you use MX controller,
you can add up to ten heat pumps. The Arctic series design works in parallel so
that each unit has its own pump. But the controller will handle all the heat pumps
like they’re one large heat pump.
▫ User-Friendly Controller –
▫ Moreover, the Arctic heat pumps utilize simple yet user-friendly differential
controller with a tank thermometer probe. This tank has a special copper probe
port insert both at the top and bottom so that you can measure the tank
accurately.
https://www.arcticheatpumps.com/
5

The heat pump will be optimized automatically to attain the set design temperature for the
tank. When the weather changes, the heat pump will change by using only exactly what it
requires to keep the buffer tank at the set temperature. It can be done by changing the
frequency of the DC Inverter Compressor to increase or decrease the power as required.
Bottom Line –
Want to know more about Arctic Heat Pumps? Feel free to visit our website at
https://www.arcticheatpumps.com/how-cold-climate-heat-pumps-work.html. For
more information, feel free to get in touch with us at
https://www.arcticheatpumps.com/contact-us.html.
https://www.arcticheatpumps.com/
6

7

Contact us
▰ 305 McKay Unit#20, Winnipeg, MB R2G 0N5, Canada
▰ sales@arcticheatpumps.com
▰ +1 (866) 800-8123
▰ https://www.arcticheatpumps.com/
8