Instrumentation Process Control - AR Thomson Group

Instrumentation
Process Control
Product Selection Guide

2
Enclosures
Table of Contents
Analytical Systems
Pneumatic
Ball Valves Compression Fittings
Introduction. . . . . . . . . . . . . . . . . . . . . . 2
Fittings . . . . . . . . . . . . . . . . . . . . . . . . . 4
Valves
Ball/Plug Valves . . . . . . . . . . . . . . . . 6
Check Valves . . . . . . . . . . . . . . . . . . 8
Filters. . . . . . . . . . . . . . . . . . . . . . . . .10
Relief Valves . . . . . . . . . . . . . . . . . . .11
Bleed and Purge Valves . . . . . . . . . .12
Metering Valves. . . . . . . . . . . . . . . . .13
Needle Valves . . . . . . . . . . . . . . . . .14
Manifold Valves . . . . . . . . . . . . . . . . .16
Diaphragm Valves . . . . . . . . . . . . . . .18
Regulators
Pressure Regulators . . . . . . . . . . . . 20
Back Pressure Regulators. . . . . . . . 22
Vaporizing Regulators . . . . . . . . . . . 23
Flow Controllers . . . . . . . . . . . . . . . . . .24
PFA/PTFE Products . . . . . . . . . . . . . . 25
Analytical Systems . . . . . . . . . . . . . . . 26
Hose/Tubing/Quick Couplings . . . . . . 28
Tools and Accessories . . . . . . . . . . . . 29
Sanitary and BioPharmaceutical . . . . 30
Instrumentation Group of Parker Hannifin
The Instrumentation Group of Parker Hannifi n is
dedicated to being the global leader in the design,
manufacture and distribution of high quality, critical
fl ow and ultra high purity components for the
Petrochemical, Chemical Processing, Oil and Gas,
Power Generation, Water Analysis, Biopharmaceutical,
Semiconductor Manufacturing and Analytical
Equipment industries.
With 11 manufacturing plants and over 300 authorized
distributors worldwide we can provide local
inventory and technical support to our customers
anywhere in the world.
Parker Hannifi n Corp.
Parker Hannifi n is the world’s leading diversifi ed
manufacturer of motion and control technologies
and systems, providing precision-engineered
solutions for a wide variety of commercial, mobile,
industrial and aerospace markets.
• 263 manufacturing sites around the world
• 8,200 distributors
• 400,000 customers
• 3,200 product lines
• Listed as PH on the NYSE

Valves
Pressure Regulators
Premier Customer Service
The Instrumentation Group is driven to provide our
customers with premier customer service through
on time delivery of quality products and value
added services such as the Verifl o Division Express
Service Program, custom assemblies and selection
safety and installation training.
Engineering Excellence
By remaining focused on our customers we have
been able to introduce products that not only solve
our customer’s business challenges but address
specifi c industry needs and issues.
Using the latest in virtual engineering tools, Parker
Instrumentation engineers have reduced the time
to develop, test and manufacture our latest product
innovations.
To assist our customers with their designs, our 2D
and 3D CAD drawings are available online.
Quick Couplings
Heat Code Traceability
Parker Hannifi n’s Instrumentation Group offers
Heat Code Traceability (HCT) to meet or exceed all
applicable specifi cations to assure our customers
that they are working with a high quality product. It
acts as an assurance for today and for tomorrow.
These specifi cations ensure high quality instrumentation
components for use in fossil fuel power plants,
chemical refi neries, general instrumentation and
processing plants. Requirements are now emerging
in the semiconductor and pharmaceutical industries.
Not only are the materials continuously monitored,
but Parker adheres to a formal, documented Quality
Assurance Program that controls manufacturing,
marking, testing and examination procedures,
cleaning and packaging.
HCT is offered on the following quality stainless
steel components:
• CPI and A-LOK ® Tube Fittings
• UltraSeal and VacuSeal Fittings
• Ball, Needle and Check Valves
• Instrumentation Pipe Fittings
• Orbital Tube Weld Fittings
• MiniButtweld Fittings
• Filters
Pipe Fittings
3

4
Enclosures
Analytical Systems
Pneumatic
Ball Valves
Fittings
Compression Fittings
Parker Instrumentation Tube Fittings are designed as leak-free
connections for process, power, and oil and gas instrumentation
applications handling liquids, gases and chemicals.
Parker’s instrument tube fi ttings have been engineered and
manufactured to consistently provide the highest level of reliability.
However, no system’s integrity is complete without considering the
critical link, tubing.
Proper tube selection and installation are key ingredients in
building leak-free reliable tubing systems. Parker instrument
fi ttings are designed to work on like materials therefore, stainless
steel fi ttings should be used only with stainless steel tubing. The
practice of mixing materials is strongly discouraged. The only
exception is brass fi ttings with copper tubing.
All working pressures have been calculated using the maximum
allowable stress levels in accordance with ANSI B31.3.
CPI Fittings (Catalog 4230/4233)
Three piece simple design to work
on all instrumentation grade tubing
Molybdenum Disulfi de coated nuts
to prevent galling and provide
lubrication
Single ferrule system treated with
Suparcase technology to insure
sealing
A-LOK ® Fittings (Catalog 4230/4233)
Industry standard design for all
instrumentation grade tubing
Silver coated threads to
reduce galling
Superior body seat surface fi nish to
seal gases and liquids
Single ferrule technology to provide
excellent anti-vibration performance
Excellent in high thermo cycling
applications
Back ferrule is treated with
Suparcase technology to provide a
strong mechanical grip on the tube
Industry double ferrule design for
system specifi cations

Valves
Pressure Regulators
MPI Fittings (Catalog 4234)
Compression fi tting for medium
pressure applications up to 15,000
psi (1034 bar)
Inverted body and nut design for
added strength with thick-wall tubing
Longer thread area for improved
performance and resistance
to vibration
Phastite ® (Catalog 4235-PH)
Option for welded systems
Simple assembly process provides
high integrity connections, fi rst time
every time
Installation time reduced to seconds
Quick Couplings
Molybdenum Disulfi de coated nuts
to prevent galling and for higher
temperature applications
Installation and rework time reduced
by 50%
No loose parts, supplied factory
pre assembled
Permanent push fi t tube connector
with working pressures up to
13,300 psi (917 bar)
Instrumentation Pipe Fittings (Catalog 4260)
Manufactured from 316 stainless
steel for superior corrosion
resistance
Available with NPT and ISO
thread confi gurations
All exposed threads protected to
prevent damage
All pipe threads meet ANSI B1.20.1
requirements
Welded Fittings (Catalog 4280)
Available in socketweld,
Permanent, leak free connection
buttweld and automatic
For critical applications and high
buttweld connections
temperatures such as steam
Manufactured to meet ASME
Section III, and ANSI B31.1
and B31.7 codes
Fitting Working Pressure Connection Type Size Range
CPI Instrumentation Tubing* Single ferrule compression 1/16" - 2" Tube Diameter
A-LOK ® Instrumentation Tubing* Double ferrule compression 1/16" - 2" Tube Diameter
MPI Up to 15,000 psi (1034 bar) Inverted compression 1/4" - 1" Tube Diameter
Phastite ® Up to 13,300 psi (917 bar) Permanent crimp* 1/4" - 1/2"
Weld-lok Instrument Tubing* Tube Socket Weld 1/8" - 2" Tube Diameter
Pipe Up to 6000 psi (414 bar) NPT Pipe Thread 1/16" - 2" Pipe Size
Pipe Adapters Up to 6000 psi (414 bar) NPT, BSPT, and BSPP Pipe Threads 1/8" - 1"
*Maximum suggested working pressure as indicated in Instrument Tubing Selection Guide Bulletin 4200-TS.
Pipe Fittings
5

6
Enclosures
Valves
Analytical Systems
Pneumatic
Ball Valves Compression Fittings
Ball/Plug Valves
Parker ball and plug valves, with excellent temperature and
pressure characteristics, are well established for power, process
and instrumentation applications as on/off/diverter or selector
valves. Options include lockout devices and round, stainless steel
or T-bar handles. Cleaning options include O 2, high purity and
grade A. Available with CPI , A-LOK ® , male and female NPT,
UltraSeal and VacuSeal end connections.
MB Series (Catalog 4121-MB)
One piece compact barstock design
Center off position for 3-way
2-way, inline, angle; 3-way, 4-way
and 5-way
B Series (Catalog 4121-B)
2-way, 3-way diverting or spring
loaded 3-way selector designs
Wide temperature application range
-65°F (18°C) to +450°F (232°C)
Rated for up to 6000 psi (413.7 bar)
Patented seat design
Standard drop-in replacement
Widest variety of seats, seals and
port connections
Connections include CPI ,
A-LOK ® , male and female NPT,
UltraSeal and VacuSeal SWB Series (Catalog 4125-SWB)
Zero clearance body allows repairs ISO-type actuator mounting design
in fi eld
Available up to 1" full fl ow design
Spring loaded seats and stem seals
Fully enclosed body bolts
HB Series (Catalog 4121-HB)
Compact FNPT version for tight
work areas
Full operating pressure in
any port
PEEK trunnion bearings provide
high cycle life
10,000 psi (689 bar) rating with
PEEK seats
Excellent for CNG

Valves
Pressure Regulators
Valve
Groups
Ball/Plug
Valves
Model Product
Series Description
MB
Mini Barstock
Ball Valve
B Ball Valve
SWB
Swing Out Ball
Valve
HB Ball Valve
MPB
Med. Pressure
Ball Valve
PR Plug Valve
HBV Ball Valve
Maximum
Operating
Pressure
3000 psi
207 bar
6000 psi
414 bar
2500 psi
172 bar
10000 psi
690 bar
20000 psi
1379 bar
3000 psi
207 bar
6000 psi
414 bar
MPB Series Ball Valve (Catalog 4234)
2-way and 3-way ball valve for
severe service applications
PR Series (Catalog 4126-PR)
Low operating torque
Optional locking device, downstream
vent and metal tee handles
Temperature Cv Body Material Actuation Seat/Seal Material
Stainless Steel
Alloy
Manual
Pneumatic
Electric
PCTFE
Buna-N Rubber
Ethylene Propylene
Rubber
Highly Fluorinated
Fluorocarbon
Fluorocarbon
Rubber
Brass
Min Max Max
-65 F
-54 C
300 F
149 C
11.00 x x x x x x
-65 F
-54 C
400 F
204 C
6.40 x x x x x x x x x x x x x
-65 F
-54 C
600 F
316 C
35.00 x x x x x x x x x x
-65 F
-54 C
400 F
204 C
1.00 x x x x x x x x x
-10 F
-23C
400 F
204 C
8.80 x x x x x x x x x
-10 F
-23C
400 F
204 C
3.20 x x x x x x
-65 F
-54 C
450 F
232 C
x x x x x x
PFA
GRAFOIL ®
Quick Couplings
Designed for 1/4 and 1/2 turn media
shutoff or switching applications
Typically used in laboratories
Most compact 90° actuated valve
Pneumatic/Electric Actuators (Catalog 4123)
60 Series pneumatic actuators
provide 90° and 180° rotation in
both double acting and spring return
models
HBV Series (Catalog 4190-HV)
Suitable for the most demanding
applications in the oil, gas and
process control industries
Integral compression ends available,
eliminating taper threads and thread
sealants
70 and 80 Series electric actuators
provide 90° and 180° actuation for
our B, MB, HB, SWB series ball
valves.
True two piece design reduces body
leakage paths
Complies with ANSI/ASME B16.34
requirements where applicable
PEEK
PTFE
End Connection
Size Range
Pipe Fittings
Min Max Catalog
1/16 in
3mm
3/4 in
12mm 4121-MB
1/16 in
3mm
3/4 in
12mm
4121-B
1/4 in
n/a mm
1 in
n/a mm 4125-SWB
1/4 in
6mm
1/2 in
12mm 4121-HB
1/8 in
n/a mm
1 in
n/a mm
4234
1/8 in
3mm
1/2 in
12mm 4126-PR
1/8 in
6mm
1 in
25mm 4190-HBV
7

8
Enclosures
Valves
Check Valves
Analytical Systems
Pneumatic
Ball Valves Compression Fittings
Parker check valves are designed for uni-directional fl ow control
of fl uids and gases in industries such as chemical processing, oil
and gas production and transmission, pharmaceutical, pulp and
paper, power and utilities.
C Series (Catalog 4130-C)
Resilient, custom molded,
seat design
Back stopped poppet to minimize
spring stress
CO Series (Catalog 4130-CO)
Suitable for applications requiring
high integrity leak rates and
re-sealing capabilities
Seal integrity to 4 x 10-9 std.
atm-cc/sec
Back stopped poppet to minimize
spring stress
CB Series (Catalog 4130-CB)
Reduces maintenance while
improving performance requirements
on dual fuel turbines
Cracking Pressures: 1, 5, 10, 25,
50, 75, 100 and 120 psi (.023, .069,
.345, .69, 1.72, 3.45, 5.17, 6.9,
8.27 bar)
MPC Series (Catalog 4234)
Variety of elastomeric poppet seals
5 psi (.345 bar) cracking pressure
Cracking Pressures: 1⁄3, 1, 5, 10, 25,
50, 75 and 100 psi (.023, .069, .345,
.69, 1.72, 3.45, 5.17, 6.9 bar)
Port connections include male
and female NPT, CPI , A-LOK ® ,
UltraSeal , VacuSeal , BSP,
SAE and Seal-Lok ®
Cracking Pressures: 1⁄3, 1, 5, 10, 25,
50, 75 and 100 psi (.023, .069, .345,
.69, 1.72, 3.45, 5.17, 6.9 bar)
Available with highly fl uorinated
fl u o r o c a r b o n r u b b e r
Only check valve with published
helium leak rate
Rugged ball design for demanding
applications
For high temperatures with highly
viscous media
MPI , cone & thread and female NPT
connections available
For pressures up to 20,000 psi
(1379 bar)

Valves
Pressure Regulators
Valve
Groups
Check
Valves
Model
Series
C
CO
CB
MPC
MPCB
LC
Maximum
Operating
Pressure
6000 psi
414 bar
6000 psi
414 bar
3000 psi
207 bar
20000 psi
1379 bar
20000 psi
1379 bar
6000 psi
414 bar
Temperature Cv
MPCB Series (Catalog 4234)
Metal to metal seat for use in
applications that cannot accept
fl u o r o c a r b o n r u b b e r
5 psi (.345 bar) cracking pressure
LC Series (Bulletin 4130-LC)
For extreme temperature
applications
Cracking
Pressure
Quick Couplings
Body
Material Seal Material End Connections
Stainless Steel
Parkerfi ll/
Parkercarbon
Buna-N Rubber
Ethylene Propylene
Rubber
Highly Fluorinated
Fluorocarbon
Brass
Min Max Max Max
-65 F
-54 C
400 F
204 C
6.70
100 psi
6.9 bar
x x x x x x x x
-15 F
-26 C
400 F
204 C
2.70
100 psi
6.9 bar
x x x x x
-65 F
-54 C
450 F
232 C
6.00
120 psi
8.27 bar
x x
-10 F
-23C
400 F
204 C
5 psi
.345 bar
x x x x x
-100 F
-73 C
600 F
316 C
5 psi
.345 bar
x x
-100 F
-73 C
900 F
482 C
2.30 x x
Fluorocarbon Rubber
MPI , cone & thread and female
NPT connections available
For pressures up to 20,000 psi
(1379 bar)
The gravity assisted poppet uses
reverse fl ow to achieve a seal to
within 99.9% of forward fl ow
Neoprene Rubber
Metal
PTFE
Min Max
1/8 in 1 in
3 mm 25 mm
1/4 in 1/2 in
6mm 12mm
3/8 in 3/4 in
1/4 in 1 in
1/4 in 1 in
1/8 in 1/2 in
Pipe Fittings
Catalog
4130-C
4130-CO
4130-CB
4234
4234
4130-LC
9

10
Enclosures
Valves
Filters
Valve
Groups
Filters
Model
Series
Product
Description
F Inline Filter
FT Tee Filter
MPF
Medium
Pressure Filter
Analytical Systems
Pneumatic
Ball Valves Compression Fittings
Maximum
Operating
Pressure
6000 psi
414 bar
6000 psi
414 bar
20000 psi
1379 bar
Temperature Cv
For protection of instrumentation systems from undesirable
materials such as dirt, chips, scale and other foreign particles.
Options include Oxygen and special cleaning, bypass and integral
compression ported bypass.
F Series (Catalog 4130-F)
Replaceable sintered 316 stainless
steel fi lter element
FT Series (Catalog 4130-FT)
Filter elements are easily replaced
without disconnecting the tube lines
Fast Loop bypass option enables a
continuous self cleaning fl ow
MPF Series (Catalog 4234)
High pressure applications up to
20,000 psi (1379 bar)
Sintered 316 stainless steel fi lter disc
Body Material Seal Material
Stainless Steel
Fluorocarbon
Rubber
Buna-N Rubber
Ethylene
Propylene Rubber
Highly Fluorinated
Fluorocarbon
Optional 250 and 450 micron wire
cloth fi lter elements
Replaceable sintered 316 stainless
steel fi lter element
Optional 250 and 450 micron wire
cloth fi lter elements
Inline fi lters help protect valuable
equipment in the process system
MPI , cone & thread and female NPT
connections available
Neoprene Rubber
PTFE
Silver Plated
Nickel Alloy
End
Connections
Brass
Min Max
Micron
Max Range
Min Max Catalog
-65 F
-54 C
400 F
204 C
3.40 .5 to 500 x x x x x x x
1/8 in
3mm
1 in
25mm
4130-F
-100 F
-73 C
900 F
482 C
2.50 .5 to 500 x x x x x x x x x
1/8 in
6mm
1/2 in
12mm
4130-FT
-10 F
-23C
400 F
204 C
0.59 .5 to 100 x x 1/4 in 9/16 in 4234

Valves
Pressure Regulators
Relief Valves
Valve
Groups
Relief
Valves
Model
Series
RL
RH
MPRA
Maximum
Operating
Pressure
400 psi
28 bar
6000 psi
414 bar
20999 psi
1448 bar
Temperature Cv
RL4 Series (Catalog 4131-RL)
Handle for fi eld maintenance
Externally adjustable pressure
settings while valve is in operation
Seven different springs
RH4 Series (Catalog 4131-RH)
Eight springs
Manual override option with positive
stem retraction is available for
pressures up to 1500 psi (103 bar)
Quick Couplings
Body
Material Seal Material End Connections
Buna-N Rubber
Ethylene
Propylene Rubber
Highly Fluorinated
Fluorocarbon
Fluorocarbon
Rubber
Steel
Stainless
Min Max Max
-70 F
-57C
400 F
204 C
0.8 x x x x x x
-70 F
-57C
400 F
204 C
0.4 x x x x x x
-10 F
-23C
400 F
204 C
0.7 x x x x x
Manual override option with positive
stem retraction is available for the
full working pressure range
Color coded springs and labels
indicate spring cracking range
Preset from factory and comes with
standard springs
Neoprene Rubber
Min Max
1/4 in 1/4 in
6mm 8mm
1/4 in 1/4 in
6mm 8mm
1/2 in 9/16 in
n/a n/a
Pipe Fittings
Catalog
4131-RL
4131-RH
4234
11

12
Enclosures
Valves
Valve Groups
Bleed and
Purge Valves
Model
Series
BV
PG
MPBV
Analytical Systems
Pneumatic
Ball Valves Compression Fittings
Bleed and Purge Valves
Maximum
Operating
Pressure
10000 psi
690 bar
4000 psi
276 bar
30000 psi
2068 bar
BV Series (Catalog 4133-BP)
Recommended for use in bleeding
hydraulic systems
Valve vents line pressure to
atmosphere or to containment
PG Series (Catalog 4133-BP)
Vent hole in the cap bleeds, drains
or purges system pressure
Optional PTFE ball requires only
fi nger-tight torque to achieve a
leak-tight seal
Multi-valve manifolds or
gauge/root valves
Crimped cap ensures safe relief of
system pressures
Temperature Cv Body Material
Stainless
End Connections
Min Max 0.1 Brass Steel Alloy Min Max Catalog
-65 F
-54 C
850 F
454 C
x x x 1/4" 1/2" 4131-BP
-65 F
-54 C
400 F
204 C
x x x 1/8" 1/2" 4131-BP
-10 F
-23C
400 F
204 C
x 9/16" 9/16" 4234

Valves
Pressure Regulators
Metering Valves
Valve Groups
Metering
Valves
Model
Series
NS
NM
NL
HR
Maximum
Operating
Pressure
2000 psi
138 bar
1000 psi
69 bar
1000 psi
69 bar
250 psi
17 bar
N Series (Catalog 4170-N)
Panel or in-line mounting
Angle or in-line patterns
HR Series (Catalog 4170-HR)
Bubble tight shut-off capability
High resolution metering valve with
limited hysteresis
Temperature Cv Body Material Seat Material End Connections
Stainless Steel
Buna-N Rubber
Ethylene Propylene
Rubber
Highly Fluorinated
Fluorocarbon
Brass
Min Max Max
-50 F
-46 C
400 F
204 C
0.040 x x x x x x x
-50 F
-46 C
400 F
204 C
0.100 x x x x x x x
-50 F
-46 C
400 F
204 C
0.200 x x x x x x x
-50 F
-46 C
400 F
204 C
0.100 x x x x x x x
Fluorocarbon Rubber
Neoprene Rubber
Quick Couplings
Valve stem threads not in contact
with process fl uid
Seven optional valve stem tapers
Min Max
1/16 in 1/4 in
3mm 6mm
1/8 in 1/4 in
3mm 6mm
1/8 in
6mm
3/8 in
1/16 in 1/4 in
3mm 6mm
Pipe Fittings
Catalog
4170-N
4170-N
4170-N
4170-HR
13

14
Enclosures
Valves
Needle Valves
Analytical Systems
Pneumatic
Ball Valves Compression Fittings
V Series (Catalog 4110- V)
For positive leak tight shut-off and
regulation of fl uids
Choice of three stem types
SN6 Series (Catalog 4110-SN)
Provides shut-off and coarse
regulation of liquids and gases
Choice of two stem types
VQ Series (Catalog 4110-VQ)
In-line and angle patterns
Panel mountable
NP6 Series (Catalog 4110-NP)
Choice of two non-rotating
stem types
Packing below power threads
PV Series (Catalog 4110-PV)
Roddable, straight through fl ow path
Gauge port option
U Series (Catalog 4110-U)
Stem packing below the threads
isolates the thread lubricant from
the fl ow
Severe service applications
Wide variety of size and end
connections
In-line and angle patterns
Ideal cylinder valve
Color-coded handles
Quick actuation for low pressure
applications
Panel mountable
Fracture resistant nylon handle
Bonnet lock plate resists accidental
bonnet disengagement
PEEK , Acetal, PFA seat materials
available
Panel mountable
Ideal for steam blowdown

Valves
Pressure Regulators
Valve Groups
Needle
Valves
Model
Series
V
SN6
VQ
NP6
PV
U
MPN
MPGV
HNV
HRPV
HGV
HVG
HYNV
Maximum
Operating
Pressure
6000 psi
414 bar
6000 psi
414 bar
300 psi
21 bar
6000 psi
414 bar
6000 psi
414 bar
6000 psi
414 bar
20000 psi
1379 bar
30000 psi
2068 bar
10000 psi
690 bar
10000 psi
690 bar
10000 psi
690 bar
6000 psi
414 bar
10000 psi
690 bar
Temperature Cv
HNV Series (Catalog 4190-HV)
Compact needle valves
For applications up to 10,000 psi
(690 bar)
RPV Series (Catalog 4190-HV)
For fl uids containing high levels of
contamination frequently found in
oil and gas processing facilities
Straight through fl ow pattern,
roddable design
HGV Series (Catalog 4190-HV)
Up to 10,000 psig (690 barg)
Compact single and multi port
gauge valves
Quick Couplings
Body
Material Actuation Seat/Seal Material End Connections
Alloy
Manual
Pneumatic
PTFE
Buna-N Rubber
Ethylene Propylene
Rubber
Highly Fluorinated
Fluorocarbon
Fluorocarbon
Rubber
Steel
Stainless
Min Max Max
-65 F
-54 C
450 F
232 C
1.30 x x x x x x x
-65 F
-54 C
450 F
232 C
0.30 x x x x
-20 F
-29 C
200 F
93 C
0.80 x x x x x x x x
-70 F
-57 C
700 F
371 C
0.60 x x x x x x x x
-20 F
-29 C
400 F
204 C
2.00 x x x x x x x
-65 F
-54 C
1200 F
649 C
2.70 x x x x
-65 F
-54 C
800 F
427 C
x x x x x
-10 F
-23C
400 F
204 C
x x x x x x
-65 F
-54 C
1000 F
538 C
0.35 x x x x x
-65 F
-54 C
1000 F
538 C
1.80 x x x x x
-65 F
-54 C
1000 F
538 C
0.35 x x x x x
-65 F
-54 C
1000 F
538 C
0.35 x x x x x
-65 F
-54 C
1000 F
538 C
0.35 x x x
Available with integral A-LOK ® or
CPI connections, reducing leak
paths and reducing installation costs
Soft tipped optional seating available
for gaseous applications
100% repeatable bubble tight
shut off
Soft tipped optional seating available
for gaseous applications
Silicon Rubber
GRAFOIL ®
Min Max
1/8 in 3/4 in
3mm 12
1/4 in 1/4 in
1/8 in 1/2 in
3mm 10mm
1/4 in 3/8 in
6mm 8mm
1/4 in 3/4 in
1/8 in 1 in
6mm 25mm
1/4 in 1 in
9/16 in 9/16 in
1/4 in
6mm
1/4 in
6mm
1/4 in
6mm
1/4 in
6mm
1/4 in
6mm
1/2 in
12mm
1/2 in
12mm
1/2 in
12mm
1/2 in
12mm
1/2 in
12mm
Pipe Fittings
Catalog
4110-V
4110-SN
4110-VQ
4110-NP
4110-PV
4110-U
4234
4234
4190-HV
4190-HV
4190-HV
4190-HV
4190-HV
15

16
Enclosures
Valves
Manifold Valves
Analytical Systems
Pneumatic
Ball Valves Compression Fittings
CCIMS ® (Catalog 4190-CCIMS)
Close coupled solution for fl ow
measurement applications
Reductions in installation time of
up to 75%
Monofl ange (Catalog 4190-FP)
Compact double block and bleed
valves, featuring needle valves
Reducing installations cost while
improving safety through a reduction
in leak paths
Pro-Bloc ® (Catalog 4190-FP)
Compact double block and bleed
valves, featuring needle or ball
valve options
Reducing installations cost while
improving safety through a reduction
in leak paths
Confi gurable options include single
block, double block and double block
and bleed
Reductions in connections and leak
paths of up to 85%
Features phastfi t ® for rapid
transmitter removal and connection
Confi gurable options include single
block, double block and double block
and bleed
Available in a range of materials
including carbon steel, stainless
steel, duplex, alloy 625
Available in a range of materials
including carbon steel, stainless
steel, duplex, alloy 625

Valves
Pressure Regulators
Valve
Groups
Manifolds
Model
Series
MF
PB
H2
H3
H5
HBM
Product
Description
double block
and bleed
double block
and bleed
2 valve manifolds
- needle style
3 valve manifolds
- needle style
5 valve manifolds
- needle style
2 & 3 valve
manifolds ball
style
Maximum
Operating
Pressure
ANSI 2500
API 10,000
ANSI 2500
API 10,000
10,000 psi
689 bar
10,000 psi
689 bar
10,000 psi
689 bar
6000 psi
414 bar
Temperature
Body Material Packing Seat/Tip End Connection Size Range
Stainless Steel
Alloy
Steel
Carbon
Min Max Cv
-65 F
-54 C
1000 F
538 C
x x x x x x x x
-65 F
-54 C
450 F
232 C
x x x x x x x
-65 F
-54 C
1000 F
538 C
0.35 x x x x x x x
-65 F
-54 C
1000 F
538 C
1.80 x x x x x x x
-65 F
-54 C
1000 F
538 C
0.35 x x x x x x x
-65 F
-54 C
450 F
232 C
H-Series (Catalog 4190-PM/4190-FM)
A comprehensive range of 2, 3 and 5
valve manifolds for fl ow applications
Available with integral PTFree ®
connections, reducing leakpaths and
installation cost
Hi-Pro Series (Catalog 4190-HBM)
A complete range of ball valves
10mm ball and needle valve
manifolds
Including block and bleed, and
double block and bleed manifold
options
GRAFOIL ®
PTFE
316SS
PEEK
PCTFE
PTFE
x x x x x x
Quick Couplings
Available in stainless steel and many
exotic alloys, including Hastalloy,
6Mo, MONEL ® , and alloy 625
Working pressures up to 10,000 psi
(690 bar)
Available with integral A-LOK ® or
CPI connections, reducing leak
paths and installation costs
Min Max
1/4 in 1/2 in
6mm 12mm
1/4 in
1 in
6mm 25mm
1/4 in 1/2 in
6mm 12mm
1/4 in 1/2 in
6mm 12mm
1/4 in 1/2 in
6mm 12mm
1/4 in
6mm
1/2 in
12mm
Pipe Fittings
Catalog
4190-FP
4190-FP
4190-PM
4190-FM
4190-FM
4190-HBM
17

18
Enclosures
Valves
Diaphragm Valves
Analytical Systems
Pneumatic
Ball Valves Compression Fittings
NOVA Series (Catalog 4515)
General purpose, high cycle,
compact valve
For regulator outlet valve, gas
control panels and analyzer sampling
system applications
NOVAAOP (Catalog 4515)
General purpose, high cycle,
compact valve
For gas control panels and analyzer
sampling system applications
NV55 (Catalog 4515)
General purpose, high fl ow
compact valve
For fl owing large volumes of
corrosive and non-corrosive fl uids
www.parker.com/veriflo
Handwheel, lever, and indicating
handwheel options
Normally open and normally closed
Various actuation pressures available

Valves
Pressure Regulators
Valve Groups Model Series
Product
Description
NOVA Series
Diaphragm
Springless
NOVAAOP
Diaphragm
Springless
Diaphragm
Valves
NV55
Diaphragm
Springless
944AOPHPNCSP
Diaphragm
Springless
16 Series Diaphragm Spring
Maximum
Operating
Pressure
250 psig
17 barg
125 psig
9 barg
250 psig
17 barg
3500 psig
241 barg
3000 psig
207 barg
Quick Couplings
944AOPHPNCSP (Catalog 4515)
High pressure air operated valve Opening function incorporates
Reliable, accurate performance hydraulics
16 Series (Catalog 4515)
High pressure valve for gas
manifold/box systems
316L SST machined body design
Metal-to-metal diaphragm seal
Packless valve design
Temperature Cv Body Material Actuation
Stainless
Steel
Brass
Min Max 0.1 0.3 0.6 Catalog
-15 F
-26 C
150 F
66 C
x x x x x 4515
-15 F
-26 C
150 F
66 C
x x x x x 4515
-15 F
-26 C
150 F
66 C
x x x x 4515
-40 F
-40 C
150 F
66 C
x x x 4515
Alloy
Manual
Pneumatic
x x x x 4515
Pipe Fittings
19

20
Enclosures
Analytical Systems
Pneumatic
Ball Valves
Regulators
Compression Fittings
Pressure Regulators
NPR4100 (Catalog 4511)
Negative pressure regulation
Internally threadless design
Convoluted Hastelloy C-22 ®
diaphragm
IR4000 Series (Catalog 4511)
Internally threadless design
Convoluted Hastelloy C-22 ®
diaphragm
Integral diaphragm stops prevent
oil canning
IR5000 Series (Catalog 4511)
Internally threadless design
Large convoluted Hastelloy
C-22 ® diaphragm
HFR900 (Catalog 4511)
High fl ow regulator
Self-contained replaceable
valve seat
www.parker.com/veriflo
For delivery of low pressure gases
from liquid sources
White knob indicates negative
pressure
Seals available for nitrous oxide and
hydrocarbon applications
Low dead volume
General purpose for instrument/
analyzer and semiconductor
applications
Greater sensitivity for precise
pressure control
For analyzer system gas
management and instrument
calibration
For corrosive and noncorrosive
fl u i d a p p l i c a t i o n s

Valves
Pressure Regulators
Regulator
Groups
Single
Stage
IR6000 Series (Catalog 4511)
Dual stage regulator
Internally threadless design
Convoluted Hastelloy C-22 ®
diaphragm
APR66 (Catalog 4511)
High pressure piston sensing
regulator
Low actuating torque
Quantum 959 (Catalog 4511)
Tied diaphragm design to minimize
regulator creep
Internally threadless design
DM3000 (Catalog 4518)
Miniature pressure regulator for
gas instrumentation applications
ANSI/ISA SP76.00.02 modular
surface mount interface
Quick Couplings
Virtually eliminates supply
pressure effect
Provides cylinder gas pressure
reduction in refi neries, process
analytical systems and specialty
gases
Pressures up to 6000 psig
(413.7 barg)
Metal to metal diaphragm seal
No threads in wetted area
Critically dampened to improve
fl ow stability
Faster purge times
Pressure Cv Body Material Connections
Model
Maximum Maximum Outlet
Hastelloy
Series Type Inlet Pressure Pressure Min Max 316L SS Brass C-22 Catalog
® MONEL ®
Min Max
Face Seal
FNPT FNPT Compression or Tube
NPR4100
Absolute
Pressure
250 psig
17 barg
-26 in Hg to 10 psig
-1.8 in Hg to .7 barg
0.02 0.15 x x x x 1/8" 3/8" x 4511
IR4000
General
Purpose
4000 psig
276 barg
500 psig
34 barg
0.02 0.15 x x x x 1/8" 3/8" x 4511
IR5000 Sensitive
3500 psig
241 barg
250 psig
17 barg
0.02 0.15 x x 1/8" 1/2" x 4511
HFR900 High Flow
500 psig
34 barg
150 psig
10 barg
0.85 0.85 x x 1/4" 1/2" x 4511
APR66
High
Pressure
6000 psig
414 barg
6000 psig
414 barg
0.04 0.04 x x 1/8" 1/4" 4511
Quantum
959
Tied
Diaphragm
3500 psig
241 barg
150 psig
10 barg
0.04 0.20 x x 1/4" 1/4" x 4511
DM3000
Surface
Mount
x 4518
Pipe Fittings
21

22
Enclosures
Analytical Systems
Pneumatic
Ball Valves
Regulators
Compression Fittings
Back Pressure Regulators
Regulator
Groups Model Series Type
Back
Pressure
ABP1 General Purpose
ABP3 Sensitive
BPR50 High Pressure
Pressure Cv Body Material Connections
Maximum Inlet
Pressure Min Max 316L SS
Up to 500 psig
34 barg
Up to 60 psig
4 barg
Up to 2500 psig
172 barg
ABP1 (Catalog 4510)
Reduce contamination and accurately
control back pressure
Internally threadless design
ABP3 (Catalog 4510)
Internally threadless design
Provides sensitive pressure
adjustments
BPR50 (Catalog 4510)
For use with corrosive and
non-corrosive fl uids
Adjustable from 100 psi (6.7 bar)
to 2000 psi (138 bar)
Hastelloy
C-22 ® Monel ®
www.parker.com/veriflo
Convoluted Hastelloy C-22 ®
diaphragm
Integral diaphragm stop
Large convoluted Hastelloy
C-22 ® diaphragm
Integral diaphragm stop
Piston sensed high pressure back
pressure regulator
Min
FNPT
Max
FNPT
Catalog
0.06 0.30 X X X 1/8" 1/4" 4510
0.06 0.30 X X 1/8" 1/4" 4510
0.45 0.45 X 1/4" 1/4" 4510

Valves
Pressure Regulators
Vaporizing Regulators
Regulator
Groups Model Series Type
Vaporizing
Regulators
AVR3 Steam Heated
AVR4
Electrically
Heated
Maximum Inlet
Pressure
4000 psig
276 barg
4000 psig
276 barg
AVR3 (Catalog 4512)
Steam heat design
Field serviceable heat
transfer element
AVR4 (Catalog 4512)
Electrical heat design
Field serviceable heat
transfer element
CSA, Cenelec, and ATEX certifi ed
Quick Couplings
Internally threadless design
Internal liquid volume only .5cc
Convoluted Hastelloy C-22 ®
diaphragm
Internally threadless design
120v or 240v, 50/60 Hz
Convoluted Hastelloy C-22 ®
diaphragm
Pressure Cv Body Material Connections
Maximum Outlet
Pressure Min Max 316L SS MONEL ®
500 psig
34 barg
500 psig
34 barg
www.parker.com/veriflo
Min
FNPT
Max
FNPT
Pipe Fittings
Catalog
0.06 0.06 X X 1/8" 1/8" 4512
0.06 0.06 X X 1/8" 1/8" 4512
23

24
Enclosures
Analytical Systems
Pneumatic
Ball Valves
Flow Controllers Compression Fittings
www.parker.com/porterinstrument
Porter Instrument specializes in the design and manufacture of
precision instruments for the measurement and control of low fl ow
gases and liquids.
Gas Mass Flow Controllers (Catalog FM-441)
Responds to a step change in
setpoint in less than one second
Actual fl ow is stabilized within 2
seconds, virtually without overshoot
Models available with fl ow ranges of
0-5 sccm to 0-1000 slpm N 2
High pressure models have operating
pressures to 3000 psig (207 barg)
Digital Liquid Mass Flow Controllers (Bulletin FM-998)
Thermal measurement system
yields accurate measurement
with less than a 5°C increase in
fl u i d t e m p e r a t u r e
Flowmeters (Catalog FM-1058)
Variable area fl owmeters include
65mm and 150mm scale length
tube assemblies
Available in either forged body or
side-plate construction
Exclusive control circuitry, combined
with a piezoelectric-actuated control
valve, provides fast, stable control at
low fl ow rates
Interchangeable fl ow tube assemblies
and valves allow confi guration
changes without removal from
process system
Instrument Pressure Regulators (Catalog FM- 1057)
All models are direct acting,
non-relieving and are cleaned for
analytical instrument service
Designed specifi cally to provide high
resolution control at the low fl ow
rates typical in instrumentation
applications
Available with special port locations,
manifold mount confi gurations, or
with the regulator integrated into a
larger, multi-functional package

Valves
Pressure Regulators
PFA/PTFE Products
Fluoropolymer
Components
www.parker.com/partek (Catalog PSM Partek)
Durable, leak free Partek products are used in a
variety of industries, including semiconductor manufacturing,
chemical/food/pharmaceutical/biomedical
processing, as well as analytical instrumentation.
Partek fl uoropolymer products are recommended
for applications that encounter pressures below
120 psig (8.27 barg), and corrosive media at
temperatures up to 400°F (204°C). Fluoropolymer
valves and fi ttings offer corrosion protection and are
used to ensure media/system purity. The wetted
surfaces of all products are of chemically inert
corrosion resistant PFA or PTFE. Partek products
are available from 1⁄8" up to 1" in size.
Quick Couplings
Parfl are PFA Tube Fittings: Parfl are fi ttings provide
low dead volume, which decreases the possibility of
particle entrapment and bacterial growth.
Pargrip PFA Tube Fittings: Perfect for applications
where ease of assembly is a requirement. Grooved
tubing is not required.
Parbond PFA Fusible Pipe Fittings: Parbond
fi ttings welded design eliminates threaded connections
and entrapment areas and creates a leak free connection.
PFA Pipe Fittings: Available in a variety of confi gurations,
all with standard NPT threads.
PFA Valves, Gauge Protectors, Thermocouple
Fittings and Spray Guns: High cycle life, all
fl uoropolymer construction, with application tested and
proven designs.
PTFE Valves, Regulators, and Flowmeters:
Wetted areas are manufactured from fl uoropolymer
material which offers unmatched corrosion protection
and high cycle life.
Pipe Fittings
25

26
Enclosures
Analytical Systems
Pneumatic
Ball Valves
Analytical Systems Compression Fittings
Our chemical/petrochemical process analytical systems provide
a sound model for both North American and European markets,
adapting with minor modifi cations to environmental segments, as
well as laboratory and pilot plant markets. They also serve as a
basis for power and pharmaceutical analytical segments. No other
single supplier can offer a more complete, advanced, or adaptable
sample analysis system.
Vent Recovery Panel (Bulletin 4141-VR)
Pre-engineered compact instrument
panel that includes fi ttings, valves,
stream switching valve, regulators,
and gauges
System adjusts for variations in gas
supply pressures and fl ows
Vent Master (Catalog 4142-VM)
Pre-engineered compact instrument
panel that includes regulators,
gauges, rotometer, an eductor and
a separate pressure controller
Creates a stable pressure within the
analyzer shelter vent header system
Provide analysis accuracy with .06%
over a vent header fl ow of 0-18SLPM

Valves
Pressure Regulators
IntraFlow (Catalog 4250)
Modular instrument system
ISA/ANSI SP 76.00.02 compliant
Every component is upgradeable to
Gen 2 & 3 NeSSI Technologies
R-max (Catalog 4140-R)
Surface mount technology for
stream switching valves
Low internal volume to reduce
system purge time
ChangeOver System (Catalog 4511)
Compact turnkey module designed
for continuous gas management
Optional outlet regulator to control
application specifi c outlet pressure
Aluminum panel is standard
Quick Couplings
Vacuum to 500 psig (34 barg)
System design software available
Low pressure actuation of
valves-40 psig (-2.76)
Rated from vacuum to
500 psig (34 barg)
Audio/visual alarm annunciator
available
Available in 316L stainless steel
and brass
Suitable for oxygen service
Pipe Fittings
27

28
Enclosures
Analytical Systems
Pneumatic
Ball Valves
Hose/Tubing/Quick Couplings
Compression Fittings
Push-Lok ® Hose (Bulletin 4281-B1-US)
Unique seal ensures reliability and
durability for clean-environment use
No clamps or special tools required
for installation
Quick Couplings (Catalog 4220)
Spill-free designs virtually eliminate
fl uid loss upon disconnection and
minimize air inclusion during
connection
Minimize air inclusion during
connection
Inner liner is an extruded, synthetic
rubber, resistant to petroleum-base
oil, air and water
Double shut-off fl ush mating valves
suitable for seal off media in
corrosive applications
Working pressures from
300 psi (21 bar) to
5,000 psi (3445 bar)
Stainless Steel Metal Hose (Catalog 4690-MH)
For extreme conditions where other
hoses fail
For temperatures up to 1,500°F
(816°C)
Frequently used for the conveyance
of liquid nitrogen
Provides the lowest permeation rate
of any hose available
Multitube ® Instrument and Heat Trace Tubing
(Catalog 4200-M-1)
Available in a variety of
confi gurations
For containment, transmission and
control of pneumatic signals, gases
and liquids
Materials include copper, stainless
steel, metal alloys and PFA/PTFE

Valves
Pressure Regulators
Tools and Accessories
Tube Fabrication Equipment (Catalog 4290)
High quality hand benders, tube
cutters, deburr tools and preset tools
Tube benders from 1 ⁄8" to 1" size
Tube cutter rated for 316 stainless
steel tubing
Sample Cylinders (Catalog 4160-SC)
1800 psig (124 barg) DOT rated
sample cylinders
Stainless steel construction
Quick Couplings
Par-Lok ® wrenches with 360°
snap-action for fl exibility
Preset installation kits for assembling
tube fi ttings in close spaces
ANSI/ASME B1.20.1 internal pipe
threads
Brass Push-to-Connect Fittings (Bulletin 3531-QRG/USA)
Prestolok ® brass and Prestolok II ®
composite push-to-connect fi ttings
are designed for use with nylon,
polyethylene, polyurethane and
soft metal tubing
Ideal for pneumatic
applications
Equipped with stainless steel grab
rings eliminating need for tube
supports
No tools required for
installation
Designed for side-loading
Pipe Fittings
29

30
Enclosures
Analytical Systems
Pneumatic
Ball Valves Compression Fittings
Sanitary and BioPharmaceutical
Parker Performance Stainless is a complete line of sanitary
fi ttings, valves and related fl ow components for use in a variety
of hygienic processing applications. These products meet the
stringent standards required by processors in the food, beverage,
dairy, biopharm and health & beauty industries.
Sanitary Fittings (Catalog 4270)
Buttweld, clamp, bevel seat, I-line,
and other fi tting styles available
Unpolished I.D. and unpolished O.D.
Both I.D. and O.D. are mill or tumble
fi n i s h e d
A full line of adapters for threaded,
fl anged and socket weld connections
also available
Sanitary tubing and tubing hangers
available to complete any project
Valves and Flow Components (Catalog 4270-VFC)
Sanitary versions of sample, ball,
butterfl y and check valves available
A complete line of pneumatic and
electric actuators and control
accessories. Choose from traditional
rack-and pinion style or stainless
steel wash down versions
Valves are precision manufactured
from heat traceable materials and
designed to perform under the most
exacting conditions
Available with a variety of elastomers
and other customer-specifi ed
confi gurations to ensure a perfect
fi t within any processing system

Valves
Pressure Regulators
Product Selection Guide CD Operating Instructions
Parker’s Product Selection Guide CD contains
electronic versions of all catalogs referenced in
the Product Selection Guide document as well as
additional Parker Instrumentation product lines.
To use the CD
Simply place the disc in your CD drive.
An autorun program on the CD will search your
computer for the Adobe ® Acrobat ® Reader ®
program, version 5.0 or higher.
Hastelloy C-22 ® is a registered trademark of Haynes International, Inc.
Hastalloy ® is a registered trademark of Haynes Industries, Inc.
PEEK is a registered trademark of Victrex plc.
MONEL is a trademark of the Special Metals Corporation.
GRAFOIL is a registered trademark of GrafTech International.
Quick Couplings
If Acrobat Reader is found, the opening screen of
the CD will appear. From the opening screen, you
can view this Product Selection Guide, go to specifi c
product categories or choose a specifi c catalog.
If Acrobat Reader is not found, it will be installed on
your hard drive and then the opening screen of the
CD will appear. From the opening screen, you can
view this Product Selection Guide, go to specifi c
product categories or choose a specifi c catalog.
Pipe Fittings
31

Parker Hannifin Corp. Instrumentation Group Divisions
Instrumentation Products Divisions
Connectors Operation
1005 A Cleaner Way
Huntsville, AL 35805
Phone: (256) 885-3800
Fax: (256) 881-5072
www.parker.com/ipdus
Valve Operation
2651 Alabama Highway 21 North
Jacksonville, AL 36265
Phone: (256) 435-2130
Fax: (256) 435-7718
www.parker.com/ipdus
Europe
Riverside Road
Pottington Business Park
Barnstaple, Devon EX31 1NP
Phone: (44) 1271-313131
Fax: (44) 1271-373636
www.parker.com/ipd
Parker Worldwide Product Information
U.S.: 1-800-C-Parker (1-800-272-7537)
Europe: 00-800-C-Parker-H (00800-27-27-5374)
Porter Instrument Division
245 Township Line Road
Hatfi eld, PA 19440
Phone: (215) 723-4000
Fax: (215) 723-2199
www.parker.com/porterinstrument
Veriflo Division
250 Canal Boulevard
Richmond, CA 94804
Phone: (510) 574-9590
Fax: (510) 232-7396
www.parker.com/veriflo
To fi nd your local distributor: www.parker.com
Your local Parker Instrumentation Group authorized distributor:
Verifl o Division Partek Operation
7075 East Southpoint Road
Tucson, AZ 85706
Phone: (520) 574-2600
Fax: (520) 574-2700
www.parker.com/partek
ING Process PSG
25M 02/07 AMD