2020 September Premier, Volume I

Real Art • Real History • Real Iron
Fine, Historic, & Investment Grade Firearms
September 11 th , 12 th & 13 th , 2020
VOLUME I
®

Not All Art is Framed

From the Legendary Robert M. Lee Collection

RIA
ROCK ISLAND AUCTION
COMPANY
PREMIER COLLECTOR'S FIREARMS AUCTION - SEPTEMBER 11 TH , 12 TH & 13 TH , 2020
Featuring:
A Selection of Firearms from the Robert M. Lee Collection
A Selection of Fine & Historic Sporting Arms from the Esteemed Collection of Malcolm King
Fine Arms from the Revered Larry Jones Collection
Dr. Gerald Klaz Collection
Robert Young • Roger Muckerheide • The Gateway Collection • Putnam Green/Sycamore • John Fox • David Terbrueggen
Curt McClymond • The Franklin Institute • Mitchell L. WerBell III • The Corner Stone Collection • William T. Prichard
RIA
ROCK ISLAND AUCTION
COMPANY
Auction Information
VIEWING TIMES
Thursday, September 10th 10 a.m. to 6 p.m.
Friday, September 11th 7:30 a.m. to 9 a.m.
Saturday, September 12th 7:30 a.m. to 9 a.m.
Sunday, September 13th 7:30 a.m. to 9 a.m.
Viewing is also open all day during the auction Friday and
Saturday on items not being sold that particular day.
Note: Early viewing available by appointment.
TO BE SOLD AT AUCTION
SESSION I - Friday, September 11th
TIME: Commencing at 9 a.m. selling between Lots 1 and 638
SESSION II - Saturday, September 12th
TIME: Commencing at 9 a.m. selling between Lots 1000 and 1720
SESSION III - Sunday, September 13th
TIME: Commencing at 9 a.m. selling between Lots 3000 and 3622
Administration and Staff
Patrick F. Hogan CEO
Kevin Hogan President
Judy E. Voss Vice President
Dan Thorngren Vice President of Information Technology
Laurence Thomson Vice President of Catalog Production
Jessica Tanghe Vice President of Acquisitions & Incoming
Gordy Hartman Vice President of Logistics & Building/Warehouse Management
Rick Henley Executive Director of Acquisitions
Leslie Krup Special Projects & Estates Coordinator
Mike Roelens Acquisitons Representative
David Carroll Independent Consultant
FIREARMS SPECIALISTS - DESCRIBERS
Brian Beck
Seth Isaacson
Tom Jackson
Gregory Johnson
Matthew Omerza
Andrew Padavich
Brian Schmidt
Ryan Sullivan
2
HOW TO REACH US
Location and Mailing Address:
7819 42nd Street West, Rock Island, IL 61201
Ph: 309-797-1500 or 800-238-8022
Facsimile: 309-797-1655
Email: info@rockislandauction.com
Website: www.rockislandauction.com
Auctioneer’s License# 044000109
CATALOGS
Domestic $70 • International $85 (inc. S&H)
Subscription (3 catalogs): Domestic $175 • International $220 (inc. S&H)
CATALOG PRODUCTION - GRAPHIC DESIGN - PHOTOGRAPHY
Rich Burkeybile
Jarod Cox
Lance Dillie
Alyssa Eastman
Patrick Irwin
Nathan Kabel
Dave Meumann
Sean Nagle
Matthew Parise
Patrick Quinn
Cale Raisbeck
Brian Smith
Malal Sow
Jason Stout
Ashley Vretis
Valerie Widmeyer

1. TERMS & CONDITIONS OF SALE. The following conditions
of sale make up the entire terms and conditions on which
items listed in Rock Island Auction Company’s (known
hereafter as “RIAC”) catalog, on the internet web site and
addendum sheets will be offered for sale or sold by RIAC.
All bidders who participate by bidding in this auction agree
to the terms and conditions of sale and agree to be bound
by same. Any notices, posted or oral, during the sale, are
also part of our terms and conditions of sale agreement.
Acceptance of a bidder card or a bidder number constitutes
acceptance of the following terms and conditions of sale.
The purchaser’s rights and RIAC’s respective rights and
obligations hereunder are governed by Illinois law. By
bidding at RIAC’s auction, whether in person or by agent,
sealed bid, telephone bid, via the internet or other means,
the purchaser or bidder agrees that the contract created by
these terms and conditions of sale is made and performed
in the County of Rock Island, State of Illinois and further
agrees that should any dispute arise from this contract the
sole and exclusive jurisdiction for contractual disputes is
Rock Island County, State of Illinois. THE AUCTIONEER IS
NOT RESPONSIBLE FOR ANY ERRORS OF THE PURCHASER
INCLUDING BUT NOT LIMITED TO THE PURCHASER BIDDING
ON THE WRONG LOT.
2. BUYER”S PREMIUM. All bid prices “hammer prices”
(“hammer prices” mean the price at which a lot is knocked
down to the purchaser) will be subject to a buyer’s
premium 18.5% payable by the purchaser. The buyer’s
premium shall be reduced to 15% provided the payment
is paid by cash or the equivalent of cash (cashier’s check,
wire transfer, or approved personal check). If the account
is settled by credit card, the buyer’s premium then shall be
the standard 18.5%. This is not an aggregate percentage
on the total items bid, but rather a per item percentage
rate. In addition, if the purchaser utilizes RIAC’s live bidding
platform ‘RIAC Live’, there will be an additional 1% of the
hammer price added to the buyer’s premium. The premium,
which includes the additional 1% if the purchaser utilizes
RIAC’s live bidding platform ‘RIAC Live’, is added to the
purchaser’s successful bid and the two together equal
the total purchase price. RIAC has been authorized by the
consignor to retain as part of RIAC’s remuneration, the
buyer’s premium, which includes the additional 1% of the
hammer price if the purchaser utilizes RIAC’s live bidding
platform ‘RIAC Live’, payable by the purchaser.
3. SALES TAX.
AK, AL, AZ, AR, CA, CO, CT, DC, GA, ID, IN, IA, IL, KY, MD, MA,
MN, NE, NV, NJ, NM, NY, ND, OH, OK, PA, RI, SC, SD, TX, UT,
VT, VA, WA, WV, WI and WY.
RIAC is a Marketplace Facilitator (as defined in the
applicable regulations for each state) for purposes of
collecting and submitting sales tax for each applicable
state. A Marketplace Facilitator is a business that contracts
with sellers to facilitate the sale of tangible goods and
administers all aspects of the transaction. A Marketplace
Facilitator is required to collect sales tax from the buyer
and remit such sales tax to the state to which the items are
shipped. The sale tax is based on the ship to address. If the
item is picked-up from the RIAC facility or shipped to an
Illinois address, Illinois sales tax of 8.5% will be collected.
Generally, all items included on the invoice are taxable.
4. METHOD OF PAYMENT. Auction sales are strictly for cash,
cashier’s check, personal checks (with prior approval of
RIAC’s management), MasterCard, Visa or Discover. NOTE TO
FOREIGN BUYERS: Method of payment will be U.S. currency,
certified check drawn on an American bank or wire transfer.
5. TERMS OF PAYMENT. At the announcement of “SOLD”,
the highest bidder will have purchased the offered lot. All
sales are final at the fall of the Auctioneer’s hammer or at
the announcement of “SOLD”. The purchase is subject to all
the terms and conditions set forth herein. The purchaser
assumes full responsibility thereof and if requested will
sign a confirmation of the purchase. The purchaser further
agrees to pay the Total Amount Due. The Total Amount Due
must be paid in full the day of sale if attending in person,
otherwise upon receipt of the buyer’s invoice. All property
must be removed from RIAC’s premises at the purchaser’s
expense no later than 5:00 p.m. five days following the
date of sale unless otherwise agreed. If the property is not
removed within five days following the date of sale, it will
be stored at RIAC’s facility at a cost of $50 per month. The
purchaser will then be unable to pick up the purchased lots
until the storage fees are paid to RIAC. If the purchased lots
are not picked up and storage fees paid to RIAC, the items
will be sold pursuant to the Illinois Labor and Storage Lien
Act, 770 ILCS 45/0.01 et seq. and/or 770 ILCS 50/0.01 et seq.
Each purchaser at this auction grants RIAC a security
interest in the property purchased. Any of the purchaser’s
property and all monies held or received by RIAC on the
purchaser’s behalf will be retained as collateral security
for the purchaser’s obligations to RIAC. RIAC may apply
against such obligations monies held or received by RIAC
for the account of, or owing to, the purchaser. RIAC retains
all rights of a secured party under the Illinois Commercial
Code. Whenever the purchaser pays only a part of the Total
Amount Owed for one or more lots purchased, RIAC may
apply such payments, at RIAC’s sole discretion, to the lot or
lots RIAC chooses. Payment will not be deemed made in full
until RIAC has collected the Total Amount Due in cash or
good funds. RIAC has the sole discretion to determine what
is considered good funds. In the event Purchaser pays by
check and the check is returned due to insufficient funds,
stopped payment, closed account, or for any other reason,
and Purchaser already has possession of the property,
such possession of the property will be deemed theft by
deception and/or theft under 18 U.S.C. § 922(u), which may
result In penalties of a fine of up to $250,000, imprisonment
in federal prison for up to 10 years, or both. In addition to
remedies available to RIAC and the consignor by law, if the
purchaser does not comply with the terms and conditions
of sale (this includes but is not limited to payment in full
of the Total Amount Due), RIAC, at its option, may either:
(1) cancel the sale and retain as liquidated damages all
payments made by the purchaser; or (2) resell the property
either publically or privately, and in such an event the
purchaser shall be liable for the payment of the deficiency,
plus all costs and expenses of both sales and RIAC’s
commission for both sales at RIAC’s standard rates, as well
as any other damages, including but not limited to loss of
profits. The purchaser hereby waives any and all notices of
disposition of collateral and sale required under the Illinois
Commercial Code. The purchaser is also responsible for all
other charges due hereunder, in addition to any attorney’s
fees incurred by RIAC, incidental damages, and any other
damages incurred by RIAC.
6. INTEREST AND DEFAULT. Payment of the Total Amount
Due is due upon receipt of the buyer’s invoice. If the
amount noted within the buyer’s invoice is not paid in full
within 15 days of the auction, RIAC has the right and will
charge the purchaser’s credit card of record on file for the
total invoice amount. Interest will be charged on all unpaid
balances at the rate of 1-1/2% per month (18% APR), or the
highest allowable rate under Illinois law, whichever is lower,
beginning 15 days after the date of purchase/auction.
The purchaser acknowledges that should the purchaser
not comply with any of the terms and conditions of sale,
including payment of the full amount indicated on the
buyer’s invoice, the damages incurred by RIAC includes,
without limitation, consignor commission, loss of use of
money for an indefinite period, costs to relist the item
and potential depreciation of the item, and loss arising
on the resale of the lot, whether such damages are now
known or may become known in the future. Accordingly,
in the event the purchaser fails to pay the full amount
indicated on the buyer’s invoice within 45 days after the
auction, purchaser shall be immediately liable for liquidated
damages in an amount equal to 30% of the amount on the
buyer’s invoice. These liquidated damages are in addition
to the total amount invoiced on the buyer’s invoice and any
applicable interest. RIAC shall hold any money deposited in
partial payment on account of any liability of the defaulted
item and will apply it at the sole discretion of RIAC to the
outstanding debt.
7. WITHDRAWAL. RIAC reserves the right to withdraw any
property from the auction prior to sale.
8. PROTESTS, DISPUTES AND THE AUCTIONEER. RIAC
reserves the right to reject a bid from any bidder. The
highest bidder, acknowledged by the Auctioneer, will be
the purchaser. The Auctioneer shall have sole and final
discretion as to the disposition of any dispute including the
re-offer and resale of any article in dispute. RIAC’s records
will be deemed conclusive in all respect in the event there
is any dispute after the sale.
9. FAILURE TO DELIVER PURCHASER’S PROPERTY. If RIAC
is prevented by fire, theft, or any other reason from
delivering any property to the purchaser, RIAC’s liability
shall be limited to the sum actually paid therefore by the
purchaser and shall in no event include any incidental or
consequential damages.
10. GUARANTEE. All property offered for sale is as is,
where is. ALL SALES ARE FINAL. THERE WILL BE NO
REFUNDS AND NO EXCHANGES. RIAC does not guarantee
or make warranties on any lot sold. The bold headline
of the description is the only written statement RIAC
will guarantee as correct. Descriptions in the catalog are
opinion. They are written as an aid to potential bidders.
RIAC acknowledges that there may be errors in what
is written beyond the bold headline description. RIAC
recommends that you personally view any item you
bid on or have an acknowledged expert view the item.
Statements starting with the word condition are opinions,
not statements of fact or guarantees. If a dispute about a
lot arises it is the purchaser’s responsibility to provide a
written statement by an acknowledged qualified expert
within 30 days after the auction that the bold headline is in
fact incorrect. The 30 day return period IS NOT calculated
from the date payment is made or the date the items are
received. The 30 day return period will not be extended
due to delay in payment or delay in receipt of the goods.
If the expert’s statement is indeed correct RIAC will make
a full refund upon return of the merchandise, provided
that the merchandise is returned in the same condition it
was received. In the unlikely event that you need to return
the merchandise to RIAC, Purchaser is responsible for all
shipping costs. RIAC must again reiterate the guarantee is
only on the bold headline of the description and RIAC will
only honor this guarantee within 30 days of an auction.
This right to return an item purchased at an auction shall
be expressly limited to situations where errors occurred in
the bold headline description of an auction item and such
30-day return provision shall not apply to a return of an
auction item for any other reason. RIAC will have no further
obligation, i.e., no refunds or returns will be accepted, if
the above conditions are not met. Items offered for sale as
described in the catalog or any bill of sale, advertisement,
addendum sheet, or elsewhere as to authorship, period,
culture, source, origin, measurement, quality, rarity,
provenance, importance, exhibition, or physical condition
are qualified statements of opinion and not representations
or warranties. No employee of RIAC or any person
purporting to act on behalf of RIAC is authorized to make
on RIAC’s or the consignor’s behalf, any representation or
warranty, oral or written, with respect to any lot or item
for sale.
11. BINDING EFFECT, MODIFICATIONS, AND SEVERABILITY.
The terms and conditions of sale shall bind the successors
and assigns of all bidders and purchasers and inure to
the benefit of RIAC’s successors and assigns. No waiver,
amendment or modification of the terms hereof (other than
posted notices or oral announcements during the sale) shall
bind RIAC unless specifically stated in writing and signed
by RIAC. If any part of these terms and conditions of sale is
for any reason invalid or unenforceable, the invalid portion
shall be stricken and the rest of the terms and conditions of
sale shall remain valid and enforceable.
12. RESERVES. Some items in this auction may be subject
to reserve (the confidential minimum price below which
the lot will not be sold). If a lot is offered with a reserve,
RIAC may implement that reserve by bidding on behalf of
the consignor. No reserve will be allowed higher than the
high estimate and in many cases the reserve is lower than
the low estimate. This bidding will not generally constitute
opening bidding. If RIAC declares an opening bid and no
advance to that bid is received RIAC will pass the item.
However, once bidding is opened RIAC will bid on behalf
of the consignor to reach the reserve price. The Auctioneer
may reject nominal bids, which are small opening bids
or very nominal advances made with the purpose of
disparaging an item. If a lot fails to achieve a bid equal to
or exceeding 25 – 30% of the low estimate, the item may
be passed and not sold and may not be re-offered until a
later sale. This determination of whether to sell the item at
the current auction or re-offer it at a later auction is at the
sole discretion of the Auctioneer. RIAC buys items on the
open market or may offer a guarantee to a consignor. In
either event, RIAC can have an ownership or other financial
interest in the item(s) being auctioned. Such interest in the
item(s) being auctioned may not be disclosed. If RIAC has
an interest in an offered lot and the proceeds therefrom,
other than our commission, RIAC may bid on the offered
lot to protect such interest and such bidding shall not be
prohibited under Section 12 below. Items which are not
reserved are sold at the Auctioneer’s discretion.
13. BIDS OF CONSIGNORS. Consignors, other than RIAC,
are not allowed to bid on their own merchandise nor have
any agent bid on their behalf. If the Auctioneer recognizes
such bidding or is advised of same, the Auctioneer reserves
the right to withdraw any or all items consigned by the
Terms and Conditions
3

Terms and Conditions
4
offending consignor. It is not prohibited conduct under
this Section 12 when an Auctioneer bids on behalf of the
consignor to reach the reserve price as provided In Section
11 above.
14. FINANCIAL INTEREST IN PROPERTY. Purchaser
acknowledges that RIAC has a financial interest in all items
offered for sale since it is paid a seller’s commission and
buyer’s premium. Additionally, Purchaser acknowledges
that a conflict of interest may exist because RIAC, its officers
or employees, or an entity owned by one or more of them,
may have a financial interest in an item offered for sale
beyond the seller’s commission and buyer’s premium,
which may include an ownership interest or a guaranteed
amount offered by RIAC to a consignor of an item for sale.
15. ABSENTEE BIDDING. As a service to anyone wishing
to place bids in advance of the sale RIAC may accept bids
on behalf of potential bidders at RIAC’s own discretion by
telephone or sealed bid using the forms RIAC provides.
A Sealed Bid must be received and credit approved in
advance of the sale date. It is the Bidder’s responsibility
to establish credit before bidding, or RIAC will accept a
15% deposit in the amount of the total bids submitted.
(Deposits will be returned within ten (10) days after sale if
not successful.) A Sealed Bid form is enclosed in the back
of the catalog. Bids may also be faxed to (309) 797-1655.
Additionally, on-line bidding is available on RIAC’s website.
Purchasers acknowledge that by bidding absentee via
mail, e-mail, telephone, through internet providers, or
any other absentee means (i.e., not in person bidding),
no fiduciary duty exist between the bidder and RIAC.
Purchaser acknowledges that RIAC has a fiduciary duty to
the sellers and not to the bidders or purchasers. Purchaser
acknowledges that RIAC owes no duty to disclose the
ownership of any item being auctioned. Any absentee bid is
executed as if the bidder was actually present and bidding
themselves. RIAC will attempt to execute bids in a manner
such that the bids will prevail at the lowest bid possible.
RIAC assumes no responsibility for failure to execute
telephone, sealed, or website/online bids for any reason
whatsoever or for failure to execute bids such that the bids
do not prevail at the lowest bid possible.
16. TELEPHONE BIDDING. In order to bid on a lot over the
telephone at the time it is being sold the bidder must
contact RIAC in advance to make arrangements. The bidder
must contact RIAC by 2:00 p.m. the day preceding the
sale to make arrangements to bid via telephone. If the
bidder contacts RIAC after 2:00 p.m. the day preceding the
sale, RIAC cannot guarantee that the bidder’s bids will be
executed. A representative of RIAC will contact the bidder
on the day of the sale, prior to the requested lot(s) going up
for sale. Telephone Bids may be faxed to (309) 797-1655 or
they can be submitted through our online service.
BY PARTICIPATING IN TELEPHONE BIDDING, THE BIDDER
AND PURCHASER UNDERSTAND, ACKNOWLEDGE AND
CONSENT TO THE TELEPHONE CONVERSATION BEING
RECORDED.
“Cover-Me Bids”: As a Telephone Bidder be aware that
there is the risk of RIAC not being able to reach the
Telephone Bidder. Therefore the Telephone Bidder may
want to consider allowing his or her phone representative
to execute bidding on his or her behalf. At the time of
arranging for the phone bids, the Telephone Bidder
need simply give the maximum amounts he or she is
willing to bid on each lot in the event RIAC is unable to
reach the Telephone Bidder. This amount is only utilized
if the Telephone Bidder is not on the phone with his or
her representative. If the Telephone Bidder is reached
via telephone, the phone representative will rely on the
Telephone Bidder’s verbal instructions only. “Cover-me bids”
are not mandatory; the Telephone Bidder can place them
at his or her discretion. “Cover me bids” are simply a safety
net in case the Telephone Bidder cannot be reached in time
or not at all. All terms provided under Section 13 above
apply to any “Cover-Me Bids”, including but not limited to all
acknowledgements made by Purchaser and any disclosure
of the absence of any duties by RIAC.
Online bidding is available through third party providers.
Potential bidders are informed that those third party
services charge an additional buyers premium above and
beyond the premium charged by RIAC.
17. FIREARMS LAWS. All post – 1898 firearms must be
registered in compliance with federal and Illinois state law.
Purchasers of post – 1898 firearms must complete state
and federal registrations forms at Rock Island Auction
Company, 7819 42nd Street West, Rock Island, IL 61201,
unless otherwise specified. A 3-day waiting period is
mandatory for modern handguns and modern long arms.
Dealers and out-of-state purchasers must have in their
possession on the day of sale, signed copies of their Federal
Firearms License (FFL) in order to accept same-day delivery
of modern weapons. Purchasers who act as agents for FFL
dealers must have a letter of agency as well as a signed
copy of the dealer’s FFL.
18. CLASS 3. All firearms designated as Class 3 must be
registered in compliance with the NFA registry. Upon
purchase, all interstate transfers are done from RIAC to a
Class 3 dealer, one with a FFL/SOT License, in your area.
There is not a transfer fee to the buyer at that time. When
the transfer is approved, the firearm is shipped to the Class
3 dealer. The Class 3 dealer then prepares a Form 4 transfer
to the buyer. The buyer pays a $200 tax stamp fee at that
time. The only interstate transfers that can be done to an
individual are those where the buyer has a Curio & Relics
License and the firearm that is being purchased has been
classified by the ATF as a NFA Curio & Relic. A $200 federal
tax payment is required to file the transfer paperwork. This
fee, as well as the Total Amount Due is due at the time
of purchase in order to process the paperwork. The new
owner of the Class 3 firearm will be required to complete
3 forms: 1) ATF Form 4, 2) fingerprint card, and 3) ATF form
5330.20 Certificate of Compliance. These forms will be
provided to you by RIAC. Note: if state or local law requires
a permit or license to purchase, possess, or receive NFA
firearms, a copy of the transferee’s (buyer) permit or license
must accompany the application. RIAC then mails the
paperwork for the Federal Transfer Tax to BATFE. RIAC will
receive back one of the Form 4’s (they are sent in duplicate)
with a Federal Tax Stamp attached to it. This is given to the
new owner upon delivery of the NFA firearm. No further
tax is due. Please check the status of your state before you
bid or purchase to be sure of your eligibility to own and
possess a Class III firearm as the laws continue to change.
SPECIAL NOTE: If you are an SOT (Special Occupation Tax)
payer (Class 3 dealer) you are able to transfer functional
NFA firearms to or from other SOT payers and government
agencies with BATFE approval, but without having to pay a
transfer tax. RIAC makes no warranties or representations
that the above-mentioned forms, fees, licenses and/or
approvals will be sufficient for you to own or use your
purchased firearm(s). Consult with your federal, state,
and local laws, law enforcement personnel, or legal
counsel to make sure you may legally own, possess, or
use the purchased firearm(s) and that all fees, licenses and
approvals are completed.
19. CONDITION OF FIREARMS. RIAC makes no warranties or
representations whatsoever and no employee or consultant
of RIAC has the authority to do otherwise, concerning the
operation of firing condition, fitness for use, safety to store,
or reliability, of any firearm, ammunition, or parts. Use of
any firearm or ammunition purchased at RIAC is entirely
at the user’s risk. RIAC offers for sale the lots as “collector”
lots only. RIAC strongly recommends that all weapons,
ammunition, etc. purchased at auction be examined by a
competent gunsmith. RIAC expressly disclaims any liability
whatsoever for accident, injury or damage resulting to any
person from the storage or subsequent use of any such lot.
20. ENDANGERED OR PROTECTED SPECIES OR WILDLIFE.
Any property made of or Incorporating endangered or
protected species or wildlife may have import and export
restrictions established by the Convention on International
Trade in Endangered Species of Wild Fauna and Flora
(CITIES). These items are not available to ship internationally
and in some cases, domestically. Additionally, these items
may be subject to confiscation by state or federal officials
if the proper documentation authorizing their sale is not
produced. By placing a bid, the bidder acknowledges that
he is aware of the restriction and takes responsibility in
obtaining and paying for any license or permits relevant
to delivery of the item(s). RIAC does not accept liability for
the inability to ship the purchased items or if such item(s)
is (are) confiscated by state or federal officials prior to their
shipment or transport to the successful bidder.
21. DELIVERY, SHIPPING, AND STORAGE CHARGES. All
delivery, shipping and storage charges must be paid by the
successful bidder prior to delivery of the firearm.
22. SHIPPING. If RIAC is asked to ship the purchased lots,
there will be a separate charge for such shipping. Shipping
charges will be based upon what it costs RIAC to ship the
purchased lots to the purchaser. If packing and handling
of purchased lots is done by RIAC, it is done entirely at
the risk of the purchaser. All items must have shipping
insurance; this insurance is mandatory. RIAC will not charge
any labor charges for shipping. RIAC is not liable for any
acts of omissions in packaging or shipping. Purchased
lots handled by outside carriers or packers, including
those RIAC may have recommended, may carry their own
insurance and any claims for losses or damages should be
addressed directly to the outside carriers or packers. RIAC
will arrange for packing and shipping at RIAC’s earliest
possible convenience. RIAC will attempt to ship as soon as
possible; however, due to RIAC’s high volume of absentee
bids, shipping can take up to two weeks after full payment
is received. In the case of crating or any exceptional
packaging, the purchaser will be charged RIAC’s cost from
outside agents. Purchaser pays shipping, packing materials,
and insurance charges. RIAC reserves the right to purchase
the outside shipper’s insurance, to be self-insured, or a
combination of both.
The shipping of any purchased items outside of the United
States is hereby classified as “foreign export”. All foreign
export is the sole responsibility of the purchaser.
23. DISPUTES UNDER THIS CONTRACT. Purchaser and RIAC
agree to mediate any dispute or claim arising between
them resulting from the purchaser participating in the
auction or any resulting transaction, with the exception of
the failure of the purchaser to make full payment of the
purchaser’s obligations to RIAC. In the event the purchaser
fails to make full payment to RIAC, RIAC may, but is not
required to, proceed directly to court. Furthermore, the
purchaser and RIAC agree that should Mediation be
necessary, Mediation fees, if any, will be borne equally by
the parties. Purchaser and RIAC are required under the
terms and conditions of sale to enter into Mediation before
arbitration or any court action. Should a party commence
legal action other than Mediation without giving written
notice to the other party, the party so commencing the
legal action will not be entitled to recover attorney’s fees
even if they would otherwise be allowed in the action. All
mediation, arbitration and court proceedings, whether in
state or federal court, shall be filed and conducted solely
within Rock Island County, State of Illinois, and not in any
other jurisdiction.
Should Mediation not settle the dispute between the
parties the purchaser and RIAC agree that any dispute or
claim, in law or equity, resulting from the participation in
the auction or any resulting transaction shall be settled
in neutral binding arbitration utilizing the standards of
American Arbitration Association and must be initiated
and carried out in Rock Island County, State of Illinois. Any
bidder or purchaser agrees that the election of restricting
any and all claims to Arbitration is a voluntary decision
and is evidenced by the bidder or purchaser’s participation
in the auction. The purchaser specifically agrees to the
following: I have read the terms and conditions of sale and
by my participation in this sale I agree all disputes arising
out of my participation will be first submitted to Mediation,
and if Mediation is not successful in resolving the dispute
I then submit to neutral binding Arbitration with RIAC
and any other entity under this contract. No lawsuit
shall be filed until a person has in good faith completed
all Mediation and Arbitration proceedings as required
hereunder.
24. LIMITATION OF LIABILITY. EXCEPT AS EXPRESSLY
PROVIDED ABOVE, ALL PROPERTY IS SOLD “AS IS”. NEITHER
ROCK ISLAND AUCTION COMPANY NOR THE CONSIGNOR
MAKES ANY REPRESENTATION OR WARRANTY, EXPRESS
OR IMPLIED, AS TO THE TITLE, MERCHANTABILITY,
FITNESS OR CONDITION OF THE PROPERTY OR AS TO
THE CORRECTNESS OF DESCRIPTION, GENUINENESS,
ATTRIBUTION, PROVENANCE OR PERIOD OF THE PROPERTY
OR AS TO WHETHER THE PURCHASER ACQUIRES ANY
COPYRIGHTS OR OTHER INTELLECTUAL PROPERTY
RIGHTS IN LOTS SOLD OR AS TO WHETHER A WORK OF
ART IS SUBJECT TO THE ARTIST’S MORAL RIGHTS OR
OTHER RESIDUAL RIGHTS OF THE ARTIST. ALL FIREARMS
AND AMMUNITION ARE SOLD AS COLLECTOR LOTS
ONLY. FITNESS TO FIRE OR OTHERWISE DISCHARGE THE
ARM OR AMMUNITION IS EXPRESSLY DENIED BY ROCK
ISLAND AUCTION COMPANY. A COMPETENT GUNSMITH
SHOULD BE CONSULTED BEFORE ATTEMPTING TO USE OR
FIRE ANY FIREARM OR AMMUNITION. THE PURCHASER
EXPRESSLY ACKNOWLEDGES AND AGREES THAT IN NO
EVENT SHALL ROCK ISLAND AUCTION COMPANY BE LIABLE
FOR ANY DAMAGES INCLUDING WITHOUT LIMITATION
ANY COMPENSATORY, INCIDENTAL OR CONSEQUENTIAL
DAMAGES.

2020, whooaaa, where to begin outside the obvious? We hope
that all of you, our clients, and your loved ones are safe and
healthy. Priorities are different for everyone, and we are all
navigating these uncharted waters in our own way through
business, personal and family issues and decisions. There
are so many gigantic, mostly negative buzzwords and topics
being thrown around on a 24 hour, daily basis: lock downs,
masks, volatility of the equity markets, elections and no college
football?? Negativity breeds negativity, and I am an eternal
optimist, but enough on that. On the “cool other side of the
pillow” we have one word, which we and so many others are
using as our north star: opportunity.
Opportunity comes in many forms and applies differently to
all of us. In the face of the pointless to list obstacles 2020 has
spewed, the great people that make up the fabric of Rock
Island Auction Company have stayed calm, cool, collected and
united. We postponed our April Premier auction, and rather than
immediately choosing an arbitrary date in the future, we applied
situational awareness eventually selecting June 5-7. We used
those additional two months as an opportunity to continue to
market the finest auction we had ever amassed. We produced
over 1000 minutes of video content, doubled down our print
and electronic advertising, and had our Premier catalog posted
and open for bidding on our website for an unprecedented 12
weeks. If you were at the sale, you know the precautions and
procedures we put in place: temperature checks, masks, social
distancing in the preview and auction hall, Plexiglas dividers for
phone bidders, check-in with lanyards, additional bathrooms,
and golf carts for getting folks around. We used our extra
building on the south side of our campus as a hospitality lounge
complete with an “offsite” bidding lounge and Sherman tank
bar. Yes, we used a 1944 M4A3 Tank as the bar. The feedback
from those who attended was tremendous. We will be applying
all of these same tactics and procedures come September.
Our June Premier auction was the largest grossing firearms
auction ever held, a watershed moment for Rock Island Auction
and fine and historic arms collecting. Great things command
great competition and June was full of spectacular objects at
virtually every price point. We would like to thank all of you
who participated, near and far, as buyers, under bidders and
consignors. I publicly want to thank our team for handling the
situation, the only way they know how, as utterly magnificent
professionals.
This September sale is very similar to the June Premier auction;
it is a virtual continuation, picking right back up where it left
off in quality and depth. Therefore, as we started working on
this catalog, we thought we had another opportunity. It is no
secret that collectors are passionate. We recognize many of you
do this as an investment in tandem as a hobby but collecting
anything, takes time, energy, patience and study. We saw this
catalog as an opportunity to make studying beyond normal
efforts worthwhile. We want the content of this catalog to inspire
and elevate some small element of a collector’s ambition. Before
you study this catalog, I ask you to apply one basic philosophy:
That no other collecting discipline than fine and historic arms
collecting
brings us closer to the past.
It is a portal to the past; a literal front row seat to history. On
a macro level, you can understand and appreciate “the times”
and even more uniquely on a micro level, you can relate to “the
individual” and actually get to know them. To inspect and study
firearms, from any era, is to see what “they” saw, and to hold
what “they” held. These mechanical objects, these tools, are
what “they “used to wage war, protect their families, feed their
families, and provide an income. In short a necessity of life, to
live. Equally, fine arms have been collected, coveted, presented
and endeared since man advanced beyond a sharpened stick;
they have been given in ceremony and celebration, victory and
defeat for centuries. Which brings me to the collection of John
Fox for example. Mr. Fox collected for well over a half a century
and had an unmistakable passion for the American frontier, the
“wild west”, and “big sky country”. The core of the collection
is composed of working guns of the frontier, tools from those
men and women, some identified, others lost to time and left to
our imagination that tamed that epic landscape and captivating
period. We coined the term “frontier issued” and it will be quite
apparent why. These guns are impartial, unbiased, relatable
and authentic. There is a certain majesty to their appearance. It
is earned and worn with pride. It is very difficult for any firearm
to be both old and in high condition. It takes a very rare series
of circumstances for that to happen. Hence, their value and
collectability. The same can be said of Mr. Fox’s frontier issued
guns. His collection, as far as I am concerned is the finest of its
type.
Next, take the Malcom King collection. Mr. King’s passion for
the best quality firearms is born out of a passion of exploration
to the last truly wild places left on earth. His collection follows
in the footsteps of those men and women who have traveled
through that same bush, up that same mountain and through the
same field.
And finally, the Dr. Gerald Klaz collection. Dr. Klaz dedicated
almost three quarters of a century to his passion. His work
represents not only the finest and most complete Smith &
Wesson collection ever assembled but also one of the finest
groupings of high art European fine arms in private hands. The
selection of fine arms from Dr. Klaz’s collection in harmony
with a few other individual pieces in this sale makes up the
largest offering of world fair/factory exhibition pieces to ever hit
the market. The world fair/exhibition pieces were not only the
pinnacle of technological advancement at the time but also the
highest form of embellishment from the finest artists to ever live.
As you will quickly see and as I said previously, this sale is a
continuation of our June Premier in terms of depth and once in a
lifetime opportunities. We hope you enjoy studying the catalogs.
Additionally, we strongly believe that there is tremendous
opportunity in the myriad of collecting options that make up this
exciting and fascinating world of fine and historic arms.
In closing, we encourage all of you who are considering
attending this sale in person to do so with confidence. We will
be following the exact same protocols we used in June that I
previously mentioned. If traveling is not for you at this time we
understand and are here to assist you in any way we can to
make the bidding process as simple and easy as possible. You
might also consider a preview by appointment leading up to the
auction. As a friend who visited our preview hall for the first time
in June said to me, “your catalogs brings the guns to life and
your preview hall brings your catalog to life.” It is worth seeing
in person at least once! We look forward to seeing everyone in
September!
Respectfully,
Kevin Hogan
About This Auction
Index - Volume I
FRIDAY LOTS 1 THRU 638
TYPE LOTS PAGES
Winchester Lever Action Rifles/
Volcanic/Henry Rifles/Evan Rifles 1 - 55 8 - 65
The John Fox Collection 56 - 114 66 - 126
Colt Percussion Revolvers 115 - 135 127 - 137
Civil War Arms 136 - 162 138 - 155
Colt 1st Generation Single Action Revovlers/
Early U.S. Military Arms/Antique Deringers 163 - 209 156 - 196
The index is an aid to indicate when a genre will be sold by lot # and page # within the auction catalog.
TYPE LOTS PAGES
Antique Smith & Wesson Revolvers 210 - 248 197 - 216
Antique European Flintlock and Percussion Pistols 249 - 287 217 - 253
The Malcolm King Collection 288 - 307 254 - 269
Shotguns/Sporting Arms 308 - 371 270 - 311
U.S. Military Arms 372 - 423 312 - 328
Class III Arms 424 - 434 329 - 335
German/European Military Arms 435 - 501 336 - 353
Sporting Arms/Colt Snakes/Black Sporting Rifles 502 - 638 354 - 386
5

Not All Art
Lot 55
Phenomenal, Well-Documented,
Museum Quality L.D. Nimschke
Identified Exhibition Quality Panel
Scene Engraved Evans Repeating Rifle
Co. Transition Model Lever Action
Musket Masterpiece
There is an undeniable satisfaction in refinement. From the aroma of a well-aged bourbon, to the elegant
lines and beautiful complications of a fine timepiece, there comes a certain pleasure by being in the
presence of excellence. It is a moment of respite – a pause - that not only acknowledges those responsible
for its creation, but also a pride in partaking in such quality. The investment of time and hard work
draws one toward those who also make that same investment. After all, a job well done bears the
sweetest fruit.
The concept is anything but new. For centuries, those who have found success have celebrated
it richly. Monuments have been built, symphonies written, cathedrals raised, and elaborate presentations have been
made across recorded history. Kings and nobility frequently commissioned ornate pieces of armor and lavish
weapons to signify an important victory or a new alliance. It was only natural when battlefield arms and
armament evolved into firearms, they too should be finely crafted – serving not only as a celebratory
gift, but as a lasting legacy of one’s accomplishments.
Almost as long as fine arms have been used as recognition, they have been collected for
many of the same reasons things are appreciated today: elegance, function, beauty, sentiment,
craftsmanship, and history. Just as today one appreciates refinement, so too have our forebears
extolled a well-executed process of creation.
Fine arms are not only appreciated for their style and craftsmanship; they are a
mishmash of dualities and contradictions. Consider their functions. They can serve as
beautiful, generational gifts or as an implement of war. They are simultaneously art and
functional tool. They are bygone history, yet present today. They are romance and
they are combat.
One need not be a firearms cognoscenti to appreciate their myriad
facets of appeal. Anyone who enjoys art, engineering, manufacturing, history,
or the evolution of human technology through the centuries will find an
area of arms collecting that speaks to them. It can also be quite financially
attractive. Plainly put, this centuries old past time represents a great deal
of underappreciated art and undervalued investments. Consider that in
2018, Picasso’s 1905 masterpiece ‘Fillette à la corbeille fleurie’ sold for
$115 million. That same year a 1962 Ferrari 250 GTO brought $48.4
million, the most expensive car sold at auction. Coincidentally,
the most expensive single firearm ever sold at auction was
also achieved that year, a cased Colt Model 1847
Walker revolver that brought $1.84
million. To call anything priced at
seven digits a bargain seems
facetious at best, but the
fact remains that the

Is Framed
very pinnacle of firearms collecting can be reached for substantially less investment than other collectible genres.
It is a rare phenomenon that items steeped in tradition can also serve as a modern-day opportunity, where an
investment can serve as a legacy. Yet collector firearms do just that. They are the collision between form and function. In
them is all the skill and aesthetics of art, as well as the calloused brutality of war. They are history and technology. Perhaps
most importantly, they provide a tangible link to the past. To know a firearm’s story and to hold it in your hand is to stand
awestruck in the footsteps of those who held it first. It is to appreciate the same qualities decades or even centuries apart. It is
to become the next step in a legacy, and to enjoy the pride that brings.
Far and away, the most prolific purveyor of high quality, collector firearms in the world today is Rock Island
Auction Company – a title they’ve held undisputed since 2003. The business has passed from father to son, an appropriate
coincidence given that outdoorsman traditions and the gentleman’s pursuit of arms collecting have long been legacy
activities. Passed from generation to generation, family military weapons, memory-saturated hunting arms, and fine
collector firearms all carry with them the gravitas of what we cherish most: tradition, family, pursuit, sacrifice, and a
respect for those that came before us.
While RIAC is known world-wide for offering 7- and 6-figure firearms, their offerings are available to
collectors of any experience level. This is practically a necessity given the new clientele they continue to add to
their ranks, including art collectors, investors, sportsmen, historians, or those who simply find beauty in an
exciting and unexpected place.
Their work is their passion. Whether fostering that ancient rite when stewardship of a fine arm is
transferred, or by introducing this extraordinary pastime of kings to new audiences, their legacy is building
legacies. It is a zeal bordering on obsession to preserve the history, memory, craftsmanship, and
freedom inherent in every ounce of steel and every burl of walnut.
Whether you’re seeking to preserve a legacy of your own, or to begin one anew, we at
Rock Island Auction Company have the experience and a proven track record to bring those
aspirations to life.
Attractively Etched and
Silver-Gilt English John
Prosser Presentation
Saber with Relief Eagle
Head Pommel Inscribed
to Lieutenant-Colonel
Stephen Arthur Goodman of the
Georgetown Brigade of Militia
During the Demerara Rebellion of
1823 with Scabbard
Lot 1338 Lot 135
Historic Cased “National Treasure”
Gustave Young Deluxe Factory
Engraved Colt Factory Presentation
Model 1851 Navy Percussion
Revolver Inscribed from Colonel
Colt Workmen to U.S. Secretary
of War and Future Civil War
Confederate General John B. Floyd
with Documents

Collector’s Fact
1 of only approximately
5,000 manufactured with a
flat side receiver.
BOTH SIDES PICTURED
LOT 1
Desirable Early Production Thee Digit Serial
Number Winchester Model 1895 Flat Side Lever
Action Rifle - Serial no. 884, 30 U.S. cal., 28 inch round bbl., blue
finish, walnut stock. Manufactured in 1896, the second year of production
and serialized with a three digit
number. This rifle is 1 of only 5,000
manufactured with the desirable flat side receiver. The
rifle is equipped with German silver blade and elevation
adjustable sights on a barrel marked with the two-line
address and “30 U.S.” on top. The upper tang is marked
“WINCHESTER/MODEL 1895.” Directly behind the trigger it is marked “PAT
NOV. 5, 1895/-- NOV. 12, 1895 --.” The serial number is marked on the lower tang. Mounted
with a smooth tapered forearm with an ebony insert and straight grip stock with a steel crescent buttplate.
CONDITION: Very fine, retaining 80% original blue finish with a mix smooth plum and brown patinas on the balance. There
are a couple spots of minor pitting on the left side of the receiver. 70% original case colors remain on the buttplate and hammer. The wood is also
very fine showing a patch of chipping near the toe and some minor scratches. Mechanically excellent. A very fine early production flat side Model 1895 that
will make a great addition to any Winchester collection.
Estimate: 7500 - 11000
BOTH SIDES PICTURED
8
LOT 2
Excellent Winchester Model 1873 Lever Action
Musket with Bayonet - Serial no. 569747B, 44 WCF
cal., 30 inch round bbl., blue finish, walnut stock. Manufactured
in 1903. This high condition Model 1873 musket is a third model with the dust cover
guide integral to the receiver and a dust over with rear serrations. The top of the barrel is
marked with the two-line address/patent date information ahead of the rear sight and “44 W.C.F”
at the breech. The bottom of the brass cartridge elevator is marked “44 CAL.” The upper tang is marked
“MODEL 1873” flanked by decorative foliate, and the serial number is on the lower tang behind the lever latch. It is fitted
with the correct inverted “V” front sight and the folding military tangent rear sight graduated to 800 yards. Mounted on a smooth full length forearm and straight grip stock.
The stock is fitted with a carbine style buttplate with trapdoor. The forearm is secured by three barrel bands, and there is a sling swivel on the middle band. A second sling
swivel is mounted on the underside of the buttstock. Comes with a five piece cleaning rod and socket bayonet.
CONDITION: Excellent, retaining 98% original blue finish showing some high edge wear on the barrel bands and very limited minor scattered dark spots of pitting on the forward
lower receiver. Nearly all of the vibrant original nitre blue remains on the loading gate, and 98% original case colors remain on the hammer, lever and buttplate. The wood is very
fine showing some chipping along the grain near the stock toe and some scattered minor dings. Mechanically excellent. The bayonet has mostly a bright appearance. A high
condition Model 1873 musket perfect for your growing Winchester collection!
Estimate: 5500 - 7500

BOTH SIDES PICTURED
LOT 3
Desirable Glass Winchester Store
Display Gun Cabinet - This factory store
display cabinet was manufactured by the
Walrus Manufacturing Co. in the early 1900s
to aid Winchester dealers in displaying their
Winchester long guns. The typical Walrus
Manufacturing Co. plaque is present on the
floor plate. The cabinet door is numbered
“777” on the top edge. It is constructed of
hardwood, possibly walnut, with full length
glass panels and a cathedral top with glass
panels. It stands approximately 73 inches
in height on four legs with brass sheathed
feet, and each side is approximately 18
inches wide. The inside display height is
approximately 45 inches. On the inside
is a four sided rack that will hold 20 long
guns. All four sides are 5/8 inch thick and
are marked “WINCHESTER” in white and
black bordered red letters with black
lettered “PATENT APPLIED FOR” on a white
background below. The bottom of the case
and the inner edge of the rack is
lined with green felt.
CONDITION: Fine overall, with some
scattered light handling/storage marks,
moderate crazing/crackling of the original
varnish, mildly faded labels and upper felt,
and replaced floorplate felt. A must have for
the proper display of a fine
Winchester collection!
Estimate: 9500 - 16000
LOT 4
Exceptional Early Production Antique Winchester
First Model 1890 Slide Action Solid Frame Rifle
with Casehardened Receiver and Factory Letter -
Serial no. 5325, 22 L cal., 24 3/8 inch octagon bbl., blue/
casehardened finish, walnut stock. Manufactured in 1891.
The accompanying factory letter lists this rifle chambered in
.22 Long when received in the warehouse on September 15,
1891 and shipped the same day. German silver blade front
and standard fixed notch rear sights on the earl 24 3/8 inch barrel with first style barrel inscription with the “broken D” in
manufactured, “22 LONG.” caliber marking on the upper flat at the breech, Winchester proofs correctly absent, first model
solid frame receiver, and standard three-line maker, model, and patent marking on the upper tang. 12 groove slide handle
and plain walnut straight grip stock with casehardened crescent buttplate.
CONDITION: Excellent overall with 98% blue and casehardening over all, vibrant throughout. The operation slide is bright
and has probably been cleaned. There are drift marks on the rear magazine tube support and barrel in that vicinity. The
casehardening colors on the receiver are brilliantly bright on the butt plate. The wood is also excellent with minor dents
and scratches. The action remains stiff from hardening grease. A wonderful and rare solid frame 1st model is spectacular
condition. provenance: The Kidd Brother Collection, property of a gentleman.
Estimate: 12000 - 18000
9

10
LOT 5
Desirable Winchester “Double W” Cartridge Display Bullet Board - The board is mounted in a wood frame
measuring approximately 57 inches wide by 40 inches tall. A gold painted border is mounted around the green
board which measures approximately 49 inches by 31 1/2 inches. The board displays a dark green background,
red and white lettering and vignettes of game and hunting scenes (see photograph). The display consists
of various cartridges and shotgun shells and nine spaces for containers of primers, each described below in
white lettering. A few assorted cartridges are absent from the board as well as three cap tins (see photograph),
includes two detached brass shells, one paper shell, and the remnants of a patched bullet. The lower right corner
reads “FORBES CO. BOSTON.” The back of the board has the original “PRESENTED WITH COMPLIMENTS OF THE
WINCHESTER REPEATING ARMS CO. PLEASE HANG IN A PROMINENT PLACE”, paper label affixed to the center and
is marked “NO 1611”.
CONDITION: Very good overall, showing some
small spots of discolorations to the backing
board, an area of separation from the backing
in the lower right hand corner, nearly all of the
gold painted inner frame, and some varnish
loss on the frame. A few of the mounting nails
have been driven through the frame over
time. The original paper on the back is still
intact. Overall a desirable Winchester bullet board in hard to find original condition and becoming increasingly
collectable. A must have for the serious Winchester collector!
Estimate: 16000 - 25000

Rare Documented Wilkinson & Sons Engraved and Etched Winchester Model 1873 Deluxe Rifle
AS LISTED BY SERIAL NUMBER
IN THE BOOK WINCHESTER NEW
MODEL OF 1873, VOL. II BY GORDON
12
LOT 6
Extraordinary Documented Wilkinson & Sons Engraved and Etched
Winchester First Model 1873 Deluxe Lever Action Rifle - Serial no.
6194, 44 WCF cal., 24 inch bbl., blue/plated finish, fancy walnut checkered
stock. This Winchester First Model 1873 Sporting rifle was manufactured
c. 1875 and subsequently embellished and retailed by Wilkinson & Son.
This rifle has the very desirable First Model receiver with grooved dust
cover guides and dust cover with oval, checkered finger grip. The rifle
has the early style lever latch with visible threads. The rifle has a blued,
24-inch round barrel with full length magazine. The top of the barrel is
flattened and the flat has a file cut matted finish. The barrel has a dovetail
mounted Express front sight with bright bead and Express style rear
sight with three folding leaves marked “100, 200” and “500”. The top barrel
flat is hand-engraved: “WILKINSON & SON GUNMAKERS TO HER MAJESTY
& THE PRINCE OF WALES” ahead of the rear sight reading towards the
muzzle. A folding leaf peep sight with fifty minute graduations is mounted
on the receiver tang. The forearm cap, receiver, dust cover, hammer and
lever are nickel silver plated. The loading gate has a fire blue finish. The
forearm cap, sides of the receiver, sideplates, lower tang, dust cover, sides
of the hammer and bottom of the lever are acid etched with English style
scroll-work on a stippled background. The etching is very similar to the
etching found on high quality Wilkinson military swords of this period.
The right front of the receiver is etched with the Prince of Wales feathers
above a banner reading “BY APPOINTMENT”. The opposite side of the
receiver is etched “WILKINSON/PALL MALL” in two banners surrounded by
scrollwork. The color casehardened shotgun style buttplate is checkered
and decorated with delicate English style scroll engraving. The stock and
forearm are deluxe highly figured walnut with checkered panels and a
high polish piano finish, the right side of the stock is stamped with the
collection number “58”. The London “crown/VP”, “crown/GP” and definitive
proof marks are stamped on the left side of the barrel near the receiver
and a “crown/V” inspection mark is stamped on the left side of the receiver
above the chamber. The serial number is marked in script numerals on
the lower tang behind the lever latch. A small number of early production
Model 1873 Winchesters were imported into Great Britain by The London
Armory Company and other British dealers. This rifle, identified as “Serial
# 6194, Rifle ‘Prince of Wales’” is listed with the serial numbers of 33 other
Model 1873 rifles and carbines with British proof marks on page 553 of
“WINCHESTER NEW MODEL OF 1873, VOL. II” by James Gordon. It is not
clear if this rifle was engraved and finished by Wilkinson expressly for the
Prince of Wales (later Edward VII) or whether the marking denotes that
Wilkinson & Son were appointed as gunmaker to the Prince of Wales. In
any case this is a unique deluxe special order Winchester First Model 1873
Sporting Rifle. A group of 30 Model 1873s (15 rifles and 15 carbines) were
shipped from Winchester to James Kerr and the London Armoury in 1875,
the same year this rifle was manufactured. These special order Model
1873s had casehardened receivers and some had deluxe walnut stocks.
On several of these guns Kerr engraved a Prince of Wales presentation
inscription and inlaid silver plaques featuring the Order of the Star of India.
These ‘73s were presented by the Prince of Wales to Indian officials while
traveling through India in 1875. On page 43 of “Winchester: An American
Legend,” author R.L. Wilson lists 6 serial numbers of Prince of Wales
presentation Model 1873s. These rifles included numbers 6597, 6604, and
6618 which are only a few hundred numbers away from this rifle (6194).
CONDITION: Extremely fine. This rare rifle is all original and retains 85% of
the blue and plated finish applied by Wilkinson. The barrel and magazine
have 90% plus blue finish with a few minor scratches and handling marks
with some finish loss at the muzzle and magazine tip. The hand engraved
barrel legend is clear. The forearm cap, receiver, dust cover, hammer and
lever have 90% plus plated finish.

Historically Significant Special Order Prince of Wales Royal Presentation Rifle Presented During his Tour of India
The loading gate retains 85% of the nitre blue finish. The delicate English scroll
engraving and Wilkinson markings are sharp. At least 85% of the blue finish remains on
the folding leaf rear sight. The shotgun buttplate shows typical handling wear; the case
colors have faded to a dark patina with scattered age spotting. The fine engraving on
the buttplate is clear and the checkering is sharp. The highly figured walnut stock and
forearm remain in very good condition with scattered handling and storage marks. The
checkering on the stock and forearm is sharp. The stock and forearm retain nearly 90%
of the piano finish. This is both an attractive and stunning example of a Winchester First
Model 1873 Sporting Rifle that may have been made especially for the Prince of Wales.
Estimate: 30000 - 50000
13

BOTH SIDES PICTURED
LOT 7
New Haven Arms Co. Henry Lever Action
Rifle - Serial no. 8195, 44 Henry RF cal., 24
inch octagon bbl., blue finish, walnut stock.
Manufactured by the New Haven Arms Co. in
1865. The barrel is fitted with a German silver
blade front sight and a folding ladder rear sight graduated to
900 yards and is stamped with the two-line patent date/address
marking (“HENRY’S PATENT. OCT. 16. 1860/MANUFACT’D BY THE NEWHAVEN ARMS.CO. NEWHAVEN.CT”). The rifle
is fitted with a sling hook loop and a sling swivel on the left side of the buttstock. The serial number is found on the barrel, left side of lower
tang, stock inlet, and buttplate. The brass buttplate has a trapdoor (cleaning rod not included) and pointed heel. The left side of the buttstock has
period inscribed initials hand marked in script. Most Henry Rifles manufactured during the Civil War were privately purchased by Federal soldiers from Midwestern
regiments. The firepower of the Henry Rifles was valued on the frontier in the years that followed the Civil War. Most Henry Rifles were “working guns;” the surviving
examples typically exhibit wear associated with years of hard use.
CONDITION: Good. The barrel and magazine tube have a mixed artificial brown patina with minor-moderate pitting. The brass has an attractive mellow appearance, and
the receiver has tight fitting side plates. The lightly sanded and reoiled stock is also good with some minor dings and scratches. Mechanically excellent.
Estimate: 11000 - 16000
LOT 8
Scarce Engraved
Jennings Breech Loading
Smoothbore Conversion Rifle - Serial no. 465, 54 percussion cal., 26 1/2 inch round bbl., blue/casehardened finish, walnut stock. Only a small
number of the Jennings rifles were manufactured by Robbins and Lawrence in 1848-1852. The Jennings rifles mark the important second step in
the evolution of what eventually became the Volcanic, Henry, and Winchester lever actions. Work on the Jennings rifles at Robbins and Lawrence is credited with bringing together
B. Tyler Henry, Horace Smith, and Daniel Wesson under the same roof and
thus helped lead to what became both the highly successful Winchester
lever action series and the iconic Smith & Wesson partnership. Beginning
in 1852, Robbins and Lawrence abandoned the
underpowered rocket ball cartridge in favor of
building muzzle loading variants.
BOTH SIDES PICTURED
14
Many of the original breech loaders were altered by outside gunsmiths into muzzle loaders as well. It still has the round pill primer on top and
a rectangular loading cut out. The ring trigger that originally pushed the breechblock into place and operated the automatic pill primer on the
breech loading versions now functions simply as a trigger for the hammer. The only visible markings are “WINDSOR VT.” on the left side of the
receiver, “465” on the lower tang, and a scroll engraving on the receiver and buttplate. It has fixed blade and notch sights, a smooth straight wrist
stock, and a rifle buttplate.
CONDITION: Fair, showing mostly a smooth dark brown patina with some minor pitting scattered throughout and visible engraving. The wood has
minor dings and scratches throughout. Mechanically fine.
Estimate: 3000 - 4000

INCLUDED WITH THE
LOT IS A RARE ORIGINAL
VOLCANIC ROCKET
BALL CARTRIDGE
BOTH SIDES PICTURED
LOT 9
Factory Engraved Smith & Wesson No. 2 Lever Action Pistol - Serial no. 137, 41 Volcanic cal., 8 inch part octagon bbl.,
blue finish, rosewood grips. This is a desirable example of one
of the fewer than 500 No. 2 Larger Frame Lever Action Pistols
S&W manufactured in 1854-55. The pistol has an 8 inch part
octagon barrel in .41 caliber, integral 10-shot magazine, flat muzzle, pinched front sight,
early round cartridge follower and screw fastened “L” shaped notch rear sight numbered
to the gun. The lever has a finger spur. The top barrel flat is stamped “SMITH & WESSON/
NORWICH CT./CAST-STEEL” followed by “PATENT.” The serial number is on the left side of
the grip frame. The correct last two digits of the serial number (“37”) are stamped on the
back of both grip panels. Factory engraved floral scroll patterns are featured on the receiver and side plates. Engraved leaf patterns are featured on top of the receiver,
back of the hammer, and back strap. Comes with a rare original Volcanic rocket ball cartridge. These pistols are highly prized due to the limited production quantities and
historical significance as a pioneering arm to both Smith & Wesson and Winchester collectors. Includes one original cartridge.
CONDITION: Very good. The barrel and magazine have a smooth brown appearance. The frame has an attractive gun metal appearance. The engraving is crisp. The rosewood
grips are fine with some minor dings and scratches. Mechanically fine. With fewer than 500 manufactured the No. 2 S&W Lever Action is a difficult pistol to obtain in any
condition and is a must have for any antique American arms collector.
Estimate: 11000 - 16000
BOTH SIDES PICTURED
The Dr. Gerald Klaz Collection
Collector’s Fact
1 of approximately
350 produced in total
by Italian maker
Pietro Venditti.
LOT 10
Extremely Scarce Engraved Venditti Lever Action Pistol - NSN, 9 mm cal., 6 3/4 inch octagon bbl., blue/bright
finish, walnut grips. This extremely scarce lever action pistol is one of only 350 manufactured across the first and
second models of Italian maker Pietro Venditti. This pistol is similar in many ways to the American Volcanic Pistols, and until recently was
thought to have influenced Horace Smith and Daniel Wesson in their design. It is now surmised, that Venditti did not have his first experience
with firearms design until after his release from prison in 1860, well after Smith & Wesson had patented their design. This is supported by the lack
of any appearance of this mechanism in the “Catalogue of the Great Exhibition” printed in 1851 where Smith and or Wesson supposedly got the
idea, as well as the fact that no documentation exists showing either man leaving the United States at that time. For more information on this subject
see pages 145-148 of “Volcanic Firearms: Predecessor to the Winchester Rifle” by Edmund Lewis and Stephen Rutter. The barrel bears the second model style
marking “VENDITTI E CI LANCUSI” on the top flat. This marking is flanked by factory engraved scrollwork that extends to the top of the frame,
frame sides at the front, side plates, and back strap. The frame is brass with iron side plates. The pistol has fixed sights, a 10-shot tubular magazine,
two piece checkered grips with escutcheons, and lanyard swivel.
CONDITION: Fine, showing the 50% of the original blue remaining on the sideplates. The barrel, lever, and hammer have a polished bright finish and areas
of light pitting. The grips are very fine with some dings and scratches and well-defined checkering. Mechanically needs work as the elevator does not
properly function.
Provenance: Dr. Gerald Klaz collection.
Estimate: 5000 - 7000
15

The Dr. Gerald Klaz Collection
LOT 11
Incredibly Rare Volcanic Repeating Arms Co. 200
Count No. 2 Volcanic Cartridge Tin with Ammunition -
Volcanic pistols and carbines are among the most
recognizable and collectible of all American firearms and
are very scarce, and cartridges and cartridge tins that go
along with them are even more rare and are certainly
valuable additions to collections containing Volcanic
firearms. The tin has a paper label inside that reads “200
No. 2/PISTOL CARTRIDGES,/MANUFACTURED BY/THE
VOLCANIC REPEATING ARMS CO.,/NEW HAVEN, CONN.”.
The cartridges themselves are .41 caliber and .67 inches
long and have seven grooves and brass bases. The tin is
mostly full and contains approximately 180 rounds in two
layers (estimated as the top layer was not removed). Very
similar tins and labels are shown on pages 48 of “Volcanic
Firearms: Predecessor to the Winchester Rifle” by Lewis and
Rutter. These cartridges are among the first self-contained
cartridges and were integral in the evolution of firearms
ammunition and of course the famous lever action
firearms they were designed for.
CONDITION: Very fine, showing some areas of tarnish
on the exterior of the tin. The label is complete and fully
legible with a few areas of discoloration. Some of the
ammunition has ruptured, however, the vast majority
appear to be solid. A rare opportunity to own a nearly
complete tin of this highly sought after ammunition!
Provenance: Dr. Gerald Klaz collection.
Estimate: 15000 - 25000
SIMILAR EXAMPLE PICTURED AND
DESCRIBED IN THE BOOK VOLCANIC
FIREARMS BY LEWIS AND RUTTER
16

One of Only Two Known Factory Engraved Smith & Wesson Lever Repeating Pistol-Carbines with Detachable Stock
AS PICTURED AND
DESCRIBED IN THE BOOK
VOLCANIC FIREARMS BY
LEWIS AND RUTTER
The Dr. Gerald Klaz Collection
18
LOT 12
Extremely Rare Documented
Factory Engraved Smith & Wesson Lever
Action Repeating Pistol-Carbine with
Detachable Stock - Serial no. 2, 41 Volcanic
cal., 16 1/2 inch bbl., blue/silver-plated finish,
rosewood stock, rosewood grips. This factory deluxe engraved Smith & Wesson Lever Action Pistol-Carbine was
manufactured by S&W as a display piece. This is one of six pistol-carbines manufactured by S&W and one of only
two pistol-carbines known to collectors. This carbine, serial number “2” is extensively illustrated and described on
pages 35-36 of “VOLCANIC FIREARMS” by Edmund Lewis and Stephen Rutter. The pistol-carbine has a Type III frame
which lacks the hump behind the hammer found on earlier S&W frames and 16 1/2-inch full-octagon barrel with
integral magazine. The barrel has a crowned muzzle, rounded T-bar spring, full rib, small clam-shell shaped follower and
dove-tail mounted front sight. The top barrel flat is roll-stamped: “PATENT/FEB. 14. 1854”, “SMITH & WESSON/NORWICH.
CT.” and “CAST-STEEL” in three blocks. The receiver has a sporting style rear sight with elevation wheel, lever with finger
spur and single lever spring screw. The hammer has fine hand-cut knurling on the spur. The serial number “2” is stamped
on the left side of the frame beneath the grip. The two-piece, flared butt, rosewood, grips have a high polish piano finish. “2”
is stamped on the inside of both grips. The detachable carbine stock is attached to the pistol by lug that fits a hole in the back
strap and is secured by a thumb-wheel on the pistol butt. The stock is highly figured rosewood with a piano finish and crescent
steel buttplate. The top and sides of the barrel, sides and top of the receiver, sideplates, cartridge elevator, back strap, top of the hammer,
bottom of the lever, stock yoke and buttplate are engraved with detailed scroll and feather motifs. The barrel is blued and the receiver is silverplated.
The hammer, trigger, lever, stock yoke and crescent buttplate are color casehardened. The description in VOLCANIC FIREARMS states this pistol-carbine was
acquired from the Wesson family by sporting goods dealer Abercrombie & Fitch of New York City and were purchased by Allen S. Kelly.
CONDITION: Very fine. This extremely rare pistol-carbine is all original and retains 80% of the blue and silver-plated finish. The barrel/magazine retains 90% of the blue finish
with crisp engraving. The S&W markings on the top flat are clear. The front sight blade is broken and the barrel cap has a 2 inch crack on the left and top flats. The delicate silver-plated finish on
the receiver is frosted with tarnish and scattered age discoloration but remains 70% intact. The fine scrollwork engraving on the receiver and sideplates is crisp. The rear sight has a dark patina
with traces of fire blue finish. The case colors on the hammer, trigger, lever, stock yoke and buttplate have aged to a smooth, mottled, gray-brown patina.

Originally Manufactured by Smith & Wesson as a Display Piece and Maintained by the Wesson Family
The grips retain 80% of the piano finish with some scattered flaking and shallow handling
marks. The highly figured rosewood stock is in very fine condition and retains 90% of the piano
finish with a few scattered and very insignificant storage marks. Typical minor bolt adjustment
needed. This is an extremely rare and very well documented display grade Smith & Wesson Lever
Action Repeating Pistol-Carbine with detachable stock. This unique pistol-carbine would be a
standout piece in the finest collection of historic American firearms.
Provenance: Wesson family, Abercrombie & Fitch, Alan S. Kelley, Calhoun Norton and Dr. Gerald Klaz.
Estimate: 55000 - 85000
SERIAL NUMBER 2
The Dr. Gerald Klaz Collection
Collector’s Fact
According to Volcanic Firearms by Lewis and Rutter,
only 6 Smith & Wesson pistol-carbines were produced,
only 2 of which are still known to collectors.
19

BOTH SIDES PICTURED
LOT 13
Very Fine, Rare Antique Winchester Model 1887 Semi-Deluxe Lever Action
Shotgun - Serial no. 10269, 12 gauge, 30 inch round bbl., blue/casehardened finish, walnut
stock. Manufactured in 1888. Single bead sight on the barrel with a 2 5/8 inch chamber and
choke measuring modified. Standard “WRACO” monogram on the left side of the casehardened
receiver. The bottom of the barrel and top of the breech block have British proofs, and the lower tang is
marked “722” under the highly figured checkered pistol grip stock. Smooth two-piece slab forend and checkered pistol grip
stock with checkered iron buttplate and 13 inch length of pull.
CONDITION: Very fine, retains 70% original blue and 60% plus vivid casehardened finishes with the balance mostly a grey patina, some light brown speckling on
the receiver and some scattered light pitting. The wood is fine with minor dings and scratches throughout, a moderate chip at the toe (mainly in the buttplate), and mostly
well-defined checkering. Mechanically excellent.
Estimate: 5500 - 8500
BOTH SIDES PICTURED
20
LOT 14
Exceptional Winchester Model 1873 Lever
Action Musket - Serial no. 569742B, 44 WCF cal., 30 inch
round bbl., blue finish, walnut stock. Manufactured in 1903 as a Third
Model with integral dust cover rail and dust cover with serrated rear edge. Front sight has a
base that serves as a bayonet lug, and the rear sight is a folding ladder. The barrel is stamped with
the two-line address/patent dates marking ahead of the rear sight and “44 W.C.F.” at the breech. The
brass cartridge elevator is marked “44 CAL.” The model marking is on the upper tang. The straight grip stock is
fitted with a trapdoor buttplate containing a five-piece cleaning rod.
CONDITION: Excellent, retaining 97% original blue finish with some scattered flaking turned brown and some scattered
pitting. 98% original niter blue remains on the loading gate. 98% vivid original case colors remain on the hammer, lever
and buttplate. 99% bright original nitre blue remaining on the loading gate. There is a series of tool-like marks at the
middle barrel band, otherwise the wood is also excellent with some scattered minor dings. Mechanically excellent.
Estimate: 4500 - 7000

Magnificent Deluxe First Model Factory Engraved New Haven Arms Co. Henry Rifle
LOT 15
Scarce Deluxe, First Model Factory Engraved New
Haven Arms Co. Henry Lever Action Rifle - Serial no.
1443, 44 Henry RF cal., 24 inch bbl., blue/silver-plated
finish, varnished walnut stock. This deluxe, factory
engraved Henry rifle was manufactured in late 1862. The
brass receiver and crescent buttplate are silver-plated,
and the barrel and integral 15-shot magazine are blue.
The stock is nicely figured walnut with a high polish piano
finish. The early style receiver has the rear sight mounted
in the alternate sight dovetail behind the ejection port.
The folding leaf rear sight has rounded top with 900
yard center notch. The rear sight dovetail on the barrel is
filled with a factory blank. The gold-plated, nickel-silver
front sight blade is the early, half-moon pattern. The
magazine has the early style, small diameter follower,
and the receiver has the narrow, straight follower cut.
The buttplate has the early style, rounded heel and is
fitted with a hinged trapdoor. The serial number, “1443,”
is stamped on the top barrel flat, left side of the lower
tang beneath the stock, in the upper receiver tang inlet
of the stock and on the inside of the buttplate below
the trap. The hand-fitted buttplate and tang screws
are all stamped with the rifle serial number. All of the
visible serial numbers match. The top barrel flat is rollstamped
with the first style legend: “HENRY’S PATENT.
OCT. 16. 1860/MANUFACT’D BY THE NEWHAVEN. ARMS.
CO. NEWHAVEN. CT.” in two-lines. The early style legend
utilizes seriffed letters except for the second “NEWHAVEN”
which is stamped in block letters. The rifle is not fitted
with the sling swivel and loop for sling hook which were
special order items on early production Henry rifles. The
receiver and buttplate heel are decorated in the early
style of New Haven Arms Co. factory engraving. The
engraving features large scrollwork with large curls with
leaf and scroll terminals on a punch dot background.
The early factory engraved Henry rifles did not have the
large flower petal design on the forward receiver panels
found on later production rifles with factory engraving.
The engraving on the right side of the receiver is nearly
identical to Henry rifle serial number 1441 illustrated and
described on page 15 of “THE BOOK OF WINCHESTER
ENGRAVING” by R.L. Wilson. The left side of the receiver
has the same scroll style as the right side with the addition
of a geometric pattern engraved between the side
plate scrolls. Henry rifle serial number 1570 has similar
engraving and is illustrated on page 19 of “THE BOOK OF
WINCHESTER ENGRAVING”. Most factory engraving on
Henry rifles is believed to have been executed by Samuel
J. Hoggson. In November 1862, the retail price for a Henry
rifle was $42.00 and silver-plating and engraving were an
additional $10.00.
The Gateway Collection
21

An Ideal Investment Opportunity - From the Gateway Collection
During the first year of production, the New Haven Arms Co. manufactured
a significant number of deluxe factory engraved Henry rifles. Some of these
deluxe rifles were intended for presentation to promote the new Henry
rifle. As sales increased toward the end of 1862, the New Haven Arms Co.
produced fewer deluxe engraved rifles like this example and concentrated
on the production of standard Henry rifles for sale to individual Federal
soldiers who recognized the firepower offered by a repeating rifle with a
15-shot magazine. Deluxe, factory engraved Henry rifles are scarce.
CONDITION: Fine. The rifle retains nearly 60% of the original silver-plated
finish on the frame. The barrel/magazine has a plum brown patina with
strong traces of the bright original blue finish which is in protected areas.
The surfaces of the barrel/magazine are smooth with no pitting and
minimal handling marks. The barrel edges are sharp. The serial number
and New Haven Arms legend are crisp. Significant amounts of the delicate
silver-plated finish is present on the sides and protected areas of the
receiver. Traces of silver plating remain on protected areas
of the buttplate. The plating has tarnished with age and has
a blue tint. The well executed factory engraving remains crisp
and deep; the only significant wear is on the heel of the buttplate.
The casehardened, hammer, trigger and lever have a dark brown patina.
The lever was repaired/refinished during the period of usage matches
the finish on the hammer and trigger very well. The nicely figured walnut
stock is in very fine condition and retains most of the high polish piano
finish. The stock has a few minor dents and scratches. This handling wear is
located primarily on the lower left side and bottom of the stock. This is an
outstanding example of a first year production Henry lever action rifle with
early features and very desirable deluxe silver-plated finish and
factory engraving.
Provenance: The Gateway Collection.
Estimate: 65000 - 95000
The Gateway Collection
22

Attractive Presentation Inscribed Deluxe Winchester Model 1873 Rifle
24
LOT 16
Documented Presentation Winchester Deluxe
Model 1873 Lever Action Rifle Inscribed to a
Preeminent Twin Cities Milling Engineer with Factory
Letter - Serial no. 245324, 38 WCF cal., 24 inch octagon bbl.,
blue/casehardened finish, walnut stock. Manufactured in 1887, this is a high
condition, presentation deluxe Model 1873 rifle with a third model frame
consisting of a dust cover rail integral to the receiver and dust cover featuring
serrated finger grip on the rear. The accompanying factory letter lists this rifle
with an octagon barrel in .38 caliber, casehardened receiver, plain trigger and
checkered pistol grip stock when received in the warehouse on July 28, 1887 and
shipped the next day. The barrel is stamped with the two-line address/patent dates
marking ahead of the rear sight and “38 WCF” at the breech and is fitted with a blade front
sight and an elevation adjustable buckhorn rear sight. The left side plate has a presentation
inscription which reads, “Wm de La Barre/from/T.R. Butman.” The upper tang
is marked “MODEL 1873.” The lower tang has the serial number. The cartridge elevator is
marked “38 CAL.” The barrel, magazine tube and dust cover are blue, the loading gate is nitre blue, and the remaining
surfaces are casehardened. Mounted on deluxe, highly figured and checkered walnut forearm and pistol grip stock. The
pistol grip has an ebony insert, and the crescent buttplate has a trapdoor (cleaning rod not included). This rifle is documented in
the included March 2003 Minnesota Weapons Collectors Association Official Publication, Volume 16, Issue 1 on pages 16-19 and comes
with much of noted collector Mike Stanton’s research that was referenced in the MWCA article. Born in Vienna, Austria, civil engineer William
de la Barre (1848/49-1936) was the fourth of twelve children, joined the Austrian Navy at age 16 but due to illness was quickly discharged
after 13 months of service and emigrated to America with his father, mother and 7 siblings (4 had died) where they eventually settled in
Philadelphia. De la Barre ran engines in a machine shop, brick factory, brewery and sheet iron works before being hired by Morris Trasker &
Co., a manufacturer of gas, steam and water pipes and machinery for sugar refineries and gas works, where his career flourished. In 1873,
he represented the City of Philadelphia at the International Exhibition held in Vienna and, upon his return from the Old Country, received
a flurry of demands for his services to develop gas works machinery and plants in numerous American cities. Eventually, he channeled
his talents towards the prevention of deadly flour dust mill explosions through the introduction and improvement of Behan’s millstone
exhaust system and the management of the milling industry in and around the Twin Cities area of Minnesota. He was instrumental in the
development of hydroelectric power for the Pillsbury-Washburn Flour Mills Company, Ltd. Simply put, de la Barre revolutionized Minnesota’s
milling industry. At the time of his death in 1936, he was lauded as “a recognized leader in the sciences of the flour milling industry” and “the
most useful figure in [the Twin Cities area] from the date of his arrival in the year 1878.”
William
de la Barre
PILLSBURY-WASHBURN FLOUR MILLS COMPANY

Presented to a Prominent Twin Cities Engineer Who Revolutionized Minnesota's Milling Industry
Much of the technology found in today’s milling
AS PICTURED AND DESCRIBED IN THE
industry can still trace its roots to the designs de
la Barre implemented in the 1880s. Mike Stanton MARCH 2003 ISSUE OF "MINNESOTA
acquired this rifle in the summer of 1988 and
WEAPONS COLLECTORS ASSOCIATION
unfortunately was unable to identify T.R. Butman OFFICIAL PUBLICATION, VOL. 16, ISSUE 1"
before his death in 2002. We, however, have found
a T.R. Butman (?-1909) who was the president of
boiler works at Butman Engineering Co. of Chicago, Illinois, and
inventor. His exact relationship to de la Barre, if any, remains
unknown at the time of this writing.
CONDITION: Very fine, with 85% original color casehardened
receiver and 98% original nitre polish blue remaining on the dust
cover. The loading gate retains 98% original nitre blue finish. The
remaining surfaces retain 95% plus vibrant original case colors.
The barrel and magazine tube retains 98% refinished blue finish.
The deluxe highly figured buttstock is also very fine with minor
handling marks, crisp checkering overall and most of the original
finish remaining. Mechanically excellent. This Model 1873 with
its presentation inscription to a distinguished civil engineer
would be difficult to replace and is worthy of most advanced
Winchester or antiquarian collections! A must have for the serious
Winchester collector!
Estimate: 9500 - 16000
25

Historically Significant New Haven Arms Company No. 2 Navy Pistol
The Dr. Gerald Klaz Collection
26
LOT 17
Exceptional New Haven Arms Company Lever Action No. 2 Navy Pistol - Serial no. 2815,
41 Volcanic cal., 8 inch bbl., blue/casehardened finish, varnished walnut grips. This Lever
Action No. 2 Navy pistol with eight-inch barrel was manufactured by the New Haven Arms
Company c. 1858 using a Volcanic Repeating Arms Company barrel. The pistol has a blued
barrel with integral ten-shot magazine, brass frame, casehardened hammer and fire blue T-bar
spring, rear sight, cartridge elevator, bolt and loading lever. The two piece walnut grips have a
high polish piano finish. The Type I, barrel has the full rib found on earlier Volcanic Repeating
Arms Company firearms. The barrel has a crowned muzzle, rounded T-bar spring and nickelsilver,
cone-shaped, front sight. The magazine has an iron, clam-shell shaped follower. The
distinctive brass frame has a dove-tail mounted, fixed, rear sight. The ejection port has a
small circular cut-out on the front face and a larger, circular, cut-out on the rear face. The
hammer has coarse knurling on the spur. The top barrel flat is roll-stamped: “REPEATING ARMS
COMPANY/PATENT NEW HAVEN CONN FEB.14. 1854” in two lines. Traces of the earlier “THE
VOLCANIC” markings are visible above the lower two lines. The serial number is stamped on
the right side of the butt beneath the grips, on the inside of both grips and on the right side
of the loading lever. All of the visible serial numbers match.
CONDITION: Excellent. This pistol is all original and shows only very limited handling and
storage wear. The barrel has 90% of the original blue finish. The legend on the top flat is crisp.
The exceptional receiver has a beautiful, untouched patina with perfect sideplate joints with
only slight handling marks. Significant amounts of the delicate fire blue finish are present on
the T-bar spring, cartridge elevator, bolt, rear sight and loading lever. The trigger and hammer
have 90% plus of the muted case colors. The grips are both in excellent overall condition
and retain 90% plus of the original piano finish. The only significant wear is some minor scuff
marks on the lower edge of the right grip. This is an exceptional example of a New Haven
Arms Company Lever Action No. 2 Navy pistol. It would be difficult to find a better example of
this scarce and historically significant pistol.
Provenance: Dr. Gerald Klaz collection.
Estimate: 25000 - 37500

An Ideal Investment Opportunity
The Dr. Gerald Klaz Collection
27

The Dr. Gerald Klaz Collection
SIMILAR EXAMPLE PICTURED AND
DESCRIBED IN THE BOOK VOLCANIC
FIREARMS BY LEWIS AND RUTTER
LOT 18
Exceptionally Rare and Desirable Volcanic Repeating
Arms Co. No. 2 Volcanic Cartridge Box - This exceptionally
rare box originally contained 200 No. 2 Volcanic cartridges (no
cartridges included). It is made of plain cardboard with a green
label on the lid with black text which reads: “200 No. 2/PISTOL
CARTRIDGES,/MANUFACTURED BY/The Volcanic Repeating
Arms Co.,/NEW HAVEN Conn.” followed by the standard warning
message and “Patented August 8th, 1854.” Similar box pictured
and described on page 48 of the book “Volcanic Firearms:
Predecessor to the Winchester Rifle” by Lewis and Rutter. The
book identifies the “very rare and possibly unique” ammo box
lid as having a decorative “Henry-like” border.
CONDITION: Very fine, showing only some minor wear/storage
evidence mostly around the edges and one area of repair along
a bottom edge. The label is complete and legible.
Provenance: Dr. Gerald Klaz collection.
Estimate: 6000 - 9000
28

Rare & FRESH Winchester “Inverted V” 1888 Cartridge Board
LOT 19
Rare Early Winchester Factory
Cartridge Display Bullet Board
- This is an early cartridge board
issued by Winchester (collectors
refer to it as the Model 1884). It
is the first to use what will later
become the “classic” design by
using green lithograph paper with
the bullet information in gold print
and the Winchester shells mounted
directly to the board. The cartridges are in an inverted “V” with cartridges
in an arch on each side, a circle of cartridges in the middle and shotgun
shells and six cap tins on the lower portion. The back side of the original
paper backing is correctly marked “COMPLIMENTS OF WINCHESTER
REPEATING ARMS CO./NEW HAVEN, CONN” in the center. The display
is mounted in a grooved wood frame with interior ornamental floral
border finished in gold. The display area dimensions are approximately
38 1/4 x 26 1/2 inches and the overall dimensions are approximately 46
1/4 x 35 inches. These early boards are seldom seen in any condition and
rarely offered for sale in such fine condition!
CONDITION: Fine overall, with some mild wear, mild fading, some
scattered minor spotting/staining, and a small hole towards the right
middle. The frame is also fine with minor handling/storage marks
scattered throughout, some light wear, and retaining most of the gold
on the ornamented border. Only a small piece of the cutaway paper
shotgun cartridge remains, otherwise all of the cartridges are present
and show mostly minimal wear. An extraordinary piece to take the
display of your Winchester collection to the next level!
Estimate: 40000 - 60000
29

BOTH SIDES PICTURED
The Corner Stone Collection
LOT 20
Winchester Deluxe Model 1886
Lever Action Rifle in .45-90 - Serial no. 73335, 45-90 WCF cal., 26 inch
octagon bbl., blue/casehardened finish, varnished highly figured checkered walnut
pistol grip stock. This Model 1886 Fancy Sporting Rifle was manufactured by the
Winchester Repeating Arms Co. c. 1891. This deluxe rifle has the very desirable
color casehardened receiver and deluxe, highly figured, fancy grade walnut
forearm and pistol grip stock with Winchester “Style H” checkering. The
stock has an ebony inlay on the pistol grip and crescent steel buttplate.
A special order sling swivel is mounted on the stock and an eyelet for a
detachable sling swivel is mounted on the forearm cap. Left side of tang
marked “373 XX”, buttstock inlet marked “373”, and replaced buttplate
marked “252”. The rifle has a 26-inch octagon barrel with full-length
magazine. The barrel has a dovetail mounted sporting front sight with
nickel-silver blade and buckhorn, sporting style, rear sight with serrated
edges and screw-adjustable center-piece. The upper receiver tang is
factory drilled and tapped. The top barrel flat is roll-stamped with the
two-line legend: “-MANUFACTURED BY THE-/-WINCHESTER REPEATING
ARMS CO. NEW HAVEN. CONN. U.S.A.” ahead of the rear sight. The
caliber: “45-90 W.C.F.” is roll-stamped on the top barrel flat between the
rear sight and the receiver. The upper receiver tang is roll-stamped: “-MODEL 1886-”. The 1884/1885 patent dates are roll-stamped on the lower tang behind the trigger, and the serial number
is roll-stamped in script numerals between the tang screws. The barrel and magazine tube have a blue finish. The bolt, loading gate, trigger and sling swivel are bright blue. The forearm cap,
receiver, hammer, lever and crescent buttplate are color casehardened. The fancy grade walnut stock and forearm have a high polish piano finish.
CONDITION: Fine. The barrel retains 70% of the blue finish with sharp markings. The magazine band shows light edge wear, and the blue on the lightly scratched magazine tube has a mottled
plum patina that shows dark pitting on the bottom forward portion. The bolt retains 95% of the bright blue finish. 80% of the bright blue finish is present on the loading gate. The trigger has
nearly all of the blue finish. The case colors on the receiver have faded to a mottled silver-gray; the receiver has 30% of the faded case colors with stronger colors on the right side. The forearm cap
retains 70% of the original case colors. Most of the case colors are present on the hammer, and the lever has 50% of the case colors. The crescent buttplate retains 30% of the silvered case colors. The
fancy grade walnut stock and forearm are in excellent condition and retain most of the high gloss piano finish. Wear is limited to a few scattered and very insignificant handling marks. The checkered
panels on the stock and forearm are in very fine-excellent condition; wear is limited to two small bruises and some light scratches on the left side of the stock wrist. This is a fine example of a desirable
Winchester Deluxe Model 1886 Fancy Sporting Rifle with color casehardened receiver and checkered, fancy grade forearm and pistol grip stock.
Provenance: The Corner Stone Collection.
Estimate: 8000 - 14000
BOTH SIDES PICTURED
30
LOT 21
Winchester Model 1892 Lever Action Saddle Ring Carbine - Serial no. 968535, 25-20 WCF cal., 20 inch round bbl., blue finish, walnut stock.
Winchester Model 1892 Carbine manufactured in 1925. The carbine has a 20-inch round barrel chambered for the .25-20 W.C.F. cartridge, full length
magazine and staple mounted saddle ring on the left side of the receiver. The barrel has a blued steel front sight on a steel block
base and a folding leaf rear sight graduated to 200 yards (“20”). The upper receiver tang is factory drilled and tapped. The
carbine has a full blue finish. The straight grain American walnut stock and forearm are oil finished. The left side of the barrel
is roll-stamped: “-MODEL 92-WINCHESTER- 25-20W.C.F.-/-TRADE MARK-” in two lines below the rear sight. The opposite side of
the barrel is roll-stamped: “MADE IN U.S.A WINCHESTER REPEATING ARMS CO./-NEW HAVEN. CONN,-” in two lines. The upper
receiver tang is roll-stamped: “ WINCHESTER/TRADE MARK/MADE IN U.S.A.” The oval Winchester “W/P” proofmark is stamped on
the top of the barrel and receiver. The serial number is stamped across the bottom of the receiver.
CONDITION: Very fine. The carbine is all original and retains 85% of the blue finish overall. 95% of the original blue is present on
the barrel and magazine. The barrel band has half of the original blue finish remaining. The receiver retains 75% of the original
finish with flaking of the blue visible on the bottom and edges and some scattered age discoloration. The left side of the receiver has the usual scuff marks caused by
contact with the saddle ring. The hammer and trigger retain nearly all of the blue finish, and the lever has some scattered edge wear. The buttplate has the usual contact
wear and retains 70% of the blue finish. The barrel and receiver markings are crisp. The stock and forearm are both excellent with minimal handling wear and retain nearly
all of the original oil finish. This is a fine looking original example of a Winchester Model 1892 Saddle Ring Carbine.
Estimate: 3750 - 5500

LOT 22
Rare and Desirable Factory Engraved, Full Nickel Plate Special
Order Winchester Model 1866 Lever Action Saddle Ring Carbine -
Serial no. 77012, 44 RF cal., 20 inch round bbl., nickel finish, walnut stock.
Manufactured in 1871. The lower tang is stamped with the serial number
and “IC” a factory designation code for special engraving and plating . The
receiver features a profuse foliate scrollwork on a punch dot background
along with ornate inscription panels in the Ulrich style on both side plates
and front flats, and simple border patterns. The buttplate tang is engraved to
match. The top of the barrel is marked with the two-line New Haven address/
King’s Improvement patent dates. The carbine also has the distinctive brass
receiver, round barrel with full length magazine, barrel band with integral
front sight, two leaf rear sight, saddle ring and staple on the left side of
the frame, full nickel plating, and walnut stock with sling swivel filler and
crescent brass buttplate with compartment (cleaning rod not included).
CONDITION: Very good. The barrel, barrel bands and magazine tube retain
60% of the original nickel plating with the balance a mottled gray patina.
The frame retains 90% of the nickel plating. The remaining surfaces retain
30% of the nickel plating. The engraving is crisp. The wood shows an old
coat of applied protective varnish done some time ago with several repairs
on both the forearm and stock and some scattered minor handling marks.
Mechanically excellent. A very rare configuration and often a hole in even the
most advanced Winchester collections.
Estimate: 8000 - 14000
31

Incredibly Rare, Factory Engraved Ultra Special Order Winchester Model 1873 Deluxe Carbine
LOT 23
Extremely Rare Documented
Special Order Factory Moorish Pattern
Engraved Winchester Deluxe Model
1873 Lever Action Carbine with Extra
Length Barrel and Factory Letter - Serial no.
281098B, 44-40 WCF cal., 26 inch round bbl., nickel finish,
highly figured walnut stock. Manufactured in 1888 as a third model with a dust cover guide
rail integral to the top of the receiver and dust cover featuring serrated finger grip on the rear.
The accompanying factory letter lists this extremely rare special order carbine with a 26 inch barrel
in .44 caliber, nickel plating, half magazine (7 cartridges), $25.00 engraving, “Moorish P steel scabbard” (not
included), no rod in the buttstock compartment and angular bayonet (not included) when it was received in the
warehouse on October 19, 1888 and shipped on October 26. A similar engraving on a Model 1873 musket is pictured
and identified in George Madis’ “The Winchester Book.” Madis identified the engraving as the following: “This pattern of
engraving is definitely Moorish, with geometric and scroll designs. One of the most intricate and involved patterns of
engraving, copied from a Moorish design by the Winchester engravers” (page 138). The engraving is profusely featured on
the receiver with flourishes of scrollwork on the barrel at the breech, hammer, dust cover, lever and buttplate tang. The
Moorish engraving alone puts this Model 1873 in special class of Winchester rarities, but when the “very unusual pattern
engraving” combines with other special order features (extra length barrel in 26 inches, full nickel plating, deluxe stock
and half magazine), this carbine is in a class of its own! Any non-standard barrel length on a Winchester is considered rare,
and Madis calculated that “one of each 600 [Model 1873s] had [a] barrel longer than standard.” Madis continued, “Rifles in
the 1873 model outnumber carbines by 20%, and only one of each 600 guns had plating. Only one of each 700 guns had
engraving or inscriptions, and one of each 600 had special wood. These figures would be for all of the Model 73s produced.
32

As They Say, "Find Another One"
For carbines only, the ratios would be much higher.” You are most certainly
looking at an extremely rare Model 1873! The barrel is stamped with the twoline
address/patent dates marking and is fitted with a block mounted iron front
sight that serves as a lug for a socket bayonet and a folding ladder rear sight
marked “1873” and graduated from 2 to 9. The cartridge elevator is marked “44
CAL.” A saddle ring is mounted on the left side of the receiver. British proofs
are present. The forearm and straight grip stock are highly figured deluxe
walnut with checkering only on the stock wrist. The left side of the lower tang
is marked “2245 XXX C.” The assembly number “2245” is repeated on the stock
inlet. The buttplate has the assembly number “3345” (possibly a factory error).
Winchester’s business ties to Morocco originated in 1885 when, as explained
by author and Winchester family descendant Laura Trevelyan, “the Sultan
of Morocco ordered 1,000 Model 1873 muskets and a million cartridges. A
delegation of Moorish gunsmiths from Morocco visited New Haven to watch
the manufacture of their muskets, and learn about maintenance and repair.
Their visit caused much consternation among the little-traveled citizens of
New Haven, who objected to the Moroccans cooking food on open fires while
wearing long flowing robes.” Cultural clashes aside, the factory Moorish pattern
engraving on this carbine represents a time when the Winchester name was
steadily becoming internationally known.
CONDITION: Fine, retaining 95% of the period replated nickel finish with loss
contained to the lever and buttplate. The engraving is generally crisp. The
revarnished wood is very good with some minor dings and scratches and
smooth checkering. Mechanically excellent. Here is your chance to acquire a
true rarity in 19th century firearms collecting, a special order factory Moorish
pattern engraved Winchester deluxe carbine with extra length barrel, that is
surely missing from even the most advanced public or private collections!
Estimate: 12000 - 18000
33

LOT 24
Historically Significant “Africa 1909” Inscribed Winchester
Deluxe Model 1886 Takedown Lever Action .45-90 Rifle Reportedly
Made for Theodore Roosevelt’s Famed 1909 African Safari with R.
L. Wilson Letter - Serial no. 147840A, 45-90 cal., 26 inch round bbl., blue
finish, highly figured checkered walnut pistol grip stock. This is a very fine
example of a Winchester Model 1886 Fancy Sporting Rifle manufactured
in 1909 in .45-90 W.C.F. caliber. The top of the barrel is marked with the
two line address/patent dates ahead of the rear sight and “45-90 W.C.F.” at
the breech end. The upper tang is marked “MODEL 1886/-WINCHESTER-/
TRADE MARK”. The lower tang is marked with the 1884 and 1885 patent
dates directly behind the trigger and the serial number to the rear. The
upper right side of the receiver is period inscribed “Africa 1909”. The barrel
is equipped with a Lyman blade front sight with bead and two folding
leaf Lyman rear sight. There is a Lyman peep sight mounted on the left
side of the receiver. Half magazine tube, blue finish with casehardened
hammer and lever, and mounted with deluxe, nicely figured checkered
walnut forearm with metal end cap and pistol grip stock with a hard
rubber Winchester grip cap and checkered hard rubber Winchester
buttplate. This rifle was carefully examined by noted firearms historian R.L.
Wilson. In his accompanying letter Wilson concluded that this rifle “was
manufactured by Winchester Repeating Arms Co. as a sample for testing
by Theodore Roosevelt and his son Kermit in preparation for their great
African safari, 1909-10. With numerous features that were of proven and
known popularity with Theodore Roosevelt in his selection of Winchesters
made to his order from models as early as the 1873 to the Model 1895. A
few of which accompanied TR and his son Kermit on their great African
safari in 1909-10.” As the author of three books on TR’s adventures in
Africa, Wilson established himself as an expert on Winchesters used in
TR’s African safaris. Months of preparation leading up to Roosevelt’s
1909-10 safari included testing rifles and ammunition as well as directly
communicating with Winchester on the type of arms and cartridges best
suited for the hunt. Wilson explained, “It was TR’s practice to add new
Winchester to his battery of arms as improved models were introduced…
The writer feels that the ‘African 1909’ Model 1886 was not only inspired
by the quite extraordinary Roosevelt expedition, but that it was likely
prepared at the gunmaker’s own expense, as an example of a special
pattern of rifle which they would be willing to manufacture.” This rifle is
without a doubt configured to TR’s own personal preferences. As noted
by Wilson, a Model 1886 in .45-90 (serial number 9205) was TR’s primary
sporting rifle from 1887 until 1894 and the half magazine, caliber, deluxe
pistol grip stock and shotgun buttplate are features that
are shared with this Model 1886. We also know that correspondence
between then the vice president of Winchester Repeating Arms Co.
Winchester Bennett, and TR’s most trusted White House Aide William
Loeb documents Winchester’s extensive assistance and collaboration in
the 1909-10 safari. In an August 10th dated letter, for example, Bennet
referenced a .45-70 sample rifle made specifically for TR and recognized
TR’s “attachment to the 1886 .45-70 rifle, and the confidence which you
feel therein. Certainly for zebra, the smaller antelope, and much other
African game, this arm out to be sufficient.” In the end, Roosevelt decided
not to bring a .45-90 rifle to Africa, but, as Wilson noted, “the important
fact is that he had certainly considered that caliber,” as confirmed by the
aforementioned letter. A Model 1886 was selected for the trip but was
chambered in .45-70. As Wilson finally concluded, “Having reviewed all of
the research and writing of myself and others, the inescapable conclusion
is that Serial No. 147840 was prepared by Winchester as a sample of a
special rifle which would fit within the exacting parameters of TR’s choices
for the great safari…[The rifle] represents not only the great safari of the
Roosevelts, but the intense preparation that was necessary to make their
11-month expedition the enormous success father and son hand hoped
and dreamed it to be. Without the cooperation of Winchester, the saga of
that adventure would not have reached its potential.” The famed 1909-10
African hunting expedition was outfitted by the Smithsonian Institution
and commenced shortly after the end of TR’s presidency in March 1909,
returning in June 1910. The hunt also involved professional hunters such
as Frederick Selous, Edward Buxton, R.J. Cuninghame and Leslie Tarlton.
As one modern day commentator put it, “Essentially this was the biggest,
most macho and testosterone-laden hunting junket on Earth.” About
11,400 animals, ranging from insects to elephants, were captured or killed,
including 512 big game animals. It
took the Smithsonian eight years
to catalog the specimens. The safari
was documented by Roosevelt in
his book “African Game Trails” and
helped to solidify Roosevelt’s image
as the quintessential adventurer and
outdoorsman in popular culture.
CONDITION: Very fine. The barrel and
magazine retain 90% plus original
blue finish with some thinning at the muzzle,
and a few minor scratches and handling marks. The
receiver retains 50% of the original blue finish with a smooth
gray patina on the bottom and smooth brown on the sides. The lever
and hammer retain 50% original case colors concentrated on the sides
with a smooth mottled gray patina on the balance. The wood is also very
fine with most of the original finish remaining and some overall scattered
minor dings and dents, with crisp checkering. The markings remain crisp
and clear. The action is excellent.
Estimate: 15000 - 25000
35

BOTH SIDES PICTURED
The John Fox Collection
LOT 25
Documented Antique Winchester Model 1886 Extra Lightweight Takedown
Short Rifle with Factory Letter - Serial no. 118343, 45/70 cal., 22 inch round bbl.,
blue finish, walnut stock. The included factory letter confirms the rifle was received
and shipped on September 23, 1898, as part of order 6666 and confirms it shipped in the current
caliber with an extra light 22 inch barrel, half magazine, plain trigger, takedown configuration,
shotgun butt, and plain rubber buttplate. The rifle has a standard Lyman ramp front sight with white bead
and buckhorn sporting style, rear sight with screw adjustable center insert. The barrel, magazine, forearm cap, bolt and
receiver have the Winchester high polish blue finish. The hammer and loading lever are color casehardened. The loading gate is niter blue. The checkered hard rubber buttplate is embossed
with the Winchester logo. The top of the barrel is roll-stamped with the legend: “-MANUFACTURED BY THE-/WINCHESTER REPEATING ARMS CO. NEW HAVEN. CONN. U.S.A.” in two lines ahead
of the rear sight. “45-70,” the Winchester oval “W/P” proofmark meaning it was returned to the factory after 1905, and “N.S” are stamped on the top of the barrel between the rear sight and the
receiver. The upper receiver tang is drilled and tapped for a peep sight and is roll-stamped: “-MODEL 1886.” The 1884 and 1885 patent dates are stamped in two lines on the lower tang behind the
trigger. The serial number is stamped in script behind the rear tang screw.
CONDITION: Fine. The rifle retains 85% plus of the original blue and casehardened finish. With slightly thinning down the length of the barrel and limited circular scratches on the underside of the barrel
just in front of the magazine. The takedown collar shows normal handling wear and a thinning blue finish. The bolt and receiver retain 85% of the original high polish blue finish with light high point wear and a few
minor scratches. The niter blue loading gate has high point wear but retains 50% of the original nitre blue finish. The hammer retains 80% of the its case colors. Contact points on the loading lever have a silver patina. The shortened
refinished buttstock is in very good condition. The forearm is fine. All of the markings are crisp. This is a solid representative example of a .45/70 Winchester Model 1886 Extra Lightweight Takedown Rifle.
Estimate: 5500 - 8500
BOTH SIDES PICTURED
LOT 26
Winchester Model
1895 Lever Action Takedown Rifle in Desirable .405 W.C.F. with
Canvas Sleeve - Serial no. 78211B, 405 WCF cal., 24 inch round bbl., blue finish, walnut stock.
Manufactured 1915. The barrel has the two-line nickel steel marking and “405 W.C.F.” on the
upper left. Winchester factory oval proofs are on the barrel and receiver at the breech. The receiver is marked with the two-line
Winchester address/patent on the left, three-line trademark on the upper tang, serial number on the lower tang, and has a matted section
on the top of the receiver ring. It is fitted with raised dovetailed Lyman beaded blade front, replacement Sheard three-leaf (one a folding ladder)
rear, and receiver mounted Lyman peep sights. Mounted with a smooth schnabel tip forearm with ebony insert and a straight grip stock with added swivel eyelet base and
fitted with a factory checkered steel shotgun buttplate. Includes a tan canvas takedown carry-case with leather straps and reinforced areas.
CONDITION: Very good, retains 30% original blue finish with the balance, primarily on the receiver, lever and buttplate, showing a mixture of brown and grey patinas. There are some tool type marks and
battering visible on the right side of the takedown collar. The wood is also very good with some scattered minor dings and scratches and some visible mild handling wear in the varnish on the forearm.
Mechanically excellent. The case is good with some moderate wear and an absent buckle.
Estimate: 2500 - 3750
36
LOT 27
Exceptional Winchester Model 1892 Lever Action Saddle Ring Carbine in .44 W.C.F.
- Serial no. 992914, 44 WCF cal., 20 inch round bbl., blue finish, walnut
stock. Manufactured in 1928. Standard markings including Winchester
factory oval proofs on the barrel and receiver at the breech. Fitted with pinned
blade front and folding ladder rear sights, and a saddle ring on the left of the receiver. Mounted with a
smooth forearm and straight grip stock with a carbine buttplate.
CONDITION: Exceptionally fine, retains 90% plus bright original blue finish with a few patches of smooth
brown patina on the receiver and buttplate, and some light saddle ring wear. The wood is excellent with
some scattered light dings and scratches. Mechanically excellent.
Estimate: 3500 - 5500

Investment Class Winchester First Model 1866 "Flatside" Rifle - For the Discerning Collector
LOT 28
Exceptional and Extremely Rare First Model
Winchester 1866 “Flatside” Lever Action Rifle -
Serial no. 14987, 44 RF cal., 24 inch octagon bbl., blue
finish, varnished highly figured walnut stock. First
Model 1866 Winchester rifles and carbines fall in the
12000-15500 serial number range and are directly
commingled within New Haven Arms Company Henry
rifle’s production serial range, which is purported to
be approximately 15,000. Very little is known about
the late serial number blocks of Henry rifles and
many believe the actual production figures are more
like 12,000 but were serialized in batches or “blocks”.
The theory is substantiated by reported, known
numbers, and large chunks of the number block are
still unaccounted for today, particularly in the later
series. According to Les Quick’s book “The Henry
Rifle”, the highest reported serial number of a Henry
rifle is 14,312, which is 675 apart from this first model
1866 rifle. The highest serialized Henry rifle this writer
could find was number 14,338 sold by our firm, Rock
Island Auction Company, in September 2015 as lot 17.
Likewise, very little information is known about these
early first model 1866 rifles. The earliest according to
author George Madis in “The Winchester Book” and
confirmed by Winchester dates of manufacture bears
the serial number 12476. The lowest flatside this writer
could find published is a carbine, serial number 12979,
38

Extremely Early Production 1866 Rifle with Attractive, Highly Figured Walnut Stock
sold by our firm, Rock Island Auction Company, in December of 2015
as lot number 1013. The lowest known flatside rifle this writer could
find published is serial number 13821, also sold by our firm in May
2019 as lot 3010. Furthermore, of the twelve flatside 1866s (carbine or
rifle) we have sold, only two were rifles, all had a channeled loading
gates and saddle rings. Original examples of the First Model 1866
Winchester are rare and extremely desirable. This Winchester First
Model 1866 lever action rifle was manufactured at the beginning of
1867. This rifle has the rare first style “flatside” receiver with two upper
tang screws, Henry buttplate with hinged trap door and 24-inch,
non-tapered, octagon barrel. The top barrel flat is roll-stamped with
the first style legend: “HENRY’S PATENT-OCT.16. 1860/ KING’S-PATENT-
MARCH 29. 1866” in two lines ahead of the rear sight. The barrel
has a dove-tail mounted iron front sight blade and Henry folding
leaf rear sight with 900 yard center notch, square end elevator bar
and elevator bar stop screw. The magazine has the first style, screw
fastened band. The distinctive, un-capped forearm is secured by
a single screw. The left side of the receiver is fitted with a staplefastened
saddle ring. The right side of the receiver has a loading gate
with indented cover. The hammer has borderless knurling. The butt
trap contains a four-piece, jointed, steel cleaning rod with brass tip.
The left side of the lower receiver tang is stamped with the serial
number and a small assembly number “1647”. The serial number is
also stamped in the upper tang inlet of the stock and on the inside
of the buttplate toe. All of the visible serial numbers match. The
barrel and magazine are blued, the hammer, lever and trigger are
casehardened, and the receiver and crescent buttplate have the
natural brass finish. The loading gate is niter blue. The original stock
and forearm are highly figured, deluxe quality burl walnut with a
varnished piano finish.
NOTICE THE SADDLE RING,
THIS FEATURE OCCURS MORE
OFTEN ON FIRST MODEL
RIFLES THAN WITH ANY OF
THE LATER 1866 RIFLES
CONDITION: Exceptionally fine overall. The barrel
has 60% of the original deep blue finish. The
magazine tube blue has slightly faded to a plumcolored
patina. The barrel legend is crisp. The
loading gate has 50% plus of the original nitre
blue finish. The hammer, lever and trigger retain
40% of the silvered case colors. The brass receiver
and buttplate are excellent with a very attractive,
untouched patina. The receiver side-plate joints
are nearly perfect. The receiver and buttplate
show only very insignificant handling wear. The
well-figured burl walnut stock and forearm remain
in exceptionally fine condition and retain 85%
of the original piano finish varnish with a few
scattered and very insignificant handling marks.
This is a truly exceptional and extremely rare First
Winchester Model 1866 “flatside” lever action rifle,
no doubt a “hole” in even the most
advanced collections.
Estimate: 60000 - 90000
39

Stunning Special Order Winchester Deluxe Model 1886 Fancy Sporting Rifle
The Robert M. Lee Collection
40
LOT 29
Outstanding Special Order Winchester Deluxe Model
1886 Fancy Sporting Lever Action Rifle with Attractive
Casehardened Receiver and Factory Letter - Serial no. 57475, 45-70
cal., 26 inch bbl., blue/casehardened finish, walnut checkered stock.
This Special order Winchester Model 1886 Fancy Sporting Rifle was
manufactured in 1891. This rifle is accompanied by a factory letter that
describes this rifle as: “Type: Rifle, Caliber: 45/70, Barrel Type: Octagon,
Trigger: Plain, Checkered stock, Pistol grip, 1/2 Magazine” and “Shotgun
butt”. Removal of the stock proves that the latter is a clerical error as the
left side of the lower tang is marked “99 XXX” and the assembly number
“99” is repeated in the stock inlet and on the crescent steel buttplate. The
letter further states that the serial number was applied to this rifle on June
17, 1891 and that the rifle was shipped from the Winchester warehouse on
June 24, 1891. Although the factory letter states that this rifle was shipped
from Winchester with a shotgun style buttplate it is fitted with a crescent
steel buttplate. The full octagon barrel and half-magazine have a blue
finish. The bolt and loading gate are bright blue. The forearm cap, receiver,
hammer, lever and crescent buttplate are color casehardened with fiery
case colors. The forearm and pistol grip stock are highly figured, fancy
grade walnut with Winchester “Style H” checkering and a high gloss piano
finish. The bottom of the pistol grip has an ebony inlay. The barrel has a
dove-tail mounted Lyman “Hunting Front” sight with insert and adjustable
folding leaf rear sight graduated to “10” and marked “1886” at the top of
the leaf. The upper receiver tang is factory drilled and tapped. The top
barrel flat is roll-stamped with the two-line legend: “-MANUFACTURED
BY THE-/-WINCHESTER REPEATING ARMS CO. NEW HAVEN. CONN.U.S.A.-”
ahead of the rear sight. The caliber “45-70” is roll-stamped on the top barrel
flat just ahead of the receiver. The upper receiver tang is roll-stamped:
“-MODEL 1886-”. The 1884 and 1885 patent dates are roll-stamped on the
lower tang behind the trigger and the serial number is stamped on the
lower tang between the
tang screws.
CONDITION: Excellent plus.
The rifle is all original and
remains in truly exceptional
condition with 98% of the
blue and color casehardened
finish. Although the Cody
Record Office letter indicates
that this rifle was shipped with a
shotgun style buttplate, the stock
and buttplate are original to the rifle
and the Cody description is an error in
the letter or in the original Winchester records.
The barrel and half-magazine retain nearly all of the original blue finish.
The bright blue finish on the bolt, loading gate and trigger shows almost
no wear. The receiver, forearm cap and lever have fiery case colors that
show almost no wear. The hammer has 97% of the case colors with some
cycling wear on the left side. The case colors on the buttplate have faded
slightly but are 95% intact with traces of finish loss on the edge of the heel
and some minor pitting on the buttplate toe. The markings on the barrel
and receiver are perfect. The stock and forearm retain 97% of the original
piano finish with some scattered and very insignificant handling and
storage marks on the sides of the stock and rear portions of the forearm.
The checkering on the pistol grip and forearm is sharp and shows minimal
handling wear. This is a stunning example of a deluxe, special order,
Winchester Model 1886 Fancy Sporting Rifle.
Provenance: The Robert M. Lee Collection.
Estimate: 35000 - 55000

NOTICE THE LOWER TANG,
STOCK, & CRESCENT STEEL
BUTTPLATE ALL HAVE
MATCHING ASSEMBLY
NUMBERS
The Robert M. Lee Collection
41

Excellent Investment Quality Winchester 1873 Saddle Ring Carbine
LOT 30
Outstanding Winchester Third Model 1873 Lever Action Saddle
Ring Carbine - Serial no. 626547B, 44 WCF cal., 20 inch round bbl., blue/
casehardened finish, walnut stock. Manufactured in 1908. The carbine has the
Third Model receiver with integral dust cover rail and dust cover with serrated
finger guides. The barrel has the second style upper barrel band with steel
block front sight and folding leaf rear sight. The carbine style buttplate has a
sliding brass trapdoor, and the butt trap contains a three-piece,
jointed steel cleaning rod. The barrel, magazine,
barrel bands, receiver and dust cover are blued, and
the hammer, lever, trigger and buttplate are color
casehardened. The loading gate has a fire blue finish.
The stock and forearm are oil-finished American
walnut. The top of the barrel is roll-stamped with
the legend: “WINCHESTER’S REPEATING ARMS.
NEW HAVEN. CT./KING’S IMPROVEMENT PATENTED
MARCH 29, 1866. OCTOBER 16. 1860.” in two lines
ahead of the rear sight. The caliber designation
“44 W.C.F.” is roll-stamped on the top of the barrel
between the rear sight and the receiver. Winchester
oval “W/P” proofmarks are stamped on the top
of the barrel just ahead of the rear sight and on the top of the receiver. “44
CAL” is stamped in script across the bottom of the brass cartridge elevator.
The upper tang is factory drilled and tapped and roll-stamped “MODEL
1873/-WINCHESTER-/TRADE MARK” in three lines.
CONDITION: Excellent. This carbine is all original and retains 95% plus of the
original blue and color casehardened finish overall. Nearly 98% of the blue
finish is present on the barrel, magazine and barrel bands. The receiver retains
nearly 90% of the blue finish. Wear is limited to several very small spots of age
discoloration on the lower receiver and a few very light handling marks. The
loading gate retains 98% of the nitre blue finish. The hammer, trigger, lever and
buttplate have most of the muted case colors. The barrel, elevator and receiver
markings are sharp. The stock and forearm are in very good condition with
scattered minor handling marks. The right side of the stock wrist and forearm
show some light finish wear. Winchester Model 1873 carbines typically saw
hard use, and examples like this one in excellent condition are scarce and rarely
offered for sale.
Estimate: 12000 - 18000
43

LOT 31
Excellent Winchester Model 1890 Slide
Action Rifle in Desirable .22 WRF - Serial no. 588263, 22 WRF cal., 24 inch octagon bbl., blue
finish, walnut stock. Manufactured in 1917. Beaded blade front and elevation adjustable sporting notch rear
sights, standard barrel markings, Winchester “WP” proofs on the barrel and receiver at the breech, “22 W.R.F.” on the upper left
flat at the breech, matching numbers on the receiver and lower tang, and adjustable, flip up rear peep sight mounted on the upper tang. Twelve
groove, short slide handle and smooth straight grip stock with blue steel crescent buttplate.
CONDITION: Excellent with 90% plus bright original blue finish, areas of flaking on the magazine tube, cycling marks, scattered scratches, and white paint collector type mark on
the inside of the trigger guard. The wood is also excellent with small dings and scratches, most of the original varnish finish, and some surface oxidation on the buttplate heel.
Mechanically excellent.
Estimate: 3000 - 4500
LOT 32
Excellent Round Barrel Variant Winchester Model 90 Slide Action Rifle in Very Scarce .22 Long
Rifle - Serial no. 827179, 22 LR cal., 23 inch round bbl., blue finish, walnut stock. Beaded blade front and
elevation adjustable sporting notch rear sights on the late style round barrel, standard barrel markings, Winchester
“WP” proofs on the barrel and receiver at the breech, checkered hammer spur, matching numbers on the receiver and lower tang, and
standard markings on the upper tang. Short twelve groove slide handle and smooth straight grip stock with blue steel crescent buttplate.
CONDITION: Excellent with 95% original blue finish, some surface oxidation on much of the breechblock and some light cycling marks visible on the magazine
tube. The wood is also excellent with some small dings and scratches, and a mixed blue/brown finish on the buttplate. Mechanically excellent.
Estimate: 3000 - 4500
LOT 33
Antique First Year Production Two Digit Serial Number 37 Winchester
Model 1890 Slide Action Rifle - Serial no. 37, 22 RF Short cal., 24 3/8 inch octagon bbl., blue/casehardened
finish, walnut stock. Dovetail blade front and fixed notch rear sights, correct first style barrel inscription, “22 SHORT”
caliber marking on the top flat at the breech, casehardened solid frame receiver, correct first style notched breech bolt, smooth
trigger, and checkered hammer spur, standard three-line maker, model, and patent marking on the upper tang, tang mounted adjustable rear
peep sight, and unique one-line lower tang “JUNE 26,1888” patent marking. Short, twelve groove slide handle and smooth
straight grip stock with crescent buttplate.
CONDITION: Fair. The barrel and magazine tube have aged to a mostly uniform brown patina with well defined markings, some marring around the
rear sight dovetail and rear magazine tube ring, light edge wear, and small nicks and dings throughout. The receiver has an artificial dark gray patina on
bottom of frame with re-stamped serial number. Shadows of original case colors, a number of small dings visible on the right side, and mostly brown
patina on the balance. The refinished wood is also very good with small dings and dents, and gray patina on the buttplate. Mechanically excellent.
Estimate: 2500 - 4000
SERIAL NUMBER 37
LOT 34
Winchester Deluxe Model 1890 Slide Action Rifle - Serial no. 340841A, 22 L cal., 24 inch round bbl.,
blue finish, highly figured checkered walnut pistol grip stock. Receiver manufactured in 1907. Beaded blade front and elevation adjustable sporting notch rear sights, sixth style
barrel marking with the “1911” patent date, early style magazine tube without reinforcing collar (1911 patent noted in barrel marking), Winchester “WP” proofs on top of barrel and
receiver at the breech, and “22 LONG” on the upper left flat at the breech. Standard takedown receiver with checkered hammer and smooth trigger, two-line Winchester trademark on the upper
tang, and matching serial numbers on the receiver and lower tang. Short, twelve groove slide handle and fancy figured, checkered pistol grip stock with hard rubber Winchester grip cap, and blue steel
crescent buttplate. The left side of the upper tang is marked “7689 X 642” and the end of the buttstock is marked with the matching “7689” assembly number and matching “642” in the upper tang inlet.
CONDITION: Very good. Strong traces of blue with the balance fading to a brown patina, areas of high point and edge wear, small dings and scratches throughout, and some rough spotting. The receiver is a mottled
gray patina overall with small scratches and dings. The wood is also very good with numerous small dings and scratches overall, moderately worn checkering, period freshened varnish, and dark patina on the buttplate.
Mechanically excellent.
Estimate: 2500 - 3750
44
LOT 35
Winchester Model 90 Slide Action
Rifle with Case - Serial no. 105195, 22 LR cal., 24 inch octagon bbl., blue finish, walnut stock. Receiver manufactured in 1901 and subsequently returned to the factory, most likely in the 1930s.
The octagon barrel features a beaded blade front sight, filler block in the rear sight dovetail, tenth style barrel inscription (adopted in 1923), Winchester “WP” proofs on the barrel and receiver at
the breech, magazine tube with 1911 patent reinforcing collar, Third Model receiver with exposed locking lugs, Lyman flip up peep sight on the upper tang, matching serial numbers on the receiver
and lower tang, and standard markings on the upper. Fitted pre-war model 62, 10 groove, round slide handle and straight grip stock with blue steel checkered buttplate. Includes a green painted custom hardwood travel case with
Western Champion Club 1956 patch, four boxes of Western Xpert .22 LR ammunition, wood handled brass bore rod, and Hoppes solvent, patches, and gun oil.
CONDITION: Exceptionally fine as factory upgraded to current configuration with 97% of the bright factory blue finish remaining, some scattered scratches visible on the top barrel flat, and a few small nicks and dings. The wood is
also very fine with attractive grain and some small visible dings. Mechanically excellent. Case is fine with some exterior storage marks.
Estimate: 2000 - 3000

Phenomenal, Fresh & Incredibly Rare UMC Cartridge Board
LOT 36
Exceptionally Rare Union Metallic Cartridge Company
Glass Topped Cartridge Display Board - The interior
frame measures 20 13/16 wide by 32 3/8 tall inches with
the exterior measuring 25 3/8 wide by 37 1/8 inches
tall and the display is approximately 4 1/4 inches deep.
This impressive board includes an assortment of rimfire
cartridges, centerfire cartridges, and shotgun shells
ranging from the tiny BB cap up to the massive 1 inch
Berdan Gatling. All of the cartridges are neatly arranged in
rows and labeled in gold on a dark navy blue background.
“AMMUNITION/MANUFACTURED BY THE/UNION METALLIC
CARTRIDGE COMPANY,/BRIDGEPORT, CONN., U.S.A.” is
arranged in four lines at the top with a U.M.C. monogram
logo to either side, also in gold. The frame has two black
accents that run around the perimeter and a pain of glass
protecting the entire display. This is an exceptionally
rare cartridge display with very few examples left known
to exist, one being in the Smithsonian and one at the
Springfield Armory Museum. It is possible that this is the
only example known to exist with the navy blue
paper background.
CONDITION: Extremely fine overall, the display itself
shows very minimal wear and very little fading with some
scattered light handling/storage marks. The frame has mild
wear, light dings and scratches scattered throughout, and
the metal brackets holding the glass showing some mild
oxidation/patina. An exceptionally rare cartridge display
that would not only enhance your collection, but become
a centerpiece!
Estimate: 30000 - 50000
“This is an exceptionally rare
cartridge display with very few
examples left known to exist,
one being in the Smithsonian
and one at the Springfield
Armory Museum. It is possible
that this is the only example
known to exist with the navy
blue paper background.”
45

Magnificent Exhibition Quality Game Scene Engraved & Gold Inlaid Winchester Model 1876 Rifle
46
LOT 37
Exhibition Quality Game Scene
Engraved and Gold Inlaid Winchester
Deluxe Model 1876 Lever Action Rifle - Serial
no. 10046, 45-75 cal., 28 inch octagon bbl., blue finish,
walnut stock. Manufactured in 1880 as a second model
with a dust cover guide rail attached to the receiver
with two screws and subsequently custom embellished
to exhibition quality. The accompanying factory letter
addressed to big game hunter Jim Wilkinson lists this
rifle with an octagon barrel, plain trigger, checkered
pistol grip stock and globe and graduated peep sights
when it was received in the warehouse on October 19,
1880 and shipped the same day. The exquisite modern
embellishment features profuse floral scrollwork, gold
wire inlays, and silver and gold inlaid game scenes. The
receiver features a gold busts of a white tailed deer on
the left side and a cow moose on the right side. The
sideplates are adorned with highly detailed and inlaid
woodland scenes that depict two silver inlaid dogs
fighting a gold inlaid bear on the left and a gold inlaid
bull moose on the right. The barrel is equipped with a
dovetail blade front sight and an elevation adjustable
rear sight, has the two-line address patent dates
marking stamped
ahead of the rear sight
and scrollwork and double inlaid
bands at the breech and muzzle. The
cartridge block, magazine band and forend cap
are fully scroll engraved. Additional scrollwork and
gold wire inlay are featured on the dust cover, hammer
and lever. The upper tang is stamped “MODEL 1876.”
Sling swivels are attached to the underside of the forend
cap and buttstock. The highly figured walnut forearm
and pistol grip stock feature multi-point checkering.
The buttstock is fitted with a nickel plated trapdoor
buttplate. Comes with a five piece cleaning rod.
Formerly of the Jim Wilkinson Rifle Ranch Collection.

Big game hunter Wilkinson (1913-2001) was the original owner of Rifle Ranch, a sporting goods store in Prescott, Arizona, that specialized
in high end custom rifles, and was the tenth person in the world to achieve the Super Slam, a collection of 16 different types of mountain
sheep found on four continents.
CONDITION: Very fine as professionally custom embellished to an exquisite exhibition quality masterpiece, retaining 99% plus of the blue
and casehardened finishes with only the slightest handling marks. 98% plus of the nickel plating remains on the buttplate. The wood
is fine with a couple tiny chips at tangs, minor dings and scratches and crisp checkering overall. Mechanically excellent. A true work of
modern firearms art!
Estimate: 16000 - 25000
47

48
LOT 38
Historic, Imperial Russian Identified Exhibition Quality Relief Chiseled and
Gilt Game Panel Scene Embellished Winchester Model 1873 Lever Action
Rifle with Russian Coat of Arms and Cipher - Serial no. 347286B, 44 WCF cal., 24
inch octagon bbl., blue/gold/bright finish, walnut stock. This rifle was manufactured
in 1890 per the Winchester Collectors Association and was elaborately embellished
for a member of the Russian nobility in the period. The receiver front flats feature a
relief cut escutcheon of the Imperial Arms of the House of Romanov/Imperial Russian
on the right and a relief “coronet/CA” cypher on the left. The monogram is that of Grand
Duke Sergei Alexandrovich of Russia (1857-1905), a member of the famous Romanov family
as the son of Emperor Alexander II, younger brother of Emperor Alexander III, and nephew
of Emperor Nicholas II, the last Russian emperor/tsar. Sergei, also spelled Serge in the period,
begins with the letter C in Russian. Another of his brothers, Grand Duke Alexei Alexandrovich
of Russia, famously toured the United States and hunted with George Armstrong Custer
in the 1870s. In 1891, around the time this would have been embellished, Sergei was
just beginning to serve as Governor-General of Moscow. He became a member of the
State Council three years later and was promoted to lieutenant general and commander
of the Moscow military district in 1896.
Grand Duke Serge
Alexandrovich
George Armstrong Custer with
Grand Duke Alexi Alexandrovich

He remained governor-general until the month before his assassination by bombing by
a member of the Socialist Revolutionary Party and was still commander of the Moscow
military district at that time. The embellishment was clearly done by a very talented Russian
engraver in the “American style” . The receiver, dust cover, forend cap and buttplate tang
feature a wonderful relief engraved foliate scroll pattern on a punch dot gold plated
background. The receiver side plates feature relief engraved vignette depicting a bear in
a woodland scene on the right and a scene of a
Russian hunter shooting a bear on the left
with a wooded background. Matching
scrollwork extends to the brass cartridge
elevator. The rifle is fitted with a dovetail
blade front sight, an elevation adjustable
buckhorn rear sight and a Marble tang
peep sight. British proofs are present. The
top barrel flat is stamped with the two-line
address/patent dates marking ahead of
the rear sight and “44 WCF” at the breech.
The lower tang has the serial number. The
upgraded highly figured walnut forearm
and straight grip stock feature multi-point
checkering. The buttstock is fitted with a
trapdoor buttplate (cleaning rod
not included).
CONDITION: Fine as elaborately embellished at the time of
presentation. The barrel and magazine tube retain 40% original
blue finish with the balance a smooth brown patina. The remaining
surfaces have an overall bright appearance along with nearly all
of the gold remaining in the crisp engraving. The wood is also fine
with slight filler at the toe, some minor handling marks and crisp
checkering overall. Mechanically excellent.
Estimate: 12000 - 18000
House of Romanov
49

BOTH SIDES PICTURED
LOT 39
Special Order Winchester Model 1895 Takedown Lever Action Rifle in Desirable 405 WCF - Serial no. 86769, 405
WCF cal., 24 inch round bbl., blue finish, walnut stock. Manufactured in 1915. Chambered for the desirable 405 WCF caliber, this Winchester
Model 1895 takedown rifle is fitted with a blade front sight and elevation adjustable rear sight. The Winchester factory proof is stamped on top of the barrel and
receiver at the breech, the barrel has the nickel steel barrel marking followed by “405 W.C.F.” on the left side, and the receiver has the two line address/patent dates
marking on the left side. The three line model/patent marking is on the upper tang and the serial number is on the lower tang. A sling eyelet is mounted on the
barrel. Mounted with a Schnabel forearm with ebony insert and straight grip stock with special order checkered steel shotgun buttplate.
CONDITION: Very fine. The rifle retains 80% period refinished blue finish showing some thinning to a brown patina. The wood is also very fine with a thumb print
sized shallow gouge on the buttstock and some scattered minor handling marks overall. Mechanically excellent.
Estimate: 5000 - 7000
BOTH SIDES PICTURED
LOT 40
Scarce “Open-Top” Winchester First Model 1876
Lever Action Rifle - Serial no. 5107, 45-75 cal., 28 inch
octagon bbl., blue finish, walnut stock. Manufactured
in 1878. This rifle has the scarce First Model receiver
without any provisions for the dust cover, thus giving the name open top. Dust covers started to appear around serial number
1600, usually only on special orders by the customer and later, by serial number 3200 they were a regular feature on the rifle. With
this late of a serial number, this was probably a special order that requested it not be fitted with the dust cover. The rifle is equipped
with a dovetail blade front sight and an “1876” marked folding ladder rear sight. The top barrel flat is stamped with the two-line
address/patent dates marking ahead of the rear sight. The rifle correctly lacks a caliber marking. The upper tang is marked “MODEL
1876.” The buttstock has a trapdoor crescent buttplate. Comes with a four piece cleaning rod.
CONDITION: Fine as professionally restored, retaining 85% of the refinished blue finish with thinning to brown on the balance. Most
of the refinished case colors remain on the hammer, lever and buttplate. All markings have been recut. The revarnished wood is also fine
with minor dings and scratches. Mechanically excellent.
Estimate: 3000 - 4500
LOT 41
Antique Winchester Model 1886 Lever Action Rifle with Factory Letter - Serial no. 75400, 38-56 WCF cal., 26 inch octagon bbl.,
blue/casehardened finish, walnut stock. Manufactured in 1893. The included factory letter lists the rifle in .38-56 caliber with an octagon barrel and plain
trigger when received at the warehouse on 4 February 1893 and shipped on 14 February 1893 in order number 14610. Fitted with dovetailed German
silver front and elevation semi-buckhorn rear sights. Mounted with a smooth forearm and straight grip stock with a crescent buttplate.
CONDITION: Good, retains traces of original blue finish and mostly silvered out case colors visible on the receiver with the balance mostly a smooth grey patina,
some light spotting scattered throughout (more dense on the receiver), and a patch of mild pitting on the bottom right of the receiver. The wood is very good with some scattered minor dings
and scratches and a small notch cut at the front of the comb. Mechanically excellent.
Estimate: 1800 - 2750
50
LOT 42
Winchester Model 1894 Lever Action Rifle - Serial no. 292982, 32-40 WCF cal., 26 inch octagon bbl., blue finish, walnut stock. Manufactured in 1904 with
standard markings including factory oval proofs on the barrel and receiver at the breech. Fitted with dovetailed beaded blade front and elevation adjustable
semi-buckhorn rear sights. Mounted with a smooth forearms and straight grip stock with crescent buttplate.
CONDITION: Fine, retains 40% original blue finish, strongest on the magazine, with the balance a smooth grey patina. The wood is very good with some minor
dings and dents scattered throughout. Mechanically excellent.
Estimate: 1300 - 1900

BOTH SIDES PICTURED
LOT 43
Winchester Model 1866 Lever Action Rifle - Serial no. 149847,
44 Henry RF cal., 24 inch octagon bbl., blue finish, walnut stock.
Manufactured in 1870. Features a dovetailed German silver blade front sight,
elevation adjustable notch rear sight, the two-line address and King’s patent marking
just ahead of the rear sight, “149847” just behind the trigger and empty stock compartment.
CONDITION: Very good, retains 20% original blue finish strongest in sheltered areas with the balance a mixture of
thinned blue and plum-brown patina. The balance of the brass shows mostly an attractive “gold tone” patina with some grinding marks
visible on the left side of the receiver. The revarnished wood is good with numerous scattered minor dings and scratches throughout and the forearm with some scattered
flaking varnish. Mechanically fine.
Estimate: 4500 - 6500
LOT 44
Documented
Antique
Winchester Model 1886 Lever Action Rifle with Factory Letter in
Desirable .50 Express Caliber - Serial no. 90105, 50 express cal., 26 inch octagon bbl., blue finish, walnut stock. The included
factory letter lists the rifle in .50/110 caliber with an octagon barrel and plain trigger when received at the warehouse on August 13, 1894 and shipped on September
12, 1894 in order number 20318. Caliber marking “50 EX” on top barrel flat near the breech with otherwise standard Winchester markings. Dovetail blade front sight,
sporting rear sight, and mounted in a smooth forearm and straight grip stock with crescent buttplate.
CONDITION: Good, showing traces of blue in areas and appears to have been cleaned at some point in its past. Strong blue finish on the bolt, scattered light surface oxidation throughout,
and light high edge wear. The wood is also good as sanded and revarnished. Mechanically excellent.
Estimate: 4500 - 6500
LOT 45
Antique Vincent Kindler East Saginaw Retailer Marked Winchester Model 1876 Lever Action Rifle - Serial no.
45896, 45-60 cal., 28 inch octagon bbl., blue finish, walnut stock. Manufactured in 1885. Marked “V. KINDLER/East Saginaw”
at the breech over the caliber marking. V. Kindler retailer markings have been found on a variety of late 19th century
Winchester firearms as well as some by other makers. Vincent Kindler’s shop was established in 1867 in East Saginaw as a retailer and
wholesaler of firearms and ammunition and is reported to have been the largest firearms retailer in Michigan. Other than the retailer marking standard Winchester proof. German silver
blade front sight with folding ladder rear sight. Mounted in a smooth forearm and straight grip stock with trapdoor crescent buttplate (cleaning rod not included).
CONDITION: Very good, showing 20% original finish fading to an attractive brown patina overall, moderate edge wear, and a few dings and scratches. The wood has some deeper nicks and
scratches but is very good overall. Mechanically excellent.
Estimate: 2750 - 4250
LOT 46
Winchester Model 1873 Lever Action Rifle in .44-40 WCF -
Serial no. 577801B, 44 WCF cal., 24 inch octagon bbl., blue finish, walnut stock. Manufactured in 1904 as a Third Model with integral dust cover rail and dust
cover with grip serrations at the rear and standard markings. Fitted with dovetailed German silver blade front and elevation adjustable buckhorn rear sights. Mounted
with a smooth forearm and straight grip stock with a crescent trapdoor crescent buttplate (cleaning rod not included).
CONDITION: Very good plus, retains 30% original blue finish with the balance mostly a plum-brown patina, some scattered rough patches, and some bright grey edge
wear. 20% nitre blue remains on the loading gate. The wood is good with some minor dings and scratches scattered throughout and some mild wear in handling areas.
Mechanically excellent.
Estimate: 2000 - 3000
LOT 47
Desirable Early Antique Winchester Model 1894
Lever Action Rifle with Factory Letter - Serial no. 4463,
32-40 cal., 26 inch octagon bbl., blue finish, walnut stock. The accompanying factory letter lists this rifle with an octagon barrel in .32-40 caliber and
plain trigger when received in the warehouse on May 8, 1895 and shipped on January 9, 1896. Two-line address and “32-40” on the top barrel flat, three-line model/
patent marking on the upper tang, and desirable early serial number on the bottom of the receiver. Fitted with dovetailed German silver blade front and elevation
adjustable notch rear sights. Mounted with a smooth forearm and straight grip stock with a crescent buttplate.
CONDITION: Good, retains traces of the original blue finish, mostly in sheltered areas, with the balance a mottled grey-brown patina. The lightly sanded and
revarnished wood is also good with some scattered minor dings and scratches. Mechanically excellent.
Estimate: 1600 - 2500
51

Stunning, Rare, Factory Engraved & Well-Documented Benchmark Example Deluxe Winchester Model 1890 Rifle
Impossible to Improve Upon - One of the Finest We have Ever Cataloged
52
AS PICTURED AND
DESCRIBED IN THE BOOK
WINCHESTER SLIDE
ACTION RIFLES VOL. I BY
SCHWING
LOT 48
Extraordinary Factory Documented John A. Gough Factory
Panel Scene Engraved Winchester Deluxe Model 1890 Slide
Action Rifle in .22 Short - Serial no. 505807A, 22 RF Short
cal., 24 inch octagon bbl., blue finish, highly figured checkered
walnut pistol grip stock. This rifle is pictured and identified by
serial number on page 175 of “Winchester Slide Action Rifles
Volume I: Model 1890 & Model 1906” by Ned Schwing and listed
as featuring “$5” engraving by John A. Gough and listed for
$36.50. Schwing indicated the photographs were courtesy of
the Cody Firearms Museum and notes on the previous page that
these photographs were taken by the factory between 1910 and
1915 for the company to keep as references and review. He also
states that Gough’s “anatomical interpretation of various animals
is possibly superior to Ulrichs’.” Gough engraved for Winchester
from 1905-1918. Schwing also notes that the engraving is similar
to pattern number 9 from the engraving catalog. Based on the
tables provided in the book on page 182, it is very clear that
factory engraved Model 1890s are incredibly rare, and this rifle
especially so. Through serial number 329999 (1907), only thirtysix
factory engraved Model 1890s are recorded in the available
records. Of those, there was only four No. 9 engraved rifles, only
two No. 9 engraved rifles in .22 short, and only a single blue
finished #9 engraved rifle recorded. The rifle was manufactured
in 1912 per the Winchester Collector’s Association, and it
features a beaded blade front sight, an elevation adjustable
sporting rear sight, “MANUFACTURED BY THE WINCHESTER
REPEATING ARMS CO. NEW HAVEN./CONN. U.S.A PAT. JUNE 26.
88. DEC. 6. 92. NOV. 27. 06. MAY 30. 1911.” and “-MOD. 1890-”
on the upper left barrel flat ahead of the rear sight, “22 SHORT”
caliber marking on the upper left barrel flat at the breech,
Winchester “WP” proofs on the barrel and receiver at the breech,
Third Model receiver with exposed locking lugs, standard upper
tang markings and matching serial numbers on the lower
tang and receiver. The receiver is engraved with flowing scroll
a detailed scene of a squirrel eating a nut on a branch on the
right and a scene of a rabbit among some grass on the left (very
fitting animals for a .22 short rifle) surrounded by scroll and
wavy line patterns with textured shading. The rifle is mounted
with a 1X fancy figured 12 groove slide handle and checkered
pistol grip stock with a hard rubber Winchester grip cap and a
blued steel crescent buttplate. The lower tang is marked “847X,”
and the end of the buttstock and inside of the buttplate are
marked with the matching assembly number “847.”
CONDITION: Excellent with 98% bright original high polish blue
finish remaining, light cycling marks visible on the receiver
rails, and some minor brown spotting on the magazine tube.
The wood is also excellent with scattered small dings and crisp
checkering. Mechanically excellent. Factory engraved Model
1890 rifles are extremely rare, with exceptional documented
examples like this being even more desirable. This rifle was
considered noteworthy enough to retain a permanent record
at the Winchester factory and remains in nearly the same
condition as it did when it was photographed over one hundred
years ago. Given the popularity of this model with collectors
for generations and their rarity, the engraved Model 1890s,
particularly those in high condition like this one, can make great
investments, and this rifle is sure to add interest
to any collection.
Estimate: 40000 - 65000

Exceptional Winchester Model 1886 Lever Action Rifle in Desirable 45-90
54
LOT 49
Exceptional Winchester Model 1886
Lever Action 45-90 Rifle with Desirable
Casehardened Receiver and Factory
Letter - Serial no. 104933, 45-90 WCF cal.,
26 inch bbl., blue/casehardened finish,
walnut stock. This is an excellent example
of a Winchester Model 1886 lever action
rifle that was manufactured in 1895. The
accompanying factory letter lists this rifle
with an octagon barrel in .45-90 caliber and
plain trigger when received in the warehouse
on July 26, 1895 and shipped on March 24,
1896. The rifle has the very desirable color
casehardened receiver, forearm cap, and
buttplate. Winchester used a casehardened
finish on these components until about 1901
when the case colors were replaced with a
blue finish. The hammer, lever and trigger
are also color casehardened. The 26-inch
octagon barrel and full length magazine have
a blue finish. The bolt and loading gate are
a fiery niter blue. The stock and forearm are
straight grain American walnut with a satin
oil finish. The barrel has the standard blued
steel sporting front sight with set screw
on the right side and a buckhorn, sporting
style, rear sight, with screw adjustable center
piece and serrated edges. The upper tang
is factory drilled and tapped. The top barrel
flat is roll-stamped with the two-line legend:
“- MANUFACTURED BY THE-/-WINCHESTER
REPEATING ARMS CO. NEW HAVEN. CONN.
U.S.A.-” ahead of the rear sight. The caliber
designation: “45-90 W.C.F.” is roll-stamped on
the top barrel flat between the rear sight and
the edge of the receiver. The upper receiver
tang is roll-stamped: “-MODEL 1886-”. The
1884 and 1885 patent dates are stamped on
the lower receiver tang behind the trigger.
The serial number is roll-stamped in script
numerals on the lower tang ahead of the rear
tang screw.
CONDITION: Excellent plus. The rifle is all
original and retains 98% plus of the original
blue and vivid color casehardened finish.
Wear on the barrel and magazine is limited
to several tiny spots of age discoloration
on the lower right edge of the barrel. The
bolt, extractor and loading gate have 98%
of the fire blue finish. The forearm cap,
receiver, hammer, trigger and lever retain
98% of the color casehardened finish. The
case colors on the buttplate have faded
slightly but remain at least 90% intact. The
barrel and receiver markings are perfect.
The stock and forearm are both in excellent
plus condition and retain nearly all of the
original oiled satin finish; wear is limited to
several very insignificant handling marks.
This is an exceptional example of an original
Winchester Model 1886 lever action rifle in
near mint condition that would be difficult to
improve upon.
Estimate: 22500 - 35000

Stunning, Investment Quality
55

56
LOT 50
Documented Like 1 of 1,000
Engraved and Inscribed Winchester
Deluxe Model 1873 Lever Action
Rifle with Factory Letter and San
Francisco History - Serial no. 129395,
44 WCF cal., 24 inch octagon bbl.,
blue finish, highly figured walnut
stock. Manufactured in 1883 as a third
model with integral dust cover rail
and dust cover with rear serrations.
The accompanying factory letter lists
this rifle with an octagon barrel in .32
caliber (currently chambered in .44 WCF;
caliber listing likely a factory error), set
trigger, checkered pistol grip stock,
casehardened receiver, and “barrel
engraved like 1 of 1000” when received
in the warehouse on August 1, 1883
and shipped the next day. Although the
inscription on the cartridge elevator
is not listed in the letter, it is most
likely factory. This inscription reads,
“W.S. Stone/San Francisco.” The rifle is
equipped with a combination Beach
front sight, an elevation adjustable
buckhorn rear sight, and a folding tang
peep sight graduated from 0 to 75
on the left side (comes with a leather
cover). The barrel has the factory 1
of 1,000 style scroll and inlaid band
motif at the muzzle and breech. The 1
of 1,000 was a special series of Model
1873 offered by Winchester between
1875 and 1879. The popularity of the
engraving patterns remained with
customers well after the last 1 of 1,000
left the factory as demonstrated with
this example. The top barrel flat is
stamped with the two-line address/
patent dates marking ahead of the
rear sight. The lower tang has the serial
number. The forearm and pistol grip
stock are highly figured, “XXX” deluxe
walnut with “H” style checkering. The
pistol grip has an ebony insert in the
grip area. The buttstock has a trapdoor
crescent buttplate. Comes with a four
piece cleaning rod. The left side of the
lower tang is stamped “XXX 4965 R.” The
assembly number “4965” is repeated
on the stock inlet and buttplate. A
contender for W.S. Stone is the manager
of the California Stage Company, which
was organized in 1854 by James E.
Birch and ran western stage coach lines
carrying passengers and mail stretching
from Boise, Idaho to Mexico.

"Barrel engraved
like 1 of 1000"
During its early years it was the main stage line carrying passengers during the California Gold Rush and went on to serve
the widely successful silver mines in Nevada. According to his obituary, Stone’s association with the company made him
“one of the most widely known men on the coast.” Stone died in 1912 at the age of 82.
CONDITION: Very good, retaining 70% faded period refinished blue finish with some very scattered light pitting. Patterns of
case colors remain on the hammer and lever. The engraving and inscription are crisp. The wood is also very good with minor
dings and scratches and some worn checkering. The set trigger does not function, otherwise action cycles properly. An
interesting inscribed Model 1873 with factory documented like 1 of 1,000 barrel scroll engraving that will be a welcomed
addition to any Winchester or Old West collection.
Estimate: 18000 - 27500
57

BOTH SIDES PICTURED
LOT 51
Fine Documented Special Order Winchester
Deluxe Model 1876 Lever Action Rifle with
Factory Letter - Serial no. 53011, 40-60 WCF cal.,
28 inch bbl., blue/casehardened finish, highly figured
checkered walnut pistol grip stock. This is a fine example of a documented,
Special Order, Winchester Deluxe Model 1876 lever action rifle with factory letter. The letter lists the features as:
“Type: Rifle, Caliber: 40/60, Barrel Type: 1/2 Octagon, Trigger: Plain, Checkered stock with pistol grip, 1/2 Magazine, Shotgun butt” and
“Casehardened”. The letter states this rifle was shipped from Winchester on June 4, 1886. The rifle has a blued 26-inch barrel with casehardened
forearm cap, receiver, hammer, trigger and lever and shotgun buttplate. The dust cover and loading gate have a fire blue finish. The forearm and pistol grip stock are highly
figured, fancy grade, walnut with a piano finish and Winchester “Style H” checkering. The bottom of the pistol grip has a horn or ebony inlay. The barrel has a replacement Sheard
front sight with 1914 patent date and a sporting style buckhorn rear sight with flat top. A folding graduated peep sight is mounted on the upper receiver tang. The Third Model
receiver has an integral dust cover rail and a dust cover with serrated edges. The top of the barrel is roll-stamped: “WINCHESTER’S-
REPEATING ARMS. NEW HAVEN. CT./KING’S-IMPROVEMENT-PATENTED-MARCH 29.1866. OCTOBER 16. 1860.” in two lines ahead of the rear
sight. “CAL. 40-60” is stamped on the top barrel flat between the rear sight and the receiver. “40-60” is roll-stamped in script numerals
across the bottom of the cartridge elevator. The serial number is stamped in small numerals across the lower tang between the lever
latch and the rear tang screw.
CONDITION: Fine. This rifle retains 50% of the faded original blue finish. Most of the blue finish is on the barrel; has started to fade to a
plum colored patina and there are several minor scratches along both sides of the round portion of the barrel. The caliber markings and
Winchester legend are sharp. The dust cover and loading gate retain 75% of the original blue finish. The receiver has 30% of the original casehardened finish; the case colors have faded slightly and silvered on contact points. The
case colors on the forearm cap have aged to a dark patina. The hammer, trigger and lever retain 90% of the strong case colors. The buttplate has an even silver patina with a few spots of age discoloration. The highly figured walnut
stock and forearm are fine and retain much of the original high polish piano finish on the buttstock. The checkered panels on the forearm and pistol grip show light-moderate handling wear. The stock and forearm have a few fairly
minor handling marks with a shallow chip on the upper right side of the stock at the junction with the buttplate and a tiny chip at the end of the stock comb. Deluxe Winchester Model 1876 rifles are
scarce in any condition. This is a fine example of a deluxe, special order, Winchester Model 1876 Lever Action rifle.
Estimate: 11000 - 16000
BOTH SIDES PICTURED
58
LOT 52
Antique Winchester Deluxe Model 1894 Lightweight Takedown Lever Action
Rifle with Inscription - Serial no. 69724, 30 WCF cal., 26 inch part octagon bbl., blue finish, highly figured checkered walnut stock.
Manufactured in 1896 per George Madis’ serial number range. The rifle is equipped with a raised beaded blade front sight, three leaf rear sight and folding tang peep
sight. The barrel is stamped with the two-line address and “30 WCF” on the top flat and the two-line nickel steel marking on the upper left flat. The half magazine has
the 1893 patent date on the takedown latch. The nicely figured, deluxe walnut forearm and pistol grip stock feature “H” style checkering. The buttstock is fitted with a hard
rubber Winchester shotgun buttplate. Assembly number “8756”, “X”, “OH”, “RB” on left side of tang with matching number “8756/94” on buttstock inlet. The factory hard rubber pistol
grip cap has been period replaced with an inscribed silver cap which reads, “S.C. Dizer/Boston/1874 Oct. 29th 1899.” Silas Canterbury Dizer (1850-1907) was the son of Marshall C. Dizer
and worked in his family’s shoe business D.C. Dizer & Co. (later Dizer Shoe Company) in East Weymouth south of Boston. They erected a three story factory in 1861 and were the largest producers of “Donelson”
fancy nailed miner’s boots in the 1860s and one of the largest shoe companies in the country. They remained in business until they were sold in 1910.
CONDITION: Fine, retaining 70% original blue finish with the balance thinning to a brown. A small patch of pitting is present at the muzzle. 20% original niter blue remains on the loading gate. 40% original case colors remain on
the hammer and lever. The wood is very good with a repair near the toe, a few long scratches, some minor handling marks and crisp checkering overall. Mechanically excellent.
Estimate: 4500 - 7000

Masterpieces by the Hand of
L.D. Nimschke

60
ENGRAVING PATTERN
ILLUSTRATED IN THE BOOKS
STEEL CANVAS AND L.D.
NIMSCHKE: FIREARMS
ENGRAVER BY WILSON

LOT 53
Extraordinary Extremely Rare L.D. Nimschke
Presentation Engraved Evans Repeating Co. Transition
Lever Action Sporting Rifle - Serial no. 674, 44 Evans cal.,
28 inch octagon bbl., blue/nickel finish, walnut stock. This
Evans Lever Action Sporting Rifle was manufactured by the
Evans Repeating Rifle Company, Mechanic Falls, Maine in
1876-1877. The Evans Lever Action Rifle was a distinctive
design with revolving, butt-loading magazine and hammer
mounted on the underside of the frame. The rifles had an
exceptionally large magazine capacity of 34-rounds and were
chambered for the .44 caliber Evans Short cartridge. The
Evans Repeating Rifle Company manufactured an estimated
1,050 Transitional Model Sporting Rifles. The Transitional
Models had the same frame shape and concealed hammer
as the Old Model rifles but featured a thinner buttplate with
no heel piece and a lower butt-piece which covered part of
the magazine. The Evans Repeating Rifle Co. made a number
of deluxe presentation rifles for promotional purposes; this
rifle is apparently one of those deluxe presentation rifles. The
rifle has a 28 inch blued, full-octagon barrel with globe front
sight and folding leaf rear sight. The forearm cap, receiver,
hammer, lever, magazine and buttplate have a nickel plated
finish. The top of the barrel is roll-stamped with the legend:
“EVANS REPEATING RIFLE MECHANIC FALLS.ME/PAT. DEC.
8, 1868 & SEPT. 16, 1871” in two lines followed by the serial
number “674”. The forearm cap and the top and sides of the
receiver are fully engraved with flawlessly executed Germanic
scroll engraving on a punch-dot background. A banner on
the left side of the receiver is engraved with the name: “James
Barbour” in Old English lettering. Page 230 of “STEEL CANVAS”
by R.L. Wilson shows a deluxe Evans rifle engraved by Louis
Nimschke along with pulls for other Nimschke engraved Evans
Rifles. The stock and forearm are well figured, fancy, walnut
with a high polish varnish finish.
CONDITION: Excellent. The rifle is in excellent, original,
condition and retains 97% of the blue finish on the barrel and
95% of the original nickel plated finish on the forearm cap and
receiver. There is some minor finish loss on the bottom of the
lever. The buttplate shows more handling wear and retains
60% of the nickel plated finish. The flawlessly executed scroll
engraving is crisp and deep. The stock and forearm are both in
excellent overall condition with 95% of the varnish finish: wear
is limited to several minor handling and storage marks. This
is a rare example of a deluxe, engraved, presentation Evans
Lever Action Rifle.
Estimate: 30000 - 50000
61

Benchmark Condition, Investment Quality Evans New Model Lever Action Sporting Rifle
The Finest Example We Have Ever Cataloged
62
LOT 54
Outstanding Evans
Repeating Rifle Co. New
Model Lever Action
Sporting Rifle - NSN,
44 Evans cal., 30 inch
octagon bbl., blue finish,
walnut stock. One of
approximately 3,000
manufactured from
1877 to 1879 by Evans
Repeating Rifle Co. of
Mechanic Falls, Maine.
Until the 20th century the Evans rifles were
the only arms mass produced in the state of Maine and they
boasted an innovative rotary magazine that held up to 34 rounds,
putting them well above their competitors at the time. Perhaps the main
downfall of these rifles, as well as the company, was their unique cartridge, which was
at times difficult to find on the frontier. The barrel features a dovetail blade front sight and the one-line address/patent
dates legend ahead of the notch and folding ladder sight, which is graduated out to 1,100 yards. The New Model features
include the forearm that fits square at the front of the receiver and a dust cover. The lever and buttplate are casehardened,
and the remaining surfaces are blued.
CONDITION: Excellent, retaining 95% plus original blue finish thinning to brown on the balance. 95% vivid original case
colors remain on the lever and buttplate. The wood is very fine with minor dings and scratches and some crazing of the
varnish mostly on buttstock. Mechanically excellent. Quite possibly the finest example of a blued Evans sporting rifle extant.
Estimate: 9000 - 14000

Not All Art is Framed

The Robert M. Lee Collection
LOT 55
Phenomenal,
Well-Documented,
Museum Quality L.D.
Nimschke Identified Exhibition
Quality Panel Scene Engraved Evans
Repeating Rifle Co. Transition Model Lever Action Musket Masterpiece
- Serial no. 834, 44 Evans cal., 30 inch round bbl., nickel finish, walnut stock.
The elaborate, exhibition quality engraving pattern on this Evans musket
was done by the 19th century’s best known master engraver: L.D. Nimschke.
Nimschke’s masterful signature floral scrollwork on a fine punch dot background
covers nearly all of the receiver, extending down the sides of the magazine tube to
terminate in an arrow motif. Amongst the scrollwork on the left side of the receiver is a fantastic, highly
detailed mythical winged beast grasping a target. Six tiny engraved five-pointed stars, possibly indicating around
60 hours were required by Nimschke to complete this masterpiece, surround the trigger. Smoke pulls of the exact
engraving including the panel scene are found in R.L. Wilson’s “L.D. Nimschke Firearms Engraver” on page 66. The collection of smoke pulls featured on page 66 are from
two different Evans guns engraved by Nimschke with both guns featuring a similar beast panel scene, inferring that this musket was once part of an ornate pair. Nimschke’s
own handwritten notations date the pulls to 1876 and “engraved for Merwin, Hulbert.” Besides manufacturing and selling their own arms, the New York based Merwin,
Hulbert & Co. handled sales and distribution for a number of notable national and foreign firearms makers of the era and employed Louis Nimschke to decorate arms on the
behalf of various firearms manufacturers. In fact, Evans Rifle Co. was a subsidiary of Merwin, Hulbert. Like most other American firearms companies of the era, Evans was in the
habit of creating special one-of-a-kind masterpieces reflecting the highest degree of craftsmanship and artistry for promotional purposes. As 19th century arms makers found out,
the best kind of advertising a company could employ to promote a product was the product itself. Manufacturers often handed out finely engraved guns to anyone thought to be a
worthy recipient. A gun placed in the hands of an influential person would go a long way in winning support and acceptance of the product. And of course there were international
exhibitions that dominated the latter half of the 19th century. These exhibitions enabled a manufacturer to promote their products on a world stage. These guns too were generally
highly embellished and were the epitome of the engraver’s art of the era. This musket certainly makes the perfect
example of exemplary artistry Evans would have wanted to showcase to
important dignitaries or at international
exhibitions. Elaborately embellished Evans
rifles are rarely encountered and are highly
sought after, but remain elusive on today’s
market, only captured in books and other
publications. Adding to its rarity is that this
musket is one of only 150 Transition Model
Muskets Evans manufactured in 1876/77.
64

ENGRAVING PATTERN
ILLUSTRATED IN THE BOOKS
STEEL CANVAS AND L.D.
NIMSCHKE: FIREARMS
ENGRAVER BY WILSON
The Robert M. Lee Collection
Transition Model series of rifles, muskets and carbines fall into the approximate 500 to 2185 serial number range and
feature a flat top frame, exposed loading port (without cover) on the right side of the frame, and two piece buttstock
that exposes the magazine tube in the center. The near full length musket type forearm is attached to the barrel by
three barrel bands. A crown is stamped on each barrel band (right side of front band and left side of middle and rear
bands). The front sight also acts as a lug for a socket bayonet (not included). The top of the barrel is stamped “EVANS
REPEATING RIFLE MECHANIC FALLS ME/PAT. DEC. 8, 1868 & SEPT. 16, 1871”and the serial number “834” stamped on
the left side under the two leaf rear sight. Sling swivels are attached to the underside of the middle barrel band and
buttstock. The buttstock and forearm are nicely figured walnut. This musket is pictured in R.L. Wilson’s “L.D. Nimschke
Firearms Engraver” on page xxxviii and Dwight Demeritt’s “Maine Made Guns and Their Makers” on page 148 and is
identified as formerly of the famed Archer L. Jackson collection. Also see Wilson’s “Steel Canvas” on page 230 for the
already mentioned smoke pulls along with another known Nimschke elaborately engraved Evans rifle.
CONDITION: Excellent, retaining 90% plus untouched original nickel plating with some scattered flaking heavier at the
high points and general loss on the buttplate. The engraving is crisp. Traces of original niter blue remain on the trigger
and loading aperture. The wood is very fine with a hairline stress crack on the forearm at the receiver (left side) and
minor dings and scratches. Mechanically excellent. Just a remarkable Nimschke identified exhibition quality panel scene
engraved Evans musket! A true work of 19th century firearms art that would be difficult to improve upon!
Provenance: The Robert M. Lee Collection.
Estimate: 35000 - 55000
AS PICTURED AND DESCRIBED IN THE BOOKS L.D. NIMSCHKE: FIREARMS
ENGRAVER BY WILSON AND MAINE MADE AND THEIR MAKERS BY DEMERITT
65

John Fox
THE
COLLECTION
A CELEBRATION OF THE AMERICAN WEST
We ask you to apply the idea that no other collecting discipline brings the past more to life, than the field of fine and historic arms
collecting. To know a firearm’s story and to hold it in your hand is to stand awestruck in the footsteps of those who held it first. With
that in mind, RIAC proudly presents part 1 of the John Fox Collection.
Mr. Fox had a lifelong love affair with the American frontier, the “wild west”, and “big sky country”. His collection is the finest of
its type that we are aware of and was built over many, many decades. It tells his story and the national epic that is the taming of
the American frontier. The core of the collection is
comprised of working guns of the frontier, tools from
those men and women, some identified, others lost
to time, and left to our imagination that harnessed
that unrelenting, wild landscape. We coined the term
“frontier issued” and it will be quite apparent why. These
guns are impartial, unbiased, relatable and authentic.
There is a certain majesty to their appearance. It is
earned and worn with pride, a job well done and a life
well lived. However, there is also tremendous depth
within the collection and not just by manufacturer
and model. The collection is reinforced by a number
of exceptional, rare and historic objects that serve as
benchmark representative examples of iconic 19th
century American firearms befitting of the finest
American firearms collections publicly displayed or
privately held.
66

John Fox
THE
COLLECTION
A Celebration of the American West
67

The John Fox Collection
LOT 56
Historic and Well Documented Civil War New
Haven Arms Co. Henry Lever Action Rifle Inscribed
to Battle of Stones River Prisoner of War John Fox
of the 58th Indiana Infantry - Serial no. 2293, 44
Henry RF cal., 24 inch octagon bbl., blue finish, walnut
stock. Manufactured by the New Haven Arms Co. in
1863. The barrel is fitted with a German silver blade
front sight and a folding ladder rear sight graduated to
900 yards. The top of the receiver has an empty factory
cut sight dovetail. The top barrel flat is stamped with
the two-line Henry’s patent date/New Haven address
marking ahead of the rear sight and the serial number
at the breech. The brass buttplate has a trapdoor
(cleaning rod not included). The left side plate is
inscribed “John Fox/58th IND.” Matching serial numbers
are on the left side of the lower tang, all three tang
screws, stock inlet, both buttplate screws and buttplate.
This rifle is documented by serial number as inscribed
to John Fox in Wiley Sword’s “The Historic Henry Rifle”
on page 80. John Fox is listed on the National Park
Service Civil War Soldiers and Sailors database as
serving with the 58th Indiana Infantry Regiment, Co.
C, enlisted with the rank of private and mustered out
with the rank of corporal. Accompanying copies of Fox’s
military service records indicate he mustered in on
November 12, 1861 in the 58th Indiana Infantry, Co. C,
was captured by Confederate forces at Murfreesboro,
Tennessee, on December 31, 1862 (Battle of Stones
River), was a prisoner of war at a parole camp until
July 9, 1863 when he was restored to a combat role,
mustered out of service on January 1864 in order to
68
LISTED BY SERIAL NUMBER IN THE BOOK THE
HISTORIC HENRY RIFLE BY SWORD
THE BATTLE OF STONE RIVER
THE BATTLE OF SHILOH

reenlist as a veteran volunteer with the 58th Indiana Infantry,
and mustered out on July 25, 1865. Fought from December 31,
1862 to January 2, 1863, the Battle of Stones River, the battle
where John Fox was captured, saw high casualties inflicted
on both sides and the Union Army repulsing two Confederate
attacks, ending Confederate ambitions for control of Middle
Tennessee. The 58th Indiana Infantry was organized in late
1861 at Princeton and Indianapolis, Indiana, and mustered out
of service on July 25, 1865 at Louisville, Kentucky. Throughout
the war the regiment fought in numerous engagements
including the Battle of Shiloh, Siege of Corinth, Battle of
Perryville, Battle of Stones River, Tullahoma Campaign, Battle
of Chickamauga, Siege of Chattanooga, Battle of Missionary
Ridge, Atlanta Campaign, Battle of Resaca, Siege of Atlanta,
Battle of Jonesboro, Sherman’s March to the Sea and Carolinas
Campaign, the final campaign conducted by the Union Army
in the Western Theater. In all, the regiment lost a total of 258
men, with most succumbing
to disease. Most Henry
Rifles manufactured during
the Civil War were privately
purchased by Federal soldiers
from Midwestern regiments.
The firepower of the Henry
Rifles was valued on the
frontier in the years that
followed the Civil War.
Most Henry Rifles were “working guns;”
the surviving examples typically exhibit wear
associated with years of hard use.
CONDITION: Good. The barrel has an attractive
smooth dark brown patina and crisp legend. The
hammer and lever are a mix of smooth gray and
dark brown patinas. The brass has a pleasant aged
honey colored appearance with a series of dings on
the left side plate at the top and clear inscription. The
stock shows an old coat of protective varnish done some
ago and is very good with a few hairline stress cracks at
the tangs and minor dings and scratches. Mechanically
excellent. A historically significant Henry Rifle inscribed to
an identified Civil War Union Indiana soldier and Confederate
prisoner of war.
Estimate: 40000 - 60000
The John Fox Collection
THE SIEGE OF CORINTH THE BATTLE OF JONESBORO SHERMAN'S MARCH TO THE SEA
69

Legion of
Frontiersmen
The John Fox Collection
LOT 57
Scarce Documented Legion of Frontiersmen Marked Winchester
Model 1876 Lever Action North-West Mounted Police Carbine
with Factory Letter - Serial no. 3063, 45-75 cal., 22 inch round bbl., blue
finish, walnut stock. The accompanying factory letter lists this carbine with a
sporting leaf sight and “lid” (likely referencing the dust cover) when received
in the warehouse on May 2, 1878 and shipped nearly a year later on April 25,
1879 on order number 15203. The gun’s serial number is listed on page 184
in “Arms & Accoutrements of The Mounted Police, 1873-1973” by Phillips and
Klancher as one of the Winchester Model 1876 Mounted Police arms. The
Model 1876 carbine served with the North-West Mounted Police (NWMP)
from 1878 to late 1905 and then again from 1907 to 1914 and was the official
shoulder arm for the NWMP during the North-West Rebellion and the Yukon
gold rush era, with about 1,261 having been purchased. The second model
receiver has a dust cover guide rail attached with two screws. The dust cover
has a checkered “thumbprint” oval. The barrel is stamped with the two-line
address/patent dates marking and is fitted with blade and folding ladder
sights. The carbine correctly lacks caliber markings. The upper tang is marked
“MODEL 1876.” The lower tang has the serial number. A saddle ring stud
with ring is mounted on the left side of the receiver. The right
side of the buttstock is stamped with the “NWMP” cartouche.
The underside of the stock is stamped “LOF 178,” indicating this
carbine saw use by the Legion of the Frontiersmen. The LOF was
a paramilitary group formed by former North-West Mounted
Policeman and Boer War veteran Roger Pocock
in 1905 to prepare the British Empire for a
feared invasion. The group established local
chapters throughout the empire and helped fill
the ranks of many units during the First World
War. One of the organization pages proudly
proclaims that “Frontiersmen were among the very
first Britons to go into battle against Germany in 1914.” The
Frontiersmen unit the 25th Service Battalion Royal Fusiliers based from
London served in North Africa and was mainly made up of middle aged or
older men of various backgrounds including a circus clown, millionaire, big
game hunters and even some American cowboys. The organization remains
active as a non-profit disaster relief organization.
CONDITION: Very good, retaining a patch of faded original blue finish around
the rear sight, otherwise the carbine has a smooth brown-gray patina. The
good wood shows surface chipping mostly on the forearm, couple hairline
stress cracks, dings and scratches associated with a heavily used NWMP
working gun. The stock markings are clear. Mechanically excellent. Model
1876 North-West Mounted Police/Legion of Frontiersmen carbines are rarely
encountered and are often missing from even the most advanced lever
action collections. A must have for serious Winchester collectors looking to
complete their collections.
Estimate: 6500 - 8500
70
SERIAL NUMBER IS LISTED IN THE BOOK ARMS OF
THE MOUNTED POLICE 1873-1973 BY PHILLIPS

LOT 58
Rare and Desirable Antique San
Antonio, Texas Shipped Factory
Engraved Colt Model 1877 Thunderer
Double Action Revolver with Relief
Carved Steer Head Pearl Grips and
Factory Letter - Serial no. 78160, 41 LC
cal., 4 1/2 inch round bbl., nickel finish,
pearl grips. The accompanying factory
letter lists this highly sought after Model
1877 Thunderer with a 4 1/2 inch barrel
in .41 caliber, nickel plating, factory
engraving and grips not listed when
shipped to Charles Hummel & Son of San
Antonio, Texas on September 18, 1890.
Hummel & Son was once the largest Colt
dealer west of the Mississippi River. This
shipment was for two guns. The sides of
the barrel and frame are richly engraved
with Helfricht style floral scrollwork on
a punch dot background. Scrolls and
zig-zag line motifs alternate on the
chambers of the cylinder while the rear
of the cylinder has a zig-zag line and dot
pattern band. Fan patterns adorn the
recoil shields and loading gate. Zig-zag
line and dot patterns are featured on the
barrel ahead of the two-line Hartford
address, top strap, back strap and
trigger guard.

Desirable San Antonio, Texas Shipped Factory Engraved Colt Model 1877 Thunderer Revolver
with Relief Carved Steer Head Grip
The John Fox Collection
The ejector rod housing features a wavy line and dot motif on top and star burst pattern
on the side. The extensive use of zig-zag lines and dots makes for an unusual factory
pattern on a revolver model that is rarely found factory engraved. The left side of the frame
has the three-line patent dates marking amongst the engraving. The attractive period
pearl grips have an outstanding highly detailed relief carved steer head on the right
panel. The assembly number “79” is marked on the loading gate. Matching serial numbers
are on the frame, trigger guard, and back strap. According to Colt historian R.L. Wilson,
approximately 475 Model 1877 Thunderers were factory engraved per the factory records.
This revolver and the following lot are both factory engraved, Texas shipped, shipped one
week apart and less than 100 serial numbers apart.
CONDITION: Very fine, retaining 80% original nickel plating with the balance a smooth gray
patina. The factory engraving is crisp. The grips are also very fine with minimal handling
evidence, crisp carving and fiery colors. The cylinder stop needs work as the cylinder does
not rotate properly when the action is cycled. A great piece of late 19th century firearms
art that will be a welcome addition to any Colt collection.
Estimate: 18000 - 27500
Collector’s Fact
This revolver and the following lot
are both factory engraved, Texas
shipped, sent 1 week apart and less
than 100 serial numbers apart.
72

LOT 59
Rare and Desirable Antique Texas
Shipped Factory Engraved Colt
Model 1877 Lightning Double
Action Revolver with Factory Pearl
Grips and Factory Letter - Serial
no. 78281, 38 LC cal., 4 1/2 inch
round bbl., nickel finish, pearl grips.
The accompanying factory letter
list his highly desirable Model 1877
Lighting with a 4 1/2 inch barrel in
.38 caliber, nickel plating, pearl grips
and factory engraving when shipped
to J.C. Petmecky of Austin, Texas, on
September 11, 1890. This shipment
was for two guns. Gunsmith Joseph
Carl Petmecky (1842-1929) was an
immigrant from Germany, studied to
become a gunsmith at the early age
of 9, and owned a gunshop in Austin
which he temporarily closed during
the Civil War to join the Confederacy.
He participated in General Henry
Sibley’s failed New Mexico campaign
and after returned to Austin to
devote his gunmaking skills to the
Confederacy and was a member of
an Austin homeguard unit until the
war ended. His shop was reopened
after the war and by the early 20th
century he had expanded his business
to include general sporting goods. He
was granted U.S. patents for a bore
cleaning device, firearms, firearm
improvements and spurs (see Chirsch’s
“The Texas Gun Trade”).

Factory Engraved Austin, Texas Shipped Colt 1877 Lightning
The revolver features Helfricht style floral scroll engraving on a stippled background
along with zig-zag line bordering and flourishes. A fan pattern is engraved on the recoil
shield and loading gate. Scrollwork and zig-zag line patterns alternate on the cylinder
flats. The top of the barrel is stamped with the two-line Hartford address, the left side
of the barrel is stamped “COLT. D.A. 38,” and the left side of the frame has the patent
dates marking. Matching serial numbers are on the frame, trigger guard and back
strap. According to Colt historian R.L. Wilson, “factory records indicate approximately
250 Lightnings in .38 caliber [were engraved]” and “their usual finish was nickel plating.”
This revolver and the previous lot are both factory engraved Texas shipped, sent one
week apart and less than 100 serial numbers apart.
CONDITION: Fine, retaining 60% original nickel plating with the balance a smooth gray
patina. The engraving is crisp. The grips are also fine with minimal inside edge chipping
and some minor handing marks. The action needs work. An attractive and rare factory
engraved Model 1877 Lightning fitted with factory pearl grips shipped to a noted
Austin, Texas, gunsmith and retailer.
Estimate: 9500 - 14000
The John Fox Collection
75

Authentic American Frontier Buffalo Rifle
The John Fox Collection
76
LOT 60
Phenomenal, “Frontier Issued and Converted” U.S.
Springfield Model 1868 Plains Hunting Rifle - Serial no. 5738,
50-70 cal., 32 5/8 inch round bbl., bright finish, walnut stock. The
sensational piece of American history offered here is not only a
witness to the American frontier, western expansion, the horror and
glory, but a first hand participant. It gets no more authentic than
this! In addition to the standard markings of the Model 1868, this
interesting rifle has a bone blade front sight, modified notch and
ladder rear sight (no elevator), a pinned rawhide repair on the stock
at the breech, and adjustable double set triggers. It is configured so
that the triggers must be set in order to fire the rifle. The left stock
flat has four faint cartouches. Springfield Trapdoors, particularly
the older .50 caliber models like the 1868, are known to have been
used by buffalo hunters on the Great Plains in the late 19th century
who were encouraged to wipe out the great bison herds as part
of the Indian Wars in the late 1860s to early 1880s. Some of these
rifles were no doubt also captured and used by Native Americans
who acquired them through trade or capture.
CONDITION: Its scars are its beauty. If you want a mint example
of a Trapdoor rifle look elsewhere. If you want one of the most
authentic, been there done that, tangible pieces of the American
epic that is an Indian fighter, a hunter, a survivor, a lifeline look no
further. There is no other gun in this writers experience that upon
physical inspection immediately takes you back 150 years. This rifle
radiates the struggle, the grit, the raw savagery and epic allure that
was life on the American frontier.
Estimate: 3000 - 5000

A truly inspiring gun with
character, showing years of
use and faithful service

"We are rough men and
used to rough ways"
-Bob Younger

Montana Territory Shipped "Frontier Issued" Sharps Model 1874 Rifle
LOT 61
Iconic and Magnificent Montana Territory Shipped “Frontier Issued” Heavy Barrel Sharps
Model 1874 Buffalo Rifle with Factory Letter - Serial no. C,53532, 44 cal., 26 inch octagon bbl.,
blue/casehardened finish, walnut stock. The factory letter indicates this rifle was invoiced at the
Hartford factory on November 1, 1872, to George H. Laughlin of Helena, Montana Territory, as an
“Octagon Rifle” in .44 caliber with a 26 inch octagon barrel, double set triggers, open sights, and oil
finished stocks for $39. Laughlin also ordered a second rifle in the same configuration along with
two sets of reloading equipment, 250 cartridges, and primers from a total of $132. The weight was
not given, but the rifle weighs 11 pounds 1.8 ounces, a rather heavy rifle if you aren’t on horseback
but excellent for steady shots on game or foes in the West. According to factory records, these two
rifles were the only Model 1874s shipped to George Laughlin. Unfortunately nothing is known about
Laughlin. He was like one of thousands of men and women who ventured to the West hoping to
make a fortune in precious metals or simply make a better life for themselves. This rifle was clearly
used extensively in the period but remains in solid condition typical of a trusted weapon that was
well-used but cared for since it was likely used to put food on the table and defend against would be
aggressors. The forearm and buttstock show signs of having been carried for countless hours, and it
is not hard to imagine a frontiersman clinging this rifle while searching for gold to line his pockets or
game to fill his belly. Helena was formed as gold rush town after gold was discovered in “Last Chance
Gulch” in 1864 and became the capital of the territory in 1875. The territory was a key location during
the massive commercial buffalo hunts during the 1870s when this rifle was manufactured. Other rifles
with close serial numbers are known to have been shipped in 1873. It has a nickel-silver blade front
sight, the Hartford barrel address, Lawrence patent rear sight, “CALIBRE 44” and “20” on top at the
breech, matching serial numbers on the bottom of the barrel and upper tang, adjustable double set
triggers, pewter forend cap, and steel rifle buttplate.
CONDITION: Excellent. An absolute time machine like the DeLorean from “Back to the Future.”
Physically inspecting this rifle takes you back 150 years, you can smell the sweat and leather, taste
the dust and grit and feel the unrelenting heat of the summer sun on your neck. The rifle proudly
exhibits its wear as badge of honor, and it over all condition makes it known it was well taken care of
and appreciated for the income, sustenance and protection in provided. The forearm is your portal to
the past, it shows the uncanny grip from many years in its original owners strong, blistered hands. A
phenomenal piece of frontier history, it get no better than this!
Estimate: 8500 - 12000
The John Fox Collection
79

The stories it wears are
almost as good as the stories
it could tell
Collector’s Fact
According to author Frank
Sellers, only 451 of these
rifles were produced at the
Bridgeport factory.
LOT 62
Scarce Desirable and Iconic “Frontier Issued” Sharps
Model 1874 “Hunter’s Rifle” - Serial no. 159958, 40
Sharps cal., 26 inch round bbl., blue/casehardened finish,
walnut stock. Only around 592 Model 1874 “Hunter’s Rifles”
are believed to have been manufactured per Frank Sellers
in “Sharps Firearms,” and 451 of those were manufactured
at the Bridgeport factory. These were made specifically
as more affordable hunting rifles compared to the other
Model 1874 variants, and thus, the limited number of
surviving examples are incredibly scarce. Sharps’ rifles
we among the most popular in the West in the late 19th
century and were used by pioneers, professional hunters,
fur traders, military officers, and Native Americans to put
meat on the table and defend themselves. This rifle has
open sights and standard Sharps markings. The buttstock
has evidence of brass pin/tack decoration at the wrist and
butt. The included copy of the Sharps’ ledger indicates this
Hunter’s Rifle was shipped to W.L. Cushing & Moore which
had locations in New Orleans, Louisiana and Galveston,
Texas.
CONDITION: Fair in overall condition but radiant in the
spirit of the American West, proudly and confidently
exhibiting the scars of such a cruel and glorious
environment. The well-worn wood is “fair” and likewise
confidently wears its imperfections with pride: repairs,
cracks, and splinters with definitive evidence of Indian
tack decoration. Mechanically fine. An exceptional piece
of authentic western American history. The stories it wears
are almost as good as the stories it could tell.
Estimate: 6500 - 9000

The John Fox Collection
LOT 63
Beautiful Pair of Cased Silver-Plated and Gold Washed L.D. Nimschke Engraved, Monogrammed Colt Model 1861 Navy
Percussion Revolvers -A) Engraved Colt 1861 Navy Revolver - Serial no. 17383, 36 percussion cal., 7 1/2 inch round bbl., silver/
gold-plated finish, antique ivory grips. This cased pair of deluxe New York engraved and cased Colt Model 1861 Navy revolvers was
manufactured in 1864. The revolvers are decorated with the distinctive American style engraving of L.D. Nimschke which features bold
scrollwork on a punchdot background, wavy line and wavy line and dot borders. The forward portion of the hammer on each revolver
is engraved with a wolf or hound head motif. Both revolvers are engraved with the monogram “MFR” on the back strap. “MRF” is also
engraved on the brass shield inlaid on the top of the case lid. The engraving on the revolvers is similar but not identical; Pistol No. 17302
has a star engraved on the top of the barrel between the Colt legend and the front sight but there is no engraving on the barrel of No.
17383 in the same location. The Colt legend: “ADDRESS COL. SAML COLT NEW_YORK U.S. AMERICA” is roll-stamped on the top of both
revolvers. Both revolvers are roll-engraved with the Texas Navy battle scene with hand-engraved wavy line and dot borders. The rollstamped
“COLTS/PATENT” markings on the left side of the frames of these revolvers are enclosed in panels formed by scrollwork. The “36
CAL” markings on the left sides of the trigger guards are enclosed in rectangles with rounded ends. The full serial number is stamped on
the bottom of the barrel lug, trigger guard and back strap of each revolver. The cylinder of each revolver is stamped with the partial serial
number 383 and 302 respectively. All of the visible serial numbers match on both revolvers. Both revolvers have one-piece full-checkered
grips. The revolvers are silver-plated and highlighted with a gold wash. The mahogany American style case has brass bound corners on
the lid and brass reinforcements on the sides. The case has seven compartments and is lined with a burgundy colored velvet interior.
81

The John Fox Collection
82
The case contains: (1) 250 count tin of Eley percussion caps with blue paper label, (2) silver-plated belt pistol size powder
flask with fixed charger embossed on both sides of the body with the American Eagle and Shield motif above crossed banners
and a cannon, (3) two silver-plated oil bottles, (4) silver plated cleaning rod with flared top, (5) straight leg, double cavity, .36 caliber bullet
mold marked: “COLT’S/PATENT” across the top of the sprue cutter and “36H” on the right block, (6) silver-plated, L-shaped, combination screwdriver
and nipple wrench, (7) two spare, silver-plated, percussion nipples and mainspring and (9) key. This set of revolvers was formerly part
of the Johnny Bassett and Ron Deane collections.
CONDITION: Fine with 50% of the period silver-plated finish with significant amounts of the delicate gold washed finish in protected areas.
The silver-plated finish is flaking on the bottom of the barrel lug, loading lever and lower half of the barrel. The cylinder retains most of the
Texas Navy battle scene; the safety pins are battered but intact and the percussion nipples show light flash pitting. The flash pitting is minimal
on the hammers and in the hammer well. The flawlessly executed American style engraving on both revolvers is sharp and deep. The grip has sharp
checkering and has aged to a mellow yellow patina, with several minor age cracks in the left heel. The action is tight and functions well. The case exterior has
been revarnished overall and is in very good condition. There is a repaired crack across the bottom of the case. The case lining has faded slightly. Wear is limited
to compression marks and oil stains from contact with the revolver cylinders and grips and a bulge in the lining from the crack in the bottom of the case. The
accessories are all in very good condition and the silver-plated powder flask, cleaning rod and bullet mold are original to the casing. B) Engraved Colt 1861
Navy Revolver - Serial no. 17302, 36 percussion cal., 7 1/2 inch round bbl., silver/gold-plated finish, antique ivory grips. As described in “A”.

The John Fox Collection
CONDITION: Fine with 40% plus of
the period silver-plated finish with significant
amounts of the delicate gold washed finish in protected areas.
The silver-plated finish is flaking on the bottom of the barrel lug, loading lever and
lower half of the barrel. The cylinder retains most of the Texas Navy battle scene; the safety pins are
battered but intact, and the percussion nipples show light flash pitting. The flash pitting is minimal on the hammers
and in the hammer well. The flawlessly executed American style engraving on both revolvers is sharp and deep. The grip has sharp
checkering and has aged to a mellow yellow patina with a repaired hairline crack on the right side that runs the length of the grip and splits at
the heel; the left heel of the grip has several minor age cracks. The action is tight and functions well. This is a fine pair of New York cased and L.D.
Nimschke engraved Colt Model 1861 Navy revolvers with the original case and accessories. Cased examples of the Model 1861 Navy are scarce
and this pair of Nimschke engraved, silver-plated, gold washed represents one of the best double cased sets of these revolvers available.
Estimate: 30000 - 50000
83

BOTH SIDES
PICTURED
The John Fox Collection
LOT 64
Factory Vine Scroll Engraved and Gold and Silver Plated Colt Pocket Navy
Percussion Revolver with Carved Grip - Serial no. 5564IE, 36 cal., 4 1/2 inch octagon
bbl., silver/gold finish, carved antique ivory grips. This revolver was likely manufactured
and engraved around 1865 and has the “IE” marking by the main serial number locations
used by the factory on revolvers designated for engraving and special grips. The exact
year is not clear due to conflicting information on the production dates of this model which is
now believed to have been manufactured in 1865-1872. It features the classic “vine scroll” patterns found on the late
Colt percussion revolvers on the barrel, loading lever, frame, and grip straps. The hammer has the wolf head design
and “COLTS PATENT” hand engraved on the left side of the frame like many Gustave Young engraved revolvers. The
engraving patterns and marking very closely match the engraved Pocket Navy shown on page 152 of “The Book of
Colt Engraving” by Wilson. The revolver is finished with silver on the barrel and grip straps, gold on the loading lever,
cylinder, and hammer; and case colors on the frame. The grip has Justice seated and an eagle with arrows by her side carved on the left side. The barrel has a dovetailed blade front sight and
“ADDRESS COL. SAML COLT NEW YORK U.S. AMERICA,” and the left side of the trigger guard has “36 CAL.” There is a “S” marking behind the trigger guard bow on the front strap, and there is a
“4” in the hammer well.
CONDITION: Fine with 80% original silver plating on the barrel with aged patina, traces original gold on the cylinder, 75% plus bright original gold on the hammer and loading lever, traces
of original silver on the grip straps, aged patina on the exposed brass, smooth gray patina on most of the frame and cylinder, dings concentrated on the cylinder and recoil shield, generally
crisp markings aside from the cylinder scene, and crisp engraving. The grip is fine and has age cracks, attractive aged tones and natural grain, and mild wear. Mechanically fine. This is a very
attractive classic Colt with classic vine scroll engraving and a distinctive carved grip.
Estimate: 7000 - 11000
BOTH SIDES
PICTURED
84
LOT 65
Very Rare
Factory
Engraved and Gold and Silver
Plated Colt Model 1862 Police Percussion Revolver with Carved Grip -
Serial no. 21545, 36 cal., 4 1/2 inch round bbl., silver/gold finish, antique ivory grips. This
revolver was manufactured in 1863 per Colt and was factory engraved and gold and silver plated.
The engraving is very similar to some of the Gustave Young engraved Colts in “The Book of Colt
Engraving” by Wilson, including the Model 1860 Army on page 82. “P” is marked near the main
serial numbers which is associated with factory plated Colts. Plating is particularly rare on percussion Colt revolvers. This
revolver would have been an excellent presentation piece for a military officer, important public figure, or wealthy gentleman. The Model 1862 Police
is arguably the most modern and attractive of Colt’s percussion revolvers. The engraving consists of mainly classic scroll patterns along with floral, shell,
and fan motifs and textured backgrounds. The barrel, loading lever, cylinder, and hammer are gold plated over silver. The frame and grip frame are silver
plated. The grip is checkered and carved with a woman, likely representing Liberty, and has the serial number marked in the rear mortise. It is marked
with the New York address on top of the barrel, “S” on the bottom of the barrel, “PAT. SEPT 10th 1850” in one of the cylinder flutes, “COLTS/PATENT” on
the left side of the frame, and all matching serial numbers.
CONDITION: Good with around 20% original plating remaining overall including 60% plus original silver on the grips straps and 50% original gold on the loading lever, mostly gray patina on the balance, patches of pitting, strike
marks on the top of the barrel, and general mild wear. The grip is very good with crisp checkering and carving, a crack at the heel on the left, attractive natural tones, and mild wear. The action and loading lever latch need work. All
factory engraved Colt percussion revolvers are comparably rare and desirable collectors items. Those with special plated finishes such as gold and silver are even more so. Combine both of those with a matching numbered carved
and checkered grip and you have a significantly rare and valuable Colt.
Estimate: 8000 - 12000

BOTH SIDES PICTURED
LOT 66
Rare Hopkins & Allen Chichester Revolving Pocket Shotgun - Serial no. 1311, 38 RF gauge, 24 5/8
inch round bbl., nickel finish, walnut stock, hard rubber grips. Manufactured by Hopkins & Allen for the
Chichester Rifle Company of Jersey City, NJ. Top strap marked “SCOTT./38 CAL RIM FIRE/PAT. MCH 28,
71 MAY 27, 79”. Designed for .38 caliber shot shells. Matching serial number on the frame, right grip,
barrel, and cylinder. Includes a shoulder stock with nickel plated furniture.
CONDITION: Very fine overall, retaining 85% original nickel, some oil staining, and areas of spotting
mostly concentrated on the frame. The stock is also very fine with some scratches and nearly all of its
nickel. Mechanically excellent.
Estimate: 1600 - 2500
BOTH SIDES
PICTURED
The John Fox Collection
86
LOT 67
Factory Engraved Hopkins & Allen XL No. 3 Spur
Trigger Revolver - Serial no. 3091, 32 RF cal., 3 inch octagon
bbl., nickel finish, rosewood grips. Manufactured around the
mid-1870s to 1880s. Near full coverage factory floral scroll engraving mixed with geometric
patterns accented with punchdot scrolls adorn this revolver.
CONDITION: Very fine, retaining 90% original nickel finish, most of the wear concentrated at the
muzzle, and scattered spots of oxidation/pitting. The grips are also very fine with minor wear.
Mechanically excellent.
Estimate: 1200 - 1700
BOTH SIDES PICTURED
LOT 68
Outstanding Exhibition Quality Factory Engraved Hopkins & Allen
XL No. 2 Spur Trigger Revolver with Incised Pearl Grips - Serial no.
796, 30 RF cal., 2 1/2 inch octagon bbl., nickel finish, pearl grips. Near full
coverage factory New York style floral scroll engraving on a punchdot background. The incised
pearl grips show floral designs and filled in with black enamel for stark contrast. Matching
serial numbers on the barrel (with “K” prefix), cylinder, butt, and grip panels.
CONDITION: Excellent overall, retaining 98% plus original nickel finish, minor handling
evidence, and sharp engraving on the metal and the grips. Mechanically excellent.
Estimate: 2250 - 3500
LOT 69
Factory Engraved
Hopkins & Allen
XL No. 4 Spur
Trigger Revolver with Scarce 1 1/2 Inch
Barrel - Serial no. 240, 38 RF cal., 1 1/2 inch
octagon bbl., nickel finish, rosewood grips.
Manufactured around the 1870s-1890s. Near full
coverage factory floral scroll engraving on a punchdot background
with accompanying floral designs. Matching serial number marked on
the bottom of the barrel, front of the cylinder, inside of the right grip,
and the grip frame.
CONDITION: Very fine, retaining 85%
plus original finish, most of the loss
on the front strap, some flaking in
areas, cylinder drag line, and some
high spot wear on the grips.
Mechanically excellent.
Estimate: 1400 - 2250
BOTH SIDES
PICTURED

The John Fox Collection
LOT 70
Stunning Cased and Factory Engraved Robin Hood No. 2 Spur
Trigger with Incised Grips - NSN, 32 RF cal., 2 7/8 inch round bbl.,
nickel finish, antique ivory grips. Manufactured c. 1870-1880s. 75%
coverage floral scroll engraving on a matted background. The left
grip is monogrammed “EB” and filled black for contrast. Contained
within a gorgeous Schuyler, Hartley, & Graham leather wrapped,
embossed and silk line case with full cartridge block.
CONDITION: Excellent, retaining
98% original nickel finish, minor
handling evidence, and a
small spot of oxidation on
the butt. A few marks in the
otherwise very fine grips. The
case is good. Firing pin ground
and non-functional, otherwise
mechanically excellent. A stunning
little revolver, no doubt the finest
Robin Hood No. 2 extant.
Estimate: 1800 - 3000
87

BOTH SIDES
PICTURED
LOT 71
“Western Issued” Winchester Model 1876 Lever Action Short Rifle with Factory Letter - Serial
no. 54595, 40-60 WCF cal., 19 inch octagon bbl., blue finish, walnut stock.
Manufactured as a third model with dust cover
guide rail integrally machined as part of the receiver and a
dust cover with rear serrations. The accompanying factory letter lists
this Model 1876 as a carbine chambered in .40-60 caliber and then
changed to rifle configuration with an octagon barrel in .40-60 caliber
and plain trigger by the time it was originally shipped on November
19, 1886. It was subsequently frontier modified to short rifle with the
barrel length nearly 19 inches. While the barrel retains an original
factory “1886” marked folding ladder rear sight, a dovetail fixed buckhorn
sight has been added during its time of use. The rear of the ladder sight
rests on the base of the buckhorn sight. The period blade front sight has a sighting insert.
The top barrel flat is stamped with the two-line address/patent dates marking ahead of the ladder sight and “40-60 WCF” at the breech. “40-60” is marked
on the cartridge elevator. The upper tang is stamped “MODEL 1876.” The serial number is located on the lower tang. The straight grip stock has a trapdoor crescent buttplate (cleaning rod not
included). The legacy of the short rifle on the Western frontier is perhaps best summarized by the company that built the “guns that won the West.” Winchester eloquently remarks: “A favorite
of many hunters and shooters, the Short Rifle has always been fast to the shoulder, quick-swinging, lightweight and a pleasure to shoot. It was a favorite of the range rider who could snatch it
from his saddle scabbard and fire faster than prairie lightning.”
CONDITION: Good with tremendous character, and wonderful “as found” look. The rifle wears its scars and imperfections with pride, including a large divot on the left side of the wrist,
otherwise the wood is also good with chipping along the grain and minor dings and scratches. Mechanically excellent. A Model 1876 rifle with real wild West character from honest period use.
Estimate: 2500 - 4000
BOTH SIDES
PICTURED
BOTH SIDES
PICTURED
The John Fox Collection
LOT 72
Colt Model 1849 Pocket Percussion “Belly Gun”
Revolver with Carved Grips - Serial no. 191620, 31 cal., 2 inch
octagon bbl., blue/silver finish, carved grips. Manufactured in 1861
and subsequently cut-down to a much more concealable barrel
length and equipped with a soldered German silver blade front
sight. Other than the partially cut off barrel marking it has standard
markings, including matching serial numbers on the barrel, trigger guard, and butt with
partial number on the wedge. The grips are carved with the profile of what appears to be a
Spanish Conquistador. Pistols of this style sometimes are called “Avenging Angels”.
CONDITION: Fair, showing traces of the original silver plating on the trigger guard and back
strap. Mix of grey and brown patinas throughout with some pitting present on the exposed
metal. The loading lever assembly is absent. The grips are fine with some age cracking and a yellow coloration.
Mechanically needs work as cylinder does not rotate.
Estimate: 1800 - 3000
LOT 73
Colt First Model Derringer with Holster - Serial no. 3893, 41 RF cal., 2
1/2 inch solid rib bbl., nickel finish, metal grips. This model was manufactured
by Colt from 1870 to 1890. The top of the barrel has the standard two line
Hartford address followed by “No.1”. The frame has the standard engraving and
checkered panels on the grip area. The matching serial number is on the barrel
and butt. Includes a period brown leather holster.
CONDITION: Good. Showing a nice even grey patina overall, with a few areas of
oxidation, and sharp checkering at the heel. The trigger has been blocked with
a piece of leather, but mechanically functions when heavy pressure is applied to
the trigger. The holster is also good.
Estimate: 1200 - 1800
89

Historic Special Order Winchester 1876 Deluxe Lever Action Rifle
Identified to Prominent Montana Businessman & Banker Silas S. Huntley
LOT 74
Special Order Winchester Deluxe Model 1876 Lever Action Rifle
Attributed to Pioneer Montana Businessman Silas S. Huntley with
Factory Letter - Serial no. 9987, 45-60 cal., 28 inch octagon bbl., blue/
casehardened finish, walnut stock. The accompanying factory letter lists this
rifle with an octagon barrel in .45-60 caliber, half magazine, shotgun butt,
checkered pistol grip stock, and casehardened receiver when received in the
warehouse on April 9, 1880 and shipped the next day with one other arm.
The rifle is fitted with a combination Beach front sight, “1873” marked folding
ladder rear sight, and tang peep sight. The top barrel flat is stamped with
the two-line address/patent dates marking ahead of the rear sight and “CAL.
45-60” at the breech. “45-60” is marked on the cartridge elevator. The second
model receiver has a dust cover guide rail attached by two screws and a dust
over with oval finger guide. The checkered forearm and pistol grip stock are
nicely figured XX deluxe walnut. The buttstock is fitted with a grip insert and
a steel shotgun buttplate. The left side of the lower tang is marked “XX 876.”
The stock inlet is marked “P160.” Tradition states that this Model 1876 was
owned by Silas S. Huntley. According to a 1992 dated letter of provenance
written by Allen Hargrove, “This rifle was given to my father by Silas S. Huntley
who came to Montana in the 1870s from Boston…My dad went to work for
him in the early 1880s and worked for him until he died in 1901. it was during
this time he gave my dad this rifle.” Silas S. Huntley (1841-1901) enlisted with
the 37th New York Volunteers during the Civil War. He served on the staffs of
General Hiram Gregory Berry and General Phil Kearny, and was with each of
these generals when they were killed in the line of duty. He returned to New
York after the war but by 1867 was in Montana establishing the stage
lines in the territory. In fact, Huntley and his associates were credited
for “establishing and controlling every original stage line in Montana.” In
1891, he organized the Yellowstone Park Transportation Company where
he remained as president and general manager until his death
in 1901. The Yellowstone Park Transportation Company first
provided railroad and stagecoach service to park visitors, and
later provided automobile transport and service for those
attending the park. Includes an original 1870 canceled check
in Huntley’s name and 1897 handwritten note on Yellowstone
National Park Transportation Co. letterhead.
CONDITION: Very good plus. The barrel retains 30% original blue
finish with the balance a smooth gray patina. Traces of original
niter blue remain on the loading gate. The remaining surfaces
retain patterns of original case colors, otherwise silvered out.
The wood is very good with a hairline stress crack at the upper
tang, some minor dings and scratches and some wear to the
checkering. Mechanically excellent. A Model 1876 that surely saw
use on the open ranges of the Montana Territory and is linked to
a high profile Montana businessman.
Estimate: 7500 - 12000
The John Fox Collection
91

The John Fox Collection
92
LOT 75
Factory Graded D Game Bird Panel Scene Engraved and Inscribed Marlin Model
30 Slide Action Shotgun - Serial no. 131914, 16 gauge, 26 inch solid rib bbl., blue finish,
walnut stock. Manufactured from 1911 to 1917. Offered here is a Model 30 in grade D
configuration, which was Marlin’s “finest repeating shotgun built in this size.” The receiver
is richly engraved with floral scrollwork and finely detailed oval panel game scenes. Four
grouse are featured on the left side of the receiver. A single woodcock is featured on the
right side of the receiver. A pair of grouse in flight is featured on the bolt. The barrel has a
single bead sight and is stamped with the two-line address/patent dates on the left side.
The upper tang is marked “Marlin MODEL No. 30.” The trigger guard is inscribed “F.L. COE/
NEW HAVEN.” At the time of this writing, F.L. Coe remained unidentified but period sources
identified a F.L.Coe as a 1906 Yale graduate, a member of the Connecticut Society of Civil
Engineers, and a lyricist credited with writing the words to the 1912
song “When the Silvery Moon is Shinning from Above that’s the Time
to Hug and Spoon.” The screw heads and the trigger are plated in gold. The
remaining surfaces are blued. The highly figured walnut round forearm and pistol
grip stock feature fine fancy checkering. The buttstock is fitted with a serrated
Marlin buttplate. Length of pull is 13 1/2 inches.
CONDITION: Very fine, retaining 85% original blue finish with thinning and areas
of smooth-brown gray patina on the balance. The engraving is crisp. Some original
gold remains on the screws and trigger. The wood is fine showing a number of
minor scratches and some wear along the top of the checkering. A chip is absent from
the buttplate at the toe. Mechanically excellent.
Estimate: 14000 - 22500

The John Fox Collection
LOT 76
Montana Shipped Special Order Colt First Generation Single Action
Army Revolver with Moran Brothers of Montana Holster Rig and Factory
Letter - Serial no. 272813, 45 LC cal., 4 3/4 inch round bbl., blue/casehardened
finish, walnut grips. Manufactured in 1905. The accompanying factory letter lists
this revolver with a 4 3/4 inch barrel in .45 caliber, blue finish, checkered wood
stocks and milled grip straps when shipped to Carl Engel of Butte, Montana, on
November 4, 1905. The milled grip straps and checkered grips are highly desirable
special order factory features. The revolver also has standard Colt markings, a
period altered front sight, and matching serial numbers on the frame, trigger
guard and back strap. The back of the left grip panel is hand marked in pencil
“R.J. PAXSON/2011 ABERDEEN.” As explained in a research memo written by
Waddy Colvert, Carl Engel (1871-1956) operated a sporting goods store in Butte,
Montana, was a deputy sheriff circa 1925-1931, became an insurance agent after
1931 and resided in Reno, Nevada circa 1952 until his death in 1956. Copies of
city directories related to Engel are included. An SAA (serial number 306060) is
documented as being received by Engel in the “Colt Peacemaker Encyclopedia,”
Volume 2 on page 118. It is also known that Engel received one of 500 100th
anniversary of the birth of Samuel Colt medallions. Comes with a brown leather
holster rig featuring “MORAN BRO’S/MILES CITY M.T.” maker marking on the front
of the holster and belt. Period large decorative brass rivets adorn the belt. Already
well accomplished saddle markers by the time they opened their own shop in
1879, brothers Thomas and Hugh Moran are believed have operated the first
saddlery in legendary cattle town Miles City, Montana. Around 1895 the brothers
sold their business to Charles E. Coggshall.
CONDITION: Fine, retaining 60% original blue finish and 40% original case colors
with the balance a smooth gray patina. The grips are also fine with some minor
handling marks and some scattered blemishes in the overall crisp checkering.
Mechanically excellent. The holster is very good with period in the field added
waist notches and typical wear associated with age and use on the open range. A
special order SAA rig with Montana history.
Estimate: 4500 - 6500
93

The John Fox Collection
94
LOT 77
Rare and Desirable “Frontier Issued” Spencer Repeating Sporting Rifle with Long Barrel and Set Trigger -
Serial no. 1613, 56-46 cal., 30 inch octagon bbl., blue/casehardened finish, walnut stock. Relatively few sporting rifles
were made by the Spencer Repeating Rifle Company. While over 144,000 military guns produced during the Civil War
(107,372 purchased directly by the U.S. government), educated estimates place the sporting arms total production
from 1864-1868 at around only 1,807, and among those are multiple variations. It is chambered for the 56-46 Spencer
cartridge (.44 rimfire) which was highly effective for small to medium game. George Armstrong Custer and others are
known to have taken Spencer sporters to the West, and they are certainly rare and valuable artifacts. The serial number
was properly offset to the left of the tang mounted peep sight which was common practice beginning on the 1865
production rifles, and the bottom of the barrel has the matching serial number. The front of the frame and rear of
the forearm have the assembly number “42.” The top of the frame is marked “SPENCER REPEATING/RIFLE CO. BOSTON
MASS./PAT’D MARCH. 6. 1860.” The barrel has a blade front sight and a genuine frontier forged hand made rear sight,
and the action has an adjustable single set trigger and peep sight. The forearm has a pewter cap. The rifle is fitted with
an optional 30 inch barrel; standard Spencer sporters were fitted with 26 or 28 inch barrels.
CONDITION: Very good over all with classic been there done that, “as found” patina and light oxidation over all. The
wood shows immense character particularly on the forearm where a hand grove was literally worn into the wood
from a life spent in the saddle and in the hand. Mechanically fine. A weapon that was well used but well maintained, a
wonderful, tangible link to the American West.
Estimate: 5000 - 7000
The wood shows immense character
particularly on the forearm where a
hand grove was literally worn into
the wood from a life spent in the
saddle and in the hand.

BOTH SIDES
PICTURED
The John Fox Collection
THIS "QUICK DRAW" REVOLVER HAS
BEEN PERIOD IMPROVED FOR ITS INTENT
BY SHORTENING THE BARREL AND
REMOVING THE FRONT SIGHT
LOT 78
Utah Territory Shipped Colt Black Powder Frontier
Six Shooter Single Action Army Revolver with A.L. Furstnow
of Montana Holster Rig and Factory Letter
- Serial no. 104783, 44-40 WCF cal., 4 3/4 inch
round bbl., blue/casehardened finish, hard rubber
grips. Manufactured in 1884. The accompanying
factory letter lists this revolver with a 7 1/2 inch
barrel (currently 4 3/4 inches) in .44-40 caliber,
blue finish and type of stocks not listed when shipped to Thomas Carter of Salt Lake
City, Territory of Utah on October 6, 1886. Ten notches are marked on the left side of
the frame under the cylinder, raising questions as to what the user was tallying out on the frontier. The
ejector rod has a half moon head. Matching numbers are on the frame, trigger guard, back strap, cylinder
(“4783”), and barrel (“4783”). Although the identify of Thomas Carter has not been confirmed, period
sources indicate a Thomas Carter arrived in Salt Lake City in 1863 from Canada and started in the mining
business before operating a sporting goods store. He served two terms as city sexton and died in 1912. The
accompanying brown leather holster rig has the boxed “A.L. FURSTNOW/MILES CITY, MONT.” maker’s marking on the belt tongue and front of the holster.
Located in eastern Montana, legendary cattle town Miles City was the “end of the trail” for many Texas longhorn cattle drives in the 1890s. It was also home to Al
Furstnow who opened his own saddlery shop in 1894. Not long after he partnered with fellow local Charles E. Coggshall to become the only major saddlery company
between Billings and Dickinson, but in 1889 the partnership dissolved and a rivalry began that lasted for the next 50 years.
CONDITION: Excellent for a 1880 Utah Territory working gun with great presence and character, with a mixture of smooth gray and brown patinas and some scattered
pitting. The trigger pull is lightened, front sights removed and barrel shorted to “gun fighter” configuration. Its “flaws” are its appeal. It gets not more authentic!
Mechanically fine. The holster rig is very good holster toe plug absent, repositioned tongue, minor wear. Without a doubt this SAA is a true frontier survivor!
Estimate: 3500 - 5500
BOTH SIDES PICTURED
96
LOT 79
Engraved Meriden Firearms Co. Coach Style Side
by Side Damascus Shotgun - Serial no. 78989, 12
gauge, 19 7/8 inch solid rib bbl., blue/casehardened finish,
walnut stock. With provisions for a front sight bead on the
shortened coach gun length barrels, 2 3/4 inch chambers,
standard rib marking, and straight cylinder bores. The
action and lock plates have flourishes of light scroll
surrounding game bird scenes of what appear to be ducks
on the right and quail on the left. The underside of the
action has matching engraving and has been non-factory
stamped with a single “J” just ahead of the trigger guard.
Checkered forearm and pistol grip stock with engraved
fittings, horn grip cap, and serrated hard rubber buttplate. With 2 snap
caps. Length of pull is 13 7/8 inches.
CONDITION: Fair with the as mentioned shortened barrels, strong visible Damascus pattern, some denting around the
muzzles, small scratches and dings, and an overall brown patina. The action and locks have approximately 30% original thinning case colors, an overall gray patina with
areas of darker spotting, and mostly crisp engraving. The stock is poor with crack on left side of the wrist from the upper tang to the rear of the left lock, repaired area on
the right side under the lock, chipping out around the end of the upper tang, and small dings and scratches overall. Mechanically excellent.
Estimate: 1200 - 1800

BOTH SIDES PICTURED
LOT 80
Civil War Era Factory Engraved Colt Model 1860 Army Percussion
Revolver with Holster and Patriotically Carved Grip - Serial
no. 133874, 44 cal., 8 inch round bbl., blue/casehardened/silver
finish, carved antique ivory grips. This revolver was manufactured in
1863 and almost certainly engraved by Gustave Young’s shop. They
were Colt’s primary engraving contractors during this period. The
engraving is primarily scroll engraving with floral accents and punch
dot backgrounds in his classic style, as is the wolf head motif on the
hammer and the shell patterns on the back strap. “E” is marked by the
main serial number locations indicating the revolver was selected by
the factory for engraving. The grip is carved with a patriotic design
with an eagle, flags, shield, and “E PLURIBUS UNUM” on the left and
is marked with the matching serial number in the rear mortise. The
revolver also features a blade front sight, the New York barrel address,
Naval Battle of Campeche cylinder scene, standard patent markings,
all matching serial numbers, recoil shield and back strap cut for a
shoulder stock, and “4” and “44 CAL” on the left side of the trigger
guard. The trigger guard also has a brass plate fitted inside the guard
that holds the trigger back. The hammer sight groove is also enlarged.
The lot includes a tooled brown leather holster with no
visible maker’s mark.
CONDITION:
Fine with crisp
engraving, traces
of original case colors on
the loading lever, mostly smooth
gray and brown patina, aged patina on the
trigger guard, mild pitting mainly on the barrel,
and mostly distinct cylinder scene. The grip is fine and
has distinct carving, mild age cracks on the butt, and attractive
natural tones and grain. The holster is very good showing some
age cracking and discoloration with tight stitching overall. Due to the
alteration, the hammer does not hold at half or full cock, but the action
is otherwise mechanically fine.
Estimate: 7000 - 12000
The John Fox Collection
BOTH SIDES PICTURED
LOT 81
Nez Perce Attributed 19th Century Pipe Tomahawk - The old note attached to this tomahawk signed by Frank D. Low indicates he purchased it in 1883 or 1884 while
working at the Worden & Co. general story in Missoula, Montana, from a man who identified himself as a member of the Nez Perce tribe in Idaho. Low is confirmed in period
sources from Missoula, and the Nez Perce Indian Reservation is just to the west of Missoula in north central Idaho. The Nez Perce were at war with the U.S. in June to October
1877 due to decades old tensions and ongoing encroachment on their lands during and following the gold rushes. Part of the tribe were subsequently forced south into Indian
Territory but were allowed to return to the Northwest in 1885. The head is 6 5/8 inches long including the bowl and has a 2 1/8 inch wide edge, file work, semi-triangular
accents with dot patterns, eye-shaped eye, and brass ring at the edge of the bowl. The thin shaft has some brass tack decoration and is just under 19 inches long.
CONDITION: Fine with brown patina, mild oxidation, and mild wear on the head and a missing tack, mild wear, and some thin cracks in the shaft.
Estimate: 3000 - 5000
99

LOT 82
Fine, Rare and Desirable Gustave Young Factory
Engraved Gold and Silver Plated Colt Model 1851
Navy Percussion Revolver with Tooled Holster -
Serial no. 55162, 36 cal., 7 1/2 inch octagon bbl., gold/
silver finish, antique ivory grips. This revolver was
manufactured in 1856 and has an apostrophe marked by
the matching serial numbers on the barrel, frame, trigger
guard, and back strap indicating factory engraving.
The engraving was most certainly executed by master
engraver Gustave Young and features his classic style
with floral booms and animal heads among the highly
detailed scroll engraving along with fan patterns. Note
the dog head among the scrolls on the left side of the
barrel. The overall pattern is the classic style perfected
by Young, particularly the pattern on the right side of
the barrel. The “COLTS/PATENT” marking inscribed rather
than stamped on the left side of the frame is also typical
of Gustave Young’s work. The pattern on the right side
of the barrel and loading lever is very typical of Gustave
Young’s work as is the classic wolf/dog head on the
hammer. The revolver was finished with a combination
of gold and silver plating and is fitted with a smooth
grip. The barrel has a cone front sight and the “-ADDRESS
SAML COLT NEW-YORK CITY-” on top of the barrel, the
Naval Battle of Campeche scene on the cylinder, and
matching serial numbers. Accompanied by a handsome
and rare tooled brown leather slim Jim holster.
CONDITION: Fine with 75% original silver plating
showing a classic “as found” patina, strong patches of
original gold plating (particularly strong on the hammer),
crisp engraving and markings including most of the
cylinder scene, a few patches of plating, and otherwise
gray patina on the cylinder. The grip is very good and
has attractive natural tones and grain, mild wear, and
small period repair, a crack, and a chip on the right.
Mechanically excellent. The holster is very good and has
mild wear and some cracking on the flap. This is a classic
Gustave Young engraved Model 1851 Navy with an
unmistakable and authentic been there look.
Estimate: 9500 - 15000
The John Fox Collection
100

BOTH SIDES
PICTURED
The John Fox Collection
LOT 83
Nickel Plated Colt First
Generation Single Action Army
Revolver
with A.L. Furstnow
of Montana Holster
Rig and Factory Letter
- Serial no. 226661, 45 LC
cal., 4 3/4 inch round bbl.,
nickel finish, hard rubber grips. Manufactured in 1902.
The accompanying factory letter lists this revolver with a
4 3/4 inch barrel in .45 caliber, nickel finish and type of stocks not listed when shipped to Simmons
Hardware Co. of St. Louis, Missouri, on May 22, 1902. The revolver has standard Colt markings,
matching serial numbers on the frame, trigger guard and back strap and desirable full nickel
plating. The accompanying brown leather holster rig has the boxed “A.L. FURSTNOW/MILES CITY,
MONT.” maker’s marking on the belt tongue and front of the closed toe/open top holster. Located
in eastern Montana, legendary cattle town Miles City was the “end of the trail” for many Texas longhorn cattle drives in the
1890s. It was also home to Al Furstnow who opened his own saddlery shop in 1894. Not long after he partnered with fellow
local Charles E. Coggshall to become the only major saddlery company between Billings and Dickinson, but in 1889 the
partnership dissolved and a rivalry began that lasted for the next 50 years.
CONDITION: Fine, retaining 70% original nickel finish with the balance a smooth dark brown patina overall. The replacement
grips are very good with a small chip at he bottom (right panel), some minor handling marks, and wear along the top of
the checkering. Mechanically excellent. The period in the field modified holster rig is very good with the tongue
having been repositioned and shortened, replaced buckle
and wear associated with age and use on the open range.
The Furstnow markings are clear. An attractive early 20th
century nickel plated SAA with historic Montana saddlery
holster rig.
Estimate: 4000 - 6000
102
LOT 84
Montana Shipped Colt Bisley Model Single
Action Army Revolver with Factory Letter - Serial
no. 317212, 38 WCF cal., 5 1/2 inch round bbl., blue/
casehardened finish, hard rubber grips. Manufactured in
1911. The accompanying factory letter lists this revolver
with a 5 1/2 inch barrel in .38-40 caliber, blue finish and
type of stocks not listed when sold to Clark Fork Trading
Co. of Belfry, Montana, and shipped to Marshall Wells
Hardware Co. of Billings, Montana on March 18, 1911. Standard
Colt markings along with matching serial numbers on the frame, trigger guard, back
strap and both grip panels. The right grip has two notches carved in at the base. A
tally for something no doubt!
CONDITION: Very good plus, retaining 40% original blue finish and some original
case colors in the protected areas, otherwise the revolver has a smooth gray patina
with some scattered pitting. The grips are also very good with some wear on
the high edge, some minor handing marks and generally crisp checkering.
Mechanically needs work as cylinder does not lock properly.
Estimate: 2500 - 4000
BOTH SIDES
PICTURED

Historically Significant N. Curry & Bro. Shipped Sharps Model 1874 Rifle,
Shipped to San Francisco During the Mining Era
The John Fox Collection
LOT 85
Rare and Desirable Western Shipped N. Curry & Bro. of San
Francisco “Frontier Issued” Sharps Model 1874 Rifle with Factory
Letter - Serial no. 158256, 40-70 Sharps cal., 30 inch octagon bbl., blue/
casehardened finish, walnut stock. The included factory letter identifies
this rifle as invoiced as a Model 1874 Sporting Rifle invoiced on April 11,
1877, to N. Curry & Bro. of San Francisco, California. The rifle is listed as .44
caliber (hand changed on the letter to .40) case length not documented,
30 inch octagon barrel, double set triggers, open sights, oil finished wood,
and a weight of 9 1/2 pounds for “$34 less 20 + 10%.” It was shipped in
a group of eight sporting rifles (two in .40 caliber and six in .44 caliber)
priced at $248.05 including the cost of the cases and ammunition. In 1863,
Nathaniel and John Curry inherited their brother Charle’s business upon
his death in 1863 and operated as western wholesalers and sales agents
for multiple American firearms companies including Sharps Rifle Co. They
were among the most significant of all western arms dealers in the second
half of the 19th century. It has a Lyman beaded blade front sight, “Old
Reliable” and the Bridgeport address ahead of the “1876” marked notch
and folding ladder rear sight, “CALIBRE 40” on top at the breech, “70” on
the right at the breech, the matching partial serial number “8256” inside
the forearm, “5” and “3/16” and the matching serial number on the bottom
of the barrel, the matching serial number repeated horizontally on the
upper tang ahead of the empty peep sight taps, adjustable double set
triggers, and smooth stock with steel buttplate.
CONDITION: Very fine overall, a result of authentic use and authentic care
with 75% blue finish on the barrel thinning to an even aged patina and
casual frontier wear. Traces of original case colors remain on the frame,
the balance is an even toned grey patina. The original stock and forearm
are like wise good and has some small chips at the edges, mild dents and
scrapes, and some spots of discoloration. Mechanically excellent. A very
fine Western Shipped California Sharps.
Estimate: 5000 - 7500
104

BOTH SIDES PICTURED
The John Fox Collection
LOT 86
Incredibly Scarce Sharps Model 1851 “Box Lock” Percussion Sporting Rifle - Serial
no. 1666, 44 percussion cal., 26 1/4 inch octagon bbl., blue/casehardened finish, walnut stock.
These early “Box Lock” rifles were manufactured by Robbins & Lawrence under contract with Sharps from
November 1, 1852, until April 1, 1855. They are readily identifiable by their hammers mounted on the inside of the
lock and by the rounded “slant breech” actions. Richard S. Lawrence and William Jones were responsible for taking Christian
Sharps prototype and modifying it for mass production. The changes made without Sharps’ knowledge and approval are said to
have been a large part of why he eventually left the company that bore his name. These sporting rifles are believed to have mostly
seen hard use by pioneers in the West for hunting and defense. Only 53 were manufactured in this configuration. Many have
naturally been lost or destroyed over the years. Similar rifles are pictured in “The Slant Breech Models” chapter of Sellers’ “Sharps
Firearms.” This later production example was never drilled for a saddle ring bar on the left side (unlike the majority of the Model
1851s) and has the brass buttplate and patch box (some late production have casehardened iron). Matching serial numbers are
found on most of the components. The barrel has dovetailed blade front and adjustable “squirrel ear” notch rear sights and no visible markings. It also has a tang mounted peep sight. The primer door has the “EDWARD MAYNARD/
PATENTEE/1846” marking, and the upper tang has “C. SHARPS/PATENT/1848.” The forearm has a pewter cap.
CONDITION: Very good with traces of original finish and dark brown and gray patina on the balance mixed with some patches of minor pitting and oxidation. The revarnished wood is very good and has some mild scrapes and
dings and some chipping of the varnish. The very fine brass patch box has an attractive aged mustard yellow patina. Mechanically excellent. This is a fine representative example of one of the rarest Sharps Models. This model paved
the way for future breech loading firearms by proving their utility. It is sure to enhance any antique American firearms collection.
Estimate: 4000 - 6500
BOTH SIDES PICTURED
Collector’s Fact
According to author
Frank Sellers, only 53
were manufactured
in this configuration.
106
LOT 87
Scarce and Desirable U.S. Colt First Model “Walker Replacement” Dragoon Percussion Revolver - Serial
no. 2278, 44 cal., 7 1/2 inch part octagon bbl., blue/casehardened finish, walnut grips. The First Model Dragoon is
an important descendant of the famous Colt Walker revolver which debuted just one year earlier and was meant
for use by the U.S. Mounted Riflemen and U.S. Dragoons and saw use on the western frontier in the antebellum
era and on the battlefields of the Civil War in both Union and Confederate hands. This specific revolver was
manufactured in 1848, the first year of production, and has a German silver blade front sight, “ADDRESS SAML
COLT NEW-YORK CITY” reading from the breech towards the muzzle, “COLT’S/PATENT/U.S.” on the center left side
of the frame (specific to “Walker replacement” revolvers), hammer notch rear sight, and matching serial number
on the frame, barrel, trigger guard, and back strap. The trigger guard and rear grip strap is a reworked Colt Walker,
thus making this one of the Walker replacement Dragoons. This revolver is one of the 300 supplied by Colt to the
U.S. to replace Walker revolvers that had burst cylinders or failed in service.
CONDITION: Good. The revolver has a smooth gray patina with pitting. The cylinder scene is absent. The barrel
marking is legible. The grip straps have an attractive patina with a hand marked “I” on the butt. The grip is fair with
a couple repaired chips near the bottom, a wood plug repair on both sides and an old reapplied coat of varnish.
Mechanically fine. A rare gun with exceptional character.
Estimate: 6000 - 9000

BOTH SIDES PICTURED
LOT 88
Rare Hopkins & Allen Chichester Revolving Pocket Shotgun - Serial no. 1495, 38 CF gauge, 24 1/2 inch
round bbl., nickel finish, walnut stock, hard rubber grips. Manufactured by Hopkins & Allen for the Chichester
Rifle Company of Jersey City, NJ. Top strap marked” PAT. MCH 28, 71 MAY 27, 79” and “38 CAL . CENTRE FIRE”.
Designed for .38 caliber shot shells. Matching serial number on the frame, right grip, barrel, and cylinder. Includes
a shoulder stock with nickel plated furniture.
CONDITION: Very fine overall, retaining 90% original nickel finish, showing some frosting, areas of light surface
spotting, and crisp grip checkering. The stock is also very fine with a few dings and the majority of its nickel
plating. Mechanically excellent.
Estimate: 1800 - 2750
The John Fox Collection
BOTH SIDES
PICTURED
LOT 89
Factory Engraved Hopkins & Allen Ranger No. 2 Spur
Trigger Revolver - Serial no. 6272, 32 RF cal., 2 3/4 inch round
bbl., nickel finish, hard rubber grips. Manufactured around the 1870s-1890s. Near full
coverage floral leaf engraving with accompanying punchdot scrolls. The leaves have
been cut through the finish creating a nice contrast. Matching serial number marked on
the bottom of the barrel, front of the cylinder, inside the right grip,
and left side of the grip frame.
CONDITION: Very fine overall, retaining 85% plus original nickel, some minor flaking in areas,
heavy wear to the cylinder pin, and crisp grip checkering. Mechanically excellent.
Estimate: 1100 - 1600
BOTH SIDES
PICTURED
BOTH SIDES PICTURED
108
LOT 90
Factory Engraved Hopkins & Allen XL No. 3 Spur
Trigger Revolver - Serial no. 1234, 32 RF cal., 2 3/4 inch
octagon bbl., nickel finish, rosewood grips. Manufactured
around the mid-1870s to 1880s. Near full coverage factory floral scroll engraving
mixed with geometric patterns and subtle bestial designs.
CONDITION: Very fine, retaining 80% plus original nickel, scattered areas of
oxidation, and some spots of flaking. The grips are also very fine with a few minor
dings and scratches. Trigger does not always catch, otherwise mechanically
functions fine.
Estimate: 1300 - 1900
LOT 91
Engraved Hopkins & Allen XL
No. 4 Spur Trigger Revolver with Pearl Grips - Serial
no. 768, 38 RF cal., 2 inch octagon bbl., nickel finish,
pearl grips. Manufactured around the 1870s-1890s.
75% coverage factory floral scroll engraving on a
punchdot background with accompanying geometric designs. Matching
serial number marked on the bottom of the barrel (with “A” suffix),
front of the cylinder, and the grip frame.
CONDITION: Very fine, retaining 95% plus original finish on the frame
and barrel with a nicely aged mix of brown and grey patina on the cylinder.
The grips are also very fine with a tiny chip from the left toe.
Mechanically excellent.
Estimate: 1300 - 1900

26”
LOT 92
Special Order Winchester Model 1873 Lever Action Rifle
with Extra Length Barrel and Factory Letter - Serial no.
114148A, 44 WCF cal., 26 inch octagon bbl., blue finish, walnut
stock. Manufactured in 1883 as a third model with integral dust
cover rail and dust cover with grip serrations at the rear. The rifle
is fitted with a special order 26 inch barrel. The accompanying
factory letter lists this rifle with a 26 inch octagon barrel and plain
trigger when received in the warehouse on February 2, 1883
and shipped on June 24, 1883. As explained by George Madis,
“Special lengths, such as [26 inches], are rare in all models. Few
gun buyers were so particular that they would order special
barrel lengths, especially a barrel only two inches longer than
standard” (see “The Winchester Book,” page 133). The barrel is
fitted with a dovetail Lyman beaded blade front sight and an
elevation adjustable buckhorn rear sight and is stamped with the
two-line address/patent dates marking. There is a folding tang
peep sight. The rifle correctly lacks caliber markings. A leather
sling is included. The straight grip stock is fitted with a trapdoor
crescent buttplate. A small collector tag in Mr. Fox hand writing
list this rifle as “W.S. Negus Rancher”. William S. Negus & Co. was a
Marysville, Montana dealer in “groceries, clothing, dry goods and
general miners’ supplies.” According to a period advertisement
the dealer “keep[s] one of the largest stocks of any house in Lewis
and Clarke Country.” Founder of the company, William Negus, also
held interests in Montana mining and operated a 1,200 acre farm
and livestock ranch near Canyon Creek. When he died in 1888 it
was said, “He was rated among the wealthy pioneers of Lewis and
Clarke country and leaves an estate estimated
at from $50,000 to $75,000.”
CONDITION: Very good plus, retaining nearly 40% original blue
finish with the balance a smooth brown-gray patina. Traces of
original case colors remain on the hammer and lever. Traces of
original niter blue remains on the loading gate. The stock wrist
has been period repaired, otherwise the wood is good with
chipping along the grain, dings and scratches. Mechanically
excellent. A very solid example of a special order Winchester
1873, “the gun that one the west”, that certainly looks to have
played the part.
Estimate: 4500 - 6000
Collector’s Fact
Explained by author George Madis, “Special
lengths, such as [26 inches], are rare in all
models. Few gun buyers were so particular
that they would order special barrel lengths,
especially a barrel only two inches longer
than standard”.
The John Fox Collection
109

Classic Antique American Colt Revolvers from the Texas/Mexico Frontier
BOTH SIDES PICTURED
TEXAS RANGERS
The John Fox Collection
LOT 93
Antique California Shipped Colt Model 1878 Frontier Six Shooter Double Action
Revolver with Inscription Attributed to a Texas Ranger and Factory Letter - Serial no.
19802, 44-40 WCF cal., 5 1/2 inch round bbl., blue finish, hard rubber grips. The accompanying
factory letter lists this revolver with a 5 1/2 inch barrel in .44 caliber, blue finish and type of
stocks not listed when shipped to C.D. Ladd of San Francisco, California, on August 15, 1887.
The back strap is inscribed “Co ‘C’” and “CAPT. G.W. ARRINGTON/TEXAS RANGERS NOV 1887.” We
will allow the discerning bidder to make up his/her mind on the authenticity of the inscription. George
W. Arrington (1844-1923) was born John C. Orrick, Jr. in Greensboro, Alabama. At age 16 he joined the
Confederate Army and rode with John S. Mosby’s guerrillas. He fled to Central America in 1867 after
killing a black business owner in his hometown before arriving in Texas in 1870, at which time he changed
his name to George Washington Arrington. He enlisted in the Texas Rangers in 1875 and eventually
commanded Company C until he retired in 1882. Company C operated mostly in the Texas Panhandle for
the purpose of countering acts of violence, vigilantism and land surveying. During his post-Texas Ranger
days, Arrington operated his own ranch where oil was later discovered and served as a county sheriff.
CONDITION: Very good, retaining traces of original blue finish in and around the protected areas,
otherwise the revolver has a mottled brown-gray patina. The replacement grips are also very good with
some minor handling marks and some wear in the checkering. Mechanically needs work as cylinder does
not lock properly.
Estimate: 2500 - 4000
BOTH SIDES PICTURED
110
LOT 94
Desirable Documented Wexell & DeGress Shipped
Colt Model 1877 Thunderer Double Action Revolver
with Factory Letter - Serial no. 31705, 41 Long Colt
cal., 6 inch round bbl., nickel finish, hard rubber grips.
Manufactured in 1881 with the standard markings and features.
The included factory letter confirms the caliber and barrel length, with finish listed as blue, as
well as shipment to Wexell & DeGress of New York and Mexico City, Mexico on 5 September
1881 where it was nickel plated by the retailer.
CONDITION: Fine, retains 50% plus of the period retailer applied nickel plating and traces of
original nitre blue on the trigger with the balance a mixture of grey and brown patina, and
some patches of deep pitting and light oxidation. The grips are also good with moderate
wear, some minor dings, and mostly visible checkering. Mechanically fine.
Estimate: 1800 - 2750

LOT 95
Rinaldo Carr Inspected
U.S. Colt Cavalry Model
Single Action Army Revolver
with Holster Rig and Factory
Letter - Serial no. 131622, 45 LC
cal., 7 1/2 inch round bbl., blue/
casehardened finish, walnut grips.
According to the included factory
letter, this revolver was originally
shipped to the U.S. government
inspector at the Colt plant on March
18, 1890, returned to the factory of
refurbishing (replacement of worn parts,
exterior refinishing and reassembly but barrel not
shortened to Artillery length) and again delivered to
the U.S. government inspector at the Colt plant on October
23, 1895. The barrel has the one-line Hartford address (faint). The frame has
the three-line patent dates marking followed by “US.” Matching serial numbers
are on the frame, trigger guard, back strap and barrel. The cylinder is unnumbered.
Rinaldo Carr’s inspector initials “RAC” and “P” are on the barrel and cylinder. A “K” is
below the serial number on the back strap and trigger guard. Both sides of the grip
are stamped “69” along with an illegible marking. A cartouche (faint) is on the right
side of the grip. Comes with a U.S.cavalry holster rig consisting of a U.S. belt buckle,
Model 1881 holster, Model 1874 Dyer pouch for carbine and cap
pouch for revolver cartridges.
CONDITION: Very good plus as Colt factory refurbished. The barrel and ejector rod
housing retain 30% of the blue finish, the cylinder and grip straps retain traces of
blue finish and traces of case colors remain on the frame, otherwise the revolver has
a smooth brown-gray patina. The grip is very good with high edge wear and some
minor dings. Mechanically needs work as hammer only has three clicks. The holster rig
is good with minor-moderate flex wear and some missing stitching on the holster.
Estimate: 7500 - 11000
The John Fox Collection
111

Colt Single Action Army Revolver - The Most Iconic 19th Century American Firearm - A True Survivor From the Old West
The John Fox Collection
112
SERIAL NUMBER
222
LOT 96
Very Scarce Black Powder Colt Single Action
Army Rimfire Revolver Centerfire Conversion
Serial Number 222 with Mexican Eagle Grip -
Serial no. 222, 44 CF cal., 5 1/2 inch round bbl., nickel
finish, antique ivory grips. This is an example of a
SAA that was originally chambered for the .44 rimfire cartridge
and subsequently converted to .44 centerfire. Only 1,863 SAAs were
chambered in 44 rimfire, which were serial numbered in their own range
from 1 to approximately 1890, and were manufactured for approximately
five years starting in 1875. Colt sold most of the .44 RF production to
South and Central America due to a limited acceptance on the American
market where they saw hard and abusive use. The period shortened barrel
has the one-line Hartford address on top, and the factory blade sight has been
period modified to “half moon rifle style with an 1876 dated Liberty dime sight blade during its time of use. The left
side of the frame has the two-line patent dates marking. The left side of the trigger guard is marked “44 CAL.” The left
side of the grip features a relief carved Mexican eagle.
CONDITION: Very good, retaining 40% period retailer applied nickel plating with the balance a mottled brown-gray
patina. The grip is about good with a chips near the bottom, typical hairline age cracking and some wear to the
carving. Mechanically fine. A very scarce and colorful period modified Colt rimfire SAA that certainly saw frontier use/
action on the open ranges! If only it could talk!
Estimate: 12000 - 18000

The John Fox Collection
114
LOT 97
Historic Winchester Model 1886 Lever
Action .45-90 WCF Rifle Owned by
Millionaire Montana Banker Henry
Elling and Factory Letter - Serial no.
23274, 45-90 WCF cal., 26 inch octagon bbl.,
blue/casehardened finish, walnut stock.
Manufactured in 1888. The accompanying
factory letter lists this rifle with an octagon
barrel in .45-90 caliber and plain trigger when
received in the warehouse on September
17, 1888 and shipped on November 2, 1888.
The rifle is fitted with a W.F. Sheard blade
front sight, an elevation adjustable rear
sight, and a folding tang peep sight. The
top barrel flat is stamped with the two-line
address/patent dates marking ahead of the
rear sight and “45-90 WCF” at the breech.
The straight grip stock is fitted with a solid
crescent buttplate. This rifle belonged to
successful Montana banker Henry Elling.
An accompanying handwritten letter of
provenance by George A. Smith of Hamilton,
Montana, states he obtained “this gun from
descendants of Henry Elling.” Henry Elling
(1842-1900) was born in Prussia, and he,
along with a younger brother, came to the
United States in 1857, settling in Missouri
with an older brother after the death of both
parents. His first business venture in Montana
was a small general goods store in Virginia
City in 1864. In 1873, he opened a banking
house. This started a prosperous life long
career in Montana banking. He assisted in
the organization of several banks, became
the president of six banks, and was elected
as the director of the State National Bank
of Miles City. By all accounts his banking
enterprises were very fruitful, earning him the
respect from both the community and fellow
bankers. He also had interests in ranching,
mines, mills and the Gallatin Light, Power
and Railway Company that held the street
railway and electric lighting franchisees
of the city of Bozeman. Through hard
work and perseverance Elling became
a versatile frontier entrepreneur highly
respected in the financial and business
world of Montana. His efforts showered
him with tremendous wealth, eventually
becoming the richest man in the county.
“When he came to Montana he did not
have dollar, and he died several times
a millionaire,” reported a local period
newspaper at the time of his death.
Several accompanying original documents
related to Elling’s business enterprises
include an 1872 dated Henry Elling retailer
dealer receipt, four receipts from the retailer
Elling, Knight & Buford circa 1895, two
financial records on Henry Elling, Banker
letterhead and signed by Elling, a canceled
Henry Elling, Banker check, three financial
statements on Banking House of Henry Elling
letterhead, three financial statements on
Elling State Bank letterhead, and canceled
Banking House of Henry Elling check
signed by Elling.
CONDITION: Very good plus, retaining
40% original blue finish with the balance
a smooth brown patina. Traces of original
niter blue remain on the loading gate.
The remaining surfaces retain patterns of
original case colors. The wood is very good
with a couple hairline stress cracks at the
upper tang, shallow pressure mark on the
right side of the forearm and minor dings
and scratches. Mechanically excellent. A
Model 1886 linked to millionaire Montana
banker showing true frontier use and care.
Provenance: The John Fox Collection
Estimate: 5000 - 8000
Henry Elling

The John Fox Collection
116
LOT 98
Montana Shipped Antique Colt First Generation Single Action Army Revolver with Spanish-American War/
Philippine Insurrection History and Factory Letter - Serial no. 163981, 38 LC cal., 7 1/2 inch round bbl., blue/
casehardened finish, walnut grips. Manufactured in 1896. The accompanying factory letter lists this revolver with a 7 1/2
inch barrel in .38 Colt, blue finish and wood stocks when shipped to A.L. Babcock in care of John R. Miller, Billings,
Montana, on January 15, 1896. The barrel is stamped with the one-line Hartford address on top and “38 COLT” on
the left side. The frame has the two-line patent dates marking along with a circled Rampant Colt. The left side of
the grip is hand marked “MAJ/John R. Miller/1 MONT INIY.” the right side of the grip is hand marked with the initials
“BMK.” Faint markings are on the bottom of the grip. Matching serial numbers are on the frame, trigger guard, and
back strap. Albert L. Babcock (1851-1918) was an influential Billings, Montana merchant and banker. A native of
Albany, New York, Babcock settled in Montana in 1882 and started the hardware store Babcock & Miles Hardware in
Billings that was later converted into the stock company A.L. Babcock Hardware Co. He organized the Yellowstone
National Bank where he was president until his death in 1918 and built the Yellowstone Valley flouring mill. He served
as Yellowstone County Commissioner from 1885 to 1889 and State Senator from 1894 to 1898 as well as served on
the military staffs of Montana Governors Benjamin White, Joseph Toole and John Rickards with the rank of colonel.
He personally financed the building of the Babcock Theater after the Opera House in Billings burned down in 1906.
John R. Miller was from Helena, Montana, served in the First Montana Infantry during the Spanish American War
with the rank of major (see The Spanish American Centennial Website, www.spanamwar.com/1stmontanaroster.
htm). The First Montana Infantry was the only Montana regiment to take part in the Spanish-American War. The unit
was mustered in at Helena in early May 1898 with 48 officers and 976 enlisted men, arrived in Manila in August, and
remained in the Philippines to fight the Philippine-American War before returning to the U.S. in September 1899.
The regiment participated in the defence of Manila and operations against insurgents north of Manila. Engagements
included Caloocan, Tuliajan River, Polo, Marilao and Meycauayan, Guiguinto and Bocaue, Malolos, Bagbag River,
Calumpit, Apalit, Santo Tomas and San Fernando. Miller was wounded in the shoulder (see “Annual Reports of the
War Department for the Fiscal Year Ended June 30, 1899” on page 427). He fully recovered from his wound that was
described as “severe” by a local report and returned home to a hero’s welcome “with a record which is as brilliant as that of any other officer of his rank
in the army,” proclaimed a local newspaper. In 1900, adventurous spirits Miller and fellow Helena resident Orrin Jackson successfully traveled from the
Klondike to Helena on bicycles, but would “not recommend the bicycle as a means of conveyance in the wilds of Alaska.” At the time, Miller was a partner
in the Holmes Hardware Co.
CONDITION: Fine, retaining 70% original blue finish, strong traces of original case colors in the protected areas on the frame and 50% original case colors
on the hammer, otherwise the revolver has a smooth brown-gray patina. The grip is also fine with high edge wear, some minor handling marks and most
of the original finish remaining. Mechanically excellent.
Estimate: 8000 - 12000

Historic Winchester 1876 Rifle Attributed to One of the West's Most Successful Lawmen
The John Fox Collection
118
LOT 99
Winchester Model 1876
“Centennial” Lever
Action Rifle Attributed
to U.S. Deputy Marshal
Henry “Heck” Thomas
with Factory Letter -
Serial no. 15924, 45-60
WCF cal., 28 inch octagon
bbl., blue finish, walnut
stock. An included letter
sent to Bill Isaacs of Ely,
Nevada, lists this rifle
by serial number and
indicates that it had a
tag on it noting it was
“traded from Dep. Marshal Henry (Heck) Thomas, Lawton, Okla., 1901 (from George Sr. collection. George Sr. &
Heck Thomas served under command of Gen. Ed. ? Thomas, 35th Georgia Volunteers, as youngsters...[sic]” and
became part of the writer’s father’s estate and were left to Isaacs in his will. Also includes a binder of information
on Thomas. Henry Andrew “Heck” Thomas (1850-1912) was born in Georgia and served as a courier for the
Confederacy during the Civil War and even escorted Union General Philip Kearny’s horse and gear through the
lines under orders from General Robert E. Lee when Kearny was killed at the Battle of Chantilly. He moved to
Texas in his mid-20s and worked as a railroad guard and detective. He and a posse tracked down and killed Texas
outlaws Jim and Pink Lee of the Lee Gang in 1885. He was then appointed as a U.S. Deputy Marshal first in 1886
to 1892 under Judge Isaac C. Parker, popularly remembered as “The Hanging Judge.” While judge of the United
States District Court for the Western District of Arkansas based in Fort Smith, Parker sentenced 160 people to
death, and 79 were executed, mostly by hanging despite Parker’s personal dislike of the death penalty. One
of the secondary sources in the binder notes that 65 of Parker’s deputies died fighting outlaws while he was
a judge in 1875-1896. Thomas and fellow deputies Chris Madsen and Bill Tilghman were known as “The Three
Guardsmen” and became famous for their efforts to bring law and order to Indian Territory. The three men tracked
down hundreds of outlaws, killed several in shootouts, and helped bring down the Wild Bunch and the Dalton
Gang. The National Park Service indicates Thomas “captured and killed several members of both gangs.” The
“Encyclopedia of Frontier Biography” calls Thomas “one of the great lawmen of the southwest” and indicates he
“invariably picked the most dangerous desperadoes” to track down in part they had the largest bounties and also
indicates he was wounded at least six times in gunfights. Depending on the source, Thomas either personally
wounded or killed Bill Doolin of the Wild Bunch when he led a posse to track Doolin down before he could flee
the country. Thomas claimed credit for the fatal shot in a letter to Tilgham. The latter had previously captured
Doolin, but he managed to escape before he was executed. In 1902, Thomas became chief of police in Lawton.
He reprised his role as a lawman for the silver screen in the early short film “The Bank Robbery” from 1908 which
was directed by another of his former “Guardsmen”, Tilghman, who also served with Roosevelt’s Rough Riders.
The rifle dates to 1881 and is a late Second Model with a German silver blade front sight, notch and folding
ladder rear sight, the two-line address and patent marking ahead of the rear sight, “CAL.
45-60” on top at the breech, “45-60” on the elevator, screw fastened guide rail, dust cover with
serrations at the tail and no thumb piece, “Model. 1876.” on the upper tang, the serial number in script on the
lower tang, and smooth stock and forearm. The accompanying factory letter lists this rifle with an octagon barrel
in .45-60 and plain trigger when received in the warehouse on August 19, 1881 and shipped the next day.
CONDITION: Fine with 40% original blue finish remaining (strongest on the barrel), smooth gray and brown patina
on the balance, some minor oxidation/pitting, general mild scratches and marks from use, and distinct markings.
The stock and forearm are also fine. The former has mild wear from handling and use including some small dents
and scratches. The latter is slightly undersized and has some small chips and slivers absent from the edges of the
wrist, general minor scratches and dings, and mostly smooth oiled finish. Mechanically fine. This is an attractive
antique Winchester attributed to one of the West’s most successful lawmen “U.S. Deputy Marshall Henry “Heck”
Thomas, one of the adversaries of the infamous Doolin Gang and the Wild Bunch and a contemporary of some of
the West’s most famous characters.
Estimate: 18000 - 30000

LOT 100
Historic and Fine, Inscribed and Factory Engraved Merwin Hulbert & Co. Open Top Pocket
Army Single Action Revolver with Carved Mexican Eagle Grips - Serial no. 1770, 44 WCF cal., 3
1/4 inch round bbl., nickel finish, antique ivory grips. Manufactured in the 1880s. Near full coverage
factory floral engraving, complimented by the punchdot scroll and geometric patterns. The left side of
the frame shows a scene of two ships sailing on the ocean. The flowers have enamel dots inlaid at their
centers. The right grip panel is carved with a Mexican Eagle holding a snake. The top of the barrel is
inscribed “C. Capetillo”. The Capetillo family arrived in Mexico from Spain in the late 19th century, since
then the family has maintained a long tradition as matadors. This revolver was more than likely owned
by a member of this branch of the family, particularly with the wonderful carved Mexican Eagle grips.
Matching assembly numbers on the cylinder, barrel, and under the left grip panel.
CONDITION: Excellent, retaining 85% plus original nickel finish, minor handling evidence, a few areas
of light pitting on the barrel, and most of the enamel dots are missing. The grips are very fine with a
few minor cracks and some shrinkage. Mechanically excellent.
Estimate: 6000 - 9000
The John Fox Collection
121

Two Contrasting Handguns both with Ties to Montana - From the Collection of John Fox
The John Fox Collection
122
LOT 101
DWM American Eagle
Model 1900 Luger Semi-
Automatic Pistol with
Joseph Sullivan Holster - Serial
no. 10234, 7.65 mm Luger Auto cal., 4
3/4 inch round bbl., blue finish, walnut grips. Made by
DWM expressly for the American arms market with the
signature “American Eagle” on top of the chamber. Fixed
sights, an early pattern Luger bolt and toggle assembly
with the flat top bolt, unmarked extractor, and dished toggle knobs with spring-loaded toggle lock.
Serial numbers are commercial in layout, and except for the unmarked magazine base are externally
matching, and the “GERMANY” import mark is present on the front of the frame. Equipped with straw
finished small components, a grip safety, checkered grips and a correct nickel bodied magazine with a wood
base. The included belt holster is marked “JOS. SULLIVAN/Ft. BENTON”. Founded in 1881 the saddlery firm of
Joseph Sullivan was the longest running and best known of the Fort Benton, Montana saddle works operating
from the 1880s until 1940. Sullivan saddles were very popular, in the words of Montana author and historian Joel
Overholser, “Sullivan saddles went as far North as Edmonton and South to the Colorado line”.
CONDITION: Fine with 75% original blue finish remains with areas of high point and edge wear, some visible pin point spotting,
and mixed gray patina on the grip straps. The grips are also fine with moderately worn checkering and a few small dings.
Mechanically excellent. Holster is good with scuffs and scratches overall, tight stitching, visible age cracking, and some small
holes worn at the tip.
Estimate: 3000 - 5000
LOT 102
Documented Montana Shipped Colt
Model 1903 Pocket Hammer Semi-
Automatic Pistol with Factory Letter and
Furstnow Holster - Serial no. 18425, 38
Colt auto cal., 4 1/4 inch round bbl., blue finish, hard rubber grips. The included
factory letter confirms the model, serial number, caliber, finish, and April 4, 1905
date of shipment to Missoula Mercantile Company of Missoula, Montana. The
Eddy-Hammond Company, more commonly known
as the Missoula Mercantile dominated wholesale and
retail trade in the Missoula area from 1885 to 1920, and
was known as the “go to” shopping center in the town.
Across its three floors of space The Mercantile offered
hardware, plumbing supplies, local groceries, furniture,
farm equipment, and of course guns. Over the years
stories about The Mercantile have ranged from urban
legends of Ringling Brothers elephants being kept in
the basement when the circus was in town, to the true story of the passage in the
basement used by John Wayne to move between the store and the nearby Florence Hotel when he was in Missoula.
The name was changed in 1978 to The Bon Marche, and in the early 2000s it became a Macy’s. The building was closed in 2010,
and demolished for new construction in 2017. Standard blade front and round top rear notch sights, two-line address on left
side of slide, Rampant Colt behind the serrations, caliber marking on the right, smooth nitre blue trigger, and knurled round
hammer spur. With checkered hard rubber grips with “COLT” banners at the top. Includes an Albert Furstnow leather holster.
Furstnow was one of the premier leather workers in Montana and an influence on another famed Montana saddle and holster
maker Edward Bohlin. Based out of Miles City, Furstnow would eventually branch out to California where his companies saddles
and gun leather would go on to be used in Hollywood productions
CONDITION: Fine. The pistol retains 50% original high polish blue finish with a gay patina on the balance, scratches on the right
side of the slide from the holster spring, and areas of a mixed brown patina on the grip frame. Shadows of original case colors
remain on the hammer with the balance aged to a dove gray. The grips are very fine with mildly worn checkering, and some very
small scratches. Mechanically excellent. The holster is fine with some scuffs and scratches, tight stitching, some mild verdigris on
the rivets, and partially exposed metal spring on the inside of the retention loop.
Estimate: 2500 - 3750
BOTH SIDES PICTURED
BOTH SIDES PICTURED

LOT 103
Engraved and Silver Accented Joshua Yous Percussion American Long Rifle Inscribed for G.S. Zeigler - NSN, 45 cal., 39 inch octagon bbl., blue/
casehardened finish, maple stock. Built by Joshua Yous (1827-1905) of Greencastle, Pennsylvania, active as a gunmaker primarily around 1850-
1860. The side plate is inscribed “G. S. Zeigler,” possibly George S. Zeigler (1827-1857), a miller who lived in nearby Leitersburg, Maryland. The
rifle has “J. YOUS.” stamped on top of the heavy octagon barrel, traditional blade and notch sights, adjustable double set triggers, a “JS & S/
WARRANTED” lock with bird and scroll patterns, German silver furniture, and over twenty silver accents along the forend, wrist, and left side of the
butt in a variety of shapes including a star, moon, and hearts. The stock also has carved “gutters” between the pins on the forend, a low cheek rest,
and some incised lines and scrolls on the butt. Ramrod absent.
CONDITION: Good with mottled gray and brown patina and mild oxidation/pitting on the lock and barrel, aged patinas on the accents and
furniture, an absent accent plate on the left side of the barrel tang, moderate scrapes and dings on the stock, wood worn to a lighter tone on the butt and
towards the forend tip, dark finish and sections of attractive flame figure, and generally distinct markings and engraving. The lock won’t hold half or full-cock.
Estimate: 1800 - 2750
LOT 104
Scarce Engraved Richard Constable Half-Stock Target Rifle - NSN, 52 cal., 30 1/4 inch octagon bbl., brown finish, walnut stock. Brass
blade front and notch rear sights on an octagonal barrel and “PHILADELPHIA” marked breech plug. Scrolled engraved tang, lock plate and
brass trigger guard with a stag in a field scene, brass forend cap, and hammer with sculpted fish head. Script engraved “R. Constable” on the lock plate.
Four-piece brass patch box engraved with a man slaying a lion and the words “Sic Sempter Inimicis” (Thus always to enemies). The silver cheekpiece inlay is engraved
with a man shooting a bow and arrow. Half-stock with checkered pistol grip area, silver initial plate on left stock flat, single trigger, single key with silver engraved plates,
ramrod with brass tip and fitted with a brass buttplate.
CONDITION: Very good plus with the metal surfaces exhibiting a balance between a mottled brown and mottled silver patina. The brass has a smooth aged patina with
some of the engraving beginning to fade. The stock is very fine with some minor handling marks. Mechanically fine.
Estimate: 1900 - 3000
LOT 105
E. Loomis Percussion Half Stock Percussion “Boy’s” Rifle - NSN, 32 cal., 24 1/4 inch octagon bbl., blue/casehardened finish, walnut stock. Earl Loomis (1798-
1872) was a prolific gunmaker active in East Hamilton, NY, and also reported from nearby Hubbardsville. This rifle was likely built for a boy or woman given its
short 12 3/4 inch length of pull and overall size. The nickel-silver squirrel on the buttplate indicates its intended quarry. It has a German
silver blade front sight, fixed notch rear sight, “E. LOOMIS” surrounded by crosses on the top of the barrel, a folding rear peep sight, scroll
patterns on the lock, plain trigger, pewter forend cap, nickel-silver accents, hooked brass trigger guard, and iron butt and toe plates.
CONDITION: Fine with traces of original finish and otherwise brown patina, light pitting, minor vice marks, aged patina on the brass and
accents, and darkened pewter cap. The stock is fine other than a crack between the trigger guard finial and nose of the lock and faint
tension crack in the left flat. Mechanically fine.
Estimate: 1400 - 2250
124
LOT 106
H.W. Warner Mule Ear Percussion
Over/Under Combination Gun - NSN,
42 cal., 31 inch round bbl., blue finish, maple stock. H.W. Warner was active in Liverpool, Ohio, in and around 1860. Features
a .42 caliber rifled barrel with blade and adjustable sporting sights and “H.W. WARNER./LIVERPOOL/OHIO” markings over an
approximately 20 gauge smoothbore barrel, ramrods mounted on each side of the barrels, unmarked lock, brass furniture,
and smooth maple stock with shallow cheekpiece. Only one hammer can be cocked at a time.
CONDITION: Very good with dark brown patina, mild oxidation, aged patina on the brass, stuck patch box door, thin cracks
and chips near the lock, flame figure, and scattered minor marks and scratches. Mechanically fine.
Estimate: 1300 - 1900
LOT 107
J. Harder Percussion Swivel
Breech Combination Gun - Serial
no. 195, 45 cal., 31 3/4 inch octagon bbl., blue/casehardened/bright finish, walnut stock. Manufactured by Jacob Harder’s shop
in Lockhaven, Pennsylvania, around 1860-1888. Many of his guns are multi-barrel rifles and combination guns of various configurations, including some
breechloaders, but swivel breeches are comparably rare. It has blade and notch sights, “J. HARDER/LOCKHAVEN PA,” scroll engraving, and three bands on each
barrel (one smooth and one rifled); “195” on the right side of the rifled barrel, and ramrods mounted on each side. The lock and
breech components have scroll patterns. The stock furniture is plain German-silver and includes two bucks on the left.
CONDITION: Good with dark brown patina, vice marks, and light oxidation on the barrels, gray and brown patina on the other
iron components, and aged patina on the German-silver. The stock is fair with some wear and faint cracks around the lock and
tang mortises, smoothed checkering, and minor scratches and pressure marks. It will drop the hammer from half-cock and some
times catches, but it is, otherwise, mechanically functional.
Estimate: 1100 - 1600

BOTH SIDES PICTURED
LOT 108
Attractive Historic
Documented Sharps Model 1874 Sporting Rifle
Purchased by a New York County Sheriff with Mogg Telescope Sight and Factory Letter - Serial no.
C,54533, 40 cal., 28 inch octagon bbl., blue/casehardened finish, walnut stock. The accompanying factory letter lists
this rifle with a 28 octagon barrel in .40 2 1/4 inch caliber, double triggers, globe and peep sights and oil finished stock when
invoiced on July 6, 1875 to merchant E.G. Chase of Geneseo, New York, who received the rifle at discounted price. A second
included letter from Richard Labowskie explains that based on correspondence with Sharps, E.G Chase received the discount
after informing Sharps he was “able to sell quite a few Sharps” and Chase purchased this rifle for Elijah Youngs (1825-1895), who
was the sheriff of Livingston County, New York. Labowskie states that he purchased the rifle from Gary Quinlan of Pennsylvania.
The original barrel sights have been removed to accommodate the addition of the 34 inch Mogg telescope sight. The Mogg sight is mounted in the
front and rear sight dovetails, and the peep sight has been removed (no filler screws). The barrel has the Hartford address, and the action has the C.
Sharps 1849 patent date and double set triggers. The forearm has a pewter cap. Matching serial number on the upper tang, inside of the forearm
(“533”) and bottom of the barrel (factory reportedly remarked due to a stamping error). Period sources indicated that Youngs was the sheriff of
Livingston County as well as a merchant and farmer.
CONDITION: Very good plus, retaining 30% faded original blue with the balance a mottled gray patina. The attractively silvered out action retains patterns of original case colors, otherwise
mostly a smooth dark gray patina. The refinished wood is fine with some minor handling marks. The telescope sight has hazy optics. Mechanically excellent.
Estimate: 4500 - 7500
BOTH SIDES PICTURED
LOT 109
Very Fine Remington Model 1 1/2 Rolling Block
Sporting Rifle - Serial no. 2799, 22 RF cal., 28 inch octagon
bbl., blue/casehardened finish, walnut stock. Manufactured from 1888 to 1897.
German silver front blade, adjustable semi-buckhorn rear and mid range tang mounted peep
sights. The top barrel flat is marked “REMINGTON ARMS CO ILION, N.Y.” ahead of the
rear sight with the six line patent marking on the left side of the receiver. The matching serial
number is marked on the lower tang and bottom barrel flat under the forearm. The bottom
barrel flat is also marked “22” ahead of the forearm. Blue barrel, hammer and breechblock and
casehardened receiver. Smooth walnut forearm and straight grip stock with forend cap and
crescent buttplate.
CONDITION: Very fine. The barrel retains 70% original blue finish mixed with smooth plum
patina. The breechblock and hammer retain 95% of the original bright nitre blue finish. The
receiver retains 80% of the original vivid case colors with fading on the trigger guard and a
smooth silver-gray on the lower tang. The buttplate is a mix of dark original case colors and
smooth silver gray patina. The wood is also very fine with almost all of the original varnish and
showing a minor chip on the rear edge of the forearm and scattered minor dents and dings. The markings are crisp and clear.
Mechanically excellent.
Estimate: 4500 - 6500
LOT 110
Serial Number 1 P. A. Altmaier’s Patent Repeating
Mountaineer Lever Action Rifle - Serial no. 1, 44 cal., 28 1/4
inch octagon bbl., blue/nickel/black finish, walnut stock. This rifle was
designed by Peter A. Altmaier (b. 1828 in Bavaria) who came to the U.S. in 1850 after
training as a gunsmith and later manufactured firearms, including repeating rifles of his own
design and cane guns, in Harrisburg, Pennsylvania. The rifle has a German silver blade front sight, notch rear
sight, “No. 1 1884.” and “P.A. ALTMAIERS./PAT. REPEATING MOUNTAINEER/RIFLE. HARRISBURG. P.A.” on top of
the barrel at the breech, simple scroll patterns on the sides of the frame, and a checkered buttstock.
CONDITION: Fair. Part of the breech mechanism and the buttplate are absent, the steel
components have dark brown patina and moderate oxidation/pitting, the magazine tube and
action have a mix of nickel and black paint, and the somewhat loose buttstock has some minor
cracks and dings. Buttplate is absent. All of Altmaier’s firearms are very rare. A truly unique
American firearm!
Estimate: 1600 - 2500
125

BOTH SIDES PICTURED
The John Fox Collection
LOT 111
Desirable Judson Brennan Engraved, Carved, and Silver Accented Contemporary Flintlock
American Long Rifle - NSN, 54 cal., 45 inch octagon bbl., antiqued finish, curly maple stock. Rifles by
Judson “Jud” Brennan are among the most desirable contemporary American muzzle loaders. His rifles
have the look and feel of genuine antique arms. At first glance, this rifle certainly appears to be over
200 years old thanks to masterful work crafting the gun just like an original and then using aging
techniques to give it a very authentic antique appearance. Based on the lack of serial numbers,
Brennan indicated this rifle was built before he moved from Michigan to Alaska in 1985. The barrel
is signed “Judson J Brennan” on a silver panel with engraved floral accents, and the patch box has an
oval silver panel signed “I/Brennan/GUNMAKER.” The barrel has engraving and a silver band at the
muzzle, a silver blade front sight, traditional low notch rear sight with light engraving on the base,
floral engraving around the signature panel and at the breech, a broad silver band at the breech, and
additional engraving on the upper tang. The lock has scroll and border engraving. The furniture is
iron and is engraved to match and accented by additional silver panels and bands. The patch box is opened using a silver button in
the toe plate. The stock has scroll carving accented by wire and engraved silver inlays, a scroll engraved silver forend cap, silver “repair” strips on the
wrist adding to the antique look, a silver cheek piece plate inscribed “Liberty,” and an engraved silver vent pick holder (no pick).
CONDITION: Very fine with dark brown “patina” on the iron, aged patina on the silver, crisp markings and engraving, some small slivers and chips absent to
add to the aged look, minor cracks, and excellent authentic “Golden Age” appearance overall. Mechanically excellent.
Estimate: 4500 - 6500
LOT 112
O. A. Sweeney Gunsmith Marked
Kentucky Style Percussion Swivel Breech Rifle with J. Demuth Lock - NSN, 40 cal., 37 inch octagon bbl., brown finish,
maple stock. One of the barrels is marked “O.A. SWEENEY 2612 OLIVE GUNSMITH” along the brass channel on the opposite side of
the ramrod channel. Similar Sweeney markings are repeated inside the patch box. There is evidence of an O. A. Sweeney at that address
in St. Louis, Missouri in the 1940s (write believes this to be the individual responsible for the aforementioned 20th century added markings).
The two rifled octagon barrels are connected by wedges and brass ribs on either side, one mounted with pipes for the wooden ramrod. The lock
is marked “J. DEMUTH/WARRANTED” and has light floral engraving. A Jonathan Demuth is recorded as working in Bushkill, Pennsylvania in 1828.
The plate opposite the lock has similar floral scroll engraving and a blued lever which allows the barrels to swivel. It is fitted with a curly maple
Kentucky style stock with ornate brass patch box silver inlaid escutcheon on the wrist and silver inlaid compass-type star on the cheek piece.
CONDITION: Very good, showing mostly an even brown patina and some scattered light pitting with crisp markings and engraving. Markings
have been added as described above. The brass and silver show an attractive antique patina overall and the lower screw retaining the brass ribs is broken and
loose. The sanded and revarnished wood is also very good with visible repairs on the cheekpiece comb, some white speckling, some minor handling marks, and
nice figure. Mechanically excellent.
Estimate: 5500 - 8500
BOTH SIDES PICTURED
126
BOTH SIDES
PICTURED
LOT 113
Fine Historic “John H. Baldwin”
Marked Carved/Incised
Powder Horn with British Coat
of Arms - This horn measures 10
inches straight across from spout
plug to base plug and is marked
“John-H-Baldwin” and has a ship
with a British flag and the royal
coat of arms. The spout
plug threads into the
nicely shaped, multistep
spout which has a scalloped border where it meets the body.
No information is available about the history at this time.
CONDITION: Very good with a fine, attractive appearance, some red stain,
and mild wear including some minor chips near the base plug.
Estimate: 3000 - 4000
LOT 114
Massive Powder Horn Marked “1693 John Loving
Esq.” - This massive horn has a brass base plug
inscribed “1693+IOHN LOVING ESQ.” The spout is
brass and has a hinged clasp. The length is 19
inches from the main hinge straight across
to the base plug. The body has various
faint markings along with an “11” brand.
A horn of this size could carry powder
for a whole group of men or be used for
priming artillery.
CONDITION: Very good with mild overall wear,
some rough areas on the horn, dark aged patina on
the brass, crisp inscription, and some areas
of dark lacquer.
Estimate: 2000 - 3000

LOT 115
Scarce and Excellent Factory Cased Colt Model 1849 Pocket Revolver - Serial no. 202056, 31 percussion cal., 6 Inch bbl., blue/
casehardened finish, varnished walnut grips. This is a scarce and excellent example of a large trigger guard variant Colt Model 1849
Pocket revolver that was manufactured in 1862. The revolver has the scarce six-shot cylinder roll-engraved with the Stagecoach Holdup
scene. The barrel and cylinder have the Colt commercial blue finish and the loading lever, frame and hammer are color casehardened.
The brass trigger guard and back strap have a silver-plated finish. The one-piece walnut grip has a high polish piano finish. Standard
markings on the barrel and frame. The full serial number is located on the bottom of the frame, trigger guard, back strap and
cylinder. The partial serial number “2056” is stamped on the loading lever. All of the visible serial numbers match. The revolver
is accompanied by a factory case and a full set of Colt accessories. The American style mahogany case has five compartments
and is lined with crimson velvet. The case contains: (1) 250 count tin of Ely percussion caps with green paper label and blue
paper wrapping, (2) blued, double cavity, bullet mold for round balls and conical bullets with “COLT’S PATENT” stamped
in two lines on the sprue cutter and “31PKT” on the side of the right block, (3)
pocket pistol powder flask embossed with the eagle and shield motif and
“COLTS/PATENT” on one side, (4) L-shaped, combination screw-driver and
nipple wrench, (5) sealed packet of six Hazard’s Combustible Envelope
cartridges for “Col. Colt’s Patent Revolving Pocket Pistol”, (6) key, and (7)
assortment of cast .31 caliber balls and conical bullets.
CONDITION: Excellent plus. The revolver retains 85% plus of the blue
and casehardened finish with delicate flaking on the high spots of
the barrel and the right side of the lug. The cylinder has nearly all of
the Stagecoach Holdup scene and retains 90% plus original blue . All of
the cylinder safety pins remain and the percussion nipples show only light
flash pitting. The loading lever, frame and hammer have 90% of the case
colors. The silver plating on the frame and back strap has darkened to
an attractive “black” with 85% plus of the
plating. The grip is excellent and retains 95%
of the varnished piano finish with very minor
handling marks. The action is tight and functions
perfectly. The case is fine overall with a few minor
handling and storage marks. The lining on the lid has
faded but shows minimal wear and the bottom is dusty with
compression marks. The accessories match the gun and case
for overall condition. This is an excellent example of a Civil War
period, factory cased, Colt Model 1849 Pocket revolver with
scarce six shot cylinder in investment quality condition.
Estimate: 5500 - 8500 127

Investment Quality Historic First Edition Elizabeth H. Colt Signed & Inscribed Copy of “Armsmear”
Elizabeth
H. Colt
Colonel
Samuel Colt
128
LOT 116
Rare and Historic First Edition
Elizabeth H. Colt Signed and Inscribed
Copy of “Armsmear” Given to Colt
Factory Engineer Horace Lord - Offered
here is a first edition copy of Samuel Colt’s
memoriam book “Armsmear”. This copy is
inscribed on the cover page “Mr. Horace
Lord./with the regards of/Mrs. Elizabeth
H. Colt.” as well as “Armsmear-/Christmas
1866.” Horace Lord was a friend to Samuel Colt and worked under him
as an engineer for many years, both before and after Colt’s death. Lord
was recruited from the employ of Eli Whitney Jr. by Colt and became the
right-hand man to Elisha K. Root. He was also a pallbearer at Colt’s funeral,
demonstrating the close connection with the Colt family he must have had,
likely the reason for this copy of his memoriam signed by Colt’s widow. Lord
designed and patented improvements to the breechloading conversion
rifle as well as design changes for the cylinder release on swing out cylinder
revolvers, namely the Colt Model 1889 New Service Revolver. Also included
is a copy of a letter stating that the book is no longer available for public
purchase and is only available via private distribution, a copy of a Steroview
card of Armsmear, and a paper trail of ownership back to 1968.
CONDITION: Excellent, showing very little wear for its advanced age. A
couple small tears are present on very few of the pages inside the book. The
cover shows very little wear to either the leather or the gold inlay with just
a few small scuffs on the spine. Elizabeth Colt’s signature is clearly legible
as is the rest of the inscription. A truly wonderful piece of Colt history
inscribed to a long time Colt engineer.
Estimate: 3000 - 5000

SIMILAR EXAMPLE
PICTURED AND
DESCRIBED IN THE
BOOK OF COLT
ENGRAVING BY
WILSON
LOT 117
Desirable Factory Engraved Colt Pocket Navy Percussion Revolver with
Exceptional Mexican Eagle “Tiffany” Grip - Serial no. 17610E, 36 cal., 5 1/2 inch
octagon bbl., brown finish, brass grips. The details of the serial numbers and dates of
manufacture of this model remain disputed. Colt currently lists this revolver as a “Pocket Pistol of Navy Caliber” manufactured
in 1863 within the same range as Police revolvers. However, the Colt Collector’s Association now lists this model as manufactured
from 1865 until 1872 within a serial number range of 1-22000 suggesting this revolver dates closer to 1870. This revolver was most
definitely engraved by master engraver Gustave Young. It is engraved with the classic late floral vine scroll engraving known to
sometimes be used by Young and has the wolf motif and five dots suggesting five ten hour days of engraving in Young’s shop. It also
has “COLTS PATENT” hand engraved on the left side of the frame in the style Young employed. The grip has an eagle, snake, and cactus
pattern based on the coat of arms of Mexico, silver cap. A very similar engraving pattern is shown on a factory converted Pocket Navy
on page 152, serial number 17613, just three serial numbers after this revolver, on page 152 of “The Book of Colt Engraving” by Wilson,
and the same grip pattern is seen on a Gustave Young engraved Model 1862 Police on page 99 and on
page 160 on another Model 1862 Police and multiple revolvers in the “Tiffany Grips” chapter. These grips
were shown in Schuyler, Hartley & Graham’s catalogs on a revolver with the same style of engraving (see
page 143 of “Steel Canvas” by Wilson). Additional features include the New York barrel address, matching
serial numbers, “E” near the main serial numbers, and “36 CAL” on the front and rear of the
trigger guard on the left.
CONDITION: Very good revolver with crisp engraving, smooth gray patina, light pitting on the cylinder,
bright trigger guard and exceptionally fine original grip, aged patina on the silver cap, and mild overall
wear. Mechanically fine. A fine representative example of both factory engraving and much
sought after Tiffany grip.
Estimate: 14000 - 22500
129

BOTH SIDES PICTURED
LOT 118
Fine Colt Burgess Lever Action Rifle with Factory Letter -
Serial no. 5700, 44-40 cal., 25 1/2 inch round bbl., blue finish, walnut
stock. The Colt Burgess rifles and carbines were only available from
1883 to 1885, and reportedly 6,403 were manufactured. They were designed by
Andrew Burgess who held 894 patents by the end of his life. It has long been rumored that
Colt and Winchester came to an agreement that Colt exit the lever
action market and Winchester would not release
a revolver. There seems to be little other reason for Colt to have discontinued these
fine repeating arms so quickly after they introduced them. The Burgess is arguably more
advanced and refined than the Winchester Model 1873. The included factory letter list
this rifle with .44-40 chambering, round barrel, and blue finish when shipped to Hibbard,
Spencer, Bartlett & Co. of Chicago on February 22, 1884. This was a 10 gun shipment. The rifle
has a German silver blade front sight, an elevation adjustable rear sight, the two-line address/
patent dates marking stamped on top of the barrel ahead of the rear sight, a Rampant Colt stamped
on the left side of the frame, “BURGESS’S PATENT” marked lever, and the serial number on the lower tang. The straight grip buttstock is fitted with a trapdoor
crescent buttplate (cleaning rod not included).
CONDITION: Fine. The barrel and magazine retain 30% plus original blue finish and the frame retains 40% original blue finish with the balance a smooth brown-gray patina. Traces of
original case colors remain on the hammer and lever. 25% original niter blue remains on the bolt and loading gate. The wood is also fine with a short hairline stress crack at the lower
tang and some minor dings and scratches. Mechanically excellent.
Estimate: 6000 - 8000
BOTH SIDES PICTURED
130
LOT 119
Colt Lightning Medium Frame Slide Action Rifle - Serial no. 52912, 32-20
WCF cal., 26 inch octagon bbl., blue finish, walnut stock. This Colt Lighting Slide Action Medium Frame
Rifle was manufactured in 1891. This rifle has the desirable full octagon barrel with a 15-shot magazine. The
loading gate, trigger and screws have a fire blue finish. The hammer
and crescent buttplate are color casehardened. The top of the barrel
is roll-stamped in two lines: “COLT’S PT. F.A. MFG. CO. HARTFORD
CT. U.S.A./over the various Colt Patent dates of 1883, 1885, 1886 and 1887. Directly in
front of the receiver it is stamped “32 Cal.” indicating its chambered for the 32-20 WCF cartridge. The left
side of the receiver is roll-stamped with a large Rampant Colt trademark. The serial number is stamped on
the lower tang behind the trigger. The original sporting style rear sight on the barrel has been removed
and is left blank and the rifle has been fitted a Winchester globe front sight with a Lyman folding tang rear
sight (both probably from the 1920s era). This rifle has the standard, high polish Colt commercial blue finish on the metal parts and is fitted with a
straight grain American walnut varnished stock and pump handle with a crescent buttplate. The right side of the buttstock has been fitted with a silver patch box
with a decorative lid. The pistol grip area has also been custom period checkered to provide a better grip.
CONDITION: Very fine with 85% plus of the original high polish blue finish overall with the magazine tube turning a brown patina overall. The markings are clear and sharp, and the screw
heads only show some minor tightening on a couple of them. The recheckered, refinished stock and pump handle are both in fine condition with minor handling marks on the sides. The
period enhancements, patch box, checkering and additional sights were very nicely done. Mechanically fine.
Estimate: 2250 - 3250

BOTH SIDES PICTURED
LOT 120
Colt Paterson Model 1839 Revolving Percussion
Carbine - Serial no. 487, 525 cal., 24 3/8 inch part round bbl.,
brown/blue finish, walnut stock. Approximately 950 of Samuel Colt’s
Model 1839 Revolving Carbines were manufactured at the Patent Arms
Manufacturing Co.’s Paterson, New Jersey, factory circa 1838-1841. They were the most
successful of the Paterson firearms and were used by both the Republic of Texas and the
U.S. Army. This carbine has a smoothbore part-round/part-beveled barrel with brazed lug.
The lug is not fitted with a loading lever and has a flat, two-groove wedge and second transverse slot behind the wedge slot, a post front sight, and a dovetail mounted block rear sight. The right side of the barrel lug is roll-stamped
“Patent-Arms M’g. Co. Paterson, NJ.-Colt’s Pt.*” with wavy lines at the ends. The round-back cylinder is 2 1/2 inches long, was roll-engraved, and retains visible patent and address markings. The serial number “487” is found on the
back of the barrel lug, wedge, arbor pin, turning ring, and toe of the buttplate, and “382” is on the back of the cylinder indicating the cylinder was replaced.
CONDITION: Good with mottled gray patina, mild pitting, some varnish on the rear sections, and general mild wear. The stock refinished stock is fair and has a group of dents on the right side of the butt, minor cracks, and a loose
fitting lower tang screw. Mechanically fine. These carbines, though more popular in the period than the other Paterson arms, are rare and important pieces necessary for any complete Colt percussion revolver collection. They
helped Samuel Colt establish the utility of his revolving arms for which he remains world famous.
Estimate: 9500 - 16000
BOTH SIDES PICTURED
LOT 121
Colt Model 1855 Percussion Revolving Military Pattern Rifle-Musket with Saber Bayonet Lug - Serial no. 1694, 56 cal., 31 5/16 inch
part octagon bbl., blue finish, walnut stock. Only around 500 of the Model 1855 rifle-muskets were manufactured in .56 caliber with 31 5/16 barrels out of
9,310 military rifles manufactured in 1856-1864. It has a brass blade front sight, saber bayonet stud and bar on the right side at the muzzle (desirable), two
barrel bands, sling swivels on the rear band and buttstock, a three-leaf rear sight, “COL. COLT HARTFORD CT. U.S.A.” in the top strap groove, “PATENTED SEPT.
10th 1850” in one cylinder flute, “COLT’S PATENT/+/Nov. 24th 1857” on the left side of the frame, matching serial numbers visible on the upper and lower tangs,
“56 CAL” on the left side of the trigger guard, and smooth stock and forearm with cleaning rod under the barrel and in the stock compartment.
CONDITION: Very good plus with strong traces of original blue finish in the protected areas and otherwise even dark brown patina, some minor pitting, general
mild scratches and dings (particularly on the cylinder), smooth re-oiled finish on the otherwise very good wood, clean rectangular filled in splices of wood inset
on both sides of the wrist, and mild overall wear. Mechanically fine.
Estimate: 5500 - 8500
131

LOT 122
Civil War Era Colt Model 1851 Navy Percussion
Revolver - Serial no. 95113, 36 cal., 7 1/2 inch octagon bbl., blue/
casehardened/silver finish, walnut grips. Manufactured in 1860 with
standard markings and features including matching numbers on the
barrel, frame, trigger guard, back strap (partially ground away), loading
lever, arbor pin, cylinder, and wedge. Many of the commercial Colt
revolvers produced before and during the Civil War were used as
privately purchased sidearms.
CONDITION: Fine, retains 30% plus of the original blue finish, 70% of the original case colors
on the hammer and loading lever, the frame shows patterns of case colors, and 85% of the
original attractively patinated silver plating with the balance mostly a smooth grey patina. The grip is also fine
with minor dings and scratches throughout, a couple minor absent chips in the toe, and a moderate divot near
the front strap. Mechanically excellent. A fine representative example of a Colt Model 1851 Navy
from the Civil War Era!
Estimate: 4000 - 6000
LOT 125
Exceptional Colt Model 1862 Police/Pocket Navy
Cartridge Conversion Revolver with Desirable Long Barrel
- Serial no. 10881, 38 RF cal., 6 1/2 inch round bbl., nickel finish, walnut
grips. Manufactured in 1862 and later one of approximately 6,500
converted c. 1873-1875. The barrel has the standard two-line address
and the two patent dates are marked on the left of the frame. Matching
visible serial numbers including “881” partial number on the cylinder.
CONDITION: Exceptionally fine, retains 90% plus original nickel finish with some mild flaking on
the ejector rod housing, some mild wear on the grip straps exposing an attractively patinated
brass, and a few scattered patches of light pitting. The grip is very fine with some scattered
minor dings and scratches and some scattered mild flaking of the varnish, which is more concentrated on the
butt. Mechanically functions fine, but is slightly out of time.
Estimate: 2000 - 3000
LOT 123
U.S. Navy Cartridge Conversion Colt Model
1861 Navy Revolver - Serial no. 7041, 38 CF cal., 7 1/2
inch round bbl., blue/casehardened/silver finish, walnut grips.
Manufactured in 1862, this is one of only 2,200 Model 1861 Navy
revolvers believed to have been factory converted in the mid 1870s.
The U.S. Navy had only purchased a few hundred ‘61 Navies during
the Civil War. Like the U.S.N. contract Model 1851 Navy revolvers, these revolvers saw use
in the Civil War and remained in use into the late 19th century. It has a German silver blade
front sight, the New York barrel address, “R.W.M.” and an anchor on the bottom of the barrel
at the breech, “PAT. JULY. 25, 1871./PAT. JULY. 2, 1872.” stamped over “COLTS PATENT on the
left side of the frame, “36 CAL” on the left side of the trigger guard,
“222/7041” on the cylinder, “041” on the loading gate, and “7041”
on the barrel, frame, grip straps, and grip.
CONDITION: Very good, showing mostly a smooth grey patina with
traces of factory refurbished blue finish in sheltered areas primarily
around the barrel lug, traces of case colors on the frame, the brass
showing an attractive antique patina, and some scattered patches
of light pitting. The grip is fair with heavy wear, numerous dings and scratches scattered throughout, and a
hairline crack in the right butt. Mechanically excellent.
Estimate: 2000 - 3000
LOT 126
Colt Model 1862 Police/Pocket Navy
Cartridge Conversion Revolver with Holster - Serial
no. 2709, 38 RF cal., 4 1/2 inch round bbl., nickel finish, walnut
grips. Manufactured in 1861 and later one of approximately
6,500 converted c. 1873-1875. The barrel has the standard one-line
address, “COLTS/PATENT” marked on the left of the frame, “36 CAL” on the
left of the trigger guard, and the stagecoach hold up scene roll engraved on the cylinder. Matching visible serial
numbers including “709” partial number on the cylinder. Includes a period leather flap style holster.
CONDITION: Very fine, retains 85% plus original nickel plating and much of the nitre blue on screws with the
balance mostly a smooth grey patina, some scattered mild flaking of the nickel plating, and a few scattered
patches of light pitting. The grip is also very fine with some minor dings and scratches scattered throughout.
Mechanically excellent. The dry leather holster is very good with moderate wear and torn flap retention strap.
Estimate: 1800 - 2750
132
LOT 124
Very Fine Colt Model 1849 Pocket
Percussion Revolver - Serial no. 303912,
31 cal., 4 inch octagon bbl., blue/casehardened/silver finish,
walnut grips. Manufactured in 1868 with standard markings and
features including all matching serial numbers, including on the
varnished walnut grip.
CONDITION: Very fine with 75% original blue finish on the barrel, traces of
original blue on the cylinder, 70% original case colors, strong original silver plating around
the trigger guard, aged patina on the silver and exposed brass, patches of mild oxidation/
pitting, smooth gray and brown patina on the balance, and mild overall wear. The grip
is excellent and has nearly all of the glossy original finish, minor lower edge wear, and
minimal light dings. Mechanically excellent.
Estimate: 1100 - 1600
LOT 127
Colt London Model 1851 Navy Percussion Revolver - Serial no.
41375, 36 cal., 7 1/2 inch octagon bbl., blue/casehardened finish,
walnut grips. Manufactured at Colt’s London factory in 1856 near
the end of production in London with a brass post front sight,
“-ADDRESS COL. COLT LONDON-” on top of the barrel, London proof and view marks on
the barrel and cylinder, “COLTS/PATENT” on the left side of the frame, “M” on the left side of
the trigger guard, and all matching serial numbers (including the grip).
CONDITION: Very good with traces of original finish in the protected areas and otherwise
dark gray patina, mild pitting, and file marks on the butt. The refinished grip is good aside
from a repaired chip on the left at the toe and has smooth oiled finish and minor wear.
Mechanically fine.
Estimate: 1600 - 2250

LOT 128
Scarce Enfield Inspected
Egyptian Contract Colt Model
1851 Navy Percussion Revolver -
Serial no. 182220, 36 cal., 7 1/2 inch octagon bbl., blue/
casehardened/silver finish, walnut grips. In 1865 and 1866, 4,000 Colt Model
1851 Navy revolvers were manufactured in Hartford, shipped to and proofed in London,
and then finally inspected by Enfield, who stamped the grips with their cartouche.
Some are believed to have gone to New Zealand and Canada rather than Egypt. This
revolver was manufactured in 1865 and has standard markings and features for the era as well as
London proofmarks, an Enfield cartouche (“R [crown] M” and “Enfield” around an inspector’s mark) on
the left side of the grip. All visible numbers are matching. A very scarce variation of a Colt Model 1851
Navy revolver!
CONDITION: Fine, retains 40% bright original blue finish on the barrel and 25% of the original case colors on the
frame. Silver plating in sheltered areas with the balance a smooth brown patina and attractive antique patina on
the brass. The grip is also fine with much of the original varnish, minor dings and scratches throughout, hammering
marks on the butts (including the butt of the back strap), and a clearly visible cartouche.
Mechanically excellent.
Estimate: 2750 - 4250
LOT 129
Scarce and Desirable Colt Model 1849 “Wells Fargo” Pocket
Percussion Revolver - Serial no. 149646, 31 cal., 3 inch octagon bbl., blue/
casehardened/silver finish, walnut grips. This is a scarce Model 1849 Pocket Model
variation that was manufactured in 1858 with a three inch barrel without provisions
for a loading lever, a solid lug without loading slots, and otherwise standard Model 1849
markings and features including matching serial numbers (including partial number in ink on the grip).
The digit “8” is factory stamped below the serial number on the frame. Only 4,000 of this variation are
estimated to have been produced. The origin of the variation and its nickname
is a subject of speculation.
CONDITION: Very good, retains 25% of the original silver plating on the back strap and trigger guard with the
balance mostly a brown-grey patina and an attractive antique patina on the brass. The grip is fine with some
scattered minor dings and scratches, some minor hammering type dings on the butt, and retaining most of the
original varnish. Mechanically excellent.
Estimate: 2500 - 3750
LOT 130
Colt Model 1861 Navy
Percussion Revolver - Serial no.
26379, 36 cal., 7 1/2 inch round bbl., blue/casehardened/
silver finish, walnut grips. Manufactured in 1865, this is a solid representative
example of a Colt Model 1861 Navy revolver. The matching serial number is located
on the barrel, frame, trigger guard, and back strap with partial matching numbers
on the cylinder, loading lever, arbor pin, and wedge. The Colt Model 1861 Navy Revolver is
widely considered to be the most attractive and best designed of all Colt percussion revolvers. The
late introduction of the model and destruction of the Colt factory in the 1863 fire greatly limited Colt
Model 1861 production.
CONDITION: Very good plus, retains 25% original blue finish and faint patterns of the original case colors and silver
plating in sheltered areas with the balance a smooth grey patina and an attractive antique patina on the brass.
The grip is fine with much of the original varnish and some minor dings and scratches scattered throughout.
Mechanically excellent.
Estimate: 2250 - 3500
LOT 131
Very Fine Civil War Era Colt Model 1862 Pocket Navy
Percussion Revolver - Serial no. 12675, 36 cal., 4 1/2 inch octagon bbl.,
blue/casehardened/silver finish, walnut grips. Manufactured in 1862, during the Civil War,
it would have made an excellent sidearm for any soldier that could afford to privately
purchase one. It has a brass cone front sight, “ADDRESS COL. SAML COLT NEW-YORK U.S.
AMERICA” on the top of the barrel, standard stagecoach scene and patent markings, “V” and “36 CAL” on
the left side of the trigger guard, and matching serial numbers on the barrel, frame, trigger guard, and
back strap. Matching partial numbers are visible on the wedge, arbor pin, cylinder, and appears to be
marked with ink in the grip mortise.
CONDITION: Very fine, retains 60% original blue finish, 70% original case colors, and traces of original silver plating
with the balance mostly a smooth grey patina, attractive antique patina on the brass, and a series of minor scratches
on the barrel lug near the wedge on the right. The grip is excellent with some minor dings and scratches scattered
throughout. Mechanically excellent.
Estimate: 2250 - 3500
LOT 132
Very Fine Cased Colt Model 1849 Pocket
Percussion Revolver - Serial no. 110739, 31
cal., 4 inch octagon bbl., blue/casehardened/
silver finish, walnut grips. Manufactured in
1856 with standard markings. The cylinder
has the stagecoach hold up scene and
“COLTS PATENT/NO. 110739”. The complete
matching serial number is marked on the
barrel, frame, trigger guard, and back strap
while the partial number is also on the
loading lever, wedge, and cylinder pin.
Includes a hardwood case, fine blued Colt’s
patent ball mold with sprue cutter, dualsided
eagle motif flask, oiler, and some .31 caliber balls.
CONDITION: Very fine, retains 75% plus original blue finish, 70% original case colors, and 85% plus original
silver plating with the balance mostly a smooth grey patina, dark antique patina on the silver, and crisp
markings. The grip is also very good with some scattered light dings and scratches and retaining almost all
the varnish. Mechanically excellent. The case is fine with faded lining, minor handling/storage marks and the
accessories are generally fine or better with an aged patina.
Estimate: 3000 - 4500
LOT 133
Fine Cased Colt Model 1855 “Root”
Sidehammer Percussion Pocket
Revolver - Serial no. 20205, 28 cal.,
3 1/2 inch octagon bbl., blue finish,
highly figured varnished walnut grips.
Manufactured in 1859 as a Model 2 with
the Hartford barrel address with pointing
hand motif and the “cabin and Indian”
rollmark on the cylinder. Highly figured
“deluxe” style piano varnished walnut grip.
Includes a hardwood case, Colt’s Patent
bullet mold, dual-sided eagle motif flask,
nipple wrench, cap tin, and a few .28 caliber balls.
CONDITION: Fine, retains 60% plus original blue finish and 40% original case colors on the hammer and
loading lever with the balance a smooth grey patina. The grip is very fine with some light scratches and dings,
and retaining almost all of the varnish. Mechanically excellent. The case and accessories are fine or better with
some minor handling marks and some light oxidation on the flask spout.
Estimate: 2750 - 4250
LOT 134
Civil War Era Cased Colt Model
1862 Police Percussion Revolver
- Serial no. 26704, 36 cal., 4 1/2 inch
round bbl., blue/casehardened/
silver finish, walnut grips. The Model
1862 Police would have been an
excellent sidearm to carry day to
day during the Civil War, especially
those with short barrels like this
one which were as compact as the
popular Model 1849 Pocket but
offered more stopping power. It was
manufactured in 1864 with standard markings and features, including all matching serial numbers, and comes
in a custom fitted case with an Eley cap tin, “36 P” marked Colt patent dual cavity bullet mold, Colt patent
eagle pattern powder flask, and lead balls.
CONDITION: Very good with 30% plus original blue on the barrel, traces of original blue on the cylinder,
aged patina on the grip straps, traces of faded original case colors, some minor oxidation/pitting, and gray
and brown patina on the balance. The grip is fine and has mild edge wear and minor dings and scratches.
Mechanically fine. The relined case and accessories are very good with mild age and storage related wear.
Estimate: 2000 - 3000
133

Rock Island Auction Company® Proudly Presents the Incredibly Historic & Iconic "Floyd Navy"
The Curt McClymond Collection
134
LOT 135
Historic Cased “National Treasure” Gustave Young Deluxe Factory
Engraved Colt Factory Presentation Model 1851 Navy Percussion
Revolver Inscribed from Colonel Colt’s Workmen to U.S. Secretary of
War and Future Civil War Confederate General John B. Floyd with
Documents - Serial no. 63838, 36 cal., 7 1/2 inch octagon bbl., blue/
casehardened finish, highly figured varnished walnut grips. Rock Island
Auction Company proudly presents the incredibly iconic “Floyd Navy.” The
engraving was executed by master engraver Gustave Young and has his
classic deluxe style with floral blooms and animal heads among the highly
detailed scroll engraving. Note the dog head among the scrolls on the left
side of the barrel and classic wolf/dog head on the hammer, typical
features of Gustave Young’s work. The overall pattern is the classic style
perfected by Young. The inscription on the back strap reads, “To Hon J.B.
Floyd/From Col. Colts Workmen.” A second presentation inscription is
featured on the front strap and reads, “Peter Otey from Gen. Floyd.” The
revolver has an apostrophe marked by the matching serial numbers on the
barrel, frame, trigger guard, and back strap indicating factory engraving.
The cylinder, wedge and arbor pin are also numbered to the gun. The left
side of the frame is stamped “COLTS/PATENT” above “US.” The revolver falls
in the 42000-80000 serial number range of Model 1851s which were
purchased by the U.S. Army prior to the Civil War. This revolver was
manufactured in 1856. It is fitted with a dovetail type front sight. The top
barrel flat is marked “-ADDRESS SAML COLT NEW-YORK CITY-”. The cylinder
has the naval battle scene along with scrollwork at the rear. Fitted with a
nicely figured deluxe walnut grip with varnish finish. The partitioned case
contains a sealed Eley Brothers cap tin, a sealed package of six seamless
skin Navy cartridges, a “COLT’S/PATENT” double face powder flask featuring
a patriotic/military motif, a blued “COLT’S/PATENT” dual cavity bullet mold,
and some lead balls. Includes a 2012 dated Bobby Smith Antique guns
receipt (copy) for the revolver. The revolver is pictured and identified in R.L.
Wilson’s “Fine Colts: The Dr. Joseph A. Murphy Collection” on pages 38-39.
The revolver was also exhibited in “Samuel Colt Presents” at the Wadsworth
Athenaeum in 1961-62 and is pictured and identified in the book of the
same title on page 245. It is also photographed in the iconic 1970s Texas
Gun Annual from the collection of Dr. Robert Nelson, whom also once
owned the famous “Millikin Dragoon”. This revolver is one of 3 Colt
presentation arms along with a shoulder stock presented to Floyd as
documented in “Samuel Colt Presents” (pages 241-246). As R.L. Wilson
explains, “The [Colt factory] gift consisted of
at least a Third Model Dragoon with matching shoulder
stock (number 16467), a Model 1849 Pocket revolver (number 113858),
the Model 1851 Navy, and a Sidehammer revolving rifle (number 1935).
Possibly more pieces were involved…[but] records are incomplete. All
items in the set were engraved and inscribed, excepting no inscription was
present on the back strap of the Dragoon.” Wilson attributed the engraving
to Gustave Young. According to Wilson, “Young was one of the factory
workmen who journeyed to Washington, D.C., for personal presentation of
the set to Floyd.” The presentation occurred in 1857. Samuel Colt was a
master salesman above all his other attributes, and he found that the best
kind of advertising that he could employ to promote his products were the
products themselves. He handed out finely engraved and inscribed
presentation guns to anyone he thought to be a worthy recipient. One of
his guns placed in the hands of an influential person, believed Colt, would
go a long way in winning support and acceptance of his products. As
Secretary of War during the U.S. President James Buchanan administration
from 1857 to 1860, John Floyd was the perfect candidate for a set of Colt
presentation arms that originally included this Model 1851. John B. Floyd
(1806-1863) studied law at South Carolina College, and after graduating in
1829, set up his own law practice in Abingdon, Virginia. This was to be a
brief venture as he soon left Abingdon with one of his brothers for
Arkansas where they invested in a cotton plantation. In the beginning the
cotton enterprise was profitable, but the Panic of 1837 left Floyd in debt
and as a result he lost the plantation. Making matters worse was an
infectious disease outbreak that killed most of his slaves and nearly killed
him. He returned to practicing law in Abingdon. By the late 1840s Floyd, a
Democrat, was involved in state politics. He was elected to the General
Assembly in 1847 and in 1849 was elected governor, a position his father
held during the Nat Turner Insurrection. An original land deed from 1850
signed by Floyd when he was governor is included as well as a carte de
visite of Floyd. In 1857, President James Buchanan appointed Floyd
secretary of war, a reward for aiding Buchanan during the presidential
campaign. Floyd’s tenure with the War Department was generally viewed
as corrupt; he was accused of orchestrating shady government contracts.
His decision to appoint a family member as quartermaster general of the
army over senior officials created many enemies including future
Confederate General Robert E. Lee and President Jefferson Davis, and the
dispute followed him to Richmond. Floyd resigned from the War
Department on December 29, 1860. He disagreed with Buchanan over the
handling of Major Robert Anderson’s occupation of Fort Sumner, was
accused of secretly transferring arms and munitions from Northern to
Southern arsenals in preparation of the Civil War, and was accused and
later exonerated of taking part in a bonds scandal at the Department of
PRESIDENT BUCHANAN AND HIS CABINET FROM LEFT TO
RIGHT: JACOB THOMPSON, LEWIS CASS, JOHN B. FLOYD,
JAMES BUCHANAN, HOWELL COBB, ISAAC TOUCEY,
JOSEPH HOLT AND JEREMIAH S. BLACK (C. 1859)
the Interior. In late May 1861, Floyd was appointed brigadier general in the
Confederate army and spent most of the summer and autumn of 1861
quarreling with fellow former Virginia governor Brigadier General Henry
Wise before being assigned commander of Fort Donelson in Tennessee. He
arrived at Fort Donelson just as the fort was under attack by Union naval
and army forces commanded by Ulysses S. Grant. While Floyd may have
been a horrible Secretary of War, he was an even worse military tactician.
Historians have argued that Floyd’s lack of leadership played a significant
role in the Union’s first major victory. With little military experience, Floyd
deferred most of the decision making to his experienced subordinates,
Brigadier Generals Gideon Pillow and Simon Buckner. Union forces laid
siege, resulting in a furious fight as the Confederate forces attempted
break out. As the tide of the battle was turning in the favor of the
Confederacy, the order was given for the Southern troops to return to their
entrenchments. Grant took full advantage of the confusion and indecision
that befell Floyd’s forces by launching a counterattack that resulted in the
retaking of lost ground as well as gaining new footholds. Floyd and Pillow
turned command of the fort to Buckner and escaped with about 2,000
men to Nashville. Buckner surrendered to Grant who demanded, “No terms
except an unconditional and immediate surrender can be accepted.” For
the rest of his life Floyd claimed that he escaped because if captured he
would have been hanged as a traitor due to the controversy surrounding
his time as Secretary of War just prior to the outbreak of the Civil War and it
was futile to defend “the naked fort,” as he called it, from the Union’s
onslaught. Included in this lot is a March 25, 1862 dated letter written by
Floyd and addressed to the Honorable Henry S. Foote, Chairman Virginia
House of Representatives. The four page letter is Floyd’s defense for the
defeat at Fort Donelson. This letter is pictured with the revolver in “Fine
Colts.” In conjunction with the capture of Fort Henry, the Battle of Fort
Donelson was the first major Union victory and forced the South to give up
southern Kentucky and much of Middle and West Tennessee. The rivers
and railways in the area became vital Northern supply lines in the
Western Theater.

"Floyd, the Secretary of War, scattered the army so that much of it could be captured when
hostilities should commence, and distributed the cannon and small arms from Northern
arsenals throughout the South so as to be on hand when treason wanted them."
Personal Memoirs of Ulysses S. Grant

The battle was nothing short of
opening “the heartland of the
Confederacy” to Federal troops.
The battle also gave the North
a new hero: “Unconditional
Surrender” Grant. Floyd went
on to assist in the evacuation of
Nashville, the first Confederate
capital to fall. In the aftermath
of the fall of Nashville, President
Davis relieved Floyd of command
without a hearing. Floyd returned
to Abingdon where he was appointed a major general in the state militia. Shortly thereafter he died on August
23, 1863. The front strap inscription indicates that Floyd presented the revolver to Peter Otey (1840-1902). Otey
was a staff officer with the 51st Virginia Infantry under Floyd and was among those who escaped with Floyd from
Fort Donelson to Nashville. At the time, Otey was engaged to his future wife, Malvina Floyd, the general’s niece.
Otey and Malvina were married on April 15, 1863, just a few months prior to General Floyd’s death in August.
Perhaps this revolver was presented to Otey as a wedding gift or for appreciation for his service on the general’s
staff. Nevertheless, the two men thought highly of each other as demonstrated by the general’s presentation
of the revolver and Otey and his wife naming their only son, John Floyd Otey (1872-1888), after the general. In
October 1862, Otey was commissioned a major with the 30th Virginia Sharpshooters Battalion. He fought in
numerous battles including the Battles of Shiloh, Cedar Creek, New Market, and Waynesboro. He was wounded
at the Battle of New Market, recovered from his arm wound, and was taken prisoner of war at the Battle of
Waynesboro, which was the final battle for Confederate Lieutenant General Jubal Early whose army, including the
30th Virginia Sharpshooters Battalion, was destroyed. After the war Otey worked in banking and sold insurance
before organizing the Lynchburg & Durham Railroad to which he served as president. As a Democrat, he served in
Congress from 1895 until his death in 1902.
CONDITION: Exceptionally fine. The barrel retains 85% bright original high polished blue finish, and the cylinder
retains 60% original polish blue finish with the balance a smooth brown patina. 90% original case colors
remain on the hammer and frame, and 70% original
case colors remain on the loading lever. 98% original
silver plating remains on the grip straps. The cylinder
scene is complete. The engraving is crisp and inscriptions
are crisp. The grip is excellent with a small chip near
Peter Otey
the bottom, otherwise minor dings and scratches and
most of the original varnish remaining. Mechanically
excellent. The case is fine with minor handling/storage
marks, discreet museum type collection number on
a short end, and typical high spot wear. The powder
flask retains 80% plus of the original brown lacquer
and gilt finishes. 95% original high polished blue finish
remains on the presentation grade bullet mold. Without a doubt this historic factory presentation engraved
Model 1851 will be a stand out piece even in the most advanced private, public, Colt, or Civil War collection. This
extraordinary Colt revolver is a key historic reminder of the American story when philosophical division between
the North and South eventually led to a civil war.
Provenance: The Curt McClymond Collection.
Estimate: 225000 - 375000

AS PICTURED AND
DESCRIBED IN THE BOOKS
SAM COLT PRESENTS
AND FINE COLTS: THE
DR. JOSEPH A. MURPHY
COLLECTION BY WILSON

1861 Phoenix
3-Inch Rifle
138
LOT 136
1861 Dated Civil
War Phoenix Iron
Company U.S. 3-Inch
Ordnance Rifle with Carriage - This
model was invented by John Griffen and was
reported to be very accurate under a mile.
Many of the roughly 350 3-Inch Ordnance Rifles extant lie within national historic sites/military parks.
These were the second most common rifled field artillery pieces during the Civil War, and only one burst
in action. This cannon was manufactured by the Phoenix Iron Company of Phoenixville, Pennsylvania,
just northwest of Philadelphia and inspected in 1861 by Union inspector Theodore Thaddeus Sobieski
Laidley. The company produced most (around 1,000) of the 3-Inch Ordnance Rifles. As this is an early
example, it properly does not have the Reeve’s patent marking; only numbers 1-235 do not have the
stamp. These early rifles were made using Griffen’s method which used wrought iron rods bundled and
then welded together before drilling out the bore. Reeve’s improvement was stronger and involved rolls
of iron. It has “TTSL No 81 PI Co 1861/819 lbs” on the muzzle, “US” on top over the trunnions, “10” and “1[horizontal]/6” on the trunnion straps, 3 inch bore that is
65 inches in length, black painted metal, green painted reproduction wood carriage, roughly 56 inch diameter wheels, a small blade front sight, rods, and a tampion.

CONDITION: Very good overall. The iron has an
even coat of black paint and some oxidation in
the bore and rims and general mild wear, and
the wood has even green paint, some minor
cracks on the wood, and light wear.
Estimate: 37500 - 55000
139

Investment Quality Spencer Army Model 1860 Repeating Rifle
LOT 137
Exceptionally Fine Civil War U.S. Spencer Army Model
1860 Repeating Rifle - Serial no. 9358, 52 cal., 30 inch round
bbl., blue/casehardened finish, walnut stock. These innovative
rifles were manufactured for the U.S government in
1863 and 1864 within primarily the 700-11000 serial
number range. It was this pattern of Spencer rifle
that was carried by some of Custer’s 2nd Brigade of
Michigan Cavalry at the battle of Gettysburg, when they
successfully prevented the Confederate cavalry from
outflanking the Union army, as well as being the pattern
believed to have been personally tested by President
Lincoln. These rifles were also carried by the “Lightning
Brigade” commanded by Colonel John T. Wilder, who
said of the rifles, “My men feel as if it is impossible to be
whipped, and the confidence inspired by these arms added to their terribly
destructive capacity, fully quadruples the effectiveness of my command.” Though
initially not widely accepted, successes such as these led to the U.S. Ordnance
Department purchasing 11,470 of these rifles, becoming the most successful
repeating longarm of the Civil War. This exceptional example has a blade front sight that
doubles as a bayonet lug for fitting an angular/socket bayonet, six-groove rifling, three barrel
bands, folding ladder rear sight, the three-line Spencer address and patent marking on the
top at the breech, the serial number on top of the receiver behind the ejector
cutout, smooth buttstock with the standard 7-round tubular magazine inserted
through the buttplate, and sling swivels on the bottom of the buttstock and
middle barrel band. There are two U.S. inspector cartouches visible on the left
side of the wrist, these being “HHH” and “DAP”.
CONDITION: Exceptionally fine, retains 95% original blue finish and 70% of
the original case color patterns primarily on the sides of the receiver with the
balance mostly a smooth grey patina. The wood is very fine with raised feathered
grain, some minor storage dings and scratches scattered throughout and
clear cartouches. Mechanically excellent. An extraordinary example
of one of the most innovative firearms of the Civil War!
There are very few finer examples!
Estimate: 15000 - 25000
140

LOT 138
Historic U.S. Officer’s Presentation Sword Inscribed to Captain
Henry E. Fales with Extraordinary High Relief Cast “Indian
Princess” Style Handle and Gilt Scabbard - The sword is patterned
after the U.S. Model 1850 Foot Officer’s sword, though it is far more
embellished than standard issue. The slightly curved, W. Clauberg
made blade is approximately 31 1/2 inches long with 9 inch long
etched sections near the center of the blade on each side, “US”
and vines on the left and an eagle and “E PLURIBUS UNUM” banner
surrounded by vines on the other. The gilded hilt is magnificent, with
a sunburst style openwork guard, spiral D-guard with torch motifs, a
high relief eagle sits perched atop the pommel, and the grip features
a high relief Native American woman wearing a feathered headdress
and skirt. The gilded scabbard has three high relief mountings,
the top a panoply of arms, the middle a wreathed torch and scroll,
and the bottom floral scrolls with a Medusa bust near the drag.
Between the upper two mounting is the inscription “Presented to/
Capt. Henry E. Fales/BY THE/Mayhew Guards Co. F. 10th Regt M.V.M./
AND Friends of the Co. May 28th 1873”. Henry Fales received his
commission as a captain on 2 December 1873 as the commanding
officer of Company F “The Mayhew Guards” of the 10th Regiment
Massachusetts Volunteer Militia. The regiment and company were
likely a continuation of the unit raised during the Civil War and
participated in the battles of Antietam, Fredericksburg, Gettysburg,
and The Wilderness. The regiment likely continuing in service to the
commonwealth of Massachusetts after the war as a state militia when
Captain Fales joined.
CONDITION: Exceptionally fine, the excellent blade is mostly bright
with most of the slightly thinned gilding remaining in the etched
panels. The hilt retains almost all of the original gilding on the
guard and pommel with some mild wear on the grip exposing the
attractive antique brass beneath. The scabbard retains most of
the original gilding with some areas having thinned to expose a
smooth grey patina beneath or an antique brass on the mountings.
A magnificently embellished presentation sword such as this in such
exceptional condition would be a welcome addition to any U.S.
military collection!
Estimate: 8000 - 12000
141

142
LOT 139
Colt Model 1860 Army Richards
Cartridge Conversion Revolver - Serial
no. 199531, 44 Colt CF cal., 8 inch round bbl., blue/
casehardened/silver finish, walnut grips. This is one of
approximately 9,000 Richards conversions manufactured
in 1871-1878 based on designs by Charles B. Richards;
Richards was also one of the designers of the Colt Single Action Army, and
some of these revolvers were manufactured alongside the Single Action Army
and are believed to have seen significant use in the Old West. The revolver’s
serial number dates to 1873 and it has the standard markings and features
associated with this variation, including matching visible serial numbers and
“1321” on the loading gate.
CONDITION: Very good plus, retains 40% original blue finish on the barrel, strong traces on
protected areas of cylinder, and faint traces of both the original case colors and silver plating
with the balance mostly a smooth grey patina. The grip is good with numerous minor dings
and scratches throughout, moderate wear, and retaining patches of the original varnish.
Mechanically excellent.
Estimate: 2500 - 3750
LOT 140
Fine Civil War New Jersey
Contact Whitney Navy Percussion Revolver
with Holster - Serial no. 13281, 36 cal., 7 5/8 inch octagon bbl., blue finish,
walnut grips. This Whitney Navy Model Revolver falls into the Second Model,
3rd Type serial number range (13000-15000) and has a Colt style horizontal
wedge shaped loading lever latch. It is marked “NJ” on the left side of the barrel at the
breech and on the lower left side of the frame indicating
it was purchased by the State of New Jersey to arm its
troops during the Civil War. New Jersey purchased 794
Whitney revolvers in 1863-1864, and some of them
are known to have been issued to the 3rd New Jersey
Cavalry Regiment. “Y” is marked by the matching serial
numbers on the loading lever, barrel, and cylinder, and
“HU” is marked by the matching serial numbers on the
frame, trigger guard, and right grip (left grip just has the
number). All of the serial numbers match. “R.R.” is marked on the right side of the front strap. The
barrel has a post front sight and is marked “E. WHITNEY/N. HAVEN.” The top strap is grooved to
serve as the rear sight. The cylinder has the eagle, lion, shield, and navy scene and a “3” between
two of the nipples. Includes a left side black leather military style flap holster. Also includes a
consignor write-up on the revolver and information about the 3rd N.J. Cavalry.
CONDITION: Fine with 40% original blue finish, smooth brown patina on the balance, light
oxidation, some tool marks, general marks and scratches, and generally distinct markings.
The grips are also fine and have minor edge wear, faint scratches, and smooth oiled finish.
Mechanically fine. The holster is good and has crackling and flaking, partially detached strap
(reinforced with tape), and otherwise solid stitching. Definitely an attractive New Jersey contract
Whitney revolver with a correct period holster.
Estimate: 2500 - 3500
BOTH SIDES PICTURED
LOT 141
Desirable and Rare Colt Model 1860
Army Thuer Cartridge Conversion Revolver - Serial no.
178484, 44 cal., 8 inch round bbl., blue/casehardened/silver finish,
walnut grips. This is a rare original example of a Colt Thuer Conversion
Model 1860 Army revolver that was manufactured circa 1868-71. The top
of the barrel is roll-stamped: “-ADDRESS COL. SAML COLT NEW-YORK U.S.
AMERICA-” in one line. “COLTS/PATENT” is stamped on the left side of the frame. The cylinder is
roll-engraved with the Texas Navy battle scene and “COLTS PATENT”. The rear of the cylinder has
been correctly shortened to accommodate the Thuer conversion ring, and the ring has a correct
script “E” on the side, which denotes the eject position. All visible numbers are matching. Both
the rear of the cylinder and rear of the conversion ring are stamped with the assembly number
“20”. (Internally the Thuer Ring retains most of the blue and is built like a watch, as an original should be!) The left
side of the brass trigger guard is stamped with “44 Cal.” The conversion ring has the distinctive knurled turning
knob, rebounding firing pin, and ejection mechanism. The Thuer conversion was the first Colt revolver to utilize a
metallic cartridge and is a historically significant variation of revolver that is missing from most of the
antique Colt collections.
CONDITION: Very good, retains traces of the original blue finish and silver plating in sheltered areas, and faint
traces of original case colors on the loading lever with the balance mostly a smooth grey patina and an attractive
antique patina on the brass. The wood is fine with some scattered minor dings and scratches and retaining much
of the original varnish. Mechanically excellent.
Estimate: 4500 - 7000
LOT 142
Colt Model 1861 Navy Richards-
Mason Conversion Revolver - Serial
no. 2713, 38 CF cal., 7 1/2 inch round bbl., blue/
casehardened/silver finish, walnut grips. Colt Model 1861 Navy
Richards-Mason conversions were manufactured/converted
in the mid to late 1870s as cartridge revolvers using a mix of
percussion revolver parts on hand and newly fabricated components.
The U.S. Navy used many of these. The revolver has a blade front sight, the “-ADDRESS
COL. SAML COLT NEW-YORK U.S. AMERICA-” barrel address, standard naval cylinder
scene, the distinctive breech plate without a rear sight, a “476” marked loading gate,
centerfire firing pin on the hammer which has a small notch for a rear sight, “COLT/
PATENT” on the left side of the frame along with the added 1871 and 1872 patent dates, “36 CAL” on the left side of the trigger
guard, and matching visible serial numbers apart from the cylinder which is marked “1133”. The serial numbers on the frame and
trigger guard appear to be stamped over another number.
CONDITION: Fine, retains 30% factory refurbished blue finish primarily on the ejector and sheltered areas of the barrel lug, 40%
of the case colors, with the balance a brown-grey patina and mostly clear markings. The refinished grip is very good with some
moderate wear primarily around the edges, a moderate scuff in the left side, and light dings and scratches scattered throughout.
Mechanically excellent.
Estimate: 2000 - 3000

Historic & Significant - The Only Known C.C. Brand Single Shot Pistol, Formerly in the William M. Locke Collection
LOT 143
Rare Documented Prototype Civil War Era C.C. Brand
“Cook C.S.A. 1863” Marked Single Shot 52 Spencer
Rimfire Pistol with Holster - Serial no. 7, 52 Spencer cal., 8
5/8 inch part octagon bbl., blue/casehardened finish, walnut
grips. Christopher C. Brand of Norwich, Connecticut, received
a patented for this design on September 23, 1862. A carbine is
pictured but a “gun or pistol” is mentioned in body of the patent.
He presumably hoped to receive military contracts for his breech
loading arms and chambered them for the .52 Spencer cartridge
already in use. If this pistol had been manufactured a few years
earlier, it very well might have been accepted as a military weapon,
but during the Civil War revolvers were already well-established
and favored over single shot pistols which were reminiscent of the muzzle
loading horse pistols cavalrymen had used for hundreds of years. Brand was far
more successful with his whaling guns which were widely used in the second half of the
19th century. The action is much like the Merrill with the thumb spur on the back strap
pulling backwards to operate the toggle link which slides the breechblock to the rear.
The hammer is mounted in the center of the breechblock, and the very small extractor
lays to its right in the same slot. Only a few guns, mostly carbines, were made under
this patent. This is the only known Brand pistol. It is marked “COOK C.S.A.1863” on top
of barrel and has an “inspector” initial “B” on the top left flat. The bottom of the frame
is marked “7”. Copies of the patent papers accompany the pistol. Pictured in the 9th
Edition of “Flayderman’s Guide” (note the grip screw and the wear patterns) on page
471 and on page 507 of “The William M. Locke Collection” by Frank Sellers. It comes with
the well-fitting period leather holster. Provenance: Gillespie collection.
CONDITION: Very good with gray patina and mild pitting. The grips are fine and have
nice flame figure, glossy varnish, light scratches and nicks, some chipping at the heel on
the right, and a replaced
right screw. Mechanically
excellent. The holster is
fair with moderate overall
wear and tears
at the edges.
Estimate: 15000 - 25000
AS PICTURED AND DESCRIBED IN THE BOOK THE
WILLIAM M. LOCKE COLLECTION BY SELLERS
AS PICTURED AND DESCRIBED IN THE
BOOK FLAYDERMAN’S GUIDE TO ANTIQUE
AMERICAN FIREARMS & THEIR VALUES
BY FLAYDERMAN
143

144
LOT 144
Rare Confederate Rigdon, Ansley & Company Percussion Revolver - Serial no.
2352, 36 cal., 7 1/2 inch part octagon bbl., blue/casehardened/bright finish, walnut
grips. Only approximately 1,000 Confederate government contract Rigdon, Ansley &
Co. revolvers (also often referred to as Rigdon & Ansley revolvers) were manufactured
in Augusta, Georgia, from 1864 to 1865 after the dissolution of Leech & Rigdon in
1863. The company was run by Charles H. Rigdon, Jesse A. Ansley, Andrew Smith and
Charles Keen. After producing Leech & Rigdon revolvers, the company transitioned
to this improved model which has twelve cylinder stops instead of six stops, similar
to those used by Manhattan. Like the Leech & Rigdon revolvers, these are among the
most well-made and desirable of all Confederate handguns. The production quality
is certainly not up to par with the revolvers produced by major companies in the
North, but they are certainly quality and serviceable firearms. Like most Confederate
revolvers, the basic design of the revolver is the same as Colt’s Model 1851 Navy. The
barrel is part octagon, part round like Colt’s Dragoon revolvers. It has a brass post
front sight, “C.S.A.” on the top of the barrel, groove on the hammer for a rear sight,
horizontal wedge latch on the loading lever, “W” on the left side of the trigger guard,
and the matching serial number “2352” on the loading lever, wedge, cylinder, barrel,
frame, trigger guard, and back strap.
CONDITION: Very good plus. The iron components have
dark patina and moderate pitting. The frame is rough on
the left side and has some dried oil. One of the nipples
is damaged. The trigger guard and back strap display
deep aged patina, and the front trigger guard screw
is not securing the trigger guard. The revarnished grip is
also very good and has moderate lower edge wear including some
chipping at the toe, and mild scratches and marks. Mechanically fine. This
rare Confederate revolver would be an excellent addition to any Civil War or antique
revolving arms collection.
Estimate: 18000 - 27500

BOTH SIDES PICTURED
LOT 145
Desirable Parisian LeMat Percussion “Grape Shot” Revolver with Holster -
Serial no. 1209, 40 cal., 6 3/4 inch octagon bbl., blue finish, walnut grips. The LeMat
is one of the most famous percussion revolvers thanks to its central smoothbore barrel in addition to the rifled
barrel and eight-shot cylinder as well as its Confederate affiliation, including use by P. G. T. Beauregard, Braxton
Bragg (owned sn. 1273), J. E. B. Stuart, and other Confederate generals and officers. They were designed by
Jean Alexandre LeMat of New Orleans but mainly manufactured in Liege, Belgium, and Paris, France. Period
advertisements for the revolvers refer to them as “LeMat’s Grape Shot Revolvers.” The barrels on this example
measure .40 caliber and 18 gauge (.64 caliber). It has a triangular front sight, the early Liege style barrel latch
that pivots in the barrel lug, the central selector on the hammer tip for switching between the cylinder and the
smoothbore shot barrel, and groove on the hammer selector for a rear sight. The barrel is have “Col Le Mat Bte
s-g-d-g Paris” inscribed in an engraved panel with floral accents at the ends and the serial number and the “LM”
marking on the right at the breech. The serial number is repeated on the barrel latch, loading lever, shot barrel,
right side of the frame, and trigger. The hammer has an “L” on the left, and the toe of the grip frame has a “Z” on
the right and an “M” on the left. The checkered walnut grips have light engraving on the washer, screw, and nut.
The butt has a lanyard loop with a small lanyard ring. A later production brown leather flap holster is included.
CONDITION: Very good. The period refinished revolver now exhibits an even gray-brown patina overall and has
some minor pitting and light scratches and marks. The side plate is a little ill-fitting and has a small piece absent
on the top. The grips have crisp checkering, even oiled finish, light dings, and minor loss at the junction with
the back of the frame. Mechanically fine. The holster is very good and has mild wear. Overall, a very attractive
example of one of the rarest and most iconic Civil War era handguns.
Estimate: 8500 - 12000
LOT 146
Rare Boyle & Gamble
Confederate Staff & Field
Sword with Scabbard -
Operating in Richmond,
Virginia, Boyle & Gamble was one of the great sword making firms of the Confederacy. In keeping with the tastes of their buyers, most of Boyle & Gamble’s output
conformed to antebellum U.S. regulations, with Staff & Field pattern standing as one of their signature offerings. Measuring 35 1/2 inches in overall length, with a 30
1/4 inch curved single fuller blade with etched Confederate motifs. The cast brass guard shows Boyle & Gamble’s signature design, with a “CS” in a wreath topped by
a star and an ear of corn set between the guard and the branch, and “3” marked next to the blade, with a helmet pommel and a leather wrapped grip bound with a
single strand of heavy wire. The sheath is brown leather with brass fittings.
CONDITION: Sword itself is in fine condition, well above average for a Confederate weapon. The blade has turned a gray patina, with mild spotting overall, a few patches
of deeper pitting near the tip, and good detail in the etching. The guard and pommel have a rough cast appearance, and show a mixed aged patina overall, and the grip
retains half of the original leather. The scabbard leather is fragile, with tears and holes, the brass fittings are fine.
Estimate: 9500 - 14000
145

BOTH SIDES PICTURED
SERIAL
NUMBER 135
LOT 147
Scarce Civil War Confederate Early Griswold & Gunnison
First Model Percussion Revolver - Serial
no. 135, 36 cal., 7 1/2 inch round bbl., blue/
bright finish, walnut grips. The Griswold &
Gunnison revolvers are probably the most
popular of all Confederate handguns. Like most Confederate handguns, the
basic design is based on the Colt Model 1851 Navy. Griswold & Gunnison,
the partnership of Samuel Griswold and Arvin N. Gunnison, became the
largest Confederate handgun maker during the Civil War and manufactured
approximately 3,700 of their distinctive brass frame revolvers. During the
Battle of Griswold Station, the factory was destroyed by the 10th Ohio
Cavalry and 3rd Kentucky Cavalry. Although production ceased in late 1864, the Confederacy
continued to receive these revolvers as late as April 1865, and completed and uncompleted
revolvers were likely moved before the plant was destroyed and were later assembled at
another location. The revolver has the distinctive brass frame and grip straps, 6-shot cylinder,
safety pins between the percussion nipples, First Model rounded barrel lug, one-piece walnut
grip, “C” on the back of the frame to the right of the hammer as well as on the right at the toe
of the grip straps, and matching serial numbers on the loading lever, right side of the barrel,
cylinder, right side of the frame, trigger guard, and butt.
CONDITION: Fair. The once cleaned iron components mostly display artificial gray patina and
mild pitting. The cylinder has visible twist patterns, and the hammer has traces of blue. The
frame and back strap display dark aged patina, and the back strap has a spliced repair. The
markings are distinct. The replacement grip is very good and has minor handling wear, some
slight gaps, and minor dings and scratches. Mechanically fine. The widely issued Griswold &
Gunnison revolver is one of the most desirable Confederate made Civil War handguns. This
particular revolver, even with the old restoration would be a good representative example!
Estimate: 9500 - 16000
BOTH SIDES PICTURED
146
LOT 148
Massive Unmarked Cast Iron D-Guard
Bowie Knife - This piece is entirely made of
cast iron, including the blade, and completely
devoid of markings. It appears to retain traces of
a long deteriorated black enamel finish. It is possible that this was a hastily crafted confederate
Bowie knife, as the quality is certainly in line with other wartime expedited Confederate Bowies. It is 20
inches long overall with a 13 1/4 inch long 2 5/8 inch wide blade with a slight clip point. It appears to have been cast in two pieces, the blade being one, and the guard and
hollow handle the other. There is a label/property tag taped to one side of the blade with faint indecipherable writing.
CONDITION: Fair, showing mostly a rough mottled brown throughout with some traces of old black enamel finish.
Estimate: 1000 - 2000

LOT 149
Civil War American Machine Works Smith Patent Breech
Loading Percussion Carbine - Serial no. 10626, 50 cal., 21 5/8 inch
part octagon bbl., blue/casehardened finish, walnut stock. Nearly all of the Smith carbines
manufactured were issued to Union cavalry units and saw hard use during the Civil War; thus, higher
condition examples are sought after and hard to find. They are among the most well-made
carbines of the war, but their rubber cased ammunition
could jam and cause issues. This carbine has the standard
markings and features, a “LFR” inspection mark on the left at the
breech, and a crisp “JH” cartouche on the left side of the wrist.
CONDITION: Fine with 60% original casehardened finish showing attractive case colors, 40% original
blue fading to smooth brown patina, distinct markings, mild oxidation on the buttplate, minor
chipping on the top of the wrist at the back of the frame, and otherwise light wear on the otherwise
very fine wood. Mechanically excellent.
Estimate: 2750 - 3500
LOT 150
Excellent Providence Tool Co. Peabody Saddle Ring
Carbine - NSN, 50 RF cal., 20 inch round bbl., blue/casehardened finish, walnut stock. This
Peabody carbine was manufactured by the Providence Tool Company in 1866-1871. The barrel is
fitted with a notch and folding leaf rear sight and a front sight blade mounted on a bayonet stud base.
A saddle ring and staple are located on the left side of the receiver as are the “PEABODY’S PAT./JULY 22,
1862/MAN’F’D BY/PROVIDENCE TOOL CO./PROV. R.I.” markings. The Providence Tool Co. inspection mark for
foreign contract arms, “W.C.,” is stamped on the left stock wrist.
CONDITION: Excellent with 97% plus original blue and vivid casehardened finish and only minor wear
concentrated at the muzzle. The lightly reoiled wood is very fine with scattered dings and scrapes on the left
side of the buttstock. Mechanically excellent.
Estimate: 2250 - 3250
LOT 151
Civil War U.S. Contract E.G. Lamson & Co. Ball Patent
Repeating Carbine - NSN, 50 RF cal., 22 1/8 inch round bbl., blue/casehardened
finish, walnut stock. Only 1,002 of these carbines were manufactured in 1864 and early 1865. They were
delivered shortly after the end of the Civil War. It has the standard markings and features.
CONDITION: Very good plus overall with 20% original blue and casehardened finish, mottled gray and brown patina on the balance, a chip on the right side of
the forend, scattered marks and dings consistent with use throughout, and some minor handling/storage wear. Mechanically fine.
Estimate: 2000 - 3000
LOT 152
Very Fine Providence Tool Co. Peabody Single Shot Military Rifle - NSN, 45
cal., 33 inch round bbl., blue/casehardened finish, walnut stock. Produced by the Providence Tool Company
circa 1866 - 1871. Originally developed during the Civil War, many of these rifles were exported for foreign military use,
and this rifle has the “WC” cartouche on the stock used on the exported rifles and carbines. It also features blade front and
folding ladder rear sights, German “crown/V” on-hand proofs on top of the barrel and frame at the breech, small inspection marks, and
“PEABODY’S PAT./JULY 22, 1862/MAN’F’D BY/PROVIDENCE TOOL CO./PROV. R.I.” on the left side of the frame.
CONDITION: Very fine with 85% original blue and 90% vivid casehardened finish and minor wear such as light scratches and marks. The
refinished wood is also very fine and has some small dents and scratches, some minor flakes at the tail of the lock, and light overall wear.
Mechanically excellent.
Estimate: 2000 - 3000
147

"One of the Greatest Men of
the Age" - Ulysses S. Grant,
April 30th, 1862

Major General Henry
Wager Halleck
LOT 153
Recently Discovered, Historic, Documented Tiffany & Co.
Silver Civil War Officer’s Sword with Columbia Figural Hilt and
Scabbard Inscribed to Major General Henry W. Halleck Just Five
Months Before He was Promoted by Lincoln to General-in-Chief
of All of the Union Armies - This incredible officer’s sword from
Tiffany & Co. of New York was presented to Union Major General
Henry Wager Halleck (1815-1872). The presentation inscription on
the scabbard between the suspension bands reads: “Presented/to/
Major Genl. H. W. Halleck./by the/Ladies of St. Louis. Mo./March 1862.”
The reverses of the scabbard has “TIFFANY & CO.” in a banner over
“QUALITY/925.1000” (sterling silver). The scabbard ornamentation
primarily consists of floral patterns along with a classical “green
man” mask on both sides of the upper band. The langet has Hercules
strangling the Nemean lion. The finial is a ram’s head. The knuckle
bow is decorated with knotted snakes surrounding Medusa’s severed
head (known as a gorgoneion, a classic apotropaic emblem). The
grip has a classical
design of a stand of
arms over a helmeted
soldier’s head and
wreath on the right
side and a winged
horn with stars over
the goddess Pheme/
Fama (goddess/
personification of
fame and renown) on
the left. The pommel
is a bust of Freedom/
Columbia. The blade is
32 3/4 inches long, has
fullers at the tip, “U.S.”
among the etching on
the left, “WARRANTED
TO CUT/WROUGHT
IRON” on the left
ricasso, a patriotic
eagle and “E PLURIBUS
UNUM” motif among
the etching on the
THIS IS THE SAME SWORD PICTURED
IN THIS PHOTO
right, and “TIFFANY
& CO./NEW YORK” on
the right ricasso. It
is illustrated and documented in “Pictorial History of the Civil War
in the United States of America Volume 2” from 1868 by Benson
John Lossing. “The women of St. Louis, desirous of testifying their
admiration of General Halleck, in whose Department and by whose
troops these victories had been achieved [referencing Union
victories in the Western Theater of the war, particularly the fall of
Fort Donelson] (and because of his energy in suppressing secession
in Missouri), ordered an elegant sword to be made by Tiffany &
Co., of New York, to be presented to him in their name. This was
done in the parlor of the Planters’ Hotel in St. Louis, on the evening
of the 17th of March, 1862, by Mrs. Helen Budd, who spoke on
behalf of the donors. In his brief reply, General Halleck assured the
women of St. Louis that it should be ‘used in the defense of their
happiness, their rights, and their honor, and solely in behalf of justice.’
The weapon was an elegant one, richly decorated with classical
designs.” It can be seen worn by Halleck in a period portrait available
through the Library of Congress as well a similar carte de visite. It
was presented the same month President Abraham Lincoln gave
Halleck command of all Union forces between the Missouri River and
Knoxville, Tennessee, (Department of the Mississippi) and just five
months before Halleck was promoted to general-in-chief of all of the
Union armies. The location of the presentation, the Planter’s House
Hotel, was significant. The hotel hosted many illustrious guests in
the period and was also the sight of a failed attempt by Missouri
Governor Claiborne Jackson on June 11, 1861, to partition the state
between the Unionists and Secessionists that resulted in the internal
civil war between Missourians early in the war. It is also recorded
in the German language Westliche Post of St. Louis on March 18,
1862, which confirms it was presented by Helen W. Budd and lists
it as valued at $400. She was born in 1844 and was the daughter of
George Knight Budd (1802-1875), a wealthy businessman originally
from Philadelphia who came to St. Louis in 1835. Unfortunately little
is known about her, but her father was well-connected and involved
in local politics and financial institutions, including the Boatmen’s
Savings Institution which he helped form to aid the working class
in St. Louis and counted Ulysses S. Grant among their depositors.
During the war, Budd purchased and sold Union war bonds to
support the war effort. Another Tiffany & Co. officer’s sword was
presented by Halleck to William Tecumseh Sherman for his success at
the Battle of Shiloh and resides in the Smithsonian National Museum
of American History (accession number: 59388). Halleck, a graduate
of the U.S. Military Academy at West Point in 1839, was among the
U.S.’s greatest military minds in the antebellum and Civil War eras.
149

Ulysses S. Grant, originally one of Halleck’s
subordinates, called him “one of the greatest
men of the age,” and Sherman called him the
“directing genius.” He was an officer in the Engineer
Corps and assistant professor of Engineering at
West Point in the 1840s. His report, “The Means
of National Defence” in 1843 was widely lauded
and was published at the request of the Senate.
He studied European fortifications in 1844, gave
lectures on military tactics, and published his
research as “Elements of Military Art and Science”
which essentially became the textbook used
by generals during the Civil War. His studies of
fortifications and defensive actions led him to
be a cautious commander more keen to hold his
ground than chase the enemy. He was stationed
in California during the Mexican-American War
and drafted California’s state constitution. He
was offered a position at Harvard but declined
and instead remained in the Engineer Corps but
ultimately resigned in 1854 to pursue a more
lucrative career in law and business, including as
president of the Pacific and Atlantic Railroad and
the Almaden Mining Company. He accepted
the position as major general of California’s
militia in 1860 as war loomed on the
horizon. When he rejoined the U.S. Army
in 1861, he received the same rank,
which placed him among the five
highest ranking generals in the Army.
That same year, he also published
another book, “International Law, or
Rules Regulating the Intercourse of
States in Peace and War.” Of particular
note in relation to the presentation
of this sword, Halleck was sent to
St. Louis to replace John C. Fremont
as commander of the Department of
the Missouri and arrived in November.
He immediately set to work weeding out
corruption and set down harsh measures to
end the bitter partisan violence in Missouri and
succeeded in preventing the state from seceding
outright and joining the Confederacy. Some of
his measures, such as censoring the press, were
undoubtedly unconstitutional but helped secure
the state. While Union forces in the Eastern Theater
suffered humiliating defeats early in the war. The
Western Theater in the first two years saw more
Union success on the battlefield, and Halleck and
his officers, such as Ulysses S. Grant, led the Union
in multiple victories and secured the western
border states and the Mississippi River, including
the surrender of Fort Donelson on February 16,
1862, to General Ulysses S. Grant which led to the
loss of 13,846 Confederate troops, mostly captured
or missing. The victory thrilled Union supporters
and terrified the Confederate government and led
to accolades for Grant and Halleck, his superior
officer. These victories were important for the
Union war effort and morale. In July of 1862, he
was promoted to general-in-chief of all of the
Union armies and held the position until replaced
by General Ulysses S. Grant in March of 1864. Due
to his calculating mind and well-known studies
noted above, he was known as “Old Brains.” The
nickname was used derisively but was accepted
by Halleck. In addition to his scholarly works, this
moniker reflected his headstrong, cautious, and
exacting nature. When Grant replaced him as
general-in-chief, he became Grant’s chief of staff,
a role more suited to his personality and strategic
mind, and ensured Grant’s armies were supplied
and able to finally defeat the Confederate armies.
Though Lincoln had complaints about Halleck’s
cautious approach to the war, Halleck was one
of Lincoln’s pallbearers. Halleck remained in the
service during Reconstruction, and, given he was
an exceptional military administrator, he was
made the commander of the Military Division of
the South based in Louisville, Kentucky, and was
working in that role when he died on January
9, 1872, after spending nearly his entire adult
life in the service of our country. He left
considerable wealth behind from his
business and land speculation ventures
to his wife, Elizabeth, a granddaughter
of Alexander Hamilton, and his
only son, Henry Wager Halleck
Jr. Halleck is arguably one of
the most influential military
strategists of the Civil War and
held multiple top commands
and remained influential
through the war’s end. Where
the sword went after his
death is not clear. His son
died young, and his wife
remarried and lived in New
York. The sword was only
recently rediscovered in the
attic of a home in northwestern
Indiana near Chicago and appears
to have been essentially untouched
for decades. How the previous family
acquired it is unknown at this time.
CONDITION: Very fine in genuine “out
of the attic” condition with dark, nearly
black, patina on the vast majority of the
external surfaces, crisp etching and only
minor surface pitting on the very fine bright
blade indicating it has rarely been removed
from its scabbard over the last 158 years, and
distinct designs on the hilt which has mild age
and storage related wear. The scabbard is also
mostly untouched aside from a few dents in the
midsection, one of which has resulted in a slight
hole, and displays the crisp historical inscription,
multiple design elements, and the Tiffany & Co.
banner. This sword is easily the most significant
recently discovered Civil War officer’s swords we
have ever had the pleasure of bringing to auction.
Halleck was one of just four generals-in-chief of
the Union Armies, and one of the greatest military
minds of his generation.
Estimate: 35000 - 55000
150

AS PICTURED AND
DESCRIBED IN THE BOOK
PICTORIAL HISTORY OF THE
CIVIL WAR IN THE UNITED
STATES OF AMERICA
VOLUME 2 BY LOSSING
151

1863 Cyrus Alger
24-Pounder
Howitzer
152
LOT 154
Scarce Civil War 24-Pounder Iron Flank
Howitzer Manufactured by Cyrus Alger & Co.
in 1863 - These 24-pounder flank or “siege and
garrison” howitzers were mainly used to defend
the flanks of forts and were run by teams of three
men. Fifty 24-pounder iron howitzers, divided into
a pair of twenty-five piece lots, were purchased by
the U.S. Ordnance Department from Cyrus Alger &
Co. on August 28, 1863, (see “Purchases of cannon,
ordnance, projectiles, and small-arms since April
13, 1861, by the Ordnance Department...” page
710), and the company sold over $2,600,000 to
the government in April 20, 1861 - March 25, 1867.
The consignor indicated this was one of the first
ten flank howitzers delivered by Alger. Several
hundred of these howitzers were made in the
1840s-1860s and stationed at various forts around
the country, and many remain on display at the
forts and historic sites. The muzzle is marked “No
306” (registry number), “C.A. Co.” (Cyrus Alger & Co.),
“1486” (weight), “1863” (year of production), and
faint inspection letters (very likely “TJR” for Thomas
Jackson Rodman). “US” is marked on top near the
trunnions. Includes two trunnion straps.
CONDITION: Good overall with oxidation, pitting,
and moderate wear throughout including some
red on the cascabel.
Estimate: 13000 - 19000

SIMILAR EXAMPLE
ILLUSTRATED IN THE
ILLUSTRATED CATALOGUE
OF MILITARY GOODS
LOT 155
Elaborate Presentation Grade Officer’s Sword with Scabbard Inscribed to Captain
Augustus Hoelzle of Battery K Artillery of the 1st Division of the National Guard of the
State of New York - This sword was probably sold by Schuyler, Hartley & Graham of New York.
The pattern is pictured in their 1864 catalogue in figures 13 and 16. Rather than have a standard
blade, the lightly curved 32 inch blade has “B.K.” (Battery K) on the left side among the etching
and a patriotic motif based on the Great Seal of the U.S. on the right among floral patterns. The
spine has “IRON PROOF,” and the etching has gold washed backgrounds. The hilt is an interesting
pattern with a lounging rendition of Liberty/Columbia holding a bald eagle along with a star and
globe on the guard, mostly floral motifs elsewhere, and an eagle and shield motif on the back of the pommel. A
golden sword knot is tied to the knuckle guard. The cast silver grip is unusual for a U.S. sword given its pattern
includes the Mexican eagle and snake motif on the right. The scabbard has elaborate fittings with various designs
including Medusa’s head over some cannon balls and is inscribed “Presented to/Capt. August Hoelzle/by the
Members and Ex Members/of Battery K Artillery,/1st Div. N.G.S.N.Y.” August Hoelzle (1834-1896) of New York
City was a lawyer. His unit was established in April 1867 as Battery K of the First Regiment of Artillery with John
Heubner as their leader, but First Lieutenant Augustus Hoelzle took over the same year and was commissioned
captain of Battery K of the 1st Division with rank from March 14, 1877. They were a mounted field artillery unit
of mainly German-American men. When the rest of the First Regiment was discontinued in 1869, Battery K
continued on alone. They served during the Great Railroad Strike of 1877. 1,000 strikers went to jail and around
100 were killed during the widespread strikes around the country. New York escaped some of the more dramatic
violence, perhaps in part due to their highly organized and professional National Guard units which were among
the best in the country. Battery K became the First Battery in late 1881. Hoelzle was succeeded by Louis Wendel
after his resignation in October 1882.
CONDITION: Fine overall with mostly bright blade exhibiting traces of original gold, some slight pitting/staining,
slightly bent tip, and mild wear. The hilt and grip have untouched dark aged patina naturally found on items that
have been well cared for but not cleaned. The sword knot has mild wear. The scabbard has aged patina, crisp
designs, and traces of silver plating. This is a very attractive National Guard sword from the last quarter
of the 19th century.
Estimate: 8000 - 14000
153

154
LOT 156
Civil War Clauberg Officer’s
Sword with Scabbard Presentation Inscribed to
Lieutenant William H. Proctor from Co. F of the 24th
U.S. Colored Troops - The sword has 32 inch lightly curved
blade with patriotic etching on both sides, “IRON PROOF” on
the base of the spine, and the Clauberg maker’s mark on the
left ricasso. The guard has a finely detailed bald eagle and
“US” which are detailed on both the outside and inside. The
base of the guard is also engraved near the handle which
is finely sculpted silver plated brass with grape leaf and
star patterns. The pommel has oak leaf and acorn patterns
and a pine cone style cap. The scabbard has floral pattern
brass hardware, twisted rope style suspension rings, a silver
plated body engraved with oak leaf and acorn patterns
and the inscription “Presented to/Lieut W. Proctor/by/Co.
F. 24th USCT” between the suspension bands. Lieutenant
William Henry Proctor (b. 1840-1917) of Fair Haven, Vermont,
enlisted on October 8, 1861, in Company E of the famous
2nd United States Sharpshooters (Berdan’s Sharpshooters) as
a Sergeant and was promoted to 1st Sergeant in September
1862. He was listed as a student when he enlisted and
was studying at Middlebury College. He fought at Second
Bull Run, Fredericksburg, Chancellorville, and Gettysburg.
He was transferred to the 6th Veteran Reserve Corps in
December 1863. On March 3, 1865, he was appointed
Second Lieutenant of the African American 24th Regiment of
the United States Colored Troops and served in that position
until September 30th, 1865, which served at the Point
Lookout Prisoner of War camp and were later stationed in
Virginia. After the war, he moved to the Midwest (Michigan,
Kansas, and possibly Nebraska) before returning to
Vermont where he served in the legislature in
1890-92 and worked
as a special examiner
and clerk in the Bureau of
Pensions from 1893 to 1916. He was
buried in his home town.
CONDITION: Fine overall with fairly bright blade showing
some minor speckling and some small nicks at the
edges of the blade, absent
leather washer, mostly aged
patina on the hilt, traces
of silver plating on the
grip, aged patina on
the scabbard body,
crisp engraving
and designs
throughout, and generally
only mild wear. Overall, this
is a beautiful and historic
sword connected to a
Union officer who served
in both the famous Berdan
Sharpshooters and the 24th
U.S. Colored Troops.
Estimate: 7500 - 12000

LOT 157
Rare U.S. Inspected
Massachusetts Arms
Adams Patent Double Action Navy
Revolver Serial Number 15 - Serial no. 15, 36 cal., 6 inch
round bbl., blue finish, checkered, cartouched walnut grips.
Manufactured from 1857 to 1861. Blade front and notch rear sights,
with the Kerr’s Patent marking on the loading lever, the Mass. Arms
address on the top strap and “ADAMS.PATENT/MAY 8th 1853” on
the left side of the frame. Equipped with a
sliding safety, single letter proofs on several
parts and circled cartouches on both sides of
the one piece grips with a brass grommeted
lanyard hole in the center.
CONDITION: Very good, with strong traces
of original blue mostly contained in the
protected areas with the balance a mixed
brown and gray patina along with scattered minor pitting. The grip
is fine with mostly intact cartouches. Mechanically fine.
Estimate: 2750 - 4250
LOT 158
Scarce Blued Remington Model 1875 Single Action
Army Revolver in Desirable .44-40 W.C.F. - Serial no. 464, 44-40
WCF cal., 7 3/8 inch round bbl., blue finish, walnut grips. This model was
also known as the Improved Army or Frontier Army, and 25,000-30,000
were manufactured from 1875 to 1889 in Remington’s main attempt to
compete with Colt’s Single Action Army. The Model 1875 is a classic Old West firearm. Most
were nickel plated making blued examples particularly desirable. It has a “pinched” front sight,
top strap groove rear sight, “E. REMINGTON & SONS. ILION. N.Y. U.S.A.” on top of the barrel, “44
W.” on the left grip, and a lanyard ring on the butt. Matching serial numbers are on the loading
gate, trigger guard, grip frame, and grips.
CONDITION: Very good with 20% original blue finish concentrated in the protected areas, smooth gray and
brown patina on most of the balance, some light oxidation and pitting, and general mild wear. The grips are also
very good with light scratches and marks, and mild edge wear. Mechanically functions fine.
Estimate: 2500 - 3750
LOT 160
Remington New Model Army Percussion Revolver with
Carved Grip - Serial no. 30434, 44 cal., 8 inch octagon bbl., blue finish,
carved grips. Manufactured 1864-1875. Standard markings other than the
lack of the “NEW MODEL” at the end of the barrel address. The cone front
sight has been replaced during period of usage by a dovetailed round
blade front sight. Single letter inspection marks throughout. Eagle and snake Mexican style
relief carved left grip panel. Matching serial numbers on the barrel, cylinder, and grip frame.
CONDITION: Fine, retaining 60% original blue finish with areas of thinning and light oxidation
and a cylinder drag line. The grips are very good with some age cracking and a repaired chip
on the left panel away from the eagle motif. Mechanically excellent.
Estimate: 2250 - 3500
LOT 161
U.S. Inspected Early
Production Two digit Serial Number 62 Rogers
& Spencer Army Model Percussion Revolver - Serial no. 62, 44
percussion cal., 7 1/2 inch octagon bbl., blue finish, walnut grips. 5,000
of the estimated 5,800 manufactured were produced under contract for
the U.S. Government in early 1865, but they were delivered too late to see
use in the Civil War. Most were sold via Bannerman’s in the early 20th century.
This example has standard single letter “B” inspection marks
throughout and the “RPB” cartouche of inspector Captain R. P.
Barry on the left grip. The barrel, loading lever, cylinder, frame,
and butt have the matching serial number. The barrel has a
threaded post front sight, and the top strap has the standard
markings and the groove rear sight.
CONDITION: Very fine, showing 70% original high polish blue
with most of the flaked loss concentrated on the grip straps
and cylinder. Areas of brown patina in the blue with mostly
silvered out case colors showing traces in the protected areas. The grips have a crisp cartouche, show some edge
wear, otherwise are very fine. Mechanically excellent.
Estimate: 1800 - 2750
LOT 159
U.S. Remington New Model Army Metallic
Cartridge Conversion Revolver - Serial no. 120211, 45 CF cal.,
8 inch octagon bbl., blue finish, walnut grips. Manufactured c. 1863-1875
and later converted (likely by the factory) for metallic cartridges. It has
a “pinched” blade front sight, center fire modified hammer, the standard
barrel markings, top strap groove rear sight, an ejector
on the right side of the barrel, single letter government
inspection markings throughout, cartouche on the
left grip, and matching serial numbers on the barrel,
trigger guard, grip frame, and interior face of both
grips. “x7” stamped on the left side of the loading lever
and left side of the frame. “182” stamped on the face of
the six shot cylinder.
CONDITION: Fine as converted to metallic cartridge, retains 50% period, possibly factory reapplied, blue finish
and an attractive antique patina on the trigger guard with the balance a brown-grey patina, primarily on the
frame. The grips are also fine with minor dings and scratches scattered throughout and a clear cartouche.
Mechanically excellent.
Estimate: 1600 - 2500
LOT 162
Fine Remington New Model Army Cartridge
Conversion Revolver with Scarce Rollin White Patent
Marking - Serial no. 143247/3278, 44 RF cal., 8 inch octagon bbl., blue
finish, walnut grips. In 1868, Remington began converting percussion
revolvers for use with metallic cartridge skirting by the Rollin White patent
issue through a partnership with Benjamin Kittredge who paid Smith & Wesson $1 for each
converted revolver. Only 4,575 revolvers were converted ahead of the expiration of White’s
patent in April 1869. This revolver has the White patent marking: “PATENTED APRIL 3d 1855”
on the side of the cylinder and “7” on the right side of the barrel and frame and front of the
cylinder. The barrel has the standard “pinched” blade front sight and markings on top. “3278” is on the bottom
at the muzzle and on the left side of the front strap. The grip frame also has “52” on the back strap on the left
and “3158” on the back strap on the right. The matching original serial numbers are found on the bottom of the
barrel, the trigger guard, and left side of the butt. The grip numbers are a bit faint but appear to match.
CONDITION: Fine with 50% original blue finish, smooth brown finish on the faded areas, 80% original silver
plating on the trigger guard exhibiting dark aged patina, minor oxidation, and general mild wear concentrated
on the barrel, cylinder, and grip straps. The grips are also fine and have mild edge wear, light scratches, and minor
dings. Functions, but is missing the half cock notch in the hammer.
Estimate: 2000 - 3000
155

Phenomenal, Rare & Historically Significant Orville Ainsworth Inspected Colt U.S. Cavalry
Single Action Army Revolver Issued to the Indian Fighting 4th Texas Cavalry
The Corner Stone Collection
LOT 163
Extraordinary and Well-Documented Finest Known Ainsworth Inspected Company K 4th Cavalry San Antonio
Texas Arsenal U.S. Colt Single Action Cavalry Model Revolver with John Kopec Gold Seal Letter - Serial no. 3576,
45 LC cal., 7 1/2 inch round bbl., blue/casehardened finish, walnut grips. This is an exceptional and rare U.S. Contract Colt
Single Action Army Cavalry Model Revolver that was manufactured in 1873. This revolver was inspected by Ordnance
Sub-Inspector Orville W. Ainsworth and is stamped with his distinctive small “A” sub-inspection mark on the underside of
the barrel, the trigger guard, back strap, cylinder, and left stock heel. Ainsworth’s script initials “OWA” are stamped in a rectangle
on the lower left side of the grip. The revolver is boldly stamped with the unit marking “CO.K.4.CAV” upside-down on the right side of the
frame. Ainsworth-inspected 4th Cavalry marked Colt Single Action Army Cavalry Model revolvers are discussed on pages 17-18 of “Colt
Cavalry & Artillery Revolvers” by John A. Kopec. Kopec states that he identified 15 Ainsworth inspected Single Action revolvers with the
“CO.K.4.CAV” marking. The serial numbers of these revolvers range from No. 2902-No.4596. Kopec states that all of these revolvers were
ordered by the Ordnance Department on January 15, 1874 and were shipped to the San Antonio Arsenal. The serial number of this revolver
is not included in the 15 revolvers on Kopec’s list, as this example was found subsequent to the research. The accompanying John Kopec
gold seal letter authenticates this Cavalry Model SAA as being issued to the 4th Cavalry. Kopec proclaims, “The overall finish of this revolver
remains unbelievable!” The revolver is also accompanied by a detailed description (copy) by Colt expert R.L Wilson which extensively quotes
the descriptions of Ainsworth-inspected Cavalry Single Action Revolvers in “Colt Cavalry and Artillery Revolvers”. Wilson states, “In condition
and originality, no revolver equals, or surpasses number 3576.” The revolver has a military blue finish on the barrel, ejector housing, cylinder,
trigger guard, and back strap. Feathered polishing marks are visible on the barrel on either side of the front sight blade. The frame, loading
gate and hammer are casehardened. The one piece walnut grip has an oil finish. The revolver has the early “bullseye” ejector rod head,
cylinder with small stop slots and military style hammer with elongated bordered knurling on the spur. The top of the barrel is roll-stamped
with the early script address: “+ “COLT’S PT. F.A. MFG. CO. HARTFORD. CT. U.S.A.+”. “P” proof marks are stamped on the underside of the barrel
and on the side of the cylinder. A “C” Colt sub-inspection mark is stamped in the hammer well above the firing pin hole.
156
4TH CAVALRY TROOPERS AND THEIR APACHE SCOUTS GUARDING A SOUTHWESTERN
WATER HOLE DURING THE GERONIMO CAMPAIGN

The Corner Stone Collection
COMANCHE CHIEF QUANAH PARKER
CHEYENNE LEADERS LITTLE WOLF AND DULL KNIFE
The left side of the frame is marked with the two-line, two patent date markings followed by the “U.S.” property mark. The inside of the loading gate is
stamped with the assembly number “904”. The full serial number “3576” is marked on the bottom of the frame, trigger guard, back strap, and the side of
the cylinder. The full serial number is also stamped on the left side of the ejector rod housing near the rear ejector rod slot (this, in itself, is a rare feature)
with the numbers being smaller than the serial numbers on other components. Also included with this revolver is a letter (copy) from the late Ronald A.
Ogan that states “In my opinion, this revolver is the finest Ainsworth inspected, U.S. Army marked, Single Action known to exist”. The documentation also
includes a detailed history of the 4th Cavalry regiment and the 4th Cavalry’s campaigns against the Comanche and Kiowa during the early 1870s under
Colonel Ranald S. Mackenzie. The 4th Cavalry is one of the most famous and decorated U.S. regiments. During the Indian Wars the 4th Cavalry took an
active role in the pacification mission in Texas, including a major campaign against the Comanche in northern Texas in 1874, marched with General
Crook to locate Chief Dull Knife and his Cheyenne forces, and fought the Apache in Arizona.
158

“The overall finish of this revolver remains unbelievable” John Kopec gold seal letter, 2014
The Corner Stone Collection
CONDITION: Excellent plus, as issued. The evaluation by R.L. Wilson that accompanies the revolver states: “In condition and
originality, no revolver equals, or surpasses number 3576. The color of the blue, the patina of the steel and wood, the old grease
from years’ past, and the clouded color the case-hardening (excepting on the relatively bright hammer) are all indicative of the
attic condition, unused survival of this remarkable and rare Single Action Colt revolver”. This is a once-in-a-lifetime opportunity
for the discriminating collector to own an Ainsworth inspected 4th Cavalry marked Colt Cavalry Model Single Action Army
Revolver described as the best example available by two nationally recognized experts on Colt revolvers. The inclusion of this
U.S. Colt SAA enhances any collection. This is the king of all U.S. Colt Single Action Cavalries!
Provenance: The Corner Stone Collection.
Estimate: 85000 - 150000
159

BOTH SIDES PICTURED
LOT 164
Extremely Rare 1903
Dated U.S. Model 1902 Krag
Bolo Bayonet - Developed in the
early 20th century, the 1902 Bolo Bayonet
was one of the U.S. Army’s attempts at a hybrid weapon
that could reduce the loadout an individual soldier had
to carry into the field. Intended for use in
jungle environments, the bolo could
serve as both a bayonet and a
brush clearing tool. This
was designed to take the
place of the Bowie Bayonet,
which had been an earlier attempt to
solve the same problem but “proved ineffective
for utilitarian tool functions undoubtedly required of it” per A. N. Hardin on page 216 of his book “The American
Bayonet: 1776-1964”. Like many such weapons, the 1902 was made in very limited quantities for trial use, with the
Philippines in particular the planned test field (though no proper records of the testing survive). Overall production
SIMILAR EXAMPLE PICTURED AND
DESCRIBED IN THE BOOK THE AMERICAN
BAYONET BY HARDIN
is limited to 50 in 1902 and six in 1903. 14 3/4 inches overall, with a 10 1/4 inch blade dated “1903” on the left ricasso (making this bayonet one of the even rarer variation) and marked
“US” on the right. Standard Krag style bayonet hilt. With a blued steel sheath with a ball tip and 100 degree swiveling steel belt loop.
CONDITION: Extremely fine. The exceptional blade shows a correct bright polished finish with some light oil stains and sheath retraction wear. Some mild spotting on the hilt and guard
as well as moderate pitting. The sheath is fine, with areas of brown patina and some light scattered pitting. Of the six 1903 dated examples made, this definitely could be the finest
example! This likely could be your only chance to obtain this extraordinary variant of U.S. bayonet!
Estimate: 20000 - 30000
BOTH SIDES PICTURED
160
LOT 165
Scarce and Desirable U.S. Model 1900
Krag Bowie Bayonet with Sheath - Produced
(and dated) for trial in 1900, as a replacement for the standard
bayonet which could pull double duty as a brush knife. Measuring 13 1/2 inches overall, the 9 inch
blade has a deep back clip and a 2 1/2
inch sharpened edge on
the spine, with “US” on the
right ricasso and “1900” on
the left. All of the metal is bright,
with standard Krag bayonet hilt.
Includes a full metal sheath, which
features the distinct ball tip and
100 degree belt swivel.
CONDITION: Excellent. The excellent blade has the original armory bright polish, a few streaks from
sheath retracting, and some areas of light pitting. There is some pitting on the mounting hardware.
As issued for trial as the blade is unsharpened. The sheath shows 85% blue finish with some patches
of spotting on the hanger.
Estimate: 3000 - 5000
SIMILAR EXAMPLE PICTURED AND
DESCRIBED IN THE BOOK THE AMERICAN
BAYONET BY HARDIN

Investment Quality Springfield Model 1875 Trapdoor Officer's Rifle
LOT 166
Outstanding U.S. Springfield Armory Model 1875 Trapdoor Officer’s
Rifle - NSN, 45/70 Govt. cal., 26 inch bbl., blue/casehardened finish,
walnut checkered pistol grip stock. This scarce and desirable Mode 1875
Trapdoor Officer’s Rifle was manufactured by Springfield Armory c. 1885.
This Type III Officer’s Rifle is one of 100 rifles manufactured in 1885 which
feature a 5/8-inch longer stock, square profile nose cap and “SWP/1885”
final inspection mark on the left stock wrist. The rifle has a 26-inch barrel
secured by a single band, walnut half-stock with checkered forearm, wrist,
detachable checkered pistol grip and nickel-silver nose cap. The rifle has a
hickory cleaning rod with un-plated brass tip and slotted ferrule, oval base
vernier tang sight mounted on the stock wrist, buckhorn rear sight, folding
combination globe front sight and single set-trigger. The barrel, barrel
band, receiver and buttplate have a commercial quality blue finish. The
‘low-arch’ breech block, lock plate, hammer and carbine style trigger guard
are color casehardened with vivid case colors. The nose cap, top of the
barrel band, top of the receiver, breech block, lock plate, hammer, barrel
tang, trigger guard and buttplate heel are engraved with well executed
open scrollwork. The lock plate is roll-stamped with the Springfield Eagle/
Shield motif followed by “U.S./SPRINGFIELD” in two lines. The top of the
breech block is roll-stamped: “U.S./MODEL/1878”. The top of the barrel is
stamped with a “P” proof mark between the rear sight and the receiver
and the left side of the barrel is stamped with “V/P/Eagle Head/P” proof
and inspection marks. “U.S.” is stamped on the buttplate heel behind
screw. An encircled, script, “P” proof mark is stamped on the bottom of the
stock behind the checkering. The Model 1875 Officer’s Model Rifle was
manufactured by Springfield Armory to provide Army officers with a high
quality sporting-grade rifle that utilized the .45-70 service cartridge. The
Model 1875 Officer’s Model were available for private purchase by officers;
a total of 477 rifles were manufactured between 1875 and 1885. The
Model 1875 Officer’s Rifle displayed the high degree of craftsmanship
that characterized rifles manufactured by Springfield Armory during the
19th Century.
CONDITION: Excellent. This exceptional rifle is all original and retains 95%
plus of the original high quality blue finish. The blue finish on the barrel
shows some thinning on the top between the rear sight and the receiver.
The buttplate has finish wear on the contact
points on the heel and toe. There are several
very minor age spots on the right side of
the barrel near the muzzle. The breech
block, lock plate, hammer and tang retain
98% plus of the vivid original case colors.
The case colors on the trigger guard are
muted but remain at least 95% intact. The
vernier sight has 90% plus of the high polish
blue finish. The stock and pistol grip are in
excellent condition with crisp checkering.
At least 95% of the original varnish remains
intact. The “SWP/1885” inspection mark and
encircled “P” proof mark are crisp. Stock wear
is limited to a few very insignificant handling
and storage marks. This is an exceptional
example of an extraordinary U.S. Springfield
Model 1875 Trapdoor officer’s Rifle that
would be difficult to improve upon.
Estimate: 25000 - 37500
161

Absolutely Sensational, Benchmark Quality, “As-Issued” Frank Heath Inspected
Colt U.S. Cavalry Single Action Army Revolver
The Corner Stone Collection
LOT 167
Extraordinary 1885 Production U.S. Colt Single Action Cavalry Model Revolver with Factory Letter
and Kopec Gold Seal Letter - Serial no. 114973, 45 Colt cal., 7 1/2 inch round bbl., blue/casehardened finish,
walnut grips. This nearly new condition Colt Single Action Cavalry Model revolver was manufactured in 1885
and inspected by Capt. Frank Heath and Ordnance Sub-Inspector David F. Clark. The revolver is complete with a
Colt Factory Letter and a Letter of Authentication from John A Kopec. The Colt letter identifies the caliber of this
revolver as .45/c and the finish as blue and states that it was delivered to the U.S. Government Inspector at the
Colt Plant on September 23, 1885. The Kopec letter states that this revolver is in original unissued condition and
speculates that it was originally issued to a state militia unit where it remained unissued until it was returned
to Springfield Armory following World War I and sold as surplus or distributed through the Director of Civilian
Marksmanship. The revolver has the Colt military blue finish on the barrel, ejector housing, cylinder, trigger guard
and back strap. The feathered factory polishing marks are clearly visible on either side of the front sight blade and
above the ejector housing stud. The frame, hammer and loading gate have a color casehardened finish with strong
case colors. The trigger and screws have a fire blue finish. The one piece walnut grip is oil finished. The
ejector rod has the second style oval head used on U.S. contract Single Action revolvers from about serial
number 113,000 to the end of production. The cavalry style hammer has elongated, bordered knurling on
the spur. The top of the barrel is roll-stamped with the fourth style, elongated block address “COLT’S PT. F.A.
MFG. Co. HARTFORD CT. U.S.A.” The Colt three-line/three-date patent markings are roll-stamped on the left
side of the frame. The assembly number “306” is stamped on the inside of the loading gate. The full serial
number is stamped on the bottom of the frame, trigger guard and back strap. The partial serial number
“4973” is stamped on the barrel beneath the
ejector housing and on the side of the cylinder.
All of the visible serial numbers match. The “U.S”
property mark is stamped on the left side of
the frame behind the patent dates. Small, block
letter, “D.F.C.” ordnance sub-inspection marks are
stamped on the underside of the barrel, on the
frame above the serial number, on the side of the
cylinder and on the left grip heel. “P” proof marks
are stamped on the underside of the barrel and
side of the cylinder.
162

The Corner Stone Collection
The left side of the grip is stamped
with the date “1885” above the
Ordnance final inspection mark which
consists of the encircled script initials
“FH”. The Ordnance sub-inspection mark
which consists of the scrip initials “DFC” in a rectangle
with rounded ends is stamped on the lower right side of
the grip. A Colt block “G” sub-inspection mark is stamped below
the serial number on the trigger guard and back strap. Colt “P” and “J” sub-inspection
marks are stamped in the hammer well above the firing pin hole. Small “O, G”, and “J” Colt subinspection
marks are stamped on the barrel immediately below the ejector housing stud. The
initials “EJB” are lightly scratched above the “U.S” property mark on the left side of the frame.
CONDITION: Excellent plus. The revolver appears to be as issued and remains in nearly new
condition with 97% plus of the original Colt military blue and color casehardened finish. Finish
wear is limited to traces of loss at the muzzle and leading edge of the ejector housing, some
light turn marks between the cylinder stops and faint handling marks on the back strap and
trigger guard. The screws retain nearly all of the fire blue finish and are in perfect condition.
The Colt barrel legend, patent markings and serial numbers are extremely crisp. The Ordnance
sub-inspection marks are equally sharp. The “U.S” property mark on the frame is lightly struck
which, as the Kopec letter notes, is correct for revolvers in this serial number range. The walnut
grip is excellent plus and retains all of the original oil finish. The date and Ordnance final
inspection and sub-inspection marks are perfect. Wear on the grip is limited to several very
minor storage marks. The action functions perfectly. This is almost certainly the best Capt.
Frank Heath inspected, U.S. contract Colt Single Action Cavalry Model revolver ever offered for
sale by the Rock Island Auction Company and one of the very best Colt Single Action Cavalry
Model revolvers extant. It would be almost impossible to upgrade this superb revolver.
Provenance: The Corner Stone Collection.
Estimate: 80000 - 140000
164

The Definition of Investment Quality: an Exceptionally Fine Example of the Most Iconic
19th Century American Firearm
The Corner Stone Collection
165

BOTH SIDES
PICTURED
LOT 168
Desirable U.S. Ainsworth
Inspected Colt Cavalry Model
Single Action Army Revolver - Serial no. 7387, 45 LC cal., 7 1/2 inch round bbl.,
blue/casehardened finish, walnut grips. Manufactured in 1874. O.W. Ainsworth’s
desirable “A” inspector mark is found on the barrel, trigger guard, back strap, and
cylinder. A “P” proof is found on the barrel and cylinder. David F. Clark’s sub inspection
“DFC” stamp is on the bottom of the later production replacement grip. Both sides of the grip have
script letter cartouches. The barrel has the one-line Hartford address. Matching serial numbers are
on the frame, trigger guard, back strap, cylinder and barrel. The loading gate has the assembly
number “540.” Based on serial data complied by Kopec and Fenn, this revolver falls into the 6517-7527
serial number range of Cavalry Models issued to the 3rd and 7th Cavalries. This group of Cavalries
was shipped from Springfield Armory in May 1874. Ainsworth physically inspected SAA revolvers
recorded in the serial number range 200 through 14343. This was the first major block of U.S. Cavalry revolvers.
CONDITION: Good. Heavy amounts of original blue remain on and around the ejector rod housing, otherwise traces of original blue
and case colors remain in the other sheltered areas with the balance a smooth brown-gray patina. The period removed patent date
and “U.S.” frame markings are no longer visible. The refinished replacement grip is good with a couple chips near the bottom, minor
handling marks and faint cartouches. Mechanically excellent.
Estimate: 5500 - 8500
BOTH SIDES
PICTURED
166
LOT 169
Fine U.S. Colt Artillery Model Single Action
Army Revolver - Serial no. 119759, 45 LC cal.,
5 1/2 inch round bbl., blue/casehardened finish,
walnut grips. The DFC inspected frame dates to 1887 and
has the three-line patent dates marking followed by “US” on
the left side. The top of the barrel has the one-line Hartford
address marking. The revolver has mixed numbers (cylinder
is unnumbered) as is typical of Artillery variants.
The grip is stamped with “RAC” inspector initials on the bottom and a “RAC” script letter
cartouche on the right side.
CONDITION: Fins as Colt factory refurbished. 70% blue finish remains with a mixture of
thinning to a brown and smooth gray patina on the balance. 40% case colors remain
on the hammer and frame. The grip is also fine with a divot on the bottom, high edge
wear and minor handling marks. The cartouche is legible. Mechanically needs work as
hammer retracts, but is missing the half cock notch.
Estimate: 4000 - 6000

LOT 170
Colt Reproduction Model
1877 “Bull Dog” Gatling
Battery Gun with Tripod
- Serial no. 5, 45-70 cal., 18
1/4 inch round bbl., bright/
black finish. This museum
quality Model 1877 “Bulldog”
Gatling Gun reproduction
was manufactured by U.S.
Armament Corp. in limited
quantities c. 2009. Possibly
as few as 50 were made
and sold through Colt or a
distributor. Colt was the original
manufacturer of a similar gun in
the late 19th century. The Model
1877 was the first Gatling with
fully enclosed housing around the barrels and breech and had
a rear mounted hand crank that could be cranked in reverse to
clear a jam. The U.S. Armament Corp.’s specifications list the rate
of fire at 800 rounds per minute and the weight of the gun at
135 pounds not including the tripod. It was built using original
Gatling diagrams and specifications. It is marked “MODEL/1877”
to the left of the Bruce gravity feed device. The sights are on the
right side and are graduated out to 1,000 yards. “No 5 “ is marked
near the right trunnion. The bronze plaque on the top of the
action at the rear has the standard Colt markings. The tripod has
ash legs and brass and iron fittings.
CONDITION: Excellent, showing mostly bright brass, more that
half of the slightly thinned blue finish, and retaining almost all
the original deep black enamel on the iron parts of the tripod
with the balance some scattered attractive antique patina on
the brass. The wood is also excellent with some scattered light
handling marks. Mechanically excellent.
Estimate: 18000 - 27500
The John Fox Collection
167

Iconic & Exceptional
The Finest Colt 1890
Exposed Barrel Gatling
Gun Extant
The Gateway Collection
LOT 171
Extremely Rare, Phenomenal, Historically Significant and Iconic
Exposed Barrel U.S. Colt Model 1890 Gatling Gun on an Original
Carriage - Serial no. 505, 45-70 cal., 32 inch round cluster bbl., bright
finish. This is the finest known example of a Colt Model 1890 Gatling
Gun extant, mounted on an original field carriage. The Model 1890 was
essentially an improved version of the Model 1883. In 1889 Gatling
returned to the well proved classic design of the exposed barrels as
used in the Indian Wars. Some of the improvements included a device
called the “Murphy Stop” (a cocking switch), a new type carriage and the
hopper was interchangeable with the special Bruce feed or use of the old
style gravity feed magazine. Similar to the Model 1883, the Murphy stop
allowed the gunner to disengage the cocking mechanism while unloading
the gun and during training exercises without ammunition.
168

The Gateway Collection
The control knob was in a more convenient location on the cascabel plate and
operation was more positive since the knob had to be pulled out as well as turned.
This model features ten 32 inch 45-70 barrels, (5 inches of the muzzle end are
octagon), has an overall length of 49 inches and weighs approximately 200 pounds
without the carriage and has a rate of fire of 525 rounds per minute. Essentially all
models manufactured from 1889 to 1892 were identical. The breech end of each
barrel is numbered 1 through 10, proofed “V/P/eagle head” and “R.A.C.” (Rinaldo
A. Carr) inspected. The breech end of the breech housing is marked with the
corresponding barrel number. Each barrel toward the breech end is marked with the
matching assembly number “14”. The top of the frame ahead of the barrels is also
marked “R.A.C.” and “14”. The sights are mounted on the right side of the frame. The
rear of the magazine feed port is marked “PATENTED/FEB. 11, 1890/R.A.C.” The top rear
of the breech housing is “R.A.C.” inspected over a fabulous hand engraved legend,
more than likely by the hand of Cuno Helfricht himself: “Gatling Gun/Patented/Manfd
at/COLT’S ARMORY/Hartford Conn. U.S.A./MODEL 1890/No 505 CAL 45/SEB”(Capt.
Stanhope E. Blunt). The breech end face of each bolt is marked with a “P” inspection
mark. The gun is mounted on the original iron yoke.
169

The Gateway Collection
170

Museum Quality
Dr. Richard Jordan
Gatling, Inventor of the
Gatling Gun in 1862
According to “The Gatling Gun” by Wahl and Toppel, the U.S. Army
purchased 18 Model 1889 Gatling Guns in the serial range 492 to 509
which includes this gun (see page 119). This gun was manufactured
in 1890 and is therefore marked “MODEL 1890”. The U.S. Army also
purchased 17 Model 1891s and 18 Model 1892s. These were the
last 45-70 Gatling Guns ordered by the U.S. Government. The gun is
mounted on a barracks green painted carriage with an equipment/
ammunition box mounted on either side of the gun and iron
banded wooden wheels. The end of each wheel hub is cast with the
manufacturer Archibald Wheel Company, Lawrence, Mass. The Gatling
Gun had a huge impact on the battlefield and changed the face of
war forever.
CONDITION: Excellent. The breech housing remains bright and
the very fine armory bright barrels have a smooth gray patina. All
of the markings and engraving remain crisp, clear and original.
The carriage exhibits period applied paint and much remains with
some flaking on the wheels and top of the equipment/ammunition
boxes. Mechanically excellent. The iron hardware retains most of the
attractively crazed black paint. The Magazine is absent. We proudly
present the finest known U.S. Government Model 1890 Gatling Gun,
one of only 18 purchased by the U.S. Government and one of the last
45-70 caliber Gatling Guns purchased by the U.S.
Provenance: The Gateway Collection.
Estimate: 275000 - 425000
The Gateway Collection
171

BOTH SIDES
PICTURED
LOT 172
Desirable Documented Colt Bisley Flattop Target Model Revolver with Extremely Rare “FOR
.32-44 S&W CTG.” Marking with Factory Letter - Serial no. 195467, 32-44 cal., 7 1/2 inch round bbl.,
blue finish, hard rubber grips. Manufactured in 1900, this is one of only 976 Bisley Flattop Target revolvers
manufactured by Colt between 1894 and 1913, and one of only 17 Bisley Target Model revolvers reportedly chambered for the 32-44 S&W
cartridge, making this revolver even rarer. The accompanying factory letter lists this revolver with a 7 1/2 inch barrel in .32-44 caliber, blue finish and
stocks not listed when shipped to Hibbard, Spencer, Bartlett & Co. of Chicago, Illinois, on May 2, 1900. The barrel has the one-line Hartford address on
top and “(BISLEY MODEL) FOR 32-44 S & W CTG.” on the left side. The left side of the frame is marked with the two-line, three patent date marking
followed by the circled Rampant Colt. Matching numbers are marked on the frame, trigger guard, and back strap. The rear face of the cylinder has
the matching last three digits (“467”) of the serial number. The revolver features pinned front blade and dovetailed rear sights, all blue finish with the
exception of the casehardened hammer, and distinctive flattop frame.
CONDITION: Fine. The revolver retains 40% plus bright original high polish blue finish with the balance a smooth brown patina. There are some scattered
minor-moderate handling/storage marks. The sun faded grips are also fine with some minor handling evidence and crisp checkering overall. Mechanically
excellent. A rare caliber of the Bisley Target model usually absent from even the most advanced Colt collections.
Estimate: 7500 - 11000
BOTH SIDES
PICTURED
Collector’s Fact
According to The 36
Calibers of the Colt Single
Action Army, only 17 Bisley
Target Model revolvers were
produced for the 32-44
S&W cartridge.
172
LISTED BY SERIAL NUMBER IN THE
BOOK THE 36 CALIBERS OF THE COLT
SINGLE ACTION ARMY BY BROWN
LOT 173
Exceptionally Scarce Documented
Battle of Britain First Generation Colt
Single Action Army Revolver - Serial no. 356273, 45
LC cal., 5 1/2 inch round bbl., nickel finish, hard rubber grips. This excellent first generation Colt
Single Action Army Revolver was manufactured in 1938 and is one of 163 Single Action Army revolvers
that were sold to the British Purchasing Commission by Colt along with other revolvers and automatic
pistols in an emergency effort by the British to replace the small arms lost during the Battle of France in
May 1940. These guns were shipped to Winchester and then exported to Great Britain. The barrel has the one-line
Hartford address on top and the model/caliber designation on the left side. The left side of the frame has the two-line
patent dates marking followed by a Rampant Colt, and the left side of the trigger guard is marked “4V” above the
Colt triangle proof. A British broad arrow acceptance mark is stamped on the left shoulder of the back strap. “Crown/
GP” proofs are stamped on the cylinder behind each flute.
The underside of the barrel has British nitro proof marks and
import marking. Matching serial numbers are on the frame,
both grip straps and both grip panels. This revolver is listed
by serial number as one of 17 nickel plated Battle of Britain SAAs with a 5 1/2 inch barrel in .45 LC in David
Brown’s “The 36 Calibers of the Colt Single Action Army” on page 28.
CONDITION: Excellent, retaining 90% plus with flaking of the plating visible on both sides of the forward
frame and cylinder, some flaking light scratches, and scattered minor handling marks. The grips are also
excellent with some surface nicks along the high edge, some minor handling marks and crisp checkering
overall. Mechanically excellent. A high condition example of one of the only 163 SAAs shipped to Britain in
preparation for an expected Nazi invasion.
Estimate: 7500 - 10000
Collector’s Fact
Only 17 of the 163
revolvers purchased by
the British Purchasing
commission were in
this configuration.
SERIAL NUMBER
356273

BOTH SIDES
PICTURED
LOT 174
Excellent and Desirable Colt Etched Panel New
Police 38 Revolver with Attractive Pearl Grips - Serial
no. 17858, 38 Colt New Police cal., 4 1/2 inch round bbl., nickel finish, pearl grips. Colt only manufactured about
4,000 New Police Revolvers from 1882 to 1886. They were the final model introduced in the New Line series. This
exceptional example was manufactured in 1884. The top of the barrel is marked with the two line address and the
acid etched panel “NEW POLICE 38” on the left side. The left side of the frame is marked “38 CAL” and the serial number appears on the butt.
The barrel and cylinder have London proofs. It features blade front and frame notch rear sights, niter blue small parts, “Bullseye” style ejector
rod head, and smooth pearl grips.
CONDITION: Excellent with distinct exceptional original acid etched panel, 98% untouched original nickel, 90% bright original niter blue finish
on small parts, and minimal handling and storage wear. The grips are also excellent aside from a small chip at the toe on the left and a small
spot near the toe on each grip. Mechanically excellent. Easily one of the finest Colt New Police Revolvers extant.
Estimate: 6000 - 9000
BOTH SIDES
PICTURED
LOT 175
Documented Factory Engraved Colt 2nd Model New Line .38 Revolver with Desirable 4
Inch Barrel and Pearl Grips - Serial no. 10984, 38 Long Colt cal., 4 inch round bbl., nickel/gold
finish, pearl grips. This revolver was manufactured in 1879 and has “P” and “E” flanking the serial
number under the left grip which most likely are assembly markings indicating the factory intended the revolver
to have pearl grips and factory engraving. The revolver features intertwining scroll engraving with punch-dot backgrounds and
accents including a floral bloom on the side plate. The top of the barrel has “COLT’S PT. F. A. MFG. Co/HARTFORD. CT. U.S.A.”, and
the bottom of the barrel has “PAT SEPT 15 1874” and the matching serial number. The back of the cylinder has the matching
partial serial number “984.” The loading gate has “418.” The left side of the frame is marked “38 CAL C”. The cylinder is gold washed,
and the small parts are niter blued. The revolver is pictured and identified in R.L. Wilson’s “The Book of Colt Firearms” on
page 304 and “Colt Pistols, 1836…1976” on page 158.
CONDITION: Very fine with 95% plus original nickel plating, 70% plus period replated gold wash on the cylinder, strong
original niter blue on the small parts, mild dings and scratches, bent front sight, and general mild wear. The grips are
also very fine and have mild overall wear including some scratches. Mechanically excellent.
Estimate: 2250 - 3750
AS PICTURED AND DESCRIBED
IN THE BOOKS COLT PISTOLS
1836 - 1976 & THE BOOK OF
COLT FIREARMS BY WILSON
173

BOTH SIDES
PICTURED
LOT 176
Exceptional Retailer Cased Factory Engraved Colt No. 1 Derringer - Serial no. 4138, 41 RF cal., 2 1/2 inch flat top round bbl., blue/
silver finish, steel grips. Colt’s No. 1 Derringer was manufactured from 1870 to 1890 after the purchase of the National Arms Company
which had previously manufactured this model. It was first manufactured by Moore’s Patent Firearms Co. in the first half of the 1860s.
These along with the similar No. 2 derringers were the first single shot pistols manufactured by Colt. This pistol appears to have gone to
London and then on to Madras, India. The bottom of the barrel has London proofs, and the period case has a P. Orr & Sons trade label
with a “MADRAS” address. It also contains a cartridge block with fifteen cartridges and a cleaning rod/screwdriver. The front sight is a
nickel round blade, and the barrel is marked “+COLT’S PT.F.A. MFG. Co./HARTFORD CT. U.S.A. No 1 +.” The hammer has a groove which
serves as a rear sight, and the frame has flourishes of scrollwork on the sides and knurled panels on the grip.
CONDITION: Exceptionally fine with 85% plus original high polish blue and 95% original silver finish, patches of flaking exhibiting
either gray or brown patina on the exposed metal, some minor pitting on the left side of the frame, and mild overall wear. Mechanically
excellent. The case is very good and has mild storage wear and some repaired cracks in the lid.
Estimate: 3000 - 5000
BOTH SIDES
PICTURED
174
LOT 177
Desirable First Year Colt Cloverleaf House Model Revolver with
Notarized Former Texas Rangers Foundation Letter and Historic
Research - Serial no. 2067, 41 RF cal., 3 inch round bbl., nickel finish,
varnished walnut grips. This revolver’s low serial number places its date of
manufacture around 1871 (the first year of production). It has the standard markings
and features including matching serial numbers. The included affidavit states that
the revolver was given to the writer by the Deputy Police Chief of Beaumont, Texas,
after a series of Texas Ranger raids in the “Golden Triangle” of Beaumont, Port Arthur,
and Orange, Texas, due to rampant illegal gambling, prostitution, numbers rackets, murders, and more that
was ignored or supported by local law enforcement and officials. This pistol was loaded when the Rangers
took possession of it which is surprising given the very outdated ammunition used in these Cloverleaf
revolvers which were one of Colt’s first two cartridge models. Chief Bauer said the pistol was
confiscated in the raid of the Dixie Hotel on Crockett Street in Beaumont and was given to him
by the Ranger who found it “behind the soap dish in the kitchen of the old ‘Cat House.’” Bauer may
have been an undercover operative for the Rangers and thus partially responsible for bringing down many of the
corrupt government officials. An included article on Bauer states he became an officer in 1938, sergeant in 1941,
detective in 1943, and captain in 1949. In 1950 he went to the FBI National Academy and became Beaumont’s
Assistant Chief of Police. After the conviction of many Beaumont and area officials, Bauer
served as Chief of Police from 1961 until 1984. Also included are articles on the
Dixie Hotel and Texas Ranger Captain Johnny Klevenhagen.
CONDITION: Very fine. 85% plus of the original nickel plating remains. The
flaking is primarily isolated to the front of frame, and there are some minor
marks throughout. The grips are fine with a chip at the top of the left panel
and moderate surface wear on the right panel. The markings are crisp, and
the action functions fine.
Estimate: 2500 - 4000
SERIAL NUMBER 2067
FIRST YEAR PRODUCTION
Important
Historic Note
This 1st year production Colt
Cloverleaf House revolver was
confiscated by Texas Rangers
in Beaumont, Texas around
the mid-1900s.

BOTH SIDES PICTURED
LOT 178
Alligator/Horse/Longhorn Decorated Josiah
Barnes & Company Sheffield Bowie Knife with
Sheath - Measuring 14 3/8 inches overall, the 8
3/4 inch long drop point blade features the Barnes
trademark of a snake eating it’s own tail over
“DURATION” on the left ricasso, along with
“JOSIAH BARNES/SHEFFIELD”. The hilt is of
German silver construction, fitted with a pair of
smooth horn grips (blank inscription shield on
one side), a longhorn steer on either side of the
guard, and a half-horse/half-gator on both sides of
the pommel. Gold embossed brown leather sheath,
missing German silver tip.
CONDITION: Very good. The blade is bright and polished, with mild spotting and
handling marks. The edge has been brought back slightly by sharpening, the hilt shows
some bending/denting of metal, and the sheath is missing tip.
Estimate: 4500 - 7000
LOT 179
Texas-Themed Wilson Swift Sheffield Dagger with
Sheath - Measuring 11 1/4 inches overall, with a 6 3/4
inch double edged spear point blade, with one side
etched “*TEXAS*/NEVER*SURRENDER” and the ricasso
marked “WILSON SWIFT/BROAD ST/SHEFFIELD”. The
tang runs the full length and width of the hilt, with a
pair of horn grip scales, German silver guards in a fleurde-lis
pattern, and a Mexican-style eagle devouring a
serpent on either side of the pommel. With a brown
leather sheath.
CONDITION: Good. The blade shows a mixed gray
patina, with shallow pitting and edge nicks. The etching
is still legible. Some play has developed in the hilt
panels, which also show some dents and verdigris. Tears
and staple repairs are present on the leather.
Estimate: 1600 - 2500
BOTH SIDES
PICTURED
175

Rare, Important & Fresh Factory Engraved & Plated Colt New Line from the Iconic 1876 Philadelphia Centennial Exposition
THIS REVOLVER IS LISTED BY
SERIAL NUMBER ON THE OCT. 15,
1877, LEDGER LISTING REVOLVERS
RECEIVED BY HENRY FOLSOM &
CO. FROM AND RETURNED TO
COLT THAT WERE PREVIOUSLY
PART OF COLT’S FAMOUS “WHEEL”
DISPLAY AT THE 1876 PHILADELPHIA
CENTENNIAL EXPOSITION
176
LOT 180
Documented Cased Factory Engraved and Gold
Plated Colt New Line .41 Revolver with Pearl
Grips from Colt’s “Wheel” Display at the 1876
Centennial Exposition in Philadelphia - Serial no.
5009, 41 RF cal., 2 1/4 inch round bbl., nickel/gold
finish, pearl grips. This revolver was manufactured
in 1876, the same year the World’s Fair was held in
the United States for the first time in celebration of
the centennial of the Declaration of Independence
and the founding of the Unite States. Fittingly, the
Centennial Exposition was held it Philadelphia.
The fair presented a tremendous advertising
opportunity for American arms companies like Colt
and Winchester. Both displayed elaborate exhibition
arms and took in orders, including for high end
deluxe arms. Colt’s famous display was perhaps
the factory’s most spectacular display in its history,
and Colt’s smaller pocket revolvers were highly
represented given they were just the type of firearms
suited to those living in and visiting the bustling late
19th century cities. This revolver is listed by serial
number on the Oct. 15, 1877, ledger listing revolvers
received by Henry Folsom & Co. from and returned
to Colt that were previously part of Colt’s famous
“wheel” display at the 1876 Philadelphia Centennial
Exposition (copy of list included). The display was
built in Hartford specifically for the exposition and
received a lot of attention both at the World’s Fair
itself and into the 21st century as collectors eagerly
seek out the historic Colts that made up Colt’s most
famous display. It is shown in multiple publications
about Colt firearms, including Wilson’s books (for
example, see page 172 of “Colt: An American Legend.”
The “wheel” revolvers were later loaned to the Henry
Folsom Co. of St. Louis and were returned to Colt in
October 1877. Some remain in the Colt Collection at
the Museum of Connecticut History. The engraving
was probably executed by Cuno Helfricht and
consists of punch-dot backed intertwining vine
scroll and floral engraving along with checker board
patterns and diamond pattern accents. It has the
standard blade and groove sights. The barrel is
marked “COLT’S PT. F. A. MFG. CO./HARTFORD, CT.
U. S. A.” The bottom of the grip frame is marked “41
CAL.” Matching serial numbers are on the bottom
of the barrel, rear of the cylinder, and left side of
the grip frame. The latter also has a “P” marking. The
grips are pearl. The case has purple velour lining, a
cleaning rod, and cartridge block holding 25 rounds
of ammunition.
CONDITION: Exceptionally fine with 85% plus
original nickel plating, 50% plus original gold
plating, bright original niter blue on most of the
screws, crisp engraving and markings, bent front
sight, minor dings and scratches, and mild overall
wear. The grips are also fine and have tiny flakes at
the junction with the frame and otherwise minor
handling wear and attractive iridescent colors.
Mechanically excellent. The otherwise fine case has
a split in the lid and moderate overall wear. This
is both a rare and highly desirable piece of Colt
history. Very few collectors get the opportunity to
own a Colt revolver featured in the famous “Wheel.”
Provenance: Colt’s display at the 1876 Centennial
Exposition in Philadelphia, Henry Folsom & Co., Colt
Patent Fire Arms Mfg. Co., and Dr. Robert G. Cox.
Estimate: 9000 - 14000
PROVENANCE: COLT’S DISPLAY AT THE 1876 CENTENNIAL EXPOSITION IN PHILADELPHIA,
HENRY FOLSOM & CO., COLT PATENT FIRE ARMS MFG. CO., AND DR. ROBERT G. COX

DALTON GANG KILLED
FOUR OF THEM MADE TO BITE THE DUST
Coffeeville, Kansas, October 5th, 1892
The Gateway Collection
178
LOT 181
Documented Historic Factory Engraved Black
Powder Colt Single Action Army Revolver
From the Personal Property of Bob Dalton
Documented to Have Been Taken From His
Dead Body After the Famous Coffeyville Raid
Accompanied by an Unprecedented Amount
of Documentation - Serial no. 147307, 45 Long
Colt cal., 5 1/2 inch round bbl., blue/casehardened
finish, pearl grips. Rock Island Auction Company
is excited and proud to present this astonishing
revolver, its extraordinary pedigree, documentation,
its beauty and condition, the Bob Dalton Colt Single
Action Army. The Dalton Gang is now considered
one of the last of the notable frontier outlaw gangs
that stalked the lawless American West. According
to Emmett Dalton, the raid on Coffeyville and its
audacious simultaneous two bank hold up was Bob
Dalton’s attempt to one-up the reputation of Jesse
James and the James & Younger Gang. Having this
sense of history as part of their grand plan, specially
engraved revolvers were purchased by the Dalton
Gang from the Colt factory to not only out do the
James & Younger Gang but to do so in flamboyant
style. Accompanied by a letter from world famous
author and Colt firearms expert R.L. Wilson in which
he writes: “for more than 60 years the writer has
been a keen collector and student of the American
West and of historic and fine firearms. In all that
period he has yet to encounter a treasure trove
such as the saga of the Dalton Gang Colt Single
Action Army Revolvers.” Further Wilson writes, “The
documentation of serial number 147307 as one of
the pair of Bob Dalton’s Colt Single Actions carried
on that fateful and historic day is in a classification
of it’s own in the annals of firearms used by outlaws
and lawmen in the Wild West.” This revolver is
accompanied by extensive documentation including
a Colt factory letter, articles in periodicals, affidavits,
death records, sales receipts from the sale of the
Dalton’s property, an original copy of the Elmira
Daily Advertiser, from Elmira, N.Y. dated Thursday
October 6, 1892, a copy of Frank Latta’s “Dalton
Gang Days,” and a copy of Emmett Dalton’s “Beyond
the Law.” Three notarized affidavits are as follows:
One is from Edwin B. Neale and states that Bert
Read loaned this revolver number 147307 to the
Dalton Museum around 1960. The two discussed
the gun around 1960 and Mr. Neale was told that
the gun was purchased at the auction held to sell
the possessions taken from the Daltons that were
killed during the bank robberies in Coffeyville,
Kansas on October 5, 1892. The gun was purchased
by Read’s father H.W. Read who owned H.W. Read’s
Department Store. A sign was made up to be
displayed with the gun in the museum showing the
owners as Mr. Bert Read and John Read Neale, and
the sign also accompanies this revolver. The gun
was displayed at the Dalton defenders Museum
until the fall of 1991. The second affidavit is from
Barbara Read Neale the granddaughter of H.W.
Read, daughter of Joe Read and niece of Bert Read
who inherited the gun when H.W. Read died and
also states the gun was on display until the fall of
1991 when it was removed by John Read Neale for
personal reasons. The third affidavit is from Maurine
Read the wife of Joe Read which states that the gun
was inherited by Bert Read and gives a brief history
of the H.W. Read’s Department Store which was
founded in 1872 and was still operating in 1892 the
time of the infamous Dalton raid. All three identify
the gun by serial number and explain the reason
for the gun being left to John Read Neale because
he was the last male heir to have the name “Read”
in his name. There is also a notarized history of the
revolver and explains that the gun was purchased at
the auction selling the Dalton possessions by a W.H.
Clark who bought the gun for H.W. Read. A copy
of the original probate court record lists 4 items
sold at that auction including “1 colt 45 Revolver”
to Clark. There is a copy of part of the page from
the Coffeyville Journal January 12, 1893 listing a
number of items sold at the auction including “Bob’s
revolver to W.H. Clark” for $31.00. There is a copy
of the original Affidavit of Death for Robert Dalton
which lists personal items taken from him after his
death, which among the items lists “six shooters”.
There is a receipt acknowledging receipt of “Bob
Dalton’s Gun” by John R. Neale from the Coffeyville
Historical Society Dalton Defenders Museum on
September 23, 1991 which was authorized by the
Board of Directors of the Society. There is a copy of
the Affidavit of Death for Richard Broadwell. Two
photos of the four dead gang members laid out
for public viewing, one with Bob’s Winchester lying
across he and his brother Grat and two photos of the
C.M. Condon Bank.

The Gateway Collection
180
As Pictured and
Described in The Colt
Engraving Book,
Volume I by Wilson
There is an article written by Bill Gerber in the June 1995 addition of “The Gun Report”
who did a lot of research into the Dalton revolvers. He had traded a mint cased Texas
Paterson for an engraved, pearl gripped 45 caliber, 5 1/2 inch barrel black powder
single action serial number 147,307. After the trade, he was told by the previous
owner that it was consecutively serial numbered to the Emmett Dalton gun which
was pictured in R.L. Wilson’s book “The Peacemakers” that was on display at the Gene
Autry Museum. He also learned of this revolver which was on loan at the time to the
Coffeyville museum. Three of the ten, serial number 147,305, 147,306 and this revolver
147,307, have been identified and authenticated as being in the Dalton’s possession
and part of a 10 revolver shipment sold to an A.E. Williams and shipped to Simmons
Hardware company in St. Louis, Missouri, on August 18, 1892. Several revolvers in
the order were consecutively serial numbered. Knowing that Colt did not engrave a
bunch of consecutively serial numbered guns and ship them to various dealers lends
credence to the shipment being a special order. Also with a short time for the gang
to get the guns he is logical to think it was planned. One can conclude that since the
guns were sold to an individual and not a wholesaler that it was no accident that the
guns ended up in the hands of the Dalton Gang. Very few outlaws in the day were
known to carry fancy gripped engraved revolvers let alone a pair, (10 guns, 5 gang
members). It was risky business in those days to stock 10 factory engraved, pearl
gripped revolvers for sale to the general public, which would probably mean that A.E.
Williams had a specific buyer in mind. Williams may have even been an alias or possibly
an agent for the Daltons. The shipment date didn’t leave the gang much lead time on
the Coffeyville Raid; however, it is interesting to note that Bob’s rifle was shipped from
the Winchester factory on August 27, 9 days later than the Colt shipment and only 39
days ahead of the raid, and as noted above, the rifle has been pictured with the bodies
of the four gang members killed that day. Interesting enough Grat, Emmett and Bob
Dalton served on the right side of the law prior to becoming criminals, serving as
deputy marshals. Emmett worked as a member of some of his brothers posses, but for
the most part he earned a living as a cowboy on the Bar X Bar Ranch near the Pawnee
Agency. Working there he met two of the gang’s future members and met future gang
members working at nearby ranches. The gang made a living from robbing trains
before planning the famous “Coffeyville Raid” which proved to be the gang’s Waterloo.
Around 9:30 am five members of the Dalton Gang (Grant, Emmett, and Bob Dalton,
Bill Power and Dick Broadwell) rode into Coffeyville, Kansas with the plan of making
outlaw history by robbing two banks at the same time. The plan was doomed from
the beginning. The hitching post where they intended to tie the horses had been torn
down because of road work, and they were forced to tie the horses in a nearby alley,
which proved to be a fatal mistake. Since Coffeyville was the Dalton’s hometown, two
of the Dalton’s wore fake beards and wigs to disguise their identity, however they were
immediately recognized by townspeople as they crossed the town plaza and split up
to enter the First National Bank and The C.M. Condon Bank. People also watched from
the front windows of the banks and saw the gang pulling their guns. Someone on the
street hollered “The bank is being robbed”, and citizens quickly armed themselves and
began taking up firing positions. The ensuing gun battle lasted less than 15 minutes,
and when the smoke settled, four citizens lay dead, three gang members were dead in
the alley (Grat and Bob Dalton and Bill Power), Dick Broadway was found dead along
the road about a half mile out of town, and Emmett was captured and survived despite
having received 23 gunshot wounds. The alley where they tied the horses became
know as “Alley of Death”, and the event made the small town of Coffeyville, Kansas,
famous. Emmett Dalton was sent to prison, was paroled in 1907 and died in 1937.
The revolver is decorated with floral scroll and punch dot engraving on the barrel and
frame. A scallop and dot design border the one line address on top of the barrel and
the “45 Colt” on the left side is in a banner
CONDITION: Extremely fine. The revolver retains 40% plus bright original blue
finish, concentrated mainly on the bottom of the barrel, protected areas of
the ejector housing, cylinder flutes and forward area of the trigger guard.
There is a smooth brown patina on the balance. The frame shows half of the
original case colors in the protected areas with a smooth brown patina on
the balance. The grips are excellent with a very small chip on the right toe.
The markings and engraving remain crisp and clear. The action is excellent. A
piece of history that may not come to public auction again for many years, if
ever again. Writer believes this to be the finest original documented Outlaw
Colt Single Action Army revolver to be offered at auction!
Provenance: The Gateway Collection.
Estimate: 350000 - 550000

BOTH SIDES
PICTURED
LOT 182
Very Fine Documented Colt Bisley Flattop Target
Revolver with Factory Letter - Serial no. 319667, 32 WCF
cal., 7 1/2 inch round bbl., blue finish, hard rubber grips.
Manufactured in 1911. This is one of only 976 Bisley Flattop
Target revolvers manufactured by Colt between 1894 and
1913. It has the correct blue frame and target sights. The barrel has the one-line Hartford
address on top and “(BISLEY MODEL) 32 W.C.F.” on the left side. The left side of the frame has
the two-line patent dates marking followed by the Rampant Colt. The left side of the trigger guard has a double struck
Colt factory verified proof (factory error). Matching serial numbers are found on the frame, both grip straps and both grip
panels. The matching assembly number “17” is stamped on the loading gate and frame. The accompanying factory letter
lists this revolver as a target model with a 7 1/2 inch barrel in .32-20, blue finish and type of stocks not listed (as was the
practice by Colt). It was sold to Jas S. Fennell and shipped to Logan-Gregg Hardware Co. of Pittsburgh, Pennsylvania, on
January 16, 1913 in a two gun shipment.
CONDITION: Very fine. The revolver retains 85% plus bright original
high polish blue finish with the balance a mottled brown-gray
patina. The hammer retains 70% original case colors, and the
trigger retains traces of original niter blue. The grips are excellent
with a few minor dings and scratches and crisp checkering overall.
Mechanically excellent.
Estimate: 7500 - 12000
182
BOTH SIDES
PICTURED
LOT 183
Documented Colt Bisley Model Single Action Revolver in Very Scarce .32 Colt with Copy of
the Factory Letter - Serial no. 195146, 32 Colt cal., 7
1/2 inch round bbl., blue/casehardened finish, hard
rubber grips. Manufactured in 1900. This revolver is
one of only 160 Bisley model revolvers chambered
in .32 Colt. One-line Hartford address on top of the
barrel, “(BISLEY MODEL) 32 COLT.” on the left of the
barrel, two-line patent dates and circled Rampant
Colt on the left of the frame, and matching numbers
on the frame, trigger guard, and back strap, and unnumbered grips. The last three digits (146) of the
serial number are stamped on the rear face of the cylinder. The included copy of the factory letter
confirms the .32 Colt caliber with grips not listed as well as shipment to William Read & Sons in Boston,
Massachusetts on 12 April 1900.
CONDITION: Fine, retains 70% original blue finish and 50% original case colors with the balance a browngrey
patina. The chocolate colored grips are very fine with some light handling marks, light wear, and
well-defined checkering. Mechanically excellent.
Estimate: 3500 - 5000

LOT 184
Rare Documented Michael
Price San Francisco Belt Knife
with Sheath with History - Born
in Limerick, Ireland, Michael Price
was himself the son of an Irish
knifemaker, and in the 1850s
decided to take his chances in
the New World. Exact estimates
on when he arrived in San Francisco and
how he established himself are varied; some have him earning his initial capital as a water pipe foreman,
others have him setting up in the corner of the shop of A.J. Taylor, arms dealer and Deringer
agent. By 1860 he was a top name in the California market, producing a full spectrum from
the tough but simple knife of the settler or prospector to the finely furnished but still deadly
sidearm of the urban gentleman and were advertised as being able to be driven through a
stack of three silver dollars without losing the point or edge. This particular Price specimen is a
fine belt knife, 10 1/4 inches long overall, with a 5 3/4 inch dao-type clip point blade marked “M.PRICE/
SAN FRANCISCO” on the left ricasso. The tang is full length and contoured to match the
smooth antique ivory grips. The sheath is of plain leather construction with
a simple tooled border and integral belt loop. Includes a note from the
consignor indicating the knife originally belonged to Caspar Thomas
Hopkins as well as a copy of Hopkins’ autobiography.
CONDITION: Very good, the blade mostly bright with evidence of mild
cleaning/sharpening and some scattered light patches of pitting/spotting.
The grip is fine with a few cracks around the pins, some scattered light
handling marks, and generally minimal wear. The sheath is also fine with some
mild wear and age cracking. A rare knife from a very desirable California maker!
Estimate: 7500 - 15000
BOTH SIDES
PICTURED
LOT 185
Copy of San Francisco Will & Finck Belt Knife with Oyster Shell Handle and
Engraved Sterling Silver Scabbard - Establishing their partnership in 1863 and
operating out of San Francisco, Frederick Will & Julius Finck were involved with
nearly every sort of manufacture and merchandising one could imagine, most famously
gambling equipment (of both the straight and crooked varieties) and knives. Producing a full
spectrum of edged tools and weapons, Will & Finck blades were often rated the finest in the city.
Measuring 10 inches in overall length, this dagger is equipped with a 6 1/4 inch single edged
drop point blade, with the ricasso bearing the “WILL&FINCK/S F CAL” address on the left side. The
hilt is constructed from German silver, with a low profile oval guard and a set of smooth oyster
shell grip scales. The sheath is of silver construction with an integral belt loop and light floral
scroll and zig-zag pattern engraving with a blank shield. The scabbard is sterling
hallmarked on the belt clip.
CONDITION: Fine as custom made, the blade showing mostly a bright grey patina with some
evidence of sharpening, some scattered patches of light surface pitting, and some scattered
brown patina. The is good with vibrant color, some hairline age cracking, and some scattered
minor chipping. The scabbard is very good showing an attractive antique patina overall with
some scattered light dents and dings. If it were original, it would bring
many times the estimate!
Estimate: 2000 - 3250
BOTH SIDES
PICTURED
183

Exceptional Pair of Colt Thuer Deringers with Rare Picture Box
LOT 186
Exceptional Pair of Colt “Thuer” Third Model Derringers with Extremely Rare Factory Box
-A) Colt Third Model Derringer - Serial no. 44206, 41 RF cal., 2 1/2 inch round bbl., nickel finish,
walnut grips. Colt manufactured these Third Model derringers from 1870 to 1912, and they were
Colt’s most popular single shot pocket pistols. This exceptionally high condition pair has the later
sloped hammers, round blade front sights, “-COLT-” on top of the barrels, London proofmarks on
the bottom of the barrels, nickel-plated barrels and frames, casehardened hammers, niter blue
remaining small parts, and smooth varnished grips hand numbered to the pistols. They come in
an extraordinarily rare box designed to hold the pair. It has “h/s/-” over “Pair” written on one of the
wooden rods inside and inside the bottom of the carton. The lid has the Rampant Colt trademark
and “COLT’S/41 Cal./BREECH-LOADING/DERINGER.”
CONDITION: Excellent with 98% plus original nickel plating, essentially all of the bright original
niter blue and case colors on the small parts, light scratches, and minimal overall wear. The grips
are also excellent aside from a small flake absent on the right at the toe. Mechanically excellent. The
incredibly rare box is fine and has distinct markings, minor repairs, moderate edge wear, a small
piece absent on the right flap of the lid, and a few small tears. B) Colt Third Model Derringer -
Serial no. 40318, 41 RF cal., 2 1/2 inch round bbl., nickel finish, walnut grips. See “A”.
CONDITION: Excellent with 98% plus original nickel plating, essentially all of the original case colors
and niter blue on the small parts, and minimal handling and storage type wear. The grips are also
excellent and have only minor edge and handling wear. Mechanically excellent. This amazing pair
may be the only pair complete with a Colt box. All Colt boxes from this era are rare, and boxes for
the Colt derringers are especially so. They are rarely even seen let alone offered for sale.
Estimate: 10000 - 18000
185

Extremely Rare & Well-Documented Colt "Buntline Special" Single Action Revolver
186
LOT 187
Extremely Rare Documented 10-Inch Barrel Colt “Buntline
Special” Single Action Revolver with Skeletal Shoulder
Stock - Serial no. 82402, 44-40 CF cal., 10 inch round bbl., nickel
finish, walnut grips. Colt Single Action revolver with carbine length
barrel (“Buntline Special”) and attachable stock. This revolver is
accompanied by a Colt factory letter that describes the revolver
as caliber .44-40 with nickel finish and states that it was shipped
to Hartley & Graham in New York on September 24, 1882. The
letter further states: “It is our opinion that this pistol was originally
shipped with the 10” Buntline barrel, having the etched marking
“COLT FRONTIER SIX SHOOTER” and notes that the 7 1/2 inch barrel
length in the description was a mistake by the shipping clerk
because the other 49 revolvers in the 50-gun shipment had 7 1/2
inch barrels. Also included with the revolver are a copy of a 1992
letter from antique Colt dealer Tommy Rholes and a 1980 dated
letter from author and Colt Single Action expert, Ron Graham (“A
Study Of The Colt Single Action Army Revolver”). Both letters state
that the writers examined this revolver and found it to be factory
original. The revolver has a full nickel-plated finish with one-piece
varnished walnut grip. The bronze, attachable, stock is also nickelplated.
Unlike “Buntline Special” revolvers with 16-inch barrels, this
revolver has a standard frame with sighting groove and standard
front sight blade. The frame has the distinctive extended hammer
screw that serves as a lug for the attachable stock. The revolver has
the oval, ejector rod head and hammer with bordered, knurled spur
and cone-shaped firing pin. The top of the barrel is roll-stamped
with the ‘’Elongated Block Letter’ address: “COLT’S PT. F.A. MFG. Co.
HARTFORD CT. U.S.A.”. The left side of the barrel is etched: “COLT
FRONTIER SIX SHOOTER” in an oval panel. The left side of the frame
is roll-stamped with the Colt three-Date/three-line patent markings.
“44 CAL” is stamped on the left front trigger guard bow. “1” and “J”
Colt inspection marks are stamped on the rear face of the cylinder,
“C”’ and “J” are stamped on the underside of the barrel behind
the ejector housing stud and
a small “S” is stamped in the
hammer well above the firing
pin hole. The assembly number
“809” is stamped on the inside
of the loading gate. The full
serial number is located on the
underside of the frame, trigger
guard and back strap. All of the
visible serial numbers match.
CONDITION: Fine. The revolver
and attachable stock retain 60%
of the original nickel-plated
finish but show considerable
wear. The nickel plating has
flaked in a number of places
and the exposed surfaces are pitted. Most of the finish is missing
on the ejector housing, cylinder and loading gate. The cylinder
and forward edges of the frame have considerable flash pitting.
The markings and serial numbers on the barrel, frame and other
components are all legible. The grip is in fair condition with traces
of the original varnish and numerous minor handling
marks. The stock has scattered flaking and the knurled
knob is heavily rusted. The action is tight and functions
well. Colt Single Action revolvers with carbine length
barrels are the rarest and most sought-after Single Action
revolver variations. The “Buntline Specials” with 10-inch
barrels are even more rare than the 16-inch barreled
revolvers, according to R.L. Wilson in the “The Book of Colt
Firearms” (page 249). This is an extremely rare and welldocumented
revolver that would be a key piece in the most
advanced Colt Single Action collection.
Estimate: 50000 - 75000
Collector’s Fact
Colt "Buntline Specials" with 10-
inch barrels are even rarer than
the 16-inch barreled revolvers,
according to R.L. Wilson in The
Book of Colt Firearms

FRESH to the Market Factory Engraved, Gold Inlaid, & Inscribed Colt Model 1877 Lightning Revolver
188
LOT 188
Extraordinary Documented Factory Engraved and Gold Inlaid/
Plated Colt Model 1877 Lightning Double Action Revolver with
Inscription, Pearl Grips, and Factory Letter - Serial no. 119295, 38 Long
Colt cal., 4 1/2 inch round bbl., blue/gold/casehardened finish, pearl grips. The
factory letter lists this revolver in .38 caliber with 4 1/2 inch barrel, blue finish, gold
plated cylinder, pearl grips, and “Factory Engraved: ‘Rob’t L. Gregory’ inlaid on the
strap.” It was part of a shipment of three guns of this type shipped to J. F. Schmelzer
& Sons Arms Company in Kansas City, Missouri, on August 7, 1900. Robert Lee
Gregory (1862-1915) was born and buried in Kansas City. His father, William
S. Gregory (1825-1887), moved to Kansas City from Kentucky and was
elected as the city’s first mayor in 1853. Kansas City was an important
city in the Old West. By 1900, it was the 22nd largest city in the entire
country. After completing his education at Kemper Military School in
1878, Robert Gregory worked in the cattle business in Texas and then
returned to Kansas City in 1884 and worked at his father’s company,
the Gregory Grocery Company, which he took control of in 1890. He
was also involved in other local businesses, including as vice president
of the Kansas City State Bank, and was involved in politics and held
multiple positions, including vice president of the Kansas City Democrat
Club in 1900 when Kansas City hosted the Democratic National Convention
and commissioner on Kansas City’s Board of Police Commissioners in 1897-
1902. Research into the other two revolvers in the shipment may indicate the
revolvers were related to the Democratic National Convention or Board of Police
Commissioners if they were also inlaid with the names of individuals involved in
those affairs. This would certainly have been an appropriate revolver to present
to a well-connected local businessman and political figure. It has classic factory
scroll engraving with primarily punch dot backgrounds on the barrel, cylinder,
frame, and grip frame along with banners, wavy line, and floral accents and
“ROB’T L. GREGORY” gold inlaid down the
back strap in an engraved panel. The barrel
and grip straps are blued,
the hammer and trigger as
well as the screws are niter
blued, the cylinder was
finished with gold plating
over silver plate backing, and
the grips are smooth motherof-pearl.
The barrel has a round blade front
sight, “COLT’S P.T. F.A. MFG. Co/HARTFORD. CT. U.S.A.”
marked on top, and “COLT. D.A. 38” marked in an
engraved panel on the left. The frame has the patent
markings and the Rampant Colt on the left and the
assembly number “276” on the loading gate. The
matching serial numbers are stamped on the frame,
trigger guard, and butt, and the matching partial
serial number “295” is written inside each grip panel.
CONDITION: Exceptionally fine with 85% bright
original high polish blue finish remaining on the barrel,
60% original blue on the grip straps, 85% original case colors, particularly vibrant
original case colors in the sight groove and ahead of the cylinder, strong original
niter blue on the smaller parts, bright original gold inlay on the back strap, aged
patina on the gold plating on the cylinder of which most remains (with flash
burns from firing visible on forward portion and face), smooth gray and brown
patina on the areas with faded finish, some light spotting, and general minor wear
considering the revolver’s age. Most of the wear is concentrated on the grip frame.
The engraving and markings are crisp. The grips are also very fine and display
highly attractive natural iridescent tones and patterns and minor handling wear.
Mechanically fine. Overall, this is an extremely rare, documented, never offered,
fresh-to-the-market, special order, factory engraved, and gold inlaid/plated Colt
Model 1877 DA Lightning of which writers cannot recall offering another like this
one at auction!
Estimate: 25000 - 50000

190
LOT 189
Documented New Orleans Shipped
Colt Single Action Army Revolver
with Factory Letter and Scarce Long
Fluted Cylinder with Factory Letter - Serial
no. 330853, 45 LC cal., 4 3/4 inch round bbl.,
blue/casehardened finish, hard rubber grips.
The included factory
letter confirms the
current caliber, barrel
length, finish, and
the “Double action
cylinder of long flute
configuration” when
it shipped to Stauffer,
Eshleman & Company
of New Orleans, LA, on April 24, 1914.
The double action long flute cylinders
are rare as Colt only assembled 579
single action revolvers in 1914 (1,478
total from 1913-1915) utilizing surplus
cylinders from the Model 1878 revolvers
per Graham, Kopec, and Moore on page
156 of “A Study of the Colt Single Action
Army Revolver”.
CONDITION: Good overall, showing
traces of blue in the protected areas and
flashes of silvered out case colors on the
frame. There is some scattered pitting throughout with some damage to
the cylinder pin. The grips have worn but well-defined checkering and
some edge wear. Mechanically fine.
Estimate: 2000 - 3000
Collector’s Fact
According to authors Graham,
Kopec and Moore, of the
1,478 produced with long
flute cylinders, only 579 were
manufactured in 1914.
LOT 190
Documented St. Louis Shipped Colt
First Generation Single Action Army
Revolver with Pearl Grips and Factory Letter
- Serial no. 228431, 32 WCF cal., 4 3/4 inch round
bbl., blue/casehardened finish, pearl grips. The
included factory letter confirms the current caliber,
finish, barrel length,
and lists the stocks as
“Not Listed” when it
was shipped to Witte
Hardware Company of
St. Louis, MO, on June
18, 1902.
CONDITION: Very
good, retaining strong
traces of blue in the protected areas and some flashes of case
colors on the frame. Some pitting scattered throughout but concentrated on the cylinder. The
oversized period replacement grips are fine with a few small shallow cracks.
Mechanically excellent.
Estimate: 1600 - 2500
LOT 191
Documented London Agency
Black Powder Colt Flattop Target Single Action Army Revolver
with Factory Letter in Scarce .450 Caliber - Serial no. 133195, 450
Eley cal., 7 1/2 inch round bbl., blue finish, hard rubber grips. One of only
84 Flattop Target Single Action Army revolvers manufactured in .450 Eley. This
example was manufactured in 1890 with the one-line Colt Pall Mall London address
on top of the barrel, “450 ELEY.” on the left of the barrel, British proofs, and otherwise
standard markings and features. The included factory
letter confirms the current configuration (grips not listed)
including the scarce caliber which is listed as “450/c” as
well as shipment to Colt’s London Agency in London on
20 November 1890 in a twelve gun shipment.
CONDITION: Very good, retains 30% original blue finish
with the balance mostly a brown patina and some
scattered patches of mild pitting. The front sight has
been modified and fitted with a taller profile sight. The
grips are also very good with mild wear, some scattered minor handling marks, and having started to turn a slight chocolate color.
Mechanically excellent.
Estimate: 3500 - 5500
LOT 192
Documented St. Louis Shipped Black Powder Colt Single Action
Army Revolver with Factory Letter - Serial no. 86107, 45 LC cal., 7 1/2
inch round bbl., nickel finish, antique ivory grips. The included factory
letter confirms the nickel finish and caliber and shows the barrel length and grips
as “Not Listed” generally meaning 7 1/2 inch and walnut respectively. It was shipped
to E. C. Meacham Arms Co. of St. Louis, MO, on February 5, 1883. There is a factory
refinish “&” marked on the right of the trigger guard.
Patent markings on the frame are factory re-rolled.
CONDITION: Very fine as factory refinished, showing 95%
plus factory reapplied nickel, light handling evidence,
and faint cylinder drag line. The period replacement grips
are fine with some age cracking and green coloration.
Mechanically excellent.
Estimate: 1600 - 2500
LOT 193
Colt First Generation Single Action Army Revolver with Pearl
Grips - Serial no. 298419, 32 WCF cal., 7 1/2 inch round bbl., blue/
casehardened finish, pearl grips. Manufactured in 1907. Standard markings and
features, other than the pearl grips, including the matching serial numbers on the
frame, trigger guard, and butt.
CONDITION: Very good plus, retaining 50% original blue on the barrel and 40% blue on
the cylinder mostly contained to the flutes. The frame is mostly silvered out with flashes of
case colors in the protected areas. Handling/use evidence throughout with scattered areas of light spotting.
The slightly under sized replacement grips have a few nicks but are otherwise fine. Mechanically functions
fine, although action only has three clicks.
Estimate: 1600 - 2500

LOT 194
Massive Wortham Bowie Knife with Stag Handle - This massive Bowie knife is 20 inches long overall with a 14
5/8 inch long clip point blade that is 2 3/4 inches wide at the widest point. The blade is marked “WORTHAM”
on the left ricasso. The guard is a thin simple oval of silver plated brass. The
handle is stag antler with silver plated brass ferrule and pommel, both featuring
floral motifs.
BOTH SIDES PICTURED
CONDITION: Very good, the blade showing a mottled mostly grey patina with
scattered light surface pitting and evidence of mild cleaning/sharpening. The
handle is also very good showing minimal wear overall and silver plated fittings
showing an attractive antique patina overall.
Estimate: 1300 - 1900
LOT 195
Joseph Allen & Sons Marked Non-XLL Bowie Knife with Silver Handle - Joseph Allen & Sons marked Sheffield Non-XLL bowie Knife with silver Handle. Joseph Allen
was listed as a razor smith in Sheffield in 1861 and in 1883 acquired the “NON-XLL” trademark from Unwin & Rodgers. 16 1/4
inches overall with an 11 inch clip point blade re-marked “NON-XLL/JOSEPH ALLEN&SONS/SHEFFIELD” on the
left ricasso. Thick silver guard with silver
handle cast with floral motifs.
BOTH SIDES PICTURED
CONDITION: Very good, the blade showing
mostly a smooth artificial grey patina with
high spots worn more bright, some spotting scattered throughout, and evidence of very
light cleaning/sharpening. The guard and handle are very fine showing an attractive
antique patina overall and minimal handling evidence.
Estimate: 1000 - 1600
LOT 196
Large Texas Style Bowie Knife - This Texas style Bowie knife has faint stamped markings on each side of the ricasso that
are indecipherable. 12 1/2 inches in overall length with a 7 5/8 inch drop point blade. The coffin shaped handle is of carved
hardwood held in place by two rivets and an oval shaped guard with circular finials. There is a sticker on
the handle stating that this is a rare 1840s Texas style Bowie knife of the same type and style as some
used at the Battle of the Alamo.
BOTH SIDES PICTURED
CONDITION: Good, showing mostly a smooth brown patina on the blade with some scattered minor
pitting, some nicks in the edge, and evidence of cleaning/sharpening. The handle is also good with a
crack on one side from the lower rivet to the guard, minor dings and scratches, and mild wear overall.
Estimate: 1000 - 1500
LOT 197
Large Unmarked Spear Point Dagger with Carved Bone Handle - There are no visible markings.
It is 15 1/8 inches overall with a 10 3/8 inch spear point blade. Oval shaped guard with finials,
octagonal iron ferrule and pommel
with a hexagonal spiral carved
bone grip.
BOTH SIDES PICTURED
CONDITION: Fair, the blade showing mostly
a brown patina with mild pitting scattered
throughout, evidence of mild sharpening/cleaning,
and a repaired crack/break 3 1/2 inches from the tip. The brass shows an attractive antique
patina with some scattered light verdigris. The bone grip is fine with scattered minor dings,
scratches, and chipping throughout.
Estimate: 1000 - 1500
191

BOTH SIDES PICTURED
LOT 198
Attractive W. Dan Cullity Signed Master Engraved First Generation Colt Single Action
Army Revolver with Pearl Grips - Serial no. 337758, 38 LC cal., 4 3/4 inch round bbl., nickel
finish, pearl grips. Manufactured in 1919 and subsequently engraved by W. Dan Cullity. The left
grip strap is signed “WDC”, the initials of W. Dan Cullity, former Colt Master Engraver and noted antique firearms specialist.
He now runs Cullity and Son in East Sandwich, MA. The fantastic floral scroll
engraving covers nearly all of the surface. The scrollwork
on the frame has a punch dot background. Floral patterns
appear on the front sight and top strap. Fitted with silver
Rampant Colt medallion pearl grips. The back strap lacks a
serial number. Matching serial numbers are on the frame
and trigger guard.
CONDITION: Very fine as masterfully embellished by noted
Master Engraver W. Dan Cullity. The revolver retains 98% of
the nickel plating with limited scattered dark spotting. The
grips are very fine with minimal handling marks and highly
attractive fiery colors. Mechanically excellent.
Estimate: 4000 - 6000
192
LOT 199
Weldon Bledsoe Signed Master Engraved Colt Single Action Army Revolver with Pearl Grips - Serial no. 340201, 38 WCF
cal., 4 3/4 inch round bbl., nickel/gold finish, pearl grips. Manufactured in 1920 and later embellished by renowned Master Engraver
Weldon Bledsoe. The included letter from Weldon Bledsoe’s apprentice, David Harris, letter confirms the caliber, barrel length, full scroll
engraving done by Weldon Bledsoe, polished nickel with gold trim, pearl grips and signed by Bledsoe near the hammer screw on the right
side. The extensive, near full coverage of a scroll and punch dot engraving is featured on the frame, barrel sides, cylinder and back strap
with the engraving extended to the trigger guard. The revolver retains the original Colt factory barrel and frame markings. As stated the
revolver is nickel plated with gold plated hammer, cylinder, trigger, ejector rod and ejector rod housing and fitted with smooth pearl grips.
The late Bledsoe is well known for is cattle brand engraving and taught David Wade Harris, the third of three well known cattle brand
engravers, the art of engraving.
CONDITION: Very fine as embellished by Master Engraver Weldon Bledsoe. The revolver retains 97% of the nickel finish showing some light
flaking/blistering. The revolver retains 95% thinned gold finish. The grips are excellent with a small missing chip on the left panel and few
mild handling marks overall. The pearl has an attractive color. Mechanically excellent.
Estimate: 3000 - 5000
BOTH SIDES
PICTURED

LOT 200
Engraved and Silver Plated First Generation Colt
Single Action Army Revolver with Attractive Relief
Carved Steer Head Grip and Factory Letter - Serial
no. 304691, 45 LC cal., 7 1/2 inch round bbl., silver finish,
antique ivory grips. Manufactured in 1908 and subsequently custom
embellished. The profuse factory quality engraving consists mostly of
floral scrollwork on a punch dot background along with a floral motif
on the top strap, fan pattern behind the hammer, scallop borders, wavy line
and dot motif on top of the ejector rod housing, and kidney motifs on both
sides of the frame at the hammer screw. The barrel has the one-line Hartford
address on top and “45 COLT” inside a banner on the left side.
The left side
of the frame
has the
two-line patent dates followed by
a Rampant Colt. The right side of the trigger guard has a Colt factory
ampersand rework mark, possibly for the engraving and silver plating.
The revolver is plated in silver and fitted with Rampant Colt medallion
grips featuring a carved steer head on the right panel. Matching serial numbers
are on the frame, trigger guard and back strap. The included factory letter lists
the revolver in .32-20 with 7 1/2 inch barrel, blue finish, and grips not listed when
shipped to Montgomery Ward & Co. in Chicago on 25 May 1908.
CONDITION: Very fine as custom embellished, retaining 99% of the aged darkened replated silver. The
engraving is crisp. The slightly oversize grips are fine with typical age cracking, mellow aged appearance,
some minor handling marks and crisp carving. Action functions, but is slightly out of time.
Estimate: 3000 - 5000
BOTH SIDES
PICTURED
LOT 202
Jeff Flannery Master Engraved and Gold Plated Colt
Single Action Army Revolver with Pearl Grips - Serial
no. SA13244, 45 Colt cal., 7 1/2 inch round bbl., gold finish,
pearl grips. Manufactured 1978 with standard markings and
features along with 50% plus coverage floral scroll and punch dot
background engraving. The engraving is signed with an intertwined
“JF” on the underside of the ejector housing, which could be an early
signature of master engraver Jeff Flannery as the engraving
is certainly expertly executed.
CONDITION: Near new as master embellished by Jeff Flannery with some thinning on
the edges and high spots, a few light scratches, and faint cylinder drag marks. There are
a few hairline cracks
in the otherwise
excellent grips.
Mechanically excellent.
Estimate: 2500 - 3750
LOT 201
Engraved First Generation Colt Single Action Army
Revolver - Serial no. 202730, 32 WCF cal., 5 1/2 inch round
bbl., nickel finish, plastic grips. Manufactured in 1900 and
subsequently custom engraved. The revolver features profuse
broad floral scrollwork on a stippled background. Even the sides of
the hammer are engraved. The barrel address, caliber designation and
frame patent date makings are inside engraved banners. Matching serial
numbers are on the frame, trigger guard and back strap. Factory letter lists
the revolver with a 5 1/2 inch barrel in .32-20 caliber and blue finish when
shipped to Simmons Hardware Co. of St. Louis on December 7, 1900.
LOT 203
Bill Johns Engraved Gold Inlaid Colt Single Action
Army Revolver - Serial no. 66852SA, 357 magnum cal.,
5 1/2 inch round bbl., blue/casehardened finish, plastic
grips. Originally manufactured in 1973 and subsequently masterfully
engraved by Bill Johns, located in Cody, Wyoming, who signed his
work with his signature “BJ” stamp in front of the trigger guard. The
embellishment features flourishes of floral scroll on the barrel, cylinder,
trigger guard, and back strap, and gold inlaid bands at the muzzle, breech, and rear of
the cylinder. There is a cattle brand type heart over “U” gold inlaid on the back strap.
Includes a Murray Leather Co. leather soft case.
CONDITION: Fine as professionally custom
embellished, retaining 99% plus of the reapplied
nickel plating and a few minor handling marks on
the grips. Mechanically excellent.
Estimate: 2250 - 3500
BOTH SIDES
PICTURED
CONDITION: Very fine as
masterfully embellished, retains
97% plus of the refinished blue and
case colors with the left side of muzzle a
smooth grey patina, and a light cylinder
drag line. The grips are also very fine with
some light dings and scratches, a small chip
in the bottom edge (right panel), and crisp
checkering overall. Mechanically excellent.
Estimate: 2250 - 3500
BOTH SIDES
PICTURED
193

194
LOT 204
Excellent Factory Engraved Remington Over/Under
Double Barrel Derringer - Serial no. 4629, 41 RF cal., 3
inch solid rib bbl., nickel finish, rosewood grips. Offered
here is a Remington Type I, late production (aka Model No,
2) derringer manufactured in 1868 and featuring a factory
engraving. A broad scroll engraving appears on both sides
of the top barrel at the breech, on the sides of the frame
and on the back strap. The rib has the two-line Remington
address/Elliot’s patent dates marking. The derringer has an
extractor. The small parts are niter blue, and the barrels
and frame are plated in nickel. The barrels and both grip
panels are numbered to the gun. Designed by William
Elliot, the Remington Over/Under Derringer remained on
the market for nearly 70 years and has become one of the
best know of all the American type derringers.
CONDITION: Excellent, retaining 98% plus original
nickel finish with small patch of pitting on the front grip
strap. 90% bright original niter blue remains on the small
components. The engraving is crisp. The grips are also
excellent with a few minor handling marks. Mechanically
excellent. Provenance: The Collection of Tom Warren Lewis,
Property of a Gentleman
Estimate: 10000 - 17000

BOTH SIDES PICTURED
LOT 205
Factory Engraved Merwin, Hulbert
& Co. Large Frame Single Action
Revolver - Serial no. 2046, 44 cal., 7
inch round bbl., nickel finish, antique ivory grips.
Manufactured from 1876 to the 1880s, these large
frame single action revolvers were also known as the
“Army Revolver”. This early model features an open top
frame, scooped cylinder flutes, sliding loading gate
and square butt with lanyard ring. The front sight is a blade integral to the barrel,
and the rear sight is a “V” notch just ahead of the hammer on the frame. The left side
of the barrel has the one-line Hopkins & Allen address marking, and the top of the
barrel has the one-line Merwin Hulbert address/patent information. The revolver
lacks a caliber marking. Most of the metal surfaces are adorned with factory engraved
floral motifs. The left side of the frame has an engraved eagle, and the right side of
the frame has an engraved crane. The serial number is stamped on the butt, and the
assembly number “125” appears on the grip frame, barrel lug and cylinder.
CONDITION: Very fine. The revolver retains 85% plus original nickel finish with the balance mixed with smooth gray patina and flaking. There is some minor pitting on the back
strap. The grips are also very fine showing typical age cracking and some minor dings and scratches. Mechanically functions fine, but is slightly out of time.
Estimate: 6000 - 9500
BOTH SIDES PICTURED
LOT 206
Factory Panel Scene Engraved Merwin
Hulbert & Co. Pocket Army Single Action
Revolver - Serial no. 4311, 44-40 cal., 3 1/4 inch round
bbl., nickel finish, hard rubber grips. Manufactured circa 1876 into the
1880s, this Merwin, Hulbert & Co. Pocket Army single action revolver features
a round barrel, fluted cylinder and bird’s head butt. The revolver is profusely
engraved with the distinctive Merwin, Hulbert & Co. style with a round panel
on the left side of the frame which features a deer head. The left side of the frame
under the cylinder is marked “CALIBRE/WINCHESTER” followed by “1873” and the
right side of the frame is marked “MERWIN, HULBERT & CO. N.Y./POCKET ARMY”. The left side of
the barrel has the two-line Hopkins & Allen address/patent date marking. The barrel, frame sides,
cylinder flats and top of the back strap feature a fine floral/floral vine and punch dot engraving. The left
rear of the frame has a geometric design. A simple punch dot scroll pattern is engraved on the sliding
loading gate. The serial number is stamped near the butt, the rear face of the cylinder, the back of the
barrel lug and the cylinder pin have the assembly number “3880”. Nickel finish with casehardened hammer,
trigger guard and trigger.
CONDITION: Very fine. The revolver retains 85% plus original nickel finish with some scattered minor
flaking, high edge and back strap wear. The trigger guard has a smooth mottled gray patina with some
strong original case colors in protected areas. The grips are good with some moderate/heavy wear on the
left panel, a few minor dings and crisp checkering on the right panel. The markings and engraving are crisp
and clear. The action is fine.
Estimate: 5500 - 7500
195

A Selection of Fine Arms from the Esteemed Collection of Malcolm King
196
LOT 207
Desirable Remington Dog Head Cane Gun - NSN, 32 RF cal., 27 3/4 inch round bbl., gutta percha finish. This is a
representative example of a Remington metallic cartridge cane gun with the dog head handle. 2,000 Remington cane
guns were manufactured from 1861-1888, including multiple variations of heads, colors, and calibers. The original
design was patented by Remington’s master mechanic John F. Thomas in 1858. The Remington cane guns have the
distinction of being the first metallic cartridge long arm produced by Remington. Remington was also the only major
U.S. manufacturer to produce cane guns. Cane guns and swords were popular with European gentlemen in the 19th
century. Canes were considered an essential part of a gentleman’s wardrobe in the Victorian Era. Due to the increase
in street crime in both European and American cities, the need for a defensive weapon while still wanting to look sharp
helped promote the production of these weapons. Shotgun versions of cane guns were also used for opportunistic hunting while
walking on country estates. Remington advertised “The Remington Rifle Cane” as “Just the Thing for Taxidermists” and as “Protection
against Dogs and Highwaymen.” This example is one of the .32 rimfire versions and has the large dog head handle. The overall length
with muzzle cap is 35 1/4 inches.
CONDITION: Very good with minor scratches and dings and distinct, attractively aged dog head. The gutta percha shaft is of matching
aged color to the aforementioned grip. The tip is a period non- factory brass replacement. These cane guns are highly desirable
collector’s items.
Estimate: 5000 - 7500
LOT 208
Frankenau’s Patent Concealed Double Action Pinfire “Purse”
Revolver - Serial no. 490, 5 mm cal., 3/4 inch round bbl., nickel finish.
These interesting self-defense handguns are discussed “Firearms Curiosa”
by Winant and pictured on page 159. The design for this unusual weapon
was patented in the U.K. on September 5, 1877, and then the U.S. on
November 6, 1877. This revolver appears to be a coin purse at first
glance but contains a folding trigger pinfire revolver within with the
serial number “490” on the recoil shield on the right, “90” on the back
of the cylinder, and a “crown/Z” proof on the left side of the frame at
the rear. The trigger folds down and through the bottom of the purse
so that the revolver can be fired without opening the purse itself. The
top of the case has “FRANKENAU’S PATENT.” There is also a small cover
for the muzzle. It is also numbered “77” by hand inside the metal body
of the purse. The revolver compartment also has an ejector rod and is
perforated on the lid to aid in heat dissipation. The other compartment
can hold money or other items and has a note marked “Souvenier/Mdm.
L. Parmentier/Jnui.”
CONDITION: Very fine. The revolver itself retains 85% plus of its original
nickel finish. The leather/fabric exterior is well-worn but complete, and
the interior lining has some tears. The metal portions of the case have mild
wear such as general light scratches. It is mechanically fine. A rare and very
interesting “covert” revolver and piece of “firearms curiosa.”
Provenance: The Malcolm King Collection.
Estimate: 2500 - 4000
LOT 209
Attractive Cased Le Petit Protector Ring Gun - NSN, 2 mm pinfire cal., 3/8
inch cluster bbl., nitre blue/German silver finish. This is an example of a unique
19th century style French ring gun that was most likely manufactured in the
20th Century (whatever the history, these ring pistols are oddities and appeal
to collectors purely as conversation pieces). The German silver band of the ring
has a light floral type engraving and is marked “LE PETIT PROTECTOR”. This ring
gun features a small hand rotated 6-shot pinfire cartridge cylinder that must
be removed for loading/unloading. The pins of the cartridges are struck by the
base of the hammer. Includes a bird’s eye maple case with blank
escutcheon on the lid.
CONDITION: Very fine, retains 85% original nitre blue finish with the balance
a brown-grey patina. Mechanically excellent. The case is very good with some
scattered light handling/storage marks and some mild wear on the interior.
Estimate: 7500 - 10000

LOT 210
Fabulous L.D. Nimschke Engraved Smith & Wesson New Model
No. 3 Single Action Revolver - Serial no. 29311, 44 S&W Russian cal.,
6 1/2 inch solid rib bbl., blue finish, antique ivory grips. Introduced in
1878. Offered here is a collector’s choice New Model No. 3 revolver
featuring a highly desirable and rare engraving by renowned
Master Engraver L.D. Nimschke. Masterful scrollwork on a punch dot
background covers nearly all of the surfaces. Amongst the scrollwork
are diamond, floral and cross hatching engraved motifs. Engraved
flourishes flank the two-line barrel address/patent dates marking. Fan
patterns are engraved on the recoil shield. Scrollwork surrounds the
S&W logo on the right side of the frame. Simply an awesome, high
condition work of 19th century firearms art! Pictures speak louder
than words! A lanyard ring is mounted on the butt. Matching serial
numbers are on the butt, cylinder, barrel and barrel latch.
CONDITION: Excellent, retaining 97% original blue finish showing
some thinning mostly on the grip straps. The engraving is crisp. 97%
original case colors remain on the hammer and trigger guard. The
grips are also excellent showing minimal handling evidence and
attractive color and grain. Mechanically excellent. This investment
grade work of art by famed Master Engraver L.D. Nimschke is a must
have for the serious S&W collector! Nimschke’s masterpiece would be
hard to improve upon!
Provenance: Dr. Gerald Klaz collection.
Estimate: 17000 - 27500
The Dr. Gerald Klaz Collection
197

Collector’s Fact
Of the 977 Model
320s manufactured,
only 224 were
manufactured with
20 inch barrels.
198
LOT 211
Scarce Smith & Wesson Model
320 Revolving Rifle with
Rare 20 Inch Barrel and Stock
Mounted Peep Sight - Serial
no. 539, 320 cal., 20 inch round bbl., blue finish, walnut stock, hard rubber
grips. Manufactured 1879 to 1887 with a total production of only 977. The Smith
& Wesson 320 revolving rifle is one of the rarest and most sought after of all Smith & Wesson firearms. Serial numbered from
1 to 977. The Model 320 was manufactured using the frame and basic action of the New Model No. 3 revolver with some minor
differences in the hammer, trigger, and cylinder. A slot is cut into the butt and a hole drilled in the back strap to accommodate
the shoulder stock. The Model 320 was made in three barrel lengths of 16, 18, and 20 inches, with 20 being the rarest length. This rifle
features the ultra rare 20 inch barrel of which only 224 were produced. The rifle is chambered for the 320 Smith & Wesson cartridge. The top of the rib is marked with
the two line address/patent dates. German silver front sight with folding notch rear sight on the solid rib. The matching serial number “539” appears on the butt,
cylinder and barrel latch. The barrel is fitted with a checkered red mottled hard rubber forearm with the S&W monogram. The grips are matching with S&W monograms
in a circle at the tops. The stock is smooth walnut with blue finished attaching iron and is equipped with the rare and highly desirable original peep sight mounted on
the tang which is often missing and a checkered black hard rubber buttplate with S&W monogram.
CONDITION: Very fine. The barrel retains 80% original blue finish thinning along high points and at the muzzle. The solid rib shows a series of fine surface scratches just
behind the muzzle. The barrel address is still sharp, crisp and clear. The frame retains 70% original blue finish thinning on exposed areas and along the high edges with some
overall light handling marks. The cylinder retains 40% original finish, strongest in the flutes, with the balance a mottled gray/brown patina. The hammer and trigger guard retain nearly all of their original and vibrant case
colors. The forearm and grips are very good plus. The stock lug is very fine with 40% thinning blue on the upper tang. The lower tang and latch arm retain 90% original blue finish. The wood is very fine with some minor
pressure marks and scuffs. Overall a very desirable Smith & Wesson in an equally rare barrel length.
Estimate: 16000 - 25000

Extremely Rare & Fine .44 Rimfire Smith & Wesson No. 3 American Single Action Revolver
THIS RARE VARIATION LACKS THE
NOTCHED HAMMER
Collector’s Fact
Of the 3,014 2nd
Model Americans
chambered in .44
Henry, only 2,157 lack
a notched hammer.
LOT 212
Exceptional Smith & Wesson No. 3 American 2nd Model Single Action Revolver
in Rare .44 Henry - Serial no. 26035, 44 Henry RF cal., 8 inch solid rib bbl., blue finish,
walnut grips. Manufactured from 1872 to 1874. This is one of approximately 3,014 No. 3
American 2nd Models chambered in the highly prized .44 Henry rimfire cartridge. Of the
3,014 produced, only 2,157 lack a notched hammer like this example. Overall this is a very
rare variation of the No. 3 American in fine condition. It also has the one-line address/patent
dates marking on the barrel rib, standard sights, and provision for a lanyard ring (filler screw) on
the butt. The right grip panel is numbered to the gun. Matching assembly numbers are found on the grip
frame, cylinder, barrel, and barrel latch. Many rimfire chambered Americans went to Mexico through the S&W distributor Wexell &
Degress where they saw hard use. Fine condition examples like this revolver are rarely encountered.
CONDITION: Very fine, retaining 60% plus bright original high polish blue finish with the balance a smooth brown-gray patina.
70% original case colors remain on the hammer and trigger guard. The grips are fine with some high edge wear and minor
handling marks. Mechanically excellent. A No. 3 American chambered in highly prized .44 Henry missing from even the most
advanced collections. A must have for the serious S&W collectors looking to complete their collections!
Estimate: 20000 - 35000
199

Incredibly Rare, FRESH & Important: Serial Number 5 Smith & Wesson 1st, 1st, 1st
The 5th Revolver Manufactured with a Bore-Through Cylinder! One of Only 213 Manufactured
The Dr. Gerald Klaz Collection
SERIAL NUMBER 5
LOT 213
Extremely Rare, Documented, Earliest
Known Smith & Wesson Model No. 1
First Issue First Type Revolver Serial
Number 5 Formerly of the Famed William M. Locke
Collection - Serial no. 5, 22 RF cal., 3 3/16 inch solid
rib bbl., blue/silver finish, rosewood grips. The Smith &
Wesson Model No. 1 First Issue Revolvers were the first
successful American metallic cartridge revolvers. They were
manufactured in 1857-1860, and originally advertised as
Smith & Wesson’s seven shooter, not by any model number.
Soon after its introduction, however, the Model 1 name
was adopted. The Model 1 referenced the S&W Number 1
cartridge that was used in the revolver. Only a little over
200 of the original First Type version were manufactured.
On these early revolvers the recoil plate rotates with the
cylinder and has a small key on the left side of the recoil
shield. They also have a “bayonet” style barrel catch. The
revolver features a low rounded blade front sight, “SMITH
& WESSON. SPRINGFIELD. MASS.” on top of the rib, a notch
rear sight, Rollin White’s April 3, 1855 patent marking (faint)
around the 7-shot cylinder, rounded profile brass frame,
and matching extremely low serial number “5” on the butt,
barrel lug, and both grip panels. This lowest serialized
No. 1 First Issue First Type Revolver known in existence is
pictured and identified as once being
part of the famed William M. Locke
collection in John Parsons’ “Smith &
Wesson Revolvers: The Pioneer Single Action Models”
on page 15 and in Frank Sellers’ “The William M. Locke
Collection” on page 358.
CONDITION: Very good plus. The revolver has a
smooth brown-gray patina with strong traces of
original blue in the protected areas on the barrel.
The brass frame has an attractive honey colored
aged appearance with slight traces of age darkened
original silver plating in the protected areas. The grips
are also very good with a number of minor dings and
scratches. Mechanically needs minor work as cylinder
does not lock properly as it is missing the retention pin.
An incredible rarity, seldom are Model One 1st Issue,
1st Types found for sale, especially single digit serialized
examples! A rarity, previously owned William Locke, that
is quite possibly a once-in-a-lifetime opportunity for a
serious S&W collector!
Provenance: the William M. Locke collection and
the Dr. Gerald Klaz collection.
Estimate: 20000 - 40000
AS PICTURED AND DESCRIBED IN THE
BOOK THE WILLIAM LOCKE COLLECTION BY
SELLERS
THIS IS THE EARLIEST KNOWN SMITH & WESSON
MODEL NO. 1 FIRST ISSUE FIRST TYPE
200
AS PICTURED AND DESCRIBED IN THE
BOOK SMITH & WESSON REVOLVERS:
THE PIONEER SINGLE ACTION
MODELS BY PARSONS

One of Only
Three Known
The Dr. Gerald Klaz Collection
202
LOT 214
Documented Gustave Young Factory Exhibition Engraved and Gold
Inlaid Smith & Wesson No. 3 American 2nd Model Revolver with
Factory Letter - Serial no. 15689, 44 S&W American cal., 8 inch solid
rib bbl., blue finish, antique ivory grips. Rock Island Auction Company
is proud to present this fresh and important find courtesy of the Gerald
Klaz Collection. This is one of only three known Gustave Young Factory
engraved and gold inlaid Smith & Wesson No. 3 Americans, and part
of Smith & Wesson’s traveling world exhibition of the early 1870’s.
As confirmed by the seminal work by John Parsons “Smith & Wesson
Revolvers” on page 130 and accompanying factory letter, this revolver
is listed in correspondence between S&W and MW Robinson in May of
1878 as Robinson was tasked with “closing out at the best price possible”
this group of highly embellished firearms that had been maintained by
the factory. This revolver appears by serial number, 15,689, as “engraved,
gold, ivory and at a price of $70.” Only one other revolver on the list is
more expensive, No. 15,679 (photographed on pg. 67, of Artistry in Arms
The Guns of Smith & Wesson by Jinks) that revolver is also engraved,
inlaid, but with pearl grips at a price of $75. The difference in the price
between to two is the grip material, pearl was a slight premium. This
traveling exhibition included: the Vienna World Fair in 1873, the great
Philadelphia Centennial of 1876 and an unidentified “fair” in San Francisco
in 1877. The revolver features an exquisite exhibition embellishment by
famed Master Engraver Gustave Young. The near full coverage engraving
consists of Young’s masterful floral scrollwork. Even the hammer features
the engraving. Note the near circular tips of many of the scroll patterns,
an attribute strongly associated with Young. The engraving is enhanced
with fine gold inlaid patterns consisting of scrollwork on both sides of the
barrel, scrollwork surrounding a floral blossom on the side plate and right
side of the frame and a large and beautiful gold dog’s head on the back
strap. Additional gold inlay in the form of bands are featured on the barrel
at the muzzle and on the cylinder at the rear. The serial number on the
butt is inside an engraved banner.

The Highest Level of Embellishment
by The Finest 19th Century Firearms
Engraver Gustave Young
The barrel rib has the one-line address/patent dates legend within scallop borders.
The right grip panel is numbered to the gun in pencil. Matching assembly marks are
on the grip frame, cylinder, barrel and barrel latch. A true work of Gustave Young’s
mastery that was displayed at international fairs!
CONDITION: Very good plus, retaining 40% plus original blue finish with the balance
a smooth brown-gray patina. There is some scattered pitting mostly on the barrel.
The engraving is crisp. All of the gold remains. Patterns of original case colors remain
on the hammer and trigger guard. The grips are fine showing typical age cracking
on the bottom and at the screw, some minor handling marks and attractive grain.
Mechanically excellent. This revolver is a testament to Gustave Young’s craftsmanship
and further evidence he was the finest 19th century American firearms engraver. Gold
is the highest level of embellishment possible, it gets no rarer or better.
Provenance: Dr. Gerald Klaz collection.
Estimate: 55000 - 95000
THE VIENNA WOLRD'S FAIR OF 1873
THE MOSCOW
POLYTECHNIC EXHIBITION
OF 1872
THE 1876 CENTENNIAL
EXPOSITION PHILADELPHIA

RARE Well-Documented & FRESH Gustave Young Factory Panel Scene Engraved & Gold Inlaid
Smith & Wesson 1st Model 3rd Issue
The Dr. Gerald Klaz Collection
204
LOT 215
Very Fine Paris Shipped Gustave Young Exhibition Quality Triple Panel Scene
Engraved and Gold Inlaid Smith & Wesson Model No. 1 3rd Issue Revolver with
Pearl Grips and Factory Letter - Serial no. 1851, 22 RF cal., 3 3/16 inch solid rib bbl.,
blue finish, pearl grips. Manufactured from 1868 to 1881 with this example featuring a
fine exhibition quality embellishment by renowned Master Engraver Gustave Young. The
accompanying factory letter lists this revolver with a 3 3/16 inch barrel, blue finish, factory
engraving and gold inlay, and pearl grips when shipped on September 8, 1868 and
delivered to C.W. May, Paris, France. S&W historian Roy Jinks states in the letter that the
revolver was engraved by Gustave Young. Young worked with Smith & Wesson as early as
1865 after serving as Colt’s Master Engraver and was the in-house engraver for Smith &
Wesson starting in 1869 until his death in 1895. The near full coverage engraving consists
of Young’s masterful floral scrollwork along with the panel scenes of a gentleman shooter
taking aim with a revolver on the left side of the frame, a dog head behind the hammer,
and a dog on the right side of the frame. Note the near circular tips of many of the scroll
patterns, an attribute strongly associated with Young. Amongst the scrollwork on the
barrel sides is a grape vine pattern exquisitely inlaid in gold. A similar gold inlaid grape
vine pattern is found on a Young embellished Model 1 1/2 2nd Issue displayed at the
Paris Exhibition of 1867 that became the personal firearm of Horace Smith, co-founder of
Smith & Wesson (see Roy Jinks’ “Artistry in Arms: The Guns of Smith & Wesson,” page 63).
The elaborate, high quality craftsmanship demonstrated on this revolver coupled with it
being shipped to Paris would certainly make it a contender for an international exhibit.
The
borders
consists of
the typical
scalloped
pattern so often
used by Young. The
serial number is inside
a banner on the butt.
Matching assembly marks are
on the grip frame, barrel and cylinder.
The revolver is fitted with pearl grips.
CONDITION: Very fine. 90% original blue finish
remains on the barrel and frame and 50% original blue finish remain on the cylinder with
the balance a smooth gray patina. The engraving is crisp. All of the gold remains. 97%
original case colors remain on the hammer. The grips are excellent with minimal handling
marks and attractive colors. Mechanically excellent. This highly attractive Gustave Young
exhibition quality engraved and inlaid Model No. 1 is a fine example of 19th century S&W
artistry and would make a great addition to any S&W collection.
Provenance: Dr. Gerald Klaz collection.
Estimate: 22500 - 35000

Factory Gold Inlay is the Highest Level of Embellishment, Let Alone a Double Panel Scene from the Hand of
19th Century American Engraving Virtuoso Gustave Young
The Dr. Gerald Klaz Collection
205

BOTH SIDES PICTURED
The Dr. Gerald Klaz Collection
LOT 216
Cased Rare Nickel Plated Smith & Wesson
Model 320 Revolving Rifle - Serial no. 456,
320 cal., 20 inch solid rib bbl., nickel finish,
hard rubber grips. Manufactured from 1879 to 1887, the
Model 320 revolving rifle is one of the rarest Smith &
Wesson firearms produced with a total production of
977. These firearms were serial numbered from 1 to 977,
and out of the 977 manufactured, 224 had the 20 inch
barrel. The Model 320 was manufactured in three barrel
lengths of 16, 18, and 20 inches with 20 being the rarest length. Only approximately 85-90 feature
nickel finish. That is less than 10% of all production! The 20 inch barrel has a blade front sight and two leaf folding
rear sight and is stamped with the two-line address/patent dates marking. Matching serial numbers are on the butt, cylinder, barrel and barrel latch. The forearm and
grips are checkered red mottled hard rubber with S&W monogram. Comes with the correct and proper period case.
CONDITION: Fine, retaining 60% original nickel plating with the balance a mixture of smooth brown and gray patinas along with some cleaned pitting. Traces of original
case colors remain on the hammer and trigger guard. The forearm and grips are very fine with a few scattered minor handling marks and crisp checkering overall.
Mechanically excellent. The well worn and repaired case is poor with added interior straps.
Provenance: Dr. Gerald Klaz collection.
Estimate: 8000 - 11000
BOTH SIDES PICTURED
LOT 217
Smith & Wesson New Model No. 3 Single Action Revolver with Scarce Shoulder
Stock - Serial no. 23401, 44 S&W Russian cal., 6 1/2 inch solid rib bbl., nickel finish, hard rubber
grips. Introduced in 1878, this revolver falls within one of the serial ranges known to include
New Model No. 3s shipped to Takata & Co. of Yokohama for delivery to the Japanese Navy. A few within the 23000 serial
number range are also known to have been purchased by the Australian government. Matching serial numbers are on the butt,
cylinder, barrel and barrel latch. Comes with a period correct and proper scarce shoulder stock numbered to a different gun and
featuring nickel plated attaching hardware and hard rubber S&W buttplate.
CONDITION: Very fine, retaining 80% original nickel finish with the balance a smooth gray patina mixed with a few patches of pitting. 40%
original case colors remain on the hammer and trigger guard. The grips are excellent with some minor handling evidence (mostly towards the bottoms) and crisp checkering. Mechanically
excellent. The stock is very fine with 97% original nickel finish remaining, some paint splattering on right side and minimal handling marks.
Provenance: Dr. Gerald Klaz collection.
Estimate: 4500 - 6500
Collector’s Fact
Of the 977
manufactured, only
224 were produced
with a 20 inch barrel.
206
LOT 218
Desirable and Excellent Smith & Wesson .44 Single Action
Revolver Stock with Factory Box - Offered here is a S&W
walnut stock extension designed for use with S&W .44 frame
Model No. 3 series revolvers. It has nickel plated attaching
hardware and a checkered S&W hard rubber buttplate. Comes
with a correct and proper S&W box.
CONDITION: Excellent, retaining 99% plus original nickel plating
on the attaching iron and very limited handling evidence on the wood. The box is very fine with very minimal wear and
retaining nearly all of the end label. A great addition to your antique S&W collection!
Provenance: Dr. Gerald Klaz collection.
Estimate: 1000 - 1700

BOTH SIDES
PICTURED
LOT 219
Nimschke New York Engraved Smith & Wesson
.44 Double Action First Model Revolver with
Pearl Grips - Serial no. 4316, 44 S&W Russian
cal., 5 inch solid rib bbl., nickel finish, pearl
grips. Model introduced in 1881. The revolver features profuse
near full coverage period Nimschke-New York style floral scroll
engraving on a punch dot background along with zig-zag line
and dot borders. The 1 7/16 inch cylinder has an engraved
wavy line and dot band at the rear. The screws are lightly engraved. A diamond pattern is engraved amongst the scrollwork behind the hammer. The
top strap is fully engraved. The back strap has a blank inscription panel. The barrel rib has the two-line address/patent dates marking. Matching serial
numbers are on the butt, cylinder, barrel and barrel latch. Fitted with plain pearl grips.
CONDITION: Excellent as period New York engraved, retaining 95% plus original nickel finish with some loss on the back strap and front sight, otherwise
some very light flaking. The engraving is crisp. Some traces of original case colors remain on the hammer and trigger. Some faded original blue remains
on the trigger guard. The grips are very fine with a repaired chip near the top (right panel), tiny chip at the bottom (left panel) and fiery colors. There is
slight play with the cylinder, otherwise action functions properly. One of the most deluxe coverage Nimschke style S&W double actions to be found!
Provenance: Dr. Gerald Klaz collection.
Estimate: 8000 - 11000
BOTH SIDES PICTURED
LOT 220
Cased Smith & Wesson Model
No. 3 Russian 1st Model Single Action Revolver with
Rare 6 1/2 Inch Barrel and Factory Letter - Serial
no. 25370, 44 S&W Russian cal., 6 1/2 inch solid rib bbl.,
nickel finish, walnut grips. The accompanying factory
letter lists this revolver with a 5 1/2 inch barrel in .44
S&W Russian, nickel finish and smooth walnut grips when shipped on
May 3, 1873 [sic] and delivered to M.W. Robinson Co. of New York City. The
revolver falls within the commercial Russian range and as confirmed by
the factory letter has a rare 6 1/2 inch barrel, as 8 inch was standard barrel
length. The barrel rib has the one-line address/patent dates legend ending
with “RUSSIAN MODEL.” Matching assembly numbers are on the grip frame,
cylinder, barrel and barrel latch. The right grip panel is numbered to the gun. The repurposed period
case contains a cartridge block holding 52 cartridges and a screwdriver and features a blank inlaid inscription plate on the exterior of the lid.
CONDITION: Very fine, retaining 98% plus factory quality reapplied nickel plating to the frame showing some finished-over fine faint pitting, mostly found
on the side plate and bottom of the frame. The finish on the barrel and cylinder appear to be original. 98% plus vivid case colors remain on the hammer.
Patterns of case colors remain on the silvered out trigger guard. The grips are also very fine showing a few minor handling marks. Mechanically excellent.
The case is very good with numerous minor handling/storage marks, couple minor cracks on lid and relined interior showing minimal high spot wear.
Provenance: Dr. Gerald Klaz collection.
Estimate: 5500 - 7500
The Dr. Gerald Klaz Collection
207

Incredibly Rare & Highly Desirable U.S. Smith & Wesson 1st Model American -
Often a Missing Link in Even the Most Advanced U.S. Military Collections
Collector’s Fact
This revolver is one
of the first 1,000
manufactured for the
U.S. Government.
208
LOT 221
Rare Highly Desirable and Documented U.S. Smith & Wesson Model 3
American 1st Model Single Action Revolver - Serial no. 1523, 44 American
cal., 8 inch solid rib bbl., blue finish, walnut grips. Manufactured from 1870 to 1872, the First
Model American was the first top break, automatic ejecting revolver. This revolver also has
the distinguishment of being one of the 1,000 manufactured for the U.S. Government, with
blue finish. Interesting enough, this model was introduced 3 years before the Colt Single
Action Army revolver and is probably, more than any other model, associated with the historic
American West. The American Revolver was the first cartridge revolver adopted by the U.S.
military and saw usage throughout the Indian Wars as it was reported to have been issued to
the 2nd, 3rd, 4th, 5th, 6th, and 7th Cavalry. This rare and desirable U.S. martial revolver is listed
by its serial number in the STANDARD CATALOG OF SMITH & WESSON by Jim Supica & Richard
Nahas as a Model 3 that was purchased by the U.S. government. Like all government contract
firearms these were subject to military acceptance inspection which was a task assigned to
Orville W. Answorth, one of the rarest and most collected inspectors of Colt Model 1873 Single
Action Cavalry Revolvers and bear his distinctive “A” acceptance proof. The top of the barrel rib
has the one line address and patent dates marking followed by “US” at the breech. The cylinder
has a small letter “P” and small letter “A” on two flutes with the letter “A” repeated on the left
side of the top strap and left side of the frame ahead of the trigger guard and the letter “P”
repeated on the right side of the barrel forward of the hinge. The serial number is stamped
on the butt with matching assembly number “S2” on grip strap under the grip, the rear of the
cylinder, barrel and barrel latch. Blue finish with casehardened hammer and trigger guard and
fitted with smooth walnut grips. The right grip panel is numbered to the gun.
CONDITION: Very good. The revolver retains 20% original
blue finish mostly in the protected areas with the balance
a smooth brown patina. The hammer and trigger guard
retain flashes of original case colors. The grips are fine with a couple minor putty filled repairs
near the bottom, high edge wear and some minor handling marks. Mechanically excellent.
The “U.S.” Americans transcend the “normal” collecting genres and draw interest from U.S.
military collectors, Indian War collectors as well as Smith & Wesson collectors. Given that these
revolvers were issued two years prior to the Colt 1873 Single Action these pistols saw service
all the way through the Indian Wars including the Battle of Little Bighorn. Considering the
time period, the frequent use and extremely harsh conditions this is an excellent and original
example worthy of the most advanced collection.
Estimate: 7500 - 11000

BOTH SIDES PICTURED
LOT 222
New York Engraved Smith
& Wesson No. 3 American
2nd Model Single Action Revolver - Serial no. 23081, 44 S&W
American cal., 8 inch solid rib bbl., silver finish, rosewood grips. Manufactured from 1872
to 1874 with this revolver featuring profuse, period New York scroll engraving on a punch dot background. Single
floral blossoms are engraved on the recoil shields, barrel sides and back strap. A blank inscription panel is engraved
behind the hammer. The barrel rib has the one-line address/patent dates marking with scallop border and flanked with line and dot
flourishes. Matching assembly numbers are on the grip frame, cylinder, barrel and barrel latch.
CONDITION: Very fine as period New York engraved, retaining 90% silver plating mixed with flaking. The engraving is crisp. The hammer and trigger
guard are mostly a smooth dark patina. The grips are also very fine showing limited handling marks. Mechanically excellent.
Provenance: Dr. Gerald Klaz collection.
Estimate: 3750 - 5500
BOTH SIDES
PICTURED
LOT 223
Engraved Silver and
Gold Plated Smith & Wesson No.
3 Russian 3rd Model Single Action
Revolver with Pearl Grips - Serial no. 44112, 44 S&W
Russian cal., 6 1/2 inch solid rib bbl., silver/gold finish, pearl grips. Manufactured from 1874
to 1878, with this example featuring quality near full coverage 20th century scroll engraving on a punch dot
background. Amongst the scrollwork on the frame is a dog’s head on the left side and an eagle’s head on the right
side. A blank inscription shield is engraved behind the hammer, cross hatching on the back strap at the top, and a fan
motif on the front sight. The rib has the one-line address/patent dates marking ending with “RUSSIAN MODEL”. The butt has a lanyard ring stud
and is stamped with the Schuyler Hartley & Graham diamond retailer mark. Matching assembly numbers are on the grip frame, cylinder, barrel and
barrel latch. The hammer, barrel latch, cylinder, and trigger are plated in gold, and the remaining surfaces are plated in silver.
CONDITION: Very fine as later professionally embellished. The revolver retains 99% reapplied silver and 97% reapplied gold with general loss mostly on
the cylinder. The engraving is crisp. The grips are fine with a few stabilized cracks, a couple surface chips and fiery colors. Mechanically excellent.
Provenance: Dr. Gerald Klaz collection.
Estimate: 3000 - 4000
BOTH SIDES PICTURED
The Dr. Gerald Klaz Collection
LOT 224
New York Engraved and Inscribed Smith & Wesson Model 3 American Transition Model Revolver with Pearl
Grips - Serial no. 6467, 44 S&W American cal., 8 inch solid rib bbl., nickel finish, pearl grips. Manufactured from 1870
to 1872 this is a rare transition model distinguished by a shorter 1.423 inch cylinder and a notch in the hammer for the
interlocking barrel catch. The New York style engraving consists of broad floral scrollwork on a punch dot background along with star burst in an
oval and cross hatching patterns. The barrel rib is inscribed “Ygnacio Mejia”. Two non-factory period drilled and tapped holes for a stock (not included) are on the
back strap. Matching assembly marks on the grip frame, cylinder, barrel and barrel latch. Mexican military officer and politician General Ygnacio Mejia (1814-1906)
participated in several civil wars that plagued Mexico in the 19th century, was the Minister of War in President Benito Juarez’s cabinet from 1865 to 1876, and was a
member of the Pan-America congress. During the Second French intervention in Mexico, he was captured at the Siege of Puebla (March 16 to May 17, 1863).
CONDITION: Very good. 20% original nickel plating remains in and around the protected areas with the balance a smooth gray patina mixed with some mild pitting. The engraving is generally crisp. The left
panel has a large absent chip, otherwise
the grips have some minor handling marks.
Mechanically excellent.
Provenance: Dr. Gerald Klaz collection.
Estimate: 2000 - 3000
209

LOT 225
Very Fine Smith & Wesson Model Number 1 2nd Issue Single Action Revolver with Gutta Percha Case -
Serial no. 70084, 22 short cal., 3 1/4 inch solid rib bbl., silver finish, rosewood grips. Manufactured from 1860 to
1868, this Model 1, 2nd Issue revolver features a blade front and notch rear sights, 7 round un-fluted cylinder,
square flared butt, and scarce all silver plated finish with casehardened hammer. The top of the barrel is marked
“SMITH & WESSON SPRINGFIELD, MASS”, the cylinder is marked with the patent dates and the serial number is
marked on the butt. Fitted with varnished rosewood grips, with right panel numbered “67129”. Assembly number
“T” is properly stamped on the rear of the barrel, front cylinder face and right heel under the grip. Complete in
an original Smith & Wesson Gutta Percha case with decorative lid with the image of a Number 1 revolver and
“MANUFACTURED ONLY BY/SMITH & WESSON,/SPRINGFIELD MASSACHUSETTS”. The lining in the lid is a floral
design purple velvet and there is brown velvet in the bottom and a 56 round cartridge block.
CONDITION: Very fine. The barrel and frame retain 85% original silver plating with some scattered minor flaking
and some discoloration as well as traces of silver on the cylinder. The hammer retains most of the original case
colors. The grips are excellent with 95% original varnish remaining, showing some very minor lower edge wear, a
few minor dings, a small absent splinter on the right side at the escutcheon and a few light handling marks. The
markings are clear. The action is fine. The case exterior is excellent and the lining has a hole worn in it from the
hammer and some moderate contact wear.
Estimate: 2250 - 3500
BOTH SIDES PICTURED
BOTH SIDES PICTURED
LOT 226
Rare 2nd Quality Marked Smith & Wesson Model Number 1 Second Issue Revolver - Serial no. 81177, 22 RF cal., 3 3/16 inch solid
rib bbl., blue/silver finish, rosewood grips. Manufactured from 1860 to 1868. This is one of the approximately 4,400 2nd Issue revolvers
that were marked “2D. QUALITY” due to a slight casting flaw during manufacture. This revolver is marked “2D QUALITY” on both sides of
the barrel. The right grip panel is numbered to the gun. Matching assembly marks are on the grip frame, barrel and cylinder.
CONDITION: Fine. Nearly 97% original blue remains on the cylinder and traces of original blue remain on the barrel with the balance
a smooth brown patina. The frame retains 98% plus of the age darkened original silver plating. The grips are fine with a series of tiny
dings on the butt, minor handling marks overall and nearly all of the original varnish remaining. Mechanically excellent.
Estimate: 2250 - 3750
210

BOTH SIDES
PICTURED
BOTH SIDES
PICTURED
LOT 227
L.D. Nimschke Engraved, Silver Plated Smith
& Wesson Model No. 2 Old Army Revolver with
Pearl Grips - Serial no. 36510, 32 RF cal., 6 inch solid rib bbl., silver finish,
pearl grips. The revolver features L.D. Nimschke New York open style scroll
engraving (lacks stippled background) on the sides of the frame, scrollwork
with punch dot background on the barrel and cylinder, cross hatching on the cylinder, star
bust behind the hammer, and entwining line and dot motifs on the barrel at the muzzle, rib
and back strap. The letter “D” is engraved on the bottom barrel flat at the muzzle. Matching
assembly numbers are on the grip frame, barrel and cylinder. The revolver is plated in silver
and fitted with smooth pearl grips.
CONDITION: Very fine with period L.D. Nimschke New York engraving. The barrel, frame and hammer retain 90%
of the silver plating mixed with some flaking and the back strap has a smooth brown-gray patina. The cylinder is
mostly a smooth gray patina with some scattered pitting. The engraving is crisp. The grips are fine with some age
cracking around the screw, a couple small surface chips near the bottom and fiery colors. Mechanically excellent.
Estimate: 3500 - 5000
BOTH SIDES
PICTURED
LOT 229
New York Engraved Smith & Wesson .38
Single Action 2nd Model Revolver with
Desirable 5 Inch Barrel and Monogrammed Pearl
Grips - Serial no. 31071, 38 S&W cal., 5 inch solid rib bbl.,
nickel/gold finish, pearl grips. Manufactured from 1877 to 1891. The revolver
features a New York broad floral scroll engraving on a punch dot background
along with zig zag line motifs. The two-tone finish consists of nickel plated barrel
and frame and gold plated cylinder. The right grip panel features a “HL” initials monogram.
Matching serial numbers are on the butt, cylinder, barrel and barrel latch.
CONDITION: Very good as period New York embellished. The barrel and frame retain 80% of the
nickel plating. The cylinder retains traces of gold in the sheltered areas, otherwise having a bright
appearance. Mechanically excellent.
Provenance: Dr. Gerald Klaz collection.
Estimate: 1000 - 1500
BOTH SIDES
PICTURED
The Roger Muckerheide Collection
LOT 228
New York Engraved Smith & Wesson Model 1 1/2
1st Issue Revolver - Serial no. 12702, 32 RF cal., 3 1/2
inch solid rib bbl., blue finish, rosewood grips. Manufactured from 1865 to
1868. The revolver features New York style scrollwork engraving on a punch
dot background on the frame, cylinder, sides of the barrel at the muzzle
and breech and behind the hammer. Matching assembly marks are on grip frame, barrel and
cylinder. The right grip panel is numbered to the gun.
CONDITION: Fine, retaining 70% thinning original blue finish with smooth gray patina on the
grip straps. Patterns of original case colors remain on the hammer. The engraving is crisp. The grips are also fine
with minor dings and scratches and retaining most of the original finish. Mechanically needs work as the cylinder
does not rotate when action is cycled.
Estimate: 1800 - 2500
LOT 230
New York Engraved Smith & Wesson Model 1 1/2
1st Issue Revolver - Serial no. 11253, 32 RF cal., 3 1/2
inch solid rib bbl., blue finish, antique ivory grips. Manufactured from 1865
to 1868. Period New York style broad floral scroll engraving along with floral
blossoms and entwining line patterns. Matching assembly marks on the grip
frame, cylinder and barrel. The last three digits of the serial number are marked on the back of
the checkered grips.
CONDITION: Very good as period New York engraved, retaining 20% original blue finish in and
around the protected areas with the balance a smooth dark brown patina. Patterns of original
case colors remain on the hammer. The grips are very fine with limited hairline age cracking on the bottom and
crisp checkering overall. Mechanically excellent.
Estimate: 1000 - 1500
211

The Dr. Gerald Klaz Collection
212
LOT 231
Rare Gutta Percha Cased
New York Engraved Smith
& Wesson Model Number
One 1st Issue 2nd Type
Revolver with Distinctive
Bayonet Latch - Serial
no. 467, 22 RF cal., 3 3/16
inch solid rib bbl., blue/
silver finish, rosewood
grips. Offered here is a S&W
Model Number One 1st
Issue 2nd Type revolver
which features the rare
“bayonet” or flat spring
barrel latch found only on
first approximately 1,130
Model Number One 1st
Issue revolvers (1st and
2nd Type). The revolver
also has the revolving recoil
BOTH SIDES PICTURED
plate attached to the frame. The profuse period New York engraving consists mostly of floral
scrollwork on a punch dot background. The sides of the barrel also have engraved cross
hatching. The barrel rib has the one-line address, the cylinder has the 1855 patent marking, and matching serial numbers are on the butt,
both grip panels, barrel and cylinder. Accompanying this rare revolver is an equally rare S&W gutta percha case with decorative relief lid
showing an image of a No. 1 revolver and “MANUFACTURED ONLY BY/SMITH & WESSON,/SPRINGFIELD MASSACHUSETTS”. The inside of the
lid has decorative red wine velvet and the case contains a cartridge block holding 44 rounds.
CONDITION: The barrel retains traces of original blue finish in the protected areas, otherwise a smooth gray patina with some pitting. The
cylinder has a smooth brown-gray patina. The frame retains areas of original silver plating. The engraving is crisp. The grips are fine with
minor handling marks. Mechanically needs work as the hammer does not hold at full cock. The case is fine with a few hairline stress cracks,
some scattered chipping and typical high spot wear on the lining. The relief patterns are crisp. An incredibly rare tip-up in an equally rare
case no serious S&W collector should be without.
Provenance: Dr. Gerald Klaz collection.
Estimate: 6000 - 8000
LOT 232
Smith & Wesson Model
Number One 1st Issue
6th Type Revolver with
Gutta Percha Case - Serial
no. 11576, 22 RF cal., 3 3/16
inch solid rib bbl., blue/
silver finish, antique ivory
grips. The Model Number
One 1st Issue revolver was
manufactured by Smith
& Wesson from 1857 to
1860 in six various types.
This particular revolver
is a 6th type, the final
change that eliminated the
rotating plate and a ratchet
was made a part of the
cylinder. Standard markings,
both grip panels numbered to
BOTH SIDES PICTURED
gun, and matching assembly marks on the grip frame, cylinder and barrel. Comes with a
rare and very desirable S&W Model Number One revolver gutta percha case. The exterior has the likeness of a Model Number One First
Issue, several smaller renditions of the same as borders, scroll designs, and “MANUFACTURED ONLY BY/SMITH & WESSON,/SPRINGFIELD
MASSACHUSETTS.” The interior has fancy scroll patterns on the lid lining and a cartridge block holding 51 rounds.
CONDITION: Fine. The barrel and cylinder retain 70% original blue finish thinning to a brown and showing evidence of being cleaned on
the barrel. The frame retains 98% original silver plating. The grips are very fine showing slight age shrinkage and attractive color and grain.
Mechanically needs work as cylinder does not lock, otherwise the action functions. The case is fine showing some edge chipping, a few
hairline stress cracks at the hinges, and minimal high spot wear on the lining.
Provenance: Dr. Gerald Klaz collection.
Estimate: 3500 - 5000

LOT 233
Rare Australian Contract Smith & Wesson New Model No. 3
Single Action Revolver with Holster, S&W Shoulder Stock and
Scabbard - Serial no. 12830, 44 S&W Russian cal., 7 inch solid rib
bbl., nickel finish, hard rubber grips. Only approximately 310 Smith
& Wesson New Model 3 Australian revolvers were manufactured, all
with nickel finish, 7 inch barrels, and detachable shoulder stocks.
They were shipped to Australia for the Southern Australian Colonial
Police and carried in holster and scabbard on horseback in the wild
Australian outback. It has the two-line barrel rib marking ending with
the reissue patent date, an Australian broad arrow stamped on the
butt, and matching serial numbers on the butt, cylinder, barrel and
barrel latch. The stock is numbered to a different gun (“12835,” only
five numbers away from this revolver), has an Australian broad arrow,
nickel plated hardware and S&W hard rubber buttplate. The leather
flap holster is marked with an Australian broad arrow proof along
with an illegible rack number on the inside of the flap. The leather stock
scabbard is stamped with an Australian broad arrow and the rack number
“71” on the inside.
CONDITION: Very fine, retaining 90% original nickel finish with the balance
a smooth gray patina. 90% original case colors remain on the hammer, and patterns of original case colors remain on the trigger guard. There
are a few scattered patches of pitting. The grips are very good with the left panel cracked on the bottom, some minor handling marks, and some
worn checkering. Mechanically excellent. The stock is very good with the attaching hardware retaining 60% original nickel finish, a surface chip
and minor handling marks on the walnut, and a chip on the buttplate at the toe. The leather accessories are good with minor handling marks and
flex wear, a removed strap and hole on the back of the holster and a couple slits on the front of the scabbard. An exceptionally good original and
unmolested Australian New Model 3!
Provenance: Dr. Gerald Klaz collection.
Estimate: 4000 - 6000
LOT 234
Scarce
and Very Desirable Documented
U.S. Ainsworth Inspected Smith &
Wesson “Oil Hole” Model 3 American
1st Model Revolver - Serial no. 1341, 44
S&W American cal., 8 inch solid rib bbl.,
blue finish, walnut grips. This revolver is
listed by its serial number in the “Standard
Catalog of Smith & Wesson” by Jim Supica
& Richard Nahas as a Model 3 that was
purchased by the U.S. government (page
92). Compounding the significance of
LISTED BY SERIAL
this revolver is the rarely observed oil
NUMBER RANGE
hole (located on the rear of the extractor housing
IN THE STANDARD
on the bottom of the barrel lug) as found on the first 1,500 or so CATALOG OF SMITH
of this model. The barrel rib has the one-line S&W address/patent
& WESSON BY
dates marking followed by “US.” The frame has a U.S. sub-inspector
mark “A” on the left side, and the barrel and frame have a “P” proof on SUPICA & NAHAS
the right side. An “OWA” cartouche is present on the left grip panel.
Matching assembly marks are on the grip frame, cylinder, barrel and
barrel latch. The S&W American Model was the first cartridge revolver
adopted by the U.S. military and saw usage throughout the Indian Wars
as it was reported to have been issued to the 2nd, 3rd, 4th, 5th, 6th, and
7th Cavalries. Surviving examples of U.S. martial Model 3 Americans are
scarce and highly desirable in any condition.
CONDITION: Very good with some generous amounts of original blue finish
remaining in the protected areas, otherwise a smooth brown patina. There is
some pitting at the muzzle. Some silvered out original
case colors remain on the hammer and trigger guard. The
grips are also very good with a series of minor dings on
the bottom and a filled repair at the clear recut cartouche,
otherwise some minor handling marks and high
edge wear.
Provenance: Dr. Gerald Klaz collection.
Estimate: 3000 - 5000
LOT 235
Rare State of Maryland Smith &
Wesson New Model No. 3 Single
Action Revolver - Serial no. 7139, 44 S&W Russian cal., 6 1/2 inch solid
rib bbl., nickel finish, walnut grips. Offered here is one of only 280 New Model
No. 3s procured for the State of Maryland Militia, which fall in the 7126 to 7405
serial number range, the only U.S. martial issue of the New Model 3. The revolver
is correctly stamped with “US” on the butt and Henry Nettleton’s “HN” Ordnance
inspection mark on the rear cylinder face, frame under the cylinder, and
barrel. The barrel rib has the two-line address/patent dates marking.
The right grip panel is numbered to a different gun. Matching serial
numbers are on the butt, cylinder, barrel and barrel latch.
CONDITION: Fine, retaining 60% original nickel finish with the balance
a smooth dark brown patina. Traces of silvered out case colors remain
on the hammer and trigger guard. The replacement grips are very good
with three notches near the bottom (left panel) and minor dings and
scratches. The ejector system needs work, otherwise the action is fine. A
very rare, Nettleton inspected U.S. military revolver worthy of addition
to any martial handgun collection!
Provenance: Dr. Gerald Klaz collection.
Estimate: 2750 - 4000
Collector’s Fact
Only 280 New Model
No. 3s were procured
for the Maryland
Militia.
LOT 236
Russian Military Tula Arsenal No.
3 Russian 3rd Model Single Action Revolver
- Serial no. 21954, 44 S&W Russian cal., 6 1/2 inch solid rib bbl.,
blue finish, walnut grips. Production of these revolvers started around 1886
after the tooling was purchased from Ludwig Loewe. Although approximately
35,000 were manufactured, these revolvers are very rare in the U.S. and are reportedly just
as rare in Russia. It has the Tula Arsenal Cyrillic marking on the barrel rib which includes the
manufacture date “1890,” the serial number, and a double headed Russian eagle. The cylinder
is also numbered to the gun. The grip frame has a S&W March 1963 factory return date (“363”) and a
S&W factory diamond refinish mark. For more information see www.russianrevolvers.com.
CONDITION: Very fine, retaining 99% plus S&W reapplied blue finish with some pitting under the
finish. Nearly all of the case colors remain on the hammer and trigger guard. The revarnished grips
are very good with minor handling marks. Mechanically excellent.
Provenance: Dr. Gerald Klaz collection.
Estimate: 2250 - 3500
The Dr. Gerald Klaz Collection
213

The Dr. Gerald Klaz Collection
214
LOT 237
Collector’s Lot of Two Engraved
Smith & Wesson .38 Safety
Hammerless Double Action Revolvers with Pearl Grips
-A) Smith & Wesson .38 Safety Hammerless 2nd Model Revolver
- Serial no. 32303, 38 S&W cal., 5 inch solid rib bbl., nickel finish, pearl
grips. Manufactured from 1887 to 1890. The factory engraving consists of
floral scrollwork on a punch dot background covering about 90% of the
surface. Fitted with plain pearl grips. Matching serial numbers on the butt,
cylinder and barrel.
CONDITION: Excellent, retaining 95% original nickel
finish with the balance a smooth gray patina. The
engraving is crisp. 70% original blue finish remains
on the trigger guard, 40% original case colors remain on the
trigger. The grips are fine with a surface chip at the top (right panel)
and a few minor handling marks. Mechanically excellent. B) Smith &
Wesson .38 Safety Hammerless 3rd Model Revolver - Serial no. 81350, 38
S&W cal., 3 1/4 inch solid rib bbl., nickel finish, pearl grips. Manufactured from
1890 to 1898. The floral scroll engraving on a stippled background covers about
50% of the surface. Fitted with S&W medallion 20th century pearl grips. Matching
serial numbers on the butt, cylinder, and barrel.
CONDITION: Very fine as period embellished, retaining 97% of the nickel plating with some loss at the
muzzle, some scattered light flaking and a couple small patches of light pitting. The engraving is crisp. 85% blue
finish remains on the trigger guard, and 95% case colors remain on the trigger. The slightly ill-fitting grips are fine
with a few minor handling marks. Mechanically excellent.
Estimate: 2000 - 3000
LOT 238
Collector’s Lot of Two Smith & Wesson
Safety Hammerless Double Action
Revolvers with Boxes -A) Smith &
Wesson .32 Safety Hammerless 1st
Model Revolver - Serial no. 80789, 32
S&W cal., 3 1/2 inch solid rib bbl., nickel
finish, hard rubber grips. Manufactured
from 1888 to 1902. Matching serial numbers on the butt,
right grip panel, cylinder and barrel. Comes with a correct
and proper original box closely numbered but to a different
revolver and bore brush.
CONDITION: Excellent, retaining 98% plus original nickel
finish with scattered minor handling marks. The grips are also
excellent with crisp checkering. Mechanically
excellent. The box is very fine with minimal
wear and retaining most of the end
label. B) Smith & Wesson .38 Safety
Hammerless 4th Model Revolver
with Pearl Grips - Serial no. 134519, 38
S&W cal., 3 1/4 inch solid rib bbl., blue
finish, pearl grips. Manufactured from
1898 to 1907. Pearl grips with silver S&W
medallions and matching serial numbers
on the butt, cylinder, barrel and barrel
latch. Comes with a correct and proper
original box numbered to a
different revolver.
CONDITION: Excellent, retaining 98% original bright blue finish
showing some minor patina flaking. The grips are fine with a chip
towards the bottom on the left panel. Mechanically excellent. The
box is very fine showing minimal wear.
Provenance: Dr. Gerald Klaz collection.
Estimate: 1100 - 1700
LOT 239
Two Smith & Wesson .32 Safety Hammerless
Double Action Revolvers with Boxes
-A) Smith & Wesson .32 Safety Hammerless
1st Model Revolver - Serial no. 11146, 32 S&W
cal., 3 inch solid rib bbl., nickel finish, hard rubber
grips. Manufactured 1888-1902. British proofs
are present on the barrel, frame, and cylinder.
Matching serial number on the cylinder and butt.
Includes a correct model factory box numbered
to another gun.
CONDITION: Very fine, retaining 95% plus original nickel,
some areas of light frosting, light handling evidence, and
well-defined grip checkering. The box is very good with minor
wear. Mechanically excellent. B) Smith & Wesson .32 Safety
Hammerless 2nd Model “Bicycle Gun” Revolver - Serial
no. 118135, 32 S&W cal., 2 inch solid rib bbl., nickel finish,
hard rubber grips. Manufactured 1902-1909. Matching serial
number on the barrel, barrel latch, cylinder, and butt.
Includes original factory box.
CONDITION: Very fine, retaining 95% plus original
nickel, some light surface scratches throughout, and
scattered light spotting. The box is fair with interior
deterioration. Mechanically excellent.
Provenance: Dr. Gerald Klaz collection.
Estimate: 1600 - 2500
LOT 240
Collector’s Lot of Two Smith & Wesson Safety
Hammerless Double Action Revolvers with Boxes
-A) Smith & Wesson .32 Safety Hammerless 2nd Model
Revolver - Serial no. 153659, 32 S&W cal., 3 1/2 inch solid rib
bbl., nickel finish, hard rubber grips. Manufactured from 1902
to 1909. Matching serial numbers on the butt, right grip panel,
cylinder, barrel latch, and barrel. Comes with the original box numbered
to the gun.
CONDITION: Excellent, retaining 97% plus
original nickel finish with limited flaking.
The grips are also excellent with crisp
checkering. Mechanically excellent. The
box is fine with some wear and retaining
most of the end label. B) Smith &
Wesson .38 Safety Hammerless 3rd
Model Revolver - Serial no. 111644, 38
S&W cal., 3 1/4 inch solid rib bbl., blue
finish, hard rubber grips. Manufactured
from 1890 to 1898. Matching serial
numbers on the butt, right grip panel,
cylinder, and barrel. Comes with a correct
and proper original box numbered to a
different revolver and bore brush.
CONDITION: Excellent, retaining 97%
original blue finish with a couple patches
of oxidation. The grips are also excellent
with minimal handling evidence and
crisp checkering. Mechanically excellent.
The box is fine with some wear and
retaining most of the end label.
Provenance: Dr. Gerald Klaz collection.
Estimate: 1100 - 1700

BOTH SIDES
PICTURED
LOT 241
Rare Cased
2nd Quality Marked Smith &
Wesson Model No. 1 2nd Issue
Revolver - Serial no. 102174, 22
RF cal., 3 3/16 inch solid rib bbl.,
blue/silver finish, rosewood grips.
Manufactured from 1860 to 1868,
this Model 1 2nd Issue revolver
has the rare “2D. QUALTY” marking
on both sides of the barrel.
This marking indicated there
were slight casting flaws when
the revolver was manufactured.
The manufacturing flaws did not affect the mechanical function and they were sold at a discount. Approximately 4,402 of
these types of revolvers feature the “2D. QUALTY” marking. The rib has the one-line address marking, and the cylinder has
the patent dates marking. The right grip panel is numbered to the gun, and there are matching assembly marks on the grip
frame, cylinder and barrel. The period walnut case features a contrasting lock escutcheon and contains a cartridge block
holding 10 cartridges and a brass cleaning rod, typical of the M. W. Robinson distributorship. The name “Chas. Tillapanga” is
twice stamped in ink on the inside of the case (see photo).
CONDITION: Very fine. The barrel retains 95% plus original blue finish and traces of original blue remain on the cylinder with
the overall balance a smooth brown patina. Nearly 97% age darkened original silver remains on the frame. The grips are
excellent with some handling evidence and retaining nearly all of the original finish. Mechanically excellent. The case is fine
with minor-moderate handling/storage marks and typical high spot wear on the lining.
Provenance: Dr. Gerald Klaz collection.
Estimate: 3000 - 4500
LOT 242
Civil War Era
Smith & Wesson
Half Plate Model
No. 2 “Old Army”
Revolver with
Case - Serial no.
11360, 32 RF cal., 6
inch solid rib bbl.,
blue/silver finish,
antique ivory grips.
Manufactured prior
to 1865. The right grip panel is numbered to the gun in pencil. Matching assembly marks are on the grip frame, cylinder and
barrel. Rare “half-plate” finish with silver frame and blue barrel and cylinder. Comes with a period partitioned case and oiler.
CONDITION: Fine. 20% original blue finish remains on the barrel and cylinder with the balance a smooth brown patina.
98% plus original silver plating remains on the frame. Some original case colors remain on the hammer. The grips are also
fine showing some typical hairline stress cracks, some minor handling marks and attractive grain and color. Mechanically
excellent. The case is fine with minor handling/storage marks and typical high spot wear on the faded lining.
Provenance: Dr. Gerald Klaz collection.
Estimate: 2250 - 3500
LOT 243
British Proofed
Copy of a Smith
& Wesson Model
Number 1 Second Issue Revolver
- Serial no. 306, 22 RF cal., 3 3/16 inch solid bbl.,
blue finish, walnut grips. Although there are no
maker markings, Birmingham proofs are stamped on
the upper left barrel flat and on the cylinder on each of the seven
chambers at the rear. The cylinder locking bar is housed in the
top strap, as found on the S&W Model No. 1. Simple double line border engraving
is featured on the barrel, frame, back strap and butt. The barrel and cylinder are
numbered to the gun. The grips are finley checkered, including the butt.
CONDITION: Fine, retaining 70% original polished blue finish with the balance a smooth browgray
patina. The grips are also fine with a tiny chip near the butt (right panel) and crisp checkering
overall. Mechanically needs work as the cylinder does not lock properly one of seven times when the
hammer is cocked.
Estimate: 1200 - 1800
LOT 244
Rare “Stand of Flags”
Gutta Percha Case for a
Smith & Wesson Model
Number One 1st Issue
Revolver - Offered here
is a rarely encountered
S&W “Stand of Flags” gutta
percha case. The case
features an empty 56 count
cartridge block and red
wine velvet lid lining. Only
5,000 gutta percha cases are
said to have been made
for Smith & Wesson. Most
of these were made by
Littlefield, Parsons & Co,
who also made similar
cases for daguerreotypes.
These “special” cases were
popular during the second
half of the 19th Century
and were usually used
for fancy or presentation
guns. They were special
ordered or added by the
distributor after shipment
from the factory. These
were generally found with
the Model 1, 1st and 2nd
Issue revolvers. The “Stand
of Flags” is one of two
types of gutta percha cases
commonly recognized; the
other showcases a relief
image of a Model One on
the lid. Out of these two
case styles, the “Stand of
Flags” is the rarest.
CONDITION: Very good with a couple hairline cracks on the bottom, some edge chipping including
on the cartridge block, a couple sizable chips on the exterior, typical high spot wear on the lining,
and crisp relief markings. The delicate nature of these cases meant that many did not survive. The
“Standing of Flags” case is an accessory often missing from even the most advanced S&W collections.
Provenance: Dr. Gerald Klaz collection.
Estimate: 1400 - 2000
The Dr. Gerald Klaz Collection
215

216
LOT 245
Attractive Cased Smith & Wesson Model 1 1/2 1st Issue Revolver - Serial no. 8221, 32 RF cal., 3 1/2 inch solid
rib bbl., blue finish, rosewood grips. Manufactured from 1865 to 1868. This above average condition S&W Model
1 1/2 1st Issue Revolver features a right grip panel numbered to the gun and matching assembly numbers on the
grip frame, barrel and cylinder. The period mahogany case contains a cartridge block holding a full count of
23 rounds.
CONDITION: Excellent, retaining 90% bright original high polish blue finish with speckling on the balance. 95%
original case colors remain on the hammer and trigger. The grips are also excellent with some minor handling
marks, limited high edge wear and nearly all of the original varnish remaining. The action needs work as hammer
does not hold at the half and full cock positions and cylinder does not lock. The case is fine with minor handling/
storage marks and typical high spot wear on the lining. An attractive Model 1 1/2 for your growing
S&W collection.
Estimate: 2500 - 3750
LOT 246
Very Scarce 2nd Quality Marked Smith & Wesson
Model No. 1 2nd Issue Revolver - Serial no. 87620,
22 RF cal., 3 3/16 inch solid rib bbl., blue/silver finish,
rosewood grips. Manufactured from 1860 to 1868, this Model 1 2nd Issue
revolver has the rare “2D. QUALITY” marking on both sides of the barrel.
This marking indicated there were slight casting flaws when the revolver
was manufactured. The manufacturing flaws did not affect the mechanical function and
they were sold at a discount. Approximately 4,402 of these types of revolvers feature the “2D
QUALITY” marking. The barrel and cylinder have matching assembly marks which differ from
the marking on the grip frame, a not uncommon feature on 2nd quality No. 1s. The right grip
panel is numbered to the gun.
CONDITION: Fine. The barrel retains 40%
original blue finish and traces of blue
remain on the cylinder with the balance a
smooth brown patina. The frame retains
97% age darkened original silver plating.
The grips are very good with a surface
chip near the bottom (left panel), some
minor handling marks and retaining half
of the original varnish. Mechanically fine.
A desirable 2nd quality marked No. 1
that will be a welcomed addition to your
growing S&W collection.
Estimate: 2500 - 3750
LOT 247
Scarce Cased Factory Engraved Smith & Wesson Model Number
One 2nd Issue Revolver with Factory Letter - Serial no. 92070,
22 RF Short cal., 3 3/16 inch solid rib bbl., blue/silver finish, antique
ivory grips. Manufactured c. 1866 with the standard one line address
on the barrel rib and patent dates on the cylinder. “*7” is marked on
the barrel, front cylinder face, and grip frame under the grip, and the
serial number is on the butt. The included factory letter confirms the
current configuration including the engraving and grips, as well as
shipment on 15 March 1866 to E. H. Buckland & Co. of Springfield,
Massachusetts. Also includes an early type Smith & Wesson gutta
percha case featuring the relief image of a Model Number One on
the lid with purple velvet inside the lid containing a cleaning rod and
15 cartridges.
CONDITION: Good, showing mostly a mottled grey-brown patina
and an attractive antique patina on the brass with faint traces of the
original blue and silver, the surfaces “cleaned and polished” long
ago, and crisp engraving. The grip is fine with a few light dings and
scratches and a few hairline age cracks, mostly around the screw
holes. Mechanically excellent. The case is fine with some scattered
minor handling/storage marks and some moderate wear to
the lining.
Estimate: 1800 - 2750
LOT 248
Smith &
Wesson First
Model Second Issue Revolver
- Serial no. 20377, 22 S cal., 3-3/16 inch octagon/solid
rib bbl., blue/silver finish, rosewood grips. Similar in
appearance to the First Issue, the Second issue, manufactured between
1860 and 1868, has irregular shaped, flat side plates, not rounded, one
line address on top of the solid rib and the three patent dates marked
on the unfluted cylinder. Rounded brass front sight and a notched rear sight, casehardened
hammer and spur trigger and smooth grips on a square butt.
CONDITION: Very fine, with 50% of the original blue remains overall with light spotting
beginning on the left side of the barrel and cylinder. 95% of the untouched original silver
plating remains on the frame. There is half of the original casehardened colors remaining on the hammer, with
the remaining area and the trigger now a smooth silver patina. The grips are excellent with scattered very minor
dings and dents. The action is fine.
Estimate: 1100 - 1600

BOTH SIDES PICTURED
LOT 249
Fine Belgian LeMat Pinfire “Grapeshot” Revolver
- Serial no. 3103, 44/20 cal., 6 1/2 inch octagon and
5 3/4 inch round bbl., blue/casehardened finish,
checkered walnut grips. The LeMat is one of the most
famous 19th century revolvers thanks to its central smoothbore
barrel and its Confederate affiliation, including use by P. G. T.
Beauregard, Braxton Bragg (owned sn. 1273), J. E. B. Stuart, and
other Confederate generals and officers but only a few thousand
are believed to have been made making all variations rare and desirable
collectibles. They were designed by Jean Alexandre LeMat of New Orleans in 1856 but mainly
manufactured in Liege, Belgium, and Paris, France. Period advertisements for the revolvers refer to
them as “LeMat’s Grape Shot Revolvers.” There are several variations in the designs, including the
use of different ammunition. This revolver has a nine-shot pinfire cylinder and a muzzle loading
percussion shot barrel. These pinfire versions were mainly sold in Europe and were manufactured
in lower numbers than the percussion revolvers of the Civil War. The upper barrel has a “crown/EL”
marking on the left at the breech, and the
right side has “COL LA LEMATS BTE.” The
right side of the frame is marked “3103,” and
the left side across the barrel lug and front of the frame is marked “174066.” The
rear of the barrel lug has “FP.” The cylinder has an oval Liege proof, and the shot
barrel has a “crown/reverse P” marking. The barrel has a dovetailed front sight,
and the hammer has a groove for the rear sight and a vertical selector switch. The
barrels and cylinder are blued, and the frame is casehardened. The grips are finely
checkered, and the butt has a lanyard loop.
CONDITION: Fine with 25% original case colors on the frame, 50% original blue on
the cylinder, gray and brown patina on the balance, moderate oxidation, buff marks, and
moderate overall wear. The grips are fine and have distinct checkering, light scratches and marks,
and minor handling wear. Mechanically fine. LeMat revolvers are very rare. Relatively few of the
pinfire revolvers have made their way to the U.S., and they were made in smaller numbers than the
percussion revolvers that made LeMat a household name.
Estimate: 8000 - 14000
BOTH SIDES PICTURED
LOT 250
Fine Exhibition Quality Engraved and Gold Inlaid Double Action Target
Revolver from Anton Mulacz of Vienna - NSN, 9 mm cal., 7 1/8 inch part round bbl., blue/gold/
casehardened finish, walnut grips. Anton Mulacz was active in Vienna c. 1860s-1890s and his
company continued on into the 20th century. This revolver was manufactured around the 1870s
and is decorated with gold scrolls and elaborate floral engraving. It features adjustable target sights,
ribbed central section on the barrel, “ANT/MULACZ/IN/WIEN” in gold among the gold scroll patterns
at the breech, recessed chambers, a hammer stall safety on the right side of the frame, and fluted and
checkered grips with nice figure.
CONDITION: Fine with essentially all of the original gold remaining, 60% original blue finish on the barrel
and cylinder turning a dark plum tone, dark original case colors blended with dark patina, repaired
hammer, and crisp engraving. The grips are also very fine and have crisp carving and minor wear.
Mechanically fine.
Estimate: 3000 - 5000
217

218
LOT 251
Very Fine Cased Pair of Calvert Flintlock Traveler’s Pistols with
Dagger and Accessories -A) Calvert Coat Pistol - NSN, 62 cal., 3
inch octagon bbl., brown/casehardened/blue finish, walnut stock.
These types of short barrel, large caliber flintlock pistols were popular
for defense in the British Isles in the late 18th century and early 19th
century. They are often called “great coat,” “coat,” or “traveler’s” pistols
since they could be carried within a coat pocket and were popular
with travelers for use in case of confrontation by highwaymen or other
criminals. The matching pair is marked “CALVERTS” on the lock plates
and has light English style engraving on the locks and small parts. The
Calvert family, headed by William Calvert, were active gunmakers in
Leeds in the first half of the 19th century. The locks also have sliding
halfcock safeties and frizzen spring rollers. The smoothbore barrels
are brown finished Damascus with blade front sights and hooked
breeches. The underside of the barrels have a pair of Birmingham
proofs separated by a hallmark, two dots near the breech, and a lightly
stamped “FINE.” “ST” is below the “FINE” on A. The upper tangs/breeches
are grooved for use as rear sights. The bag shaped stocks have some
attractive figure and nicely shaped flats. They come in a hardwood
case with a “JH” initialed lid plaque and green fabric lined interior
fitted to the pair with two lidded compartments, a small powder flask,
bore rod, “IMPROV’D/No. 23” ball mold, dagger with 4 1/8 inch blade
decorated with golden scrollwork on a blue background, six lead balls,
and a wrench. The mold produces undersized .58 caliber balls (.60 is
commonly used in .62 caliber/20 gauge smoothbores). Though this
would loosely fit the bore without the use of a thick patch, the balls could
be loaded much easier and secured with wadding as was common in other
smoothbores in the period. Though the loose fitting balls would not have
been terribly accurate, these pistols were meant for very short ranges and
the British are known for using undersized balls in their muskets and other
military arms to allow for easier loading and allow for more shots between
cleaning. The dagger, mold, and bore rod have matching carved handles. It
is very rare to find complete sets like this, especially in this high condition.
CONDITION: Very fine. The barrel retains 75% plus of the lightly fading
original brown finish and displays rich twist patterns. There is some slight
spotting and several minor scratches. The lock has a dark gray-brown blend
of patina and 60% mottled original case colors. The lower components
retain 30% of the original blue finish. The stock is also very fine and has
only slight dings and marks and a very small chip at the inlet edge above
the cock. Mechanically excellent and has
a crisp maker’s mark. B) Calvert Coat Pistol - NSN, 62 cal., 3 inch octagon
bbl., brown/casehardened/blue finish, walnut stock. See “A.”
CONDITION: Very fine with 80% plus original brown finish and attractive
twist patterns on the barrel mixed with some light spotting and edge wear.
The lock has 50% dark original case colors and light spotting. The lower
components retain 50% of the original blue and have minor oxidation.
The stock is also very fine and has some minor dings and scratches.
Mechanically excellent and has a crisp maker’s mark. The case is fine with
some separation, numerous scratches, and minor cracking. The lining is
fading to yellow on the lid and some edges of the lower compartment. The
accessories are fine. The dagger blade retains 30% of the finish and has mild
pitting. Overall, this is a very fine set.
Estimate: 10000 - 16000

Nicholas Noel Boutet Craftsmanship Shows Unparalleled Perfection
LOT 252
An Extremely Rare and Superb Cased Pair of
Percussion Pocket Pistols by Nicholas Noel Boutet,
Director Artiste of Versailles, Gunsmith to King Louis XVI
and the Emperor Napoleon, Circa 1803 -A) Nicolas Noel
Boutet Percussion Pistol - NSN, 44 percussion cal., 1 inch round
bbl., bright finish, hardwood grips. These magnificent pistols
were made prior to 1804, the date when Boutet’s son, Pierre-
Nicholas, joined his father at the Versailles Manufactory. Though
of traditional box lock, turn off barrel, folding trigger pocket pistol
design, they transcend all other similar pistols in their execution
and consummate mastery of wood carving, inlay, engraving,
polish, artistry and use of mythological symbols. General Napoleon
Bonaparte’s conquest of Egypt in 1798 made the Sphinx an essential
symbol in French Empire art and it is possible that these pistols
were commissioned by the Directory to commemorate this event
and presented to one of the generals who participated. Research in
the Versailles records at the Metropolitan Museum or the Musee de
l’Armee may reveal the identity of the intended recipient. Nicholas
Noel Boutet is universally regarded as the greatest artist in the history
of firearms and these pistols are proof of this as they are true works
of art in pistol form. The engraving is exquisitely rendered and of a
quality equal to anything by the Brown Brothers or Creative Art only
they are two centuries earlier. As with all of the finest pairs, each
pistol has different engraving, one with a dog and antlers,
urns with fruit, and a mythical head of a harvest deity, and
the other a rooster and a horned devil. The trigger plates each
feature the same beautiful draped goddess but in different
poses, framed standing on urns. Pistols are signed in full on
underside of breeches “Boutet Directeur Artiste” and on top
of frames “Manufact Versailles”. All screws are finely engraved
as are the push on safeties. The centerhammers are engraved
with finely checkered hammer spurs indicating conversion by
Boutet, himself, who worked well into the percussion period.
Though the metalwork of these pistols is of the finest quality
it is the woodwork of the butts that sets them apart from
other Boutets, even the grand double cased pair made for
Napoleon in the Musee de l’Armee which have flat gold inlaid
Sphinxes. Boutet’s woodcarving is always the best quality but
his use of Grenoble walnut, inlaid with ebony, and overlaid
with high raised relief carved polished boxwood is of the
greatest rarity. Each pistol stock is a superb wood sculpture
with relief Sphinxes, caduceus, swords, lyre, and the Masonic
all seeing eye in polished boxwood. The Sphinxes on both
pistols are posed in different positions as on only the very finest
decorated pairs. The pistols are cased in their original upright
casing with the original barrel wrench. A similar upright casing is in
the Metropolitan Museum of Art. 219

Not All Art
is Framed

AS PICTURED AND
DESCRIBED IN A REVIEW OF
162 ANTIQUE ARMS BY HELD
A cased set of Boutets in the Hermitage, Tassasuk figure 319, have
boxwood and ebony inlaid butts though not nearly as magnificent
and elaborate as on this pair. All firearms and swords by Boutet
whether simply military arms or the most magnificent Imperial
presentation pieces exhibit extraordinary quality and attention to
the most minute detail throughout. Boutet’s employment of mixed
carved woods on pistol stocks is an artistic innovation unique to
the Versailles studios and these pistols are among the very finest
examples known.
CONDITION: Extremely fine. The pistol exhibits considerable
bright original polish with some staining appearance with a crisp
engraving. The grip is excellent with a few minor handling marks. The
woodcarving is pristine throughout, as sharp and crisp as the day the
pistols left the Versailles workshops more than two hundred years
ago. Mechanically excellent. The accessories are very fine.
B) Nicolas Noel Boutet Percussion Pistol - NSN, 44 percussion cal.,
1 inch round bbl., bright finish, hardwood grips. As described in “A”
with a few variations. The frame is engraved with a face of a mythical
figure on the left side and a rooster on the right side. Notice that
the floral pattern is also different than the floral engraving found on
“A”. The trigger is engraved with a different version of a classically
styled figure of a woman. Although the right side of the grip retains
the image of a griffin as found in “A”, the left side differs from
“A” as it has a carved
lamassu (an Assyrian
deity with a lion’s body,
eagle’s wings, and human’s
head). The classical symbols
on the outside edge of the
grip are also different. The
variations of the two pistols
complement each other
extremely well and are the
signs of a true pair.
CONDITION: Extremely fine. The
pistol retains much of its original
bright polish with only minor staining. The grip is excellent with a
sharp carving. Mechanically excellent. The woodcarving is pristine
throughout as sharp and crisp as the day the pistols left the Versailles
workshops more than two hundred years ago. The case is in fine
original condition throughout as well.
Estimate: 50000 - 85000
221

222
LOT 253
Finely Engraved, Silver Inlaid, and Relief Carved Pair
of J. Adam Kuchenreuter Percussion Target Pistols
-A) J. Adam Kuchenreuter Target Pistol - NSN, 45 cal., 8
1/8 inch octagon bbl., blue/silver/casehardened finish, walnut stock. The Kuchenreuter
family gunmakers were among the best in the Germanic states in the 18th and 19th
centuries and traced their line back to gunmakers in the region in the 17th century.
Members of the family remain active bespoke gunmakers into the 21st century. Johann
Adam Kuchenreuter (1794-1869) was one of the most talented and most recognized
members of the family and was active until his death in 1869. During his lifetime, he
was the court gunmaker for both the Princely House of Thurn & Taxis of Regensburg
and the King of Bavaria. This pair of pistols follow similar patterns as other Kuchenreuter
target pistols and feature dovetailed blade front sights, key adjustable notch rear
sights, “1” and “2” respectively just ahead of the rear sights, “I. ADAM KUCHENREUTER
IN REGENSBURG.” in silver inlay on top of the barrels surrounded by silver scroll
patterns on the upper flats, the Kuchenreuter maker’s mark on top near the breech
ahead of dual silver bands, elaborate interwined scroll engraving on the remaining
components, adjustable single set triggers, hammer stalls, bestial themed engraving on
the hammers, coordinating incised and relief carved scroll patterns on the stocks along
with flutes along the wrists, and blank silver wrist escutcheons.
CONDITION: Fine with light aged patina on the silver inlays, strong original blue finish
on the bottom of the barrel in the protected area, traces of original blue finish fading to
smooth gray on the exposed areas of the barrel, light gray patina
on the other components, and crisp engraving. The refinished stock
is also fine and has distinct carving and minor dings and scratches.
Mechanically fine. B) J. Adam Kuchenreuter Target Pistol - NSN, 45
cal., 8 1/8 inch octagon bbl., blue/silver/casehardened finish, walnut stock.
See “A.”
CONDITION: Fine with attractive aged patina on the silver inlays, strong original blue
on the bottom of the barrel, traces of original blue on the exposed surfaces of the
barrel which is smoothly faded to gray, light gray patina on the lock and furniture,
crisp engraving, and minor overall wear. The refinished stock is also fine and has crisp
carving, minor stabilized cracks in the breech section, and mild scratches and marks.
Mechanically fine. Overall, a very attractive pair of target pistols by one of the best
Germanic gunmakers of the 19th century.
Estimate: 5500 - 8500

BOTH SIDES PICTURED
LOT 254
Ornate “1764” Dated, Relief Carved, and Panel
Scene Engraved Germanic Half Stock Percussion Conversion
Rifle - NSN, 40 cal., 28 inch octagon bbl., brown/casehardened/bright
finish, walnut stock. The fairly heavy Damascus barrel has circular designs on the
muzzle (probably relined), a globe front sight, notch rear sight, “F-G-K- An
1764” in silver inlay on top near
the breech, and a period rib with
two ramrod pipes below. The lock
is engraved with a pair of deer
and scrollwork. It has replacement
double set triggers. The brass furniture throughout has deep relief
floral scroll and game scene engraving. The stock appears to have been shortened
at the time of the conversion from full stock and is similarly extensively raised relief
carved with extensive Rococo scrollwork. The trigger guard has a hole for a sling swivel,
and the front swivel was likely originally in the forend before conversion.
CONDITION: Very good as period converted to percussion with strong Damascus patterns along the barrel, generally crisp engraving and carving, mix of gray and
brown patina on the barrel and lock, mild oxidation, two small holes filled on the top of the wrist on the otherwise very good stock, light scratches and marks, and
attractive figure. Mechanically fine.
Estimate: 3000 - 4500
BOTH SIDES PICTURED
LOT 255
Fine Silver Accented Percussion “Wender” Combination Rifle/Shotgun by J. Arnold of Altdorf with Relief Carved Stock - NSN, 54 cal., 27 inch octagon
bbl., blue/casehardened finish, walnut stock. The rifled barrel has a dovetailed blade front sight, notch rear sight with folding leaf and scroll finial, “1” and “Jo.
ARNOLD” in silver inlay at the breech, and a “crown/V” on-hand proof (indicating it was in a shop in the 1890s), and the smoothbore barrel has a dovetailed
blade front sight, “2” and “IN ALTDORF” in silver inlay at the breech, and another “crown/V” proof. A mounting point for an absent peep sight
is on the top of the wrist. The stock and forend panels have some incised scroll carving and molding, a detailed deer scene on the left side
behind the cheek rest, and scroll pattern silver plated brass furniture and accents. The trigger guard pulls back to free the barrel group for
rotating. “40” is stamped in the stock ahead of the sling stud.
CONDITION: Fine with 75% original silver plating, a mix of fading original blue finish and dark brown patina on the barrels, traces of original
case colors on the lock and plates below the bolsters, light spotting, and small marks and scratches. The wood is very good with some gaps at
the tail of the forend panels, chip on the lower left corner of the wrist, crisp carving, a few small insect holes, minor marks and scratches, and
some nice figure in the buttstock. Mechanically fine.
Estimate: 4000 - 6000
223

The Dr. Gerald Klaz Collection
LOT 256
Monumental Well-Documented
Masterpieces of The International
Exhibition of 1862: Cased Pair of High
Art Gold and Silver Percussion Pistols
by Brun of Paris with Extensive Sculpted
Metalwork, Relief Carved Ebony Stocks,
and Matching Accessories -A) Brun
Exhibition Pistol - NSN, 45 cal., 9 5/8 inch
octagon bbl., gold/gray finish, ebony stock.
This breathtaking, extraordinary set was
displayed at the International Exhibition
of 1862, also known as The Great London
Exposition, and we have identified one of the
pistols as illustrated as item 4 in “Masterpieces
of Industrial Art & Sculpture at the International
Exhibition, 1862 Vol. 1” in Plate 6: “French
Ornamented Fire-Arms.” The description notes:
“For ‘Armes de luxe’ Paris has long maintained
supremacy over all competitors” and that Brun was
among the Parisian gunmakers of worldwide note at
the exhibition who obtained the highest commendation
of the jury in Class 11. The jury wrote, “The sporting
guns and pistols exhibited by the Paris makers are chiefly
remarkable for the extreme artistic beauty of their decorations,
which are designed and executed with the greatest skill and
taste, the ornamental parts of the gun being highly valued in
France, and in other countries, to which the French gunmakers
export largely, especially South America.” “Record of the
International Exhibition, 1862” also states: “An adequate notice
of the various specimens of artistic firearms in the French court
would far exceed the limits of this article and would indeed
come more properly under the department of fine arts.
224

The Dr. Gerald Klaz Collection
We can but enumerate the most remarkable - Brun (1303) exquisite
pair of pistols in carved box, barrels elaborately chased with a gilt
ground...” They go on to list a few other makers, but Brun is listed
first, and that description is certainly fitting for this pair. The pair
was released to Rock Island Auction from the Metropolitan Museum
of Art where it was on loan as part of the impressive collection
of Dr. Gerald Klaz. Brun was active between 1849 and 1872 and
collaborated with other world-class craftsmen to produce high
art firearms that remain admired today and are among the finest
artistic arms ever crafted. While unique, this pair is in keeping with
other world class French “armes de luxe” displayed at international
exhibitions. Note for example, the pinfire shotgun from Brun in
the MET’s collection (Accession Number: 1993.415) displayed
five years after this pair at the Exposition Universelle of 1867. It
too featured sculpted animal designs, gilded backgrounds, and
complex relief patterns and was designed by goldsmiths François-
Joseph-Louis Fannière (1822-1897) and François-Auguste Fannière
(1818-1900) who executed the chiseled metal work and engraved
by Jean-Claude Tissot (1811-1889). The metalwork on the current
pair also has similarities to the Alfred Gauvain pistols also in the
MET exhibited at the Crystal Palace Exhibition in London in 1851
(Accession Number: 2013.513.1, .2 ). The designs on that pair were
the work of Michel Liénard (1810-1870) and include sculpted reptiles
and floral work like this pair. The pistols exhibit three-dimensional
decoration from the muzzles to the pommels. As noted in the
period sources, the work is exquisite. The barrels, locks, and furniture
have gold backgrounds providing excellent contrast for the sculpted
designs. The consistent motifs tying together the overall design on
both the metal and ebony stocks are grape leaves. It is the opinion
of this writer, based on years studying reptiles and the origin of this
set, that the lizard on the pommel cap is either a European green
lizard or jewelled lizard, two wall lizard species native to France.
Formerly on Loan to the
Metropolitan Museum of Art
226

The Dr. Gerald Klaz Collection
If you look closely at the lizards on the pommels, the arrow shaped heads
have large scales, the bodies have finer scales, and they have long tails
with bands, all characteristics matching these two related species. The
artist clearly took their time to get the details correct. They have pieces
of the surrounding foliage stems in their jaws. The species of the coiled,
threatening snakes on the base of the hammers is less certain, but another
species native to France seems likely, possibly an adder. The bi-pedal
beasts on the nose of the locks present the only designs that differ
between the two pistols. The first pistol has a guivre/wyvern, a winged
beast, and has its tail coiled vertically. The second pistol’s beast is wingless
and has its tailed curled under, possibly a lindworm or sea serpent. With
the hammers down, the snakes appear to be menacing the beasts. The
trigger guards have a mammalian creature with long neck, short legs,
and a long coiled tail, perhaps an artistic representation of a polecat. The
barrels have bead front sights, “BRUN A PARIS” among the designs on the
top flats, “BRUN/A PARIS” on the bottom of the barrels and on the breech
hooks, and sunken star over “A B” mark on the bottom of the breech plugs.
The locks have no external markings. The ebony stocks have grape leaf
and vine carving along their whole lengths and fluting in the wrists. The
case exterior has scroll floral engraved silver trim on the lid, raised relief
carved scroll pattern carving with textured backgrounds, and a gryphon
surrounding a gold bordered and engraved escutcheon. The interior has
“Brun/a paris” in golden cord inside the lid, scroll engraved fittings (some
silver), closely fit compartment containing the pistols and the coordinating
accessories which have extensive engraving and carving in patterns that
match the pistols. For example, the mallet and screwdriver/nipple wrench
handle are ebony and carved with grape leaf patterns has plates on the
ends with grape leaf engraving backed by gold and grape leaf carving
on the sides. The plates on the head of the mallet have floral engraving
backed by gold, and the screwdriver/nipple wrench shaft and tip, powder
flask, bullet mold, measure, oiler, silver plated loading and cleaning rods,
and compartment pull have coordinating floral engraving. The flask also
features silver plating and designs of a lizard on one side and a snake with
barbed tongue and tail on the other.
227

The Dr. Gerald Klaz Collection
228
CONDITION: Excellent overall with the vast
majority of the original gold backgrounds
remaining, some fading in the trigger guard
and pommel backgrounds, light aged
patina on the silver on the trigger guard,
mostly light gray patina on the balance, and
minimal overall wear from age and storage.
The engraving and carving remain crisp.
Mechanically excellent., The case is fine and
has some minor repairs and pieces absent
from the lid and general minor storage wear.
The accessories are very fine and have crisp
engraving and carving, light storage wear, and some aged patina on the silver.
B) Brun Exhibition Pistol - NSN, 45 cal., 9 5/8 inch octagon bbl., gold/gray/silver finish, ebony stock. See “A.”
CONDITION: Excellent overall as “A” with the vast majority of the original gold backgrounds remaining, some fading mainly in the trigger guard and pommel
backgrounds, light aged patina on the silver on the trigger guard, mostly light gray patina on the balance, and minimal overall wear from age and storage.
The engraving and carving remain crisp. Mechanically excellent. This is astonishing set from the International Exhibition of 1862 is certainly one of the most
impressive cased pairs of pistols extant and will most certainly elevate interest in any museum or private collection of fine arms.
Provenance: Dr. Gerald Klaz collection.
Estimate: 225000 - 350000

BOTH SIDES PICTURED
LOT 257
Spectacular Victorian
Wheel Lock Sporting
Gun with Extensive Carved Bone and
Mother of Pearl Inlays - NSN, 65 cal., 33 1/2 inch
part octagon bbl., bright finish, hardwood stock. This is an older Victorian era
wheel lock, possibly dating to the 1880s based on a piece of newsprint in the
barrel channel. The barrel has a dovetailed silver front sight, finely sculpted
transition section, faint “H 1634” marking ahead of the two leaf rear sight, and
“V” and “W” flanking a sighting groove on the upper side flats at the breech. An
“I:B” maker’s mark is on the lower left flat covered by the stock (listed in “Der
Neue Stockel” by Eugene Heer on page 176 as from Saxony around 1600. The
domed lock plate is plain, but the fitting on the interior and exterior have light
engraving. The rear lock screw is absent. It has double set triggers with a brass trigger plate. The stock has extensive staghorn/bone and mother of pearl inlays in a variety of floral and beast patterns as well as hunters.
CONDITION: Good. The barrel has a blend of brown and gray patina and some mild pitting. The lock has mottled dark gray patina and minor pitting and has not been tested. The stock has some repairs, various scrapes and dings.
and cracked, chipped, or loose inlays. The trigger group is loose, but is mechanically fine.
Estimate: 5000 - 8000
BOTH SIDES PICTURED
230
LOT 258
Victorian Era Decorative Scrimshaw
Inlaid Wheel Lock Rifle - NSN, 36 cal., 37
inch octagon bbl., bright finish, hardwood
stock. Late 19th century Victorian era build
using an original lock by Andreas Gans of
Augsburg (c. 1705-1740) signed “ANDREAS
“GANS/IN AVGSBVRG” ahead of the pan.
The lock has a detailed scene of a group
of hunters and their dogs on the main
body, and the engraving extends to the
smaller fittings and inside. The barrel is
unmarked and has a post front sight, notch rear sight, and
crowned muzzle. The trigger guard appears to be off an antique shotgun and has
scroll engraving. The stock has extensive bone/staghorn inlays with various scrimshawed designs, among which are a
mermaid, king and queen, mythical beasts, and a bird of prey capturing another bird.
CONDITION: Good overall with oil staining and gray patina on the iron along with some pitting, cracks and chips in the stock, mostly distinct
designs, and small pieces of absent staghorn/bone. The lock has not been tested.
Estimate: 2500 - 4000

BOTH SIDES PICTURED
BOTH SIDES PICTURED
LOT 259
Fine Germanic Wheel Lock Hunting Gun with Spanner - NSN, 58
cal., 41 3/8 inch octagon bbl., bright finish, walnut stock. The lock has some light
engraving on the exterior and interior. The swamped barrel has blade and notch
sights, two incised bands at the breech, and no visible markings. It may have originally been rifled
and since bored out. The stock has a horn forend cap, deep molding along the forend, scallop and dot
patterns at the ramrod entry point and edge of the butt, a grooved patch box lid, incised borders on the left flat that connect to
scrollwork ahead of the cheek rest, floral engraved staghorn washers for the lock screws, stag engraved staghorn oval on the cheek
rest, dog and game scene engraved staghorn panels on the cheekpiece edge and heel, and an iron buttplate with ball finial. A
collection marking is on the trigger guard. Includes a spanner/multi-tool.
CONDITION: Fine with mostly bright surfaces, some minor pitting, rougher concealed portions of the barrel, aged patina on the brass, absent lower buttplate pin, and mild
overall wear. The stock is very good and has minor dings and chips at the edges, crisp designs, and minor age and storage related wear. The pan and cock mechanisms work, and
the double set triggers function.
Estimate: 4500 - 7000
LOT 260
Heavy Barrel Victorian Wheel Lock Long Gun with Tool
- NSN, 7/8 inch cal., 24 1/8 inch octagon bbl., bright finish, walnut stock. Assembled in the Victorian era from parts of mixed ages.
The smoothbore barrel has a blade front sight on the flared muzzle, standing notch rear sight, and bands at the breech. The lock is
unmarked. The stock has antique ivory/staghorn accents, a wood patch box lid, scroll carving at the front of the cheek piece, and a horn
buttplate. Includes an iron spanner/multi-tool.
CONDITION: Good as assembled during the Victorian era with mostly brown patina, split tang, mild pitting and oxidation, some chips
and cracks in the stock, and general mild wear. Lock not tested.
Estimate: 2250 - 3500
The Estate of William T. Prichard
BOTH SIDES PICTURED
LOT 261
Wheel Lock Rifle - NSN, 66 cal., 34 7/8 inch octagon bbl., bright finish, walnut stock. The barrel
is marked “HANNS WINCKHLER” on either side of a brass cartouche of a rampant lion with two tails (traditional emblem of Bohemia). Another bestial mark is on the upper
left at the breech. Winkler worked in Ferlach, Austria, circa 1737. The stock has some decorative panels of staghorn, incised scroll carving, and iron fittings. The trigger plate, trigger,
and some other furniture appear to be from 18th century muskets. The trigger guard is shaped with finger grooves.
CONDITION: Good as assembled in the Victorian era. The metal displays a mix of gray and brown patina along with mild pitting. The lock is mostly old and shows several repairs and
traces of engraving, and the trigger and sear are not aligned. The stock has multiple cracks and repairs, some chips and slivers absent, and ill-fitting patch box lid.
Estimate: 2000 - 3500
231

The Robert M. Lee Collection
LOT 262
Incredibly Rare and Highly Ornate Pair of Inlaid 16th Century
Saxon Ball Pommel Wheel Lock “Puffer” Pistols -A) Saxon
Wheel Lock Pistol - NSN, 54 cal., 13 inch part octagon bbl., bright
finish, fruitwood stock. This fabulous pair of pistols is believed
to have been part of the collection of the famous State Heritage
Museum in St. Petersburg Russia which has a pair of similar pistols
in its collection today (no. 6661 and 6662) from the Collection of the
Arsenal on display in The New Hermitage in room 227 with similar
barrels with the same markings and type of sights, very similar locks,
and the same stock design. The pair was also formerly exhibited by
the Metropolitan Museum of Art in their Loan Exhibition of European
Arms and Armor from August 3 to September 27, 1931, and then
sold as part of the famous collection of William Goodwin Renwick by
Sotheby & Co. in March 1974 (lot 58). They date to the last quarter of
the 16th century including known examples from the Saxon Royal
Armouries in Dresden and have the classic “puffer” architecture.
The fruitwood stocks have impressive inlaid staghorn designs with
engraved patterns covering essentially all of the surfaces from the
forend caps to the “squashed ball” pommels.
232

Phenomenal, Fresh & Incredibly Important
The patterns have similarities to those on stocks known to be crafted
by master stock maker Klaus Hirt of Wasungen and include complex
intertwining scrolls with blooms and fruit, grotesque masks including
disgorging masks on the sides at the ramrod entry points and either
side of the barrel tangs and a whole series of manly bestial masks on
the pommels, strange restrained beasts on the bottom of the forends,
mermaids at the nose of the locks, nude male characters along with four
dogs and two bears on the left sides (bear hunting and baiting were
popular at the time), and cherub/putto designs. Even the tips of the
wooden ramrods are scrimshawed staghorn and exhibit scale patterns. The
smoothbore, part-octagon/part-round barrels have lightly flared muzzles
with small post front sights, interesting rear tube/peep sights, line and
dash engraving in the midsections, “H” (upper left) and “B” (upper right)
barrel maker’s initials, and antler maker’s cartouches (on top). The locks
have flat plates, enclosed wheels, sprung pan covers, simple line accents,
and teats at the nose and tails. The lock screws traverse through the lock
plates and into the pierced metal belt hooks on the left stock flats which
have a circle and V design and fit very closely to the side of the stocks.
CONDITION: Fine with gray patina and some light pitting on the metal,
generally crisp markings and engraving, some small pieces absent or
repaired on the stock, and general mild wear overall. Lock untested.
B) Saxon Wheellock Pistol - NSN, 54 cal., 13 inch part octagon bbl.,
bright finish, fruitwood stock. See “A.”
CONDITION: Fine with gray patina and light pitting on the lock and barrel,
mostly crisp engraving and markings, some small pieces repaired or absent
on the stock, and mild overall wear. The lock is untested. 16th century
wheellock pistols are rare and valuable treasures, especially those with real
artistic merit like this pair.
The Robert M. Lee Collection
233

Provenance: The State Hermitage Museum, St. Petersburg, Russia, William Goodwin Renwick, Peter Tillou,
The Legendary Robert M. Lee Collection
The Robert M. Lee Collection
234
Similar examples are contained within world
leading museum collections, and this pair is
certainly worthy of a fine display in any antique
arms collection or art gallery.
Provenance: the State Hermitage Museum, St.
Petersburg, Russia, William G. Renwick, Lenoir Josey,
Peter Tillou, Eric Vaule,
The Legendary Collection of Robert M. Lee.
Estimate: 80000 - 150000

BOTH SIDES PICTURED
LOT 263
Elaborate Documented Gold-
Inlaid Ormolu-Mounted Wheel Lock
Target Rifle by Marcus Zellner of Vienna
with Silver Inlaid/Relief Carved Stock - NSN, 62
cal., 31 3/8 inch octagon bbl., blue/bright finish, walnut
stock. The swamped, octagonal, rifled barrel has the gold-inlaid maker’s name “MARCUS ZELLNER
IN WIENN” just ahead of a large gold-inlaid arabesque panel. The breech tang is scroll engraved. It
features a finely filed single-standing rear sight with single folding leaf, simple dove-tailed front sight
surrounded by gold-inlaid scrolls, flat lock plate entirely decorated with engraved scrolls surrounding
the inscribed maker’s name “Marcus Zellner/in Wienn”, cock jaws decorated with shell-form scroll
patterns, and walnut full-stock inlaid overall with silver-wire forming scrolls between large panels of
high-relief carved foliated scrolls and numerous inset scroll decorated ormolu plates, ormolu trigger
guard, ramrod pipes and forend tip. Marcus Zellner (Markus Zelner) was active c. 1693-1758, see “Der
Neue Stockel” by Heer on page 1433. Includes a brief note signed by
Wallace Gusler and dated April 22, 2016.
CONDITION: Fine. The barrel has a blue-brown patina. The lock-plate is a medium grey patina over mild pitting. The edge of barrel channel has losses on each side, and the stock is cracked through wrist though it shows mostly on
the inside. The crack remains visible near trigger guard. The barrel pins and a few screws are absent. It displays the expected wear to gilding on the brass mountings. The hair-trigger is broken, and the lock is untested.
Provenance: Joe Kindig, Jr. to Peter Tillou in 1962.
Estimate: 9500 - 16000
236
LOT 264
Fine Italian Style Plug Bayonet with Sheath - Predating the rise of the later socket and lug mounted weapons, the plug bayonet was a major step in arms development, allowing a man to switch on the fly from carrying a firearm
to carrying a spear or lance, giving him the advantages of both weapons. Originally adopted by hunters and then militaries in the early 17th century, the bayonet was a game changer in terms of land warfare, greatly devaluing
the melee weapons still in use and rendering the then-dominant “pike and shot” formations of mixed spears and muskets obsolete, setting the firearm on its path to being the de-facto standard infantry armament worldwide.
Measuring 19 3/4 inches overall, the 13 5/8 inch blade has a triangular cross-section, with gold accented wire etching on a niter blue field adorning the lower two-thirds, bearing scroll and martial motifs. The short cross guard is
also gold washed, with a smooth ebony grip with muzzle swell and a brass pommel cap. With a brown leather sheath.
CONDITION: Fine. The very fine blade shows 80% strong nitre blue and gold finish, with a mixed gray on the upper third and scattered spotting. The grip is very good, with cracks and some chips around the pommel. The sheath is
good, with scuffs, cracks, and some loose stitching.
Estimate: 3000 - 4500

BOTH SIDES PICTURED
LOT 265
Decorative Saxon Wheel Lock Pistol - NSN, 48 cal., 20 3/8 inch part octagon bbl., bright finish, fruitwood stock. This pistol is similar
in overall layout to others identified as belonging to the Trabants (bodyguards)/Electoral Guard of Prince Christian II, Elector of Saxony,
in the late 16th century and early 17th century (c. 1590-1610) and found in the Saxon Electoral Armories collections in Dresden. Some pistols of this
style are also known that are identified as having been owned by other elite Saxon families. The “pear” shaped pommel and ornamentation style is similar to
other identified pieces in renowned international collections. Note, for example, the pair by Simon Helbig and Hans Fleischer in the collection of the Metropolitan
Museum of Art which have very similar overall layouts and use the same trigger reset spring arrangement. The floral roundels and other stag inlays along the stock are
also very similar to those on other Saxon pistols. This pistol is somewhat unusual in that the inlays are entirely floral and geometric whereas often
faces or animals are included. The barrel and lock both have deep “VF/lion rampant” maker’s marks. The gilded wheel cover has birds and floral
patterns. The barrel also has a cannon style muzzle, engraved bands, ribs and three spherical cutouts on the mid-section,
and light engraving accents. Includes a multi-tool with spanner and powder measure.
CONDITION: Very good as professionally restored overall
with a combination of original and replacement parts
including the dog and dog spring. Most of the iron
remains fairly bright with light surface pitting and oxidation.
The wheel cover has attractive aged patina. The replacement
stock is fine and has minimal marks and scratches
throughout and some slight flaking at the edge of the lock
inlet. The smaller mechanisms function properly, but the
wheel has not been tested.
Estimate: 7500 - 11000
The Estate of William T. Prichard
BOTH SIDES PICTURED
LOT 266
Engraved Short Barreled Victorian Wheel Lock
Rifle - NSN, 56 cal., 17 inch octagon bbl., bright finish,
walnut stock. Assembled in the Victorian era using components of a Germanic 17th century rifle. The lock is engraved with a dog
pursuing a stag and scrolls. The barrel has four-groove rifling, a dovetailed bead style front sight, two-leaf rear sight, and a crude “Z” marking on top
at the breech. The side plate and finger groove trigger guard are brass, and it has a set of double set triggers. The stock has a contrasting forend tip, some scroll
carving, a large cheek piece, contrasting patch box lid panels, and a horn buttplate.
CONDITION: Good as assembled with mottled gray and brown patina on the lock and barrel, legible engraving, aged patina on the brass, and spliced and repaired
stock with some chips and moderate overall wear. The lock is untested, but the set triggers are fine.
Estimate: 2000 - 3000
237

238
LOT 267
Incredible Pair of Victorian Wheel Lock Pistols with
Beautiful Carved Stocks -A) Wheel Lock Pistol - NSN,
54 cal., 16 1/2 bbl., bright finish, antique ivory/wood
stock. These pistols were likely originally manufactured
in the 17th century as plain military holster pistols
and then more recently embellished/restocked, likely
in the Victorian era when highly ornamented antique
weapons were en vogue. The barrels have multiple
somewhat unclear markings on the breech sections.
The markings, including a distinct heart on the upper
right and partially visible “SVL” marking on the left, are
more visible on the “A” gun and appear to indicate the
barrels at least originated in Suhl. The carved panels on
the stock feature a variety of detailed hunting scenes
with dogs subduing various game, among them boar,
deer, and lions. Hunters are also depicted on the left
stock flats and rear of the forends in scenes that differ
between the pistols.
CONDITION: Fine overall with mottled gray patina, light
spotting and pitting, some gaps between the veneer
panels, a few cracks, crisp carving, and varied aging
throughout. Mechanically untested.
B) Wheellock Pistol - NSN, 57 cal., 16 5/8 inch part
octagon bbl., bright finish, antique ivory/wood stock.
See “A.”
CONDITION: Fine overall with mottled gray patina
and light spotting/pitting on the iron and some gaps
between the veneer panels, a few cracks, crisp carving,
and varied aging throughout the stock.
Mechanically untested.
Estimate: 9500 - 16000

BOTH SIDES
PICTURED
LOT 268
Very Attractive Victorian Nuremberg Style Wheel Lock Pistol with Extensive Engraved Inlays - NSN, 50 cal.,
12 3/4 inch octagon bbl., bright finish, wood stock. This elaborate pistol was assembled in the Victorian era, using some
original components, the stock, a close copy of the high end pistols manufactured in Nuremberg in the 16th century. The
three-stage barrel has a flared muzzle and an octagon breech section with a stylized Nuremberg guild mark. The flat lock plate is
mounted with an engraved brass wheel-cover plate depicting dragon-like creatures. The dragon-like engraved motif is repeated
on the cock. The full length wood stock has numerous mother-of-pearl and bone inlays. Each inlay is finely detailed engraved
and decorated in the 16th century style with primarily scroll, floral, and geometric designs. The pearl inlays depict mythical sea
creatures. The barrel
tang is flanked by
inlays featuring
stoic male masks.
Ahead of the
trigger guard
is a grotesque
mask below a large
depiction of a soldier.
CONDITION: Fine as assembled during the Victorian era. The pistol has overall gray patina and minor pitting. The replacement
stock is very fine showing some mild handling marks. The inlays show some typical scattered hairline age cracking. The lock is
untested. Overall a highly attractive piece.
Estimate: 6500 - 8500
BOTH SIDES
PICTURED
LOT 269
Ornate Engraved and Scrimshaw Inlaid Small Scale Wheel Lock Style Pistol -
NSN, 36 cal., 4 5/8 inch part octagon bbl., bright finish, hardwood stock. This is a scaled
down Victorian era made, Germanic style wheel lock pistol and was likely inspired by an
original late 16th century pistol from Nuremberg. The rifled barrel has a flared muzzle
and floral engraving. The tang extends all the way down the back to just before the
ball shaped pommel. The lock has border engraving, bestial wheel plate and cock, and
sprung pan cover. The stock has extensive scrimshawed inlays. A pair of devilish faces are
at the breech. The bottom of the forend has a soldier, and the left has a knight battling a
lion. The ball shaped pommel has silver floral and putti accent and a silver lion cap.
CONDITION: Fine as Victorian era made with minor oxidation and pitting on the iron,
aged patina on the brass and silver, minor marks and scratches, and crisp engraving.
The stock is very fine with crisp scrimshaw patterns and minor storage type wear.
Mechanically not tested but it appears to be fully functional.
Estimate: 4000 - 6000
239

240
LOT 270
Finely Chiseled, Engraved, Gold Accented, and Relief Carved Percussion
Conversion Pistol - NSN, 50 cal., 6 1/4inch part octagon bbl., blue/
casehardened finish, walnut stock. This pistol is likely from Spain in the late 18th century and then converted
in the 19th century. The lock appears to be marked “G.M.L.OGIA” just behind the hammer and also has sunken
martial designs at the center. The barrel has a series of gold filled markings and designs. The furniture is iron and
chiseled with martial motifs. The stock has raised relief carved scroll patterns.
CONDITION: Fine with traces of original blue finish on the barrel, mottled gray and brown patina on most of the
metal surfaces, and mild pitting and oxidation. The fine stock has crisp carving, a few cracks and repairs, and
attractive burl figure. Mechanically fine.
Estimate: 1600 - 2500
LOT 271
Silver Inlaid Spanish Officer’s Percussion Pistol by Paulino
Aretio - NSN, 69 cal., 6 3/8 inch part octagon bbl., blue/silver
finish, walnut stock. This multi-stage smoothbore barrel has
“FABRICADO EN EIBAR/POR PAULINO ARETIO/EL ANO DE 1858”
across the upper flats in silver inlay, banded muzzle and transition point, and silver inlaid
scroll and floral pattern. A swivel mounted ramrod is below the barrel, and a lanyard swivel
is on the butt. The lock and furniture have coordinating inlays.
CONDITION: Very good overall with 85% plus period refurbished blue, nicely contrasting
original silver, some patches of minor pitting, minor marks in the otherwise crisp
checkering, and mild overall wear. Mechanically fine.
Estimate: 1100 - 1600
LOT 272
Engraved and
Silver Inlaid
Miquelet
Percussion Pocket
Pistol - NSN, 64
cal., 3 5/8 inch part
octagon bbl., bright finish, walnut stock. This pistol was
likely produced in Spain around the 1830s to 1850s. It has
finely detailed bands at the muzzle of the multi-stage barrel
which also has inlaid arabesque patterns on top of the
breech section, scroll engraved patent breech and upper tang, scrollwork and an exceptionally
crafted serpent/dolphin chiseled hammer on the lock, coordinating serpent pattern side plate,
additional scrollwork engraving on the trigger guard, border engraving and a shell pattern cap
compartment door on the pommel cap, and smooth stock.
CONDITION: Fine overall with
smooth gray patina, minor
spotting, minor scratches and
marks on the metal and wood,
and crisp engraving and inlay
patterns. Mechanically fine.
Estimate: 1200 - 1700
LOT 273
Engraved and Gold Accented Spanish Percussion Pistol
- NSN, 69 cal., 6 1/4 inch part octagon bbl., blue/gold/bright
finish, walnut stock. The
cannon style barrel has dual
bands at the breech, scrolls on
the upper side flats, and “Dn.
Francisco Riera” on top, all in
gold inlay. The lock has “Vic. Te
Aguirre” below the bolster. The
trigger guard bow has “Agui/
rre” in fancy script. There were
Eibar makers named Aguirre
active in the mid-19th century.
Floral engraving accented by
gilt backgrounds is on the tail
of the lock and other furniture.
The hammer is in the shape of
a dog, and the side plate is a
serpent. The butt has a lanyard
ring. The stock has border
molding, fine checkering on
the wrist, and silver
wedge escutcheons.
CONDITION: Very good overall with mottled gray and brown patina, some moderate pitting
concentrated on the trigger guard and pommel cap, replaced hammer screw, splice ahead of the lock,
mildly worn checkering, a few small chips, and general marks and scratches. Mechanically functions,
but needs work (doesn’t hold full-cock).
Estimate: 1100 - 1600

LOT 274
Pair of Exhibition Quality Engraved and Relief Carved Percussion Dueling/
Target Pistols from Chabry of Bordeaux -A) Chabry Dueling/Target Pistol - NSN,
52 cal., 9 1/2 inch octagon bbl., blue/gray finish, ebony stock. Francois Chabry (1796-
1844) was a gunmaker in Bordeaux, France. His son, Leonce Chabry, was also a noted
painter. The pistols have “1” and “2” respectively on top of the barrels and breech
plugs, “Chabry a Bordeaux” among the etched scroll patterns on the barrels and
marked below the hammers on the lock (in all caps), scroll engraving on the locks and
furniture, coordinating scroll carving on the stocks, and dovetailed blade front sights,
fixed notch rear sights. Given they are a matched pair with a combination of rather
large caliber rifled barrels, fixed rear sights, the overall design, and the light trigger
pulls, these pistols would have certainly qualified for use in a duel. Dueling remained
comparably common in France in the 19th century.
CONDITION: Very good with the period refurbished finish fading to a plum brown
along the barrel, crisp engraving and etching, light aged patina on the lock and
furniture, patches of pitting, some light oxidation, and general mild wear.
The refinished stock is also very good and has distinct carving, a split on the
right edge of the forend, minor cracks in the right side of the wrist and at the
lock screw, and small dings and scratches. Mechanically fine.
B) Chabry Dueling/Target Pistol - NSN, 52 cal., 9 1/2 inch octagon bbl., blue/
gray finish, ebony stock. See “A.”
CONDITION: Very good with crisp engraving, thin period refurbished finish fading to
smooth patina along the barrel, patches of pitting, mostly light aged patina on the
lock and furniture, and mild overall wear. The refinished stock is also very fine and has
glossy finish, distinct carving, minor chip and crack at the lock screw, and some minor
dings and scratches. Mechanically excellent.
Estimate: 5500 - 8500
241

242
LOT 275
Attractive Cased Pair of
Exhibition Quality Gold
Inlaid, Relief Chiseled,
and Relief Carved
Percussion Pistols
-A) Exhibition Quality
Percussion Pistol - NSN,
50 cal., 9 1/2 inch octagon
bbl., gold/gray finish,
relief carved ebony stock. These classic French/Belgian 1850-1870s
dueling style pistols have no visible identifying markings aside from “1” and “2”
respectively on the barrels and upper tangs in gold and Liege proofs on the left side
of the barrels. They have rifled bores, fine blade and notch sights, and extensive
ornamentation. The barrels, locks, and furniture are sculpted, and engraved with
scroll, shell, star, and floral patterns accented by gold inlaid borders which are also
engraved and feature floral blooms. The trigger guards are complex and sculpted
with scrolls and have spurs. The ebony stocks have extensive scroll and floral
carving and fluted wrists. They come in a closely fitted case with engraved, pierced,
brass designs around the key hole and the lid. The central escutcheon on the lid
is engraved with “M.N.V.” In addition to the pistols, the case contains loading and
cleaning rods, worm, brush, a scroll carved mallet, two carved containers, sculpted
screwdriver and nipple wrench with carved handles, silver and gold combination
powder flask, and two ball molds.
CONDITION: Very fine with crisp engraving and bright original gold throughout,
dark gray patina on the remaining metal, and some light oxidation. The stock
is also very fine and has crisp carving and minor age and storage related wear.
Mechanically excellent. The case is fine and has mild overall wear such as scratches
and marks on the wood and some fading and staining on the lining. The accessories
are all fine and have generally light storage wear.
B) Exhibition Quality Percussion Pistol - NSN, 50 cal., 9 1/2 inch octagon bbl.,
gold/gray finish, ebony stock. See “A.”
CONDITION: Very fine with crisp engraving and bright original gold throughout,
dark gray patina on the remaining metal, small crack in the hammer, and some
spots of light oxidation. The stock is also very fine and has crisp carving and minor
age and storage related wear including a few scratches. Mechanically excellent. This
is a very attractive and classic pair of exhibition quality European percussion pistols.
Estimate: 9000 - 14000

243

The Dr. Gerald Klaz Collection
244
LOT 276
Desirable Pair of Engraved and Gold Accented Boutet
Flintlock Dueling/Officer’s Pistols -A) Boutet Flintlock
Pistol - NSN, 50 cal., 9 1/2 inch semi-octagon bbl., blue/
gold/bright finish, walnut stock. Nicolas-Noël Boutet (1761-1833) was gunmaker-in-ordinary to King Louis XVI in
1788 and became the artistic director of the arms factory at Versailles in 1792 and then its head director in 1798.
Under his direction, some of the finest “de luxe” firearms ever made flowed from Versailles and were presented to
military officers, politicians, and foreign dignitaries during Napoleon’s reign. These early 19th century pistols have
a swamped, semi-octagon (round bottom) barrel marked “Boutet Directeur Artiste” on top and “L.C.”, “N.B”, and
“L.C” at the breech along with “D.B” on the bottom left, fine poly-groove rifling, dovetailed blade and notch sights,
gold accented floral engraving at the breech, stars and stippled patterns along much of the visible surfaces, a pair
of gold bands at the muzzle, and an oval gold vent liner. There are “. .” assembly markings repeated at multiple
points at the breech and inside the forend of the first pistol. The bright barrel tang and furniture have border and
floral engraving. The lock is marked “MANUFRE/AVERSAILLES” and has a gold lined pan and a frizzen spring roller.
The trigger guard has a spur, and the set trigger is adjustable. The wrist is checkered and has carved borders, and
the lower edge of the pommel is also carved with a floral border.
CONDITION: Fine with most of the light blue finish and 90% gold remaining on the barrel along with a few
spots of isolated pitting near the vent, abrasive marks on muzzle, mostly bright polished furniture, some
minor oxidation, crisp engraving and markings, epoxy repair visible inside the forend visible only with the
barrel dismounted, minor wear on the refinished stock with otherwise crisp checkering, some flaking along
the carving at the edge of the pommel, and general mild age and storage related wear. The set trigger needs
some adjustments; otherwise mechanically excellent. B) Boutet Flintlock Pistol - NSN, 50 cal., 9 1/2 inch semioctagon
bbl., blue/gold/bright finish, walnut stock. See “A.”

CONDITION: Fine with distinct engraving, markings, and stippling, 90% gold and fading blue remaining on the barrel; mostly bright polished lock and furniture,
some minor oxidation, and general minor wear from age and storage. The refinished stock is good and has an epoxy repair inside the forend visible only if the
barrel is dismounted, a repaired crack in the wrist near the pommel, otherwise crisp checkering, a hairline tension crack at the rear lock screw on the left flat, and
light scratches and marks. The cock catches on the half-cock notch if the set trigger is used, but it is otherwise mechanically fine. This is a very attractive pair of
French Empire pistols from Boutet and the Versailles Manufactory.
Provenance: Dr. Gerald Klaz collection.
Estimate: 25000 - 40000
The Dr. Gerald Klaz Collection
245

The Dr. Gerald Klaz Collection
246
LOT 277
1859 Dated Cased Pair of Chiseled and Carved Exhibition Quality Percussion Dueling Pistols by LePage
Moutier -A) LePage Moutier Dueling Pistol - Serial no. 1701, 48 cal., 9 5/8 inch octagon bbl., bright finish, relief
carved ebony stock. Gilles Michel Louis Moutier-LePage (1810-1887) began running the famous LePage arms
firm in Paris in 1842, and they began marking their arms LePage Moutier. Like his predecessors, he oversaw one
of the most prestigious gunmaking firms in Europe, and he won medals at French and international exhibitions,
including the Great Exhibition in 1851. He was joined by Emile Henry Faure Le Page in 1865 and left the firm in his
control in 1868. This pair is engraved with extensive relief floral scroll patterns inhabited by wyverns on the locks
and trigger guards, deep floral patterns on the pommels, “LePage Moutier arqer Brevete a Paris” on the top of the
barrels, and “LEPAGE MOUTIER” in banners below the hammers. The engraving has stippled backgrounds. The
pistols are marked “N1701/10004./A. 1859” on the bottom of the barrels, and “1701” is repeated on the inside of the forends, breech hooks, and breech faces. The upper tangs have “1” and “2” respectively among the engraving. The
bottom of the breech plugs have “crown/L-B.” The ebony stocks have relief and raised relief carved floral scroll patterns and silver wedge escutcheons. The rosewood case has an “A” engraved on the central escutcheon along with
scroll designs and contains a mallet, bullet mold, screwdriver/nipple wrench, LePage powder flask, loading and cleaning rods, a small measure, and a key.
CONDITION: Fine overall with some spots of minor discoloration on the otherwise bright metal surfaces, dark aged patina on the silver, crisp engraving and carving, and minor overall wear. Mechanically excellent. The case and
accessories are very good and have storage wear including some minor cracking in the lid. B) LePage Moutier Dueling Pistol - Serial no. 1701, 48 cal., 9 5/8 inch octagon bbl., bright finish, relief carved ebony stock. See “A.”
CONDITION: Fine overall with only slight spots of discoloration on the otherwise bright metal surfaces, deep aged patina on the silver, crisp engraving and carving, slight edge wear, and general light handling and storage type
marks. Mechanically excellent.
Provenance: the Dr. Gerald Klaz collection.
Estimate: 7500 - 9500

LOT 278
Cased Colgan of Limerick Engraved Percussion Pepperbox - NSN, 42 cal., 3 3/8 inch fluted bbl.,
casehardened finish, walnut grips. This revolver came out of the shop of Colgan & Son or William Colgan
in Limerick, Ireland, around the 1840s. It has “COLGAN, LIMERICK” inscribed on the left side of the frame,
light London proof and view type markings in the flutes of the six-shot barrel group, scroll and floral
engraving, a sliding safety, silver wrist escutcheon, checkered grip, border carving at the butt, and a small
cap compartment inside the engraved cap. The red velvet lined mahogany case has a label with a coat of
arms with three crescent moons with a band of three five pointed stars, a bird with a laurel branch over a
torse crest above the escutcheon, a banner with the motto “BEATI PACIFICI.” below (blessed are those who
make peace), and “Henry Fitz Simons” on the bottom. The case also contains a powder flask, patch cutter,
screwdriver, nipple wrench, oiler, rod, cap tin, and bullet mold. The identity of the owner is not clear
given the many men by that name in the period. One candidate is Henry Fitzsimons (1824-1902) who
immigrated to the U.S. from Ireland in the early 1850s and lived in Rock Island, Illinois, through at least the
early 1860s and is buried in Poweshiek County, Iowa.
CONDITION: Very good with strong patches of original niter blue on the top of the trigger, mottled gray
patina on the balance of the metal, crisp engraving, distinct checkering with some mild wear, and some
minor marks and scratches. The barrels do not consistently rotate when fired, but otherwise mechanically
fine. The case and accessories are very good and have mild overall wear. This is a nice set. Firearms out of
mid-19th century Ireland are rare and particularly interesting given Ireland’s turbulent
history in that period.
Estimate: 4000 - 6000
LOT 279
Engraved Four Shot Swivel
Breech Box Lock
Percussion Pistol -
NSN, 38 cal., 3 inch
solid rib bbl., blue/
casehardened finish,
walnut grips. This pistol is unmarked aside from
London style proof and view marks on the fluted barrel
ribs and scroll engraving. The barrels rotate by hand to allow
for 4 relatively quick shots using dual triggers and hammers.
The grip has a silver thumb plate, fine checkering, and an engraved
German silver pommel cap with threaded ramrod.
CONDITION: Very good with mostly dark gray and brown patina, some mild pitting/
oxidation, cracked neck and chipped nose on the right hammer, and moderate overall wear.
The grip is also very good with minor marks and scratches in the otherwise crisp checkering.
Mechanically fine.
Estimate: 1100 - 1600
LOT 280
Very Fine Cased
Engraved German
Silver Frame
English Percussion
Pepperbox - NSN, 46
cal., 3 1/2 inch fluted
bbl., casehardened/
German silver finish,
highly figured walnut
grips. This incredible
English pepperbox is
marked “IMPROVED/
REVOLVING PISTOL” on
the right side of the
German silver frame and
has casehardened finish
on the barrel group,
hammer, and trigger
guard; niter blue trigger and safety, scroll engraving, London proofs and numbered barrels (1-6), and attractive burl
walnut grips with varnish finish and “116” in tiny numerals on the left panel (probably a collection inventory number). The
case has a William Fry of Derby trade label, royal blue lining, a small brass powder flask, bore rod, ball mold, and key.
CONDITION: Very fine with 75% plus original case colors (particularly vibrant in the barrel flutes), light aged patina on the
frame and trigger guard, 20% original niter blue, crisp engraving, legible markings, and minor overall wear indicative of
a firearm that has seen very little use and has been well-maintained. The grips are also very fine and have glossy varnish,
minor scratches, slight gap on the top left, and attractive figure. Mechanically excellent. The case is very good and has
mild wear and some slivers of the interior border trim absent. The accessories are good with moderate wear. This is a very
attractive pepperbox. English pepperboxes in general are less common than their American counterparts, and finding
them in high condition with brilliant case colors is particularly difficult making this an excellent addition to any
antique arms collection.
Estimate: 2250 - 3500
LOT 281
Fine Engraved European Double Action Pinfire
Pepperbox Revolver with Pipe Case - NSN, 7 mm cal.,
1 7/8 inch round bbl., blue finish, antique ivory grips.
Manufactured by an unknown firm, with fine scroll and
floral pattern engraving, Liege proofs on the cylinder, and a
repeating assembly number “5” on some components and
“V” on others. Fitted with a pair of smooth grips, with a
black leatherette “pipe” case included.
CONDITION: Fine, with 40% of the original blue
finish, strongest in the barrel flutes, with a mixed
gray patina overall. Bright edge wear and mild
spotting are also present. The grips are also
fine, with minor age lines visible around the
escutcheons and a fine aged color and grain.
The case is very good, with scuffing and wear.
Mechanically good.
Estimate: 1200 - 1800
LOT 282
Scarce Hallmarked Silver English Bag Flask - Likely
manufactured during the early 19th century this is a
very scarce English “bag” type powder flask that bears five silver
hallmarks. The hallmarks appear to be a “TC” or “TO” maker’s mark, an “anchor” Birmingham
proof, two unidentified proofs, and what appears to be the “duty mark” of King William IV which would date
the flask from 1834 to 1837. The body of the flask is solid silver with the remaining fittings of brass. The only
other markings on the flask are the dram measurements on the adjustable spout and there is a lanyard ring
attached to the bottom.
CONDITION: Very fine, silver body shows an attractive age-darkened patina and the brass fittings also show an
attractive antique patina. A scarce flask that deserves a place within a very prestigious cased set!
Estimate: 1400 - 2250
247

248
LOT 283
Scarce and Very Fine Cased Pair
of Engraved and Silver Mounted
Manton Marked Percussion
Pistols with Four Extra Barrels
-A) English Percussion Pistol - NSN,
44 cal., 10 inch octagon bbl., brown/
casehardened/silver/blue finish,
walnut stock. Cased pairs of antique
muzzle loading pistols are a staple of
any antique gun collection, but cased
pairs with multiple matching barrel
sets are very scarce. This scarce and
well-made set of early percussion
pistols would have been suitable for
target shooting, dueling, military
service, and self-defense depending
on the set of barrels equipped at the
time. It is a product of the expansive
Birmingham gun trade and does not
have serial numbers. The general style
and quality of the set is similar to
genuine Manton pistols. The markings
on the silver furniture dates the set to
1824 or shortly thereafter. The locks
are signed “Manton” and have scroll
and border engraving and sliding
safeties. The barrels are Birmingham
proofed. The pistols are fitted with
10 inch barrels with .44 caliber rifled
bores and include an extra pair of 10
inch barrels with .44 caliber smooth
bores and a pair of 7 1/8 inch barrels
with .50 caliber rifled bores. Each of
these lengths includes the breech
plugs which are casehardened and
have platinum bands and plugs. Half
of the barrels have “1” on the bottom
of the barrels and breech plugs, back
of the breech hooks, and the other
half have “2” in the same locations.
Gun “A” has a “2” next to the breech hook slot, and “B”
has a “1.” The short barrels are inscribed “London” on
top in ornate script, and each of the barrels has scroll
engraving at the muzzle and breech and dovetailed
silver blade front sights. The casehardened upper
tangs have notch rear sights and floral engraving.
The ramrod entry pipes and trigger guards are blued
and also have floral and scroll engraving. The pistols
are equipped with adjustable single set triggers. The
forend caps, wedge escutcheons, wrist escutcheons,
and attractive lion head pommel caps are all silver. The
latter have “F&J” maker marks (likely Freeth & Jennings) and Birmingham hallmarks for 1824 (script “A”). The set comes in a fitted hardwood case with a
reproduction Joseph Manton trade label inside the lid, several rods, a powder flask, mallet, two ball molds, a nipple wrench, and some lead balls.
CONDITION: Very fine with 85% plus original brown and blue finish, strong original case colors, dark aged patina on the silver, minimal minor spotting,
and some minor marks and scratches. The stock is likewise very fine and has crisp checkering, smooth finish, and some very minor scratches and
dings. Mechanically excellent. The additional barrels are also very fine and on average retain 85% plus original brown finish and strong case colors on
the breech plugs and exhibit minor storage wear. The relined, repatitioned case is good and has some cracks and moderate wear. The mallet head is
cracked and chipped. The other accessories are generally fine or better and have some age and storage related wear.
B) English Percussion Pistol - NSN, 44 cal., 10 inch octagon bbl., brown/casehardened/silver/blue finish, walnut stock. See “A.”
CONDITION: Very fine with 75% plus original brown, 85% original blue finish, strong original case colors, dark natural aged patina on the silver, slight
spotting on the barrel, and some minor marks and scratches. The stock is very fine aside from a small chip on the left edge at the breech and has crisp
checkering, smooth finish, and minimal handling and storage wear. Mechanically excellent. This is a very attractive and scarce set of English percussion
pistols complete with rare additional pairs of barrels which would have made them especially versatile for a 19th century gentleman.
Estimate: 16000 - 22500

LOT 284
Engraved J. Braddell & Son,
Belfast Marked Side by Side Rotary
Underlever Howdah Pistol - Serial no. 5116,
23 bore cal., 7 1/2 inch solid rib bbl., brown/casehardened
finish, walnut stock. Joseph Braddell purchased William Cole’s firearms business c. 1838,
the company remains active in the 21st century. This c. 1880s 23 bore rifled double barrel
pistol has London proofs on the Damascus barrels and water table and classic English scroll
and rosette engraving patterns. The barrel rib has a bead front sight and is signed “J. BRADDELL & SON.
BELFAST.” The back action locks are also signed “J. BRADDELL & SON.” The serial number is marked on the
lower tang. The forearm and stock are checkered.
CONDITION: Fine with crisp markings and engraving, 30% original case colors on the locks and protected areas, lighter
original case colors elsewhere fading to gray and brown patina, visible twist patterns and faded original brown finish on the barrels
along with streaks of lighter patina, and mild overall wear. The wood is also fine and has crisp checkering and some small dings and
scratches. Mechanically excellent. This pistol would certainly have been persuasive in stopping man or beast.
Estimate: 8500 - 13000
BOTH SIDES
PICTURED
BOTH SIDES PICTURED
LOT 285
Fine Engraved Holland & Holland .577 (3
Inch Black Powder Express) Rotary Underlever Double Barrel
Big Game Hammer Rifle with Case - Serial no. 7656, 577 cal., 26 1/4
inch bbl., blued/casehardened finish, walnut stock. The maker’s records
confirm that this rifle was ordered on July 13, 1883. With blacked barrels
with partially matted raised rib signed “HOLLAND & HOLLAND. 98. NEW BOND STREET. LONDON. WINNERS
OF ALL THE PRIZES AT THE “FIELD” RIFLE TRIALS. LONDON. 1883” and with bead front sight and rear express
sight of one standing and three folding leaves each with platinum inlaid center line and graduated from “50”
to “400” yards, and with doll’s head extension engraved with a shell. Action with carved percussion fences and
engraved “CHARGE 6 DRAMS. CASE 3 INCHES” on the left side, non-rebounding back action locks each signed
“HOLLAND & HOLLAND”. Border, bouquet and scroll engraving throughout. Barrels and action struck with London black powder proof marks.
Well figured pistol grip stock with raised cheekpiece, checkered grip and forearm. With brass cornered oak and leather case with accessories, the lid with Holland &
Holland printed trade label. Copies of the Holland & Holland record entry for this rifle accompany this lot as well as documents regarding the accessories.
CONDITION: Barrels professionally reblacked, some wear to rib signature but remains clear, some corrosion spotting visible beneath finish. Action and locks cleaned to dull
light grey patina, engraving clear. Stock refinished, checkering refreshed, some slight blemishes. Case of recent manufacture, in very good condition.
Provenance: The Malcolm King Collection.
Estimate: 7000 - 10000
A Selection of Fine Arms from the Esteemed Collection of Malcolm King
249

A Selection of Fine Arms from the Esteemed Collection of Malcolm King
250
LOT 286
Extremely Fine & Rare Panel Game Scene Engraved William Greener
.600 “Grade 2” Double Barrel Percussion Rifle with Extra 16 Bore
Shotgun Barrels and Sporting Bayonet in Case - Serial no. 4479, 16
gauge, 30 inch bbl., browned/casehardened/blued finish, walnut stock.
The makers have kindly confirmed that this fabulous rifle and shotgun
combination set was completed in 1852. It is published in “The Greener
Collections” by Graham Greener (pp. 35-37) detailing the colorful story of
how Graham purchased the set from Argentina. The rifle barrels are of fine
browned Damascus twist fitted with socket for the detachable bayonet to
the right side. The bayonet of hollow triangular section with spring catch
to secure it in the socket. Raised rib signed “WILLIAM GREENER. MAKER
LONDON. INVENTOR OF THE EXPANSIVE BULLET” and engraved with fine
scrollwork towards the breech end, fitted with a bead front sight and
blued rear sight of one standing and two folding leaves. Casehardened
patent breeches engraved with a brace of game birds on the rib between
and each fitted with platinum plugs. The smoothbore barrels of browned
Damascus twist with concave rib signed “W. GREENER. MAKER. LONDON.
LAMINATED STEEL, INDESTRUCTIBLE BY GUNPOWDER” and engraved with a spray of scrollwork at the
breech end, bead front sight, and casehardened patent breeches each with platinum plug and engraved
with a portrait of a dog on the rib between. Each set of barrels with own white metal mounted ramrod.
Casehardened standing breech, side locks each signed “W. GREENER” with finely sculptured hammers,
trigger plate incorporating a blued grip safety, blued trigger guard and butt plate. Fine
scroll engraving throughout interspersed with vignettes involving exotic game
animals and hunting dogs. Both sets of barrels struck with Birmingham
proof marks and dated “1852”. Well figured semi-pistol grip half stock
with checkered grip and forearm, a blank silver initial escutcheon inset
at the wrist, the underside of the butt with blued sling eye. In original
brass bound mahogany fitted case lined in finely tooled pigskin
with accessories including bullet mold, powder and shot flasks, and
casehardened mainspring clamp. The lid with printed W. Greener trade
label, the exterior with remains of old luggage labels.
CONDITION: Each set of barrels retaining 95% original browned finish
with fine Damascus pattern, some scattered spots of loss to finish,
occasional corrosion spot marks, engraving crisp. Breeches retaining
98% original bright casehardened finish with crisp engraving. Locks
and furniture collectively retaining 95% original blued and casehardened finish, some minor
age loss mostly to bluing on butt plate, engraving crisp and very finely executed throughout. Stock
refinished with minor storage and handling blemishes, slight flattening to a couple of spots of checkering and
minor chipping to right edge of the forearm, and a repaired crack on the forend. Case in very good condition,
minor age related wear and straining to lining, minor damage to partitions.
Provenance: The Malcolm King Collection.
Estimate: 6000 - 9000

The Finest John Dickson & Sons 8 Bore Percussion Rifle
A Selection of Fine Arms from the Esteemed Collection of Malcolm King
252
Charles Gordon
LOT 287
Extremely Fine Unique Engraved John Dickson & Son 8
Bore Double Barrel Percussion Duck Shotgun with Original
Case and Accessories Made for the Famed Scottish Eccentric
Charles Gordon - Serial no. 3827, 8 Bore gauge, 34 inch solid rib
bbl., brown/casehardened/blue finish, walnut stock. The makers
records confirm this gun was ordered by Charles Gordon on
25 October 1883 and remains in apparently unfired condition.
Gordon ordered a total of five double barrel 8 gauge percussion
guns from Dicksons, with this being the first. With browned fine
Damascus barrels signed “JOHN DICKSON & SON. 63 PRINCES
STREET, EDINBURGH” on the raised concave rib and with bead
front sight. Casehardened patent breeches finely engraved
with scrollwork on the rib and each with pierced platinum
plug engraved with a rosette. The underside of the barrels
struck with London black powder proof marks and the original
brass mounted ramrod held in place by three ramrod pipes.
Casehardened standing breech with long tang and back action
locks each signed “JOHN DICKSON & SON” and with “Antediluvian”
hammer with blued detachable nose. Furniture comprising
blued trigger guard and checkered butt plate, and casehardened
trigger plate, barrel cross bolt key escutcheons and forearm finial.
The whole finely engraved with tight scrollwork. Nicely figured
stock with checkered grip and forearm, the underside of the
butt inset with a blank silver initial escutcheon. In original brass
cornered oak fitted case lined in tooled pigskin, the lid with John
Dickson & Son leather trade label with gilt lettering, and a full
suite of accessories including brass topped Hawksley powder
flask with nozzle graduated from “4” to “6” drams of powder and
with pigskin covered body, Hawksley shot flask with pig skin bag
and casehardened top graduated from “1 1/2” to “2” ounces of
shot, a large Hawksley oil bottle, wad cutting punch, white metal
Bartram circular percussion cap dispenser and various turnscrews
and cleaning tools. Please see Donald Dallas, “Charles Gordon
Magnificent Madness”, pp. 43-45 where this gun is discussed and
illustrated. This gun is also the subject of an online “The Explora”
article by Anthony Alborough-Tregear (Trigger) of Westley
Richards, April 19, 2017.

Magnificent & Rare John Dickson & Sons 8 Bore "Duck Gun" Made for the Famed Collector Charles Gordon
CONDITION: In incredible original condition. The barrels retain nearly all of the original
browned finish, the breeches nearly all of the original casehardened finish. The standing
breech and back action locks again with nearly all of the original casehardened finish,
perhaps the slightest loss to finish from handling around the back of the locks. The bluing
on the trigger guard has flaked leaving around 60% remaining. The butt plate has fared
better and retains around 95% original blued finish with some rubbing around the edges.
Stock has nice figure, well defined checkering, and only minor handling blemishes. The
case and accessories are in similar magnificent condition. Mechanically excellent.
Provenance: The Malcolm King Collection.
Estimate: 35000 - 60000
AS PICTURED AND
DESCRIBED IN THE BOOK
CHARLES GORDON
MAGNIFICENT MADNESS
BY DALLAS
A Selection of Fine Arms from the Esteemed Collection of Malcolm King
253

LOT 288
Engraved Edward M. Reilly & Co 8 Bore Under Lever
Hammer Shotgun - Serial no. 25363, 8 Bore gauge, 28 inch solid rib bbl., blue/
casehardened finish, walnut stock. Blue steel dovetail lump barrels with a single bead
sight on the smooth rib marked “E.M. REILLY & Co. 295 OXFORD St. LONDON”, doll’s head
rib extension, single extractor, and mixed London and Birmingham proofs on the flats. Heavyweight, casehardened action
and locks with sculpted fences and hammers. London and Birmingham proofs on the water table, and knurled under lever. The lock
plates and action feature flourishes of light scroll engraving with maker’s marks on each lock. Checkered forearm and pistol grip stock with
lightly engraved fittings, Anson latch gold initial oval engraved with the bust of a roaring lion, and solid recoil pad.
CONDITION: Good with 85% refinished blue over visible pitting and dings on the barrels, legible rib markings, and patches of spotting and edge wear. The action and locks have an
overall mottled gray/brown patina with areas of darker spotting/oxidation, and some light pitting. The wood is also good with small dings overall, moderately worn checkering, and heavily
deteriorated pad. Mechanically excellent.
Estimate: 2250 - 3500
LOT 289
Engraved Antique H. Holland Double Barrel Under Lever Damascus
Hammer Shotgun - Serial no. 2645, 12 gauge, 29 5/8 inch solid rib bbl., brown/
casehardened finish, walnut stock. Single bead sight on the smooth concave rib marked
“H. HOLLAND 98. NEW BOND St. LONDON” with 2 3/4 inch chambers, single extractor, and cylinder/cylinder
chokes. The receiver, lock plates, and hammers feature fine splashes of English scroll engraving with sculpted fences, “H.
HOLLAND” marked on each lock plate, sculpted hammers, checkered under lever, and dual triggers. Checkered wedge fastened splinter forearm
and straight grip buttstock with a blank silver initial oval and smooth steel buttplate. With a custom leather takedown case with green felt interior, added “H. HOLLAND”
retail label on the inside of the lid, and a number of small tools and reloading dies for shotgun shells. The barrel and stock measurements are: .730/.731 inch; minimum wall thickness
.030/.027 inch; drop at comb 2 inches; drop at heel 2 1/2 inches; length of pull 14 inches.
CONDITION: Fine. The barrels have a mostly brown/gray patina with areas of spotting, some light dings, and some visible surface pitting. The markings are clear and legible and the Damascus
pattern is strong. The receiver and lock plates have a mostly smooth gray patina with some light spotting, crisp engraving, and traces of original case
colors in the protected areas. The wood is fine with well-defined checkering, numerous dings and pressure dents overall, and a hairline crack just to
the right of the triggers. Mechanically excellent. Case is fair as re-covered with scuffs and dings throughout.
Estimate: 2000 - 3000
254
LOT 290
Eaton & Abbey, Chicago Marked Double Barrel Side Lock Hammer 10
Gauge Shotgun - Serial no. 10046, 10 gauge, 34 inch solid rib bbl.,
brown/casehardened finish, walnut stock. Single brass bead
sight, with “EATON & ABBEY, CHICAGO - LAMINATED
STEEL” on top of the rib, light scroll engraving on
the casehardened breech, and English proofs
on the underside. The locks and hammers are
casehardened and scroll engraved, with “EATON
& ABBEY” on each lock. Checkered one piece
straight grip stock, with an inscription oval on
the underside of the buttstock and a smooth
shotgun buttplate. Length of pull is 14 inches.
Established in Chicago, the firm of Eaton & Abbey
was in operation until 1870, when Charles Eaton died, and his
widow, Emma Eaton bought out his partner, after which the firm
became “E.E. Eaton”.
CONDITION: Near mint as professionally restored, with a very strong laminated steel pattern on the barrels, along with extremely
bright and vivid colors on the locks, hammers and breech. Stock is also near mint, with a few light chips and pressure dents.
Mechanically excellent.
Estimate: 1800 - 2750
LOT 291
Desirable Eley Military and
Sporting Cartridge Board -
The frame measures 31 x
25 1/4 inches. The display
includes a variety of calibers
of military and sporting rifle
and pistol cartridges, shot
shells, primers, and caps.
The cartridges run from tiny
.22 shorts up to the .475
No. 2 Nitro and the Eley
Ammunition logo is proudly
displayed at the center.
This would be excellent
for displaying as part of a
collection of fine
British firearms.
CONDITION: Fine overall, the
background shows fine color
with very minimal fading and
all cartridges appear to be
present. The slightly faded
frame shows some scattered
mild handling/storage wear.
Estimate: 4500 - 7000

BOTH SIDES PICTURED
LOT 292
Fine Engraved
Westley Richards 12 Bore Double Barrel
Percussion Shotgun with Case - Serial no. 9178,
12 Bore gauge, 30 inch bbl., walnut stock. Manufactured
in circa 1855-60. With browned damascus steel smooth barrels
with solid smooth rib signed “WESTLEY RICHARDS. 170. NEW BOND St
LONDON.” front brass bead, two ramrod pipes, and brass tipped hardwood rod.
Casehardened breech with platinum pierced discs and lines. Casehardened hammer
and locks with light scroll and border engraving and signed “WESTLEY RICHARDS”
on each lock. Blued trigger guard with extended tang marked “9178”, and smooth
double triggers with engraved, shaped coconut finial trigger plate and ramrod insert.
Checkered straight grip walnut stock with silver oval initial escutcheon,
sling eyelet, and extended engraved butt plate. With period case with brass
corners, handle marked “ALEXANDER HASTIE ESQR. GLASGOW”, and blank
initial escutcheon, lined in green baize with maker’s label with address of
23 Conduit St, London. Includes various tools and accessories including a
shot bag, powder flask, and turn screws.
CONDITION: Very good with 90% of the rebrowned finish remaining with
some discoloration and soft markings. The breech, locks, and hammers retain approximately 70% of the refurbished casehardened finish with areas of
smooth pitting. The trigger guard and butt plate retain 50% of their original vibrant blue finish with most of the loss on the butt plate with some areas of
discoloration. The refinished wood is very good with numerous scratches and dings, well defined checkering, and some chipping of the edges. The case
is good with several scratches on the exterior, a large crack, and some slight tears to the interior, and staining to the label. Mechanically excellent.
Provenance: The Malcolm King Collection.
Estimate: 2500 - 4000
BOTH SIDES PICTURED
LOT 293
Fine Panel Game
Scene Engraved
W.M. Nixon 14
Bore Double
Barrel Percussion
Shotgun with Case -
NSN, 14 bore gauge,
30 inch bbl., browned/
casehardened/blued finish,
walnut stock. William Nixon is recorded
in Birmingham from 1845 until 1853 at 9 Duddeston Row.
This gun dates to circa 1850 and has browned Damascus
twist barrels with raised concave rib signed “W.M. NIXON.
MAKER. 369” and with bead front sight. Casehardened
patent breeches with fine engraved border line and inlaid with two gold lines and engraved with pheasant on the rib
between. The barrels struck with Birmingham proof marks. Casehardened border and scroll engraved standing breech and
bar in wood locks, the latter also engraved with differing game scenes and each signed “NIXON MAKER”. Casehardened
trigger plate, blued trigger guard engraved with a tiger on the trigger bow, and blued butt plate. Well figured pistol grip stock carved with a lion mask
on the base of the grip, checkered grip and forearm, and inset with a silver escutcheon engraved with a crest on the wrist. Iron and brass mounted ramrod with worm. In original brass cornered mahogany fitted case lined in tooled
pigskin, the lid with printed William Millington Nixon trade label, with some accessories including Hawksley powder flask and a shot flask. The exterior of the lid with circular brass escutcheon engraved “LT. COLONEL MACDUFF”.
CONDITION: Barrels retaining 98% original browned finish, signature crisp. Breeches retaining 25% original casehardened finish to the underside, the remainder faded, engraving crisp. Locks and standing breech with crisp, retaining
70% faded original casehardened finish. The trigger guard with crisp engraving and retaining 65% original blued finish. Trigger plate with 50% original casehardened finish in sheltered areas. Buttplate worn bright on the face, tang
with 30% original blued finish. Stock with minor handling marks, checkering good, carved lion mask well detailed and with little signs of wear. Case in good condition, some exterior handling marks, lid with some cracks along the
grain, interior lining with some staining, label stained and rubbed.
Provenance: The Malcolm King Collection.
Estimate: 2500 - 4000
A Selection of Fine Arms from the Esteemed Collection of Malcolm King
255

BOTH SIDES PICTURED
A Selection of Fine Arms from the Esteemed Collection of Malcolm King
256
LOT 294
Very Fine Engraved Thomas
Elsworth Mortimer 15 Bore Double
Barrel Percussion Sporting Shotgun with
Case and Accessories - Serial no. 5832, 15 Bore gauge,
28 inch bbl., browned/casehardened/blued finish, walnut
stock. Manufactured in circa 1850. With browned Damascus barrels
signed “T.E. MORTIMER EDINBURGH, LATE ST. JAMES ST. LONDON” on the
concave rib. Casehardened border and scroll engraved patent breeches
each with platinum plug. Casehardened border and scroll engraved
standing breech and side locks, the latter each signed “T.E. MORTIMER,
GEORGE ST.” Blued furniture including butt plate with long tang and trigger
guard each with border and scroll engraving. Well figured walnut half
stock with checkered grip and forearm. Original brass
mounted ramrod. In associated oak fitted case lined
in green baize, the lid with Thomas Elsworth Mortimer
printed trade label, and numbered to gun “5865”. With
accessories including leather wrapped Bartram powder
flask, leather shot flask with shield shaped escutcheon
plate to one side, wad punch, oiler, large square glass oil
bottle, turnscrews and two shot chargers.
CONDITION: Very fine with 80% of the rebrowned finish
remaining with some spotting and clear markings. The
breech, locks, and hammers retain approximately 70% of the original casehardened finish with the trigger plate and ramrod
insert having mostly a smooth grey patina. The trigger guard and butt plate retain 50% of their original vibrant blue finish
with most of the finish loss on the butt plate with some areas of discoloration. The refreshed wood is very good with numerous scratches and dings, well defined checkering, and some
discoloration. The case is very fine with several handling scratches and staining on the exterior and some slight tears to the interior. Mechanically excellent.
Provenance: The Malcolm King Collection.
Estimate: 5000 - 8500
LOT 295
Fine Engraved Joseph Harkom & Son, Edinburgh 8 Bore Double Barrel Percussion Duck
Shotgun - Serial no. 1691, 8 Bore gauge, 34 1/4 inch bbl., browned/casehardened/blued finish,
walnut stock. This late production big bore percussion duck gun was manufactured in circa
1873/4. With browned Damascus barrels signed “JOSPEH HARKOM & SON. 32 PRINCES STREET
EDINBURGH” on the concave rib. Border and scroll engraved standing breech and locks, the
latter each signed “HARKOM & SON”, with dolphin carved hammers, and blued trigger guard.
Well figured walnut half stock with checkered grip and forearm.
CONDITION: Barrels retaining 95% rebrowned finish, good Damascus pattern, clear signature.
Breeches a dark patina, clear engraved decoration. Standing breech and locks retaining 40%
faded original casehardened finish, trigger guard with 20% original blued finish mostly to inner
surface. Stock lightly refinished with minor handling marks, and sharp recut checkering. Butt
plate with mostly a grey patina. Mechanically excellent.
Provenance: The Malcolm King Collection.
Estimate: 3000 - 5000
BOTH SIDES PICTURED

A Selection of Fine Arms from the Esteemed Collection of Malcolm King
258
LOT 296
Extremely Fine Engraved R.B. Rodda & Co. 4 Bore Rotary Underlever Double Barrel
Hammer Wildfowling Shotgun - Serial no. 18210, 4 bore gauge, 37 1/2 inch bbl., browned/
gold/casehardened/blued finish, walnut stock. This fabulous large bore duck and goose
gun has browned damascus twist barrels with concave rib signed “R.B. RODDA & CO. GUN
MAKERS TO H.E. THE VICEROY & H.R.H. THE DUKE OF EDINBURGH. LONDON & CALCUTTA” in
gold and with bead front sight, the breech ends each engraved with a band of beadwork
and the breech end of the rib with a spray of scrollwork. Casehardened action with rounded
fences and non-rebounding back action locks, the latter each signed “R.B. RODDA & CO.” in
gold. Border and scroll engraving throughout. Barrels and action struck with London black
powder proof marks. Well figured straight hand stock with checkered grip and forearm, the
underside of the butt with blank silver initial escutcheon.
CONDITION: Barrels retaining 65% apparently original browned finish, gold in excellent
condition, breech end engraving slightly flattened. Action and locks retaining 75% original
bright casehardened finish, engraving clear, gold signatures excellent condition. Stock
refinished, checkering crisp, minor storage and handling bruising. The steel buttplate retains
70% of the darkened original case colors.
Provenance: The Malcolm King Collection.
Estimate: 15000 - 25000

A Selection of Fine Arms from the Esteemed Collection of Malcolm King
259

260
LOT 297
Attractive Engraved .470 Nitro Express Westley Richards & Co. “Drop
Lock” Single Trigger Ejector Double Barrel Rifle with Case - Serial no.
01399, 470 cal., 28 inch solid rib bbl., blue/casehardened finish, walnut stock.
Blued barrels signed “WESTLEY RICHARDS & Co. LONDON” on the smooth
concave rib, “.470 EXPRESS CARTRIDGES” on the right barrel, “75/500 GRS” on
the left barrel, blade front sight with flip up moon and hood, matted quarter
rib with four leaf express sight graduated “50,” “100,” “200,” and “300” and
inlaid with platinum sighting lines, small importer marks, and Birmingham
nitro proofs. Casehardened box lock incorporating Westley Richards’ 1897
patent hand detachable lock mechanism with turned locks respectively
inlaid “L” and “R” in gold, doll’s head rib extension, engraved floral scrollwork,
signed “WESTLEY RICHARDS & Co.” on both sides and “WESTLEY RICHARDS/
PATENT ONE TRIGGER” on top, flip up peep sight mounted on the break lever, extended
tang tapped for sight mounting, Westley Richards patent single trigger with selector of
trigger plate with “L” and “R” in gold, automatic bolted safety with “SAFE” and “BOLTED”
in gold. Nicely figured walnut pistol grip stock with multi-point checkering, horn grip
cap and forearm tip, forearm with engraved hardware, silver oval initial oval engraved
“JFK/III”, stamped “1286” near the toe, straight comb, right handed cheekpiece and
solid Pachmayr Old English recoil pad. Length of pull: 14 1/2 inches; weight:
11 lbs. 11 oz. Comes with a Huey leather bound oak case with “J.F.K./III”
marked initial oval on the outside of the lid, canvas cover signed
“J.F.K./III”, oiler, leather sling, and two-piece cleaning rod
with three attachments.
CONDITION: Very fine. The barrels retain 97% professionally
reapplied blue finish showing some thinning and minor
scratches. The receiver retains 20% original case colors
in and around the protected areas, otherwise faded to a
gray. The remaining surfaces retain 95% blue finish. The
engraving is crisp. The wood is fine with minor handling
marks and some worn checkering. Mechanically excellent.
The case is fine with a short crack on a lid side and some
minor handling/storage marks.
Estimate: 15000 - 25000

Extremely Rare and Significant Charles Lancaster Four-Barreled Over and Under Rifle
A Selection of Fine Arms from the Esteemed Collection of Malcolm King
262
Shivaji Rao Holkar,
Prince of Indore, Eldest
Son of Maharaja Tukoji
Rao Holkar II
LOT 298
Fine & Extremely Rare Engraved Charles Lancaster .500 (Black Powder Express) Four-Barrel Over and
Under Rotary Underlever Hammerless Thorn Patent Oval Bore Rifle with Case made for the Prince
of Indore - Serial no. 5174, 500 Black Powder Express gauge, 28 inch bbl., blued/casehardened finish, walnut
stock. The maker’s records confirm that this extremely rare four barreled rifle was made for the Prince of Indore
in 1886. The senior prince at this time was Shivaji Rao Holkar (born 1828, reigned as Maharaja from June
1886 until January 1903), eldest son of Maharaja Tukoji Rao Holkar II. With blacked barrel group respectively
signed on the upper barrels and upper concave rib “CHARLES LANCASTER. 151. NEW BOND STREET. LONDON”,
“PATENT FOUR BARREL BREECH LOADING HAMMERLESS SMOOTH BORE RIFLE” and “BARRLES (sic) MADE
OF SIR JOSEPH WHITWORTHS FLUID PRESSED STEEL TUBES”, and with bead front sight, block mounted
rear sight with gold inlaid center line and short scroll engraved rear rib with doll’s head extension. Border
engraved casehardened action signed “CHARLES LANCASTER’S PATENT / LONDON” on each side, with upper
tang mounted safety catch with gold inlaid “SAFE” and blued removable firing pin bushings. Double trigger
mechanism comprising larger rear cocking trigger and shorter checkered front firing trigger. Barrels and
action stuck with London black powder proof marks. Figured straight hand stock with raised cheekpiece and
checkered grip and forearm. With brass cornered oak and leather case with accessories, the lid with printed
Charles Lancaster trade label.
CONDITION: Professionally refinished throughout. Barrels have been reblacked, signature clear, some spots
of corrosion marking visible beneath the finish. Action and furniture retain virtually all the renewed case
hardened finish. Replacement stock has been refinished with a small crack coming off the forend shoe, and
some scattered minor blemishes. Case in very good refurbished condition. Mechanically excellent.
Provenance: The Malcolm King Collection.
Estimate: 22500 - 35000

Made for the Prince of Indore
A Selection of Fine Arms from the Esteemed Collection of Malcolm King
263

BOTH SIDES PICTURED
A Selection of Fine Arms from the Esteemed Collection of Malcolm King
264
LOT 299
Fine Panel Game Scene Engraved
John Dickson & Son 18 Bore Single
Barrel Percussion Sporting Rifle with Case -
Serial no. 1316, 18 BORE cal., 33 1/4 inch bbl., browned/
casehardened/blued finish, walnut stock. The maker’s records
confirm that this rifle was completed on March 18, 1852 for a Henry
Davidson Esq. With browned damascus twist octagonal barrel
signed on the top flat “JOHN DICKSON & SON. 60. PRINCES STREET.
EDINBURGH” and fitted with bead front sight and blued rear sight
of one standing and two folding leaves. The barrel is rifled with two
deep grooves for a winged conical bullet. Casehardened breech
with platinum plug engraved with a rosette, inlaid with a platinum
line and engraved with a roped border line and scrollwork.
Barrel struck with London proof marks. Casehardened side lock
with safety catch, signed “JOHN DICKSON & SON”. Casehardened
standing breech and furniture including hinged patch box cover,
and blued pistol grip trigger guard and butt plate. Border and scroll
engraved throughout, the lock with a vignette of a dead stag, the
patch box cover with a standing stag, and the tang of the butt plate
with a stag’s head. Well figured straight hand half stock with raised cheekpiece, checkered grip and
forearm, sling button fitted to the underside of the butt, a corresponding sling eye is on the central
ramrod pipe, and a dark horn cap to the forearm. In oak fitted case lined in tooled pigskin, the lid with John Dickson & Son
printed trade label, and with accessories including brass bullet mold, powder flask, patch punch and pots with turned lids.
CONDITION: Barrel retains 98% original browned finish with some minor muzzle rub. Breech retains 98% of its original
casehardened finish with crisp engraving. Engraving to lock and furniture crisp throughout. The casehardened finish gone
to a dark patina on the lock and standing breech, 90% remaining on the patch box cover. The trigger guard and butt plate
retaining 30% original blued finish, the remainder on the trigger guard faded to plum. Stock reoiled, minor handling marks
to the toe of the butt, crisp checkering. Case in good condition, some external storage marks, lining with some staining and indentations,
accessories generally in good condition. Mechanically excellent.
Provenance: The Malcolm King Collection.
Estimate: 5000 - 8000
BOTH SIDES PICTURED
LOT 300
Fine Engraved E.M. Reilly & Co. 4 Bore Single Barrel Percussion Dangerous
Game Rifle For Belted Ball - NSN, 4 bore cal., 26 1/2 inch bbl., browned/casehardened/blued
finish, walnut stock. With browned octagonal damascus twist barrel signed “E.M. REILLY & CO. LONDON” on
the top flat towards the breech, rifled with two deep grooves to take the belted ball, blued front sight and standing
notched back sight, and casehardened patent breech. Casehardened false breech and side lock, the latter signed “E.M.
REILLY & CO.” Blued and casehardened iron furniture including straight-backed trigger guard with shell finial. Border and scroll
engraved throughout. Figured left hand “roach belly” full stock with raised cheekpiece, and hand forged iron ramrod.
CONDITION: Professionally refinished throughout and retaining virtually all its renewed finish. Barrel and breech each with clear
engraving, some corrosion marking visible beneath the browned finish. Front sight blade missing, base is present. Mechanism only
cocks on the set trigger. Trigger mechanism a later replacement. Expertly restocked, butt with pegged repair to underside.
Provenance: The Malcolm King Collection.
Estimate: 3500 - 5500

BOTH SIDES PICTURED
LOT 301
Fine Engraved James Beattie
& Son 12 Bore Jones Patent Rotary Underlever
Double Barrel Hammer Rifle with Case - Serial no. 3943, 12 Bore
gauge, 28 inch bbl., browned/casehardened/blued finish, walnut stock. With
browned fine damascus twist barrels signed “JAMES BEATTIE & SON. 205. REGENT
ST.T LONDON” on the raised solid rib and with large bead front sight, blued rear sight
of one standing and one folding leaf, the standing sight calibrated for “100” yards,
engraved with sprays of scrollwork around the rear sight and at the breech end of
the rib, the area behind the front sight matted on the rib, and the breech ends of
the barrels each engraved with band of stylised running foliage. Casehardened action with carved
percussion fences and back action locks each with blued safety catch and signed “J. BEATTIE & SON”.
Fine border and scroll engraving throughout, the locks each with differing vignette of a stag. The
barrels and action struck with London black powder proof marks and London nitro reproof marks for
2007. Well figured straight hand stock with checkered grip and forearm. Blued iron mounts including
trigger guard with extended checkered tang forming a pistol grip. In brass cornered oak lined fitted case
with some accessories, the lid with J. Beattie & Co. printed trade label and test target dated 2008.
CONDITION: Barrels expertly rebrowned and retaining virtually all their renewed finish. Engraving
to action and locks very crisp, 20% original casehardened finish remaining in sheltered areas,
remainder a light grey patina. Stock refinished, checkering sharp, occasional slight handling and
storage blemishes. Furniture reblued to a dark matt color. Case associated, relined and refitted to
the rifle, trade label a recent reproduction. Mechanically excellent.
Provenance: The Malcolm King Collection.
Estimate: 6000 - 9000
BOTH SIDES PICTURED
LOT 302
Fine & Rare Engraved
Westley Richards 12 Bore / 16 Bore Double
Barrel “Bar In Wood” Toplever Hammer Cape Rifle
with Case - Serial no. 12547, 12/16 cal., 30 inch bbl., browned/
casehardened/blued finish, walnut stock. Manufactured in circa 1875 as a
pinfire and subsequently converted to center fire, with browned damascus twist
barrels each engraved with a band of running foliage at the breech end. The 12
bore a smooth shot barrel and the 16 bore barrel cut with deep rifling. Raised rib
signed “WESTLEY RICHARDS 170 NEW BOND ST.T LONDON”, engraved “PATENT”
towards the breech end and “WHITWORTH PATENT” ahead of the back sight
comprising four folding leaves graduated from “50” to “200” yards and each with platinum inlaid center
line, bead front sight and doll’s head extension engraved with a shell. Action struck with patent use
number “2510” on the water table and with blued toplever engraved “WESTLEY RICHARDS PATENT”.
Floating non-rebounding side locks each signed “WESTLEY RICHARDS” and with dolphin hammer
and blued safety catch. The action, locks and furniture all with fine border and scroll engraving. Barrels and action struck with
Birmingham black powder proof marks. Well figured “crab joint” pistol grip stock with raised cheekpiece and checkered grip and
forearm, the latter with dark horn tip. The underside of the butt with blank silver initial escutcheon. The stock and barrels with
sling eyes. In brass cornered oak lined leather case with oil bottle, the lid with printed Westley Richards & Co. trade label.
CONDITION: Barrel retaining 80% thinning rebrowned finish, engraving sharp, signatures softened. Locks retaining slight traces
of original casehardened finish. Engraving crisp to the action and locks, slightly flattened to trigger guard. The action and locks have a
mostly light grey patina, the trigger guard and butt plate are more discoloured. Stock has been professionally refinished with sharp checkering and some scattered storage
and handling marks. Crab joint in good condition with small crack along the grain visible to the inside of the forearm. Case has been re-leathered at the ends, straps and
handles expertly replaced. Trade label holed and stained. Mechanically excellent.
Provenance: The Malcolm King Collection.
Estimate: 3500 - 5500
A Selection of Fine Arms from the Esteemed Collection of Malcolm King
265

Engraved Manton & Co. 8 Bore "Dangerous Game" Double Rifle
A Selection of Fine Arms from the Esteemed Collection of Malcolm King
LOT 303
Very Fine Engraved Manton & Co. 8 Bore Rotary Underlever Double Barrel Dangerous
Game Hammer Rifle with Case - Serial no. 5770, 8 Bore gauge, 24 inch bbl., blued/
casehardened finish, walnut stock. With blued barrels with broad raised matted rib with bead
front sight, rear sight of one standing and two folding leaves each with platinum inlaid center
lines and graduated from “50” to “150” yards, doll’s head extension engraved with a shell, and
respectively signed on the barrels “MANTON & CO. GUN MAKERS TO HRH THE” and “DUKE OF
EDINBURGH K.G. LONDON & CALCUTTA.”. Casehardened action with carved percussion fences,
rebounding back action locks, the right lock signed “MANTON & CO.”, underlever and furniture.
Double border line and light scroll engraving throughout. Figured pistol grip stock with raised
cheekpiece, checkered grip and forearm. Barrels and action struck with London black powder
proof marks. With brass cornered oak and leather case with accessories, the lid with Manton &
Co. printed trade labels.
CONDITION: Professionally refinished throughout. Barrels reblued, file cut matting on rib
sharp, signatures clear, occasional blemish visible beneath bluing. Bright casehardened
colors, some scattered pock marks visible beneath finish, engraving sharp. Stock with
numerous surface blemishes and light scratches. Case in very good condition, of recent
manufacture. Mechanically excellent.
Provenance: The Malcolm King Collection.
Estimate: 18000 - 25000
266

A Selection of Fine Arms from the Esteemed Collection of Malcolm King
267

BOTH SIDES PICTURED
A Selection of Fine Arms from the Esteemed Collection of Malcolm King
268
LOT 304
Fine Engraved New York Retailed William
Moore of London 8 Bore Double Barrel Percussion
Duck Shotgun - Serial no. 34, 8 Bore gauge, 36 3/8 inch bbl., browned/
casehardened finish, walnut stock. Manufactured in circa 1840 by the renowned
London gunmaker William Moore who had been apprenticed to the great Joseph
Manton, this gun was imported into New York by Henry Tomes before being retailed on Long
Island by Stephen Taber. With browned twist barrels signed “STEPHEN TABER, ROSLYN L.I. BEST
LAMINATED STEEL” on the concave rib and with silver front sight. Shaped casehardened border and scroll
engraved patent breeches each with pierced platinum plug and inlaid with two gold lines on the rib section.
Border engraved casehardened standing breech, side locks and furniture including buttplate and trigger guard.
The locks are each signed “WILLIAM MOORE/MAKER. LONDON” and the trigger guard is engraved with the serial
number on the trigger bow and “IMPORTED BY HENRY TOMES, NEW YORK” on the rear tang. Well figured walnut
straight hand half stock with checkered grip and forearm, the underside of the butt with blank gold oval initial
escutcheon. The barrels are secured by two barrel keys and with brass mounted ramrod.
CONDITION: Barrels retaining nearly all of an older thinning rebrowned finish, signature clear. Breeches retaining
50% original casehardened finish. Locks retaining 75% original casehardened finish. Furniture with some traces
of original finish in more sheltered areas. Stock with some handling marks, well defined checkering, nice figuring.
Mechanically excellent.
Provenance: The Malcolm King Collection.
Estimate: 4000 - 6000
BOTH SIDES PICTURED
LOT 305
Fine & Rare A.G. Genez, New York Retailed French 8 Bore
Double Barrel Lefaucheux Patent Underlever Hammer Duck
Shotgun - Serial no. 22239, 8 Bore gauge, 38 1/4 inch bbl., browned/
casehardened finish, walnut stock. This rare pinfire big bore gun was made
in France and retailed in New York by the firm of A.G. Genez and is dated
“1869”. With browned twist barrels signed “A.G. GENEZ. MAKER. N.Y.” on the
concave rib and “LEOPOLD BERNARD A PARIS” on the underside. Bernard
is regarded as one of the finest French barrel makers of the 19th century.
Casehardened action and back action locks. Figured walnut butt with
checkered grip. Provenance: Thomas R. Prudente Collection, Christie’s, London, December 17, 2015, lot 129.
CONDITION: Barrels retaining 95% original thinning browned finish, signature crisp. Action and locks retaining 60% fading original casehardened finish, butt
plate bright. Stock well figured with some light handling marks, checkering well defined. Mechanically excellent.
Provenance: The Malcolm King Collection.
Estimate: 4000 - 6000

BOTH SIDES PICTURED
LOT 306
Fine & Rare Panel Game Scene Engraved William Moore & Grey 8 Bore Double Barrel Jones Patent
Rotary Underlever Hammer Wildfowling Shotgun with Extra Set of Barrels - Serial no. 4375,
8 Bore gauge, 36 inch bbl., browned/casehardened/blued finish, walnut stock. Built in circa
1886 by the highly regarded London gunmakers William Moore & Grey. Both William
Moore and William Parker Grey, the founders of the firm, had worked for Joseph
Manton before going their separate ways. William Moore became established as
a gunmaker of great note, becoming Gunmaker-in-Ordinary to King William IV,
before reuniting with Grey in 1847 and forming William Moore & William Grey
Gunmakers. The company moved to the 43 Old Bond Street address in 1854 and
went through names changes until settling on William Moore & Grey in 1873. The
firm survived until 1908 when it was acquired by Cogswell & Harrison. With two sets
of browned damascus barrels respectively numbered “1” and “2” on the extractor
and each engraved with a band of stylised foliage at the breech end, with concave rib
engraved with a spray of scrollwork at the breech end and signed “WILLIAM MOORE & GREY, 43, OLD
BOND STREET. LONDON. W.” Casehardened action with carved percussion fences and rebounding locks each signed “Wm. MOORE &
GREY”. Fine scroll engraving throughout with panel game scenes involving wildfowl and hounds. Well figured walnut pistol grip stock
with rubber recoil pad, checkered grip and forearm, and gold oval initial escutcheon to the underside of the butt engraved with a
monogram. The underside of the barrels and watertable with London “Not For Ball” black powder proof marks.
CONDITION: Both sets of barrels retaining 98% rebrowned finish with fine, attractive twist pattern and
good color, clear signature. Action and locks with some dried oil, no finish beyond extremely slight
traces on outer surfaces, some original faded casehardened finish to water table. Engraving crisp
and fine throughout. Nice figure stock with handling marks, well defined “basket weave” checkering,
forearm wood probably a working replacement. Mechanically excellent.
Provenance: The Malcolm King Collection.
Estimate: 4000 - 6500
LOT 307
Fine Panel Game Scene Engraved G.E. Lewis 8 Bore Double Barrel Jones Patent
Rotary Underlever Hammer Duck Shotgun - Serial no. 7632, 8 Bore gauge, 37 inch bbl.,
browned/casehardened finish, walnut stock. Manufactured in circa 1887 by the firm of
G.E. Lewis, known colloquially as “Goose Eliminator” Lewis famed for his excellent
wildfowling guns. With browned damascus barrels each engraved with a band
of stylised foliage at the breech end and with concave rib signed “G.E.
LEWIS BIRMINGHAM NO. 7639”. Border and scroll engraved action
with carved percussion fences. Rebounding back action locks each
signed “G.E. LEWIS” and engraved with border and scrollwork framing
a scene of wildfowl in flight. Furniture including blued trigger guard.
Figured walnut pistol grip stock with checkered grip and forearm, the
underside of the butt with blank silver oval initial escutcheon. The
barrels with nitro reproof marks.
CONDITION: Barrels retaining 98% rebrowned finish, finish beginning
to thin in places, engraving clear, small amount of muzzle rub. Locks with
light grey patina with some old oil staining throughout, engraving clear. Trigger guard reblued. Stock with some light handling marks, well defined
checkering. Mechanically excellent.
Provenance: The Malcolm King Collection.
Estimate: 4000 - 6000
BOTH SIDES PICTURED
A Selection of Fine Arms from the Esteemed Collection of Malcolm King
269

BOTH SIDES PICTURED
LOT 308
Big Game Scene Engraved G.E. Lewis .500
Black Powder Express Damascus Back
Action Hammer Double Rifle with Case - Serial no. 1809, 500 Black Powder Express cal., 29 1/4
inch solid rib bbl., brown/casehardened finish, walnut stock. Browned twist Damascus steel dovetail
lump barrels with beaded blade front and three leaf (one standing, two folding) express notch rear sights on the matte rib marked “G.E.
LEWIS, TREBLE GRIP HONORS PARIS 1878 SYDNEY 1880 MELBOURNE 1881 CALCUTTA 1884/32 & 33 LOWER LOVEDAY St. BIRMINGHAM
No. 7110 500 EXPRESS” with older Birmingham proofs on the barrel tubes, Birmingham re-proofs on the flats, and a single large extractor.
Casehardened round body action with sculpted percussion fences, Birmingham proofs on the water table, doll’s head rib extension
with hidden third fastener. The action features near full coverage fine scroll engraving, and the locks are engraved with matching
scroll “G.E. LEWIS” maker’s marks, a tiger on the right lock, bear on the left, and a full maned lion is on the trigger guard. The trigger
guard features a checkered pistol grip extension. Checkered forearm and straight grip buttstock with engraved fittings, blank silver
initial shield on the comb, and lightly engraved casehardened buttplate. Includes a leather bound takedown case with green felt
interior and vintage reloading tools. Length of pull is 14 1/4 inches.
CONDITION: Fine with 75% period refurbished brown finish remaining on the barrels, faintly visible Damascus pattern, well defined
rib markings, scattered light surface pitting, and some darker spotting. The action and locks have 70% refurbished case colors with the
balance silvered out to a mild gray patina, slightly softened engraving, and some traces of light surface pitting. The refinished wood is also
fine with attractive complex figure, scattered small dings and scratches, some light chips on the forearm edges, and traces of case colors on
the buttplate. Mechanically excellent. Case is fine with exterior dings and scuffs, storage marks, and relined interior.
Estimate: 2250 - 3750
BOTH SIDES PICTURED
270
LOT 309
Factory Engraved W.J.
Jeffery & Co. .577 Express
Back Action Hammer
Double Rifle
with Case and
Ammunition
- Serial no.
8712, 577 cal.,
25 inch solid
rib bbl., blue/
casehardened finish, walnut stock. Blue
steel chopper lump barrels with beaded blade front
and three leaf (one standing, two folding) express notch rear sights, with London
proofs marked “577 EX” and “CORDITE 75 GR BALL 650 GR MAX”. The action has a doll’s
head rib extension third fastener, sculpted percussion fences, knurled lightly engraved
hammers, knurled side lever, and dual triggers. The action and locks are engraved with fine
English scroll “W.J. JEFFERY & Co.” banners on the locks, and matching engraved trigger guard and
tangs. Checkered forearm and pistol grip buttstock with engraved steel grip cap, raised cheekpiece, and vented recoil pad. Includes
leather bound takedown case with Charles Hellis & Sons interior trade label, 25 rounds of .577 3” nitro express ammunition, and bore rod.
CONDITION: Fine. The barrels have 95% refinished blue with markings mostly obliterated, some spots of visible thinning, and some small scattered nicks and dings. The action and
locks have an overall bright appearance with well defined engraving and markings, evidence of cleaning, and refinished hammers, trigger guard, and lever. The forearm is good with
mostly well defined checkering, dings and bruises and a repair visible on the right side. The replacement buttstock is fine with sharp checkering, and some small dings. Mechanically
excellent. Case is fair with visible corner and edge wear, patina on the fittings, and visible damage to the lining.
Estimate: 3750 - 5500

LOT 310
Factory Engraved Armas Garbi Model 103A Side Lock Ejector Side
by Side 20 Gauge Shotgun - Serial no. 27-03-088-01, 20 gauge, 28 inch solid rib bbl., blue/coin
finish, walnut stock. Blue steel dovetail lump barrels with single nickel bead sight on the matte, concave rib,
barrels marked “ARMAS GARBI SPAIN/WILLIAM LARKIN MOORE SCOTTSDALE, AZ. MOD. 103A”, 2 3/4 inch chambers with automatic
ejectors, standard proofs on the flats, and improved cylinder/modified chokes. Bright coin finished action and hand detachable lock plates
with bushed firing pins, dual (front is articulated) triggers, and manual sliding tang safety. The action and locks have full coverage fine flowing scroll
engraving with rosette bouquets, and matching engraved trigger guard and tangs. Highly figured checkered splinter forearm and straight grip stock with Anson latch, engraved
fittings, and solid rubber Eliminator recoil pad. Bore and stock measurements are: chambers proofed and measured at 2 3/4 inches (70mm); bores proofed at 15.9 mm (.626) and measured at .623/.623;
chokes .010/.014; drop at comb 1 1/2 inches; drop at heel 2 1/8 inches; length of pull 14 1/8 inches; weight 5 lbs. 15 oz.
CONDITION: Excellent with 95% bright original blue finish on the barrels, some mild forearm wear, and some small bright spots. The action and locks have crisp engraving and some light handling marks.
The wood is very good with small scratches and dings scattered throughout, attractive grain, and sharp checkering. Mechanically excellent.
Estimate: 5000 - 8000
LOT 311
Cased Engraved Poli/Kevin’s
Plantation Collection Side by Side 20 Gauge Shotgun - Serial no. 5210, 20 gauge,
28 inch solid rib bbl., blue/coin finish, highly figured checkered walnut stock. Blue steel barrels with single steel
bead sight, 2 3/4 inch chambers with automatic ejectors, left barrel marked “Made in Italy for Kevin’s” in fancy script,
standard Italian proofs on the flats, and cylinder/modified chokes. Bright coin finished action and false side plates, single non-selective
trigger, and automatic sliding tang safety. The action and plates have full coverage broad leaf scroll engraving textured fences, matching engraved,
double rolled trigger guard, and matching engraved tangs. Attractively figured checkered walnut forearm and straight grip stock with Anson style latch, engraved fittings, and solid rubber
recoil pad. Includes Kevin’s takedown case and extra checkered walnut buttplate. Stock measurements are: drop at comb 1 3/8 inches; drop at heel 2 3/8 inches; length of pull 15 inches.
CONDITION: Excellent with 98% bright original blue finish remaining, some light forearm marks, and small scratch on underside of barrel. The action and plates are bright with crisp detailed engraving. The
wood is very good with highly attractive figure, sharp checkering, and visible cracking at the tip of the upper tang. Mechanically excellent. Case is very good with some wear on the leather corner and edge protectors.
Estimate: 2500 - 4500
LOT 312
Factory Engraved Gebruder Merkel Model 147EL 20 Gauge Side by Side
Shotgun with Case - Serial no. 386069, 20 gauge, 28 inch solid rib bbl., blue/coin finish, highly figured checkered
walnut stock. Single brass bead sight on the matte rib, chambers marked and measured at 3 inches with automatic
ejectors, “GSI” importer marking on left barrel, standard German proofs on the flats, and improved cylinder/modified chokes. Bright coin
finished, scalloped box lock action with side clips, rib extension third fastener, cocking indicators, single trigger with selector, and automatic sliding
tang safety. The action is engraved with crisp flowing scroll patterns surrounding game bird scenes of quail on the right and pheasants on the left. Highly figured, checkered
walnut forearm and straight grip stock with Merkel serrated plastic buttplate. Includes cloth and leather takedown case, snap caps, and oiler. Stock measurements are: drop at comb 1 5/8 inches;
drop at heel 2 5/8 inches; length of pull 14 3/8 inches.
CONDITION: Excellent overall with 99% plus original finish, crisp engraving, attractive, dark figure and sharp checkering on the wood, and some scattered light handling marks. Mechanically excellent.
Case is excellent.
Estimate: 3000 - 5000
LOT 313
Engraved Gebruder Merkel Model 8-2 Side by Side 20 Gauge
Shotgun with Box - Serial no. 648252, 20 gauge, 26 3/4 inch solid rib
bbl., blue/casehardened finish, walnut stock. Single brass bead sight
on the matte, lightly concaved rib barrels with 3 inch chambers, single
extractor, standard markings, light engraving around the breech ends,
and cylinder/improved cylinder chokes. Casehardened box lock action with crossbolt third fastener, cocking indicators,
single trigger with selector, and automatic tang safety. Checkered forearm and pistol grip stock with engraved fittings
and serrated Merkel buttplate. With original box. Length of pull is 14 1/4 inches.
CONDITION: Excellent overall with 99% original blue and vibrant casehardened finishes, sharp checkering, scattered light handling marks mostly on the buttstock. Mechanically
excellent. Box is very good with corner and edge wear.
Estimate: 1400 - 2250
LOT 314
Engraved Gebruder Merkel Model 47E Side by Side Shotgun with Box - Serial no. 788624,
12 gauge, 26 3/4 inch round bbl., blue/casehardened finish, walnut stock. Blue steel dovetail lump barrels with single
white bead sight on the matte rib, 2 3/4 inch chambers, automatic ejectors, full/full chokes, and standard German
proofs on the flats. Casehardened box lock action with cross bolt third fastener, cocking indicators, dual triggers,
and automatic sliding tang safety. Checkered walnut pistol grip stock and forearm with engraved fittings, black grip
cap, raised cheekpiece, and checkered Suhl buttplate. With correct model (serial number illegible) factory box. Stock
measurements are: drop at comb 1 9/16 inches; drop at heel 2 3/4 inches; length of pull 14 1/2 inches.
CONDITION: Excellent with 99% original blue and vibrant casehardened finishes, light scattered handling marks, and some light marks on the underside of the receiver from the forearm shoe and some scratches
on the upper tang from the barrel break lever. The wood is also excellent with rich color, sharp checkering, and just a few small dings. Mechanically excellent. Box is good with corner and edge wear throughout
and some tears.
Estimate: 900 - 1400
271

272
LOT 315
Cased Factory
Engraved J. Purdey &
Sons Best Quality Self
Opening Side Lock
Ejector Side by Side
20 Gauge Shotgun
Two Barrel Set - Serial
no. 29060, 20 gauge, 28
inch solid rib bbl., blue/
casehardened finish,
highly figured checkered
walnut stock. Blue steel
chopper lump barrels with chambers
marked and measured at 2 3/4 inches,
single steel bead sight on the matte
rib, barrels marked “J. PURDEY & SONS/
AUDLEY HOUSE. SOUTH AUDLEY
STREET. LONDON. ENGLAND”, and
London proofs on the flats dated 1988.
Casehardened action and lock plates
with standard proofs on the water
table, bushed firing pins, cocking
indicators, nitre blue screws and pins,
“J. PURDEY & SONS” marked on both
locks, single non-selective trigger, and
automatic sliding tang safety. The action and locks feature full coverage Purdey
Best Quality rose and scroll engraving with gold inlaid “SAFE” marking, right hand rolled trigger guard, and
matching engraved tangs. Highly figured checkered beavertail forearm and straight grip stock with Anson
latch, engraved fittings, gold initial oval inscribed “R.M.M.” and checkered bare butt. The second barrel set is
also 28 inches, numbered to match the action with 2 3/4 inch chambers, and a gold inlaid star on the rib to
distinguish between the two. Includes red leather bound takedown case
with Purdey interior trade label, oiler, snap caps, and cleaning tools. Bore
and stock measurements are: Set 1; bore proofed and measured at .614;
chokes .008/.008; Set 2; bore proofed and measured at .614; chokes
.014/.032; drop at comb 1 3/8 inches; drop at heel 1 7/8
inches; length of pull 14 3/8 inches; weight 6 lbs. 2 oz.
CONDITION: Excellent with 99% bright original
blue finish and light handling marks. The
action and locks have 99% vibrant original
case colors with very crisp engraving. The
wood is also excellent with crisp checkering
and just a few small dings. Mechanically
excellent. Case is very good with light corner
and edge wear. Extra barrel is excellent with
99% original blue finish.
Estimate: 27500 - 42500

LOT 316
Factory Engraved A. Piotti Signed
Piotti 20 Gauge Side Lock Side by Side
Shotgun with Case - Serial no. 7714, 20 gauge, 27 inch solid rib
bbl., blue/bright coin finish, walnut stock. Manufactured in 1981. Blue steel chopper lump barrels with
single steel bead sight on the concave rib marked “FLLI PIOTTI GARDONE VT.” 2 3/4 inch chambers with automatic ejectors, light engraving around the breech,
and improved cylinder/improved modified chokes. Bright coin finished action and hand detachable lock plates, automatic sliding tang safety, and finely
checkered single, non-selective trigger. The action and locks have full coverage flowing scroll engraving, maker’s marks on each lock, matching engraved tangs
and rolled (right hand) trigger guard, and trigger plate signed “A. PIOTTI” to the right of the trigger guard. Attractively figured splinter forearm and straight grip
stock with Anson latch, engraved fittings, silver initial oval engraved “J.P.D.” and rubber recoil pad. With leather bound takedown case with Piotti interior label,
and three-piece wood cleaning rod. Bore and stock measurements are: chambers proofed and measured at 2 3/4 inches; bores proofed at 15.9 mm (.626) and
measured at .626/.625; drop at comb 1 5/16 inches; drop at heel 2 1/4 inches; length of pull 15 inches.
CONDITION: Excellent with 98% bright original blue and coin finish, sharp engraving, some minor wear under the forearm, and light handling marks. The wood
is very good crisp checkering, visible dings and scratches mostly on the buttstock, and wear on the pad. Mechanically excellent. Case is good with scuffs and
scratches throughout the exterior.
Estimate: 14000 - 22500
273

274
LOT 317
Master Engraved Gianfranco
Pedersoli Signed Abbiatico & Salvinelli Venus
Grade .410 Bore Side Lock Side by Side Shotgun Two
Barrel Set with Case - Serial no. 238, 410 gauge, 26 inch
solid rib bbl., blue/coin finish, walnut stock. The barrels
feature single bead sights on the matte ribs with 3 inch
chambers, automatic ejectors, cylinder/cylinder chokes,
and standard Italian proofs on the flats. The coin finished
action features bushed firing pins, single non-selective
trigger, and tang mounted manual sliding safety. The
action and lock plates feature deeply cut oak leaf and
scroll borders surrounding highly detailed American
bald eagle scenes from American wildlife painter Guy
Coheleach. The scenes are engraved in the finely detailed
bulino style with a perched eagle on the left, an eagle
landing in the branches on the right, and another
perched eagle on the underside. The underside is
marked “1 Guy Coheleach” in gold inlaid script and the
trigger plate is signed “G.F. Pedersoli Inc.” for Italian Master Engraver Gianfranco Pedersoli.
Nicely figured, checkered forearm with Anson latch, gold inlaid A&S crest on
the underside, and straight grip stock with tear drop accents behind the
locks, gold inlaid script “GC” on the underside, and checkered bare butt.
The second barrel set is 26 inches long with matching serial number and
markings, 3 inch chambers, gold inlaid “2” at the breech, and modified/full
chokes. Includes factory leather bound takedown case with three ebony
handled screw drivers, nickel oil bottle, three-piece wood cleaning rod, and
cleaning rod heads. Stock measurements are: drop at comb 1 1/2 inches;
drop at heel 2 1/16 inches; length of pull 14 1/4 inches.
CONDITION: Very good the first barrel set has 99% original blue finish with
some scattered light handling marks and some light oxidation visible on
the bright breech ends. The action and locks have 65% original bright
coin finish with the balance showing a thin layer of brown surface
oxidation, well defined engraving, and a few darker spots. The wood
is very good with crisp checkering, some small scattered dings, part
of the gold inlaid “GC” absent, and some mild patina on the forearm
shoe. Mechanically excellent. The second barrel set shows some rough
oxidation along the underside of the rib, nearer the muzzle. Case is very
good with exterior scuffs and dings, and some mild
interior discoloration.
Estimate: 14000 - 22500

BOTH SIDES
PICTURED
LOT 318
Master Engraved Gold Inlaid Angelo
Bee Signed Belgian Side by Side 20 Gauge Shotgun - Serial
no. 383, 20 gauge, 27 5/8 inch solid rib bbl., blue/coin finish,
walnut stock. Blue steel dovetail lump barrels with dual white bead sights on the concave,
matte rib, barrels marked “MADE IN BELGIUM - LIEGE/F.N.” and “A. BEE CHATS. CAL. 20/20GA.
SHELLS 2 3/4”, chambers measured at 2 3/4 inches with automatic ejectors, gold inlaid bands at the
muzzle and breech, improved cylinder/full chokes,
and wedges of fine scroll engraving and precious metal inlaid flowers at the breech. Bright coin
finished scalloped box lock action with dual gold washed triggers, decorative pierced through
break lever, and automatic sliding tang safety. The action features full coverage engraving with
relief chiselled yellow and rose gold inlaid floral blossoms on the fences, and game scenes on the
sides of ducks on the right, rabbits on the left, quail on the underside, and a single quail on the
trigger guard. Each bird or rabbit is rendered in fine gold inlay and all are set against highly detailed
backgrounds. The trigger plate is signed “ABEE” under a gold inlaid bee just to the right of the trigger guard. Attractively
figured, checkered walnut beavertail forearm and straight grip stock with beaded borders, engraved fittings, Anson style latch,
carved tear drop accents, and skip-line checkered bare butt. Includes Beretta takedown case.
CONDITION: Excellent with 98% original blue finish, some scattered surface scratches, sharp engraving, and some small forearm marks on the underside of the barrels. The
action has sharp engraving, complete gold inlays, and some very light edge wear on the front trigger. The wood is also excellent with crisp checkering, and some small scattered dings and bruises.
Mechanically excellent. Case is very good.
Estimate: 4250 - 6500
BOTH SIDES
PICTURED
LOT 319
Factory Engraved E.J. Churchill XXV Side Lock Ejector Side by Side Shotgun with Case - Serial no. 6215, 12
gauge, 25 inch solid rib bbl., blue/coin finish, walnut stock. Manufactured between 1925 and 1954. Blue steel chopper
lump barrels with single white bead sight on the matte Churchill rib, barrels marked “E.J. CHURCHILL (GUNMAKERS) Ltd./
ORANGE St. GUNWORKS LEICESTER SQUARE LONDON” on the right and left respectively, chambers proved at 2 1/2 inches and
measured at 2 3/4 inches, automatic ejectors, improved cylinder/full chokes, and standard London proof house markings front the 1925 to 1954 period. The breech end of the rib is marked with
a gold inlaid “XXV”. Coin gray finished action and lock plates with dual triggers and automatic sliding tang safety. The action and locks feature full coverage, very fine leafy scroll engraving, “E.J.
CHURCHILL” marked on both locks, gold inlaid “SAFE” on the upper tang, gold inlaid “crown” on the underside of the action, and matching proofs and serial numbers. Checkered walnut straight grip
stock and splinter forearm with Anson latch, engraved fittings, tear drop carved accents at the wrist, and skip-line checkered rosewood buttplate. Includes leather bound takedown case with E.J.
Churchill interior label exterior of the lid marked “R.B.S.” brass fittings, nickel oiler, and set of snap caps. Barrel and stock measurements are: bore diameter at 9 inches from breech proved at 12 (.729) and
measured at .732/.733; minimum wall thickness .028/.027; choke constriction .011/.038 ; drop at comb 1 7/16 inches; drop at heel 1 13/16 inches; length of pull 14 1/8 inches; weight 6 lbs. 1 oz.
CONDITION: Very fine. The barrels have 95% plus professionally refurbished blue finish, some visible light pitting under the finish, well defined markings, lengthened chambers and some mild brown patina on the under rib. The
locks and action have crisp engraving, and mild cleaning marks. The refurbished wood is fine with lightly worn, mostly crisp checkering, very small repair at the tip of the lower tang, faint hairline cracks at the lock tails, a few small
dings, and some light chipping on the forend. Mechanically excellent. Case is about good with small scuffs and scratches overall, dark patina on the fittings, and interior wear and staining.
Estimate: 4000 - 7000
275

Outstanding Master Engraved & Gold Inlaid T.L. Wallace Signed Jerry Fisher & Dave Talley Custom Rifle
LOT 320
Master Engraved Gold Inlaid
T.L. Wallace Signed Foundation
for the North American Wild
Sheep Jerry Fisher & Dave Talley
Custom Bolt Action Rifle with
Scope and Case - Serial no. 572,
270 Win cal., 22 inch round bbl.,
blue/coin finish, walnut stock. Built
on a Mauser type action by Master
Gunsmith Dave Talley and stocked by
Master Stockmaker Jerry Fisher specifically for the Foundation for North
American Wild Sheep. Features a beaded blade front sight with engraved
and gold inlaid ramp and hood, engraved and gold inlaid center band
with sling swivel eye, “J. Fisher D. Talley” on top of the barrel in fine script, engraved and gold inlaid raised quarter rib with two leaf (one standing, one folding) express notch rear sight,
and gold inlaid “FNAWS” script marking on top of the rib at the breech. The action has full coverage tight American style scroll engraving with gold inlaid line borders, matching engraved
and gold inlaid scope rings with a Leupold M8-4X. The underside of the receiver is lightly inscribed “DAVE TALLEY/WYO 1987”. The trigger guard assembly and floorplate are a contrasting
coin gray and feature matching scroll engraving with a gold inlaid scene of three bighorn sheep at the center of the floorplate, and the engraver’s signature “T.L. WALLACE” just to the rear
of the hinge. The bolt body is brilliantly engine turned with matching engraving and gold inlaid borders on the shroud and knurled handle. With an attractively figured, checkered pistol
grip stock with ebony forend cap, engraved and gold inlaid grip cap, raised cheekpiece, blank initial oval, and highly engraved steel buttplate with a standing bighorn sheep surrounded
by flowing leafy scroll and gold inlaid line borders. Includes a leather bound hard wood case with leather sling, two turnscrews, brass oil bottle, and ebony handled cleaning rod.
CONDITION: Excellent with 99% bright original polished blue finish remaining, sharp engraving, complete gold inlays, some light cycling marks on the extractor, and mostly light handling
marks. The stock is also excellent with sharp checkering, some small scattered dings, and some visible small scratches on the left side ahead of the wrist. Mechanically excellent. Scope is
excellent with clear optics. Case is very good with some exterior scuffs and mild patina on the fittings. The accessories are also very good with visible patina on the brass.
Estimate: 12000 - 18000
276

LOT 321
Fabulous Cased, Wallace & Swartley
Signed, Relief Engraved and Gold Inlaid
Griffin & Howe Custom Mauser Bolt
Action Rifle Safari Club International
25th Anniversary Show/Auction Gun
with Zeiss Scope and Accessories - Serial
no. 2800, 416 Rigby cal., 25 inch round
bbl., blue finish, checkered maple stock.
The fantastically embellished custom rifle
was manufactured by the world famous
firm of Griffin & Howe for the Safari Club
International’s 25th anniversary convention.
The rifle features a banded, hooded, ramped
beaded blade front sight with deeply cut vine scroll
engraving starting at the muzzle and terminating in
a wedge just behind the front sight ramp, gold inlaid
muzzle band, and matching engraved and gold inlaid
scroll on the front sight hood. The center point of
the barrel features another large flourish of deeply
cut scroll engraving with brilliant gold inlaid leaf and
floral accents. The top of the barrel is marked “No.
2800 GRIFFIN & HOWE INC. NEW YORK” between the
central band and raised quarter rib. The quarter rib
has yet more matching engraving with a three leaf
(one standing, two folding) express notch rear sight
graduated from 100 to 300 yards with gold inlaid
markings and center lines. The rear portion of the
rib is marked “416 RIGBY S.C.I.” in gold inlay between
the breech and rear sight. The single square bridge
action is fitted with engraved scope bases, matching
engraved and gold inlaid rings, and a Carl Zeiss
Diavari-Z 1.25-4x24 scope. The receiver ring is engraved
with fine scroll surrounding matching relief chiseled
gold inlaid cape buffalo heads on either side, the bolt
and extractor have been brilliantly engine turned and
the Oberndorf factory markings have been inlaid with
gold. The bolt handle and shroud have been engraved
with matching leafy scroll and feature matching scroll
and floral gold inlays. The floorplate is engraved with
contrasting broad leaf scroll with gold inlaid leaves at
the corners and a finely detailed scene of three cape
buffalo at the center rendered in fine relief carved gold
inlay with a gold inlaid laurel border and the engravers’
signatures on the front bevel “TERRY WALLACE &
ROBERT SWARTLEY.” The trigger guard is engraved to
match with a small gold inlaid cape buffalo skull. Fitted
with a highly attractive tiger stripe red maple pistol
grip stock with multi-point checkering, ebony forend
cap, engraved and gold inlaid grip cap, raised
cheekpiece, and full engraved and checkered steel
buttplate with a gold inlaid cape buffalo standing
over “S.C.I./25/ANNIVERSARY” also inlaid in gold.
Includes a Galco (numbered “2800” to match the
gun) Griffin & Howe leather bound hardwood case
with green suede fitted interior with compartments
for the rifle, bolt, and scope, leather sling, leather lens caps
for the scope, three-piece cleaning rod, ebony snap cap, 10
rounds (five soft point, five FMJ) .416 Rigby ammunition with
matching “SCI BELL 25TH/416 RIGBY” headstamps, and Griffin
& Howe knife with Damascus steel 4 1/2 inch drop point blade and matching striped maple handle. Terry Wallace began engraving full time in 1984,
after studying under master engraver Robert Swartley, one of the founders of the Firearms Engravers Guild of America. Together they teamed up
with Griffin & Howe to create this masterpiece for the 25th anniversary of Safari Club International, one of the premier conservation organizations on
the planet.
CONDITION:
Excellent overall
with 99% of the
bright Griffin &
Howe blue finish
remaining, some
scattered light
handling marks,
sharp engraving,
and complete gold
inlays. The stock
is also excellent
with sharp checkering, some small scattered
dings, and some small scratches visible on the
left side ahead of the wrist. Mechanically excellent. Scope is excellent with clear optics. Case is very good with visible scuffs
and scratches on the exterior. Accessories are very good with visible storage patina on the brass components including the
ammunition. This is an opportunity to own an absolutely stunning big game bolt rifle from a milestone SCI Convention!
Estimate: 9500 - 16000
277

278
LOT 322
Fabulous Cased John Rigby & Co. Master
Engraved Tim George Signed Mauser Bolt
Action Rifle 2002 Safari Club International
Show Gun in .500 Jeffery with Scopes and
Accessories - Serial no. SCI2002, 500 Jeffery cal.,
23 3/4 inch round bbl., blue finish, highly figured
checkered walnut stock. Manufactured and lavishly
embellished specifically for the 2002 Safari Club
International convention. This incredibly handsome
John Rigby & Co. double square bridge Mauser
features a ramped beaded blade front with flip
up hood and flip up moon bead sight, engraved and
gold inlaid mid barrel band with sling swivel, gold
inlaid “John Rigby & Co.” maker’s mark with “Paso
Robles, CA” engraved below, three leaf (one standing,
two folding) express notch rear sight graduated from
50 to 150 with gold inlaid markings and center lines
on a raised rib with gold inlaid caliber marking, and
deep cut scroll engraving and fine gold inlaid scroll
at the breech. The double square bridge action has
integral swivel type scope bases and is signed “ENGRAVED BY/T. GEORGE 02”. Master Engraver Tim George
apprenticed with Colt Factory Master Engraver Ken Hurst for four years before venturing out on his own,
and in 1990 earned his Masters status from the Firearms Engraving Guild of America. The top of the
receiver has full coverage, broad, sweeping scroll designs with fine gold inlaid borders, and flourishes
of gold inlaid scroll in the corners. The bright finished floorplate has an oval of matching scroll patterns
surrounding a highly detailed bulino engraved and gold inlaid African bull elephant. The trigger guard
is engraved to match with a blank gold inlaid initial oval at the center. The bolt shroud features a gold
inlaid safety marking and is adorned with a gold inlaid Rigby “RR” logo on top. The bolt handle knob has
a combination of matching scroll engraving and fine knurling. Mounted on a heavyweight checkered
walnut pistol grip stock with sharp multi-point checkering, ebony forend cap, engraved reinforcing bolt,
gold inlaid blue steel skeleton grip cap, raised shadowline cheekpiece, and leather wrapped recoil pad.
Includes a leather bound Huey storage case (serial number 1244) with printed Rigby interior trade label
which contains the following accessories: Leupold 1.5-5x illuminated reticle scope; Leupold LPS 1.5-6x42 scope; two ebony
handled London pattern turnscrews; ebony handled brush; ebony handled three-piece brass cleaning rod, and brass oil bottle and grease pot.
CONDITION: Fantastic, near new in case with only scattered light handling marks, some very light cycling marks on the extractor, sharp checkering and just a
few insignificant small dings on the stock. Case is excellent with some scattered exterior dings and scuffs. Scopes are excellent with clear optics. Accessories are
excellent overall. A breath taking example of the modern gunmaker’s craft!
Estimate: 15000 - 25000

BOTH SIDES PICTURED
LOT 323
Outstanding Triple Signed Master Factory Engraved Browning Olympian Grade Bolt Action Rifle with
Case - Serial no. 62406L71, 7 mm Rem Magnum cal., 24 inch round bbl., blue/French gray finish, walnut stock.
This rifle was manufactured in 1971 in Belgium and features a blue barrel manufactured without sights, a polished bolt, gold trigger, and French
gray remaining parts. The receiver is tapped for scope mounting and engraved scope rings are included in the Browning case. A bugling elk scene
is on the right side of the front receiver ring, and a bull moose scene is on the opposite side. The floorplate has a scene with a bear raised up on its
back legs, and the trigger guard has a cougar. The rifle is signed “LA” (Louis Acampo) by the cougar, “BAERTEN” (Claude Baerten) on the floor plate,
and “SEVERIN” (L. Severin) near the moose. The sides of the barrel at the breech, the action, and the areas surrounding the scenes have leafy scroll
engraving with textured backgrounds. The barrel is marked “BROWNING ARMS COMPANY MORGAN, UTAH & MONTREAL P. Q./MADE IN BELGIUM”
on the left and “CALIBER .7.REM.MAG.ONLY 62405L71”. The matching serial number is also on the right side of the rear receiver bridge. There are Belgian proofs on the various components. It is mounted on
a Monte Carlo stock with carved leaf designs and checkering on the forend and grip, contrasting forend piece, creamy bands on the forend and grip, a gold diamond grip insert, swivel studs, and a vented
Browning recoil pad. Includes a factory case.
CONDITION: Excellent plus. The rifle retains 99% original finish and only shows some slight cycling and handling marks and a small blemish just ahead of the forend on the right side of the barrel. The stock is
near excellent with a small chip near the front recoil lug on the right and otherwise only light handling and storage marks. Mechanically excellent.
Estimate: 6000 - 9000
BOTH SIDES PICTURED
LOT 324
Outstanding Triple Signed Master Engraved
Browning Olympian Grade Bolt Action Rifle - Serial no. 52332L69, 30-06 cal., 22 inch round bbl., blue/
satin grey finish, walnut stock. Manufactured in 1969 in Belgium, this rifle features a blue barrel manufactured without sights.
The follower and bolt assembly are polished, the extractor is jeweled, and the trigger is gold washed with a French gray finish on
the remaining parts. The front receiver ring is engraved with a bugling elk on the left side, a running antelope on the right side and the remainder
of the action is relief floral vine leaf and punch dot engraved. The lower right side of the front receiver ring is signed, however writer can not see the
name because it is only showing on the very top. The serial number is marked on the right rear of the barrel. The hinged floor plate is engraved with
a buck in a wooded scene with floral leaf engraving below and on the attaching metal and signed “R.KOWALSKI” below the buck. The trigger guard is engraved with a bear with a
floral leaf pattern above and below, with “LL” below the bear. There is a two inch wedge of floral leaf engraving on the breech end of the barrel sides. The screw heads and stock bolts
are also engraved with a leaf design. The stock is extra fancy select walnut with a high gloss finish, fine line
checkering and floral and punch dot hand carving on the forearm and grip area, contrasting forend and grip
cap with a diamond shaped brass inset on the grip cap, raised comb, cheekpiece, plastic Browning buttplate
and sling swivel studs.
CONDITION: Excellent overall with 99% plus original blue and satin grey finish remaining, showing only light
handling marks. There are a few minor dings, pressure dents and some mild crazing on the stock and sharp
checkering. Mechanically excellent.
Estimate: 6000 - 8000
279

Attractive Engraved J.P. Sauer & Son Custom Mauser Rifle
LOT 325
Attractive Engraved J.P. Sauer & Son Mauser Bolt Action Rifle with
Scope - Serial no. 184319, 30-06 Springfield cal., 21 inch part octagon solid rib
bbl., blue finish, walnut stock. This very fine custom J.P. Sauer & Son Mauser rifle
is from the collection of the late Jim Wilkinson of Prescott, Arizona. Wilkinson
grew up spending his summers working the family Granite Dells Ranch in Arizona
and returning to his native Illinois for school in the fall. Wilkinson attended the
University of Illinois and began his career in his family’s Central Illinois lumberyards.
In 1946, he permanently moved to Arizona to work his own ranch in Granite
Dells and establish the Rifle Ranch, a gun store specializing in custom rifles, hand
loading, and shooting supplies. Wilkinson was an avid hunter with expeditions
to Canada and Alaska as well as more exciting destinations such as Africa,
Afghanistan, India, and Nepal, all in the pursuit of mountain sheep. Wilkinson
would become the 10th person in the world to achieve the “Super Slam” which is
a collection of 16 different types of wild sheep found on four separate continents.
Wilkinson passed away in 2001. The included Rifle Ranch tags attribute the
gunsmithing work to Bob Owen and the engraving to Albin Oblitschnig of Ferlach,
Austria. 1/3rd octagon to round barrel with raised beaded blade front and flip up
175 meter rear notch sights on the full length barrel rib marked “J.P. SAUER & SON,
SUHL-PRUSSIA”. With French gray, oak leaf and acorn engraved scope rings, Lyman
Alaskan scope, jewelled bolt and extractor, engraved bolt handle, Jaeger
trigger, and standard three position Mauser safety. The trigger guard
assembly, floorplate, grip cap, and buttplate are highly embellished
with deep cut game scene engraving with a standing grizzly bear
on the floorplate, whitetail deer bust on the trigger guard, bugling
elk on the grip cap, and a standing big horn sheep on the buttplate
trap. Each scene is bordered with fine, classic
Germanic oak leaf and acorn motif. Checkered walnut
pistol grip stock with horn forend cap, raised shadow-line cheekpiece,
and leather sling.
CONDITION: Very fine with 95% bright polished blue finish remaining, some
light edge wear at the muzzle, some small traces of visible spotting, and slightly
darkened patina on the bolt body. The engraving is sharp, deep, and highly
detailed. The stock is also very fine with crisp checkering, small dings and bruises
throughout, and a 3/16 inch hairline crack visible at the right side of the heel.
Mechanically excellent. Scope is excellent with 95% original blue on the tube and
clear optics.
Estimate: 3500 - 5500
281

Big Cat Hunting Themed Master Engraved & Signed Franz Mack Deluxe Sporting Rifle
LOT 326
Rifle Ranch Master Engraved F. Mack Signed
Custom Deluxe Sporter Mauser Bolt Action
Rifle with Scope - Serial no. 700, 338 Win magnum
cal., 26 inch round bbl., blue finish, checkered
walnut stock. This wonderfully Master Engraved
Mauser rifle is from the collection of the late Jim
Wilkinson of Prescott, Arizona. Wilkinson grew up
spending his summers working the family Granite
Dells Ranch in Arizona and returning to his native
Illinois for school in the fall. Wilkinson attended
the University of Illinois and began his career in
his families Central Illinois lumberyards. In 1946 he
permanently moved to Arizona to work his own
ranch in Granite Dells, and establish the Rifle Ranch
a gun store specializing in custom rifles, hand
loading, and shooting supplies. Wilkinson was an
avid hunter with expeditions to Canada, and Alaska
as well as more exciting destinations such as Africa,
Afghanistan, India, and Nepal, all in the pursuit of
mountain sheep. Wilkinson would become the 10th
person in the world to achieve the “Super Slam”
which is a collection of 16 different types of wild
sheep found on four separate continents. Wilkinson
passed away in 2001. Medium weight tapered barrel
without sights, inscribed “NO. 700 RIFLE RANCH -
PRESCOTT. ARIZ.” on top and “.338 MAG” on the left
side at the breech. Magnum Mauser action with
French gray Redfield swivel scope base, Redfield 4x
scope, polished bolt body and extractor, knurled
bolt handle knob, and two position low profile
wing safety. The masterful embellishment on this
rifle starts at the scope rings with a leopard on the
front roaring male tiger on the rear, fully engraved
trigger guard assembly with borders of flowing
scroll and stalking tiger on the floorplate, American
mountain lion in repose on the trigger guard, nude
woman and male lion in repose on the grip cap,
and a leopard in a tree on the cartridge trap. The
right edge of the floorplate is signed “F. MACK”
for Ferlach, Austria Master Engraver Franz Mack.
Attractive checkered walnut pistol grip stock with
rosewood forend cap, two reinforcing plugs, raised
cheekpiece, and solid rubber Old English
recoil pad.
CONDITION: Exceptionally fine with
99% bright polished blue finish, crisp
markings, mild handling marks, and
slight plum coloration on the bolt
shroud. The engraving is very sharp
and detailed. The stock is very fine
with crisp checkering, and a few very
small scratches visible. Mechanically
excellent. A stunning tribute to big cat
hunting on three continents!
Estimate: 5000 - 9000
282

Exceptional Engraved & Gold Inlaid Arnold Griebel Signed Rifle
Featuring the Coveted “Grand Slam” of North American Sheep Hunting
LOT 327
Fantastic Engraved and Gold Inlaid Master Engraver Arnold Griebel
Signed Rifle Ranch Custom “Grand Slam” Polish Wz.29 Mauser Bolt
Action Rifle in .276 Newton with Scope - Serial no. 74763Z, 276 cal., 24
1/4 inch round bbl., blue/coin finish, walnut stock. This master engraved
and gold inlaid, Rifle Ranch Custom Mauser rifle is from the collection of
the late Jim Wilkinson of Prescott, Arizona. Wilkinson grew up spending his
summers working the family Granite Dells Ranch in Arizona and returning
to his native Illinois for school in the fall. Wilkinson attended the University
of Illinois and began his career in his families Central Illinois lumberyards.
In 1946 he permanently moved to Arizona to work his own ranch in
Granite Dells, and establish the Rifle Ranch a gun store specializing in
custom rifles, hand loading, and shooting supplies. Wilkinson was an avid
hunter with expeditions to Canada, and Alaska as well as more exciting
destinations such as Africa, Afghanistan, India, and Nepal, all in the pursuit
of mountain sheep. Wilkinson would become the 10th person in the world
to achieve the “Super Slam” which is a collection of 16 different types of
wild sheep found on four separate continents. Wilkinson passed away
in 2001. The rifle features a medium weight tapered barrel with “RIFLE
RANCH/.276 NEWT” on the left side at the breech, Buehler one-piece swivel
scope base, Redfield 4x scope with matching engraved rings, overall high
polish blue finish, original “Wz.29” model marking on the left receiver rail,
bright polished bolt with blue extractor, two position safety, swept bolt
handle with smooth, round knob, and adjustable Jaeger trigger. The bulk
of the eye catching embellishment is on the trigger guard assembly and
floorplate which features borders of flowing scroll engraving surrounding
semi-relief gold inlaid images of the four species of North American
wild sheep that comprise the coveted “Grand Slam” of North American
sheep hunting. The rendered sheep are of course the Dall, Stone, Rocky
Mountain Bighorn, and Desert Bighorn. Jim Wilkinson was registered
member number 25 of the OVIS Grand Slam Club, an honor shared with
famous outdoorsman and registered member number 1 Jack O’Connor.
The forward end of the trigger guard assembly is inscribed “GRAND SLAM/
ENGR.BY/1963/A. GRIEBEL”. A gold inlaid “JSW” monogram is at the rear of
the trigger guard. There is a hidden inscription on the inside edge of the
floorplate which reads “ENGR. BY A. GRIEBEL FOR JIM WILKINSON RIFLE
RANCH”. Attractive light toned, checkered walnut pistol grip stock with
horn forend cap, checkered blue steel grip cap, raised cheek piece, and
solid rubber Rifle Ranch branded recoil pad.
CONDITION: Exceptionally fine with 99% high polish custom blue finish,
and some very light handling marks. The engraving on the trigger guard
assembly is sharp and highly detailed with highly legible inscription.
The stock is very fine with crisp checkering, some small scattered dings
and scratches, visible 1 1/2 inch hairline surface crack just under the
cheekpiece, and moderate wear on the pad. Mechanically excellent.
Scope is excellent with clear optics. A stunning Rifle Ranch custom
Mauser commemorating one man’s milestone in American big horn sheep
hunting!
Estimate: 5500 - 9500
283

284
LOT 328
Factory Engraved F.W. Heym Model 55
Pinless Side Lock Over/Under Rifle and
Shotgun Two Barrel Combo in .375 H&H
Magnum with Scope and Huey Case - Serial
no. 55932, 375 H&H magnum cal., 25 inch
solid rib bbl., blue/coin finish, highly figured
checkered walnut stock. This very fine Heym
over/under double rifle combination is from
the collection of the late Jim Wilkinson of
Prescott, Arizona. Wilkinson grew up spending
his summers working the family Granite Dells
Ranch in Arizona and returning to his native
Illinois for school in the fall. Wilkinson attended
the University of Illinois and began his career in
his families Central Illinois lumberyards. In 1946
he permanently moved to Arizona to work his
own ranch in Granite Dells, and establish the
Rifle Ranch, a gun store specializing in custom
rifles, hand loading, and shooting supplies.
Wilkinson was an avid hunter with expeditions
to Canada, and Alaska as well as more exciting
destinations such as Africa, Afghanistan, India,
and Nepal, all in the pursuit of mountain sheep.
Wilkinson would become the 10th person in
the world to achieve the “Super Slam” which is
a collection of 16 different types of wild sheep
found on four separate continents. Wilkinson
passed away in 2001. Blue Krupp steel barrels
with blade front and fixed notch rear sights,
full length matte rib, raised quarter rib section
marked “FRIEDRICH WILH. HEYM” with double
claw scope bases, Hertel & Reuss 3-10x46 scope,
standard German proofs, automatic ejectors,
and light engraving at the breech. Bright coin
finished, bolstered pinless side lock action
with dual triggers (front is set trigger), Greener
double crossbolt fastener, cocking indicators,
and manual sliding tang safety. The action and
locks have full coverage, exceptionally well
defined engraving with leafy scroll and punch
dot shading on the action, tangs, and trigger
guard, and detailed game scenes on the locks
depicting wild
boar on the right
and European
stag and hind
scene on the
left. Attractively
figured,
checkered
forearm and
pistol grip stock
with Deeley
latch, engraved
fittings, raised
cheekpiece, and serrated buttplate. Includes a
matching numbered 28 inch vent rib, 20 gauge
over/under shotgun barrel set with 3 inch
chambers, independent forearm, and improved
cylinder/improved modified chokes. Also
included is a leather and oak Huey takedown
case with heavy duty green canvas cover, two
nickel oilers, rifle and shotgun snap
caps, scope lens covers, leather
sling, and invoices for both the gun
and case. Stock measurements are:
drop at comb 1 5/8 inches; drop at
heel 2 3/4 inches; length of pull
14 1/4 inches.
CONDITION: Excellent with 95%
original blue finish on the barrels
and visible light spotting on the
front sight base and sides of
the upper barrel. The action and locks are
bright overall with sharp, detailed engraving.
The wood is also excellent with attractive
dark figure, sharp checkering, and just a
few insignificant small dings. Mechanically
excellent. The shotgun barrel set is very good
with some visible rust on the otherwise bright
muzzle face, and some small dings on the
forearm. Case is excellent with handling and
storage marks, and some minor edge wear on
the canvas cover.
Estimate: 8000 - 14000

BOTH SIDES PICTURED
LOT 329
Exceptional Engraved Pachmayr Presentation Custom Fabrique
Nationale Mauser Bolt Action Rifle with Scope - Serial no. B2280, 300 MAG cal., 24 inch round bbl., blue finish,
walnut stock. Hooded ramped blade front and four leaf (one standing, three folding) rear sights, top of barrel marked “CUSTOM
MADE BY PACHMAYR L.A. CALIF. U.S.A.”, and standard Belgian proofs. The receiver is fitted with a Pachmayr Lo-Swing scope base and
Leupold 2x7 Vari-X II scope and features full coverage deeply cut scroll engraving. The floorplate and trigger guard are engraved to match
with animal scenes of a walking bighorn sheep on the plate and a small bust of a brown bear on the guard. The bolt handle knob is finely
knurled and the bolt shroud has matching scroll engraving. With a nicely figured, finely checkered pistol grip stock with ebony forend tip,
fleur de lis scroll carved borders, gold inscription plate on the grip cap marked “TO/DUCKS UNLIMITED/FROM/FRANK PACHMAYR”, raised
cheekpiece, and solid rubber recoil pad. Pachmayr was very well known for his elaborate upgrades to Parker and Winchester Model 21
side by side shotguns, which he would have upgraded by well known engravers including Angelo Bee and Gino Cargnel, for donation to
different conservation causes throughout the country. However, very few of these presentation engraved bolt action rifles
have come up for sale.
CONDITION: Excellent with 98% plus blue finish, some scattered light handling marks, and some small edge dings on the trigger guard.
The stock is also excellent with crisp checkering, attractive figure, and some scattered small dings. Mechanically excellent.
Estimate: 4000 - 7000
BOTH SIDES PICTURED
LOT 330
Master Engraved “Kaye” Signed Pre-64 Winchester Model 70 Bolt Action Rifle with Scope - NSN, 7 mm Rem Magnum cal., 22 inch round bbl., blue
finish, highly figured checkered walnut stock. This fine custom rifle is attributed to Master Gunsmith Jerry Fisher. Built on a pre-64 style
Winchester Model 70 action with a lightly tapered medium weight barrel without sights, with light engraving and gold inlaid bands at the
muzzle and breech. The action is fitted with scope bases, rings, and a Leupold Vari-X III 2.5-8x scope. The floorplate is intricately engraved
with deep cut scroll patterns surrounding a grouping of bighorn sheep set against a mountainous background. The sheep are inlaid with
fine silver with gold inlaid horns. The floorplate is signed “KAYE” just forward of the trigger guard for American Master Engraver Tommy Kaye
(founding FEGA member). With a jewelled bolt body and knurled bolt handle knob. Highly figured multi-point checkered pistol grip stock
with ebony forend cap, engraved blue steel grip cap, raised shadow line cheekpiece, and checkered blue steel buttplate.
CONDITION: Very fine as master embellished and
refinished with 99% of the high quality blue finish
remaining, sharp engraving, light patina on the floorplate,
and scattered light handling marks. The stock is also
very fine with crisp checkering, attractive dark figure,
and some small scattered dings. Mechanically excellent.
Scope is excellent with some light scratches on the tube
and clear optics.
Estimate: 4000 - 7000
285

Franz Mack Master Engraved & Signed Custom Sporting Rifle with Exquisite Maple Stock
LOT 331
Deep Relief Master Engraved F. Mack Signed Rifle
Ranch Custom Mauser Argentine Contract Model
1909 Bolt Action Rifle with Scope and Quilted Maple
Stock - Serial no. B9058, 257 Roberts cal., 23
inch round bbl., blue/coin finish, checkered
quilted maple stock. This very fine Rifle Ranch
custom Argentine Contract Model 1909
Mauser is from the collection of the late Jim
Wilkinson of Prescott, Arizona. Wilkinson
grew up spending his summers working the
family Granite Dells Ranch in Arizona and
returning to his native Illinois for school in
the fall. Wilkinson attended the University of
Illinois and began his career in his families
Central Illinois lumberyards. In 1946, he
permanently moved to Arizona to work his
own ranch in Granite Dells and established the Rifle Ranch,
a gun store specializing in custom rifles, hand loading,
and shooting supplies. Wilkinson was an avid hunter with
expeditions to Canada and Alaska as well as more exciting
destinations such as Africa, Afghanistan, India, and Nepal, all
in the pursuit of mountain sheep.
286

Wilkinson would become the 10th person in the world to
achieve the “Super Slam” which is a collection of 16 different
types of wild sheep found on four separate continents.
Wilkinson passed away in 2001. The tapered barrel is not
fitted with sights and is marked “NO. 400 - RIFLE RANCH -
PRESCOTT, ARIZ.” on top, “257 ROBERTS” on the left side at
the breech, and the receiver retains the original Model 1909
markings and serial number. Receiver is fitted with a onepiece
oak leaf and acorn engraved swivel style scope base,
Redfield 6x scope, and Jaeger adjustable trigger. The barrel
and receiver are an attractive matte blue, and the trigger
guard assembly, floorplate, grip cap, and buttplate are a
coin gray. The engraved game scenes feature Northern North American animals including a highly detailed herd of pronghorn antelope on the floorplate, marmot
on the face of the trigger guard, bobcat on the grip cap, and an absolutely fabulous standing big horn ram scene on the buttplate. Each animal scene is bordered
with deep cut oak leaf and acorn motif borders. The floorplate is signed “F. MACK” for Ferlach, Austria Master Engraver Franz Mack. Highly attractive blonde maple,
checkered pistol grip stock with desirable quilted figure, horn forend insert, sling swivel studs, and trapdoor in the buttplate.
CONDITION: Exceptionally fine. The rifle retains 99% of the custom matte blue finish with sharp Rifle Ranch markings, some light scattered handling marks, and
some visible small blemishes under the blue. The stock is very fine with crisp checkering, profuse, highly attractive quilted figure, and a few very small scattered
handling marks. Mechanically excellent. Scope is excellent with clear optics.
Estimate: 3250 - 4750
287

Magnificent & Well-Documented Serial Number G1 Master Engraved Gold Inlaid
"The Leopard" Custom Winchester Model 70 Rifle
AS PICTURED AND DESCRIBED IN THE BOOK
MASTERY OF WOOD & METAL BY TURPIN
LOT 332
Astounding World Famous Serial Number “G1”
Cased Master Engraved Gold Inlaid Lynton McKenzie
Signed David Miller Co. Safari Club International Big Five Collection No.
5 “The Leopard” Custom Winchester Model 70 Bolt Action
Rifle - Serial no. G1, 338 Win magnum cal., 22 inch round bbl., blue/
French gray finish, highly figured checkered walnut pistol grip stock.
At the 1982 Safari Club International convention at the Tropicana
hotel in Las Vegas, Nevada, the SCI introduced the SCI Big Five
Masterpiece Collection of highly embellished, hand crafted custom
rifles. Fantastically engraved and gold inlaid rifles with engraving
based on original oil paintings by well known artists who supported
the SCI. The David Miller Company was instrumental in bringing this
project to fulfillment and as such they were given the task of constructing not only
the first in the series, but the last as well. This Rifle Number 5 entitled “The Leopard”
was the final in the series and when it sold at auction at the 1986 convention, it
hammered for an astounding $201,000, a world record at that time. The rifle is
pictured on multiple pages of the book “Mastery of Wood & Metal: David Miller
Co.” by Tom Turpin, and has been featured on the cover of firearms magazines
such as the December 1991 issue of “Australian Shooters Journal”. This absolutely
fabulous rifle is built on Winchester Model 70 action serial number “G1” designed
in a partnership between David Miller and U.S. Repeating Arms Co. (this action is
now known as the Winchester Model 70 Classic action). The medium weight barrel
is fitted with a ramped beaded blade front sight with knurled hood with dual gold
inlaid bands, gold inlaid bands and leafy scroll at the muzzle, and matching gold
inlay on the sight ramp. The barrel is marked “338 WIN MAG” in finely engraved
lettering between the matching engraved and gold inlaid center band with a
sling swivel eye, and the raised quarter rib with a contrasting French gray
face marked “DAVID MILLER CO.” ahead of the
express notch rear sight and “S.C.I. No. 5” with
gold inlaid line borders, and matching gold
inlaid leafy acanthus scroll transitioning from
the rib to the receiver ring. The receiver ring
and bridge are finished in the same contrasting
French gray with further contrasting blue and
gold inlaid line borders surrounding yet more
gold inlaid leafy scroll work. The floorplate in a
combination for fine French gray and blue with
a wonderfully detailed, semi-relief engraved
image of a gold inlaid leopard resting in a tree.
The floorplate is signed “L. McKENZIE” just ahead
of the trigger guard. The magazine box (under
the floorplate) is inscribed “DAVID MILLER CURT
CRUM DALE DREW” on the left, and “ART BY GUY
COHELEACH ENG. BY LYNTON McKENZIE” and
even the top of the magazine spring is stamped
“4 CARTRIDGES” surrounded by engraved leaf scroll.
It also seems that no area was deemed too minor
to warrant fine, flush gold inlays including the bolt
handle and shroud, trigger guard, and even the very
end of the bolt handle knob. The pistol grip stock
is highly figured walnut with an ebony forend cap,
engraved steel grip cap with a relief gold inlaid Safari
Club International logo, engraved and gold inlaid
reinforcing bolts, raised shadowline cheek piece,
engraved and gold inlaid inset rear sling swivel
eye, and French gray finished steel buttplate with
gold inlaid borders (even the sides of the buttplate
are engraved and inlaid with gold!) The buttplate
is inscribed “GOLDEN ANNIVERSARY/MODEL 70
1936-1986” in two banners. The rifle includes its
original leather bound oak case with large brass
Safari Club International logo on the exterior of the
lid, engraved and gold inlaid brass fittings, small
plaque on the interior inscribed “CASE BY/DAVID
MILLER CO./1986”. The interior of the case is lined in
a combination of gray and brown suede and has three
separate compartments with latching lids made of highly
figured walnut which is a very close match to the rifle stock.
The interior of the lid is affixed with a brass plaque inscribed
“BIG FIVE CLASSIC MASTERPIECE COLLECTION/NUMBER FIVE/THE
LEOPARD/CREATED IN ASSOCIATION WITH/U.S. REPEATING ARMS
COMPANY/SAFARI CLUB INTERNATIONAL/CRAFTED BY/DAVID MILLER
CO./DAVID MILLER*CURT CRUM*DALE DREW*LYNTON McKENZIE”. The case
contains the following accessories: matching engraved and gold inlaid Steve
Hoel folding pocket knife; set of two ebony handled London pattern turnscrews with
engraved and gold inlaid fittings, three brass containers for patches, oil, and solvent
with engraved lids (patch lid signed “ENG BY S.J. LINDSAY”; cleaning rod with matching
ebony handle and engraved and gold inlaid fittings; cleaning rod heads; leather sling
with engraved and gold inlaid quick release swivels; set of five nickel and gold finished
snap caps; 20 round box of David Miller .338 Winchester magnum ammunition finished
in nickel and gold, and a separate unattached brass plaque inscribed with the maker
and hammer price information for each of the Big Five rifles from 1982 to 1986.
CONDITION: Near new in case with only very light scattered handling marks overall,
brilliant gold work, sharp checkering and intense, dark figure on the wood. The case is
excellent with just a few small exterior storage marks. A once in a lifetime opportunity
to own not only a Winchester serial number 1, but also the finest custom bolt action
rifle to ever come through RIAC!
Estimate: 80000 - 140000
288

Sublime in Every Respect - "Not All Art is Framed"
AS PICTURED AND DESCRIBED IN THE BOOK
MODERN CUSTOM GUNS BY TURPIN
289

BOTH SIDES PICTURED
LOT 333
Mater Engraved Gold Inlaid Kaye Signed Custom Pre-64 Winchester Model 70
Bolt Action Rifle with Scope - Serial no. 321276, 270 Win cal., 22 inch round bbl., blue finish, walnut stock. This fine custom Winchester
Model 70 is attributed to Master Gunsmith Pete Grisel. Grisel was a founding member of the American Custom Gun Makers Guild and
Dakota Arms. Pete was also the designer of the Dakota 76 rifle action. Receiver manufactured in 1954 and fitted with a tapered medium weight barrel without
sights, Buehler swivel style scope bases and rings, Leupold VARI-X III 2.5x8 scope, serrated trigger, and round knob bolt handle with knurled panels. The floorplate and trigger guard are
engraved with tight flowing American scroll surrounding a relief cut silver and rose gold inlaid bust of a bighorn sheep. The rear edge of the floorplate is signed “KAYE” just ahead of the trigger
guard for American Master Engraver Tommy Kaye. Fitted with a highly attractive, multi-point checkered, Steve Lizenby pistol grip stock with ebony forend cap, inset sling swivels, skeletonized blue steel
grip cap, raised cheekpiece, and skeleton buttplate on a checkered bare butt.
CONDITION: Very fine as professionally assembled and refinished with 99% of the matte blue finish remaining, and some light cycling marks on the bolt body. The stock is also very fine with sharp
checkering, and just a few small scattered dings. Mechanically excellent. Scope is excellent with clear optics.
Estimate: 2750 - 4750
BOTH SIDES PICTURED
LOT 334
High-Tech Custom Rifles Winchester Model 70 Wild Thing Bolt Action Rifle 1993 Houston
Safari Club Auction Gun with Case - Serial no. 444806, 416 R.Mag cal., 23 1/2 inch round bbl., blue finish, walnut stock. Receiver manufactured in
1959. Fitted with a medium weight barrel with threaded muzzle, hooded and ramped blade front sight, mid barrel band with sling swivel eye, four leaf (one standing,
three folding) express notch rear sight on a raised quarter rib, and”High-Tech Custom Rifles -WILD THING- 416 Rem Mag” marking on the left side of the barrel at the breech. Standard
Pre-64 Winchester Model 70 action with drilled and tapped holes for scope mounting, and hinged floorplate. Fitted with a fiddleback figured pistol grip stock with rosewood forend cap,
dual reinforcing bolts, blue steel grip cap, and solid rubber recoil pad. Includes an Americase aluminum takedown case with an inscribed plaque on the lid reading “HOUSTON SAFARI CLUB/1993”, matching
marking on the interior of the lid, and leather sling with quick detach swivels.
CONDITION: Very fine as refurbished and upgraded by High-Tech Custom. With 99% of the matte blue finish remaining, some light scattered handling marks, and light cycling marks on the bolt body. The
stock is also very fine with highly attractive figure, sharp checkering, and just a few small insignificant dings. Mechanically excellent. Case is excellent with some light storage marks on the exterior.
Estimate: 2500 - 4500
BOTH SIDES PICTURED
290
LOT 335
Engraved Mark Lee Custom Mauser Bolt Action Rifle with Scope - Serial no. 3D8,
25-06 cal., 24 inch round bbl., blue finish, walnut stock. Built on a Mauser 98 type action with a lightweight tapered barrel without sights,
underside of the chamber marked “1-14-1982/MARK LEE”, “MARK LEE” marking on the underside of the action, swivel style scope bases and
rings with a Leupold VARI-X III 2.5x8 scope, and fully engine turned bolt body and extractor, and wedges of engraving on the breech end. The receiver features
wedges of fine scroll engraving and the floorplate is engraved with a standing pronghorn scene surrounded with broader leafy scroll. The trigger guard is inscribed with the initials
“W/S/Y”. Fitted with an attractively figured checkered pistol grip stock with ebony forend cap, carved fleur-de-lis accents, engraved blue steel grip cap, raised cheekpiece, and lightly engraved
skeleton buttplate on a checkered bare butt.
CONDITION: Very fine with 99% professionally refinished blue remaining, crisp engraving, and some scattered light handling and cycling marks. The stock is also very fine with sharp checkering, attractive
grain, and some small scattered dings. Mechanically excellent. Scope is excellent with clear optics.
Estimate: 2500 - 3500

BOTH SIDES PICTURED
LOT 336
Master Engraved, Gold Inlaid, and Gian
Marco Sabatti Signed V. Giani Safari Club International Special
Africa Model Bolt Action Rifle with Scope and Case -
Serial no. 01281, 416 Rigby cal., 24 inch round bbl., blue finish, walnut stock. Ramped bead
blade front sight with flip up hood, barrel gold inlaid with “V. Giani - Gardone V.T.” between the sling swivel
band and two leaf (one standing, one folding) rear notch sight with gold inlaid sighting lines, “.416 RIGBY” in gold inlay on the raised quarter rib, and standard Italian
commercial proofs. The receiver features textured panels of light engraving with the Giani crest on the
right side of the rear bridge. The left receiver wall is inscribed “Special Africa Model” in fancy script. Fitted
with matching engraved scope bases and rings (front ring numbered to the gun in gold inlay) and Steiner
Nighthunter Extreme 1-5x24 red dot scope. Fancy scroll engraved bolt handle with matching textured
shroud. The floorplate is fully engraved with fine, fancy scroll surrounding a gold inlaid African lion over a
platinum inlaid African shield. The floorplate is inscribed and gold inlaid “SAFARI CLUB/INTERNATIONAL/
SPECIAL EDITION/FOR THE/42th ANNUAL/HUNTERS CONVENTION”. The floorplate is signed “GIAN MARCO
SABATTI INC.” for Italian Master Engraver Gian Marco Sabatti. Finely figured, multi-point checkered
walnut pistol grip stock with ebony forend tip, engraved grip cap, raised cheekpiece, and solid rubber
recoil pad. With V. Giani soft case.
CONDITION: Excellent. 98% original blue finish remains with some light handling marks and some visible
mild wear on the left side of the muzzle. The stock is also excellent with crisp checkering and some small
dings. Mechanically excellent. Scope is excellent with clear optics.
Estimate: 9500 - 14000
BOTH SIDES PICTURED
LOT 337
Factory Engraved Weatherby Mark V Crown Grade Bolt Action Rifle - Serial no. P61179, 300 WBY magnum
cal., 26 inch round bbl., blue finish, walnut stock. Ramped beaded blade front and Williams adjustable notch rear sights on the tapered medium weight barrel,
standard barrel markings, and a 9 inch section of deep cut, leafy scroll engraving on top of the barrel. The receiver features matching leafy scroll engraving with
standard markings, factory drilled and tapped holes for scope bases, jewelled and fluted bolt, jewelled follower, engraved floorplate with relief engraved gold inlaid
moose, matching engraved trigger guard, and knurled bolt handle knob. Walnut pistol grip stock with
some attractive figure, rosewood forend and grip caps, contrasting wood inlays, leafy scroll carved grip
areas, gold inlaid inscription plates at the forend and grip cap inscribed “F/D/R”, raised cheekpiece, and
vented Weatherby recoil pad.
CONDITION: Excellent with 95% plus original blue finish, mild handling marks, and some light small
scratches visible on the barrel. There is light evidence that scope bases were installed on the receiver.
The stock is also excellent with sharp carving, attractive grain, and some small scattered dings.
Mechanically excellent.
Estimate: 4000 - 6000
291

LOT 338
Champlin Firearms Inc. Bolt Action Mannlicher Style Rifle with Scope
- Serial no. 563, 338 Win magnum cal., 19 inch octagon bbl., blue finish,
walnut stock. Ramped beaded blade front and fixed rear notch sights,
standard barrel and receiver markings, Leupold 1x4 Vari-X II scope, jeweled
bolt, hinged floorplate, and adjustable trigger. Full length Mannlicher style checkered pistol grip stock
with raised cheekpiece, and solid Old English recoil pad.
CONDITION: Excellent overall. 99% original blue finish remains with some light handling marks, sharp checkering, and some small
dings on the stock. Mechanically excellent. Scope is excellent with clear optics.
Estimate: 3500 - 5500
LOT 339
Champlin Firearms Inc. Bolt Action Rifle with
Scope - Serial no. 207, 7 mm Rem Magnum cal., 24 1/2
inch octagon bbl., blue finish, walnut stock. Custom manufactured with a Champlin Firearms action
and a right side mounted thumb safety. This rifle has a tapered octagon barrel without provisions for fixed sights, marked “R. J. STAMPER”
on top flat, and chambered in 7mm Remington Magnum. The receiver is drilled, tapped and mounted with blocks, rings, and a Redfield 3-9x 1” tube scope. The
bolt and magazine follower are brilliantly jeweled. Mounted to a fleur-de-lis checkered, fancy Turkish walnut, pistol grip stock with raised shadow-line cheekpiece,
contrasting forend, contrasting grip cap with brass insert, Pachmayr solid recoil pad, and sling swivel studs.
CONDITION: Excellent overall, retains 99% original blue finish with very minimal handling/cycling evidence. The wood has only the slightest handling marks and
crisp checkering. Mechanically excellent. The optics are clear.
Estimate: 3250 - 4750
LOT 340
Dakota Arms Model 76 Bolt Action Rifle with Zeiss
Scope - Serial no. 2513, 330 Dakota cal., 23 inch round bbl., blue finish, walnut stock. Express rear
sight with blade front sight. Includes a Zeiss Diavari C 3-9x36mm MC scope.
CONDITION: Very fine overall, with 97% original blue, mild handling evidence, damage to the buttpad, and sharp stock checkering and a few minor
dents. The scope optics are sharp. Mechanically excellent.
Estimate: 3000 - 4500
LOT 341
Custom Winchester Model 70 Bolt Action Rifle
with Griffin and Howe Mounted Scope in .270 WBY
Magnum - Serial no. 133054, 270 WBY Magnum cal., 24 inch round bbl., matte blue finish, walnut
stock. This rifle was expertly built on a pre-64 Model 70 receiver that was manufactured in 1950 with the serial number marked on the right side.
The left side of the chamber is marked “270 WBY MAG” with no other visible markings. The rifle features a hooded beaded blade front sight, single fixed leaf dual folding
leaf rear sight, and barrel band mounted front sling swivel stud. The rifle is mounted in a semi-fancy walnut pistol grip stock with stylized fleur-de-lis checkering, round
forend with contrasting tip, steel pistol grip cap, rear sling swivel stud, shadow line cheekpiece, and a black line Pachmayr Old English solid rubber recoil pad. Includes a Leupold Vari-X III
3.5x10 scope with a Griffin and Howe side mount.
CONDITION: Very fine as custom upgraded, stocked, and barreled with 99% plus finish remaining with a few light handling marks. Mechanically excellent. The scope is excellent with clear optics.
Estimate: 2000 - 3000
LOT 342
Cooper Arms Model 52 Bolt Action Rifle - Serial
no. 8721, 270 Win cal., 25 inch round bbl., blue finish, walnut stock. Manufactured without sights with a LANTAC
Dragon three chamber, ported muzzle brake, standard markings on the left side of the barrel, factory drilled and tapped
receiver, polished bolt body, and detachable box magazine. Checkered pistol grip stock with sling swivel studs, blue steel grip cap, and rubber recoil pad.
CONDITION: Excellent with 95% plus original blue finish, some light carbon buildup and edge wear on the muzzle brake, some touched up small scratches on the right
side of the barrel, small nicks around the magazine well edges, and handling marks. The stock is also excellent with some small visible dings and sharp checkering.
Mechanically excellent.
Estimate: 1400 - 2000
LOT 343
Engraved and Gold Banded Wichita Classic Single Shot Bolt Action Pistol with Scope - Serial no. 19, 30 cal., 11 inch octagon bbl.,
grey finish, walnut grips. About 40% coverage floral scroll engraving on the barrel, receiver, and bolt. Gold bands at the muzzle, front of the receiver, and
on the bolt. Includes a Burris 1.5-4x long eye relief scope.
CONDITION: Excellent overall, retaining 99% original finish, limited handling evidence, some light scratches on the underside of the barrel, and sharp checking on
the grip. The scope optics are clear. Mechanically excellent.
Estimate: 1400 - 2250
292

BOTH SIDES PICTURED
LOT 344
Winchester Model 21 Side by Side 20 Gauge Shotgun with Case - Serial no. 19116, 20 gauge, 28 inch solid rib bbl.,
blue finish, walnut stock. Blue Winchester Proof Steel demi-block barrels with red bead front and white bead mid sights
on the matte, concave rib, 2 3/4 inch chambers with automatic ejectors, chokes marked “MOD/FULL” and
Winchester “WP” proofs on the flats. Standard markings on the water table, single trigger with selector,
and automatic sliding tang safety. Attractively figured, walnut
beavertail forearm and pistol grip stock with Winchester hard
rubber grip cap, and solid Winchester recoil pad. Includes
cloth and leather hard case and snap caps. Bore and stock
measurements are: chambers marked and measured at 2 3/4
inches; bores measured at .617/.615; chokes .012/.025; drop at
comb 1 1/2 inches; drop at heel 2 3/8 inches; length of pull 13 1/2 inches; weight 6 lbs. 11 oz.
CONDITION: Very fine with 97% plus original blue finish, scattered light handling marks, and some light wear
under the forearm. The refinished wood is also very fine with sharp checkering, faint hairline crack at the tip of the upper tang, and some
small scattered scratches. Mechanically excellent. Case is excellent.
Estimate: 3250 - 4500
BOTH SIDES PICTURED
LOT 345
Winchester Model 42 Slide
Action Skeet Shotgun - Serial no. 142703, 410 gauge, 28 inch vent rib bbl., blue
finish, walnut stock. Manufactured in 1960. Dual bead sights on the first style Winchester vent rib with
round posts and “doughnut” type bases, standard barrel
markings, (scarce) 2 1/2 inch chamber, offset Winchester
“WP” proofs visible on the barrel and receiver at the
breech, and “SKEET” marked choke. Diamond pattern
checkered extension forearm and straight grip checkered
stock with checkered plastic Winchester buttplate. Length
of pull is 13 3/4 inches.
CONDITION: Very fine with 90% original blue finish areas of scratches
on the barrel (appear to be from disassembly, cycling wear on the magazine tube and action bar, and areas
of mild edge wear. The wood is also very fine with sharp
checkering and a few small dings. Mechanically excellent.
Estimate: 3000 - 4500
LOT 346
Exceptional and Scarce Winchester Model 12 Slide Action 20 Gauge Shotgun with
Original Box - Serial no. 1961161, 20 gauge, 26 inch round bbl., blue finish, walnut stock.
Manufactured in 1963. Single bead front sight, 2 3/4 inch chamber, improved cylinder
marked choke (scarce). Standard Winchester markings including the factory proof on the
receiver and barrel at the breech. 11 groove walnut forearm and slightly fancier walnut
pistol grip stock with checkered factory plastic buttplate. Length of pull is 14 inches. Complete
with the original box numbered to the gun, hanging tag and manual.
CONDITION: Near new in original box. The shotgun retains 99% original blue finish showing some thinning to a gray on the magazine
and limited light spotting on the breech of the barrel. The extraordinary highly figured walnut stock is also excellent plus with a couple
very minor pressure dents and white residue on the buttplate. The box is very fine.
Estimate: 3000 - 4500
LOT 347
Winchester Model 12 Slide Action 3 Inch Chamber Shotgun
with Solid Rib Barrel - Serial no. 1543442, 12 gauge, 30 inch
solid rib bbl., blue finish, walnut stock. Manufactured in 1956.
Single bead sight on the matte rib with standard barrel markings, Winchester “WP” proofs on the barrel and
receiver at the breech, 3 inch chamber, full choke, and matching numbers on the receiver and extension.
Grooved forearm and smooth pistol grip stock with solid rubber Winchester recoil pad. Length of pull is 13 5/8 inches.
CONDITION: Excellent with 95% original blue finish, some visible muzzle wear, scattered small scratches on the receiver, and mild
slide retraction marks on the magazine tube. The reoiled wood is very fine with some small scattered dings. Mechanically excellent.
Estimate: 900 - 1400
293

Rare Pre-World War II Deluxe Winchester Model 42 Shotgun with Desirable Solid Rib Barrel
LOT 348
Desirable and Rare Pre-World War II Winchester Deluxe Model 42 Slide
Action Shotgun with Solid Rib Barrel - Serial no. 33982, 410 gauge, 26 inch
solid rib bbl., blue finish, walnut stock. Manufactured in 1937. Single bead sight on
the matte rib barrel with “-WINCHESTER/PROOF STEEL-MODEL 42- WINCHESTER/
TRADEMARK- .410-3 IN.” marking on the left side, 3 inch chamber Winchester
“WP” proofs on the barrel and receiver at the breech, and full choke. Diamond
checkered fancy walnut slide handle and pistol grip stock with checkered
Winchester buttplate. Length of pull is 13 7/8 inches.
CONDITION: Extremely fine with 85% plus original blue finish, moderate
light cycling marks visible on the magazine tube and action bar,
scattered surface scratches, and some traces of very light
spotting. The wood is also very fine with crisp
checkering, small dings, attractive grain, and
some scratches. Mechanically excellent.
Estimate: 12000 - 17000
294

BOTH SIDES PICTURED
LOT 349
Winchester Model 42 Slide Action Skeet Shotgun
with Solid Rib Barrel and Fancy
Wood - Serial no. 150092, 410 gauge,
26 inch solid rib bbl., blue finish, highly
figured walnut stock. Manufactured
in 1963. Single red bead sight on the
matte rib barrel with standard markings, 3 inch
chamber, Winchester “WP” proofs on the barrel
and receiver at the breech, and “SKEET” marked
choke. Fancy figured factory style 12-A checkered extension slide handle and pistol grip stock
with blue steel grip cap and checkered plastic Winchester buttplate. Length of pull is 13 7/8 inches.
CONDITION: Very fine with 90% of the blue finish remaining, slight plum cast on the forward
trigger guard, small cycling marks, and small traces of edge wear. The wood is also very fine with
a small repaired break to the left of the receiver tang, well defined checkering, and small scattered dings.
Mechanically excellent.
Estimate: 3500 - 5500
LOT 350
Winchester Model 21
Skeet Grade Side by Side Shotgun - Serial no. 20756, 12 gauge, 28 inch solid rib
bbl., blue finish, walnut stock. Red bead front and steel bead mid sights on the matte, concave rib, the two-line “WINCHESTER - 12
GAUGE/2 3/4 CHAM.” marking on the left barrel, 2 3/4 inch chambers with ejectors, standard markings and Winchester “WP” proofs on
the flats, and “WS-1/WS-2” marked chokes. Full blue receiver with standard markings on the water table. The trigger plate is marked “SKEET”
ahead of the trigger guard. Single trigger with selector and manual sliding tang safety. “Kidney” pattern checkered beavertail forearm and pistol grip stock
with Winchester hard rubber grip cap, and vented White Line recoil pad. Bore and stock measurements are: chambers marked and measured at 2 3/4 inches; bores .731/.731;
chokes .002(jug)/.014; drop at comb 1 1/2 inches; drop at heel 2 1/2 inches; length of pull 13 3/4 inches.
CONDITION: Fine with 80% bright original blue finish, cold blue touched up light pitting visible at the muzzles, wear under the forearm, scattered dings on the rib, and edge wear and
scratches on the action and trigger guard. The wood is also fine with sharp checkering,
scattered small dings and scratches, small chip at the tip of the upper tang, and replacement
recoil pad. Mechanically excellent.
Estimate: 2750 - 4500
LOT 351
Exceptional Winchester Model 12 Slide Action Shotgun with Original
Box - Serial no. 1559734, 12 gauge, 28 inch round bbl., blue finish, walnut stock.
Manufactured in 1956. Standard Winchester markings including the factory proofs
on top of the barrel and receiver at the breech. Single bead front sight, choke
marked “MOD”, 2 3/4 inch chamber and a length of pull of 14 inches. The shotgun
has the hanging tag, 10 commandments of safety pamphlet and instructions pamphlet. Smooth pistol grip stock and 14
groove forearm with the buttstock fitted with a checkered plastic buttplate. The factory box is numbered to the gun and
has the correct yellow end label, protective paper, and cardboard partitions
CONDITION: Excellent plus in original box. The shotgun retains 99% plus original blue finish showing only light slide
wear. The wood is also excellent with only a couple minor pressure dents on the buttstock. The box is very fine. A
fantastic example of a pre-64 Winchester Model 12 shotgun with the original factory box.
Estimate: 2750 - 4000
LOT 352
Excellent Winchester Model 1897 Slide Action Solid Frame Riot Shotgun
- Serial no. E720505, 12 gauge, 20 inch round bbl., blue finish, walnut stock.
Manufactured in 1923 with a single brass bead sight, choked cylinder and a 2 3/4 inch chamber.
The left side of the barrel is marked with the two-line address and patent date information in front of “12 GA.” and “CYL.”.
Mounted on an 18 groove ribbed round forearm and pistol grip stock with a hard rubber buttplate. Length of pull is 13 5/8 inches.
CONDITION: Excellent with 95% plus bright original high polish blue finish, mild slide retraction marks visible on the magazine tube and action
bar, and some small scratches and handling marks. The wood is also excellent with attractive color and some small scattered dings. Mechanically
excellent. A nice Winchester 1897 Riot Gun!
Estimate: 1600 - 2500
295

LOT 353
Cased Factory
Engraved
Winchester Parker
Reproduction DHE
Grade 28 Gauge
Side by Side
Shotgun Two Barrel
Set - Serial no. 28-01425, 28 gauge, 28 inch solid
rib bbl., blue/casehardened finish, walnut stock. Manufactured
1983-1989 with standard markings including extensive floral
scroll, bird dog, and pheasant scenes engraved on the receiver.
Single brass bead sight on the solid matte rib, single trigger, chokes
marked modified/full, and 2 3/4 inch chambers. The included extra barrel set is 26 inches and
numbered to match with 2 3/4 inch chambers, and improved cylinder/modified chokes . Finely
figured multi-point checkered splinter forearm and straight grip stock with blank initial plate, and engraved skeleton buttplate on a checkered butt.
Includes a leather wrapped takedown case that holds the set with cloth covering and two snap caps. Length of pull is 14 inches.
CONDITION: Excellent with 99% original blue finish and some light handling marks on the barrels. The receiver has 80% original case colors with the balance fading to a
silver patina. The wood is also excellent with sharp checkering and a few small dings. Mechanically excellent. Extra barrel is excellent. Case is excellent.
Estimate: 6500 - 8500
LOT 354
Factory Engraved Winchester
Parker Reproduction Grade DHE
Double Barrel Shotgun with Case
- Serial no. 12-969, 12 gauge, 26 inch
solid rib bbl., blue/casehardened
finish, walnut stock. Manufactured in
the 1980s as a faithful reproduction of the beloved Parker side by side shotgun.
Standard markings and features. Engraved with hunting dogs on the sides, three
pheasants on the underside, and floral scroll on the balance. Includes a leather
bound Winchester Takedown case with canvas cover. Measurements: 2 3/4 inch
chambers, improved cylinder/modified chokes, 1 3/16 inch drop at comb,
2 1/4 inch drop at heel, and 14 inch length of pull.
CONDITION: Excellent overall, retaining 99% original finish, limited handling evidence, and sharp wood checkering. The case is also excellent. Mechanically excellent.
Estimate: 1800 - 2750
LOT 355
Factory Engraved Ithaca Grade 4E Knick Single Barrel
Trap Shotgun with Case - Serial no. 240405689, 12 gauge, 32 inch vent rib bbl., blue/casehardened finish,
walnut stock. Manufactured in 1977. High visibility orange front and white bead mid sights on the wide, matte, vent rib,
light engraving on either side of the chamber, 2 3/4 inch chamber with automatic ejector, “Fifth of the last eleven 4E Knicks”
inscription on the jewelled barrel flat, and full choke. Casehardened action with standard Grade 4 engraving of a Native American with a bow on the
right, trap shooter on the left, flourishes of broad scroll, and fine punch dot backgrounds. Checkered beavertail forearm and pistol grip stock with fancy fleur de
lis borders, engraved fittings, blank initial oval, and solid rubber recoil pad. With black leatherette factory takedown case, Ithaca shipping crate (no visible serial number),
and cardboard sleeve. Includes several (poor quality) copies of letters purportedly from then Ithaca President Jerald T. Baldridge dated February 1, 1977 stating that this
is the 5th of the last 11 Grade 4E single barrel trap guns manufactured. Stock measurements are: drop at comb 1 5 1/16 inches; drop at heel 1 5/16 inches; length of pull 14 1/2 inches.
CONDITION: Near new in case with a few scattered light handling marks. The case is near excellent with a few small scuffs on the exterior. Shipping crate is fair overall with mostly illegible label.
Estimate: 1400 - 2250
296
LOT 356
Factory Engraved Ithaca Grade 4E Knick Single
Barrel Trap Shotgun - Serial no. 403366, 12 gauge, 30 inch vent rib bbl., blue finish, walnut stock.
Manufactured in 1950. Red front and white bead mid sights on the wide, matte vent rib, light engraving
at the breech end of the barrel, 2 3/4 inch chamber with automatic ejector, standard markings and proofs on the flat,
and improved modified choke. Blued receiver with standard Grade 4 engraving of a Native American with bow and arrow on the right, trap
shooter on the left, and broad flowing scroll on the balance. Checkered beavertail forearm and pistol grip stock with fleur de lis accents, blank initial
oval, and adjustable Morgan recoil pad. With Browning takedown case. Stock measurements are: drop at comb 1 7/16 inches; drop at heel 1 11/16 inches;
length of pull 14 1/2 inches.
CONDITION: Fine as professionally refinished. The barrel has 95% plus original blue finish with some small nicks and scratches. The receiver has 99% high quality blue finish, and well defined engraving.
The trigger guard has a mostly gray patina on the tang. The wood is also fine with crisp checkering, some small dings, small hairline crack just ahead of the forearm shoe, and added recoil pad.
Mechanically excellent. Case is very good overall.
Estimate: 1100 - 1600

LOT 357
Factory Engraved Winchester
Parker Reproduction Grade
DHE Double Barrel 20 Gauge
Shotgun with Box and Case
- Serial no. 20-02000, 20 gauge,
26 inch solid rib bbl., blue/
casehardened finish, walnut stock. Manufactured in the 1980s
as a faithful reproduction of the beloved Parker side by side shotgun. Standard
markings and features. Engraved with hunting dogs on the sides, three
pheasants on the underside, and floral scroll on the balance. Includes original
box and a leather bound Winchester takedown case with canvas cover. Measurements: 2 3/4 inch chambers, improved cylinder/
modified chokes, 1 7/16 inch drop at comb, 2 1/8 inch drop at heel, and 14 1/2 inch length of pull.
CONDITION: Excellent overall, retaining 99% original blue and 95% original case colors, minor handling evidence, some small areas of silvered out
casehardening, and sharp wood checkering. The box is very good and case is excellent. Mechanically excellent.
Estimate: 2750 - 4250
LOT 358
Engraved Gold Inlaid Winchester Model 23 Side by Side 28 Gauge Shotgun with Case -
Serial no. CL28-250E, 28 gauge, 26 inch vent rib bbl., blue finish, walnut stock. Dual white bead sights on the matte vent rib barrels
with 2 3/4 inch chambers, automatic ejectors, improved cylinder/modified chokes, and standard markings. Full blue finished receiver
with light scroll engraving, gold inlaid pigeon on the underside, single selective gold washed trigger, and tang mounted safety/selector switch. Checkered
walnut pistol grip stock and forearm with engraved fittings and grip cap, and solid Winchester recoil pad. With Winchester takedown case and set of snap
caps. Stock measurements are: drop at comb 1 3/8 inches; drop at heel 2 3/8 inches; length of pull 14 1/4 inches.
CONDITION: Excellent overall with 99% original blue finish, crisp engraving, attractive wood grain, sharp checkering, and some light handling marks.
Mechanically excellent. Case is good with scuffs and scrapes on the exterior leather.
Estimate: 2750 - 4250
LOT 359
Engraved Connecticut Shotgun Mfg Co. RBL Launch Edition Side by Side 20
Gauge Shotgun with Case - Serial no. RBL001506, 20 gauge, 28 inch solid rib bbl.,
blue/casehardened finish, highly figured checkered walnut stock. This shotgun features a single brass bead
front sight on a smooth solid concave rib. Trulock choke tube system (skeet/improved cylinder installed), 2 3/4 inch
chambers with ejectors. The breech end sides of the barrels have a 1 inch wedge of engraved scrollwork. The top breech end
of the left barrel is marked “RBL LAUNCH EDITION 20ga 2 3/4” and the one line New Britain address on the right barrel. Casehardened
action with blue remaining parts. The action, break lever and trigger guard are nicely floral scroll engraved with “RBL” in a banner on the bottom. The
water table is marked with the three line model/address marking. Dual gold washed triggers, tang mounted automatic safety and mounted with a nicely figured fancy multi-point walnut checkered
forearm and straight grip stock with Kick-Eez recoil pad. Includes CSM cloth covered takedown case, 3 extra choke tubes, leather pouch, choke tool, snap caps, oiler, shooting glasses, wood cleaning
rod, and rod heads. Stock measurements are: drop at comb 1 1/2 inches; drop at heel 2 inches; length of pull 15 3/8 inches.
CONDITION: Excellent overall with 99% original blue and casehardened finish, scattered light handling marks, sharp checkering, attractive grain, and some small scattered dings on the wood.
Mechanically excellent. Case is good with scuffs on the leather corner protectors, and wear on the straps.
Estimate: 2750 - 3750
LOT 360
Factory Engraved Winchester
Parker Reproduction 28 Gauge
Side by Side Shotgun with
Case - Serial no. 28-02573, 28
gauge, 26 inch solid rib bbl., blue/
casehardened finish, walnut stock.
Manufactured in the 1980s to
be a faithful reproduction of the beloved Parker side by side shotgun.
Single brass bead sight, standard barrel markings, 2 3/4 inch chambers with
ejectors, “IMP CYL/MOD” marked chokes, single selective trigger, and a tang
mounted safety switch. Standard “D” grade engraving with hunting dogs on the sides, three pheasants on the underside, and
the balance engraved in a fine scroll motif. Fancy checkered forearm and buttstock with an engraved skeleton buttplate over a
checkered bare butt. Stock measurements are: 1 1/2 inch drop at comb; 2 1/4 inch drop at heel; 14 inch length of pull. With leather bound Parker Reproduction takedown case and snap caps.
CONDITION: Very good with 95% original blue finish, small patch of pitting on the right barrel, handling marks, and some small nicks. The receiver has 60% of the original case colors with the balance a bright silver patina. The wood
is also very good with numerous small scratches and dings throughout. Mechanically excellent. Case is good with scuffs and scratches on the exterior and some damage to the corners.
Estimate: 1700 - 3500
297

BOTH SIDES PICTURED
LOT 361
Exceptional Factory Engraved Gold Inlaid Ithaca
Knick $5,000 Grade Single Barrel Trap Shotgun - Serial no. 240405709, 12
gauge, 32 inch vent rib bbl., blue/casehardened finish, highly figured checkered
walnut stock. Manufactured in 1977. Dual white bead sights on the raised, matte rib, 2 3/4
inch chamber with automatic ejector, jewelled flats,
ejector and lug, “$5000.00 GRADE” marking, full choke,
and elaborately engraved block with “ITHACA GUN CO.” banners. Casehardened action with matching
serial number and grade marking, and gold washed trigger. The action features full coverage flowing
scroll engraving, punch dot texture, and brilliant high relief gold inlaid game bird scenes of pheasants
on the right, single quail on the underside, a woodcock on the trigger guard, and ducks on the left side.
Fancy figured checkered beavertail forearm with engraved fittings, flourishes of light engraving on the interior forearm hardware,
matching serial number and grade marking, and checkered pistol grip stock with fancy scalloped borders, checkered flats, fluted
grip cap, blank initial shield, and solid rubber recoil pad. Includes Browning (Browning nameplate removed) takedown case. Stock
measurements are: drop at comb 1 7/16 inches; drop at heel 1 3/4 inches; length of pull 14 1/2 inches.
CONDITION: Excellent with 95% plus original blue finish on the barrel, small bright scratch at the muzzle, and mild handling marks. The action has 99% dark original case colors with
crisp, detailed engraving, bold gold inlays, and some mild wear on the face of the bright gold washed trigger. The wood is also excellent with crisp checkering, attractive grain, and a
few mild scratches and dings. Mechanically excellent. Case if excellent with some exterior storage marks.
Estimate: 6000 - 9000
Collector’s Fact
According to L.C. Smith Shotguns by
Brophy, only 484 Grade 5 shotguns
were manufactured before 1913.
BOTH SIDES PICTURED
298
LOT 362
Factory Engraved L.C. Smith/Hunter Arms Co. Grade 5E Sidelock
Ejector Side by Side Shotgun - Serial no. 200071, 12 gauge, 30 inch
solid rib bbl., blue/casehardened finish, walnut stock. Manufactured in
1903. According to the information on page 62 of “L.C. Smith Shotguns” by Brophy, only 484 Grade
5 shotguns were manufactured before 1913 when the designation was changed to the Crown Grade.
Blue steel dovetail lump barrels with dual bead
sights on the matte concave rib marked (faint)
“MADE TO ORDER BY THE HUNTER ARMS CO. FULTON, NY” with gold inlaid bar near the breech end of
the rib, 2 3/4 inch chambers with automatic ejectors, modified/full chokes, and wedges of light scroll
engraving at the breech. Casehardened action and lock plates with sculpted fences, dual checkered
triggers, and sliding tang safety. The action and locks have full coverage fine scroll engraving with floral
bouquet accents, “L.C. SMITH” banners on the locks and detailed hunting dog scenes featuring a pair of
pointers on the right and a pair of setters on the left. The dogs and backgrounds are highly detailed and are like
the work of Hunter Arms Co. Master Engraver Albert Krauss. The locks are numbered to the action. Attractive checkered beavertail forearm
with roller latch, engraved fittings, engraved interior fittings, and straight grip stock with vented Pachmayr recoil pad. Barrel and stock measurements are: bore diameter at 9
inches from breech .730/.732; minimum wall thickness .023/.022; drop at comb 1 3/8 inches; drop at heel 2 1/8 inches; length of pull 14 1/4 inches.
CONDITION: Fine. The barrels have 98% refinished blue remaining with very light rib markings and engraving, some light muzzle wear, and mid sight bead pushed into the rib. The action and
locks have an overall gray patina with small traces of original case colors visible in the protected areas, well defined, detailed engraving, and some light spotting on the repaired upper tang. The
refinished wood is also fine with crisp re-cut checkering, scattered small dings, attractive color and grain, and period added recoil pad. Mechanically excellent.
Estimate: 4750 - 7000

LOT 363
Exceptional Elaborately Factory Panel Scene Engraved Remington Model 11E Semi-Automatic Shotgun
Two Barrel Set - Serial no. 311854, 12 gauge, 28 inch vent rib bbl., blue finish, highly figured checkered walnut stock. This highly
embellished Remington shotgun features a single brass bead sight on the matte vent rib, standard barrel markings, 6 1/2 inch wedges
of fine scroll engraving on either side of the barrel extending forward from the breech, 2 3/4 inch chamber, and improved modified choke. The receiver features
broad splashes of fine leafy scroll engraving and detailed game scenes of a duck in flight on the right, and a pointer dog on the left. The model/grade is marked
on the underside above the serial number. The tangs and trigger guard are engraved to match. Nicely figured, checkered semi-beavertail forearm and pistol
grip stock with Remington hard rubber grip cap, blank initial oval, and vented White line recoil pad. Includes a 30 inch solid rib barrel with matching engraving,
2 3/4 inch chamber, and full choke, also included is an unmarked (Browning style) takedown case. Length of pull is 14 1/4 inches.
CONDITION: Exceptionally fine with 98% plus high quality refinished blue finish remaining on the receiver, crisp, detailed engraving, and some scattered light
handling marks. The refinished shortened wood is fine with a visible hairline crack on the right side of the forearm at the receiver junction, crisp checkering, and added
recoil pad. Mechanically excellent. Extra barrel is very fine with some light handling marks, and scattered small scratches. Case is excellent with storage marks.
Estimate: 1600 - 2500
LOT 364
Collector’s Lot of Three Engraved and Gold
Highlighted Ithaca Gun Co. Centennial Edition
Shotguns with Cases
-A) Ithaca Mag 10 Semi-Automatic
Shotgun - Serial no. 102OF200-1, 10
gauge, 32 inch vent rib bbl., blue finish,
walnut stock. This set of three matching
Ithaca shotguns was manufactured to
celebrate the 1880-1980 Ithaca Gun
Company Centennial. The set comprises the main
flagship shotguns of the Ithaca company including the
Mag 10, Model 51, and the Model 37. The receivers are all
factory etched to match with brilliant gold highlighting
featuring a scene of two hunters and a dog on
the right, and a scene of the Ithaca factory
and a hunter on the right. The balance has
gold highlighted leafy scroll. This particular
gun the Mag 10 has a single white bead
sight, standard barrel markings, 3 1/2 inch
chamber, full choke, multi-point checkered
forearm, and pistol grip stock with solid rubber recoil pad.
Includes the lid portion from the original box with matching
end label, and unmarked leatherette takedown case.
Length of pull is 14 1/8 inches.
CONDITION: Excellent overall with 99%
plus original blue finish, sharp checkering,
and just a few small marks on the highly
figured wood. Mechanically excellent. Case
is excellent with some storage marks.
Box portion is good.
B) Ithaca Centennial Model 51 Semi-
Automatic Shotgun - Serial no. 102OF200-5, 12
gauge, 28 inch vent rib bbl., blue finish, walnut stock.
Manufactured in 1980. White bead sight on the matte, vent rib barrel with standard markings, 2 3/4 inch chamber, and modified choke. The receiver is engraved and gold highlighted commemorating the centennial of the Ithaca
Gun Company. Multi-point checkered semi-beavertail forearm and pistol grip stock with vented rubber recoil pad. Includes the lid portion of the original box with matching end label, and unmarked leatherette case.
Length of pull is 14 1/2 inches.
CONDITION: Excellent overall with 99% plus original blue finish, light handling marks, crisp checkering, and just a few small blemishes on the wood. Mechanically excellent. Case is excellent with some storage marks. Box portion
is good. C) Ithaca Centennial Model 37 Slide Action Shotgun - Serial no. 102OF200-3, 12 gauge, 28 inch vent rib bbl., blue finish, walnut stock. Manufactured in 1980. High visibility bead sight on the matte, vent rib barrel with
standard markings, 2 3/4 inch chamber, and modified choke. The receiver is engraved and gold highlighted commemorating the centennial of the Ithaca Gun Company. Multi-point checkered slide handle and pistol grip stock with
vented rubber recoil pad. Includes the lid portion of the original box with matching end label, and unmarked leatherette case. Length of pull is 14 inches.
CONDITION: Excellent overall with 99% original flue finish, bright gold highlights, light handling marks, sharp checkering, and just a few small dings on the wood. Case is excellent with some storage marks. Box portion is good with
corner and edge wear.
Estimate: 3000 - 5000
299

300
LOT 365
Documented Factory Engraved Gold Inlaid Winchester Grand
American Model 21 Side by Side 20 Gauge Shotgun Two
Barrel Set with Case and Factory Letter - Serial no. W32999,
20 gauge, 26 inch vent rib bbl., blue finish, highly figured, carved
and checkered walnut stock. The included factory letter confirms
the model, serial number, Grand American Grade, and all of the
other major features of this Winchester. The letter further notes
the Shotgun was ordered on November 8, 1971 for Abercrombie
& Fitch, New York, work started on October 16, 1972, and an
inspection finished date of May 4, 1973. Blue, Winchester Proof
Steel chopper lump barrels with dual steel bead sights on the matte
vent rib marked “SUSIE TIMKEN” with 3 inch chambers, automatic
ejectors, “WS-1/WS-2” marked chokes, engine turned flats, and 2
1/2 inch wedges of fine scroll engraving at the breech ends. The
flat side action has standard markings on the engine turned water
table, single gold washed trigger with selector and automatic
sliding tang safety with “SAFE” marking. The action has full coverage
21-6 factory engraving with copious amounts of feathery flowing
scroll surrounding detailed gold inlaid dog and bird scenes with
a pointer on the right, setter on the left, and a pair of pheasants
on the trigger plate. The tangs and trigger guard are engraved to
match with a gold inlaid bust of a dog on the trigger guard face.
Fancy figured American walnut skeet style beavertail forearm
and straight grip stock with factory 21-B fleur de lis relief carved
accents, scroll borders, engraved fittings, blank initial oval, and
leather wrapped recoil pad. The second barrel is numbered to the
gun with a “2” identifying stamp on the lug, matching engraving
and rib marking, 3 inch chambers, “MOD/FULL” marked chokes,
and matching forearm. Includes a factory leather bound takedown
case for the set with wine colored interior, Winchester interior label,
and zippered outer canvas cover. Stock measurements are: drop at
comb 1 7/16 inches; drop at heel 2 1/16 inches; length of pull 14
7/8 inches. The factory letter lists the original stock dimensions as:
drop at comb 1 1/4 inches; drop at heel 2 1/8 inches; and
length of pull as 13 inches.
CONDITION: Exceptionally fine with 99% original blue finish
remaining, some light scattered handling marks, and sharp, detailed
engraving. The wood is very fine with crisp checkering, a few
very small scattered dings, and matching replacement buttstock.
Mechanically excellent. Extra barrel and forearm are also excellent
with some scattered light handling marks. Case is excellent with
some exterior scuffs and storage marks.
Estimate: 25000 - 35000

301

302
LOT 366
Scarce Factory Engraved Gold Inlaid Cased Winchester Parker
Reproduction A1 Special Grade Side by Side Shotgun 28 Gauge/.410
Combination Three Barrel Set - Serial no. 28-044, 28/410 gauge, 28 inch
solid rib bbl., blue/casehardened finish, highly figured checkered walnut
stock. Introduced to the Parker Reproduction line in 1988. The chart on
page 180 of “The Parker Story” by Gunther, Mullins, Parker, Price, and Cote
lists only 16 28 gauge/.410 bore combination sets manufactured with
even fewer of these being 3 barrel sets. The 28 gauge barrel sets feature
single brass bead sights on the concave matte ribs, standard barrel and
rib markings, 2 3/4 inch chambers with automatic ejectors, “MOD/FULL”
and “Q1/Q2” marked chokes, 2 1/4 inch wedges of fine scroll engraving
and gold inlaid bands at the breech end. The barrel flats and water table
are brilliantly engine turned. The casehardened action features the correct
lightening cuts in the water table, sculpted fences, single selective trigger,
and automatic sliding tang safety with gold inlaid “SAFE” marking. The
action features full coverage floral and scroll engraving surrounding
detailed game scenes of a pair of setters on the right, pointers on the
left, another pair of pointers on the underside, and a setter with a quail
in its mouth on the trigger plate. The sides of the action have gold inlaid
“PARKER BROS” markings. The trigger guard has decorative diamond
piercings with a small woodcock scene in the center, and gold inlaid serial
number on the tang. The break lever is also pierced through in a scroll
pattern. Nicely figured checkered walnut splinter forearm with fancy scroll
borders, engraved fittings, raised relief carved fleur de lis accents in an
behind the finely checkered flats, blank initial oval, and engraved blue
steel buttplate over a checkered bare butt. The second 28 gauge barrel set
is 26 inches long. The .410 barrel set is also 28 inches long with matching
engraving and gold inlay, matching forearm, 3 inch chambers, and “IMP.
CYL/MOD” marked chokes. Includes a leather bound takedown case with
oak interior trim for the complete set with oil bottle, two sets of snap caps,
and canvas and leather case cover. Stock measurements are: drop at comb
1 5/16 inches; drop at heel 2 1/16 inches; length of pull 14 1/8 inches.
CONDITION: Excellent overall with 99% bright original blue finish on the
barrels, some scattered light handling marks, 97% original vibrant case
colors on the action with some silvering on the upper tang, and crisp
engraving. The wood is also excellent with just a few scattered light
handling marks, and crisp checkering. Mechanically excellent. Extra barrel
sets are also excellent. Case is excellent with some small dings on the
leather and interior wood. An incredibly rare sub-gauge A1
Special three barrel set!
Estimate: 25000 - 35000

Collector’s Fact
According to The Parker Story
by Gunther, Mullings, Parker,
Price and Cote, only 16 sets
of this configuration were
manufactured.
303

BOTH SIDES PICTURED
LOT 367
Engraved Gold Inlaid Connecticut Shotgun Mfg.
Model 21 Side by Side 20 Gauge Shotgun with
Case - Serial no. W38442, 20 gauge, 30 inch vent
rib bbl., blue finish, walnut stock. This highly attractive
shotgun features dual white bead sights on the matte, vent rib barrels with standard
marking, chambers marked and measured and 2 3/4 inches, automatic ejectors, and “IMP. CYL/L-MOD.” marked
chokes. The flat sided action is a highly polished blue with flush gold inlaid bird scenes of woodcock and ruffed grouse
on the sides and a single pheasant on the underside. Fitted with a gold washed single trigger and manual sliding tang
safety. Checkered, fancy figured, beavertail forearm with ebony tip insert, and pistol grip stock with blue steel grip cap,
blank initial oval, and solid Decelerator recoil pad. Includes a leather bound factory takedown case with oak trim, two snap
caps, oil bottle, and two piece cleaning rod. Stock measurements are: drop at comb 1 1/4 inches; drop at heel 1 1/2 inches;
length of pull 14 inches.
CONDITION: Excellent with 99% bright original blue finish overall, brilliant gold inlays, and some light scattered handling marks. The wood is also excellent with
highly attractive figure, sharp checkering, and just a few small dings. Mechanically excellent. The snap cap blocks are detached with exposed staples, otherwise
the case is very good with some exterior scuffs and storage marks.
Estimate: 8000 - 13000
BOTH SIDES PICTURED
304
LOT 368
Desirable Winchester Skeet Model 21 Side by Side
Shotgun - Serial no. 13105, 12 gauge, 26 inch solid rib bbl.,
blue finish, walnut stock. Blued, chopper lump, Winchester
Proof Steel barrels with red bead front and steel mid bead
sights on the matte concave rib, 2 3/4 inch chambers with
automatic ejectors, standard markings, and “WS-1/WS-2” marked
chokes. Full blued sculpted action with standard markings
on the water table, “SKEET” marked trigger plate, blued single
trigger with selector, and manual sliding tang safety. “Kidney”
pattern checkered beavertail forearm and straight grip stock
with checkered bare butt. Stock measurements are: drop at
comb 1 1/2 inches; drop at heel 1 13/16 inches; length of pull
13 7/8 inches.
CONDITION: Excellent with 99% bright original blue finish on the barrels, some light scattered
handling marks, mild edge wear visible on the trigger guard, and thinning to a light gray patina
on the lower tang. The wood is also excellent with sharp checkering, some small scattered
dings, and attractive grain. Mechanically excellent.
Estimate: 2750 - 4250

LOT 369
Engraved Pre-World War II Winchester Model 21 Side by Side 16 Gauge
Shotgun Two Barrel Set - Serial no. 10639, 16 gauge, 28 inch vent rib bbl.,
blue finish, walnut stock. The included Cody Firearms Records Office datasheet
confirms the serial number, “Custom Built Grade”, gauge, barrel length, custom
grade wood, original stock measurements, and an inspection finished date of
June 2, 1936. Blue Winchester Proof Steel, chopper lump barrels with a single
red bead sight on the unmarked matte vent rib, 2 3/4 inch chambers with
automatic ejectors, wedges of fine scroll engraving at the breech, and chokes
marked “CYL/MOD”. The flat side action has a single gold washed trigger with
selector, and automatic sliding tang safety. The action features full coverage,
tight scroll engraving in the 21-6 style with relief engraved scenes of hunting
dogs and birds with a pointer on the right, setter on the left, and a pair
of pheasants on the trigger plate. The trigger guard is lightly engraved to
match with the initials “REG” inlaid in gold. Attractively figured, multipoint
checkered semi-beavertail forearm with ebony tip insert, straight grip stock,
blank initial oval, and checkered bare butt. Includes a second, 26 inch,
matching numbered barrel with matching engraving, rib and sights,
with 2 3/4 inch chambers, and “CYL/IMP. CYL” marked chokes. Stock
measurements are: drop at comb 1 1/2 inches; drop at heel 2 7/16
inches; length of pull 14 1/2 inches.
CONDITION: Very fine as professionally embellished and refinished
with 98% of the factory quality blue finish on the barrels, some small
scattered dings, and crisp engraving on the action. The wood is fine
with a very small hairline crack at the rear of the forearm latch, some light
chipping and hairline 1/8 inch cracks along the tangs, scattered small dings,
and crisp freshened checkering. Mechanically excellent.
Estimate: 15000 - 25000
305

Extremely Rare, Documented, One of Only Four Engraved & Gold Inlaid
Winchester Model 21 Three Barrel Set Shotgun
Collector’s Fact
This is 1 of only 4 Model 21s manufactured
in this configuration.
306
LOT 370
Rare Documented One of Only Four Ever Manufactured Engraved Gold Inlaid
Winchester Model 21 Three Barrel Set 20 Gauge Double Barrel Shotgun with
Factory Letter - Serial no. 28436, 20 gauge, 26/28 inch solid rib bbl., blue finish, walnut
stock. This is an exceptional example of an extremely rare documented one of only
four 20 gauge Winchester Model 21 shotguns in this configuration. The accompanying
factory letter states that this shotgun was manufactured on August 17, 1954 with one
26 inch “WS1/WS1” set of barrels, a 26 inch full/modified and a 28 inch full/full. The letter
further states the gun went in for minor repairs in 1968. The letter states that only four
Model 21s were made of this “nature and model”. One was made for General Eisenhower,
one for General Doolittle, one for Mr. W.A. Jones and the fourth for Mr. C.S. Jones. The
Jones shotguns were made as a matched pair and when W.A. Jones passed away he
left the gun to C.S. Jones and when he passed away this shotgun was offered for sale.
All three sets of barrels have a red bead front and steel mid bead sights on the concave
solid matte rib marked “CUSTOM BUILT BY WINCHESTER” in a panel near the breech, have
a 2 1/2 inch wedge of floral scroll engraving on each side at the breech and are marked
with a gold inlaid “1” on the rib at the breech. The skeet and full/modified barrels have 2
3/4 inch chambers, the full/full has 3 inch chambers and all three have ejectors. All three
have jeweled lugs, flats and ejectors and are numbered to the gun. The action, break
lever, trigger guard, grip cap and forearm hardware are very nicely floral scroll engraved.

A Must Have for the Serious Winchester Shotgun Collector!
In addition the sides of the action have two oval wooded scenes
with a gold inlaid pointer in one and a gold inlaid quail in the other.
The underside has a round panel with a gold inlaid quail in a wooded
scene and the trigger guard has a round panel with a gold inlaid dogs
head. The break lever has a gold inlaid “1”. The water table and breech
face are jeweled and the left side of the water table is marked “MADE
IN U.S.A. MODEL 21” over the two-line address. As mentioned above
the forearm hardware is floral scroll engraved and there is a gold
inlaid “1” on the latch. The matching serial number is marked on the
forearm hardware and on the wood. Single trigger with gold selector,
tang mounted manual safety and mounted with extra fancy 3X high
gloss walnut semi beaver tail forearm and pistol grip stock with a
solid leather recoil pad and gold initial oval monogrammed “C/S/J”.
The checkering is multi-point at the forend with a fancy bordered
break toward the rear and the grip area has fancy bordered breaks as
well. Comes with a Gun-Ho leather covered hard case with tiger skin
pattern padded fleece lining.
CONDITION: Near mint as custom built by Winchester with only
light handling/storage marks and factory replacement buttstock. A
beautiful, extremely rare documented one of only four engraved and
gold inlaid Winchester Model 21 Shotgun. A must have for the serious
Winchester collector.
Estimate: 40000 - 60000
Collector’s Fact
Also of note, 1 of the other configured sets
was made for General Eisenhower, and
another made for General Doolittle.
307

A Tremendous Offering of 20 Browning Longarms Sharing the Same Collector's Code
308
LOT 371
Rare Collector’s Set of Twenty Browning
Shotguns and Rifles -A) Browning
Model 1886 Grade I Lever Action Rifle
with Box - Serial no. 00109PT197, 45-70
Government cal., 26 inch octagon bbl.,
blue finish, walnut stock. This is a rare
collectors set of twenty Browning shotguns
and rifles that feature the same collector
number (00109) prefix in the serial number.
Manufactured in 1986 this is one of 7000
Model 1886 Grade I rifles produced
by Browning. Standard markings and
features. Complete with factory box
numbered to the gun.
CONDITION: Near new, with only the
slightest handling marks. The box is very
good. B) Engraved and Gold Inlaid 1
of 3000 Browning Model 1886 High
Grade Lever Action Rifle with Box -
Serial no. 00109PT697, 45-70 Govt. cal., 26
inch octagon bbl., blue/satin finish, walnut
stock. Manufactured in 1986. Standard
1 of 3000 Model 1886 High Grade rifle
markings and features, including the gold
inlaid moose and buffalo scenes amid
floral scroll and punch dot engraving on
the sides of the receiver. Complete with
factory box numbered to the gun.
CONDITION: Near new, with only the
slightest handling marks overall with a
few scattered minor scratches contained
to the left side of the forearm. The box
is very good. C) Browning Model 71
Grade I Lever Action Carbine with
Box - Serial no. 00109PR1C7, 348 Win cal.,
20 inch round bbl., blue finish, walnut
stock. Manufactured in 1987 this is one of
4000 Model 71 Grade I carbines produced
by Browning. Standard markings and
features. Complete with factory box
numbered to gun.
CONDITION: Near new, with only the
slightest handling marks. The box is very
good. D) Signed Engraved and Gold
Inlaid Browning Model 71 High Grade
Lever Action Rifle with Box - Serial
no. 00109PR6R7, 348 Win cal., 24 inch
round bbl., blue/satin finish, walnut stock.
Manufactured in 1987 this is one of 3000
Model 71 High Grade rifles produced
by Browning. Standard markings and
features, including the gold inlaid moose
and buck in panels with wooded scenes
and floral scroll engraving on the receiver.
The left side of the receiver is signed by
the engraver: “T. Naka”. Complete with the
factory box numbered to the gun.
CONDITION: Near new, with only the slightest handling. The box is very good. E) Signed Engraved and Gold Inlaid Browning Model 71 High Grade Lever Action Carbine with Box - Serial no. 00109PR6C7, 348 Win cal., 20
inch round bbl., blue/satin finish, walnut stock. Manufactured in 1987 this is one of 4000 Model 71 High Grade carbines produced by Browning. Standard markings and features including the gold inlaid moose and buck in panels
as well as floral scroll engraving on the receiver. The left side of the receiver is signed “T. NAKA”. Complete with factory box numbered to the gun.

CONDITION: Near new, with only the
slightest handling marks. The box is very
good. F) Signed Engraved and Gold
Inlaid 1 of 3000 Browning Model
1886 High Grade Lever Action Saddle
Ring Carbine with Box - Serial no.
00109NY6C7, 45-70 Govt. cal., 22 inch
round bbl., blue/satin finish, walnut stock.
Manufactured 1992. Standard Model
1886 High Grade carbine markings and
features, including the gold inlaid bucks
and bears in wooded mountain scenes
and floral scroll engraving on the sides of
the receiver. The left side of the receiver is
signed by the engraver: T. Mori. Complete
with shipping box and factory box
numbered to the gun.
CONDITION: Near new, with only the
slightest handling marks. The box is very
good. G) Browning Model 71 Grade
I Lever Action Rifle with Box - Serial
no. 00109PR1R7, 348 Win cal., 24 inch
round bbl., blue finish, walnut stock.
Manufactured in 1987 this is one of
3000 Model 71 Grade I rifles produced
by Browning. Standard markings and
features. Complete with factory box
numbered to the gun.
CONDITION: Excellent, with 99% plus
original blue finish with barely noticeable
extremely limited and light spotting on
the barrel. The stock is near new with
only the slightest handling marks. The
box is excellent. H) Browning Model
65 Grade I Lever Action Rifle with
Box - Serial no. 00109PN167, 218 BEE cal.,
24 inch round bbl., blue finish, walnut
stock. Manufactured in 1989 this one of
3500 Model 65 Grade I rifles produced by
Browning. Standard markings and features.
Complete with factory box
numbered to the gun.
CONDITION: Near new, with only the
slightest handling marks. The box is very
good. I) Signed Engraved and Gold
Inlaid Browning Model 65 High Grade
Lever Action Rifle with Box - Serial
no. 00109PN667, 218 bee cal., 24 inch
round bbl., blue/satin finish, walnut stock.
Manufactured in 1989 this is one of 1500
Model 65 High Grade rifles produced by
Browning. Standard markings and features,
including the gold inlaid coyote and lynx
and floral scroll engraving on the sides of
the receiver. The left side of the receiver is
signed by the engraver “T. Naka”. Complete
with factory box numbered to the gun.
CONDITION: Near new, with only the slightest handling marks with a couple barely noticeable minor scratches on the buttstock. The box is fine. J) Browning Model 53 Lever Action Rifle with Box - Serial no. 00109NM3F7, 32-20
cal., 22 inch round bbl., blue finish, walnut stock. Manufactured in 1990 this is one of 5000 Model 53 rifles produced by Browning. Standard markings and features. Complete with factory box numbered to the gun.
CONDITION: Near new, with only the slightest handling marks. The box is very good. K) Browning Model 52 Sporter Bolt Action Rifle with Box - Serial no. 00109NZ496, 22 LR cal., 24 inch round bbl., blue finish, walnut stock.
Manufactured in 1991 this is one of 5000 Browning Model 52 rifles produced by Browning. Standard markings and features. Complete with factory box numbered to the gun.
309

310
CONDITION: Near new, with only the
slightest handling marks. The box is very
good. L) Browning Model 1886 Grade
I Lever Action Carbine with Box - Serial
no. 00109NY1C7, 45-70 Government cal.,
22 inch round bbl., blue finish, walnut
stock. Manufactured in 1992 this is one
of 7000 Model 1886 Grade I carbines
produced by Browning. Standard
markings and features. Complete with
factory box numbered to the gun.
CONDITION: Near new, with only
the slightest handling marks overall
with a minor ding on the underside
of the forearm. The box is very good.
M) Engraved and Gold Inlaid
Browning Model 12 Grade V Slide
Action Shotgun with Box - Serial
no. 00109NM972, 28 gauge, 26 inch
vent rib bbl., blue finish, walnut stock.
Manufactured in 1990 this is one of 4000
Model 12 Grade V 28 gauge shotguns
produced by Browning. Standard
markings and features including the gold inlaid dog on point,
ducks in a marsh scene and floral scroll and punch dot engraving
on the receiver. 2 3/4” chamber, choked
modified, with a length of pull of 14”.
Complete with factory box numbered to
the gun.
CONDITION: Near new, with only the slightest handling overall
with a few light surface scratches on the buttstock. The box is
very good. N) Engraved and Gold Inlaid Browning Model
12 Grade V Slide Action Shotgun with Box - Serial no.
00109PN932, 20 gauge, 26 inch vent rib bbl., blue finish, walnut
stock. Manufactured in 1989 this is one of 8000 Model 12 20
gauge shotguns produced by Browning. Standard Grade V
markings and features with gold inlaid dogs on point and marsh
scenes amid floral scroll and punch dot engraving on the receiver,
2 3/4” chamber, choked modified, with a length of pull of 14”.
Complete with shipping box and factory
box numbered to the gun.
CONDITION: Excellent with 99% original
blue finish and only slight handling marks overall, some mild
slide wear, (mainly on the slide bar), and a few scattered mild
scratches on the buttstock. The box is good. O) Browning
Model 12 Grade I Slide Action Shotgun with Box - Serial no.
00109NM872, 28 gauge, 26 inch vent rib bbl., blue finish, walnut
stock. Manufactured in 1990 this is one of 8500 Model 12 Grade I
28 gauge shotguns produced by Browning. Standard markings and
features. 2 3/4” chamber, choked modified, with a length of pull of
14”. Complete with factory box numbered to the gun.
CONDITION: Excellent, with 99% original finish with some minor
slide wear (mainly on the arm) and some slight handling marks.
The box is very good.
P) Browning Model 42 Grade I Slide
Action Shotgun with Box - Serial no.
00109NZ882, 410 gauge, 26 inch vent rib bbl., blue finish, walnut
stock. Manufactured in 1991 this is one of 6000 Model 42 Grade I
shotguns produced by Browning. Standard markings and features.
2 1/2 and 3” chamber, choked full, with a length of pull of 14”.
Complete with factory box numbered to the gun.
CONDITION: Excellent with 99% original blue remaining, showing
some minor wear on the magazine tube and slide bar. Sharp
checkering on the wood and only slight handling marks. The box
is very good.

Q) Browning Model 12 Grade I Slide
Action Shotgun with Box - Serial
no. 00109PN832, 20 gauge, 26 inch
vent rib bbl., blue finish, walnut stock.
Manufactured in 1989 this is one of 8000
Model 12 Grade I 20 gauge shotguns
produced by Browning. Standard
markings and features. 2 3/4” chamber, choked
modified, with a length of pull of 14”. Complete
with factory box numbered to the gun.
CONDITION: Excellent, with 99% original finish
remains with some light handing marks and some
mild slide wear, (mainly on the slide arm). The
box is very good. R) Engraved and Gold Inlaid
Browning Model 42 High Grade
Slide Action Shotgun with Box -
Serial no. 00109NZ982, 410 gauge, 26
inch vent rib bbl., blue finish, walnut
stock. Manufactured in 1991 this is one
of 6000 Model 42 High Grade shotguns
produced by Browning. Standard markings and
features, including the gold inlaid dogs on point in
a wooded scene and 4 ducks in a marsh scene and
floral scroll engraving on the sides of the receiver.
2 1/2” and 3” chamber, choked full, with a length of
pull of 14”. Complete with factory box numbered
to gun.
CONDITION: Excellent with 99% original blue finish
remaining, showing some minor wear
on the magazine tube from cycling the
action and some light handling marks.
Sharp checkering on the wood. The
box is very good. S) Signed Engraved
and Gold Inlaid 1 of 1000 Browning
Model 1895 High Grade Lever Action Rifle -
Serial no. 00109PV687, 30-40 cal., 24 inch round
bbl., blue/satin finish, walnut stock. Manufactured
in 1985 this is one of 1000 Model 1895 High Grade
rifles produced by Browning. Standard markings
and features, including the gold inlaid buck and
mountain lion in wooded scenes on the receiver as
well as floral scroll engraving. The right side of the
receiver is signed by the engraver T. Mori.
CONDITION: Near new, with only the slightest
handling marks with a few scattered minor nicks in
the overall sharp checkering. T) Signed Engraved
and Gold Inlaid 1 of 1000 Browning Model
1895 High Grade Lever Action Rifle - Serial no.
00109PW687, 30-06 cal., 24 inch round bbl.,
blue/satin finish, walnut stock. Manufactured
in 1984, this rifle has the standard High
Grade markings and features, including
the gold inlaid bear and moose on the sides of the
receiver. The right side of the receiver is signed by
the engraver T. Naka.
CONDITION: Excellent. The barrel retains 99% plus
original blue finish with only the slightest handling
marks. The receiver has some mild scratches. The
wood is also excellent with a few minor
handling marks.
Estimate: 20000 - 30000
311

The Estate of William T. Prichard
312
LOT 372
Colt Model 1900
Sight Safety
Semi-Automatic
Pistol - Serial no.
1839, 38 ACP cal.,
6 inch round bbl.,
blue finish, walnut grips. Manufactured in 1902. Blade front and
notch rear sights, the latter in the original “sight safety” configuration,
installed on a matching numbered slide with rear serrations, the
two-line/two-block “BROWNING’S PATENT” markings on the left side ahead of the
circled Rampant Colt, and caliber markings on the right. Fitted with a nitre blue trigger,
casehardened spur hammer, smooth hardwood grips, and a correct nickel plated
magazine with “PAT’D. SEPT 9. 1884” marked on the base plate.
CONDITION: Fine, with 60% of the original blue finish, showing areas of brown patina,
bright edge wear, scattered spotting and mild scratches and handling marks. Some
heavier wear and tool marks are present on the top sides of frame around the pins. The
refinished grips are very good, with some dings and wear. Mechanically excellent.
Estimate: 3000 - 4500
LOT 373
Pre-War Colt Super .38
Semi-Automatic Pistol
- Serial no. 9034, 38 Colt
Super Auto cal., 5 inch round
bbl., blue finish, walnut grips. Manufactured
in 1930. Half moon front and fixed square notch rear sights, with
the two-line address and patent dates on the left side of the
slide, the model marking and Rampant Colt on the right, and the
matching number beneath the firing pin stop. The frame is marked
“1/VP” and “60” on the trigger guard, with a wide hammer, short, checkered milled
trigger, long grip safety, arched checkered mainspring housing, checkered grips and a
correct two-tone magazine.
CONDITION: Excellent with 95% plus bright original blue finish, small areas of light edge
wear, some small surface scratches, and handling marks. The grips are also excellent with
sharp checkering, and some small scattered dings. Mechanically excellent.
Estimate: 2750 - 4250
LOT 374
Exceptional Quality Miniature Colt
Government Model Semi-Automatic
Pistol with Case - Serial no. C92721, 1 5/8
inch round bbl., bright finish, hardwood
grips. Constructed at about 1:3 scale,
this is a finely made copy of the famous
Colt Government Model Pistol. While not
capable of firing (the barrel is obstructed,
the breech face is solid, and the firing pin
can not physically reach the cartridge),
the overall level of detail in markings and
function is very high. Measuring 2 3/4
inches long and 1 3/4 inches tall, the pistol
has a full set of commercial markings and
a serial number that dates to 1917, with a
flat top rear sight, wide hammer, short grip
safety, checkered grips with diamond flats
and a lanyard ring base magazine. Included
with the pistol is a fine hardwood case with a French-cut interior for the pistol and the three included inert rounds,
which bear miniature “FA/36” headstamps around the faux primers.
CONDITION: Very fine, with an overall bright appearance, showing mild patina and a small number of handling
marks. The grips show a few light dings, and the case shows some scuffing, cracks, and loose components. This
miniature pistol passes the same function checks you would give the full sized Government Model,
but does not fire.
Estimate: 2000 - 3500
LOT 375
Colt Sporting
Model
1902 Semi-
Automatic
Pistol - Serial
no. 7101, 38 ACP
cal., 6 inch round bbl., blue finish, hard rubber grips. Manufactured
in 1903. Two-block, two-line Browning’s patent dates and address
followed by the circled Rampant Colt on the left side of the slide and
“AUTOMATIC COLT/CALIBRE 38 RIMLESS SMOKELESS” on the right side. With
fixed sights, niter blue trigger, checkered round knurled hammer, “COLT” banner grips,
and a later production replacement full blue magazine marked
“CAL. 38/COLT” on baseplate.
CONDITION: Very fine, retaining 75% plus original blue, scattered areas of surface
oxidation, a few small areas of light pitting, and some thinning in places. 85% vivid
original case colors remain on hammer. The grips are excellent with still crisp checkering.
Mechanically excellent.
Estimate: 2000 - 3000
LOT 376
Colt Military Model
1905 .45 ACP Semi-
Automatic Pistol - Serial
no. 2137, 45 ACP cal., 5 inch
round bbl., blue finish, walnut
grips. Manufactured in 1907. Fixed sights, with the two-line, twoblock
patent dates and address on the left side of the slide ahead
of the Rampant Colt, and the two-line caliber marking on the right.
A casehardened finish is present on the knurled round spur hammer, with a niter
blue trigger and royal blue slide catch. The frame is marked “VP” on the trigger guard,
with an unmarked factory replacement full blue magazine and checkered grips.
CONDITION: Fine, with 40% of the original blue finish, showing strong blue in the
protected areas, the underside of the frame, and on the chamber, with a mixed brown
and gray patina on the remainder, mild scratches and wear, bright wear along the
edges, and mild pitting concentrated on the leading edge of the slide. Traces of aged
storage grease are present on the magazine and on the interior. The grips are very good,
with a few mild dings. Mechanically very good.
Estimate: 1800 - 2750
LOT 377
Pre-World War II Colt
Government Model
Semi-Automatic Pistol
- Serial no. C175636, 45 ACP cal., 5 inch
round bbl., blue finish, walnut grips. Manufactured in 1934.
The matching numbered slide has the two line address and
patent dates on the left side of the slide, and the right side has
the caliber marking with the Rampant Colt. The frame is marked “W/
VP” and “60” on the trigger guard, with a flat top rear sight, checkered slide stop,
checkered hammer, trigger and mainspring housing, checkered grips, two-tone
blue magazine and a “45 COLT” marked barrel. Includes (incorrect for this pistol)
unnumbered, later style factory box.
CONDITION: Very fine with 75% plus bright original blue finish, areas of high point
and edge wear, well defined markings, scattered light spotting, and mottled blue/
gray patina on the front grip strap. The grips are also fine with small dings and bruises.
Mechanically excellent.
Estimate: 1400 - 2250

BOTH SIDES PICTURED
LOT 378
World War II U.S. Union Switch & Signal Model 1911A1 Semi-Automatic Pistol with
Holster - Serial no. 1073516, 45 ACP cal., 5 inch round bbl., dulite finish, plastic grips.
Manufactured in 1943. Blade and flat top notch sights, the “USS” monogram and “U.S. & S. Co./
SWISSVALE, PA. U.S.A.” on the left side of the slide, Robert Downie “R.C.D.” inspected frame, thin
checkered hammer, short stamped trigger, long grip safety, arched checkered mainspring housing, full checkered
plastic grips, full blue “L” marked magazine and “HS” marked High Standard barrel. Includes an exceptional period
custom made unmarked leather shoulder holster rig and extra full blue “R” marked magazine.
CONDITION: Excellent with 90% plus original dulite blued finish some scattered minor specks of pitting on top of
slide, and small handling marks. The grips are excellent with some small scattered dings. Mechanically excellent.
Holster is very fine with overall solid construction, light age cracking on the
straps, and scattered small scuffs.
Estimate: 3500 - 5000
LOT 379
World War II U.S.
Remington-Rand Model 1911A1 Semi-Automatic Pistol
with Belt Rig - Serial no. 1385598, 45 ACP cal., 5 inch round
bbl., parkerized finish, plastic grips. Manufactured in 1943.
Blade and flat top notch sights, standard slide markings, “FJA”
inspected frame, stamped trigger, thin checkered hammer,
long grip safety, checkered thumb safety, serrated slide
catch and arched mainspring housing, reinforced Keyes Fiber
grips, “R” marked full blue magazine, and a High Standard “HS”
barrel. Includes a “1942” dated Avery web belt with double magazine pouch, two extra magazines,
Milwaukee Saddlery Co. “US” embossed holster with leg tie, dated “1942”, and U.S. M-1942 Aluminum
Goods Manufacturing Co. canteen and “1942” dated cup with a “1942” dated Collette Mfg.
insulated canvas cover.
CONDITION: Excellent with 98% plus original parkerized finish remaining, small traces of visible
edge wear, some small takedown marks on the left side of the frame, and some small scattered
surface scratches. Grips are also excellent with sharp checkering and light handling marks.
Mechanically excellent. Holster and belt rig are very fine with clear markings, some light
staining and verdigris, and some scuffs and mild staining on the leather holster.
Estimate: 1800 - 2750
BOTH SIDES PICTURED
LOT 380
Identified
World
War II Case V-42 Stiletto with Inscription -
Designed by a committee of experienced men
led by then-Colonel Robert Frederick, the 1st
Special Service Force’s commanding officer, the
dagger that would become the V-42 Stiletto
(or “Force Knife” to its users) was intended to
represent the state of the art in close quarters
battle. The signature weapon of the 1st SSF, a
limited number landed in U.S. Navy hands, in
particular a batch issued to the U.S.S. Omaha.
This particular example is inscribed on the
ricasso “C. Wetsell/805-89-07/U.S.N.”. The
consignor suggests that Wetsell was Machinist’s
Mate 2nd Class Charles L. Wetsell of the U.S.S.
General J.R. Brooke, a Navy transport heavily
involved with transporting soldiers and marines
across both the Atlantic and Pacific, and suggests
that Brooke may have transported the 1st SSF to
Italy. The stiletto is 12 3/8” overall, with a 7 1/4
inch double edged hollow ground blade, bearing
the signature thumb panel and “Case” opposite
the inscription. A coat of heavy enamel paint has
been applied to the guard. The hilt is fitted with a
grooved leather washer grip, padded guard, and
skull crusher pommel. Includes a replacement
short M6 pattern sheath, with “C.M.G.” hand
marked on the back and reinforcement plates in
the tip region.
CONDITION: Excellent knife, with 95% plus of the
original blue finish, showing some mild handling
marks and a few areas of brown patina. Mild wear/flaking
is visible on the guard, with some scuffs and stains on the
otherwise fine leather.
Estimate: 3000 - 5000
313

BOTH SIDES
PICTURED
LOT 381
Outstanding U.S. Colt Transitional Model 1911 Semi-
Automatic Pistol - Serial no. 701090, 45 ACP cal., 5 inch round bbl., blue finish,
walnut grips. Also known as the Improved Model 1911A1 Pistol, the Transitional 1911s were made in 1924. While
they retained the nomenclature markings of the 1911, they were equipped with the signature features of the 1911A1
which included the dished frame sides, shortened trigger, elongated grip safety, and arched mainspring housing.
Round blade front and flat top notch rear sights, with the two-line, two-block address and patent markings divided by
the Rampant Colt logo on the left side of the slide, “MODEL OF 1911.U.S.ARMY” on the right, and “H” above the firing pin
stop plate. The frame bears the circular Walter Gordon “WTG” inspection stamp, with the short milled checkered trigger, wide
checkered hammer, long grip safety, checkered mainspring housing, “R” marked two-tone magazine, and a conjoined “HP” marked barrel.
CONDITION: Excellent, with 97% plus original blue finish, showing slight retraction wear on the barrel and light rub on the left forward slide. The grips are
also excellent with crisp checkering. Mechanically excellent. A truly exceptional 1924 Transitional M1911 that would be difficult to improve upon!
Estimate: 6500 - 9500
314
BOTH SIDES
PICTURED
LOT 382
Exceptional 1941 Production R.S. Inspected U.S. Colt Model 1911A1
Semi-Automatic Pistol - Serial no. 733187, 45 ACP cal., 5 inch round bbl.,
blue finish, plastic grips. Manufactured in 1941 and shipped to Springfield
Armory on June 28, the Robert Sears inspected Colts marked the transition point
from Colt’s high polish blue to the Parkerization treatment that would become
the standard for the rest of the war. Blade and flat top notch sights, with the
Rampant Colt bisected address and patents on the matching numbered slide,
“R.S.” stamped frame (left side and top) with “X/VP” and “69” marked trigger guard,
short milled trigger, wide hammer, checkered arched mainspring housing,
correct checkered Colt grips (hollow backs with reinforced screw holes), full
blue commercial magazine with “COLT/45 AUTO” on the base, and a “COLT 45
AUTO” barrel with a small “G” ahead of the lug.
CONDITION: Extremely fine, with 85% plus original high polish blue finish,
showing scattered areas of brown patina on the slide and grip straps, bright
edge wear, mild handling marks and light spotting. The grips are very fine,
with some scratches and dings. Mechanically excellent.
Estimate: 4000 - 6000

Outstanding National Match U.S. Springfield Rifles
BOTH SIDES PICTURED
LOT 383
Exceptional Springfield Armory “Type
1” National Match M1 Garand Semi-
Automatic Rifle with Original DCM Box
and Papers - Serial no. 5925083, 30-06 cal.,
24 inch bbl., parkerized finish, walnut stock.
This is an exceptional example of an original
and unaltered, early production, Type 1 NM
M1 rifle as manufactured by Springfield that
was sold to a gentleman in California in Feb
1957. These rifles were the very first series of
the M1 NM rifle produced and are considered very rare today as most saw
heavy use in the 1954-1960 period and later were either altered/enhanced
with accuracy upgrades or completed rebuilt by the Army into a Type 2
model. These rifles had minimal accuracy improvements at this time in
comparison to the later rifle in the 1959-1965 time frame with the standard
enhancements being the NM marked barrel, standard hand-fitted parts (without NM markings), and the hand
fitted walnut stock and hand guard set. Consequently these rifles are easy to duplicate; however, this rifle has the
original DCM papers and original shipping container from Raritan Arsenal, proving its authenticity. The receiver
markings are as follows: “U.S. RIFLE/CAL. 30 M1/SPRINGFIELD/ARMORY” over the serial number, “5925083”. The
right side of the receiver is marked “T8/F6528291”, and the barrel is marked “SA F6535448 9 55 A223A” with the
correct “P”, “M”, “T” and small DOD proof and acceptance marks. The left front portion of the exposed barrel has
the correct “NM” markings. The various parts are marked as follows: trigger housing: “658290-SA”; trigger guard:
stamped unmarked; hammer: “SA 5546008”; safety: “SA-11”; bolt: “6528287-SA/A15”; correct operating rod:
“D6535382 SA” with no NM on top of the cocking handle; bullet guide: stamped
unmarked; follower arm: unmarked; op rod catch assy: single bevel unmarked.
It has the correct hand fitted rear sight set for this rifle which is the standard
unmarked rear sight base with standard windage and elevation knobs that are
marked “DRC” and “WCE” respectively with no NM markings. The rear sight set is
fitted with the correct early style, unhooded rear aperture with the back side of
the aperture having a slight checkered pattern to dull any reflection from the sun. The gas cylinder is a late postwar
version that was hand selected for tighter tolerances and then hand fitted to the barrel. It has the wide base
and high hump gas cylinder lock, with the later four-slot gas plug that is marked “BS”. The stock and hand guard
set are the correct hand selected straight grained walnut versions that were selected for a super tight fit with no
accuracy improvements. The left side of the stock has the DOD acceptance cartouche and a single “P” proof in the
pistol grip area. It is complete with the original shipping document/invoice from Letterkenny Army Depot and
the original shipping container from Raritan Arsenal. The outside of the box is clearly marked with the NSN and
packaging information with the address label to the same individual on the shipping documents. It is complete
with the original VCI shipping sleeve dated Oct 1955 and a green GI canvas sling.
CONDITION: Excellent, with 99% plus of the original green parkerized finish overall with just a hint of wear
starting on the right side receiver rail. The breech end of the barrel is still in the white, and the chamber area is
also still in the white. The rifle appears to be unfired and has probably only been hand cycled a couple of times
over the years. The revarnished stock and hand guard set are all in very fine condition with just a couple of
very minor handling marks and clear and distinct cartouches and proofs. The box is in fine condition with clear
markings and address label with the one end that was opened missing the flap and some minor scuffing and
tears on the edges in a couple of places.
Estimate: 4750 - 6500
BOTH SIDES PICTURED
LOT 384
Exceptional U.S. Springfield Armory National Match Model 1903 Bolt
Action Rifle - Serial no. 1231700, 30-06 Springfield cal., 24 inch round bbl., parkerized
finish, walnut stock. This is a very fine representative example of a 1921 manufactured U.S.
Springfield Armory Model 1903 National Match bolt action rifle. The barrel is marked “SA/flaming
bomb/10-21” with the correct star gauge marking on the muzzle, standard blade front and adjustable rear
ladder sight with bright polished face, and no volley notch at the top of the ladder. The rear sight is fitted with
a P.J. O’Hare stamped sheet metal cover. Standard markings on the receiver ring with polished receiver rails,
polished bolt and extractor, correct block type lettering on the safety and cutoff levers, and serrated trigger.
Correct straight grip service type stock with milled barrel bands, “H” marked bayonet lug, “R” sub-inspection
mark in the cutoff recess, boxed “D.A.L” inspection mark on left side of the wrist, “T” inspection mark on the
under side of the wrist, circled “P” proof, and finely checkered trapdoor
buttplate with cleaning kit in the trap. Includes brass muzzle cover.
CONDITION: Excellent retaining 90% plus slightly thinned original
parkerized finish with visible bright wear around the muzzle end of the
barrel from the cover, scattered small handling marks, and darkened
patina on the rear sight face. The stock is also excellent with crisp
inspection marks, some small scattered dings, and light edge wear on
the buttplate. Mechanically excellent.
Estimate: 4750 - 6500
315

One of the Finest Known Springfield Model 1903 Rod Bayonet Rifles
316
LOT 385
Extremely Rare ‘Serial Number 24’ U.S. Springfield Model 1903 Rod
Bayonet Bolt Action Rifle - Serial no. 24, 30-03 cal., 24 inch round bbl.,
blue finish, walnut stock. This is the one of the finest examples of an extremely
rare, first weeks production, serial number 24, U.S. Springfield Model 1903 Rod Bayonet rifle that
was manufactured in 1903. This outstanding rifle is all original, in as issued condition, retains its
original rod bayonet configuration, and is still chambered in the original .30-03 cartridge. Between
November 1903 and January 1905, Springfield Armory manufactured approximately 74,000
Model 1903 rifles in the distinctive rod bayonet configuration. Several hundred Rod Bayonet
Model 1903 rifles were issued to the corps of cadets at the U.S. Military Academy at West Point
and to some regular army units in Alaska, and a few rifles were provided to some state governors
and small arms and ammunition manufacturers. However, before the rod bayonet Model 1903
rifles became general issue to the rest of the Army and state militia, President Theodore Roosevelt
examined a rod bayonet Model 1903 and notified the Chief of Ordnance that “I think that ramrod
bayonet about as poor an invention as I ever saw.” On January 11, 1905, the Chief of Ordnance
stopped all production of Rod Bayonet rifles and immediately proceeded to redesign the rifle
to accept a 16-inch knife bayonet. The approximately 74,000 Model 1903 rod bayonet rifles
produced prior to January 11, 1905, both still at Springfield Arsenal, those issued to regular army
units, the West Point cadets, as well as some of those supplied to various state governors, were
subsequently modified to accept the Model 1905 Bayonet. Experts today estimate that fewer
than 100 original Model 1903 rod bayonet rifles escaped modification to the 1905 configuration,
with many now being in public museums and only a few original unaltered examples actually
in private collections. An original, unmodified Model 1903 rod bayonet rifle is one of the rarest
and most difficult to obtain of all U.S. martial arms. This rifle still retains its original blue finish on
the barrel, front and rear sight bases, barrel bands, trigger guard and floor plate, and the original
oil-quenched, casehardened finish on the receiver. The top of the receiver is roll-stamped in fourlines
with serifed letters as follows: “U.S./SPRINGFIELD/ARMORY/MODEL 1903” over serial number
“24”. The markings on the cut-off and safety lock also utilize serifed letters. The barrel is correctly
not marked or dated and is fitted with the special one-piece front sight base, with the double
holes through the base, single locating pin through the center of the base, and the early style
rear sight base with Model 1902 Krag rear sight with peep plate. The base pins on the rear sight
base and the front sight stud are milled flush with the sight base, and both retain their original
arsenal blued finish; neither the rear sight base or the front sight stud have ever been removed
from the barrel. The bolt has the correct/original arsenal polished body with blued handle and
fiery niter blue extractor. It is fitted with the second version safety lock that has a more squared
off shape and the serifed letters as adopted in 1904 and fitted to most rod bayonet Model 1903
rifles. It has been subsequently fitted with the upgraded second variation bolt sleeve that is blued
with a dark, casehardened finish on the safety lock and cocking piece. The “ON” side of the cutoff
is polished bright. In addition to the distinctive 23 1/2 inch rod bayonet, the rifle has special
bayonet stud and catch, special upper barrel band with flat-sided stacking swivel, one-piece
lower barrel band, smooth buttplate with small, Krag style trap with assembly number (81) on the
inside. It has the smooth, pointed trigger. The follower is the second style with curved front end.
The rifle has the early 1901 style trigger guard installed on some rod bayonet rifles that allows the
rifle to fire when the trigger is pushed forward from
behind. This rifle still retains it original beautiful black walnut
stock and handguard, with both having their original oil finish.
The stock lacks the reinforcing bolts found on later production
Model 1903 rifles and, the left side of the stock wrist is stamped
with the final inspection mark consisting of the script initials
“JSA” over the date “1903” within a rectangle. A small number
“8” sub-inspection mark and an encircled, script “P” proof mark
are stamped on the underside of the stock behind the trigger
guard. The rifle still retains its original and very distinctive flat
handguard with the internal spring clip attached by two rivets.
CONDITION: Excellent with 98% plus of the original blued and
oil-quenched casehardened finish remain overall, with just a
hint of blue flaking on the trigger guard and floorplate. The
stock and hand guard are also both in excellent condition,
retaining a beautiful matching medium brown color overall
with crisp cartouches and proofs. The only notable marks are a couple of very minor, light
pressure dents on the left side; one directly behind the cartouche and a second one directly in
front of the buttplate. (The middle barrel band also has marred the stock). This is one of the finest
U.S. Model 1903 Rod Bayonet rifle that we have ever had the privilege to offer for sale. The superb
condition and originality of this rifle is impeccable and would be difficult to improve upon or
upgraded! Certainly for the discriminating, high end collector that wants an early extraordinary
U.S. Springfield Model 1903 ramrod bayonet rifle for their collection.
Estimate: 40000 - 60000

LOT 386
Rare Smith & Wesson Mark II 9mm Semi-Automatic Light
Rifle with Accessories and Factory Letter - Serial no. 1561,
9 mm para cal., 9 1/2 inch fluted bbl., blue finish, polymer stock.
Developed in the late 1930s and early 1940s, the Smith & Wesson Light Rifle, aka the Model 1940, was
conceived in response to a request by Great Britain for a lightweight semi-automatic rifle. S&W’s response
was mechanically novel, especially in the fully ambidextrous magazine
well/ejector chute; this feature was relatively ahead of its time, it was
generally outclassed by other carbines and submachine guns on the
market, particularly the U.S. M1 Carbine. In competition, it squared off
against the now-iconic U.S. M1 Carbine, with the additional handicap of
severe ammunition trouble. The Light Rifle had been developed using
commercially available 9mm Parabellum ammunition, which was not a
chamber pressure match for the military-contract ammo issued during
the test. S&W revisited the drawing board, resulting in the Mark II, which
integrated a machined steel sleeve around the receiver, which acted as
a reinforcement as well as a positive bolt-blocking safety. This was not
enough to save the project, and the British shelved the Light Rifle, demanded a
refund on their advance, and, once the pressing matter of World
War II was resolved, took their stock of unwanted Light Rifles and
threw them in the English Channel. According to the Smith &
Wesson historian, in 1974 Smith & Wesson found a limited number
of unfired 1940 light rifles packed in crates. These were classified
as Curio & Relic items and sold as collector’s pieces. According to
Jinks on page 240 of “History of Smith & Wesson,” 137 Mark I rifles
were found along with 80 Mark II rifles. Many of these survivors are
branded with a prominent metal plate (absent on this example)
Collector’s Fact
According to Smith &
Wesson historian Roy
Jinks, only 80 Mark II
rifles still exist.
declaring them unsafe to fire, which appears to have been removed from this example. Blade front and elevation adjustable
notch rear sights, with a fluted barrel, ribbed safety, signature combination magazine well/ejector port, and a smooth stock with a ribbed buttplate
numbered to match the rifle. Includes a non-factory storage case, correct original leather sling, three extra magazine, spanner wrench, and manual.
CONDITION: Excellent with 99% bright original blue finish remaining, some scattered light surface scratches, and a few small scattered handling marks on the buttstock. Mechanically excellent.
Estimate: 8500 - 13000
BOTH SIDES PICTURED
BOTH SIDES PICTURED
LOT 387
Outstanding Documented Original World War II
Configuration, Springfield Armory M1C Sniper Rifle with Scarce M81 Scope - Serial no. 3310464, 30 06 cal., 24 inch bbl., parkerized
finish, walnut stock. This Springfield Armory M1C sniper rifle was manufactured in 1945 with scarce M81 Telescopic Sight in substantially original World War II
configuration. This rifle is accompanied by a letter from the Garand Collector Association (GCA) M1C Verification Service signed by David McClain. The letter states that M1 receiver serial
number 3310464 is an authentic M1C receiver. The rifle receiver was serial numbered in November 1944. The rifle remains in the 1945 configuration with most of the correct World War II M1C
components and shows no indication of having being overhauled during the Korean War. The barrel is marked “3 S A 4 45” and stamped with a “P” proof and punch-mark. The barrel chamber is bright
and the gas port has not been chromed. The forearm is secured by a solid pin. The rifle has the World War II lockbar rear sights, “-19SA” bolt, and “D35382 9 SA” operating rod with no relief cut. The trigger
assembly has a milled trigger guard with “-18-SA” trigger housing which may indicate the trigger assembly is not original to the rifle. The stock, hand guard and forearm are oiled walnut. The left side of the stock is stamped with a
boxed “S.A./N.F.R.” final inspection mark followed by the Ordnance escutcheon. A encircled, serif, “P” proof mark is stamped on the inside of the pistol grip. A tiny Ordnance escutcheon is stamped on the bottom of the pistol grip.
The left side of the receiver is fitted with a parkerized scope bracket secured by three screws and staked on the inside of the receiver. The bottom of the bracket is hand-stamped with the rifle serial number “3310464”. The “3”s on
the bracket have a flat top that indicates the bracket was serial numbered at the Griffin & Howe factory when the bracket was installed. The rifle has a scarce blued Lyman M81 Telescopic Sight with fine wire cross hairs, sliding sun
shade and rubber eyepiece. The left side of the scope tube is roll-stamped: “TELESCOPE M81/SERIAL NO. 34032/STOCK NO. 84373”. Drawing numbers are stamped on the scope tube, adjustment knob platforms, and adjustment
knob covers. Approximately 1200 M81 scopes were manufactured and some M81 scopes were installed on 1945 production M1C rifles. The scope has a blued Griffin & Howe mount and rings. The right side of the mount is stamped
with the serial number “3714200” with round top “3” that indicates the mount was numbered at Springfield Armory. Few, if any, M1C rifles left Springfield Armory with matching scope mounts. The barrel is fitted with a “Heavy”,
SA-marked M2 Flash-Hider. The stock has a russet leather “K/LINE” lace-on cheekpiece.
CONDITION: Excellent. The rifle retains 98% of the Springfield Armory gray-green parkerized finish with minimal handling and storage wear. The M81 Telescopic Sight and G&H mount retain 98% of the original blue finish. The scope
optics are excellent. The stock, forearm and handguard are all in excellent condition with crisp inspection and proof marks. The leather cheek piece is in excellent condition with crisp markings. With the exception of the trigger
assembly the rifle has all of the correct components of a unaltered, 1945 configuration M1C rifle. This is an excellent example of an M1C sniper rifle with GCA M1C Verification letter.
Estimate: 7500 - 12000
317

318
LOT 388
U.S. Remington-Rand/Springfield Armory Model
1911A1 National Match Semi-Automatic Pistol - Serial
no. 1503214, 45 ACP cal., 5 inch round bbl., parkerized
finish, walnut grips. This is an exceptional example of a
U.S. Model 1911A1 National Match pistol as supplied by
the U.S. Army for the Camp Perry National Matches. These pistols were produced on
standard WWII frames (this one is a Remington-Rand), fitted with a Colt slide with the
two-line address and patent marking on the left side separated by the Rampant Colt
logo, and numbered to match the frame with partial serial number “3214” on the right. Fitted with
the serrated long aluminum trigger, checkered front grip strap, new checkered walnut grip panels,
arched serrated mainspring housing and serrated Patridge blade front and fully adjustable Micro rear
notch sights. The left side of the frame is marked with a “F.J.A.” inspectors mark over a single “P” proof
by the magazine release. The right side of the frame has standard property, model and serial number
markings as well as a single “T” on the grip frame, “SA” below the model
marking, and “NM” on the trigger guard bow. The top of the barrel is marked
“45 AUTO” and “NM7790313” and serialized to match the frame and slide.
The front of the barrel is fitted with the standard NM barrel bushing which is
marked “7267718” over “NM”.
CONDITION: Very fine as arsenal refurbished and upgraded to National Match
specifications by the U.S. Springfield Armory with 99% of the dark post-war
parkerized finish remaining, some light handling marks, slightly light slide
markings, and small takedown mark on left side of frame. Grips are excellent with sharp checkering.
Mechanically excellent.
Estimate: 2250 - 3500
LOT 389
World War II U.S. Colt Model 1911A1 Semi-Automatic
Pistol with Holster - Serial no. 1174395, 45 ACP cal., 5
inch round bbl., parkerized finish, checkered plastic grips.
Manufactured in 1943. Fixed sights, with the two line, two block
Colt address and patent markings on the left side of the slide,
divided by the Rampant Colt, and “P” on top. “G.H.D.” inspected
frame, with “8/VP” and “90” on the trigger guard. Checkered
stamped trigger, wide hammer, slide catch and thumb safety,
arched mainspring housing and reinforced Colt grips, blued
“COLT 45 AUTO” marked barrel, and unmarked full blue
magazine. Includes “US” embossed “1943” dated Boyt
leather shoulder holster and letter of provenance stating
the pistol was issued to the individuals (names redacted)
father during his time serving in the U.S. Coast Guard.
CONDITION: Excellent with 95% original parkerized finish, some
light edge wear small takedown marks on left side of frame, and handling marks.
The grips are also excellent with sharp checkering. The firing pin stop, pin, and
spring are absent, otherwise the pistol functions fine. Holster is good with some
staining, mild age cracking on the straps, and overall solid construction.
Estimate: 1800 - 2500
LOT 390
U.S. Remington-UMC Model 1911 Semi-Automatic
Pistol - Serial no. 13686, 45 ACP cal., 5 inch round bbl.,
blue finish, hardwood grips. Manufactured in 1919, as
part of a limited serial number range assigned to Remington-UMC for late/post
WWI pistol production. Made using a different set of technical drawings than Colt
and Springfield, the Remington 1911 was purged from the inventory after the War to
ensure parts compatibility. Fixed sights, with the two-block, three-line patent and address markings
around the “REMINGTON/UMC” logo on the left side of the slide, “MODEL OF 1911/U.S. ARMY
CALIBER .45” on the right, and the “E.E.C.” and “Eagle Head/E28” proofs on the left side of the fame.
Fitted with an unmarked full blue barrel, two-toned pinned base magazine, checkered grips and a flat
top rear sight.
CONDITION: About good showing a mixed artificial brown and
gray patina overall, bright edge wear, scattered pitting, and mild
discoloration and handling marks overall. The grips are fair, with
dents and heavy wear. Mechanically fine.
Estimate: 2250 - 3500
LOT 391
World War I U.S. Colt Model 1911 Semi-
Automatic Pistol - Serial no. 165404, 45
ACP cal., 5 inch round bbl., blue finish,
walnut grips. Manufactured in 1917.
Standard markings including the “UNITED STATES PROPERTY” marking
on the frame. “GHS” (G. H. Stewart) inspection mark on the left side of
the frame. Fitted with a long smooth trigger, wide checkered hammer,
short grip safety, smooth mainspring housing with lanyard loop, and double
diamond checkered grips. Late production replacement magazine is included.
CONDITION: Very fine, showing 80% plus of the crisp original blue finish, showing the
start of a brown patina on the grip straps, minor handling evidence, and scattered areas
of pitting. The grips are also very
fine with replacement left bottom
screw, some dings and scratches,
and mostly sharp checkering.
Mechanically excellent.
Estimate: 2250 - 3500
LOT 392
World War II U.S. Remington-Rand Model
1911A1 Semi-Automatic Pistol with
Holster - Serial no. 2069325, 45 ACP cal.,
5 inch round bbl., parkerized finish, plastic
grips. Manufactured in 1944. Blade and flat
top notch sights, with the standard slide
markings, “FJA” inspected frame, stamped
trigger, thin checkered hammer, long grip
safety, checkered thumb safety, serrated slide
catch and arched mainspring housing, Keyes
Fiber grips, and a High Standard “HS” marked
barrel. Includes “1944” dated “US” embossed
Milwaukee Saddlery leather holster with leg
tie. Magazine absent.
CONDITION: Excellent with 97% plus original parkerized
finish, crisp markings, some light edge wear, and moderate
handling marks. Grips are also excellent with some small
dings on the otherwise crisp checkering. Mechanically
excellent. Holster is fine as redyed black with some verdigris
build up around the brass fittings, tight stitching, clear
markings, supple leather, and some scuffs and scratches.
Estimate: 1600 - 2250
LOT 393
World War II U.S. Ithaca Model 1911A1
Semi-Automatic Pistol with Holster
Rig - Serial no. 1267698, 45 ACP cal., 5
inch round bbl., parkerized finish, plastic grips.
Manufactured in 1943. Blade and flat top notch
sights, with the left side of the slide marked
“ITHACA GUN CO., INC./ITHACA, N.Y.”, and “P” on
top, Atwood inspected frame, checkered stamped
trigger and thin hammer, serrated safety, slide
catch and arched mainspring housing, Keyes
Fiber grips, “R” marked full blue magazine
and a High Standard barrel. Both the
slide and the frame are marked “M
1911 A1 U.S. ARMY” on the right side. A
modern brown cardboard box is included. Includes a
“US” embossed Enger-Kress black leather shoulder holster
rig and three extra magazines.
CONDITION: Excellent with 98% original parkerized finish
remaining, some light scattered edge wear, scattered
small surface scratches, and crisp proofs. The grips are also
excellent with mildly worn checkering and some small dings
on the bottom of the right panel. Mechanically excellent.
Estimate: 1600 - 2500

BOTH SIDES PICTURED
LOT 394
Desirable Early Production U.S. Navy Contract Colt Model 1911 Semi-
Automatic Pistol Serial Number 1752 - Serial no. 1752, 45 ACP cal., 5 inch round bbl., blue finish, walnut grips. Manufactured in 1912 as part
of the second 500-pistol block of 1911s produced for the United States Navy. Fitted with blade front and rounded notch rear sights, the two-line/
two-block address and patent marks are on the left side of the replacement slide with the circled Rampant Colt behind the serrations and “MODEL
OF 1911. U.S. NAVY” (with serifs) on the right side. The frame bears Walter G. Penfield’s “WGP” inspector
mark near the magazine catch, “UNITED STATES PROPERTY” on the front left, and “No.1752” on the reverse.
Fitted with a replacement wide checkered hammer, long smooth trigger, short grip safety, smooth lanyard base
mainspring housing and checkered grips with diamond patterns around the screws. The nitre blued slide stop is
the only remaining correct small part. Magazine is full blue and unmarked with a pinned lanyard base, and the
Later production replacement barrel is marked “COLT 45 AUTO/P” on the lower left side of the chamber.
CONDITION: Fine, with 40% of the original blue finish showing areas of gray and brown patina, bright edge wear
and scattered spotting and handling marks. A few heavier dents are present on the back right side of the slide. The
grips are fair with mild dings and a thick coat of applied varnish. Mechanically excellent.
Estimate: 4000 - 6000
BOTH SIDES PICTURED
AS PICTURED AND DESCRIBED
IN THE BOOK COLT .45 SERVICE
PISTOLS BY CLAWSON
LOT 395
U.S. Springfield Armory Model 1911 Semi-Automatic Pistol - Serial no. 118475,
45 ACP cal., 5 inch round bbl., blue finish, walnut grips. This Springfield Armory Model
1911 was manufactured in 1915. The pistol has the distinctive, dull blue, Springfield Armory finish with large diamond, checkered, walnut grips. The
‘two-tone’, lanyard loop, magazine has the distinctive Springfield Armory folded base. The right side of the slide is marked with the Spread Eagle/
Shield behind the ejection port and “MODEL OF 1911.U.S. ARMY.” ahead of it. The opposite side of the slide is marked with the 1897-1911 patent dates
over “COLT’S PT. F. A. MFG CO.” in a three-line block followed by: “SPRINGFIELD ARMORY/U.S.A.” in two lines. The Ordnance ‘Shell and Flame’ insignia is stamped behind the slide
serrations. The right side of the frame is stamped with the serial number, “No 118475” behind the slide stop pin hole. “UNITED STATES PROPERTY” is located on the left side of the
frame in front of the trigger guard and the Ordnance ‘Shell and Flame’ device is stamped above the magazine
release. The barrel is marked with a small “S” stamped on the right side of the barrel lug and “P” on the opposite
side. The Springfield “S” mark is visible on the safety lock, slide stop and firing pin stop. The hammer is the long
pattern with sharp rear edge.
CONDITION: Very fine. The pistol retains 85% of the original blue finish. There is light edge wear visible on the
slide and frame and the finish is thinning on the main spring housing and grip safety. The grips are in very good
condition with some moderate handling wear including pressure dings and handling marks. Markings are sharp.
Mechanically excellent. An exceptional example of a U.S. Springfield Armory Model 1911 semi-automatic pistol.
Estimate: 3500 - 5500
BOTH SIDES PICTURED
LOT 396
Documented British Royal Air Force Contract Colt Government Model
Semi-Automatic Pistol in .455 Auto, as Seen in Clawson’s “Colt .45 Service
Pistols” - Serial no. W107767, 455 Auto cal., 5 inch round bbl., blue finish, walnut
grips. Manufactured in 1918 on order for the British Government, this is a Colt Government Model semiautomatic
pistol outfitted with a .455 barrel and magazine, with a set of crossed pennant and broad arrow
military stamps, “crown/G2/A”, “crown/29/E” and “R.A.F.” markings on the left side of the frame, “CALIBRE 455” on
the right of the slide, along with the standard commercial markings. Fixed sights, with a long smooth trigger, wide checkered
hammer, short grip safety, checkered grips, a two-tone magazine with “CAL.455/ELEY” marked lanyard base, and the proper
“shelf” for the 455 case rim in the chamber hood. “K15” has been stamped on the top of the frame and the right side of the
barrel lug, with “15K” on the underside of the slide. With a modern plastic case. This particular pistol can be seen in a full page
spread (pg. 138) of Charles Clawson’s “Colt .45 Service
Pistols”, where it is noted as having received service at
Enfield Lock some time after initial acquisition.
CONDITION: Very fine, with 85% of the Enfield arsenal
refurbished blue finish, showing some edge wear,
scattered spotting and mild handling marks. The front
sight shows signs that it was lowered and then touched
up, with the top of the sight having a brown appearance.
The grips are also very fine, with some light dents
and scuffs, as well as some tool marks on the screws.
Mechanically excellent.
Estimate: 2750 - 4250
319

BOTH SIDES PICTURED
320
AS PICTURED AND DESCRIBED IN THE BOOK
SPRINGFIELD 1903 RIFLES BY BROPHY
LOT 397
Extremely Rare Documented Springfield
U.S.M.C. Model 1930 Single Shot International Match Bolt Action Rifle with Springfield Research
Letter - Serial no. 1341963, 30 06 cal., 30 inch bbl., blue finish, walnut stock. This U.S.M.C. Model
1930 Single Shot International Match (IM) Rifle was manufactured by Springfield Armory c. 1930.
It is identified by serial number and pictured and discussed on pages 116-118 of “The Springfield
1903 Rifles” by Brophy. Springfield Armory manufactured eleven special heavy barrel match rifles
for the Marine IM Rifle Team. These unique rifles outwardly resembled the Model 1924 IM rifles.
However, the Marine rifles had a special solid base receiver and international match style stock
with no magazine well. In addition, these rifles featured a Garand high speed firing mechanism,
Woody double-set trigger, adjustable cork palm rest and adjustable aluminum hooked buttplate.
The rifles had a 30-inch heavy barrel with Winchester globe front sight on a modified Browning
Automatic rifle mount and is secured by a modified Model 1917 Enfield barrel band. The rifle has a
Lyman 48 receiver sight and telescopic sight blocks mounted on the barrel and receiver. The rifles
had the low-luster blue finish used on Springfield Armory NRA Sporter and heavy barrel target rifles.
The bolts were armory polished. This rifle is identified as one of the eleven U.S.M.C Single Shot IM
rifles in Springfield Army documents that accompany the rifle. In addition, the rifle is complete with a
Springfield Research Service letter that indicates it was sold to Marine Lieutenant W.R. Walsh in 1936
(Walsh was one of the officers responsible for development of the U.S.M.C. Scout-Sniper program during
WWII). The receiver is marked with the serial number along with the usual Springfield Armory markings. The
bolt is not serial numbered, but the bottom of the handle is numbered “6”. The bottom of the receiver is stamped with a steel lot code “NS/J100”. The die mark “NS-42” is stamped in the floor-plate recess (as shown on page 117
of “The Springfield 1903 Rifles”). The Woody trigger guard and sear are numbered “1244367”. The underside of the barrel is stamped with the star-gauge number “61”. The rifle is fitted with telescopic sight block and a Lyman 10X
“Targetspot” telescopic sight with target mounts and a fine wire and dot cross-hair. The top of the bolt handle has been crudely milled to clear the telescopic sight. The stock has been shortened 1-inch and has been restored to the
original length using what appears to be the original wood. The rifle is accompanied by several copies of Springfield Armory documents that discuss the U.S.M.C. IM rifles and identify the rifles by serial number.
CONDITION: Very fine. The barrel, receiver and trigger retain 85% plus of the original blue finish. The sides of the barrel along the top of the stock have a number of small patches of scattered light pitting and age discoloration.
The front sight base and barrel band show moderate finish loss. The Lyman 48 rear sight components do not match, and the sight retains 80% of the blue finish. The Lyman Targetspot telescopic sight has 90% of the blue finish
with clear optics. The scope body has scattered spots of surface discoloration. The Woody trigger and cork palm rest are in excellent condition. Except the period replaced section (can be seen in the book noted above), the stock
remains in very fine condition with a few scattered handling marks. The Springfield Armory M1903 heavy barrel target rifles were made in extremely limited numbers and are all considered rare and very desirable. The eleven solid
base receiver match rifles made by Springfield Armory specifically for the Marine IM Rifle Team are probably the rarest of these rifles. This is a very fine and fully documented example of one of these extremely rare U.S.M.C. singleshot
International Match rifles.
Estimate: 10000 - 20000
LOT 398
U.S. M1903A1 Springfield Bolt Action Rifle with Unertl “USMC-SNIPER”
Telescopic Sight and Micarta Can - Serial no. 1530555, 30-06 cal., 24 inch
round bbl., parkerized finish, walnut stock. This Springfield Model 1903A1 rifle was
manufactured in 1939 and subsequently non-military fitted with a USMC 8 power Unertl sniper scope serial number 1406. The
rifle barrel is marked SA/8-38”. The rifle has the post World War I Marine front sight blade, front sight cover and rear sight aperture.
The rifle is in service configuration with parkerized “NS” bolt and parkerized receiver. The barrel lacks National Match star
gauge mark on the muzzle. The bolt is not serial numbered. The “Style C” pistol grip stock has no proof or inspection
marks and is fitted with a blued, fine checkered buttplate. The rear reinforcing bolt is a slotted replacement. The barrel
and receiver are drilled and tapped and fitted with Unertl scope blocks. The rear block is located approximately 1/4-
inch behind the rear sight base. The WWII handguard has been sanded to accept Unertl target mounts. The handguard
modifications and scope block locations do not conform to the pattern found on genuine U.S.M.C. M1903A1 sniper rifles.
The U.S.M.C. Unertl telescopic sight has the standard commercial blue finish and is roll stamped: “J. UNERTL/USMC-
SNIPER/1406”. The scope has fine wire cross-hairs, screw-on steel lens caps and civilian style recoil spring. The scope has
black anodized Unertl target mounts of the same pattern furnished with U.S.M.C. sniper scopes. The rifle is complete with
the scarce Micarta scope can issued with Unertl sniper scopes and russet leather M1907 sling.
CONDITION: Fine. The rifle has been assembled to USMC configuration. The USMC Unertl telescopic sight and target mounts are in very fine condition and retain 90% plus of the blue and anodized black finish. The scope optics are
very good. The scarce Micarta scope can is in very fine condition and retains 85% plus of the original green painted finish. The rifle has 80% of the arsenal parkerized finish with sharp markings. The sanded stock has been refinished,
and has no visible markings and remains in very good overall condition. This is a good looking assembled example of a nearly impossible to obtain U.S.M.C. M1903A1 sniper rifle with very desirable U.S.M.C. Unertl
sniper scope and Micarta can.
Estimate: 4000 - 7000

LOT 399
World War II U.S. Inland M1A1 Semi-Automatic Paratrooper
Carbine - Serial no. 6648334, 30 Carbine cal., 18 inch round bbl.,
parkerized finish, walnut/steel stock. Inland barrel dated “11-44” with standard fixed blade
front and stamped adjustable rear peep sights, “KI” marked type 3 barrel band with bayonet lug, standard
markings on the receiver ring, blue round top bolt, milled trigger guard, smooth push button safety, unmarked
magazine catch, and standard marking on the receiver heel. Fitted with a four rivet handguard, low wood stock with pistol
grip marked “RI/3” on the end, absent ordnance cartouche, and folding steel buttstock with correct riveted cheekpiece, and cast metal
buttplate with the correct casting marks on the inside surface. Includes green canvas web sling.
CONDITION: Excellent with 90% original parkerized finish, some scattered edge wear, surface scratches, and handling marks overall. The wood is very fine with
some small scattered dings. Mechanically excellent.
Estimate: 3750 - 5500
LOT 400
Scarce U.S. Contract Stevens Model 77E Slide Action Riot
Shotgun - Serial no. 25442, 12 gauge, 20 inch round bbl., parkerized finish,
hardwood stock. Originally developed with an eye for arming the people of
Southeast Asia against the communists,
the United States Army and Marine Corps
both took an interest in the 77E as a replacement for
their aging stocks of WWI and WWII vintage trench and riot guns. The 77E became very popular
as an “anti-ambush” gun in the jungles, as it was capable of delivering immediate and vicious fire
at close ranges. While one of the signature weapons of the Vietnam War, relatively few can be found
on the American market today in any condition. Single nickel bead sight, full choke, and 2 3/4 inch chamber. The frame is marked “US”
on the right side, with “P” on the upper right side and on the breech of the barrel. Fitted with a ribbed forearm and a smooth pistol grip
stock with a green nylon sling, vented rubber recoil pad and a 12 7/8 inch length of pull.
CONDITION: Very fine with 85% original green parkerized finish areas of edge wear, scratches throughout, cycling marks, light spotting, and chipping
of the black finish on the trigger guard. The wood is fine with small dings and scratches overall, and half original black stained finish. Mechanically excellent.
Estimate: 3500 - 5500
LOT 401
Extremely Scarce U.S.A.F. Property Marked Ithaca Model M6
Survival Gun - Serial no. 137372, 22 Hornet 410 cal., 18 1/4 inch
round bbl., parkerized finish, metal stock. This extremely scarce example of the M6 Survival gun was manufactured by Ithaca for the United States Air Force.
Legal length 18-1/4 inch barrels are on this specific example. Chambered for the .22 Hornet cartridge and the .410 shotgun shell. Marked on the left side of the
receiver “U.S.A.F. PROPERTY/137372/RIFLE-SHOTGUN. SURVIVAL./CAL. .22/410, M6”. The right side is marked “ITHACA GUN CO., INC. ITHACA N.Y.”, with the crossed
cannon ordnance mark beneath.
CONDITION: Very fine, 98% original finish on breechblock and stock remaining, showing only a few light nicks and faint scuffs. A unique find in any condition
and this one is not to be mistaken with the commercially sold newly manufactured examples. Mechanically excellent. This is U.S.A.F. issue with legal length
barrels installed.
Estimate: 2500 - 3750
LOT 402
Exceptional Late World War II U.S. Springfield Armory
M1 Garand Semi-Automatic Rifle with Bayonet - Serial no. 3386890, 30-06 Springfield cal.,
24 inch round bbl., parkerized finish, walnut
stock. Manufactured in 1944. Blade front
and adjustable peep rear sights, Springfield
barrel dated “1 45”, standard markings
on the receiver heel, uncut operating rod, and “SA” marked bolt carrier, trigger
group, hammer, and safety. Pistol grip stock with boxed “S.A./G.A.W.” inspection
mark, “crossed cannons” ordnance stamp, circled “P” proof on underside of wrist, and
stamped checkered trapdoor buttplate. With canvas web sling, PAL bayonet dated “1942”, and composite sheath.
CONDITION: Excellent with 95% original parkerized finish, some traces of faint edge wear, small surface scratches, and handling marks. The stock is also excellent with crisp markings, and some small dings. Mechanically excellent.
Bayonet is good with dark patina on the fittings, clear markings, and dings on the grip scales.
Estimate: 2250 - 3500
321

322
LOT 403
Scarce Maguire Industries Inc./Auto-Ordnance Model 1928AC Fully Automatic
Registered Class III/NFA C&R Submachine Gun - Serial no. A.O.134533, 45 ACP cal., 10
1/2 inch round bbl., blue finish, walnut stock, walnut grips. This is a very fine example of a
Model 1928A1 Thompson Submachine gun originally manufactured by the Auto-Ordnance
Division of Maguire Industries Inc. in Bridgeport Conn. This example was probably originally
produced under a U.S. Government contract. The U.S. military Thompson SMGs were
originally produced during WWII circa 1941-43, with the last Auto-Ordnance production
contract ending in Feb 1944. The legacy of how the Thompson was originally developed,
produced and later resold is somewhat tumultuous; however, in March of 1944, the original
Auto-Ordnance Corporation previously acquired by Maguire Industries Inc. was renamed
the Auto-Ordnance Division of Maguire Industries Inc. Per the paperwork this example
was acquired and sold by the Auto-Ordnance Division of Maguire Industries Inc. The
original “US” and “A1” markings (in 1928A1) were removed in this case so it could be sold
as a commercial/law enforcement SMG. Prior to being sold a letter “C” was added to the
nomenclature block, so that it now reads “MODEL 1928 AC” indicating it was released for
commercial sales. These A.O. Thompson SMGs had a mix of features, like this one that has
the smooth all blued barrel, “L” type fixed wartime rear sight, a second model compensator
that is marked with the Auto-Ordnance/CUTTS/Thompson markings, a vertical forend,
and dipped, matte blued finish on the receiver and lower trigger housing. It still retains
the detachable walnut buttstock and walnut pistol grip. The left side of the receiver is
marked “MODEL 1928 AC/No. A.O. 134533” followed by “THOMPSON SUBMACHINE GUN/
CALIBER .45 AUTOMATIC CARTRIDGE.”. The right side is marked with “AUTO-ORDNANCE
CORPORATION/BRIDGEPORT CONNECTICUT U.S.A.”, followed by six lines of patent numbers
and dates towards the rear of the receiver. At one time it was deactivated as there is a small
tack-welded area on the left side of the trigger housing next to the selector switch, that was
partially removed to make it fully automatic again. This desirable weapon has the correct oil
finished all walnut buttstock, horizontal foregrip and pistol grip and is complete with two
stick magazines, one 20 round and one 30 round stick magazine.
CONDITION: Very fine with 90% plus of a partially refurbished blue finish on the receiver
and trigger housing with the original blue finish on the barrel and compensator. The bolt
body is also blued with the round front polished in the white. The wood components
are all in very good condition overall with a nice matching dark color overall, showing
light handling marks and scratches on the sides of the buttstock and rear pistol grip. An
interesting WWII vintage Auto-Ordnance Thompson SMG. NOTE: This weapon is a National
Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol,
Tobacco, Firearms and Explosives, (BATFE) that is classified as a “Curios or Relic” as defined in
27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and
27 CFR part 478.
Estimate: 20000 - 30000

BOTH SIDES PICTURED
LOT 404
World War II G.I. Bring Back U.S.
Inland M1 Semi-Automatic Carbine with
Shipping Crate - Serial no. 767275, 30 Carbine cal.,
18 inch round bbl., parkerized/blue finish, walnut
stock. Totally original World War II Inland contract M1
Carbine with an Inland barrel dated “7-43” standard
blade front and Type-L two leaf rear peep sights,
“U” marked Type I narrow barrel band, standard
markings on the receiver ring, flat top blued bolt, milled trigger group with unmarked smooth push button safety, unmarked smooth magazine catch, and standard markings on the receiver heel. Early pattern high wood stock
and two rivet handguard with shallow/narrow sighting channel, large “crossed cannons” stamp on right side of buttstock, circled “P” on the grip end, “IO” stamped sling cutout, and stamped checkered buttplate. Includes hardwood
shipping crate with “U.S. NAVY” marked postage type stamps. Magazine absent.
CONDITION: Excellent with 95% original parkerized finish, scattered small scratches and nicks, some light cycling wear on the receiver rails, and 90% of the original blue finish on the bolt body. The stock is very fine with scattered
dings and bruises, and mostly dark patina on the buttplate. Mechanically excellent. Crate is good with broken hinges, dings and chips throughout, and discoloration.
Estimate: 4500 - 7000
BOTH SIDES PICTURED
LOT 405
Scarce U.S. Contract
Stevens Model 77E Slide Action Riot Shotgun - Serial no.
36476, 12 gauge, 20 inch round bbl., parkerized finish, hardwood stock. Originally
developed with an eye for arming the people of Southeast Asia against the Communists, the United
States Army and Marine Corps both took an interest in the 77E as a replacement for their aging stocks of WWI
and WWII vintage trench and riot guns. The 77E became very popular as an “anti-ambush” gun in the jungles, as it was capable of
delivering immediate and vicious fire at close ranges. While one of the signature weapons of the Vietnam War, relatively few can be found on
the American market today in any condition. Single nickel bead sight, an improved modified choke and a 2 3/4 inch chamber. The frame is marked “US” on the right side, with “P” on the
upper right side and on the breech of the barrel and “SCHD” added to the right side of the frame at the stock junction. Fitted with a ribbed forearm and a smooth pistol grip stock with a green
nylon sling, vented rubber recoil pad and a 12 7/8 inch length of pull.
CONDITION: Very fine with 85% original green parkerized finish, numerous small surface scratches, handling marks overall, and some light spotting and edge wear. The wood is very good with
most of the original black stained finish absent the buttstock, small dings throughout, and slightly undersized pad. Mechanically excellent.
Estimate: 3000 - 4500
BOTH SIDES PICTURED
LOT 406
World War II Model 1941 Johnson Semi-Automatic Rifle - Serial no. 8984, 30-06 Springfield cal., 22 inch round bbl.,
parkerized finish, walnut stock. The receiver is marked “CAL. 30-’06 SEMI-AUTO./JOHNSON AUTOMATICS/MODEL OF 1941/
MADE IN PROVIDENCE, R.I., U.S.A.” over serial number “8984”. The five-line patent markings are stamped between the factory legend
and the rear sight. There is a small inverted triangle stamped on the right rear of the receiver that is marked inside with “CRANSTON/ARMS/CO.” The rifle
has the distinctive 22 inch barrel with the face of the barrel collar stamped “.30 06/41”. The receiver has a perforated barrel shroud and a tangent style rear sight graduated
in meters. The bright polished bolt is numbered “A0677”. It is fitted with the standard ten-round rotary magazine. The two-piece walnut stock is oil finished and has a checkered steel buttplate. In August 1940, the
Netherlands Purchasing Commission ordered 10,200 Johnson Automatic rifles for colonial troops in the Dutch East Indies. Before they could be delivered, the Japanese captured the Dutch colonies preventing their delivery.
The U.S. Marine Corps tested and obtained a limited number of the Dutch contract Model 1941 rifles as a war expedient rifle supply until they could receive the new M1 Garand rifles. Includes canvas web sling.
CONDITION: Fine with 70% of the thin arsenal refurbished parkerized finish remaining, some areas of edge wear, light spotting, handling marks overall, and light markings. The sanded, re-oiled wood is also fine with some
visible filler plugs, and small scattered dings. Mechanically excellent.
Estimate: 2750 - 4250
323

BOTH SIDES PICTURED
AS PICTURED AND DESCRIBED
IN THE BOOK THE SPRINGFIELD
1903 RIFLE BY BROPHY
LOT 407
Desirable Documented Springfield Armory
Model 1903 Heavy Barrel International Match Bolt
Action Rifle with Rare Schuetzen Stock - Serial no. 1285607,
30 06 cal., 28 inch bbl., blue finish, walnut stock. This Model 1903
Style B International Match rifle was manufactured by Springfield
Armory c. 1928 and fitted with a schuetzen style cheek-piece.
This rifle is illustrated and briefly described on page 138 of
“The Springfield 1903 Rifles” by LTC. William S. Brophy. Brophy
states that this rifle is: “One of three known unusual Springfield
Armory heavy barrel style “B” international-type rifles. All rifles are
identical in all respects, even to not having front sights. It is very
possible that these rifles were assembled for use in long range
competitions such as the Wimbledon Cup and Herrick Trophy
matches in which telescopic sights were allowed.” The rifle has
a standard Model 1903 receiver with armory polished bolt with
headless cocking piece and reversed safety. The bolt is not serial
numbered and has a “J5” steel lot code on the bottom of the safety lug. The receiver is fitted with a Lyman 48
micrometer sight. The rifle has a standard trigger. The 28-inch heavy barrel is 1.2-inch in diameter at the breech
and 1.0-inch in diameter at the muzzle. The barrel is secured by the same modified Model 1917 rifle special barrel
band utilized on the Springfield Style T heavy barrel rifles. The barrel has no provision for a front sight.
Unertl telescopic sight bases are mounted on the barrel and receiver. The rifle is fitted by a non-period Unertl 15X
target scope with fine wire cross-hair and aluminum target mounts. The rifle has a 1924 International Free Rifle
style stock with adjustable Swiss buttplate that has been modified by removing the upper half of the butt and
cheek-piece and replacing it with a schuetzen style cheek-piece. The modification is precisely done and clearly
Springfield Armory work. The stock is stamped with an encircled, block “P” proofmark on the face of the pistol
grip. The receiver has the standard Springfield Armory markings which are partially covered by the rear sight
base. The markings on the safety and magazine cut-off have the correct block letters. The underside of the barrel
is stamped “SA/512” opposite the front sight base. There are no other markings on the barrel. The barrel, barrel
band, receiver, trigger guard, floor plate and bolt sleeve have the same blue finish found on M1903 Sporters
manufactured for commercial sale. The bolt and extractor are polished and the bolt has the distinctive armory
polishing marks on either side of the safety lug. The safety lever has the late casehardened finish. The stock is oil
finished black walnut. All of the heavy barreled target rifles manufactured by Springfield Armory are rare. This
rifle is quite possibly the rarest of all the Springfield heavy barrel match rifles.
CONDITION: Excellent. The rifle retains 95% plus of the original blue finish. There is some slight wear on the edges
of the muzzle and on the sides of the barrel. The blue on the trigger guard and buttplate is thin. The Lyman 48
sight shows significantly more wear than the other components and has 70% of the blue finish. The stock is very
good overall and shows only light to moderate handling wear with the exception of the right side of the butt
which apparently has been glued and roughly varnished to reinforce the schuetzen cheek-piece joint. The blue
finish on the Swiss buttplate and hardware has aged to an even blue-brown patina. The Unertl target scope and
mounts are in excellent condition with clear optics. This is an excellent example of a Springfield Armory Model
1903 Style B International Match Rifle that is illustrated and described in “The Springfield 1903 Rifles”.
Estimate: 7500 - 12000
BOTH SIDES PICTURED
324
LOT 408
Excellent and Very Scarce Documented U.S. Springfield Armory Model 1903 Special
Target Bolt Action Rifle with Star Gauged Barrel and Springfield Research Letter - Serial no. 1266635, 30-06
Springfield cal., 24 inch round bbl., parkerized finish, walnut stock. The included Springfield Research Service letter confirms
the model and serial number and states that the rifle was as a “Special Target” model to the Dickinson County Rifle Club of Abilene,
Kansas on May 19, 1927. Fitted with a National Match spec “star gauge” marked barrel dated 4-25” with blade front and adjustable
ladder rear sights (without volley notch) with polished face, standard markings on the receiver ring, parkerized bolt, and standard
smooth trigger. Straight grip stock with grasping grooves, dual reinforcing bolts, circled “P” on the underside of the wrist, boxed “D.A.L.”
inspection cartouche on the left side, and coarse checkered steel, trapdoor buttplate with oiler in the trap.
CONDITION: Excellent with 90% plus original parkerized finish remaining overall, some scattered light edge wear, and surface nicks,
visible cycling wear on the bolt body and extractor, and light edge wear on the buttplate. The stock is also excellent with very sharp markings, some small scattered dings, and some
small chips at the toe. Mechanically excellent.
Estimate: 3500 - 5500

BOTH SIDES
PICTURED
LOT 409
Post-World War II Auto-Ordnance Thompson
M1A1 Submachine Gun, Class III/NFA Fully
Transferrable Machine Gun, with Soft Case -
Serial no. M250A, 45 ACP cal., 10 1/2 inch round
bbl., parkerized finish, walnut stock. Originally
developed in the 1940s (with this example
produced in the 1960s/1970s), the M1A1 was the
war expedient version of the famous Thompson
SMG. Stripping away most of the cosmetic
and mechanical bells
and whistles, the M1A1
still retained the distinct
profile and “heavy metal”
construction of the famous
Thompson, and held a
reputation for ruggedness
and reliability. While in
theory rendered obsolete
by the M3 “Grease Gun”, the
M1A1s in American inventory
are known to have been in
service as late as the Vietnam
War. Fixed blade front and
peep rear sights, with an unribbed barrel, straight handguard, and the Thompson/Auto-Ordnance marked receiver fitted
with a side-cocking, simplified bolt. The trigger group is numbered “512464” on the underside, with “FIRE”/”SAFE” and
“FULL/AUTO”/”SINGLE” control levers and a fixed buttstock with a trapdoor buttplate. Included with the item is a green
canvas soft case, numbered “8300-442650” on the back.
CONDITION: Excellent, with 98% of the parkerized finish, with a small amount of covered pitting present on the trigger
housing and some small parts. The rear sight is a bit loose. The wood is in very good condition, with some light dents and
scratches. The case shows some wear and staining, and appears to be missing a shoulder strap. Mechanically excellent.
NOTE: This weapon is a National Firearms Act (NFA), Class 3, which is registered with the Bureau of Alcohol, Tobacco,
Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Estimate: 14000 - 22500
LOT 410
Large Grouping of Thompson Submachine Gun Stick Magazines and One Type C Drum Magazine - Grouping
includes: 33 thirty round stick magazines with markings for the following manufacturers: Sparks-Withington, Crosby
Company, and Seymour Products; two twenty round magazines, one Auto Ordnance, one Worcester Pressed Steel; and
one late 20th century production Auto Ordnance Type C 100 round drum magazine. Also included is a DVD entitled
“Technical Manual & Armorer’s Course: Thompson Submachine Guns”
CONDITION: Stick magazines are very fine overall with several showing areas of oxidation, edge wear, scratches and
handling marks. A few have been reblued over visible pitting. The Drum magazine is excellent with some scratches, light
edge wear, and light visible oxidation.
Estimate: 950 - 1600
325

The Next Two Rifles are Consecutively Serial Numbered
LOT 411
U.S. Springfield M1 Garand Type II National
Match Semi-Automatic Rifle with CMP Letter -
Serial no. 6099793, 30-06 Springfield cal., 24 inch round bbl.,
parkerized finish, walnut stock. The included CMP letter identifies the rifle by serial number as a National
Match rifle shipped from the Raritan Arsenal. With a Springfield barrel dated “8 56” with correct “P”, “T”, “M”, and “eagle” stamps on the
chamber, unmarked blade front and peep rear sight with “HRA” marked windage drum, “NM” marked staff, “595” marked rear aperture hood, “NM star”
marking on left side of barrel, “NM” marked relief cut operating rod, standard markings on the receiver heel, and “SA” marked trigger group, hammer, and
safety. Smooth, unbedded pistol grip stock with DoD “eagle” stamp on left side, circled “P” on the inside of the wrist, and stamped checkered trapdoor buttplate. This National
Match rifle is consecutively numbered to the National Match rifle following this lot.
CONDITION: Excellent with 95% original dark parkerized finish remaining, some small scratches, and minor handling marks. The stock is also excellent with some small scattered
dings, and mostly gray patina on the buttplate. Mechanically excellent.
Estimate: 2750 - 4250
LOT 412
U.S. Springfield M1 Garand Type II
National Match Semi-Automatic Rifle
with CMP Certificate - Serial no. 6099794, 30-06 Springfield cal., 24 inch round bbl., parkerized
finish, walnut stock. The included CMP certificate of authenticity identifies the rifle by serial number as a National Match. With a
Springfield barrel dated “8 56” with correct “T”, and “P” markings on the chamber, barrel marked “NM star” on the left side near the muzzle,
“NM” marked relief cut operating rod, “NM/062” marked front sight base, “NM/2A” marked rear sight base and staff, hooded aperture, “NM”
marked windage drum, and standard markings on the receiver heel. Springfield trigger group, safety, hammer, and bolt carrier. Smooth pistol grip stock with light
glass bedding, circled “P” proof on the inside of the wrist, DoD “eagle cartouche on left side, “5/0” stamped at the heel, and stamped checkered buttplate with trapdoor. This
National Match rifle is consecutively serial numbered to the preceding lot.
CONDITION: Fine with 85% plus original parkerized finish remaining, slightly light heel markings, areas of light edge wear, scattered surface scratches, and minor cycling marks. The stock is also very good with faint cartouche,
small dings throughout, 3 inch scratch at top of comb, and mixed gray patina and scratches on the buttplate. Mechanically excellent.
Estimate: 2000 - 3000
LOT 413
Exceptional Documented U.S. Springfield Armory Model 1903
NRA Sporter Bolt Action Rifle with Springfield Research Letter
- Serial no. 1407160, 30-06 Springfield cal., 24 inch round bbl., blue finish, walnut stock. The included
Springfield Research Service letter confirms the serial number and type as “Rifle, U.S. Cal. .30, M1903, Sporting, NRA Type”. It also confirms that
is was sold by the Springfield Armory on February 14, 1933. Standard blade front sight with hood on the star gauged National Match spec barrel marked
“SA/flaming bomb/6-32” and no provision for a rear sight on the barrel. Standard receiver ring markings, un-numbered, polished in-the-white, “NS” marked, nickel
steel bolt, polished follower ridge, and receiver mounted Lyman adjustable rear peep sight. Correct sporting style smooth walnut stock with dual reinforcing bolts,
sling swivels, single circled “P” proof on the underside of the wrist, and correct cupped and checkered blue steel buttplate. Also included is a copy of the original sales
record and leather sling. Only about 7,000 NRA/DCM sporting rifles were manufactured between 1923 and 1933.
CONDITION: Excellent 95% original blue finish remains with some light edge wear, traces of scattered spotting, and some small scattered surface scratches. The stock is very fine with some
dings and scratches, added rubbed oil finish on the otherwise excellent stock,, and mottled brown/blue patina on the buttplate. Mechanically excellent.
Estimate: 2500 - 3750
LOT 414
U.S. Springfield Armory M1D Semi-Automatic Sniper Rifle with Scope and CMP
Certificate - Serial no. 3607086, 30-06 Springfield cal., 24 inch round bbl., parkerized finish, walnut
stock. Manufactured in 1945 and subsequently armory refurbished and upgraded to M1D specifications with the addition of a “6 52”
dated Springfield M1D barrel with integral scope block. Blade front and adjustable rear peep sights, unnumbered scope base with Weaver
M84 telescopic sight, relief cut operating rod, “SA” marked trigger group, bolt carrier,and hammer, and standard markings on the receiver heel. Standard
pistol grip stock with circled “P” proof on inside of wrist, “X16” on grip end, attached (not screwed) leather cheekpiece marked “MRT/11-62”, and stamped checkered trapdoor
buttplate. With canvas web sling. Includes both the CMP bill of sale and certificate of authenticity, identifying the rifle as a “Service Grade” M1D Garand.
CONDITION: Very fine as arsenal refurbished and upgraded to M1D configuration with 95% dark post-war parkerized finish some traces of light edge wear, scattered small scratches, and some light
pitting on the gas tube. The wood is good with scattered small dings and bruises throughout and edge wear on the buttplate. The scope is excellent with some light patina and clear optics.
Estimate: 2250 - 3250
326
LOT 415
U.S. Inland M1A1 Semi-Automatic Paratrooper Carbine with Canvas Jump Sleeve -
Serial no. 5047728, 30 Carbine cal., 18 inch round bbl., parkerized finish, walnut/steel stock.
Inland barrel dated “2-44”, standard blade front and adjustable peep rear sights, type 3 barrel
band with bayonet lug, standard markings on the receiver ring and heel, toggle safety, “M”
marked magazine catch, milled trigger group, M1A1 configuration with folding wire stock, replacement earlier production 2
rivet handguard, “RA-P” arsenal inspection mark on right side above the grip, riveted leather cheekpiece, spring loaded cast buttplate
with correct numbers on the rear face, canvas web sling, and canvas jump case.
CONDITION: Very fine with 95% dark arsenal refurbished parkerized finish remaining, some traces of brown spotting, handling marks, and small cycling marks on the bolt body.
The stock is also very fine with small dings scattered on the wood, visible inspection and acceptance marks, and some small scuffs on the leather.
Estimate: 2250 - 3500

LOT 416
Exceptional Early Production U.S. Rock Island Arsenal
Model 1903 Bolt Action Rifle - Serial no. 128345, 30-06 cal., 24
inch round bbl., blue finish, walnut stock. Manufactured late in 1907 with the barrel marked “R.I.A./4-09”, hooded blade front
and adjustable ladder rear sights with top volley notch, standard receiver markings, and “61” on the underside of the rear bolt lug. Smooth
straight grip stock with grasping grooves, a boxed script “C.N./1909” cartouche, a circled script “P” proof on the bottom of the wrist and a smooth steel
trapdoor buttplate.
CONDITION: Exceptionally fine, with 85% of the original blue and casehardened finish, showing areas of brown patina, mild wear and handling marks. The stock is very fine, with some visible chipping
around the front of the trigger guard, mild scattered dings and scratches. Mechanically excellent.
Estimate: 2750 - 4250
LOT 417
U.S. World War II Springfield Armory M1 Garand Semi-
Automatic Rifle - Serial no. 558863, 30-06 cal., 24 inch round bbl., parkerized finish, walnut
stock. This is an excellent example of a U.S. World War II issue M1 Garand rifle. The receiver was
manufactured in April of 1942 and the barrel is stamped “S-A-5-42”. The bolt is a later production “D78287-12SA”
marked piece. Has the standard sights with a correct cap over the front sight screw, a bar lock windage drum and a “BATTLE RANGE”
marked elevation drum. Mounted on a smooth walnut pistol grip stock with a boxed “S.A./GHS” cartouche, a crossed cannon ordnance cartouche
and a circled “P” proof. Includes a 1918 dated leather sling.
CONDITION: Very fine with 95% plus of the original green parkerized finish remaining. There is some high edge wear and some scattered minor scratches. The wood is fine with scattered dings, scratches and a
3 inch tight hairline crack in the forearm. The cartouches are lightly visible. Mechanically excellent.
Estimate: 2250 - 3750
LOT 418
World War II U.S. Inland M1A1 Semi-Automatic Paratrooper Carbine - Serial no. 6234158, 30 Carbine cal.,
18 inch round bbl., parkerized/blue finish, walnut/steel stock. Inland barrel dated “11-44” with standard fixed
blade front and stamped adjustable rear peep sights, “SI” marked type 3 barrel band with bayonet lug, standard
markings on the receiver ring, blue round top bolt, milled trigger guard, smooth push button safety, “M” marked
magazine catch, and standard marking on the receiver heel. Fitted with a four rivet handguard, low wood stock
with pistol grip marked “IO” on the end, Ordnance “crossed cannons” cartouches on the right side and end of the
grip, and folding steel buttstock with replacement riveted cheekpiece, and cast metal buttplate with the correct casting marks on the inside surface. There are no “P” proofs visible.
Includes green canvas web sling, canvas double magazine pouch, second smaller pouch, and canvas muzzle cover.
CONDITION: Very fine. The carbine retains 95% arsenal refurbished parkerized finish with crisp markings and a few small scattered surface scratches. The revarnished wood is fine with a few dents and
bruises, scattered small dings, and visible handling marks overall. Mechanically excellent.
Estimate: 2500 - 3750
LOT 419
Exceptional U.S. Harrington & Richardson M1 Garand Semi-Automatic Rifle - Serial no.
5621859, 30-06 Springfield cal., 24 inch round bbl., parkerized finish, walnut stock. Manufactured in 1955. Blade front and adjustable peep
rear sights, “4 55” dated HRA barrel, relief cut operating rod, “HRA” marked trigger group, hammer, and safety, and standard markings on the receiver heel. Pistol grip stock
with DoD “eagle” cartouche on left side, circled “P” on the wrist, and stamped checkered trapdoor buttplate. Includes foil lined storage bag.
CONDITION: Excellent with 98% plus original parkerized finish, some light edge wear, handling marks, and some scattered surface scratches. The stock is very fine with scattered small dings, and dark
patina on the buttplate. Mechanically excellent.
Estimate: 1800 - 2750
LOT 420
Early World War II Production U.S. Winchester M1 Semi-
Automatic Carbine - Serial no. 1023621, 30 Carbine cal., 18 inch
round bbl., parkerized/blue finish, walnut stock. Correct undated “W”
marked, Winchester proofed barrel, blade front and two-leaf flip up
rear peep sights, narrow type 1 barrel band, blue finish flat-top bolt,
milled trigger group with correct early checkered push button safety and serrated magazine catch, and standard markings on the receiver heel. Correct high wood
stock, two rivet handguard, “crossed cannons” Ordnance mark and “W.R.A/G.H.D.” inspection marks on right side of buttstock, “I” cut oiler slot, stamped checkered buttplate, and canvas web sling with oiler.
Includes canvas double magazine pouch with extra magazines, smaller pouch, and canvas muzzle cover with modern oil bottle.
CONDITION: Very fine as professionally restored with 95% of the parkerized finish remaining, some light cycling marks visible on the bolt body, and well defined markings. The stock is also very fine with crisp markings, some
chipping at the nose and around the oiler slot, and hairline crack behind the recoil shield. Mechanically excellent.
Estimate: 1800 - 2500
LOT 421
Documented U.S. Springfield Armory Model 1922 MI/II Bolt Action Rifle with Springfield Research
Letter - Serial no. 20498B, 22 LR cal., 24 1/2 inch round bbl., blue finish, walnut stock. The included Springfield Research Service letter confirms
the model, serial number and October 16, 1936 date of sale to Everett J. Tracy of Pomeroy, Ohio. Fitted with a Lyman No. 17A globe front sight on the barrel marked “SA/flaming bomb/12-
31” with standard markings on the receiver ring, hand stamped additional “I” and “B” in the model and serial number markings, matching numbered polished nickel steel bolt with “M2”
marking on the handle, adjustable Lyman rear peep sight on the bridge, and serrated trigger. The barrel and receiver ring are fitted with scope bases. Correct sporter type pistol grip stock with a
single barrel band, sling swivels, and cupped, checkered steel buttplate. Includes Lyman No. 17A sight box with original front sight blade and seven extra globe inserts.
CONDITION: Excellent as arsenal upgraded to MII speciificaton with 98% bright original blue finish remaining, traces of light muzzle and edge wear, and some mild cycling marks visible on the
bolt body. The stock is also excellent with a few small scattered dings, and mild patina on the buttplate. Mechanically excellent.
Estimate: 1300 - 1900
327

NOTICE THE ENGRAVED “X” OVER
THE USMC, USED ON THE VERY FEW
DECOMMISSIONED PISTOLS OFFERED
FOR COMMERCIAL RESALE
Collector’s Fact
On July 20, 2012, The Colt Rail Gun
was chosen by the USMC as their
close quarter battle pistol.
LOT 422
Documented U.S.
Colt Marine Corps M45A1 Close Quarters
Battle Semi-Automatic Pistol “Genuine
Operator Issue” with Box and Certificate of
Authenticity - Serial no. 05923EGA, 45 ACP cal.,
5 inch round bbl., desert tan finish, G10 grips. According to the
included letter this pistol was one of the original run of Colt “Rail
Gun” Government Model pistols produced to United States Marine
Corps specifications as the M45A1 Close Quarters Battle Pistol.
Intended as a replacement for the Corps’ aging stock of 1911/1911A1
pistols, the M45A1 was destined expressly for units like Force Recon, Marine
Special Operations Command (home of the Marine Raiders), and Special
Operations Capable Marine Expeditionary Units. 1,000 of these pistols (470
used and 530 unissued) were traded by the Marine Corps under warranty
back to Colt in exchange for newer Ionbond finished replacements, Colt in
turn released these original Marine Corps pistols to the public with the caveat
that the “USMC” marking be struck out. A set of 3-dot Trijicon night sights are
installed on the “COLT***USMC” (the “USMC” marking has been struck with a large “X”)
marked slide, with U.S. nomenclature on the right. A 4-slot Picatinny rail is integrated into the dust cover,
with a long solid trigger, skeleton hammer, beavertail safety with “speed bump”, ambidextrous thumb safety,
serrated flat mainspring housing, “desert camo” G10 composite grips, Wilson Combat magazine, and a Colt
National Match barrel. Includes original military issued shipping box and certificate of authenticity.
CONDITION: Excellent overall, retaining 98% original finish with light handling/use evidence, and sharp
grip texture. The box is very fine with minor wear. Mechanically excellent. A rare opportunity to purchase a
genuine U.S. Marine Corps semi-automatic pistol, and what is almost certain to be the last Colt 1911 adopted
by the United States Armed Forces.
Estimate: 5000 - 7500
BOTH SIDES
PICTURED
BOTH SIDES PICTURED
328
LOT 423
Documented U.S.
Army Issued SIG Sauer
M17 Semi-Automatic Pistol with
Box - Serial no. TF000437, 9x19mm cal., 4 3/4 inch round
bbl., tan finish, polymer grips. United States Army version
of the SIG Sauer M17 Pistol to replace the Beretta M9 as the
standard U.S. Military sidearm into the future. In January
2017 it was announced that SIG had won the highly competitive U.S. Military contract
and by November of that year the first M17’s were being delivered, with the first units
issued them being the 101st and 82nd Airborne divisions. This pistol is one of the first
pistols issued to these units for field
testing and combat use. Includes a
certificate from Sig stating that this
pistol was fielded by the U.S. Army
for the initial in-theatre and domestic
use,along with the original box and
two extra magazines.
CONDITION: Excellent overall,
retaining 99% original finish, minor
handling evidence, and a few areas of
discoloration on the frame. The box is
excellent. Mechanically excellent.
Estimate: 2500 - 4000

LOT 424
Colt AR-15 Model 639 Select Fire Carbine, Class III/NFA Fully Transferrable Machine Gun from the
Private Collection of Famed Spy, Mercenary, and Sionics Suppressor Designer Mitchell L. WerBell III -
Serial no. 4790061, 5.56 mm cal., 20 inch round bbl., black finish, plastic stock. An export/commercial variant of the Colt
M16 rifle, the base configuration of the Model 639 included a short barrel fitted with a special sound moderator/flash hider designed
to alter the report of the carbine, to make it unrecognizable to forces familiar with standard M16/AR15 family rifles; while not a true
silencer, the moderator was close enough for regulatory purposes to require a second tax stamp, and on this example it has been
replaced with an A4 pattern upper with a closed-bottom bird cage flash hider, “1/7” twist rate marking, bayonet lug, ribbed round
handguard and a detachable rear sight/carry handle assembly. The lower has the “COLT/AR-15” logo on the left side of the magazine
well over “MOD.639/CAL. 5.56MM./4790061”, and the Colt Firearms Division address is stamped near the right handed “SAFE/SEMI/
AUTO” selector switch. It is fitted with a checkered pistol grip and a two-position telescoping buttstock. Includes a plastic hard case.
Magazine absent. Provenance: From the collection of Mitchell L. WerBell III.
CONDITION: Very fine as reconfigured to carbine configuration, with 95% of the matte finish, showing a darker tone on the upper and
a lighter gray on the lower, with scattered mild handling/cycling wear, and some scratches around the castle nut. Some of the ribbing
has been cut flush on the upper left side of the handguard (possibly for installation of a momentary switch), otherwise the furniture
is very good, with mild scuffs and scratches. Mechanically excellent. Provenance: From the collection of Mitchell L. WerBell III. NOTE:
This weapon is a National Firearms Act (NFA), Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives,
(BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Estimate: 20000 - 35000
The Mitchell L. WerBell III Collection
329

LOT 425
Exceptional Colt Model
1921/1928 U.S. Navy Overstamp
Thompson Submachine Gun,
Class III/NFA C&R Registered Fully
Transferrable Machine Gun - Serial no. 13006, 45 ACP cal., 10 1/2 inch round bbl., blue
finish, walnut stock. Originally manufactured by Colt as a Model 1921 Thompson SMG, one
of a number stuck in inventory due to sluggish sales; while today the Thompson is recognized
as an American classic and one of the all-time finest “heavy metal” SMGs, at the time it was a
novel, untested and expensive weapon, and few were willing to roll the dice. The U.S. Marine
Corps was an early adopter, and the firm attempted to capitalize on the connection by adding
“U.S. NAVY” markings to their 1921s, updating the features based on USMC feedback, and
overstamping the “1921” to “1928” to match their newer model. According to Herigstad’s “Colt
Thompson Submachine Gun Serial Numbers and Histories”, this particular Thompson was sold
to the New Hampshire State Police at Concord, New Hampshire, at an unknown date. Blade front
sight on the Cutts compensator and a folding Lyman rear sight, showing the signature cooling fins on the barrel, horizontal forearm, rear pistol grip,
and a quick-detachable hardwood buttstock. The left side of the receiver has the aforementioned “U.S. NAVY” model markings ahead of the 5-line
address and caliber markings, with the Thompson “bullet” logo on top and the Auto-Ordnance address and 6-line patent markings on the right. The
trigger group is numbered to match the receiver on the underside, with separate selector (“FULL/AUTO” and “SINGLE”) and safety (“FIRE” and “SAFE”)
levers. The item is equipped to accept both drum magazines (one Auto-Ordnance “Type L” 50-round included) and stick magazines (four 20-round blued
magazines included). Also included are a number of related papers, brass cleaning rod, a tan canvas transport case, and a tan canvas
drum magazine pouch.
CONDITION: Excellent, with 97% plus of the original blue finish, showing mild edge wear, areas of gray and brown patina, and minor spotting and
handling marks The wood is also excellent, with mild dings and scuffs. The accessories are in good order. Mechanically excellent. NOTE: This weapon is
a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is
classified as a “Curios or Relic” as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Estimate: 35000 - 50000
SERIAL NUMBER LISTED IN
THE BOOK COLT THOMPSON
SUBMACHINE GUN BY HERIGSTAD
330

BOTH SIDES PICTURED
LOT 426
U.S. Property Marked Harrington & Richardson M4
Bolt Action Survival Rifle Class III/NFA C&R Short
Barrel Rifle - Serial no. 13901, 22 hornet cal., 14 inch
round bbl., phosphate finish, steel stock. This is an example
of a “US Air Force” M4 bolt action survival rifle. These rifles
were developed during World War II and were intended as a survival rifle for downed
fighter pilots and bomber crews. They were not really intended as a defensive weapon
but more for hunting and survival. They saw service well into the late 1950s and early
1960s with B-52 bomber crews. Manufactured by H&R at the Worcester, Mass plant, the rifle
has a blade front sight and Lyman 55-H adjustable rear peep sight, matching numbers on the
barrel and receiver, two-line Worcester address on the left side of the barrel/receiver, “RIFLE.
SURVIVAL. CAL .22. M4 (HORNET CARTRIDGE)/U.S. PROPERTY” on the left side of the frame, and
telescoping wire buttstock.
CONDITION: Very fine with 85% original phosphate finish, patches of red/brown oxidation,
handling marks overall, and some visible surface pitting. Mechanically excellent. NOTE: This
weapon is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau
of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a “Curios or Relic” as defined
in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR
part 478.
Estimate: 1800 - 2750
BOTH SIDES PICTURED
LOT 427
Desirable U.S. Inland M2 Converted M1 Fully Automatic Class III/NFA Machine
Gun - Serial no. 916068, 30 Carbine cal., 18 inch round bbl., parkerized finish, walnut stock. An evolution of the M1
Carbine, the M2 was intended to give America’s “second line” soldiers a boost in firepower without excessively disrupting the logistics
train or manual of arms. Essentially a “drop in” assembly, the auto-fire components of the M2 could be swapped in or out as needed; most
M1s so equipped were converted back to semi-auto after the M2 was retired, and few factory-original M2s can be found intact and with
proper registration. With standard fixed blade front and “SA” marked stamped adjustable rear peep sights, Inland barrel dated “11-43”,
“C” marked Type 3 barrel band with bayonet lug, standard “M1” markings on the receiver ring, “SG” marking on left side of receiver body,
parkerized round top bolt, “A” marked selector switch, milled Inland trigger group, “J.A.O” marked toggle safety, “E.I.” marked magazine
catch, and standard markings on the receiver heel. Perch belly low wood stock with correct selector
recess, two rivet “MU” marked handguard, white paint “44” marking on the grip end, “U.S.M.C.” marked
canvas double magazine pouch, and stamped checkered buttplate. Includes conical M3 flash hider,
canvas web sling, and two extra magazines.
CONDITION: Very fine as arsenal converted to M2 specifications with 95% dark arsenal parkerized
finish, some areas of mild edge wear and cycling marks on the receiver rails. The stock is fine
with small dings and dents and rough oxidation visible on the buttplate. Mechanically excellent.
Accessories are fine with some visible oxidation on the extra magazines and flash hider. NOTE: This
weapon is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau
of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and
27 CFR part 478.
Estimate: 8500 - 14000
331

LOT 428
Allied Armament Model 1919A4 Semi-Automatic Rifle with Tripod - Serial no. 849,
7.62x51 cal., 22 inch round bbl., parkerized finish, metal grips. Produced in America with
a new-made semi-automatic sideplate along with Israeli and American military surplus
components, many of which still maintain their serial/assembly numbers. Blade front and
folding ladder rear sights, with a series of Saginaw Steering Gear-style nomenclature
markings on the right side plate and the actual
maker’s marks hidden on the underside
as well as Israeli military markings and
multiple components stamped with
“7.62”. Carry handle mounted to the
perforated heat shield. Includes a
folding field mount, pintle, and the
the traversal and elevation
(T&E) device.
CONDITION: Excellent, retaining 99%
of the parkerized finish with minor
handling/use evidence and light
wear on the T&E device. The tripod
shows scattered light wear with the
vast majority of its brown/tan paint
remaining. Mechanically excellent.
Estimate: 5000 - 7500
332
LOT 429
Ohio Ordnance Works Water Cooled Belt Fed Model 1928
Semi-Automatic Rifle with Tripod - Serial no. WC-401,
7.62x51 cal., 21 1/2 inch round bbl., parkerized finish,
walnut grips. Manufactured by Ohio Ordnance Works as
a faithful reproduction of the Browning M1928 water
cooled, belt fed machine gun. Hooded blade front and
fully adjustable ladder rear sight graduated to 2,700
meters, 19 inch steel and brass water jacket around
the barrel, closed bolt operating mechanism, new
manufactured Ohio Ordnance receiver, right side of
the receiver marked “BROWNING WATER COOLED
GUN/SELFLOADING MODEL OF 1928/U.S. CALIBER
.30/MFGD BY OHIO ORDNANCE WORKS/CHARDON,
OH”, and checkered flip up safety lever. Includes a
brass and steel tripod with traverse and elevation
adjustment, and Colt name plate marked “COLT
AUTOMATIC/MACHINE GUN/TRIPOD/766/MFD. BY/COLT’S
P.T.F.A. MFG. CO./HARTFORD, CONN. U.S.A.”
CONDITION: Excellent overall, retaining 98% original
parkerized finish, minor handling/use evidence, a few dark
spots on the jacket, and some patina on the brass. The tripod is
very fine with some wear and patina on the brass.
Mechanically excellent.
Estimate: 6500 - 8500

LOT 430
U.S. Auto-Ordnance Thompson Model
1928A1 Submachine Gun, Class III/NFA
C&R Fully Transferrable Machine Gun -
Serial no. A.O.C.194A, 45 ACP cal., 11 inch round
bbl., blue finish, walnut stock. Manufactured by
Auto-Ordnance on contract from the United States
Government, the Thompson 1928A1 is one of the
signature American weapons of World War II, being
deployed in every theater of the war, both in American
hands and among numerous Allied units via equipment
sharing and Lend-Lease supplies. The 1928A1 is still very close in overall fit and features to
the original Roaring 20’s/Great
Depression “Chicago Typewriter”
of gang warfare fame, retaining
a number of options that
would be eliminated from later
production to lower cost and
speed production. A number are
believed to have been released
to civilian and law enforcement
buyers, having been left over after
the military transitioned to the
simplified M1 pattern Thompson.
A blade front sight is installed on
the unmarked Cutts compensator,
with a Lyman folding ladder rear
sight on the receiver. The barrel
retains the cooling fins, with a
civilian style pistol grip forearm (as opposed to the more common straight military style handgrip). Commercial standard markings are
present on the top and sides of the receiver, with the “US MODEL 1928A1” marking on the left side of the receiver, no visible inspection
marks, and an unnumbered trigger group with “FULL AUTO”/”SINGLE” selector lever and “FIRE”/”SAFE” safety lever, and a grooved pistol
grip. The stock is the quick detach model with a trapdoor buttplate. One 20-round “stick” magazine is included.
CONDITION: Excellent, with 97% plus of the original blue finish, showing areas of brown patina, scattered light scratches and dings, a few
shallow scuffs on the left side of the receiver near the drum magazine slots, and a few small spots of rust. The wood is also excellent, with
minor dings and scratches. Mechanically excellent. NOTE: This weapon is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is
classified as a “Curios or Relic” as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Estimate: 16000 - 25000 333

BOTH SIDES
PICTURED
LOT 431
Desirable Fully Automatic Class III/NFA C&R Original Smith
& Wesson Model 76 Submachine Gun with Six Magazines
- Serial no. U660, 9 mm Luger cal., 8 inch round bbl., parkerize
finish, steel stock. This is an excellent example of a Smith &
Wesson Model 76 submachine gun developed in the early to
mid 1970s. They were originally designed for use by the police
and SWAT teams but were eventually replaced by the HK MP5
and later the standard Colt M4 carbines. They are very wellmanufactured
SMGs that are similar in design and operation to
the British STEN, Swedish K-45, and the German MP40. They have
round tube receivers with a perforated barrel jacket/barrel nuts
on the end to facilitate rapid and easy barrel replacement. It is
marked on the lower left side with the Smith & Wesson factory
address and “Made in the U.S.A.” with “SMITH & WESSON” on the
side of the receiver. The right side magazine well has the standard
large S&W intertwined factory logo, with “MODEL 76/ U660” on
the rear of the tube. It has an ambidextrous safety with fixed
sights with a rubber covered folding steel wire stock. As noted,
this lot comes with six original 30 round magazines.
CONDITION: Excellent with 98% of the original gray parkerized
finish overall with some light wear on the right front side of the
bolt from cycling and light firing. The folding flat steel stock
retains 98% of its black finish. NOTE: This weapon is a National
Firearms Act (NFA), fully transferable Class 3, which is registered
with the Bureau of Alcohol, Tobacco, Firearms and Explosives,
(BATFE) that is classified as a “Curios or Relic” as defined in 27 CFR,
478.11. These weapons are still subject to the provisions of 18
U.S.C. Chapter 44 and 27 CFR part 478.
Estimate: 9000 - 14000
LOT 432
Wilson Arms Conversion Action Arms/I.M.I Uzi Pistol Fully
Automatic Class III/NFA Machine Gun - Serial no. UP07776, 9 mm
para cal., 4 1/2 inch round bbl., black finish, plastic grips. Originally
manufactured by I.M.I. and imported by Action Arms as a semiautomatic
pistol, this UZI was upgraded by Wilson Arms of Georgia
to a fully automatic machine pistol. Three-dot post front and windage
adjustable rear notch sights, standard Action Arms/I.M.I. importer and maker’s
marks on the right rear of the receiver, model, caliber, and serial number markings
on the left, underside of receiver marked “WILSON ARMS CO./BRUNSWICK, GA.”, three
position “ARS” marked safety/selector switch, and ribbed plastic grips. Magazine absent.
CONDITION: Very fine as converted with 97% black finish, some light edge wear on the
front sight protectors, small surface nicks, and handling marks. The grips are excellent
with some very small dings. Mechanically excellent. NOTE: This weapon is a National
Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of
Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C.
Chapter 44 and 27 CFR part 478.
Estimate: 7500 - 11000
BOTH SIDES
PICTURED
334

BOTH SIDES PICTURED
LOT 433
French MAS St. Etienne ‘MAS 223’ FAMAS Semi-Automatic Rifle with Accessories - Serial
no. SA00140B, 223 cal., 20 inch round bbl., black finish, plastic stock. Manufactured in Saint Etienne for Century Arms of St. Albans,
Vermont, this is a semi-automatic version of the standard French infantry rifle from 1978 to 2016. Built around ‘bullpup’ design
principles and making active use of composites and alloys, the FAMAS (Fusil d’Assaut de la Manufacture d’Armes de Saint Etienne, Assault Rifle made
by MAS) was one of the most distinctive rifles of the Cold War. A limited number were manufactured in semi-auto configuration for the American
market in the 1980s, though with limited success. Adjustable blade front and peep rear sights with flip-up night sights, bird cage flash hider, integral
carry handle and bipod legs, reversible cheek piece and a rubberized buttplate. Five extra magazines are included (note: the FAMAS uses a proprietary
magazine, and is not STANAG compatible), along with a bayonet, cleaning kit, sling, manuals, and a Pelican hard case.
CONDITION: Excellent, with 98% plus original black finish, showing some mild handling marks overall. The bayonet does not fit, but is otherwise in good
condition. Mechanically excellent. A top quality example of an extremely difficult to find sporting arm.
Estimate: 18000 - 27500
BOTH SIDES PICTURED
LOT 434
Scarce and Desirable SIG
Model PE57 Semi-Automatic Rifle - Serial no. PE3311, 7.5 mm Swiss cal., 24 inch round bbl., black
finish, rubber/steel stock. This is a very rare semi-automatic commercial model of the Swiss Sturmgewehr 57 that remained
in use until approximately 1980. These were imported for only a very short time in the early 1980s. Adjustable blade front and
peep rear sight, both folding, with the “Swiss cross in shield” marking on top of the receiver, carry handle, matching numbers
on the barrel shroud, receiver and stock, and 2-position selector switch. Integral muzzle break and bayonet lug. Fitted with a
winter style flip down extended trigger. Vented metal handguard with folding bipod and ribbed rubber grip section, serrated pistol grip, and straight
rubberized buttstock. With matching numbered styrofoam carton, three extra extended magazines, leather sling, and cleaning kit.
CONDITION: Excellent with 99% original black finish scattered light handling marks, and some small dings and scuffs on the grip and buttstock.
Mechanically excellent.
Estimate: 6500 - 8500
335

BOTH SIDES PICTURED
LOT 435
Izhmach Tiger Semi-
Automatic Rifle with Matching Scope and Accessories -
Serial no. 36628, 7.62x54 R cal., 20 1/2 inch round bbl., black finish, plastic/
laminate stock. Manufactured in Russia and imported by B-West of Tucson, Arizona,
the Izhmach Tiger is a close copy of the SVD Dragunov Rifle, only modified to allow importation
after the assault rifle bill came into effect. Hooded post front and tangent rear sights, with the signature
milled receiver dated “1993” and bearing the factory markings on the right side and the import markings and
integral mounting rail on the left. Fitted a smooth plastic forearm and laminate thumbhole pistol grip stock with clamp-on cheek
piece and steel buttplate. Fitted with a tan canvas sling and a PSO-1M2 pattern scope numbered to match the rifle on the base. Included with
the rifle is a canvas field pouch loaded with two extra magazines and a set of cleaning tools.
CONDITION: Excellent, with 97% of the importer black finish, showing some light wear and handling marks overall, along with a few dings on the stock. Aside from the
serial number, the markings are faint. Optics are clear, adjustments in good order, electronics untested. Mechanically excellent.
Estimate: 8500 - 13000
BOTH SIDES PICTURED
336
LOT 436
Norinco Model NDM-86 Dragunov Semi-Automatic Sniper Rifle with Scope - Serial no. 701543, 7.62x54 R cal., 25 inch round bbl., black
finish, laminated stock. A scarce Chinese-made commercial version of the Russian SVD Dragunov sniper rifle. A signature Cold War era weapon of the
Soviet Union, variants of the SVD are scarce on the American market. Hooded post and tangent rear sights with the “26” factory marking over “1979” on
the underside of the receiver, and the model and “CJA SFLD MT” import mark on the right side. Matching numbers are present on multiple receiver components
and the buttstock. Fitted with a flash hider, bayonet lug, smooth ventilated forearm and a thumbhole stock with leather sling. Included with the rifle is a Type 1985
illuminated reticle scope (reticle untested). Magazine absent.
CONDITION: Excellent with 95% original gloss black finish, some scattered surface scratches and nicks, and handling marks overall. The stock and handguard have some
small visible dings, but are otherwise excellent. Mechanically excellent. Scope is excellent with clear optics.
Estimate: 5000 - 8000

BOTH SIDES PICTURED
LOT 437
Very Scarce and Desirable
World War II Soviet Tula Arsenal Tokarev SVT-38 Semi-Automatic Sniper Rifle with Bayonet
- Serial no. 596, 7.62x54 R cal., 24 inch round bbl., blue finish, hardwood stock. This is a model 1938 SVT semiautomatic
rifle that was produced by the Tula arsenal in 1939 that has been arsenal converted into a sniper rifle which is fitted with a straddle type
top mount with a 1941 dated PU (Progress) sniper scope. The Tokarev rifles were manufactured throughout WWII by both the Tula and Ishevsk arsenals. These earlier models saw limited success as they had a tendency to
jam which was corrected in the 1940 SVT models. The top of the receiver has Tula arsenal “star” proof over “1939”. It has the standard military hooded front sight and a tangent rear sight graduated 1-15 (100-1500 meters). The left
side of the receiver is stamped with the original Cyrillic prefix serial number “SD596” It is fitted with the standard Russian hardwood stock, ventilated handguard, and correct short perforated metal forend typically used on the 1938
models. The end of the barrel is fitted with six slotted muzzle brake and the stock has the side mounted cleaning rod. The right side of the stock is dated “1939” and the left is stamped with the matching serial number. The trigger
guard, bolt, and magazine are non-matching. The rear of the rifle receiver was modified to accept a WWII Soviet sniper scope mount, which is now fitted with a short WWII PU type sniper scope. The rear of the mount is stamped
with the small markings of “NI391”. The scope itself is marked on top with the “Russian Hammer and Sickle/1941/No.28242”. Includes bayonet, sheath, and correct period SVT-38 canvas web sling.
CONDITION: Fine with 60% original blue finish remaining, areas of high point and edge wear throughout, dented front sight hood, scattered nicks and scratches overall, and areas of mixed gray/brown patina. The repaired and
re-oiled stock is fine with a 2 inch area of filler visible on the right side, legible but faint stamps, small dings overall, and some visible larger dents and bruises. Mechanically excellent. Scope is fine with clear optics.
Estimate: 5500 - 7500
BOTH SIDES PICTURED
LOT 438
World War II Soviet Tula Arsenal Mosin-Nagant Bolt
Action Sniper Rifle with Very Scarce PE Top Mount Scope and Base - Serial no. 127799,
7.62x54 R cal., 29 inch round bbl., blue finish, hardwood stock. This is a very desirable example of a pre-war
Soviet Mosin Nagant 1891/30 sniper rifle fitted with a early top mounted 4X PE sniper scope. These are fairly rare as most were decommissioned and
converted into standard service rifles at the end of WWII. During WWII, the Red Army fielded more active snipers than any other country in the war and probably most
countries combined. During the battle for Stalingrad, they proved to be devastating to the German Army, racking up hundreds of confirmed kills during a 6 month period. This rifle is marked on the rear
barrel shank with the “Tula Star/1935/127799” with the scope base secured with three screws on both the right and left sides. The scope is the early PE sniper scope with the adjustable rear objective, which is marked
with the small oblong identification block with”NA325/Russian Hammer and Sickle/1934”. The scope has the correct windage and elevation dials, with the elevation dial graduated 1-14 (100-1400). The scope is fitted in an original
PE top mount that has a small Tula Star proof on the front right side and serial number “T191” stamped on the right rear side. The rifle has the standard front and tangent rear sights which are graduated 1-20 (100-2000 meters).
It is fitted with a sniper bolt that has the bent down bolt handle and is numbered to match on the side. It is fitted with a Russian hardwood stock with the short finger grooves on the sides that has a smooth matching numbered
stamped steel buttplate. The right side of the buttstock has a faint Soviet cartouche. Includes a canvas web sling and leather lens caps.
CONDITION: Very fine with 80% original blue finish remaining, areas of thinning and edge wear, and mixed brown/blue patina on the magazine and trigger guard assembly. The markings and clear and legible. The re-oiled stock is
also fine with small scattered dings throughout, light markings, and some deeper dents and scratches. Mechanically excellent. Scope is very fine with visible wear on the exterior, and mostly clear optics.
Estimate: 4000 - 6000
BOTH SIDES PICTURED
LOT 439
Pre-World War II Soviet M91/30 Mosin-Nagant Bolt Action Sniper Rifle with
Desirable PU Scope - Serial no. 217637, 7.62x54 R cal., 29 inch round bbl., blue finish, hardwood
stock. This is a very fine representative example of a WWII Soviet M91/30 Sniper rifle with the correct side
mounted PU type scope base. Hooded pin front and tangent rear sights, barrel dated “1937” with standard Izhevsk arsenal mark and proofs, un-numbered Tula marked scope base attached to the
left side of the round body, low wall receiver with four staked screws, adjustable scope mount numbered “118” with matching numbered rings, “1938” dated PEM (Progress) scope, matching numbered
bent bolt, and renumbered magazine floorplate. The upper receiver tang is also dated “1937”. Correctly inletted hardwood stock with full length upper handguard, metal bushings around the sling cut outs, Soviet
arsenal re-work marking on right side of butt, and matching numbered blue steel buttplate. Includes canvas web sling.
CONDITION: Very fine as arsenal refurbished with 85% thick arsenal reblued finish remaining, areas of high point and edge wear, and small surface nicks and scratches throughout. The stock is also very fine with scattered small
dings, clear stamp on right side, some loss of the black enamel finish on the brass handguard ends, and visibly spliced (arsenal) toe. Mechanically excellent. Scope is excellent with some small scratches and dings, and clear optics.
Estimate: 4000 - 6000
337

Documented G.I. War Trophy WWII German K98K Single Claw Sniper Rifle with Matching Scope Mount & Can
SERIAL NUMBER 9445C
338
LOT 440
Rare Documented German
World War II K98K BNZ Sniper
Rifle with Matching Scope, Can, and GI Shipping Crate
- Serial no. 9445c, 8 mm cal., 24 inch round bbl., blue finish,
laminated stock. This Late 1944 production K98K single
claw sniper rifle was manufactured by Steyr-Daimler (“BNZ”
code). The rifle is complete with original sling, lens caps,
muzzle cover, cleaning rod, matching scope and matching
serial numbered can. In addition, the rifle retains the
original wooden crate in which it was shipped to the United
States after World War II. The rifle is illustrated on page 120
of “SNIPER VARIATIONS OF THE GERMAN K98K RIFLE” by
Richard D. Law. The rifle mounts a Hensoldt & Sohne (code
“BMJ”) Dialytan 4x telescopic sight, serial number “75422.”
The telescopic sight body is stamped with a “+” behind the
maker’s code indicating it was suitable for cold weather
operations. The single claw mount is similar to the pattern
developed in World War I that utilized a single locking claw to
attach the telescopic sight to bases soldered to the receiver
rings. The rifle serial number is located on the left side of the
barrel ahead of the breech, on the left side of the front scope
base and mount, on the forward face of the rear scope base
and mount, on the bolt handle, cocking piece, striker, safety,
floor plate and upper and lower barrel band. The right side
of the barrel is stamped with the “AVK” manufacturer’s code.
The bolt is equipped with a special milled safety to facilitate
use of the telescopic sight. The barrel bands are the stamped
and welded, first pattern secured with a spring retainer on
the right side. The floor plate and trigger guard are the late,
stamped pattern. Rifle components have a dull, military blue
finish. The telescopic sight has a polished blue finish. The
stock is the late pattern with laminated wood and checkered
butt plate. The barrel is stamped with a firing proof
centered just ahead of the breech. Two “eagle/WaA77” army
acceptance marks are stamped on the right side of the barrel
below the rear sight. The bolt has an “eagle/77” stamp on the
body near the face, two similar stamps under the handle,
on the cocking piece, striker, and safety. The trigger guard
and floor plate are marked
with “eagle/135” acceptance stamps. The
right side of the stock bears a crisp “eagle/
swastika/H” army proof below the stock disk.
The brown leather sling has a cross hatched
pattern. The black, cowhide lens caps have
a partially obscured “eagle/WaA” mark on
one cover. The scope can is stamped with
the rifles serial number on the lid along
with an “eagle/swastika” acceptance
mark and “JVB”. The can has been
repainted black and marked “DON
FOX McCONNELSVILLE, OHIO”
in artfully applied white letters.
The rifle is complete with the
handmade wooden case in which
it was shipped to the United States
from Germany after World War II.
The crate which has numerous
Engineer markings stenciled on
the interior is addressed: “TO
MRS. NELLIE B. FOX/915 MAIN ST./
McCONNELSVILLE OHIO.” The return address
is “FROM CHARLES D. FOX 35279621/CO B 942 ENG. AVN.
TOPO. BN./A.P.O. 634/ C/O P.M.N.Y.N.Y.” The crate retains the
four .20 cent stamps and one 2 cent.
CONDITION: Excellent, as issued condition and appears to
have been taken directly from factory or ordnance storage
as a war trophy. The only exception is a professionally
renumbered original pattern bolt and forward band. 98%
of the original finish is present on the balance of blued
components. The telescopic sight optics are crystal clear. The
stock and handguard are both in excellent plus condition.
The sling, lens cover, and muzzle cover are also near new.
This is a late production “BNZ” single claw sniper rifle in near
mint condition with great G.I. trophy provenance. It would
be nearly impossible to improve upon this rifle!
Estimate: 18000 - 27500
NOTICE THE SCOPE AND MOUNT
ARE NUMBERED TO THE RIFLE

BOTH SIDES PICTURED
LOT 441
Exceptional and Desirable DWM Model 1906 Second Issue Navy Luger Semi-Automatic Pistol - Serial no.
541b, 9 mm cal., 6 inch round bbl., blue finish, walnut grips. This is a exceptional example of a highly desirable DWM Model
1906 Second Issue Navy Luger. About 2,000 Second Issue Navy Lugers were manufactured and fall in the 9000a to 998b
serial number range. The pistol has the standardized “GESICHERT” marking on the upper safety position. It also has the correct
blank chamber, and the left side of the barrel extension is marked with a single “crown” proof followed by two “crown/M” German Navy
proofmarks. The barrel is stamped with a “crown/M” proof on the bottom, a “crown” proof on the left side along with the matching serial number and letter suffix. A “crown”
proof is stamped on the left side of the breechblock, and the front toggle link is marked with the DWM scroll. It is fitted with a six-inch barrel, two-position Navy adjustable
rear sight and a stock lug. Excluding the magazine, external numbers are matching, with additional
matching numbers on the trigger, extension, and toggle assembly. Fitted with straw finished small
parts, niter blue pins and springs, checkered grips and a correct replacement nickel finished magazine
with a concentric ring decorated wood base numbered “5429”.
CONDITION: Exceptionally fine, with 95% of the original blue finish, showing bright wear on the high
edges, a few scratches on the sideplate, left side of the frame, and gripstraps, mild spotting and light
handling marks. 70% of the refinished straw color (over light pitting) is present on the small parts. The grips
are very fine, with some dings and dark spots. Mechanically excellent.
Estimate: 5000 - 7500
BOTH SIDES PICTURED
GERMAN SUBMARINE U-889
LOT 442
Historic World War II Mauser “41/byf” P.08 Black Widow Luger Semi-
Automatic Pistol with Holster, Documented as the Captured Sidearm of
a German U-Boat Officer - Serial no. 9159q, 9 mm cal., 4 inch round bbl., blue
finish, plastic grips. Two pieces of documentation are included with this pistol.
The first is a 1949 British Columbia small arms registration form, identifying this
pistol by serial number (sans suffix, but otherwise matching) as a souvenir owned
by Theodore Allen Coney, then a logger in Port Alberni. The second piece is a
letter signed by Coney, where he relates the story of how he got the pistol. During
World War II, Coney was an Able Seaman aboard the HMCS Buckingham, a Riverclass
frigate with the Royal Canadian Navy. In May of 1945, along with the HMCS
Inch Arran, Buckingham was responsible for boarding and securing the submarine
U-889 off Newfoundland in preparation for their official surrender. Coney was one of
the boarders, tasked to neutralize the u-boat’s deck gun and discard their small arms.
During this process, he supplied an unnamed Kriegsmarine officer cigarettes, and was
invited by the officer to retain his service Luger instead of tossing it overboard. Blade
front and notch rear sights, the “41” date on the chamber and “byf” factory code on
the front toggle link. “Eagle” firing proofs are present on the barrel, breech block and
HMCS BUCKINGHAM
extension, and the barrel and
extension are also stamped
with “eagle/655” proofs. Full
blue finish, with checkered
“black widow” style grips.
Two blued magazines with
alloy bases are included,
one numbered to match
(with “+” spare magazine
mark), and the other
numbered to a different
Luger. Includes a black
leather holster marked “DLU/1942” and “WaA641” on the back and a trimmed-down flap and body. Comes with Michael Hadley’s “U-Boats against Canada”, a second BC small
arms registration form showing Theodore Allen Coney was still the owner of this pistol in 1964, a partial original WWII period newspaper article reporting the capture of U-889,
and a November 1995 issue of “The Bulletin Chief & Petty Officers’ Association” detailing the surrender of U-889. U-889 was eventually scuttled in late 1947 after the U.S. Navy
used it for torpedo trials off New England.
CONDITION: Fine, with 70% of the original blue finish, showing bright wear on the edges and high points, scattered minor spotting, a mixed brown/gray patina on the grip straps, and mild handling marks. The grips are also fine,
with some minor dings. The holster is modified, with mild scuffs and cracks. Mechanically excellent.
Estimate: 3500 - 5500
339

The Estate of William T. Prichard
340
LOT 443
DWM Model 1920 Luger Semi-
Autmatic Carbine with Stock
- Serial no. 10, 7.65 mm Luger
Auto cal., 12 inch round bbl., blue finish, walnut grips. Designed
as a lightweight and agile sporting arm for taking light game, the heart of the Luger
Carbine is an enlarged Luger pistol, with a steel hanger integrated into the front of the frame to serve as a
mount for a spring accelerator equipped forearm, which in turn helps properly cycle the extended barrel, and a 1908-style
stock lug on the back strap. Fitted with ramped polished bead front sight and 4-position sliding notch rear sight on the barrel.
The blank chamber is proofed “crown/N” on the left side, with a “GELADEN” marked extractor on the round-top bolt, “DWM”
marked front toggle, and knurled toggles. The left side of the frame is marked “MADE IN GERMANY”. The underside of the barrel
and receiver are numbered “10”, with “98” on the trigger, “20” on the rear toggle link, and “1./4014” on the magazine base and the
other components unnumbered. The furniture is checkered, with a schnabel-tipped forearm and a hardwood buttstock
with a checkered steel widow’s peak buttplate.
CONDITION: Fine as assembled (see above), with 75% of the blue finish, showing areas of brown and gray patina, a small
amount of pitting, and scattered handling and cycling marks. The wood shows some light dents and scuffs, with filler
material present around the mounting iron on the refinished buttstock. Mechanically fine.
Estimate: 3500 - 5500
LOT 444
World War I Imperial German DWM Model 1914 Navy Luger
Semi-Automatic Pistol with Navy Board Stock and Holster
- Serial no. 3862a, 9 mm Luger cal., 6 inch round bbl., blue finish,
checkered wood grips. This is a late WWI DWM Model 1914
German Luger pistol as issued to the Imperial German Navy. The model of 1914 is easily identified
as it lacks the grip safety and is dated over the chamber (1917) and again on the left frame rail and
left side of the front sight base. They also have the standard, longer 6 inch barrel with a fixed front
sight and the Navy, two position adjustable rear sight. The rear sight is graduated for 100 and 200
meters. It has the standard DWM monogram on the front toggle. The left side of the barrel and barrel extension are
both stamped with the appropriate “crown” and “crown/M” proofs. It comes with an original non-matching WWI Navy
magazine with the nickel-plated body and the unmarked Navy style wooden base. It has a blued metal finish, straw
colored smaller parts, and checkered walnut grips. The left grip is unmarked and the right grip has been marked on the
back side in white paint with “3862 NAVY”. It is complete with a non-matching serialized earlier production Navy walnut
board stock, with a blued attaching iron that is numbered, “7309/e”. It also includes a leather holster. The holster is stamped
on the inside with “LOHSOHNE/Berlin” and is complete with a reproduction takedown tool inside the holster.
CONDITION: Very fine with 85% plus of the original blue finish overall, edge and high spot wear, and blue loss on the side plate,
muzzle and front edges of the frame rails mixed with some browning/oxidation on the lower edges of the grip straps. The smaller
parts retain 50% of their original straw colors. The grips are also in very fine condition with nice distinct checkering and light
handling marks. The stock is in very good condition with light handling marks and scratches on the sides. The holster is in fair
condition with the stitching intact; however, the face of the leather shows age cracking and some of the surface leather flaking off.
Estimate: 3250 - 4750
LOT 445
DWM World War I German 1914 Artillery Luger Semi-
Automatic Pistol Dated 1916 - Serial no. 2628b, 9 mm cal., 8 inch
round bbl., blue finish, walnut grips. This pistol has the ‘fine tune’
nine-position adjustable rear sight and adjustable front blade sight.
The top of the chamber is dated “1916” and the “DWM” logo is on the toggle. The
right side of the barrel extension is marked with three crown over Gothic letter
proofs and the Imperial Eagle. The right rear of the barrel and left side of the breech block are also marked
with the Imperial Eagle. The complete matching serial number is marked on the left side of the barrel extension,
front of the frame and on the bottom of the of the barrel, with the partial number “28” marked on most of the
small parts including the locking block, sear bar assembly,
trigger and the inside of both grip panels. The bottom of the
barrel is marked with a “crown/M”, the safety and extractor
are properly marked and the back strap is remarked “M/
anchor/1183/N”. Rust blue finish with straw colored small
parts, unmarked nickel magazine with wooden bottom and
fitted with checkered walnut grips.
CONDITION: Very fine. The pistol retains 70% of the original
blue finish with a mottled gray patina forming on the barrel and a smooth mottled brown patina on the grip straps. There
is some high edge wear and some light spotting. The back strap has a questionable, added naval mark. Most of the original
straw color remains on the small parts. The grips are fine, with a few minor dings and nicks, and crisp checkering. The
markings are clear. Mechanically excellent.
Estimate: 2000 - 3000
LOT 446
Scarce Shoulder Stock for a
Borchardt Semi-Automatic
Pistol - Manufactured
without maker’s marks or serial
numbers, this is an excellent example of
a shoulder stock for a DWM Borchardt Pistol.
Much as the Borchardt was a
predecessor for the more
famous Luger pistol, the
Borchardt’s stock was the
forerunner for the later
Luger Artillery/Navy stock
arrangement, with a thin
but rugged board serving
as both the stock and a
BOTH SIDES PICTURED
mounting point for a leather holster, in contrast to the larger and more fragile Mauser arrangement.
The mounting hardware is blued steel, with a ribbed thumbscrew for tightening the stock onto
the lug, and a hardwood cheekpiece is mounted to the left side. The right side is contoured to
accommodate the holstered pistol, and is fitted with a steel mounting bracket for the included
shoulder strap.
CONDITION: Excellent, showing 90% plus original blue, some light dings and handling marks on the
very fine original wood. The leather is good and shows minor wear and cracking. This is one of those
accessories that you wish you would have purchased, because they don’t come up very often!
Estimate: 3000 - 5000

BOTH SIDES PICTURED
LOT 447
Very Scarce Bergmann Model 1896 Number 2
Folding Trigger Semi-Automatic Pocket Pistol
- Serial no. 274, 5mm Bergmann cal., 3 inch octagon
bbl., blue/straw finish, walnut grips. This is an exceptional
example of a seldom found Bergmann Model 1896 Number 2 semiautomatic
pistol that was produced by V. Charles Schilling in Suhl. Theodore
Bergman was a pioneer in developing semi-automatic pistols in Europe in the
late 1890s and early 1900s. The magazine is integral to the pistol and is located in
front of the trigger and has a magazine cover that swings down. This early pocket model is actually even more rare in that it has
the early style folding trigger, which was dropped from the later models. The right side of the pistol has an oval shaped logo that
depicts a “mountain man” holding a pick behind his back with sun rays showing from behind his back. The top of the oval is marked
“Gaggenau,” and the lower area is marked “V.C.S./SUHL”. The left side of the barrel/receiver area has a “double crown” proofmark
followed by “611”, and the left side of the frame is marked “PATENT/BREVET/S.G.D.G.” The serial number “274” is stamped on the
right front side of the frame. Fitted with fully checkered grips with a lanyard loop on the butt.
CONDITION: Extremely fine with 85% original blue finish remaining, areas of mild edge wear, scattered surface scratches and
nicks, and 70% original straw colors on the small parts. Grips are also very fine with a barely noticeable small chip absent the top front of the left panel,
mildly worn checkering, and some small dings. Mechanically excellent.
Estimate: 6000 - 9000
BOTH SIDES PICTURED
LOT 448
Bergmann Model 1896 Number 2 Semi-Automatic Pistol with Scarce Westley Richards
Retail Marking - Serial no. 1379, 6.5 mm Bergmann cal., 4 1/4 inch round bbl., blue/straw finish,
walnut grips. Manufactured by the firm of V. Charles Schilling of Suhl, the Bergmann was developed
in the mid 1890s, improved upon by Louis Schmeisser, and was produced in limited numbers. Blade
front and notch rear sights, German “crown/crown/U” proofs, the Schilling “mountain man” logo on
the right side of the frame, and a series of numbers on the individual components to denote order of
disassembly. Fitted with a straw finished trigger and hammer, niter blue safety,
and checkered walnut grips. The left side of the upper assembly is marked
“WESTLEY RICHARDS & Co.” Includes a modern custom fitted hardwood case
with green felt lining.
CONDITION: Very fine with 80% original blue finish, very clear markings, areas
of high point and edge wear, visible marring on most of the screw heads,
scattered scratches and nicks, and mixed brown patina on the grip straps. The
small parts have 30% original straw finish with the balance a mix of dark and
bright patina. The grips are also fine with moderately worn checkering, and
visible dings. Case is very good with exterior dings and scratches.
Estimate: 3500 - 5500
341

The Robert Young Collection
342
LOT 449
Mauser “1938” Date,
“S/42” Code P.08 Luger
Semi-Automatic Pistol
with Kriegsmarine North
Sea Navy Markings and
Holster - Serial no. 148i,
9 mm cal., 4 inch round
bbl., blue finish, walnut
grips. Blade front and notch
rear sights, “1938” on the
chamber, “S/42” on the toggle
link, “eagle/63” proofs on the
extension and barrel and “eagle”
firing proofs on the barrel,
extension, and breechblock.
The finish is full blue, with a set
of checkered grips, and a blue
finished alloy base magazine. The
backstrap is marked “N/2940” and
the magazine base “N2955X”, both
in the style of equipment issued by
the Kriegsmarine from depots on the
North Sea (Nordsee). (Of note, page
182 of “Axis Pistols Volume II” by Jan C.
Still lists the aforementioned 1938 S/42
P.08 “serial number 2224i, N2955” as a
known gun!) Minus the correct pattern
magazine, numbers are matching overall.
Includes a black leather holster, marked
“WILH.BRAND/HEIDELBERG”, “1938” and
“droop eagle/WaA204” on the back.
CONDITION: Very fine, with 85% of the
original blue finish, showing bright wear
along the edges, areas of brown patina
and mild spotting, and some light handling marks. The varnished grips are fine, with some dings and dark spots.
The holster is good, with a restitched flap, mild scuffs, and some stains. Mechanically excellent.
Estimate: 3000 - 4500
LOT 450
Mauser “K” Date “S/42”
Code P.08 Luger Semi-Automatic Pistol - Serial no.
3462, 9 mm cal., 4 inch round bbl., blue finish, checkered
walnut grips. Part of the early post-Weimar German re-armament
program, the “K” date Lugers were manufactured in 1934 in
violation of the Treaty of Versailles. Fixed sights, with the “K” date
on the chamber, “S/42” code on the front toggle link, “S” (mixed block and script
style) on multiple components, “B][90” on the extension, “O][37” on the extension and
barrel and “droop wing eagle” firing proofs on the barrel, extension and breechblock.
Some small parts are straw finished, with niter blue pins and screws, and a bright finished
alloy base magazine marked “S/3819/+/B90”. Aside from the magazine, numbers are
matching overall, including the grips.
CONDITION: Fine, with 40% of the original blue finish, showing areas of mixed brown and gray
patina, bright wear on the gripstraps, mild spotting and light handling marks. 50% of the bright
straw color remains, strongest
in the protected areas, with a
mixed gray and minor spotting
on the remainder. The grips are
also fine, with some dents and
dark spots.
Mechanically excellent.
Estimate: 2250 - 3250
LOT 451
World War II Mauser 42
Dated “byf” Code P.08
Luger Semi-Automatic
Pistol Rig with Holster -
Serial no. 9251i, 9 mm para
cal., 4 inch round bbl.,
blue finish, walnut grips.
Inverted “V” blade front and
fixed notch rear sights, “42”
dated chamber, “eagle/135”
acceptance marks and “eagle”
firing proof on right side of
barrel extension, “byf” Mauser
production code on the center
toggle, matching serial numbers
on front of frame, underside
of barrel, and left side of barrel
extension, matching partial “51”
serial number on the small parts,
and “P.08” marking on left side of
frame. With checkered grips and
post-war production blue magazine
with black plastic base. Includes postwar
black leather holster
and extra magazine.
CONDITION: Excellent with 95% original blue
finish, some holster wear on the muzzle and
sideplate, small scratches, and handling marks
overall. The grips are also excellent with sharp
checkering and just a few small dings. Mechanically excellent. Holster is excellent with some exterior scuffs, tight
stitching, light cracking on closure strap, and overall solid construction.
Estimate: 1600 - 2500
LOT 452
World War I 1917 Dated DWM Model 1914 Artillery
Luger Semi-Automatic Pistol with Snail Drum Magazine
- Serial no. 5780, 9 mm para cal., 7 3/4 inch round bbl., blue/
straw finish, walnut grips. Fine adjustment inverted “V” blade front
and tangent rear sight graduated from 100 to 800 meters with fine
adjustment notch, “1917” dated chamber, “DWM” monogram on the toggle, “crown/
letter” proofs and
“imperial eagle” firing
proof on right side
of barrel extension
and barrel, matching
numbers on the
barrel, frame, and
left side of barrel
extension, matching
“80” partial serial
number on the small parts, blue finish with straw colored small
parts and nitre blue screws, springs, and pins, and checkered
grips. Includes a first pattern AEG Berlin 32 round snail drum
magazine with telescoping winding lever, machine gun adaptor sleeve, and dust cover.
CONDITION: Fine with 75% original blue finish, patches of light oxidation and surface pitting,
areas of high point and edge wear, numerous scattered scratches throughout, and areas of
mottled gray/brown patina. The grips are also fine with dings and bruises throughout, and
some flattened checkering. Mechanically excellent. Snail drum magazine is fine with 60% of
the original finish, areas of gray patina and mild oxidation and small dings.
Estimate: 1800 - 2750

An Excellent Selection of American Eagle Luger Variants
LOT 453
DWM Model 1902
American Eagle Fat Barrel Luger
Semi-Automatic Pistol in 9mm with Ideal Shoulder Stock Holster -
Serial no. 22596, 9 mm cal., 4 inch round bbl., blue finish, hardwood/metal grips.
The Model 1900 was DWM’s first true commercial production Luger, and the
American Eagle variant was intended specifically for the lucrative United States
market. This particular example is the successor Model 1902 which is outfitted with the “fat” profile barrel
to accommodate the more powerful 9mm Parabellum cartridge and a pair of Ideal grips and the matching holster/
shoulder stock; patented in 1901 and manufactured in Los Angeles, the Ideal system was the best game in town until
DWM integrated their own stock lug into the back strap on 1908 Lugers, effectively killing the market for 3rd party stocks.
The markings and features are proper for an early Luger, with the American Eagle on the chamber, “GERMANY” on the front
of the frame, flat top breechblock, dished toggles with spring loaded lock, and a wide grip safety. The finish is in a well-polished
rust blue with nitre blue pins and springs and straw finished small parts. The grips have a smooth hardwood exterior covering the
mounting hardware, and the magazine is nickel finished with a wood base remarked “Cal 9m/m”. The holster is built with a black leather body suspended
inside a tubular steel frame, with a reversible spring loaded belt clip.
CONDITION: Very fine, with 80% of the original blue finish, showing areas of gray patina, bright edge wear, and light handling marks. 60% original straw
colors remain. The grips are fine, with some scuffing and scratching of the wood. The replacement, remarked magazine is good with dents in the body. The
holster stock is very fine, with some cracking and scuffing of the otherwise fine, intact leather, 60% bright original blue with the balance a brown patina on
the metal, and some absent pins. Mechanically excellent.
Estimate: 5500 - 8000
LOT 454
Excellent DWM Model 1900 American
Eagle Luger Semi-Automatic Pistol with Ideal Shoulder Stock Holster
- Serial no. 13485, 7.65 mm Luger Auto cal., 4 3/4 inch round bbl., blue finish,
hardwood/metal grips. Manufactured in a serial number range of 2,000-19,000, the
Model 1900 was DWM’s first true commercial production Luger, and the American Eagle variant
was intended specifically for the lucrative United States market. This particular example is outfitted with
a pair of Ideal grips and the matching holster/shoulder stock; patented in 1901 and manufactured in Los Angeles, the
Ideal system was the best game in town until DWM integrated their own stock lug into the back strap on 1908 Lugers,
effectively killing the market for 3rd party stocks. The markings and features are proper for an early Luger, with the American
Eagle on the chamber, “GERMANY” on the front of the frame, flat top breechblock, dished toggles with spring loaded lock, and
a wide grip safety. The finish is in a well polished rust blue with nitre blue pins and springs and straw
finished small parts. The grips have a smooth hardwood exterior covering the mounting hardware, and
the magazine is nickel finished with an unmarked wood base. The holster is built with a black leather body
suspended inside a tubular steel frame, with a reversible spring loaded belt clip and single lanyard ring.
CONDITION: Excellent, with 90% plus of the original blue finish, showing areas of brown patina, bright edge wear, minor
spotting and scattered handling marks. 80% original straw color is present on the small parts, with some minor spotting.
The grips are very fine, with a few light dings and dents, and the very fine stock shows some cracking and scuffing on
the intact leather and 75% bright original blue with patches of pitting on the metal. Mechanically excellent.
Estimate: 5000 - 7500
BOTH SIDES PICTURED
BOTH SIDES PICTURED
LOT 455
Excellent DWM Model 1906 American Eagle Commercial Luger Semi-
Automatic Pistol in Scarce 9mm Caliber - Serial no. 45190, 9 mm cal., 4
inch round bbl., blue finish, walnut grips. Manufactured with an eye for the
perpetually arms-hungry American market, the 1906 Luger was state of the
art European military firepower in an eye pleasing package showing all the fit
and finish one would expect of German craftsmanship. This particular Luger
is fitted with the “fat” profile barrel and chambered for the then-new 9 mm Parabellum cartridge. Brass barleycorn period, possibly retailer
installed front and “V” notch rear sights, with the “American Eagle” on the chamber and the “GERMANY” import mark on the front of the
frame, and the “DWM” monogram on the toggle. The lower safety position is polished bright and the extractor has the English “LOADED”
chamber indicator marking on the left side. Finish is a high polish blue overall with straw colored controls, bright safety bar, and niter
blue pins and screws. Fitted with a pair of sharply checkered walnut grips and an exceptional period correct replacement nickel finished
magazine with an unmarked hardwood base. (This pistol would have had a “Cal 9m/m” marked bases originally.)
CONDITION: Excellent, with 98% plus of the original blue finish, showing some bright edge wear, minor spotting and light handling marks.
90% of the bright straw color is present, 95% bright original niter blue present on the pins and sear spring. The grips are also excellent, with
some minor dings. Mechanically excellent.
Estimate: 4500 - 6500
BOTH SIDES PICTURED
343

The Robert Young Collection
LOT 456
Walther Party Leader
PPK Semi-Automatic
Pistol - Serial no.
223277k, 7.65 mm auto
cal., 3 1/4 inch round
bbl., blue finish, plastic grips.
Known officially as the “Honor Weapon
of the Political Leaders,” PPK pistols with these
special grips were presented to NSDAP officials
for meritorious party service. This example falls in
the second range identified by Rankin. Fixed sights,
the Walther banner, two line address and patents, and
“Mod.PPK” on the left side of the slide, pre-1940s commercial “crown/N” proofs
on the slide, chamber and muzzle, and matching numbers on the steel frame and
inside the slide. The brown plastic, one piece, wrap around grips are checkered
and have the NSDAP eagle holding a wreath encircled swastika insignia cast on
the top of the both sides, and the magazine is fitted with a
brown plastic grip extension.
CONDITION: Excellent, with 95% of the original blue finish, showing some bright
wear along the high edges, minor spotting on the barrel, and mild handling marks.
The grip is fine, with some slight warpage, bending out at the corners and small
chips absent from the edge. Mechanically excellent.
Estimate: 4000 - 6000
LOT 458
Rare
Persian
Contract
Walther
Model PP
Semi-Automatic
Pistol - Serial no. 117667P,
9 mm Kurz (380 Auto) cal., 3 3/4
inch round bbl., blue finish, plastic grips.
Manufactured in 1939, this pistol is part of
a seldom encountered 200-piece contract
run for the government of Persia integrating a
number of uncommon features. In addition to the
larger caliber, the standard side markings have been moved to the right side,
making room for a Persian crest flanked by Farsi markings on the left, with the
(transliterated) number “6667” vertically on the left side of the frame opposite
the serial number, and a butt-mounted ambidextrous magazine catch, with a
Walther 9mm magazine properly uncut for a conventional button catch. The
“crown/N” and Farsi proofs are concealed by the slide on the left side of the
chamber hood and barrel and in the top interior of the slide, with the matching
partial number hand marked inside the slide. Fitted with a 60 degree safety, ring
hammer, and checkered Walther banner grips.
CONDITION: Excellent, with
97% plus bright original high
polish blue finish, showing
some minor edge wear and
handling marks overall. The
refinished safety lever shows
most of the nitre blue. A
number of vertical scratches
are present on the right side
of the frame. The grips are
very fine and show some
light scratches and dents.
Mechanically excellent.
Estimate: 5500 - 8500
NOTICE THE STANDARD SLIDE MARKINGS ARE ALL LOCATED
ON THE RIGHT SIDE OF THE SLIDE TO ALLOW SPACE FOR THE
PERSIAN CREST AND FARSI MARKINGS ON THE LEFT SIDE.
344
LOT 457
Pre-World War II Walther PPK .22 LR Semi-Automatic Pistol with Holster - Serial no. 175634K, 22 LR cal., 3
1/4 inch round bbl., blue finish, plastic grips. This pistol has fixed sights with the Walther banner, address, caliber
and model markings on the left side of the slide, “Crown/N” proofs on the slide, muzzle and chamber hood, and
a matching partial serial number properly hand-scribed inside the slide, cut into one of the machined weightreduction
grooves. It is fitted with a ring hammer, 60 degree safety, wraparound checkered plastic grips, and a
matching colored magazine extension. A brown leather Albrecht Kind holster.
CONDITION: Excellent, with 95% of the original blue finish, showing some bright wear along the high edges and
mild handling marks overall. The grip is fine, bending slightly at the corners and showing some light scuffs and
dings. The holster is fine, with some minor scuffs, stains and verdigris. Mechanically Excellent.
Estimate: 2000 - 3000
LOT 459
Desirable Party
Leader Holster for Walther
PPK Pistol - Manufactured
from fine brown leather in the
traditional double-flap configuration,
this holster bears a prominently stamped
Party Eagle on the top flap. Intended for issue
to members of the party leadership who had
distinguished themselves in their fields, the holster
would be issued in conjunction with the “Honor Weapon
of the Party Leaders”, a Walther PPK semi-automatic pistol
more commonly known as the “Party Leader Walther”. The lower
flap is deeply stamped “D.R.G.M.” above the Kind “Akah” trademark,
with a blue “WALTHER/P.P.K.” ink marking inside the top flap, and a
single belt loop on the rear.
CONDITION: Fine with attractive brown color, tight stitching, overall solid
construction some exterior scuffs and scratches, and some mild discoloration. An additional
hole has been drilled in the back of the holster loop.
Estimate: 1500 - 2500

LOT 460
Excellent World War II German Series II “P” Code Commercial
Contract Krieghoff Luger Semi-Automatic Pistol in Very Scarce
7.65mm Luger Auto - Serial no. P63, 7.65 mm Luger Auto cal., 4 inch
round bbl., blue finish, plastic grips. This is a very rare late Series II “P” Code
commercial Luger pistol. It is estimated that a total of only 100 were ever
manufactured in their own serial number range of P1 to P100, making this a late example. While
Krieghoff was primarily a sporting arms maker, there was never an intention to bring large quantities
of Krieghoff Lugers to the commercial market; the ones Krieghoff delivered to the public were rejects
or overruns, with the absence of rejection stamps pointing towards this being one of the latter. These
pistols exhibit the Krieghoff blue finish with the straw colored small parts and fitted with checkered grips
with smooth borders. These models are easily identified since they are absent
of any Luftwaffe proofmarks. They use the very rare late production C-5 type
toggle markings and they have the “eagle/N” commercial proof on several areas of
the pistol. “Eagle/L2” proofs are present on the right side of the frame and receiver
and on a number of other parts. The full serial number is marked on the front of the
frame, and “63” is on the left side of the barrel extension. The blue magazine body is
unmarked, with a black plastic base.
CONDITION: Excellent, with 90% plus of the bright original blue finish, showing holster wear on the
edges and handling marks overall. The straw parts retain 80% of the bright original color, darkening on
the safety and bright on the edges. The grips are very fine, with some scuffs and dents, and some marks
are present on the screws.
Estimate: 6500 - 9500
SERIAL NUMBER P63
BOTH SIDES
PICTURED
BOTH SIDES PICTURED
LOT 461
Desirable World War I DWM Model 1914
Artillery Luger Semi-Automatic Pistol Rig
with Matching Shoulder Stock - Serial no. 3630g,
9 mm para cal., 7 3/4 inch round bbl., blue/straw finish,
walnut grips. Inverted “V” blade front and tangent
rear sights with fine adjustment notch, “1917” date on
the chamber and “DWM” monogram on the toggle link.
Three “crown/letter” proofs are present on the right side of
the barrel extension with “Imperial Eagle” firing proofs on
the extension, barrel and breechblock. Visible numbers are
matching with the exception of the magazine and grips. Overall blue
finish with straw colored small parts, nitre blue screws, pins and springs, and checkered
grips. Includes a correct flat board type shoulder stock numbered to match the gun on the
attaching iron with leather straps, “crown/S” stamp on the back, and brown leather artillery
pattern holster marked “MADE IN GERMANY” on the back side with bore rod.
CONDITION: Excellent with 90% plus original blue finish remaining, some areas of edge wear,
scattered light surface oxidation, 60% original straw finish on the small parts, and some small
scattered surface dings. The grips are very fine with the left grip panel having a small broken
area at the upper rear with the piece being pressure fit in place, otherwise the grips have mostly
sharp checkering and some small dings. Mechanically excellent. Stock is very fine with small dings and
scratches, mostly brown patina on the attaching iron, and age cracking on the leather. Holster is fine with
tight stitching, exterior scuffs and scrapes, some light staining, and overall solid construction.
Estimate: 4500 - 6500
345

The Robert Young Collection
346
LOT 462
World War I DWM Model 1914 Navy
Luger Semi-Automatic Pistol Dated 1917
- Serial no. 6913, 9 mm Luger cal., 6 inch
round bbl., blue finish, walnut grips. Issued
during WWI. Blade front and notch rear sights, adjustable
for 100 and 200 meter ranges. The chamber, left side of the
front sight base and the left side frame rail are all dated 1917.
The front toggle is marked with the “DWM” scroll. The left side
of the barrel extension has the “crown” proof followed by two
“crown/M” Navy proofs. The left rear of the barrel also has the single
Crown proof and the underside of the barrel has the small “crown/M”
proof over
the matching
serial number.
Visible
numbers on
pistol match.
The pistol has
a rust blue
finish with
straw colored small components and is fitted with checkered walnut grips. It has a
nickel plate magazine body with the Navy wooden bottom base numbered 7438
and marked with a small “crown/M” proof.
CONDITION: Extremely fine. The pistol retains 90% plus slightly faded original blue
finish with some muzzle wear and thinning on the barrel, some minor wear on the
left side of the barrel extension from normal usage, and some high edge wear. With
the exception of the thumb safety lever, the small parts retain most of the original
straw color, with smooth silver gray on the balance. The grips are fine with a chip
repair visible under the safety lever on top left, and pressure marks on the right
panel and overall crisp checkering. The markings remain clear. The magazine is a bit
ill-fitting and causes the hold open not to work properly all of the time, otherwise
the action is fine.
Estimate: 3250 - 4750
LOT 464
Walther Party Leader PPK Semi-Automatic Pistol - Serial no. 179636K, 7.65 mm auto
cal., 3 1/4 inch round bbl., blue finish, plastic grips. Known officially as the “Honor Weapon
of the Political Leaders,” PPK pistols with these special grips were presented to NSDAP
officials for meritorious party service. This example falls in the second range identified by Rankin.
Fixed sights, the Walther banner, two -line address and patents, and “Mod.PPK” on the left side of the
slide, pre-1940s commercial “crown/N” proofs on the slide, chamber and muzzle, and matching numbers
on the steel frame and inside the slide. The brown plastic, one piece, wrap around grips are checkered and
have the NSDAP eagle holding a wreath encircled swastika insignia cast on the top of the both sides, and the magazine is
fitted with a brown plastic grip extension.
CONDITION: Very fine with 85% bright original blue finish, visible areas of high point and edge wear, small surface
scratches, and handling marks overall. The Party Leader grips are also very fine with some slight warpage at the upper and
lower edges, hairline crack at the right rear, and chip absent the magazine base. Mechanically excellent.
Estimate: 3000 - 4500
LOT 465
DWM First Issue Altered Navy Model 1906 Luger
Semi-Automatic Pistol with Holster - Serial no.
2921a, 9 mm para cal., 6 inch round bbl., blue/straw finish,
walnut grips. Originally manufactured in “First Issue”
configuration, like many German Navy Luger pistols this
example was reconfigured, with the safety altered. The lower
safety position has been milled out, and a new “Gesichert”
added to the upper position. Blade front and two-position
notch rear sights, undated chamber, with a set of “crown” firing
proofs on the barrel, extension and breechblock, two “crown/M”
stamps on the left side of the receiver and one on the underside
of the barrel. The rear grip strap is marked “M.A./229” above
the stock lug. “GELADEN” is marked on the extractor, with straw
finished small parts, a pair of checkered grips, and a nickel finished
magazine with wood base. Includes black leather navy pattern
holster and period modified bore rod with handmade wood handle.
CONDITION: Fine with 60% of the faded arsenal blue finish
remaining, areas of high point and edge wear, visible surface
spotting throughout, tool marks on the grip screws, and 30% of the
straw colors on the small parts. The front sight blade is broken. The
grips are good with small bruises and dings overall, and moderately
worn checkering. The wooden magazine base is damaged with some
small chips on the right, and most of the protrusion absent on the left. Holster is good as altered with two large cuts made in the back (likely
makeshift belt loops), tight stitching, original loops absent, exterior scuffs,
and generally solid construction.
Estimate: 2500 - 3750
LOT 463
DWM 1915 Dated Artillery
Luger Semi-Automatic
Pistol with Stock, Drum
Magazine, and Accessories -
Serial no. 6982, 9 mm cal., 8 inch round bbl.,
blue finish, walnut grips. Fine-adjustable blade
front and tangent rear sights, with the “1915”
date on the chamber and “DWM” monogram on the
toggle link. Three “crown/letter” proofs are present on
the right side of the barrel extension with Imperial Eagle
firing proofs on the extension, barrel and breechblock.
Except the nickel finished wood base magazine, external numbers match with the proper “GESICHERT”
and “GELADEN” markings on the upper safety position and extractor respectively, and checkered grips with matching numbers on the interior. Included with the pistol is a hardwood
shoulder stock (sans holster and straps), a first model AEG drum magazine numbered “35492”, AEG magazine feed lip protector,
reproduction loading tool, and a wood handled cleaning rod.
CONDITION: Very fine, with 85% plus of the original blue finish, showing areas of brown patina, mild spotting, bright edge
wear and light handling marks. 60% of the straw colors remain, strongest in the protected areas with a mixed gray on the
remainder. The grips are also very fine with some dings and stains. The wood on the stock shows light pressure dents, with
some spotting and pitting on the iron, the magazine retains strong blue, and the reproduction loading tool has a replacement
arm. Mechanically excellent.
Estimate: 2750 - 4250

BOTH SIDES
PICTURED
LOT 466
Excellent Early Production Erfurt “1914” Date Artillery Luger
Semi-Automatic Pistol - Serial no. 7249a, 9 mm cal., 8 inch round
bbl., blue finish, hardwood grips. Blade front and tangent rear sights with
fine adjustment screws, “1914” date on the chamber and “crown/ERFURT”
on the toggle. “Crown/gothic letter” proofs are present on many parts, with
Imperial Eagle firing proofs on the barrel, extension and breech and Revision Commission
stamp on the trigger guard. Minus the magazine, external numbers are matching. Grips are
checkered, and the magazine is nickel with a hardwood base.
CONDITION: Excellent, with 95% of the original blue finish, showing areas of gray patina, bright
edge wear, mild spotting and light handling marks. 85% original straw colors are remaining on the
small parts. The grips are also excellent, with a few light dings. Mechanically excellent.
Estimate: 4500 - 7000
LOT 467
Mauser “1936” Date “S/42” Code
Luger Semi-Automatic Pistol with
Two Matching Magazines and Pig
Skin Holster - Serial no. 242m, 9 mm
para cal., 4 inch round bbl., blue/straw
finish, walnut grips. The third year of
Mauser Luger production during the
build-up to WWII, in 1936 the Germans
discarded the letter code system and went
back to just stamping the plain date on the
chamber. Blade front and notch rear sights,
“1936” on the chamber, “S/42” on the toggle
link, “droop-wing eagle/63” proofs on the
extension and barrel and “eagle” firing proofs
on the barrel, extension and breechblock.
Straw finished small parts, niter blue springs,
pins and screws, and checkered grips. The pistol
includes two matching, nickel finish magazines
with alloy bases marked “242/m/eagle/63” and
“242/m/+/eagle/63” respectively. Also included is
a black pebble grain pig skin leather holster.
CONDITION: Very fine, 70% plus original blue finish
remains with areas of high point and edge wear,
some small surface scratches, and thinning to a gray
patina on the grip straps. The grips are also very fine
with mildly worn, mostly crisp checkering, and some
small dings and bruises. Mechanically excellent.
Holster is fine with some exterior scuffs, tight
stitching, and overall solid construction.
Estimate: 2750 - 4250
LOT 468
Desirable 1936 Dated
Luftwaffe Krieghoff P.08
Luger Semi-Automatic
Pistol with Holster - Serial no.
5513, 9 mm cal., 4 inch round
bbl., blue finish, plastic grips.
This is a fine Luftwaffe contract
Krieghoff P.08 Luger that was
manufactured in 1936. It is
estimated that during 1936 only a
total of approximately 7,400 Luger
pistols were manufactured by
Krieghoff, inclusive of “S” and “1936”
marked pistols. The only official Luger
supplier of the Luftwaffe, Krieghoff’s
output showed a fit and finish more in
line with a fine commercial pistol than
a military weapon and rate among the
nicest contract Lugers manufactured.
Fixed sights, with a full “1936” date on
the chamber and the front toggle marked
with the 1936 “C-1” pattern Krieghoff
logo. Matching serial numbers
are present on the barrel, frame,
extension and some small parts,
with “Krieghoff Eagle/2” acceptance
proofs on the barrel, frame, and
receiver, and the “Eagle” firing proof
on the extension and breechblock.
The barrel also has the “884” internal
diameter mark on the underside. Fitted with straw colored small parts, niter blue screws and pins, a set of
brown checkered grips, and a blue finished alloy base magazine. A second magazine is included, as is a
black leather flap holster marked “P.08”, “GRAF/1940/LEIPZIG” and “WaA170” on the rear.
CONDITION: Very fine, with 75% of the original blue finish, showing bright wear on and around the edges,
areas of gray patina, mild spotting and light handling marks. 40% of the bright straw colors are present,
concentrated on the rear of the trigger, with mild spotting and a gray patina on the remainder. The grips
are also very fine, with mild dings, and the holster is good and shows some mild scuffs and extensive wear.
Mechanically excellent.
Estimate: 3000 - 4500
LOT 469
Scarce Mauser “K” Date
“S/42” Code P.08 Luger Semi-Automatic Pistol - Serial
no. 8452, 9 mm cal., 4 inch round bbl., blue finish, walnut
grips. Part of the early post-Weimar German re-armament
program, the “K” date Lugers were manufactured in 1934 in
violation of the Treaty of Versailles. Fixed sights, with the “K” date
on the chamber, “S/42” code on the front toggle link, “S][91” on the extension,
“B][90” stamps on the extension and barrel, and “droop wing eagle” firing proofs
on the barrel, extension, and breechblock. Some small parts are straw finished
with niter blue pins and screws, and a bright finished alloy base magazine marked
“9182/+/B][90”. Aside from the magazine, numbers are matching overall,
including the grips.
CONDITION: Fine, with 60% plus original blue finish, showing bright wear along the high
edges, along with some shallow pitting, a gray and brown patina forming on the receiver,
and mild spotting and handling
marks overall. 50% of the original
straw color is present with the
remainder a gray patina. The grips
are also fine with some dings and
dark spots. Mechanically excellent.
Estimate: 3000 - 4500
The Robert Young Collection
347

The Robert Young Collection
348
LOT 470
Mauser “byf/43” Code P.38 Semi-
Automatic Pistol with Very Scarce
“Eagle/L” Police Marking and Holster
- Serial no. 1182, 9 mm para cal., 4 3/4 inch
round bbl., blue finish, plastic grips. This 1943
production P.38 pistol includes a statement
noting that the pistol was brought back from
the European theater by Infantry Captain
Kenneth Tescher. Copies of Tescher’s “Enlisted
Man’s Identification Card” dated 1943 are also
included. Standard blade front and notch rear
sights, matching serial numbers on the frame,
slide, barrel lug, and partial matching number
“182” on the locking block, “eagle/135” and
“eagle/N” proofs and acceptance marks on the
barrel, frame, and slide, and the scarce “eagle/L”
police acceptance mark on the right side of the
slide. With serrated composite grips with lanyard
loop. Includes two “P.38v” marked magazines and
black leather soft shell holster marked “fkx/4” and
“P38” on the back.
CONDITION: Exceptionally fine with 85% plus original matte blue
finish remaining, some light muzzle and edge wear visible, and a
few small traces of light spotting. The grips are also excellent with
some light handling marks. Mechanically excellent. Holster is fair
with scuffs and scratches throughout, fading black color, some small pin holes in the closure flap, tight stitching,
and generally solid construction.
Estimate: 1600 - 2500
LOT 471
Collector’s Lot of Two Mauser Semi-
Automatic Pocket Pistols
-A) Mauser Model 1914 Semi-Automatic
Pistol with Box - Serial no. 516254, 32
auto cal., 3 1/4 inch round bbl., blue
finish, hard rubber grips. Manufactured
from 1929 to 1933. Fixed blade and notch
sights, one-line Oberndorf address on left
side of slide, caliber and patent marking
on the right, Mauser banner logo on left
side of frame, all matching visible serial
numbers. With checkered hard rubber
grips. Includes Mauser factory box without
model or serial number markings.
CONDITION: Excellent with 98% plus
original bright blue finish, traces of
light edge wear, and some small cycling
marks on the barrel. The grips are also excellent
with crisp checkering, and some small scratches.
Mechanically excellent. Box is good with corner
and edge wear, separated corners,
and some tape repairs.
B) Mauser Model 1910/34 Semi-Automatic
Pocket Pistol - Serial no. 427276, 6.35 mm auto cal., 3 inch round bbl.,
blue finish, hard rubber grips. Manufactured from 1934 to early 1940.
Standard fixed sights, one-line Oberndorf address on the left side of
the slide, and caliber and patent marking on the right. With matching
visible numbers and
Mauser banner checkered grips.
CONDITION: Excellent with 97% original bright blue finish, traces of light
edge wear, and handling marks. The grips are also excellent with crisp
checkering and some small surface scratches. Mechanically excellent.
Estimate: 1300 - 1900
LOT 472
Excellent World War II Walther
“ac/41” Code P.38 Semi-Automatic
Pistol with Matching Magazine -
Serial no. 9860b, 9 mm para cal., 4 3/4 inch round bbl., blue
finish, plastic grips. This Second Variation “ac/41” code Walther
P.38 pistol retains the original high gloss blue finish with the “ac”
production code correctly absent the left side of the trigger guard,
matching serial numbers on the barrel lug, frame, and slide, matching
partial “860b” serial number on the locking block. The slide, barrel and
frame are stamped with the correct “eagle/359” acceptance marks and dual “eagle” firing
proofs on the right side of the slide. With serrated bakelite grips with left side lanyard loop,
and correct original full blue magazine with matching serial number on the base.
CONDITION: Excellent. The pistol retains 97% original early production high gloss blue
finish with areas of mild edge wear visible, clear markings and proofs, and general handling
and storage type marks. The grips are also excellent with a few small dings and scratches.
Mechanically excellent.
Estimate: 2250 - 3500
LOT 473
World War II Police Marked J.P. Sauer &
Son Model 38H Semi-Automatic Pistol
with Holster - Serial no. 288152, 7.65 mm
auto cal., 3 3/8 inch round bbl., blue finish,
plastic grips. Fixed sights with the
Suhl address and caliber markings
on the left side of the slide, “PATENT”
on the reverse, “eagle/N” proofs
on the right side of the slide frame
and muzzle, and an “eagle/C” Police
Acceptance Stamp on the left trigger
guard web. A matching serial number
is present on the underside of the slide.
With a serrated safety and decocker and
checkered grips. The magazine catch
shows a very coarse checkering pattern,
in contrast to the more common “bullseye”
concentric circles. Includes a black
leather Schambach & Company holster
dated “1942” and stamped with a “police
eagle” proof on the body
and an extra magazine.
CONDITION: Excellent, with 90% plus of
the original blue finish, showing bright wear along the high edges and mild
handling marks. The grips are fine, with some mild dents. The holster is very
good, with some mild scuffing. Mechanically excellent.
Estimate: 1400 - 2250
LOT 474
German Military Proofed Mauser HSc
Semi-Automatic Pistol - Serial no. 721235,
7.65 mm auto cal., 3 1/4 inch round bbl., blue
finish, walnut grips. Fixed sights, with the standard
markings on the left side of the slide, “eagle/N” and “eagle/
655” German proofs on both sides of the trigger guard. The
underside of the slide and barrel are numbered to match the frame.
With standard checkered walnut grips.
CONDITION: Excellent with 90% plus bright original blue finish remaining, visible edge
wear on the slide, scattered light handling marks, and some small surface nicks. The
grips are very fine with well defined checkering, and some small dings.
Mechanically excellent.
Estimate: 900 - 1400

LOT 475
Sauer “ce/44” Code Model 98 Bolt Action Rifle with a ZF 4 Scope with a “Swept Back” Style Mount - Serial no. 9700d, 8 mm cal., 24 inch round
bbl., blue finish, laminated stock. This is an example of a late-war production
K98 rifle made by J. P. Sauer and Sohn with one of the copies of a late war
variant swept-back style sniper mount. These swept-back mounts were
produced at the very end of WWII and saw very limited use before the war ended. The
standard style of swept-back mount has been noted on both Mauser and J.P. Sauer K98 rifles. These late war mounts were intended to be an easy to
produce, rigid and robust scope mount and base system that could be easily mounted on the standard K98 rifle, without special sized receivers or complicated
soldering and mounting techniques, that utilized the new ZF4 style of scope that was also a war expedient version of the traditional German sniper scopes. The left side of the scope is
marked “Gw ZF 4 dow (triangle)” over “25620”. The rifle has hooded blade front and tangent rear sights, with “ce/44” on top of the receiver ring, “Mod.98.” in ‘fraktur’ style lettering on the side wall, and a sniper-style
bolt with a turned handle and a ‘ring’ style safety. The scope rail is attached to the left side of the magazine, with an appropriate cutout in the stock. Components are a mix of stamped and machined, with a laminated
stock and a cupped buttplate.
CONDITION: Very good as refinished and upgraded to current configuration, with 90% of the blue, showing a slight plum tint to the receiver, covered dings and pits, and mild wear overall. The optics are a bit hazy, with mild
spotting on the exterior, and the mount shows a dark gray patina on the machined surfaces and a traditional rough cast appearance elsewhere. Mechanically excellent.
Estimate: 2750 - 4250
LOT 476
Scarce Late World War II Steyr “bnz45” Code VG-98 Volksgewehr Bolt Action Rifle - Serial no. 6196, 8 mm cal., 21 inch
round bbl., blue finish, hardwood stock. Manufactured at the very tail end of the WWII, the VG-98 was part of the “Volkswaffen”
(People’s Weapon) series of armaments, intended to gear up German 2nd line defensive formations without diverting higher quality armaments still needed
by the main formations of the Wehrmacht and Waffen-SS. Most of the units destined to receive these weapons were “Volksturm” (People’s Storm or People’s Assault), which
consisted mostly of men too old and boys too young to be properly drafted. When the war came to an end, few VG98s were picked up by Allied trophy hunters since they weren’t as “pretty”
as the more common 98k or mechanically novel like some other Volks weapons, resulting in very few being available on the contemporary American market. The heart of the VG98 is a Model 98
receiver, with crude fixed sights, a roughly finished barrel, and a one-piece stock. Tack welded blade front and dovetailed notch rear sights, a numbered barrel and a rough machined matching numbered
bolt without a guide rib. The stock fully encloses the magazine, with a “U” bend steel trigger guard, wire sling swivel and a naked butt.
CONDITION: Very good, with 70% of the thinning blue finish on the receiver, showing a refinished mixed artificial brown patina on the barrel, a small amount of pitting, and scattered spotting and handling
marks. The stock is very good, with mild scrapes and dings. Mechanically very good.
Estimate: 2500 - 3750
LOT 477
World War II Mauser “42” Code, 1940 Date 98k
Bolt Action Rifle with Bayonet - Serial no. 9963pp, 8 mm cal., 24 inch round bbl., blue finish,
laminated stock. Blade front and tangent rear sights, with the “42/1940” manufacturer code and
date markings on the receiver ring, and a series of “eagle/655” inspection
marks on a number of components. Matching serial numbers are present on
many parts, including the barrel bands, rear sight components, bolt components, floorplate, trigger
guard, stock and buttplate. In addition to the matching number, the stock bears a set of faint Waffenamt stamps on the right side, with the takedown ring stamped “WaA623”
and “O.32177”; “O” is often short for “Ost” (East) on German equipment, such as naval hardware intended for use on the Baltic Sea (“Ostsee” in German). Included with the rifle is a
“Horster” maker marked bayonet with a blued steel sheath and a black leather frog.
CONDITION: Fine, with 75% of the original blue finish on the barreled action, showing areas of brown patina, mild edge wear and light handling marks. The trigger guard assembly
retains 98% professionally restored blue finish. The lightly sanded stock is very good, with some scuffing and chipping along the edges, and shallow pitting and a few dents on the
buttplate. Mechanically excellent.
Estimate: 1800 - 2750
LOT 478
World War II Gustloff-Werke “bcd/4” Code 98k Bolt Action Rifle - Serial
no. 2611x, 8 mm cal., 24 inch round bbl., blue finish, laminated stock. Hooded blade front and tangent rear sights,
with “bcd/4” on top of the receiver ring, “Mod .98” on the left sidewall, and “eagle/swastika” proofs on several parts. Matching numbers are present on the bolt,
rear sight, and barrel bands. Smooth, laminated stock, with a cupped buttplate and a brown leather sling.
CONDITION: Fine, with 70% of the original blue finish, showing areas of brown patina, mild spotting, and scattered handling marks. The stock is fine, with chipping around the barrel
bands (heavy underneath forward band), cracking/opening of the grain at the buttplate, and scattered stains and scuffs. Mechanically excellent.
Estimate: 1400 - 2250
LOT 479
Desirable SS Issued Steyr “bnz/43” Code Model 98 Bolt Action Rifle -
Serial no. 8187l, 8 mm cal., 24 inch round bbl., blue finish, laminated stock. Manufactured by Steyr-Daimler for the SS
during World War II. The top of the receiver ring is marked “bnz”, the wartime code for Steyr, over a single “sig/lightning” rune and “43” with
“Mod. 98” marked on the left receiver wall. Blade front and tangent rear sights, with a smooth laminated stock, brown leather sling and a cupped steel buttplate.
“H.H.M.” has been engraved into the right side of the rear sight base.
CONDITION: Very good, with 25% of the original blue finish, showing areas of brown and gray patina, spotting and handling marks. The bolt, middle and front barrel band have
been renumbered to match the receiver. The stock is good, with splitting and chipping around the edges of the outermost wood layers, cracks in the top of the wrist and left side
of the buttplate, and scattered dents and scuffs. Mechanically excellent.
Estimate: 1400 - 2250
349

LOT 480
World War II Berlin-Lubecker “duv 44” Code
G43 Semi-Automatic Rifle with ZF4 Sniper
Scope - Serial no. 4444e, 8 mm cal., 24 inch
round bbl., blue finish, laminated stock. Hooded blade front
and tangent rear sights, with the standard markings on the left side of the receiver. Both the receiver and bolt
carrier are forged and machined, with the manual catch on the right side of the carrier, and matching numbers on the frame and bolt carrier. Fitted with a smooth
unnumbered stock with a cupped trapdoor buttplate. The scope is marked “Gw ZF4/61637/ddx” on the side, with an “eagle/359” marked scope mount.
CONDITION: Fine, with 80% of the blue finish, showing areas of brown patina, mild spotting, edge wear and handling marks. The saned, refinished stock is very good, with
some dings, scuffs and dark spots. The scope is very good, with some mild external wear and spotting and good optics. Mechanically excellent.
Estimate: 2250 - 3500
LOT 481
World War II Steyr “bnz/41” Code Model 98
Bolt Action Rifle with Kriegsmarine Stock Markings and Bayonet - Serial no. 4653d, 8
mm cal., 24 inch round bbl., blue finish, laminated stock. Hooded blade front and tangent
rear sights, with “bnz/41” on the receiver ring, “WaA823” and “eagle/77”
stamps, and matching numbers on the receiver, barrel, barrel bands,
rear sight components, bolt components, floorplate, triggerguard, the stock and the buttplate.
Additionally, the stock bears the “eagle/M” marking for Kriegsmarine-issue rifles, and is fitted with a brown leather sling. Included with the rifle is a “cui” code blued steel bayonet
with a matching numbered sheath and a black leather frog.
CONDITION: Very fine, with 80% of the original blue finish, showing scattered light spotting, areas of brown patina and mild handling marks. The lightly sanded stock is fine, with a
number of scuffs and dents overall, along with chipping at the buttplate. The bayonet is excellent overall, with mild wear. Mechanically excellent.
Estimate: 2250 - 3250
LOT 482
Scarce German Occupation Production Norwegian
Model 1894 Krag Rifle with Bayonet - Serial no. 464, 6.5x55 mm cal., 30 inch round bbl., blue/phosphate
finish, hardwood stock. Manufactured in 1944 during the German occupation of Norway. Adjustable blade front
and tangent rear sight, with the receiver ring marked “Nb 1944-464” followed by a set of eagle stamps. Smooth pistol
grip stock with a matching number on the left side, canvas sling and a flat steel buttplate. Includes the correct pattern bayonet, faintly “eagle”
proofed on the guard, and a sheath.
CONDITION: Fine, with 50% of the original blue/phosphate finish, showing a gray patina on the magazine and barrel bands, brown on the bolt and triggerguard, and mild wear and handling
overall. Some components are mixed, or possibly renumbered to match. The stock is fair, with dark stains around some of the metal, scattered dings and scratches. The bayonet shows some light
pitting. Mechanically excellent.
Estimate: 2000 - 3000
LOT 483
Brunn/BRNO “dot/1942” Code Model G33/40 Bolt Action Mountain Carbine -
Serial no. 919a, 8 mm cal., 20 inch round bbl., blue finish, laminated stock. Manufactured in 1942 during the German Occupation of Czechoslovakia for issue to
the German Gebirgsjaeger mountain troopers. Hooded blade front and tangent rear sights, with “WaA63” and “eagle/swastika” stamps on the “dot/1942” marked receiver and a
matching-numbered bolt handle. The laminated stock is numbered to match the gun, and fitted with a brown leather sling and the correct extended cupped buttplate.
CONDITION: Fine, with 60% of the original blue finish, showing areas of gray patina, bright edge wear, light spotting and mild handling marks. The lightly sanded stock is very good, showing a
coating of varnish overall, with minor dents and scratches. Mechanically excellent.
Estimate: 1800 - 2750
LOT 484
World War II Mauser “byf/44” Code Model 98 Bolt Action Rifle - Serial no. 7789f, 8 mm cal., 24 inch round bbl., blue finish, laminated
stock. Hooded blade front and tangent rear sights, with “E 13” stamped on the rear of the barrel, “byf/44” on the receiver ring and “Mod. 98” on the left receiver
wall. Smooth pistol grip stock, with a brown leather sling and a cupped buttplate.
CONDITION: Very fine, with 85% plus original blue finish, showing mild handling marks and a small amount of spotting overall, as well as a plum or copper patina on some components. The
lightly sanded stock has been “duffle cut” and reglued under the mid band, otherwise showing mild wear and handling marks. Mechanically excellent.
Estimate: 1800 - 2500
LOT 485
J.P. Sauer 1939 Production “147” Code, 98K Bolt Action Rifle - Serial no. 4251t, 8 mm cal., 24
inch round bbl., blue finish, laminated stock. Blade front and tangent rear sights, with a set of three “eagle/359” proofs on the right side of the rear sight
base, “147/1939” on top of the receiver ring, and “eagle/359” and “eagle/37” proofs on the right side. Matching numbers are present on multiple components,
including the bolt, rear sight, barrel rings, floorplate and triggerguard. The replacement stock is numbered “3291”, with an “eagle/L” Luftwaffe stamp and a flat buttplate.
CONDITION: Fine, with 70% of the original blue finish, showing areas of brown and gray patina, scattered dents and scratches, and mild handling marks. The replacement stock is very good,
with dents and scuffs. Mechanically excellent.
Estimate: 1600 - 2500
350

LOT 486
World War II Walther PPK 22 LR Semi-Automatic
Pistol with Holster - Serial no. 315714k, 22 LR cal.,
3 1/4 inch round bbl., blue finish, plastic grips. This
pistol has fixed sights with the Walther banner,
address, caliber and model markings on the left side
of the slide, post 1940 “eagle/N” proofs on the slide,
muzzle and chamber hood, matching serial numbers
on the right side of the slide and frame, and an
additional matching partial serial number properly
hand-scribed inside the slide. It is fitted with a ring
hammer, 60 degree safety, wraparound checkered
plastic grips, and a flat base magazine. A brown
leather Albrecht Kind holster with “Walther/P.P.K.”
ink stamp inside the flap is included, with the
name “Edward/Dorrey” marked on the belt loop;
Dorrey has not been identified.
CONDITION: Excellent, with 95% plus of the original blue finish, showing bright wear along the edges, a slight
plum tint to the slide with brighter spots on the corners and under the safety, and mild handling marks. The grips
are very fine, with some bending at the corners and mild wear. The holster is very good, with some scuffing and
staining. Mechanically excellent.
Estimate: 2000 - 3000
LOT 487
Excellent Walther PP Semi-Automatic Pistol
with Very Scarce Ersatz-Style Holster - Serial
no. 330756p, 7.65 mm auto cal., 3 3/4 inch round
bbl., blue finish, composite grips. Standard fixed
blade and notch sights, “WALTHER” banner, two-line
address, caliber, and model marking on left side of
slide, matching serial numbers on right side of frame
and slide, standard “eagle/N” proofs, loaded chamber
indicator, 60 degree decocking safety, and checkered
Walther banner grips. Includes unmarked ersatz style
pressed paper holster with leather closure loop and
extra magazine.
CONDITION: Excellent with 98% original matte blue
finish, some small scattered nicks, handling marks,
and light cycling marks. The grips are also excellent
with sharp checkering. Mechanically excellent. Holster
is very fine with some small separations of the layers and handling marks.
Estimate: 1800 - 2750
LOT 488
Collector’s Lot of Two Mauser
Semi-Automatic Pistols
-A) Mauser Model 1914 Semi-Automatic Pistol - Serial
no. 276862, 7.65 mm auto cal., 3 1/4 inch round bbl.,
blue finish, walnut grips. Fixed blade and notch sights, one-line Oberndorf
address/Mauser’s Patent marking on left side of slide, caliber marking on the
right, all matching visible serial numbers. With wraparound walnut grip.
CONDITION: Excellent with 97% plus original blue finish, some light edge wear, and a
few small surface scratches. The grip
is also excellent with some light
handling marks and some small dings.
Mechanically excellent.
B) Mauser Model 1910 Semi-
Automatic Pocket Pistol - Serial no.
406987, 6.35 mm auto cal., 3 inch round bbl., blue finish,
hard rubber grips. Manufactured from 1936 to early 1940.
Standard fixed sights, one-line Oberndorf address on the
left side of the slide, and caliber and patent marking on the right. With
checkered wraparound, Mauser banner grips.
CONDITION: Excellent with 95% plus original blue finish and some light
surface scratches. The grip is also excellent with crisp checkering and some
small dings. Mechanically excellent.
Estimate: 1000 - 1600
LOT 489
Collector’s Lot of Two World War II German
Military Proofed Walther
Semi-Automatic Pistols
-A) Walther PP Semi-Automatic Pistol - Serial no. 323760P,
7.65 mm auto cal., 3 3/4 inch round bbl., blue finish, composite grips.
Fixed sights, with “eagle/N” proofs on the chamber, muzzle and slide,
“WaA359” Heer stamps on the left side of the slide and frame, and the
Walther banner, 2-line address and caliber markings and “Mod. PP” on the left side of the
slide. Matching numbers are present on the right side of the slide and frame. Fitted with a
60 degree safety, loaded chamber indicator and one flat base magazine.
CONDITION: Very fine with 85% original matte blue finish remaining, having turned to an
overall plum patina mostly on the grip straps, some light edge wear, and handling marks.
The grips are excellent with crisp checkering.
Mechanically excellent.
B) Walther PPK Semi-Automatic Pistol with Matching
Magazine - Serial no. 425619K, 7.65 mm auto cal., 3 1/4
inch round bbl., blue finish, plastic grips. Standard twoline
Walther markings on the left side of the slide next to the
banner, with “eagle/N” commercial proofs on right side of slide, chamber
and barrel, “eagle/WaA359” military acceptance proofs on the left side of
the slide and frame, and matching serial numbers on the exterior of the
slide and frame. The pistol is fitted with fixed sights, 60 degree safety, a checkered wraparound
Walther banner grip and a matching numbered, “2” suffix, flat base magazine.
CONDITION: Very fine with 75% original blue finish, areas of mild edge wear, overall plum
hue on the frame, some small scratches, and gray patina on front grip strap. The grips are
fine with small dings, well defined checkering, slight warpage at the tops, and a small
crack at the top of the back strap. Mechanically excellent.
Estimate: 1600 - 2500
LOT 490
Collector’s Lot of Two Boxed Mauser Semi-
Automatic Pistols
-A) Mauser Model 1914 Semi-Automatic Pistol -
Serial no. 313394, 7.65 mm auto cal., 3 1/4 inch round
bbl., blue finish, walnut stock. Manufactured between
1923 and 1929. Fixed blade and notch sights, two-line
Oberndorf address/Mauser’s Patent marking on left side
of slide, caliber marking on the right, Mauser banner
logo on left side of frame, all matching visible serial
numbers. With wraparound walnut grip. Includes correct
model factory box without serial number
marking with manual.
CONDITION: Excellent with 97% original blue finish,
some scattered light handling marks, and some small
dings on the cocking serrations. The grip is also excellent
with well defined checkering and some small dings.
Mechanically excellent. Box is fair with corner and edge
wear, partially separated section of the lid,
and exterior peeling.
B) Mauser Model 1910 Semi-Automatic Pocket
Pistol - Serial no. 266531, 6.35 mm auto cal., 3 inch
round bbl., blue finish, walnut grips. Manufactured
between 1921 and 1928. Fixed blade front sight
on band and fixed notch rear sights, with matching
external numbers, “crown/U” proofs, “MADE IN
GERMANY” on the right side of the frame and the
Mauser banner on the left. Fitted with niter blue small
parts and a one-piece checkered wraparound grip.
Included with the pistol is an unnumbered, correct
model factory box with manual.
CONDITION: Excellent with 95% original blue finish, bright nitre blue small parts, some light edge wear, and some
light gray speckling on the front grip strap. The grip is fine with moderately worn, but well defined checkering,
and some small dings. Mechanically excellent. Box is about fair with heavy corner and edge wear,
and exterior peeling.
Estimate: 1100 - 1600
The Robert Young Collection
351

The Robert Young Collection
352
LOT 491
Excellent World War I DWM
Model 1914 Navy Luger
Semi-Automatic Pistol - Serial
no. 1031a, 9 mm cal., 6 inch round bbl., blue finish, walnut grips.
Dated “1917” on the front sight base, left receiver rail, and on top
of the chamber, with the “DWM” monogram on the front toggle link,
“crown” firing proofs on the barrel, extension and breechblock; and the
“crown/M” Navy proof twice on the extension and once on the barrel. “GESICHERT” and
“GELADEN” marked upper safety area and extractor, with straw finished small parts, niter
blue pins and springs, checkered grips, and a nickel-finished magazine with hardwood
base, which is “crown/M” marked. Minus the mixed magazine and unnumbered extractor,
external numbers are matching.
CONDITION: Excellent, with 95% plus of the original blue finish, showing bright edge wear,
mild spotting, and scattered handling marks. The original straw colors remain 85% intact and have taken
on a slightly dark tone, with some light spotting, and the
screws have turned brown and show mild tool marks.
The grips are also excellent with some minor dings.
Mechanically excellent.
Estimate: 3000 - 4500
LOT 492
Mauser 1936 Dated “S/42” Code Luger
Semi-Automatic Pistol with Holster - Serial
no. 3239r, 9 mm para cal., 4 inch round bbl.,
blue finish, walnut grips. The third year of Mauser Luger
production during the build-up to WWII, in 1936 the
Germans discarded the letter code system and went
back to just stamping the plain date on the chamber.
Blade front and notch rear sights, “1936” on the chamber,
“S/42” on the toggle link, “droop-wing eagle/63” proofs on
the extension and barrel and “eagle” firing proofs on the
barrel, extension and breechblock. Straw finished small
parts, niter blue springs, pins and screws, checkered grips,
and a blue-finished magazine with matching numbered
alloy base. External numbers are matching. The grips
are marked “SS” on the backs. Includes “1940” dated Graf
leather holster with “eagle/WaA170” acceptance mark on
the back, extra non-matching numbered magazine, and
“eagle/655” proofed takedown tool.
CONDITION: Very fine as professionally restored with
most of the partially refinished blue (mixed with original blue) and bright re-strawed small parts, some
light edge wear, and light barrel proofs. The grips are also very fine with sharp checkering, and some
darkening at the top of the left panel. Mechanically excellent. Holster is very good is scuffs and surface
scratches overall, age cracking on the loops and straps, tight stitching, and overall solid construction.
Estimate: 1600 - 2500
LOT 493
DWM Model 1906 American Eagle Luger
Semi-Automatic Pistol - Serial no. 55027, 7.65 mm Luger Auto cal.,
4 3/4 inch round bbl., blue/straw finish, walnut grips. Manufactured by
DWM for commercial sale in the United States. These early commercial
Lugers exhibit the best fit and finish with beautiful hand polished rust blue finish on
the metal parts with straw colors on the smaller components. This model is fitted with
the standard 4 3/4 inch tapered barrel, with no stock lug. The chamber area is marked with
the “American Eagle” crest, along with the “LOADED” marked extractor and polished lower
safety area. The pistol has the commercial style serial number placement, with the frame
marked “GERMANY” below the serial number. The pistol is complete with a correct commercial
magazine that has a nickel plated body with a unmarked wooden base.
CONDITION: Very fine with 80% original blue finish, areas of moderate edge and high point wear, some
surface scratches, and a slightly darker patina on the
safety lever. 70% original straw colors remain.The grips
are also fine with some smoothing around the lower
edges, some small dings, and overall well defined
checkering. Mechanically excellent.
Estimate: 1600 - 2500
LOT 494
World War I DWM Artillery Model
1914 Luger Semi-Automatic
Pistol - Serial no. 588b, 9 mm para cal., 8 inch round bbl., blue/straw finish,
walnut grips. Fine adjustable blade front and tangent rear sights, “1917” date on
the chamber and “DWM” monogram on the toggle link. Three “crown/letter” proofs
are present on the right side of the barrel extension with “Imperial Eagle” firing proofs
on the extension, barrel and breechblock. Visible numbers are matching with the exception of the
magazine and grips. Overall blue finish with straw colored small parts, nitre blue screws, pins and
springs. And checkered grips. With nickel plated, wood base magazine.
CONDITION: Excellent with 95% original blue finish,
some mild edge and muzzle wear, small handling marks,
and traces of some light scattered spotting. 75% original
straw colors remain. The grips are very fine with mostly
crisp checkering and some small dings.
Mechanically excellent.
Estimate: 1800 - 2750
LOT 495
Mauser “S/42” Code “1937” Dated Luger Semi-
Automatic Pistol with 1937 Dated Holster - Serial no.
364r, 9 mm para cal., 4 inch round bbl., blue/straw finish, walnut
grips. Inverted “V” blade front and fixed notch rear sights, “1937”
dated chamber, matching serial numbers on the front of the
frame, underside of barrel, and left side of barrel extension, double
“eagle/63” acceptance marks and “stick eagle” firing proofs on right
side of barrel extension, and matching “64” partial serial number on
the small parts. Overall blue finish with straw colored small parts,
checkered grips with matching “64” partial serial number on the backs
and non-matching numbered aluminum base magazine. Includes
“1937” dated black leather holster and extra Simson “Eagle/6”
proofed magazine.
CONDITION: Fine with 75% faded original blue finish, areas of high
point and edge wear, dark patina around the muzzle, and some small
scratches. 70% original straw colors remain. The grips are also fine
with crisp checkering and some small dings. Mechanically excellent.
Holster is fine with repaired/replaced belt loop, and small scuffs and scratches overall.
Estimate: 1600 - 2500
LOT 496
Mauser “S/42” Code
“1938” Dated P08 Luger Semi-Automatic
Pistol with Cased Military Proofed Erma
.22LR Conversion Kit - Serial no. 2086i, 9 mm
para cal., 4 inch round bbl., blue finish, walnut grips. Inverted
“V” blade front and fixed notch rear sights, “1938” dated
chamber, matching serial numbers on the front of the frame
left side of barrel extension, and underside of barrel, matching
“86” partial serial numbers on the small parts, double “eagle/63”
acceptance marks and “stick eagle” firing proof on right side of barrel
extension, and overall blue finish including the small parts. The grips
are checkered with matching
“86” partial serial number on
the backs. With blue finished magazine with matching numbered
aluminum base. Includes a cased .22 LR conversion kit with the toggle
assembly numbered “1047b” with “eagle/77” acceptance marks “1004”
numbered barrel sleeve and magazine, and fitted wood case marked
“ERMA” on the front with an “eagle/77” acceptance stamp.
CONDITION: Fine with 70% original blue finish, areas of high point and edge wear, spotting visible on the barrel, small
scattered scratches, and refinished center toggle (matte finish instead of polished like the balance of the pistol). The
grips are also fine with mostly crisp checkering, and small dings. Mechanically excellent. Conversion kit is fine overall
with handling marks, spotting on the barrel sleeve, and small dings and bruises on the otherwise very fine wood case.
Estimate: 1600 - 2500

LOT 497
DWM/Mauser American Eagle Luger Semi-Automatic Pistol with “A.F. Stoeger”
Retailer Marking - Serial no. 617v, 7.65 mm Luger Auto cal., 5 7/8 inch round bbl., blue/
straw finish, walnut grips. This is a fine
example of DWM Model 1923 “American
Eagle” Commercial Luger with the very
desirable A.F. Stoeger retailer markings.
These 1923 American Eagle Lugers were made expressly for export to the United
States. A.F. Stoeger Company in New York, was one of the largest firearms importers
in the U.S. during the 1920s and 1930s. The chamber is marked with the American
Eagle crest, and the front toggle has the “DWM” monogram for Deutsche Waffen und
Munitionsfabriken, which later became Mauser. It is chambered for the 7.65 mm Luger cartridge with
the rapid taper 6 inch Navy-length barrel. The right side of the barrel extension is rolled marked with a
small “GERMANY” followed by “A.F. STOEGER, INC./NEW YORK.” with the right side of the frame roll marked
“GENUINE LUGER - REGISTERED U.S. PATENT OFFICE”. It is marked “LOADED” and “SAFE” respectively on
the extractor and under the safety lever. The front of the frame
is stamped with the serial number, with the barrel lug marked
“614”. The takedown lever, side cover, and trigger are marked
“17” in the commercial style. A beaded blade front sight is
installed in the muzzle dovetail, with straw finished small parts,
checkered grips, and a correct magazine with “GERMANY”
marked hardwood base.
CONDITION: Fine as assembled showing 70% original blue
on the frame and barrel assemblies, some areas of light edge
wear, mostly gray patina on the grip straps, the rear toggle has
a visible plum tint, and 60% original straw finish on the small
parts. The grips are excellent with crisp checkering and just a
few small dings. Mechanically excellent.
Estimate: 3750 - 5500
LOT 498
Krieghoff “S” Code Luftwaffe Contract Luger Semi-Automatic Pistol - Serial
no. 3506, 9 mm cal., 4 inch round bbl., blue finish, plastic grips. Manufactured
approximately 1936, shortly before the Germans abandoned the “code letter” system
of weapons dating, as one of the Lugers produced by Krieghoff for the Luftwaffe. Fixed
sights, “S” on the chamber and the “C-2” pattern die stamped “H(anchor)K/KRIEGHOFF/
SUHL” marking on the front toggle link. A series of “eagle/L/2”, “droop wing eagle” and “eagle/2” proofs
are present on a number of components, with an unnumbered barrel. Fitted with straw and niter blue
finished small parts, a pair of correct smooth bordered checkered grips, and a blued magazine with an
alloy base marked “7350/r/+/eagle/63”.
CONDITION: Very fine as professionally refinished, with
90% of the high polish blue, showing bright edge wear,
scattered handling marks and some light spotting. 50%
of the bright straw color is present, strongest on the
sides of the trigger, and bright niter blue is present on
the sear spring. The grips are very fine, with some light
dings and scuffs. Mechanically excellent.
Estimate: 2500 - 4000
LOT 499
DWM Model 1914 Navy Luger Semi-
Automatic Pistol Dated 1916 - Serial no. 1805, 9 mm para cal., 6 inch round
bbl., blue/straw finish, walnut grips. Blade front and two-position (100 and 200)
notch rear sights, with “1916” on the front sight base, left frame rail and on top of the
chamber, and “DWM” on the front toggle link. A pair of “crown/M” proofs are present on
the extension and repeated on the barrel, with “Imperial crown” firing proofs on the barrel,
extension, and breechblock. The pistol is marked “GELADEN” and “GESCHERT” on the extractor and
upper safety position, with straw colored small parts and niter blue on the screws, pins, and springs.
Fitted with checkered grips and a nickel-finished magazine with unnumbered wood base
CONDITION: Fine with 80% partially refinished blue
mostly visible on the grip straps, evidence of patches
of light pitting under the blue on the barrel, areas
of edge wear, and thinning to a gray patina on the
grip straps. The grips are also fine with some light
smoothing on the lower edge, crisp checkering, and
some small dings. Mechanically excellent.
Estimate: 1400 - 2250
LOT 500
DWM Model 1920 Commercial Luger Semi-Automatic
Pistol with “A.F. Stoeger” Style Marking - Serial no.
7435u, 7.65 mm Luger Auto cal., 11 3/4 inch round bbl., blue
finish, walnut grips. Manufactured expressly for the American
commercial market, this pistol bears the “American Eagle”
chamber marking, an extra-long carbine style
barrel with “GERMANY” stamp, and the spurious
marking, “A.F. STOEGER INC/NEW YORK.” on
the right side of the receiver. During the 1920s
and 1930s, Stoeger was one of the top firearms
importers in the United States, and offered the
Luger to public in both standard configurations
and a number of special
variations, including longer than
standard barrels. This particular
pistol has a ramp-mounted
peppercorn front sight and a
standard notch rear sight, with the
“DWM” logo on the front toggle
link, “crown/N” on the receiver and
breechblock, “GESICHERT” and “LOADED” safety and extractor markings, straw finished small parts
and a nickel finished magazine with unmarked wood base.
CONDITION: Fine as custom upgraded to current configuration, with 80% of the restored blue finish.
Some patches of deep pitting are present on the right side of the barrel, with some bright wear on
the high edges, small areas of brown and gray patina, and minor spotting and handling marks. 70%
of the refurbished straw colors are present, with some fading and spotting on the remainder. The
grips are very fine, with some light dings
and dark spots. Mechanically excellent.
Estimate: 1400 - 2250
LOT 501
DWM Military Model 1914
Luger Semi-Automatic Pistol
with Holster - Serial no. 5340f, 7.65
mm Luger Auto cal., 4 inch round
bbl., blue/straw finish, walnut grips.
Inverted “V” blade front and fixed
notch rear sights, chamber dated
“1916”, World War I era proofs and
acceptance marks on the right side of
the barrel extension, “GERMANY” on the
left frame rail, matching serial numbers
on the front of the frame and left side
of barrel extension, and military style
matching partial “40” serial number
on the small parts. The barrel has
been sleeved down to 7.65 mm Luger
Automatic. With an overall blue finish,
straw colored small parts, checkered
grips, and nickel plated magazine with
matching numbered wood base. With
brown leather holster marked “N. Burghard/Pasing/AWM/2” on the back,
and unmarked takedown tool.
CONDITION: Fine as professionally resleeved/rechambered for 7.65 mm ammunition with 80%
original blue finish, areas of high point and edge wear, some small scratches and dings, and
re-strawed small parts. The grips are also fine with some smoothing along the lower edges, crisp
checkering on the balance, and some small dings. The magazine base is chipped on the left side.
Mechanically excellent. Holster is good with scuffs and small scratches overall, tight stitching,
cracking on the closure strap, and some mild oil staining.
Estimate: 1100 - 1600
The Robert Young Collection
353

The Robert Young Collection
354
LOT 502
Collector’s Lot of Two Boxed Walther PPK
Semi-Automatic Pistols -A) Walther PPK Semi-
Automatic Pistol - Serial no. 122201A, 9 mm Kurz
(380 Auto) cal., 3 1/4 inch round bbl., blue finish,
plastic grips. Standard fixed blade and notch sights,
Walther banner and two-line address on the left side
of the slide, standard proofs and “67” proof date on
the barrel chamber, 60 degree safety/decocker, and
smooth trigger. Includes original “snake skin” box test
target, extra flat base magazine, bore rod, and tool.
CONDITION: Near new in box with 99% plus original
blue finish, scattered light handling marks, and crisp
checkering on the grips. Mechanically excellent. Box is
very fine with some corner and edge wear.
B) Walther PPK Semi-Automatic Pistol - Serial no.
121302A, 9 mm Kurz (380 Auto) cal., 3 1/4 inch round
bbl., blue finish, plastic grips. Standard fixed blade and
notch sights, Walther banner and two-line address
on the left side of the slide, standard proofs and “67”
proof date on the barrel chamber, 60 degree safety/
decocker, and smooth trigger. Includes original “snake
skin” box test target, extra flat base magazine, bore
rod, and tool.
CONDITION: Near new in box with 99% plus original
blue finish, scattered light handling marks and crisp
checkering. Mechanically excellent. Box is fine with
some corner and edge wear.
Estimate: 1800 - 2750
LOT 503
Collector’s Lot of Two Boxed Walther Semi-
Automatic Pistols -A) Walther PP .22LR Semi-
Automatic Pistol - Serial no. 24110LR, 22 LR cal., 3
3/4 inch round bbl., blue finish, plastic grips. Fixed
blade front and notch rear sights, standard markings
on the slide, “65” proof date on the barrel chamber,
60 degree decocking safety, and checkered grips.
Includes original “snakeskin” box and extra magazine.
CONDITION: Excellent with 98% original blue
finish, faint trace of edge wear on the slide, light
handling marks, and sharp checkering on the grips.
Mechanically excellent. Box is very good with corner
and edge wear, peeling and some discoloration.
B) Walther PPK Semi-Automatic Pistol - Serial
no. 225389, 7.65 mm auto cal., 3 1/4 inch round bbl.,
blue finish, plastic grips. Standard fixed blade and
notch sights, Walther banner and two-line address
on the left side of the slide, standard proofs and “68”
proof date on the barrel chamber, 60 degree safety/
decocker, and smooth trigger. Includes original “snake
skin” box, test target, extra flat base magazine,
and manual.
CONDITION: Near new in box. Box is very fine.
Estimate: 1400 - 2250
LOT 504
Collector’s Lot of Two Walther Semi-Automatic
Pistols -A) Walther PPK-L Semi-Automatic Pistol
with Box - Serial no. 519257, 7.65 mm auto cal., 3 1/4
inch round bbl., blue/black anodized finish, plastic
grips. Also known as the “PPK-Dural”, this post-war
pistol was made in West Germany in 1967 using a
steel slide and a Duralumin alloy frame. It has postwar
“Eagle/N” commercial proofmarks present on the
barrel, slide, and frame, and a matching number on
the inside of the slide. With fixed sights, ring hammer,
60 degree safety/decocking lever, and lanyard staple in
the butt. With original “snakeskin” box, extra magazine,
bore rod, and papers.
CONDITION: Excellent with 98% plus original blue/
black anodized finish, and some light handling
marks. Grips are also excellent with crisp checkering.
Mechanically excellent. Box is fine with corner and
edge wear and complete label. B) Pre-World War II
Walther PP .22 LR Semi-Automatic Pistol - Serial no.
889803, 22 LR cal., 3 3/4 inch round bbl., blue finish, plastic grips.
Standard fixed blade front and notch rear sights, Walther banner, twoline
address, and caliber marking on left side of slide, “crown/N” proofs
on right side of frame and barrel chamber, 90 degree decocking safety,
and checkered Walther banner grips.
CONDITION: Excellent with 97% plus bright original blue finish, some
light edge wear at the front of the slide, and some small scattered
surface scratches. The grips are also excellent with sharp checkering
and some small dings. Mechanically excellent.
Estimate: 1600 - 2500
LOT 505
Collector’s Lot of Two Boxed Walther Semi-
Automatic Pistols -A) Walther PP Semi-Automatic
Pistol - Serial no. 367368, 7.65 mm auto cal., 3 3/4
inch round bbl., blue finish, plastic grips. Fixed blade
front and notch rear sights, standard markings on the
slide, “67” proof date on the barrel chamber, 60 degree
decocking safety, and checkered grips. Includes
original “snakeskin” box and extra magazine.
CONDITION: Excellent with 98% plus original blue
finish, light handling marks, and a faint trace of edge
wear at the front of the slide. Grips are also excellent
with sharp checkering. Mechanically excellent. Box is
good with corner and edge wear. B) Walther PPK .22
LR Semi-Automatic Pistol - Serial no. 106243LR, 22
LR cal., 3 1/4 inch round bbl., blue finish, plastic grips.
Manufactured in West Germany in 1967 with fixed
sights, the Walther banner and two-line address and
caliber markings on the left side of the slide, “67 (Ulm
antler)” on the chamber hood, “eagle/N” proofmarks,
matching serial number inside the slide, a 60 degree
safety and a pair of checkered Walther banner grips.
Includes original “snakeskin” box, test target, extra
magazine, and manual.
CONDITION: Excellent with 98% plus original blue
finish, a faint trace of edge wear at the front of the
slide, and some light handling marks. The grip is also
excellent with crisp checkering and some small dings.
Mechanically excellent. Box is fine with corner and
edge wear, and some discoloration.
Estimate: 1400 - 2250

Scarce Factory Engraved S&W Model 41 with Original Box!
LOT 506
Extraordinary Documented Russell J.
Smith Signed and Factory Engraved Early
Production Smith & Wesson Model
41 Semi-Automatic Target Pistol with
Original Box, Papers, and Factory Letter -
Serial no. 3307, 22 LR cal., 7 inch round bbl.,
blue finish, walnut grips. According to the
included factory letters (1993 and 2015
vintage), this pistol was shipped out from the
factory on February 25th, 1958, for distributor
W.H. Harris of Chicago, Illinois, making this a
very early production Model 41. Additionally,
the letters confirm the pistol was factory
engraved to Class A standards, a feature that
nearly tripled the price of the handgun. The
engraving is of a tight American scroll and
punch-dot style with occasional floral and
geometric accents, and covers over 75% of
the surface of the pistol, with the standard
markings left untouched. Fitted with a
ramp blade Patridge front sight and a fully
adjustable square notch rear sight, with an
alloy muzzle brake, scarce cocking indicator
(only found on the early 41s), serrated
trigger, checkered hardwood grips with
ambidextrous thumb rests and a full blue
10-round S&W magazine. The initials “RJS”
are present on the left side of the frame,
indicating Russell J. Smith as the factory
engraver on this project. Included with
the pistol is a hand numbered factory box (with “Eng” note on the underside), manual,
warranty card, barrel brush, the aforementioned factory letters, glossy photographs
of similar early factory engraved Model 41s, and a copy of the 12th
Edition (1958) of “Gun Digest”. The Digest features an illustration
of a similarly engraved “tool room” Model 41, and the contents
include a review of the 41; the review was released so early
in the production of the Model 41 that the writer had to
get a tool room 41 on loan from the company for testing
and favorably compared the pistol to the high-end Walther-
Hammerli pistols of the day.
CONDITION: Near new with original box, 99% plus original
blue finish showing some light handling marks. The grips are
excellent, with a few light dings and crisp checkering. The box
shows wear appropriate to age concentrated on the edges and
corners and some mild staining. Mechanically excellent.
These early master engraved Model 41s were
produced in very limited numbers and
are rare to find on the
market. If one were
looking for a top-flight
specimen of the genesis
of Smith & Wesson’s
famed Model 41 pistol,
they would find it right here.
Estimate: 7500 - 10000
NOTICE THE UNDERSIDE OF
THE BOX IS MARKED 3307 ENG.
355

BOTH SIDES PICTURED
Collector’s Fact
One of only 200
Pre-Model 26s
produced in .45 Colt.
The Dr. Gerald Klaz Collection
LOT 507
Rare Smith & Wesson 1950 .45 Colt Target Model (Pre-Model 26)
Double Action Revolver with Factory Letter - Serial no. S147355, 45
Colt cal., 6 1/2 inch solid rib bbl., blue finish, walnut grips. This is one of only 200 Pre-Model 26s chambered in .45 Colt. The accompanying factory letter lists this
revolver with a 6 1/2 inch barrel in rare .45 Colt caliber, blue finish and checkered walnut grips (currently fitted with replacement target grips) when shipped on
March 24, 1955 and delivered to Harvan Sporting Goods Co., New York City. The barrel is marked “SMITH & WESSON” on the left and “45 COLT CTG.” on the right.
The grips are marked “MADE IN ITALY” on the back. A trigger shoe has been installed. Matching serial numbers are on the butt, cylinder, and ejector shroud.
CONDITION: Excellent, retaining 99% plus original blue finish with a few minor handling marks and a cylinder drag line. Nearly all original case colors remain on
the hammer and trigger. The grips are fine as replacements with minimal handling marks and crisp checkering overall. Mechanically excellent.
Estimate: 5000 - 8000
BOTH SIDES PICTURED
356
LOT 508
Smith & Wesson .357 Registered Magnum Double Action
Revolver - Serial no. 47441, 357 magnum cal., 6 1/2 inch solid
rib bbl., blue finish, walnut grips. This is one of 1,518 Registered Magnums
manufactured with a 6 1/2 inch barrel. It has a Call bead front sight,
adjustable square notch rear sight, “REG. 880” stamped on the inside of the
frame, checkered walnut Magna grips with S&W medallions, right grip panel
numbered to a different revolver, and matching serial numbers on the butt,
cylinder and ejector shroud.
CONDITION: Excellent, retaining 98% plus original blue finish with slight
right side muzzle wear, minimal handling marks and a light cylinder drag
line. 99% plus original case colors remain on the hammer and trigger. The
grips are also excellent with minimal handling marks and crisp checkering
overall. Mechanically excellent.
Provenance: Dr. Gerald Klaz collection.
Estimate: 5500 - 7500
Collector’s Fact
One of 1,518
manufactured with a
6 1/2 inch barrel.

BOTH SIDES
PICTURED
Collector’s Fact
1 of only 869
manufactured with a
5 inch barrel.
BOTH SIDES
PICTURED
LOT 509
Smith &
Wesson .357 Registered
Magnum Double Action
Revolver with Shipping Tube - Serial
no. 49703, 357 magnum cal., 5 inch
solid rib bbl., blue finish, walnut grips.
Introduced in 1935, this is one of only 869
Registered Magnums manufactured with
a 5 inch barrel. It has a King bead front
sight, adjustable “U” notch rear sight, “REG. 1586” stamped
on the inside of the frame, and matching serial numbers on the butt, right
grip panel, cylinder, and ejector shroud. Unknown marking on the left side
of the frame has been struck out. Includes an original registration certificate
shipping tube, however, the certificate is not included. The mailing tube is
addressed to a Dr. W. P. Montgomery in Beatrice, NE. A scarce barrel length
Registered Magnum definitely worth of further research.
CONDITION: Very fine overall, retaining 90% original blue, light handling evidence, cylinder drag line, and sharp
grip checkering. The tube is also very
fine with light wear and legible label.
Mechanically excellent.
Provenance:
Dr. Gerald Klaz collection.
Estimate: 4500 - 6500
BOTH SIDES
PICTURED
LOT 511
England Shipped Engraved Smith & Wesson Third Model
Perfected Single Shot Target Pistol with Factory Letter -
Serial no. 5283, 22 LR cal., 10 inch solid rib bbl., blue finish, walnut
grips. Manufactured from 1909 to 1923. The pistol has been engraved with
some 30% coverage floral scroll engraving on a punch dot background.
A trigger stop mechanism has been installed in the triggerguard and the
pistol has also been converted to function as single action only. The right side of the
barrel and frame have Birmingham proofs along with “22 L” on the barrel. Fitted with checkered
walnut extension type grips. Matching serial numbers are on the front grip strap, barrel, and
barrel latch. The accompanying factory letter lists this pistol with a 10 inch barrel, Patridge front
sight, blue finish and checkered walnut extension target grips when shipped on March 12, 1912
and delivered to C. Osborne & Co., Birmingham, England. This shipment was for 10 units
all in the same configuration.
CONDITION: Very fine, showing 99% of the professional reapplied blue finish with a small area of light oxidation
and light handling evidence. The left side of the rear sight has been broken off. The grips have a few small dings
and well-defined checkering. Mechanically very good as single action only.
Provenance: Dr. Gerald Klaz collection.
Estimate: 2500 - 3750
The Dr. Gerald Klaz Collection
LOT 510
Engraved Smith & Wesson .38 Military & Police Model of 1905
Fourth Change Double Action Revolver with Carved Pearl
Grips - Serial no. 528327, 38 S&W special cal., 6 inch round bbl., nickel
finish, carved pearl grips. Manufactured from 1915 to 1942. Subsequently
engraved in the style of Wolf & Klar with wavy line borders and floral
motifs covering 75% of the revolver. The right grip has a carved steer head
with six Masonic button inlays including Mark Master Mason, Order of the Temple, Shriner, Blue
Lodge, York Rite 32nd Degree, and Grotto Lodge Mason.
CONDITION: Very fine as period replated, retaining 97% plus nickel finish, minor handling
evidence, areas of lightened engraving, a few deeper scratches near the muzzle, and some frosting.
The grips are very good with some cracking, a chip on each at the back, and missing on steer eye inlay.
Mechanically excellent.
Estimate: 1600 - 2500
LOT 512
Scarce Smith & Wesson “Straight Line Target” Single Shot Pistol with Factory Metal Case - Serial no. 827,
22 LR cal., 10 inch solid rib bbl., blue finish, walnut grips. Manufactured from 1925 to 1936. Patridge blade front
and adjustable square notch rear sights, with the one-line address on the rib, “SMITH & WESSON” on the left side,
and the caliber marking on the right. Fitted with smooth S&W medallion grips. Includes an original blue steel
S&W case, two-piece cleaning rod, and screwdriver.
CONDITION: Very fine overall, retaining 90% original blue finish, mild handling evidence, scattered light spotting,
and a small bulge on the left of the frame. The case is excellent with minor storage evidence.
Mechanically excellent.
Estimate: 1800 - 2750
357

BOTH SIDES PICTURED
358
LOT 513
Desirable
Smith & Wesson .357 Registered
Magnum Double Action Revolver
with Original Box and Factory
Letter - Serial no. 46625, 357 magnum
cal., 8 3/4 inch solid rib bbl., blue finish, walnut
grips. Only approximately 5,400 Registered
Magnums were manufactured between 1935 and
1939 and are virtually custom made revolvers that
remain “state of the art” in handgun manufacture
today. This particular Registered Magnum, number
413, is one of 735 Registered Magnums manufactured
with an 8 3/4 inch barrel. It has a pinned Marble No.
35F blade front sight, adjustable “U” notched rear
sight, S&W grip adaptor, unnumbered checkered grip featuring
S&W medallions and trigger shoe. A factory service department
star is stamped on the butt, and a factory June 1945 return date (“6.45”) is stamped on the left side of the grip frame. Both
are “cut-through” the finish which indicates the work performed was a repair or mechanical adjustment. No refinish marks
are found and the bluing appears to be completely original. Matching serial numbers are on the butt, cylinder, and ejector
shroud. The included factory letter lists this revolver with an 8 3/4 inch barrel, Paine bead front sight, “U” notched rear sight, blue finish and checkered
walnut grips when shipped on September 11, 1935 and delivered to Dave Cooks Sporting Goods Co. of Denver, CO. Comes with the original S&W box
correctly numbered to gun (white label with serial number and registration number).
CONDITION: Excellent, retaining 98% plus original blue and casehardened finishes with limited handling marks and a cylinder drag line. The grips are
excellent with crisp checkering. Mechanically excellent. The box is excellent showing edge wear and retaining much of the illustration on the exterior of the lid.
Estimate: 6000 - 8000
LOT 514
Cased Pair of Angelo Bee Signed, Engraved,
and Gold Inlaid Smith & Wesson Double
Action Revolvers -A) Smith & Wesson Model
66-1 Revolver - Serial no. 99K0759, 357 magnum cal., 2 1/2 inch
solid rib bbl., stainless/gold finish, smooth grips.
Manufactured in 1981 then embellished by Master
Engraver Angelo Bee with near full coverage floral
scroll engraving on a punchdot background and
gold inlaid game scenes on either side of the
frame. The left shows a deer running across a
field and the right shows a bear having just
pulled a salmon from the river. The barrel
markings on either side have been inlaid in
gold. Bee signed his work “A.BEE (bumblebee)”
on the right side of the frame just below the bear.
Includes a fitted hardwood case that houses both guns, walnut
handled tools, oiler, and a small box containing cleaning tools
as well as a certificate of authenticity from Angelo Bee.
CONDITION: Excellent as masterfully
embellished by Angelo Bee, showing
minimal handling evidence and a
few small superficial age cracks in the
grips. The case is very fine other than the detached hinge and the
accessories are excellent. Mechanically excellent. B) Smith & Wesson
Model 60 Revolver - Serial no. R273738, 38 special cal., 2 inch solid rib
bbl., stainless/gold finish, smooth grips. Manufactured in 1979/80 then
embellished by Master Engraver Angelo Bee with near full coverage floral scroll engraving
on a punchdot background with gold inlaid game scenes on either side. The right shows an eagle taking
its prey and the left shows a rabbit on alert above Bee’s signature “A.BEE/(bumblebee). Includes certificate
of authenticity from Angelo Bee. The barrel markings are also inlaid with gold.
CONDITION: Excellent as masterfully embellished by Angelo Bee, showing minimal handling evidence
and a very tiny chip from the left grip. Mechanically excellent.
Estimate: 7000 - 10000

LOT 515
Cased Pair of Consecutively Serial
Numbered Angelo Bee Signed
and Engraved Smith &
Wesson Model 60 Double
Action Revolvers
-A) Smith & Wesson
Model 60 Revolver -
Serial no. R258476, 38
S&W special cal., 2 inch
solid rib bbl., stainless
finish, smooth grips. The
pair was manufactured in
1979/80 and subsequently
masterfully engraved by
renowned Master Engraver
Angelo Bee. Each revolver has near
full coverage floral scroll engraving on a punch
dot background as well as a gold inlaid S&W logo on
the left side of the frame. The right side of each
frame shows a raised relief eagle descending
on some unknown prey. Bee’s signature
“ABEE” is present just ahead of the eagle
with his trademark bee on both revolvers.
The revolvers are housed together in a
glass and copper display case lined with
brandywine velvet. Consecutively serial
numbered to the “B” gun.
CONDITION: Excellent as professionally
embellished by Master Engraver Angelo
Bee and showing minimal handling
evidence. The case is very fine with an
attractive aged patina to the support structure
and clear glass. Mechanically excellent.
B) Smith & Wesson Model 60 Revolver - Serial no.
R258477, 38 S&W special cal., 2 inch solid rib
bbl., stainless finish, smooth grips. See “A”.
Consecutively serial numbered to “A”.
CONDITION: Excellent as professionally
embellished by Master Engraver Angelo Bee and
showing minimal handling evidence. Mechanically excellent.
Estimate: 7500 - 10000
BOTH SIDES
PICTURED
BOTH SIDES
PICTURED
The David Terbrueggen Collection
LOT 516
Gino Cargnel
Signed, Engraved,
and Gold Inlaid Smith & Wesson Model 629-1 Double Action Revolver with Case - Serial no.
N947807, 44 Magnum cal., 6 inch solid rib bbl., stainless finish, smooth grips. Manufactured between 1982 and 1986
and subsequently embellished by Master Engraver Gino Cargnel. The revolver shows near full coverage in floral scroll
engraving. Gold band at the muzzle with an inlaid cougar’s head on the left side of the frame and a cougar set to
pounce on the right side. The initials “V” and “B” are inlaid in gold on the recoil shield. Signed “G. CARGNEL” beneath the
cylinder on the left of the frame. Includes a glass topped display case.
CONDITION: Excellent as professionally embellished, showing limited handling evidence, and some light age cracks in
the grips. The case is excellent. Mechanically excellent.
Estimate: 2500 - 4000
LOT 517
Engraved Smith & Wesson K-22 Pre-
Model 17 Double Action Revolver - Serial
no. K282924, 22 LR cal., 6 inch solid rib bbl.,
blue finish, stag grips. Manufactured in 1956 and subsequently
professionally embellished with 60% coverage floral scroll
engraving on a fine punch dot background. Small “H” under the
cylinder release, likely the engraver’s mark. Matching serial number
on the butt, cylinder, and barrel.
CONDITION: Excellent as professionally embellished, retaining
99% reapplied blue, and limited handling evidence. The grips also
excellent. Mechanically excellent.
Estimate: 1500 - 2500
359

360
LOT 518
Outstanding, Iconic and Well Documented
Special Order Cased Set of Two Factory
Master Engraved Colt Woodsman Semi-
Automatic Pistols by Master Engraver
George Spring with Factory Letter and
Boxes from the Collection of Bob Rayburn
-A) Factory Master Engraved Special Order
Gold Plated Colt Third Series Woodsman
Target Model Semi-Automatic Pistol -
Serial no. 043136S, 22 LR cal., 5 inch round
bbl., gold finish, replacement grips. This
beautiful and attractive cased set consists
of two Third Series Colt Woodsman pistols
manufactured in 1973 and factory special
ordered and made for Major Robert Rayburn,
noted Woodsman expert and author of the
“Colt Woodsman Pocket Guide”. This Target
Model features an unprecedented 5 inch
round barrel which is the only known example
in this barrel length (the standard length is
6”). The entire pistol has a brilliant factory
gold plated finish featuring fine American
style factory type “A” scroll engraving with
subtle punch dot accents on the rear of the
barrel, forward and rear sides of the frame
and on the slide. The back strap is inscribed
“MAJ. R. RAYBURN”. The left front of the
frame is marked with the Rapant Colt over
“WOODSMAN” and the left side of the slide is
marked “COLT” followed by “AUTOMATIC/CAL.
22 LONG RIFLE”. The serial number is marked
on the right front of the frame. Ramped
blade front sight and adjustable rear target
sight, gold “COLT CAL. 22” marked magazine
and fitted with a pair of smooth grips with
a right hand thumb rest. The accompanying
factory letter covers both pistols and verifies
the caliber, barrel lengths, full bright silver
finish, (gun “B”) and full bright gold finish (this
pistol), the “Type A” engraving by Colt Master
Engraver George Spring, inscription on the
back straps and the blue leather presentation
case with gold embossed inscription and that
they were shipped to Sile Distributors Inc. in
Meriden, CT. on June 9, 1987. The remarks
also state that the set was built expressly
for Major R. Rayburn by Colt and confirms
the Custom Shop Order Numbers 3008 and
3009. The pistols were originally shipped with
“Standard Wood” grips. The pistols come in
a double dark blue presentation case with
French fit royal blue velvet interior with a
gold filled embossed border and gold filled
embossed inscription “WOODSMAN .22/BUILT
EXPRESSLY/FOR/MAJ. R. RAYBURN/BY/COLT
FIREARMS” on the lid The pair also come with
the original Colt Custom Shop boxes. The box
for this pistol has an end label marked with
the Model Number “S1161s1”, “C.S. #3009”, the
serial number, “Custom Engraved Woodsman”
and “Target Model, .22c, 5” bbl, gold plated
finish/w/custom case”.

Well-Documented Set of Factory Engraved Colt Woodsman Pistols -
Special Ordered & Made for Woodsman Expert & Author Major Robert Rayburn
THIS PISTOL HAS A
DOCUMENTED 5 INCH BARREL,
AND IS THE ONLY KNOWN
EXAMPLE OF ITS TYPE
CONDITION: Excellent with 99% original factory gold plating, and a few light handling marks overall. The
grips are excellent with only light handling/storage marks. The case is excellent with only slight handling
and storage marks on the exterior and compression marks on the interior where the pistols rest.
B) Factory Master Engraved Special Order Silver Plated Colt Third Series Woodsman Sport
Model Pistol - Serial no. 043049S, 22 LR cal., 3 1/2 inch round bbl., silver finish, replacement grips. This
beautiful companion pistol is a Sport Model with again an exceptionally rare barrel length, 3 1/2 inches,
and finished in bright special order silver plating, including the “COLT CAL. 22” marked magazine. The
markings, engraving, inscription and grips are all identical to gun “A”. This pistols box end label is marked
with the Model “S1141S1”, “C.S. #3008”, serial number, description “Custom Engraved Woodsman” and
“Sport Model .22c, 3 1/2” bbl, silver plated w/custom case”.
CONDITION: Excellent with 99% original bright factory silver plating, showing only light handling marks
overall, and small traces of a slightly age darkening. The grips very good with a very small age crack on
the butt of the left panel and only light handling/storage marks overall. Mechanically excellent.
Estimate: 16000 - 27500
361

Exceptional One-of-a-Kind Master Engraved and Gold Inlaid Colt SAA Produced Specifically for the 2012 Colt Collectors Association
362
LOT 519
Outstanding One-of-a-Kind Master Engraved and
Gold Inlaid Jim Blair Signed Colt Single Action Army
Buntline Special 2012 Colt Collectors Association
Auction Revolver with Factory Letter and Display
Case - Serial no. CCA2012, 45 Long Colt cal., 9 inch round
bbl., blue/french gray finish, carved grips. The included
(3 page) factory letter lists the serial number, caliber,
original barrel length as 12 inches, and a long list of
factory ordered special features, to include the precious
metal inlays, engraving by Jim Blair, carved grips by
William B. Ellis, and custom exhibition grade museum
display case. The letter goes into great detail on all of
the major features of the engraving, the case and the
accessories, and lists specifically that it was produced for
auction at the 2012 Colt Collectors Association auction
on October 6, 2012 in Denver, Colorado. This fantastic,
exceptionally well finished, and highly embellished
Buntline Special Single Action revolver features a full
blue finish with contrasting French gray accents, highly
detailed engraved panels on the barrel sides depicting a
Native American encampment on the right, and a steam
locomotive on the left. The one-line address on top of
the barrel at the breech is surrounded by finely detailed,
French gray, leafy scroll. The underside of the barrel is
signed “Jim Blair” in fancy script. The cylinder is engraved
with fine scroll, French gray leaf accents on the flats, and
gold inlaid leafy scroll at the rear. The frame features
matching scroll engraving against very fine punch-dot
backgrounds and horse and rider scenes on the sides
with a French Canadian trapper on the right and a Native
American on the left. The loading gate is engraved with
a shovel and pick and features gold and silver inlays. The
left side of the recoil shield is engraved and features a
gold inlaid American bison bust. The top of the grip
frame has a gold inlaid beaver, and the center
of the backstrap has a gold and silver inlaid
longhorn steer head.The one-piece grip is
smooth on the right and features a detailed
relief carved horse on the left. The display case
features a slide out, fitted drawer for the revolver
with engraved, ebony handled, 1800s period style
cleaning rod and screw drivers with the accents
engraved by Michael Dubber. Upper display area
containing a large piece of Colorado petrified
wood with iron pyrite accents, small bronze miner
statue, scrimshawed and colored panel depicting
a French Canadian fur trapper in a canoe, small
glass vial of Colorado gold dust, and a gold colored
presentation plaque inscribed “The Colorado
Rendezvous/COLT COLLECTORS ASSOCIATION/
Single Action Army .45 Buntline Special/SN
CCA2012/Master Engraved BY Jim Blair”.
CONDITION: Near new overall with only the
lightest collector type marks overall, sharp
detailed engraving, complete gold inlays,
and very sharp carving on the grip. The case and
accessories are excellent overall. An absolutely
fantastic, eye catching masterwork Single Action
Revolver produced specifically for the 2012
Collectors Association auction
Estimate: 15000 - 25000

BOTH SIDES
PICTURED
LOT 520
Cased Pair of M.W. Dubber American
Independence Theme Engraved and Inlaid Colt
Third Generation Single Action Army Revolvers with
Boxes -A) Colt Single Action Army Revolver - Serial no.
SA62817, 45 LC cal.,
5 1/2 inch
round bbl.,
blue finish,
smooth grips.
Manufactured in
1982 and subsequently masterfully embellished by
Michael W. Dubber in 2011. Dubber has beautifully
embellished the revolver with 75% plus American style
floral scroll engraving and profuse patriotic themed and
border gold and silver inlays which feature the Pennsylvania
state house, “1776”, Gadsden flag logo, eagle heads, crossed
muskets and 13-star flag, and “E Pluribus Unum” banner, as well as being fitted
with a smooth one piece grip. Dubber has signed and dated the work on the
bottom of the barrel. Both revolvers in this lot are fitted in a Colt marked hardwood
display case with a glass top and plaque marked “THE INDEPENDENCE COLTS/
VIRTUE LIBERTY [liberty bell] INDEPENDENCE/
By: M.W. Dubber, Master Engraver”. Includes the
original box. A pair of magnificent works of art by
renowned Master Engraver, M.W. Dubber that are
beautifully displayed!
CONDITION: Excellent overall as master embellished by Michael Dubber, retains 99% plus
blue finish and gold and silver inlays with only the slightest handling marks. Mechanically
excellent. The case is also excellent with minimal handling evidence and the box is fine
with moderate wear. B) Colt Single Action Army Revolver - Serial no. SA55809, 45 LC cal.,
5 1/2 inch round bbl., blue finish, smooth grips. Manufactured in 1981 and subsequently
masterfully embellished by Michael W. Dubber in 2011. Dubber has beautifully embellished
the revolver with 75% plus American style floral scroll engraving and profuse patriotic
themed and border gold and silver inlays which feature the liberty bell, eagles, cannon, shield of the great seal, powder horn, “JULY4”, and the
eye of providence, as well as being fitted with a smooth one piece grip. Dubber has signed and dated the work on the bottom of the barrel.
Includes the original box.
CONDITION: Excellent overall as master embellished by Michael Dubber, retains 99% plus blue finish and gold and silver inlays with only the
slightest handling marks. Mechanically excellent. The box is fine with moderate wear.
Estimate: 8000 - 12000
BOTH SIDES
PICTURED
LOT 521
Michael W. Dubber Signed Engraved
Gold and Platinum Inlaid Colt Third
Generation Single Action Army Revolver with Display Case - Serial no.
S30717A, 45 LC cal., 5 1/2 inch round bbl., blue finish, smooth grips. Originally
manufactured in 2000, this revolver was masterfully embellished by Michael W.
Dubber in 2008, who signed his work on the bottom of the barrel. The revolver features
approximately 90% coverage American style floral scroll relief engraving with a stippled
background and profuse gold and platinum inlaid bands and borders. It also features relief
gold inlaid bust of Samuel Colt on the recoil shield, gold and platinum Colt factory dome on the
loading gate, Armsmear Colt on the ejector rod housing, “four-head” Armsmear logo at the top of the back strap
in gold, gold serpentine logo on the right of the frame, and “Sam Colt” in gold on the back strap. Includes a letter
of authentication from Dubber detailing the embellishment, the grips by Dan Chesiak, and blue oxide finish by
Doug Turnbull, as well as a Colt glass-top display case.
CONDITION: Excellent as masterfully embellished by M. W. Dubber, retains 99% plus of the Turnbull blue oxide finish and bright
inlays with only the slightest handling marks. The grips are also excellent with only the slightest handling marks and attractive
grain/color. Mechanically excellent. The case is also excellent with minimal handling/storage evidence.
Estimate: 3500 - 5500
363

364
LOT 522
Collector’s Cased Set of Three Factory Master Engraved Colt Third
Generation Bird’s Head Single Action Army Revolvers with Factory
Letters and Boxes -A) George Spring Engraved Colt Single Action
Army Revolver - Serial no. SA92054, 44-40 cal., 7 1/2 inch round bbl.,
nickel finish, smooth bird’s head grips. Each of the revolvers in this set
were manufactured in consecutive years, 1989, 1990, and 1991, and were
all shipped to the same location. The revolvers share nearly identical
characteristics apart from barrel length and were clearly ordered with the
intention of being a set as they also share the Colt Custom Shop order
number #3631. The included factory letter with each confirms the caliber,
barrel length, nickel finish with fire blue screws, smooth grips, the class “B”
custom scroll master engraving, and shipment to Stacy Williams Company
in Birmingham, Alabama. The “A” and “B” revolvers were engraved by
George Spring and the “C” revolver was engraved by Dennis Kies but the
Nimschke/American style scroll engraving is identical. The bird’s head grip
configuration is confirmed on the factory letter for the “C” revolver. The set
is contained in a Colt hardwood case fitted for the three revolvers and lined
with grey velvet and the original box for each revolver is included.
CONDITION: Excellent overall, retains 99% plus original nickel finish and
nitre blue on the small parts with only the slightest handling marks overall.
Mechanically excellent. The case is very fine with a few scattered minor
handling/storage marks.
B) George Spring Engraved Colt Single Action Army Revolver - Serial
no. SA92504, 44-40 cal., 5 1/2 inch round bbl., nickel finish, smooth bird’s
head grips. Manufactured in 1990. See “A”.
CONDITION: Excellent overall, retains 99% plus original nickel finish and
nitre blue on the small parts with only the slightest handling marks overall.
Mechanically excellent. C) Dennis Kies Engraved Colt Single Action
Army Revolver - Serial no. SA91636, 44-40 cal., 4 3/4 inch round bbl.,
nickel finish, smooth bird’s head grips. Manufactured 1991. See “A”.
CONDITION: Excellent overall, retains 99% plus original nickel finish and
nitre blue on the small parts with only the slightest handling marks overall.
Mechanically excellent. An exceptionally attractive cased set of factory
engraved Colt Single Action Army revolvers!
Estimate: 9000 - 14000

BOTH SIDES
PICTURED
LOT 523
Outstanding Master Engraved and Signed John
Warren Colt Single Action Army Revolver - Serial
no. 55266SA, 45 LC cal., 7 1/2 inch round bbl., nickel
finish, plastic grips. This is an excellent example of a
John Warren signed and engraved Single Action Army
Revolver. Blade front and notch rear sights on a barrel with the one line Hartford address on the top and caliber markings on
the left side. The smokeless powder frame is marked with the two line, three date patents next to the circled Rampant Colt on
the left side. The revolver has a crescent-style ejector. Matching numbers on the grip straps, with the assembly number “536” on
the loading gate. As stated, this revolver is Master engraved by the late renown John Warren of Massachusetts, with 80% coverage,
primarily scrollwork with punch-dot backgrounds.
Burst patterns are featured on the recoil shield,
loading gate, backstrap and the ends of the
cylinder flutes, and a panel on the backstrap
suitable for inscriptions. The front of the frame is signed by the
engraver (“John Warren ENG.”). Fitted with checkered hard rubber grips,
with Rampant Colt logos at the tops and American Eagles at the bottoms.
CONDITION: Excellent overall as Master embellished by John Warren, retains 98% nickel finish with only minor handling marks and a few areas
of light frosting. Grips are also excellent. Mechanically excellent.
Estimate: 4000 - 6000
BOTH SIDES PICTURED
LOT 524
Ken Hurst Signed Master Engraved Colt Third
Generation Black Powder Frame Frontier Six Shooter Single Action Army Revolver
with Case - Serial no. SA67285, 44-40 cal., 7 1/2 inch round bbl., antique nickel finish, smooth grips.
Manufactured in 1986 and subsequently masterfully embellished by Ken Hurst, who was one of
only two engravers after World War II to have been a master engraver for both Colt and Winchester. The revolver has the black
powder frame and standard Colt Frontier Six Shooter markings as well as 90% coverage, beautifully executed, floral scroll engraving in
the Nimschke/American style with eagle heads on either side of the barrel near the muzzle that are incorporated into the scroll. Hurst has
signed his work “K. HURST” discreetly above the serial number on the frame and the front strap under the grip is stamped “HURST”. Includes
a Colt glass top display case lined in red velvet.
CONDITION: Excellent overall as master embellished by Ken Hurst, retains 99% plus of the antique nickel finish with only the slightest handling marks and crisp
engraving. The otherwise excellent grip is slightly ill-fitting with some small gaps between the panels and the back strap near the butt. The case is excellent with only
the slightest handling/storage marks.
Estimate: 3000 - 4500
BOTH SIDES
PICTURED
LOT 525
Shannon Signed Engraved Colt Second Generation Single Action Army Revolver - Serial
no. 18517SA, 45 LC cal., 4 3/4 inch round bbl., nickel finish, smooth grips. Manufactured in 1958 and
subsequently professionally embellished in 1970 with 75% plus coverage American style floral scroll
engraving, nitre blue small parts, and fitted with smooth grips with Colt medallions. The engraving is
signed “ENGRAVED BY SHANNON 9-70” on the bottom of the ejector rod housing.
CONDITION: Very fine as professionally embellished, retains 99% plus nickel plating and most of the nitre blue on
the small parts with a few scattered patches of light pitting visible under the nickel and crisp engraving. The grips
are fine with a few hairline age cracks and
a couple added pieces visible near the
top of each panel likely to help with fit.
Mechanically fine.
Estimate: 2500 - 3500
365

BOTH SIDES
PICTURED
BOTH SIDES
PICTURED
LOT 526
Ken Hurst
Signed Master
Engraved Gold Inlaid Wyatt Earp Colt Buntline Special Single Action Army
Revolver - Serial no. 71799SA, 45 Long Colt cal., 12 inch round bbl., blue/casehardened finish, hardwood grips. Manufactured
in 1975 and subsequently (1996) embellished by Master Engraver Ken Hurst. The barrel features floral scroll and feather designs
with a punch dot background, as well as a feather design on the top center with gold signature “Wyatt Earp” on top. There is a thin gold
band around the muzzle and two bands around the breech end. The “COLT BUNTLINE SPECIAL .45” on the left side of the barrel is in gold. The sides of the
front sight have a feather design. Casehardened frame, with six shot unfluted cylinder and standard patent markings in gold on the left side of the frame. Cylinder
has two silver engraved portraits. Left side of frame has gold tombstones and crosses ahead of the cylinder and a gold leaf portrait behind the cylinder. Right side
has gold “O.K.” ahead of cylinder and gold shotgun below cylinder. The frame also has decorative gold accents and bordering. The back strap has gold inlaid image
of a hanging man. Buttstrap has engraved banner with gold “10-26-81”. Standard blade front and frame notch rear sights and fitted with custom one piece, nicely grained black walnut grip. The back strap
under the grip is signed “K HURST” twice, and the inside rear of the grip is hand-marked “”96” K. HURST”.
CONDITION: Masterfully embellished by Ken Hurst, with 99% plus blue finish and case colors remaining. There is a small area on the back strap where the gold has flaked, otherwise excellent. The grip is near
mint with only a few very minor dings and handling marks. The markings and engraving remain crisp and clear. Mechanically excellent. A very nice Master Engraved Single Action Army revolver.
Estimate: 4500 - 6500
LOT 527
Cased Pair of Consecutively Serial Numbered Engraved, Gold Inlaid Colt Single
Action Army Revolvers -A) Engraved Gold Inlaid Colt Single Action Army
Revolver - Serial no. 42011SA, 45 LC cal., 7 1/2 inch round bbl., blue finish, checkered
grips. Both revolvers were manufactured in 1966 and subsequently professionally embellished. The revolvers
feature floral scroll engraving on the barrel, frame, cylinder, hammer, backstrap, front sight and trigger guard and a feather design on the sides of
the top strap, top of the ejector housing and outer edges of the trigger guard plate. There are gold inlaid highlights throughout the scroll designs.
In addition, there is a decorative band, dot and fleur de lis design on the muzzle, a single gold band around the breech end of the barrel and gold
band bordering on the frame, recoil shield and top of the backstrap. The recoil shield features a gold inlaid American eagle with an olive branch and arrows
in his talons on a matte background. The loading gate has a gold band border and in the center what appears to be a gold inlaid intertwined “RS” with a line
beneath it. Around the rear of the cylinder are gold inlaid stars, and the top of the backstrap has a yellow and rose gold sunflower on a matte background.
The top of the barrel is marked with the standard one line address, the left side “COLT
SINGLE ACTION ARMY .45”, and the left side of the frame is marked with the twoline,
three patent dates followed by the Rampant Colt. The revolvers are fitted with
checkered grips and gold buttcaps
which are engraved with a floral
scroll pattern around the edges and
a crest in the center with a banner
below which reads “SANS PEUR”
(French translation: Without Fear);
the symbols and motto of the crest
are that of Clan Sutherland of the
Scottish Highlands. Both revolvers are fitted in a Colt wooden
presentation case with red velvet lining.
CONDITION: Excellent as professionally embellished with 99%
plus of the bright blue finish with light handling marks overall.
All of the gold inlay remain, and the engraving is sharp.The
grips are excellent with an attractive aged patina in the grain
and some overall darkening with age. Mechanically excellent.
B) Engraved Gold Inlaid Colt Single Action Army
Revolver - Serial no. 42010SA, 45 LC cal., 7 1/2 inch round bbl.,
blue finish, checkered grips. As described in “A”.
CONDITION: Excellent as professionally embellished with 99%
plus of the bright blue finish with a few minor scratches on
the front underside portion of the barrel and light handling
marks overall. All of the gold inlay remains, and the engraving
is sharp. The grips are excellent with an attractive aged patina
in the grain and some overall darkening with age. There is a
small ding on the toe of the buttcap. Mechanically excellent.
Estimate: 7000 - 9000
366

BOTH SIDES
PICTURED
BOTH SIDES PICTURED
LOT 528
Cased Pair of Cecil Mills Signed
Engraved, and Gold Inlaid Colt Third
Generation Single Action Army
Revolvers with Boxes
-A) Colt Single Action Army Revolver - Serial no. SA58684,
45 LC cal., 5 1/2 inch round bbl., blue/gold finish, scrimshawed
grips. Both manufactured in 1983 and subsequently
embellished by Cecil J. Mills of Los Angeles, CA. The embellishments consist of floral scroll
engraving on a punch dot background covering 75% plus of each gun. The engraving is
surrounded by gold inlaid borders with light scrolls at the ends. The “A” gun shows a gold inlaid
bust of a cougar on the recoil shield above the signature “C. MILLS ‘83” and “B” has a gold inlaid
eagle and “C. MILLS/’83”. The left grip of each gun is scrimshawed with a Rampant Colt and
American eagle. Judge Cecil J. Mills was student of Angelo Bee as well as a student of the School
of Engraving in Trinidad, CO. Mills was the Superior Court judge who appointed Judge Lance Ito
to sit as the judge on the O. J. Simpson murder trial of 1994/95. Includes a hardwood case that
house both guns as well as the original Colt “wood grain” box for both guns.
CONDITION: Excellent as professionally embellished, retaining 98% plus blue finish, minor
handling evidence, a small flake on the ejector shroud, and some light discoloration in some
of the gold. The grips are slightly undersized but are otherwise excellent. The box is good with
significant wear and a few tears. Mechanically excellent. Case is very good.
B) Colt Single Action Army Revolver - Serial no. SA52150, 45 LC cal., 5 1/2 inch round bbl.,
blue/gold finish, scrimshawed grips. See “A”.
CONDITION: Excellent as professionally embellished, showing 99% plus original blue, limited
handling evidence, and minor light discoloration is areas of the gold. The grips are slightly
undersized and show some age crack but are overall very fine. The box is good with some tears
and significant wear. Mechanically excellent.
Estimate: 5000 - 7000
LOT 529
Magnificent Master Engraved Gold
Inlaid Colt Single Action Army Revolver with Original Box and
Factory Letter - Serial no. SA96683, 45 Long Colt cal., 7 1/2 inch round bbl., blue finish, original
grips. According to the included factory letter, this revolver was shipped to Southern Ohio Distributors
of Lebanon, Ohio on July 30, 1992. In addition to confirming the configuration and grips, the letter states
the revolver was shipped “white”, unfinished for custom embellishment. Though the gun is unsigned the quality is certainly that
of a Master engraver. Standard markings, with the addition of custom floral, scroll and geometric patterns on the barrel, frame,
cylinder, hammer sides, trigger guard, backstrap and butt. There are thin gold bands around the muzzle, breech, ejector housing,
and cylinder, gold vine work on the cylinder as well as gold wire borders on the frame, hammer and recoil shields. Fitted with
one-piece smooth grips numbered to gun. Complete with the original two-piece blue Colt box and white outer box with Custom
Shop label numbered to the gun.
CONDITION: Excellent as Master embellished, with very slight handling marks. Mechanically excellent. Box is good.
Estimate: 3500 - 5500
BOTH SIDES
PICTURED
LOT 530
Master Angelo Bee Signed and Gold Inlaid Colt
Single Action Army Revolver - Serial no. 55816SA, 45 LC cal., 5 1/2 inch
round bbl., blue finish, smooth grips. Manufactured in 1970. This revolver features
all gold markings and gold etched vine patterns on the barrel, frame, cylinder,
ejector housing and grip straps. There is also a gold band around the breech end of the barrel and
double gold bands around the muzzle. In addition there is a gold low relief revolver on the loading gate, mountain
lion on the right rear of the frame, rattlesnake on the top of the back strap and eagle on the recoil shield. The
Rampant Colt behind the patent marking is also gold low relief. Standard markings, blade front and frame notch
rear sights, all blue finish with polished hammer sides and fitted with smooth two piece grips with gold Colt medallions at the
top. The toe of the back strap is signed “ABEE” and has his signature bee next to it.
CONDITION: Excellent as Master embellished by Angelo Bee. The revolver retains 99% plus blue finish with minor handling marks.
All of the gold remains. The grips are also excellent with an attractive grain and light overall handling marks.
Mechanically excellent.
Estimate: 3750 - 5000
367

BOTH SIDES
PICTURED
LOT 531
Ben Lane Signed Engraved
Colt Third Generation Single
Action Army Revolver with
Case and Box - Serial no. S64350A, 45 LC
cal., 4 3/4 inch round bbl., nickel finish,
smooth grips. Manufactured in 2009 and
subsequently masterfully embellished with 75%
coverage American style floral scroll engraving, blue gemstones
inset on the recoil shield, loading gate, and each side of the
frame at the breech, as well as nitre blue small parts and a
smooth one piece grip with Colt medallions. The embellishment
is signed with Ben Lane’s “BL” monogram just in front of the trigger guard. Includes a
Colt marked hardwood case, orginal shipping box, and Colt blue box.
CONDITION: Excellent overall as masterfully embellished by Ben Lane, retains
99% plus nickel and nitre blue finishes with only the slightest handling marks.
Mechanically excellent. The case is very fine with a few scattered minor handling/
storage marks and the boxes are very fine with minimal wear.
Estimate: 2750 - 4000
BOTH SIDES
PICTURED
368
LOT 532
Cased Consecutively Serialized
Pair of M.W. Dubber Signed
Engraved Colt Third Generations
Single Action Army Revolvers with
Certificates of Authenticity
-A) Colt Single Action Army Revolver - Serial no. S39158A,
32-20 cal., 4 3/4 inch round bbl., antique nickel/nitre blue
finish, smooth grips. Both revolvers were manufactured in
2005 and subsequently beautifully embellished by Master
Engraver Michael W. Dubber. The revolvers each feature
matching, 90% coverage, American/Nimschke style floral
scroll engraving and finished with an antique nickel plating
with ink-darkened backgrounds and nitre blue small parts. Dubber has signed each revolver on the bottom of the
barrels and numbered them “1 of 2” and “2 of 2” respectively. The certificates of authenticity list the final finish of the
revolvers by John Powers and the grips fitted by Nutmeg Sports. The included Colt marked, hardwood case fitted
for both revolvers is listed as made by Bill Shumate and has an interior button of the same material as the grips
scrimshawed with the Colt serpentine logo. A masterfully engraved pair of Colt Single Action Army revolvers that
could become an instant family heirloom!
CONDITION: Excellent as master embellished by M.W. Dubber, retains 99% plus antique nickel and nitre blue finishes with only the slightest handling marks. The grip is very
fine with some attractive age-related hairline cracks/grain. Mechanically excellent. The case is also excellent with minimal handling/storage wear.
B) Colt Single Action Army Revolver - Serial no. S39159A, 32-20 cal., 4 3/4 inch round bbl., antique nickel/nitre blue finish, smooth grips. See “A”.
CONDITION: Excellent as master embellished by M.W. Dubber, retains 99% plus antique nickel and nitre blue finishes with only the slightest handling marks. The grip is very
fine with some attractive age-related hairline cracks/grain. Mechanically excellent.
Estimate: 5000 - 9000

BOTH SIDES
PICTURED
LOT 533
Factory Class “D” Engraved Colt Single Action
Army Revolver with Case - Serial no. SA28114, 45
cal., 7 1/2 inch round bbl., nickel finish, walnut grips.
Manufactured in 1979. The revolver features the elaborate Colt
factory type “D” engraving which covers virtually every surface.
The master scroll engraving covers the barrel and ejector housing,
including the blade front sight. Every major part, except for the
hammer, trigger and front grip strap, shows this fine pattern; going around the full
circumference of the unfluted cylinder, down into the lower parts of the frame near
the cylinder pin latch, around the recoil shield and crossing the loading gate. The
revolver has standard Colt barrel and frame markings with the cylinder and grip straps
numbered to the gun. The trigger guard is marked with the Colt triangle proof and “K” on the left side
with “D” on the right. Fitted with a smooth grip featuring silver Rampant Colt medallions at the top. With a
brown leatherette Colt presentation case.
CONDITION: Excellent. The revolver retains 99% plus original nickel finish showing some frost on the
hammer. The grips are excellent with a few light handling marks. Mechanically excellent. The case is good
with some loss of the leatherette covering and worn lining.
Estimate: 3500 - 4750
BOTH SIDES
PICTURED
LOT 534
Factory Inscribed, Engraved,
and Silver Plated Colt Third
Generation Single Action Army Revolver with Relief Carved
Eagle Grip and Box - Serial no. SA99571, 45 LC cal., 4 3/4 inch round
bbl., silver finish, relief carved grips. Manufactured in 1993 with standard
markings and features as well as factory class “C” floral scroll engraving,
full silver plating, “Jas. E Mc.Gee” inscribed on the back strap, and relief carved
eagle grip. Includes the original shipping sleeve with Colt Custom Shop label that
confirms the engraving and back strap inscription and Colt blue box.
CONDITION: Excellent, retains 99% plus original silver plating with a few scattered light
handling marks and faint traces of a cylinder drag line. The slightly undersized grip is very
good with some hairline age cracks and crisp carving. Mechanically excellent. The boxes are
very good with some light handling/storage wear and tear.
Estimate: 3000 - 4250
BOTH SIDES
PICTURED
LOT 535
Jan Gwinnell Signed Factory Engraved Colt
Third Generation Single Action Army Revolver
with Buffalo Horn Grips, Factory Letter, and Box - Serial
no. S30307A, 45 LC cal., 4 3/4 inch round bbl., nickel finish,
horn grips. Manufactured in 2001, the included factory
letter confirms the current configuration including the class
“A” factory engraving executed by Colt Master Engraver
Jan Gwinnell, whose signature is on the right side of the
front strap, as well as the buffalo horn grips with silver Colt
medallions and shipment to J & J Custom
Firearms in Columbus, Indiana on 18 February
2001. Also included is the original shipping
sleeve and Colt blue box.
CONDITION: Excellent, retains 99% plus original
nickel finish with only the slightest handling
marks. The grips are very fine with a few age
related hairline cracks and otherwise minimal
handling evidence. Mechanically excellent. The boxes are very fine with some
light handling/storage wear.
Estimate: 3000 - 4000
369

LOT 536
Factory Class “D” Engraved Colt Single Action Army Revolver with Case - Serial no. 93891SA, 45 LC cal., 7 1/2 inch
round bbl., blue/casehardened finish, hard rubber grips. Manufactured in 1978, this revolver features Class “D” factory
engraving. With the exception of part of the front strap, the revolver has complete coverage of floral scroll engraving
with a leaf pattern in the cylinder flutes. The top of the barrel is marked with the one line address, the left side is
marked “COLT SINGLE ACTION ARMY .45” and the left side of the frame is marked with the two-line, three patent date
marking in a banner followed by the Rampant Colt. The matching serial number is marked on the bottom of the frame,
on the left side of the grip straps under the grip, and on the inside of each grip panel. The lower left side of the front
strap under the grip is marked “COLT ENG”. Blade front and frame notch rear sights, casehardened frame with blue on
the remaining surfaces, with polished hammer sides and fitted with checkered hard rubber Rampant Colt/American
eagle relief grips. Complete in a Colt brown leatherette case with gold lining.
CONDITION: Near new with only slight storage marks. Case is very good exhibiting exterior deterioration from storage.
Estimate: 3500 - 4750
LOT 538
T. W. Freyburger Signed Factory Engraved Colt
Third Generation Single Action Army Revolver with
Stag Grips and Box - Serial no. S07017A, 44-40 cal.,
4 3/4 inch round bbl., blue/casehardened finish, stag
grips. Manufactured in 1994 with standard markings as well as factory class “A” engraving executed by
Master Engraver T. W. Freyburger, who signed their work on the right side of the front strap, and fitted with
stag grips with gold Colt medallions. Includes the original shipping sleeve with Colt Custom Shop label
confirming the engraving and grips, and a Colt blue box.
CONDITION: Excellent overall, retains 99% plus original blue and casehardened finishes with only the
slightest handling marks. Mechanically excellent. The boxes are very good with minimal handling/storage
wear and some mild staining on the shipping sleeve.
Estimate: 3000 - 4000
370
LOT 537
Factory Class “C” Engraved Colt Single Action Army Revolver with Case
and Factory Letter - Serial no. SA48833, 45 Long Colt cal., 7 1/2 inch round bbl., blue/casehardened finish, plastic
grips. According to the included factory letter, this revolver with shipped to West Texas Wholesale Supply of Abilene,
Texas on June 11, 1982. The grip type and engraver name are both “Not Listed”, and all other features, including the
“C” engraving are confirmed. Fixed sights and standard markings on barrel, with one line address and “COLT SINGLE
ACTION ARMY .45” markings. Two line, three patent date marking on the left side of the frame, followed by the
Rampant Colt. Class “C” engraving covers 3/4 of the surface, showing fine scrollwork on all major parts. Checkered
plastic grips, with Rampant Colt and American Eagle designs. Matching numbers on the loading gate, grips and grip
straps, with “COLT ENG” under the left panel. Complete with a brown leatherette Colt Presentation case.
CONDITION: Near new, with some minor handling marks overall. Mechanically excellent. The case is good.
Estimate: 2750 - 4250
LOT 539
Factory Engraved Colt Third Generation Single Action Army
Revolver with Case - Serial no. 94039SA, 45 LC cal., 7 1/2 inch round
bbl., blue/casehardened finish, plastic grips. Manufactured in 1978 with
standard markings and features along with factory class “A” engraving and fitted with checkered plastic
grips with Colt medallions. Grip frame marked “COLT ENG”. Includes a Colt Custom Shop leatherette case.
CONDITION: Excellent, retains 99% plus original blue and casehardened finishes with very faint traces of
a cylinder drag line. The slightly ill-fitting grips are fine with sharp checkering. Mechanically excellent. The
case is very fine with some light handling/storage marks.
Estimate: 2500 - 3500

The Next Two Pairs of Revolvers are
Consecutively Serial Numbered
LOT 540
Matched Pair of Colt Peacemaker
Centennial Single Action Army
Revolvers with Boxes -A) Colt Single
Action Army Revolver - Serial no.
MPC206, 45 LC cal., 7 1/2 inch round bbl.,
blue/casehardened finish, walnut grips.
One of 500 sets manufactured in 1973
with standard markings and features. Each
includes a Colt “wood grain” box hand
numbered to the gun. Both guns are
collector serialized “206”. Consecutively
serialized with another pair in the next lot.
CONDITION: Excellent overall, retaining
99% plus original finishes, limited
handling evidence, and a crisp cartouche.
The box is very good with some tears.
Mechanically excellent. B) Colt Frontier
Six Shooter Single Action Army
Revolver - Serial no. 206MPC, 44-40
cal., 7 1/2 inch round bbl., nickel finish,
plastic grips. Manufactured in 1973 with
standard markings and features.
CONDITION: Excellent overall, retaining 99% plus original nickel, minimal minor handling evidence, faint cylinder
drag lines, and sharp grip checkering. The box is very good with a minor tear and some minor wear.
Mechanically excellent.
Estimate: 2250 - 3750
LOT 541
Matched Pair of Colt Peacemaker
Centennial Single Action Army Revolvers
-A) Colt Single Action Army Revolver - Serial no. MPC207,
45 LC cal., 7 1/2 inch
round bbl., blue/
casehardened
finish, walnut grips. One of 500
sets manufactured in 1973 with standard markings
and features. Both guns are collector serialized “207”.
Consecutively serialized with another pair in the previous lot.
CONDITION: Excellent overall, retaining 99% original finish,
limited handling evidence, some oxidation on the sides of the hammer,
and a crisp cartouche. Mechanically excellent. B) Colt Frontier Six Shooter Single Action Army
Revolver - Serial no. 207MPC, 44-40 cal., 7 1/2 inch round bbl., nickel finish, hard rubber grips.
Manufactured in 1973 with standard markings and features.
CONDITION: Excellent overall, retaining 99% plus original nickel, limited handling evidence, faint cylinder drag
line in areas, and sharp grip checkering. Mechanically excellent.
Estimate: 2250 - 3750
LOT 542
Colt Second Generation Single Action Army
Revolver with Factory Letter - Serial no. 1344SA, 45 LC cal., 5
1/2 inch round bbl., blue/casehardened finish, plastic grips. The included factory
letter confirms the current barrel length, caliber, and finish when it was shipped to
Olympic Wholesale Company of Los Angeles, CA, on February 28, 1956 in
a five gun shipment.
CONDITION: Excellent, retaining 98% original blue and casehardened finishes with
some light handling evidence. The grips are very fine with a very slight gap at the
bottom left panel and sharp checkering. Mechanically excellent.
Estimate: 1800 - 2750
Collector’s Fact
According to Wilkerson’s
The Post-War Colt-Single Action Revolver,
this is one of only 503 Sheriff ’s Models
manufactured.
LOT 543
Rare Colt
Second
Generation Sheriff’s
Model Single Action
Army Revolver with Factory
Letter - Serial no. 0121SM, 45
LC cal., 3 inch round bbl., blue/
casehardened finish, walnut grips.
The accompanying factory letter lists this revolver with a 3 inch barrel in .45 Colt, blue
finish and type of stocks not listed when shipped to Centennial Arms Corp. of Chicago,
Illinois on October 13, 1960. Standard markings and features of the rare Second Generation Sheriff’s Model
Revolver. One of only 503 total production, numbered in their own range, 0001SM to 0503SM.
CONDITION: Excellent overall, retaining 99% original blue and casehardened finishes, faint cylinder drag line, and
a few minor storage type marks. Mechanically excellent.
Estimate: 2500 - 3750
LOT 544
Colt Third Generation Single
Action Army Revolver with
Box - Serial no. S10413A, 45
LC cal., 7 1/2 inch round bbl.,
nickel finish, smooth grips.
Manufactured in 1995. Standard
markings and features other
than the grips. Includes original
shipping box (label confirms
grips) and a Colt blue box.
CONDITION: Excellent, retaining
99% plus original nickel finish
with limited handling evidence. The grips are also excellent with an attractive grain as very slightly undersized.
Mechanically excellent. The shipping box is very fine and the blue box is excellent with some minor wear.
Estimate: 1500 - 2500
LOT 545
Cased Matching Pair
of Consecutively Serial
Numbered First Year
Production Colt Second
Generation Single Action
Army Revolvers
-A) Second Generation Colt
Single Action Army Revolver
- Serial no. 4615SA, 45 LC cal.,
5 1/2 inch round bbl., blue/
casehardened finish, hard rubber
grips. Manufactured in 1956. Matching serial and assembly
numbers, including the inside of each grip panel. Blue finish
with casehardened frame. Checkered hard rubber grips with
the Rampant Colt at the top. Comes in custom alligator skin
hard case housing both revolvers with green felt lining with
the lid having a brass plaque inscribed “COLT SA ARMY 45
CAL 4615 SA-4616 SA”.
CONDITION: Excellent. The revolver retains 97% original blue finish with some light edge wear and handling
marks on the grip straps and a light drag line on the cylinder. 97% original bright case colors on the frame with
thinning to a smooth gray on the recoil shield. The grips are excellent with sharps checkering and the left panel
is fading to brown. The case is fine with some edge wear on the exterior, and some minor wear and staining on
the lining. B) Second Generation Colt Single Action Army Revolver - Serial no. 4616SA, 45 LC cal., 5 1/2 inch
round bbl., blue/casehardened finish, hard rubber grips. Described in “A”.
CONDITION: Excellent. The revolver retains 95% plus original blue finish with light edge wear, and handling marks
on the grip straps, most apparent on the back strap. The frame retains 98% original bright case colors with some
fading a smooth gray on the recoil shield. The inside of the left grip panel had one number with a line through it
and the correct number added. It is possible that both markings were done at the factory. The grips are excellent
with the left panel having faded slightly. Overall the grips show light handling marks and sharp checkering.
Estimate: 3500 - 5500
The John Fox Collection
371

Elaborate Engraved & Gold Inlaid Matched Pair of Texas Shipped Colt Python Revolvers -
Attributed to Houston Celebrity & Race Car Driver Jesse “Ebb” Rose
372
LOT 546
Historic
Documented
Texas Shipped,
Exceptional Matched Engraved and Gold Inlaid Pair of Colt Python Double
Action Revolvers Attributed to U.S.A.C. Race Driver, and Houston Celebrity
Jesse “Ebb” Rose with Factory Letters -A) Colt Python Double Action Revolver - Serial
no. E29657, 357 magnum cal., 2 1/2 inch vent rib bbl., blue finish, carved grips. The included factory letter confirms the model,
serial number, caliber, barrel length, and July 1, 1971 date of shipment to Oshman Sporting Goods Company of Houston, Texas
as one of two firearms shipped. This highly attractive, highly embellished matched pair is attributed to U.S.A.C. driver, and all
around Houston celebrity Jesse “Ebb” Rose. Rose participated in six Indianapolis 500 races between 1960 and 1967, finishing
in 23rd in 1961, and 14th in both 1962 and 1963. The included papers, including correspondence from Rose’s daughter states
he was also a Texas Ranger, Harris County Sheriff’s Deputy, pilot, and trucking company owner. Jesse “Ebb” Rose
passed away August 27, 2007 in Houston, Texas. The revolvers feature full coverage flowing scroll engraving with
gold inlaid bands a the muzzle, gold inlaid snakes on either side of the barrel, “PYTHON .357” in flush gold inlay, Jesse “Ebb” Rose
“SNAKE” on left side of frame “EBB/ROSE” on each of the cylinder flats, gold inlaid sighting lines on top of the frame
and barrel, gold inlaid image of the state of Texas on left side of frame and relief carved gold inlaid rose (matches
the rose design seen on Ebb’s race car. The engraving is unsigned, however the level of workmanship and copious
gold inlays certainly indicate the skills of a master. Grips feature detailed carved roses on the left and right panels
respectively. Includes two signed photographs of Ebb Rose in his race car.
CONDITION: Exceptionally fine as professionally custom embellished with 99% of the blue finish remaining,
sharp engraving, some light handling marks, and exceptional raised relief gold inlays. The grips are very fine with
some small scratches. Mechanically excellent. B) Colt Python Double Action Revolver - Serial no. E45024,
357 magnum cal., 2 1/2 inch vent rib bbl., blue/gold inlaid finish, carved grips. The included factory letter
confirms the model, serial number, caliber, barrel length, blue finish, and August 22, 1972 date of shipment
to Sporting Goods Inc. of Houston, Texas as one of five firearms shipped. As described in “A”.
CONDITION: Exceptionally fine as professionally custom embellished with 99% blue finish remaining, sharp engraving, exceptional raised relief gold inlays and
light handling marks.
Estimate: 15000 - 25000

LOT 547
Desirable Matched Set of Colt
Python Snake Eyes Double Action
Revolvers with Boxes, Display Case,
and Factory Letter - Serial no. 404EYES,
357 magnum cal., 2 1/2 inch vent rib
bbl., stainless steel finish, plastic grips.
Manufactured in a limited run of 500
sets. Serrated, pinned ramp blade front sight with an orange insert
and a fully adjustable rear sight. The left side of the barrel is marked
Collector’s Fact
This is 1 of a limited
run of 500 sets.
“SNAKE EYES” with a decorative design on each side. The matching serial
numbers of “404EYES” and “EYES404” are stamped on the butt. The trigger
and cylinder release are serrated, and the hammer is checkered. The
Rampant Colt logo is stamped on the left side plate. With smooth grips
with two dice scrimshawed on the left panel with “snake eyes” up and
a royal flush poker hand on the right panel. The included factory letter
confirms this configuration, case, and accoutrements, when the set was
shipped to Ellett Brothers Inc. of Chapin, South Carolina on February 8,
1989. Includes original factory boxes, two decks of “Snake Eyes” playing cards,
two extra dice for the display case, and shipping box for case.
CONDITION: Excellent overall with 99% original finish, very slight darkening/
flash marks of the cylinder face, and light cylinder drag line. Grips are also
excellent with light handling marks. Mechanically excellent. Case is very good
with some exterior scratches and dings. Box is very good with corner and edge
wear. B) Blue Colt Python Snake Eyes Edition Double Action Revolver -
Serial no. EYES404, 357 magnum cal., 2 1/2 inch vent rib bbl., blue finish, plastic
grips. As “A” in blue finish.
CONDITION: Near new in box with only the slightest handling marks. Box is
good with corner and edge wear.
Estimate: 14000 - 20000
LOT 548
Collector’s Set of
Three Colt Serpentine
Series Double Action
Revolvers with
Matching Collector
Issue Numbers
and Boxes
-A) Colt Serpentine
Series Anaconda
Revolver - Serial no.
SSA9425, 44 Magnum
cal., 6 inch vent rib
bbl., stainless steel
finish, rubber grips.
Manufactured in
1995. 1 of 50. Initially
produced as part of the
1994 Serpentine Series
which consisted of 50
three-gun sets which
included a Python, King
Cobra, and an Anaconda.
Standard markings along
with the “Serpentine
Series of 1994” roll mark
on the barrel and “1 OF
50” on the side plate.
The revolvers are fitted
with pinned ramp
blade front sights
with orange inserts,
fully adjustable rear
notch sights, wide
serrated hammers, wide
serrated triggers, and
serrated cylinder catches.
Fitted with textured finger
groove contoured grips.
Each includes a Colt picture
sleeve box numbered to
the gun, blue plastic Colt
case, and papers. All three
have the same main serial
number with
relevant prefixes.
CONDITION: Excellent with
99% original finish, light
handling marks, and small visible drag line and flash marking on
the cylinder. Mechanically excellent. Box is good with corner and
edge wear, and partially separated end flaps.
B) Colt Serpentine Series Python Double Action Revolver -
Serial no. SSP9425, 357 magnum cal., 6 inch vent rib bbl., stainless
steel finish, rubber grips. As described in “A”. Includes original box
and factory blue case.
CONDITION: Excellent with 99% original finish, light handling marks,
Collector’s Fact
Only 50 Serpentine
Sets were ever
manufactured.
mild flash marking, and small visible cylinder drag line. Mechanically excellent. Box is good with corner and
edge wear, and some small tears. C) Colt Serpentine Series King Cobra Double Action Revolver - Serial
no. SK9425, 357 magnum cal., 6 inch solid rib bbl., stainless steel finish, rubber grips. As described in “A”.
Includes original box (detached end label included) and blue factory case.
CONDITION: Excellent with 99% original finish, light handling marks, sme mild flash marking, and small
visible cylinder drag line. Mechanically excellent. Box is fair with corner and edge wear, and torn
and absent end flaps.
Estimate: 14000 - 22500
373

LOT 549
Rare Colt Boa Double Action Revolver
with Box - Serial no. BOA0813, 357
magnum cal., 4 inch vent rib bbl., blue
finish, walnut grips. Developed as a
combination of the Mark V Trooper frame
and the Python barrel, the Colt Boa was
manufactured only in 1985 as a Lew
Horton Distributing limited edition, with
a total run of only 1,200, with only 600
in this configuration, making it among
the rarest of the production model Colt
“snake” double actions. Blade front and
adjustable notch rear sights, with “BOA
.357/357 MAGNUM CTG.” on the left side of the barrel, and a pair
of checkered wraparound hardwood grips with Colt medallions.
Includes original Colt “wood grain” box.
CONDITION: Excellent overall, retaining 99% original blue, minor
handling evidence, a small scratch above the Rampant Colt on the
side plate, very faint cylinder drag line, and sharp grip checkering.
The box is fine with some wear on the edges ends.
Mechanically excellent.
Estimate: 11000 - 17000
Collector’s Fact
Only 600 Boas were
manufactured with
4” barrels.
LOT 550
Scarce
Electroless
Nickel
“Coltguard”
Colt Python
Double Action
Revolver with
Box, Factory
Letter, and
Desirable
2 1/2 Inch
Barrel - Serial
no. K69183, 357
magnum cal., 2 1/2 inch vent rib bbl., electroless nickel finish, rubber grips. The included Colt factory letter
confirms the current barrel length, caliber, and finish when if was shipped to Munson Sporting Goods
Company of Costa Mesa, CA, on January 25, 1982. Also includes original Colt “wood grain” box.
CONDITION: Excellent overall, retaining 99% plus original electroless nickel finish, limited handling
evidence, flash marking on the cylinder face, and well-defined grip texture. The box is fine with some light
wear and tears. Mechanically excellent.
Estimate: 5500 - 8500
LOT 552
Scarce Three Inch Barrel Colt Combat Python
Double Action Revolver with Box and Factory
Letter - Serial no. T74150, 357 magnum cal., 3 inch
vent rib bbl., blue finish, walnut grips. The included
Colt factory letter confirms the barrel length,
caliber, finish, and grips when it was shipped to
Lew Horton Distr. Co., Inc. of Southboro, MA, on
February 12, 1988 as 1 of 69 guns. The letter also
confirms the special barrel marking of “COMBAT
PYTHON”. This revolver is one of 500 specially made
for Lew Horton with the special barrel length and
marking. Includes the original Colt “Heritage” box.
CONDITION: Excellent overall, retaining 99%
original blue finish, minor handling evidence,
a spot of lost finish on the butt, faint cylinder
drag line, and sharp grip checkering. The box is
good with some moderate wear and a few tears
in the corners. Mechanically excellent.
Estimate: 8000 - 13000
LOT 553
Colt Viper Double Action Revolver - Serial no.
88837M, 38 special cal., 4 inch solid
rib bbl., blue finish, walnut grips.
Manufactured in 1977. Standard
markings and features. Includes a
reproduction Colt “wood grain” box
numbered to another gun and an
extra blank Viper end label.
CONDITION: Very fine overall,
retaining 98% plus original blue, a
ding on the rear right of the frame,
some wear at the muzzle, faint
cylinder drag line, and a few scratches
on the grips which have sharp
checkering. The reproduction box
is very fine with minor edge wear.
The barrel is slightly over tightened,
otherwise mechanically excellent.
Estimate: 5000 - 7000
Collector’s Fact
This is 1 of only 500
manufactured in this
configuration.
374
LOT 551
Colt Python Silhouette Double Action Revolver with Scope
and Case - Serial no. K49372, 357 magnum cal., 8 inch vent rib bbl.,
blue finish, rubber grips. Manufactured in 1981. Standard markings and
features. Includes a Colt/Leupold M8-2X Extended E.R. scope, aluminum
hard case, and Colt cleaning accessories.
CONDITION: Excellent overall, retaining 99% original blue, minor handling
evidence, light cylinder drag line, and sharp grip checkering. The case and
accessories are excellent. Scope optics sharp. Mechanically excellent.
Estimate: 4000 - 6000
LOT 554
Lew Horton
Edition Colt
Python
Double Action
Revolver with
Desirable
Ported Barrel
Case and
Factory Letter - Serial no. PN13507,
357 magnum cal., 4 inch ported vent rib bbl., stainless finish, rubber grips. The included Colt factory letter confirms
the current barrel length, caliber, finish, and barrel porting when it was shipped to Lew Horton Distr. Company, Inc. of
Westboro, MA, on December 21, 1996 as part of a 55 gun shipment. Also includes the original Colt hard case.
CONDITION: Excellent overall, showing minor handling evidence, light cylinder drag line, and a few small marks on the
grip. Mechanically excellent.
Estimate: 4500 - 6000

LOT 555
Colt Python Elite
Double Action
Revolver with Case
and Factory Letter
- Serial no. PN13610,
357 magnum cal.,
6 inch vent rib bbl.,
stainless finish,
laminated grips. The
included factory
letter confirms the caliber, barrel length, and finish when it was shipped to
Nationwide Sports Dist. Leslie Edelman Inc. of Southhampton, PA, on April
16, 1997. Based on the serial number, this may be the first commercial
production Python Elite manufactured in 1997. Includes original Colt
plastic case.
CONDITION: Excellent overall, showing minor handling evidence some
light scratches, a light cylinder drag line, and some flash marking.
Mechanically excellent.
Estimate: 3500 - 5500
LOT 556
Desirable Nickel
Colt Python Double
Action Revolver
with Box - Serial no.
VA2589, 357 magnum
cal., 8 inch vent rib bbl.,
nickel finish, walnut grips. Manufactured in 1980. Standard markings and
features. Includes original Colt “wood grain” box numbered to gun, and
with manual and “The Colt Companion” pamphlet.
CONDITION: Very fine, retaining 98% original nickel, minor handling
evidence, a few tiny areas of spotting, dark flash marks on the front
cylinder face, and faint cylinder drag line. The ill-fitting grips are very good
with sharp checkering. The box is fair with some tears and a missing end
flap, but retains the end flap with the factory label confirming the gun’s
serial number and configuration. Mechanically excellent.
Estimate: 3000 - 4500
LOT 557
Colt Python Double
Action Revolver with
Boxes - Serial no.
K59042, 357 magnum
cal., 8 inch vent rib
bbl., blue finish, walnut
grips. Manufactured in 1981. Standard markings and features. Includes an
unlabelled Colt “wood grain” box and a reproduction box.
CONDITION: Excellent overall, retaining 97% original blue, light handling
evidence, some scattered scratches, several nicks on the rib, and sharp grip
checkering. The Colt box is poor with no end flaps and the reproduction
box is excellent. Mechanically excellent.
Estimate: 2750 - 3750
LOT 558
Colt Python Double Action
Revolver with Box - Serial no.
V49025, 357 magnum cal., 4
inch vent rib bbl., blue finish,
walnut grips. Manufactured in
1979. Standard markings and
features. Includes original Colt
“wood grain” box.
CONDITION: Excellent overall, retaining 99% plus original blue, minor
handling evidence, faint cylinder drag line, and sharp grip checkering. The
box is good with some light wear and some tears. Mechanically excellent.
Estimate: 2750 - 3750
LOT 559
Scarce Electroless Nickel
Colt Python Double Action
Revolver with Box - Serial no.
K59441, 357 magnum cal., 8
inch vent rib bbl., electroless
nickel finish, rubber grips.
Manufactured in 1981. Standard markings and features other than the finish.
Includes original Colt “wood grain” box.
CONDITION: Excellent overall, retaining 99% plus original electroless nickel
finish, limited handling evidence, faint cylinder drag line, some cylinder flash
marking, and sharp grip checkering. The box is very fine with some minor wear
and tears. Mechanically excellent.
Estimate: 4000 - 6000
LOT 560
Desirable Nickel Colt
Python Target Double Action Revolver - Serial no.
K02043, 38 special cal., 8 inch vent rib bbl., nickel finish,
walnut grips. Manufactured in 1980. Standard markings and
features. Includes an unlabelled Colt “wood grain” box.
CONDITION: Excellent, retaining 99% plus original nickel with minor
handling evidence and faint cylinder drag line. The grips are very good with
some dings and scratches and sharp checkering. The box is poor with extensive
damage and tape repair. Mechanically excellent.
Estimate: 3500 - 5500
LOT 561
Colt Team
Realtree
Anaconda
Double
Action
Revolver with
Scope and
Box - Serial
no. MM85907,
44 Magnum
cal., 8 inch
vent rib bbl.,
camouflage
finish, rubber
grips. Standard
markings and features. Includes the original Redfield EER 2 1/2-7x scope,
original box, and Colt-Realtree soft case.
CONDITION: Excellent overall with 98% original camo finish remaining, some
traces of a light drag line on the cylinder, and minor discoloration/flash marks
on the cylinder face. Mechanically excellent. Scope is excellent with clear
optics. Box is good with corner and edge wear, case is excellent.
Estimate: 2000 - 3000
LOT 562
Colt Anaconda Double
Action Revolver with
Case - Serial no. MM86719,
44 Magnum cal., 4 inch
vent rib bbl., stainless
finish, walnut grips.
Manufactured in 1996.
Standard markings and
features. Includes an unlabelled Colt plastic case.
CONDITION: Excellent overall, showing limited handling evidence, traces of
a cylinder drag line, and sharp grip checkering. Mechanically needs work as
trigger occasionally hangs up.
Estimate: 1600 - 2500
LOT 563
Desirable
Nickel Colt
Diamondback
Double Action
Revolver with
Box - Serial no.
P54067, 22 LR
cal., 6 inch vent
rib bbl., nickel finish, walnut grips. Manufactured in 1982/83. Standard
markings and features. Includes original Colt “wood grain” box.
CONDITION: Excellent overall, retaining 99% plus original nickel finish,
limited handling evidence, and sharp grip checkering. The box is fine
with some minor corner/edge wear. Mechanically excellent.
Estimate: 2000 - 3500
LOT 564
Colt Anaconda
Double Action
Revolver with
Case - Serial
no. MM98628,
44 Magnum
cal., 6 inch
vent rib bbl.,
stainless finish,
rubber grips.
Manufactured in 1997. Standard markings and features. Includes
original Colt plastic case.
CONDITION: Excellent overall, showing minor handling evidence, light
cylinder drag line, and well-defined grips checkering. Mechanically
excellent.
Estimate: 1600 - 2500
LOT 565
Colt Diamondback
Double Action Revolver
with Box - Serial no.
R29401, 22 LR cal., 4 inch
vent rib bbl., blue finish,
walnut grips. Standard
markings and features.
Includes original Colt “wood grain” box.
CONDITION: Excellent, retaining 99% original blue, light handling
evidence, some mild flash marking, and a few scratches above the
crane. The grips are fine with some edge wear, a number of small
dents on the bottom left panel, freshened varnish on the bottoms,
and sharp checkering. The box is very good with some tape repairs.
Mechanically excellent.
Estimate: 1600 - 2500
LOT 566
Colt King Cobra
Double Action
Revolver with
Case - Serial
no. KK5544, 357
magnum cal.,
4 inch solid rib
bbl., stainless
finish, rubber
grips. Manufactured in 1991. Standard markings and features. Includes
an unlabelled Colt plastic case.
CONDITION: Excellent overall, showing light handling evidence, some
light muzzle wear, cylinder drag line, flash marking on the cylinder
face, and sharp grip checkering. Mechanically excellent.
Estimate: 1400 - 1900
375

376
LOT 567
Colt Python
Double Action
Revolver with
Box - Serial
no. E2211, 357
magnum cal.,
4 inch vent rib
bbl., blue finish,
walnut grips.
Manufactured
in 1969. Standard markings and features. Includes original Colt “wood
grain” box.
CONDITION: Excellent overall, retaining 99% plus original blue, limited
handling evidence, faint cylinder drag line, flash marking on the
cylinder face, and sharp grip checkering. Mechanically excellent.
Estimate: 2250 - 3500
LOT 568
Desirable
Nickel Colt
Python
Double Action
Revolver with
Box - Serial no.
V52756, 357
magnum cal.,
6 inch vent
rib bbl., nickel
finish, walnut grips. Manufactured in 1979. Standard markings and
features. Includes original box.
CONDITION: Near new in box with only light handling marks. Box is
about good with some corner and edge wear, and some visible tears.
Estimate: 2500 - 3500
LOT 569
Colt Python Double Action
Revolver with Desirable 2 1/2 Inch
Barrel - Serial no. 53906E, 357 magnum cal.,
2 1/2 inch vent rib bbl., blue finish, rubber grips.
Manufactured in 1977. Standard markings and
features. With Colt medallion Pachmayr grips.
CONDITION: Excellent with 99% original blue finish
remaining, some light handling marks, and faintly
visible cylinder drag line. Shows evidence of having been fired.
Mechanically excellent.
Estimate: 2250 - 3500
LOT 570
Colt
Diamondback
Double
Action .22 LR
Revolver with
Box - Serial
no. D92275, 22
LR cal., 4 inch
vent rib bbl., blue finish, walnut grips. Manufactured in 1976. Standard
markings and features. Includes original box.
CONDITION: Near new in box with only light handling marks. Box is
good with some corner and edge wear, partially separated flaps,
and fading.
Estimate: 1400 - 2250
LOT 571
Florida
Highway
Patrol Marked
Colt Python
Double Action
Revolver
with Factory
Letter - Serial
no. T33540, 357
magnum cal., 4 inch vent
rib bbl., bright stainless
finish, laminated grips. The included factory letter
confirms the caliber, barrel length, and finish when
the revolver was shipped to the Dept. of Highway
Safety & Motor Vehicles of Tallahassee, FL, on December 22, 1984. This revolver was
one of 50 sent to the Florida Highway Patrol and is marked “FHP 2166” on the butt. The
remaining guns where marked “FHP 1” - “FHP 10” and “FHP 2128” - “FHP 2168”. Includes
an unlabelled Colt case.
CONDITION: Excellent overall, showing limited handling evidence and sharp carving
on the grips. Mechanically excellent.
Estimate: 3000 - 5000
LOT 572
Desirable Nickel Colt Python
Double Action Revolver with
Box - Serial no. 70694E, 357
magnum cal., 6 inch vent rib
bbl., nickel finish, walnut grips.
Manufactured in 1977. Standard
markings and features. Includes
factory box with non-matching
end label.
CONDITION: Excellent overall with 99% bright original nickel finish, some mild
discoloration on the cylinder face, faint cylinder drag line, and sharp checkering on the
grips. Mechanically excellent. Box is good with some corner and edge wear, and some
separated edges.
Estimate: 2500 - 3500 LOT 577
LOT 573
Colt Python Double Action
Revolver with Box - Serial no.
E88019, 357 magnum cal., 4 inch
vent rib bbl., blue finish, walnut grips.
Manufactured in 1975. Standard
markings and features. Includes
factory box hand numbered
to the gun.
CONDITION: Excellent with 98% plus original blue finish remaining, light handling
marks, visible light cylinder drag line, and some discoloration and cleaning scratches
on the cylinder face. Grips are also excellent with sharp checkering and a few small
scattered dings. Mechanically excellent. Box is good with some corner and edge wear,
and absent label.
Estimate: 1700 - 2750
LOT 574
Colt Diamondback Double
Action Revolver with Box - Serial
no. R29716, 22 LR cal., 4 inch vent
rib bbl., blue finish, walnut grips.
Manufactured in 1986. Standard
markings and features. Includes
original box.
CONDITION: Near new in box with only light scattered handling marks and a very faint
cylinder drag line. Box is good with corner and edge wear, and fading.
Estimate: 1400 - 2250
LOT 575
Desirable
Nickel Colt
Python
Double
Action
Revolver
with Box -
Serial no.
52742E, 357
magnum
cal., 6 inch vent rib bbl., nickel finish, walnut grips. Manufactured in
1977. Standard markings and features. Includes original box.
CONDITION: Near new in box with only light handling marks. Box is
very good with some corner and edge wear.
Estimate: 2500 - 3500
LOT 576
Colt Python
Double
Action
Revolver with
Box - Serial
no. E19483,
357 magnum
cal., 6 inch
vent rib bbl.,
blue finish, walnut grips. Manufactured in 1970. Standard markings
and features. Includes original Colt two-piece “wood grain” box
numbered to the gun and with “Handling the Handgun pamphlet
and warranty card.
CONDITION: Excellent, retaining 99% plus original finish,
limited handling evidence, faint cylinder drag line, and sharp
grip checkering. The box is very fine with minor edge wear.
Mechanically excellent.
Estimate: 2250 - 3500
Colt Python
Double
Action
Revolver
with Box -
Serial no.
35187E, 357
magnum cal.,
6 inch vent
rib bbl., blue finish, walnut grips. Manufactured in 1976. Standard
markings and features. Includes original box.
CONDITION: Excellent overall with 99% original blue finish,
scattered light handling marks, very faint cylinder drag line, and
sharp checkering on the grips. Mechanically excellent. Box is good
with some corner and edge wear, and some small tears on the
end flaps.
Estimate: 1500 - 2500
LOT 578
Colt Diamondback Double Action
Revolver - Serial no. R22094, 22 LR
cal., 4 inch vent rib bbl., blue finish, walnut
grips. Manufactured in 1986. Standard
markings and features.
CONDITION: Excellent with 99% original blue finish,
light handling marks, and a faintly visible cylinder drag line.
Grips are also excellent with sharp checkering.
Mechanically excellent.
Estimate: 1400 - 2250

LOT 579
Very Rare Smith & Wesson Model
52-A 38 AMU Semi-Automatic
Pistol with Factory Letter - Serial
no. 35895, 38 AMU cal., 4 inch round bbl., blue
finish, walnut grips. Manufactured from 1961-1964
expressly for the U.S. Army Marksmanship Unit
(AMU). It is chambered in the .38 AMU cartridge,
which was developed by the AMU armorers of
Fort Benning, Georgia for the unit. Only 87 of the
pistols were produced, all of which fall in the serial
number range 35850-35927. It is rumored that the
low production is due to the aluminum frames
being unable to hold up to long term firing, because
of this they were released to the public. The barrel
bears the non-standard “38 A.M.U. CTG.” and “52A” markings with otherwise
standard Model 52 markings. The accompanying factory letter lists this pistol
as a Model 52-A with 4 inch barrel, blue finish and checkered walnut grips
when shipped on June 4, 1964 and delivered to Camfour Inc., Westfield, MA.
Comes with a copy of the S&W invoice showing a cost of $52.25 when it was
shipped to Camfour Inc. in 1964.
CONDITION: Excellent overall, retaining 99% plus original blue finish, limited
handling evidence, and sharp grip checkering. Mechanically excellent.
Provenance: Dr. Gerald Klaz collection.
Estimate: 4000 - 6000
LOT 580
Rare
Factory
“Class
A” Engraved Smith & Wesson 125th
Anniversary Commemorative Double
Action Revolver with Box - Serial
no. S&W0290, 45 Colt cal., 6 1/2 inch
solid rib bbl., blue finish, smooth grips.
Manufactured in 1977. One of 50 factory “Class A” floral scroll engraved 125th
Anniversary Models. Includes original box confirming engraving on the end
label with papers.
CONDITION: Excellent overall, retaining 99% plus original blue with limited
handling evidence. The box is very fine with minor wear.
Mechanically excellent.
Estimate: 2500 - 4000
LOT 581
Factory “Class A” Engraved
Smith & Wesson Model 39-2
Semi-Automatic Pistol with
Box - Serial no. A415065, 9x19mm
cal., 4 inch round bbl., nickel finish,
walnut grips. Manufactured in
1977/78. Factory “Class A” floral
scroll engraving on a punch dot
background and smooth Goncalo
Alves presentation grips. Includes
original silver box confirming engraving,
tools, and an extra magazine.
CONDITION: Excellent, retaining 99% plus original nickel finish with limited
handling evidence. The grips are very fine with some crazing of the varnish.
The box is very fine with minor wear. Mechanically excellent.
Estimate: 2250 - 3500
LOT 582
Rare Smith & Wesson/Armament
Systems & Procedures Model
39-2 ASP Semi-Automatic
Pistol - Serial no. A720597,
9x19mm cal., 3 1/2 inch round
bbl., Teflon finish, Lexan grips.
Designed in the 1960s by
Paris Theodore and produced
through the 1970s, the ASP
package took a Model 39
and performed a radical
“remanufacturing”. Reduced in
multiple dimensions, rounded
edges, and a reshaped trigger guard. The
grips bear the “PATENTED” marking and
magazine is ported with windows for
round counting. Includes soft case, two
extra magazines, ASP advertisements,
and four magazines/publications with
ASP cover stories.
CONDITION: Very fine, showing 98%
Teflon finish, minor handling evidence,
some scratching on the grips, and clear
viewing port. Mechanically excellent.
Estimate: 3000 - 4500
LOT 583
Factory “Class A” Engraved
Smith & Wesson Model 59
Semi-Automatic Pistol with
Box - Serial no. A554693,
9x19mm cal., 4 inch round
bbl., nickel finish, plastic grips.
Manufactured in 1978/79.
Factory “Class A” floral scroll
engraving and black neoprene
grips. Includes original blue
box with end label confirming
engraving, extra magazine,
and factory tools.
CONDITION: Excellent overall,
retaining 99% plus original nickel,
limited handling evidence, and sharp grip checkering. The box is very fine
with light wear. Mechanically excellent.
Estimate: 2000 - 3000
LOT 584
Factory Engraved Smith & Wesson
Model 14-3 Double Action Revolver -
Serial no. 6K67074, 38 S&W special cal., 8 3/8
inch solid rib bbl., nickel finish, walnut grips.
Manufactured in 1974/75. About 75% coverage Factory scroll
engraving by Master Engraver Paul Piquette. Factory “R-N”
refinish mark on grip frame with rework stars on barrel and
cylinder, obviously factory engraved at the time of refinishing
with frame dated “12.80” for December 1980.
CONDITION: Excellent, retaining 99% of the factory reapplied nickel finish
with minor handling evidence. The grips are very fine with slightly worn
but well-defined checkering. Mechanically excellent.
Estimate: 1600 - 2500
LOT 585
Cased Factory Engraved and Gold Inlaid Smith & Wesson Model
41 50th Anniversary Commemorative Semi-Automatic Target
Pistol - Serial no. FYA0123, 22 LR cal., 5 1/2 inch slab sided bbl.,
blue/gold finish, walnut grips. Manufactured in 2007 with standard
markings and features. This pistol was a limited edition run of only 500.
Includes a glass top presentation case. Magazine absent..
CONDITION: Excellent overall, retaining 99% original blue, minor
handling evidence, slight discoloration to the matte blue, and sharp
grip checkering. The case is very fine. Mechanically excellent.
Estimate: 1800 - 2750
LOT 586
Smith & Wesson Pre-Model
39 Semi-Automatic Pistol with Case -
Serial no. 1767, 9x19mm cal., 4 1/8 inch
round bbl., blue finish, walnut grips. An early
variation with the steel slide and alloy frame found
in the first group of guns shipped which fall into the
1001-2600 serial number range. Includes a period factory
hardwood display case with pillowed blue satin lining
made specifically for S&W autos.
CONDITION: Excellent overall, retaining 97% plus original blue, minor
handling/use evidence, and sharp grip checkering. The magazine base
shows finish loss. The case is excellent. Mechanically excellent.
Estimate: 1800 - 2750
LOT 587
Engraved Smith & Wesson
Model 60 Double Action
Revolver with Box - Serial
no. R49531, 38 S&W special
cal., 2 inch solid rib bbl.,
stainless finish, hardwood
grips. Manufactured 1970-
1973. Near full coverage
floral scroll engraving on
a punch dot background.
Includes original box.
CONDITION: Excellent overall
as professionally embellished
showing limited handling evidence. The box is very good with
mild wear. Mechanically excellent.
Estimate: 1800 - 2750
The David Terbrueggen Collection
377

LOT 588
Rare and Desirable MBAssociates Experimental Mark I Model A Gyrojet Semi-
Automatic Carbine - Serial no. A0004, 13 mm Rocket cal., 16 inch irregular bbl., black
anodized finish, walnut stock. Designed as a carbine version of the MBA Mark I
Gyrojet Pistol and utilizing the same 13 mm solid fuel rocket ammunition. The
carbine has a vague resemblance to an AR type carbine with a high flat-top
front sight, fixed carry handle with Williams adjustable rear notch sight, full
aluminum construction, full length handguard, contoured pistol grip, and buttstock with smooth
plastic buttplate. The left side of the receiver is inscribed “EXPERIMENTAL/MARK I/GYROJET/
ROCKET/CARBINE” over the serial number. Like the pistol version, the magazine is fixed in the grip, and the hammer works in reverse, driving the
round backwards into a fixed firing pin. Includes leather sling. This carbine along with a Gyrojet pistol with the same serial number, lot 591, were both originally
shipped to a Dr. Robert D. Taylor who was friends with the heads of MBA. Dr. Taylor is listed as the owner of this carbine as well as the pistol in the Gyrojet
census on gyrojet.net.
CONDITION: Excellent, retains 99% plus original black anodized finish with some small scattered scratches. The fire controls have turned to a brassy/copper
patina. The wood is also excellent with a few small dings. Mechanically excellent.
Estimate: 3500 - 4750
LOT 589
MBAssociates
Mark I Model
B Gyrojet
Pistol with
Box - Serial no.
B5004, 13 mm
Rocket cal., 5
inch round bbl.,
black finish,
walnut grips.
A product of
the 1960s, the
Mark I Gyrojet
uses a miniature
solid fuel
rocket in place
of a standard cartridge. As the rocket does not need a solid
chamber or extractor equipment, the entire pistol can be
greatly simplified and made from lightweight materials.
Elevation adjustable blade front and fixed notch rear sights, a
sliding magazine cover, front-mounted hammer, model, caliber
and serial number markings on the left side, and a pair of
smooth grips. Includes an unnumbered factory box.
CONDITION: Very fine, retains 95% plus original black finish with
some high spots and handling areas having thinned slightly to
reveal a smooth grey patina. The grips are excellent with a few
light scratches on the left panel. Mechanically excellent. The
box is fine with some mild wear.
Estimate: 2000 - 3000
LOT 591
Rare and Desirable MBAssociates
Experimental Mark I Gyrojet Pistol
with Presentation Case - Serial no.
A0004, 13 mm Rocket cal., 5 inch round
bbl., black finish, walnut grips. A product
of the 1960s, the Mark I Gyrojet uses a
miniature solid fuel rocket in place of a
standard cartridge. As the rocket does
not need a solid chamber or extractor
equipment, the entire pistol can be greatly simplified
and made from lightweight materials. Fixed blade
front and notch rear sights, “EXPERIMENTAL/MARK
I” over the serial marked receiver, a magazine cover
mounted on the left side, front-mounted hammer,
and a pair of smooth grips. With a hardwood MBA
display case, Robert Hutchings Goddard medallion,
and ten dummy rounds of Gyrojet ammunition. This pistol along with a Gyrojet carbine with the same serial number,
lot 588, were both originally shipped to a Dr. Robert D. Taylor. An included letter from MBA details the shipment of this
pistol as well as Dr. Taylor’s friendship with the heads of MBA. Also included is a certificate of authenticity issued to Dr.
Taylor and stating this “is an experimental gun used in the research and development of the high-performance 13mm
Gyrojet Rocket handgun” and an extensive collection of documents pertaining to the development of Gyrojet firearms
including advertisements and correspondence relating to the pursuit of government contracts.
CONDITION: Excellent, retains 99% original black finish with a grey patina visible in the markings on the left of the
frame, and minimal handling marks. The fire controls have turned to a brass/copper patina. The grips are excellent
with only the slightest handling marks. Mechanically excellent. The case exterior is very fine with some scattered minor handling/storage marks and there is a
moderate rip in the lining of the lid with the interior plaque detached but included.
Estimate: 2500 - 4000
378
LOT 590
Scarce and
Desirable 13mm
Gyrojet Cartridges
- A plain box
containing 23 of
the scarce and
desirable 13mm
rocket cartridges for
the MBAssociates
Gyrojet line of arms.
A must have for any
Gyrojet collector!
CONDITION: The cartridges are very fine showing some mild wear
and age-related discoloration and the paper tape covered box is
very good with some light wear.
Estimate: 1400 - 2250
LOT 592
MBAssociates Mark I Model B Gyrojet Pistol with Presentation
Case - Serial no. B125, 13 mm Rocket cal., 5 inch round bbl., black
finish, walnut grips. A product of the 1960s, the Mark I Gyrojet uses
a miniature solid fuel rocket in place of a standard cartridge. As the
rocket does not need a solid chamber or extractor equipment, the
entire pistol can be greatly simplified and made from lightweight
materials. Elevation adjustable blade front and fixed notch rear
sights, a sliding magazine cover, front-mounted hammer, model,
caliber and serial number markings on the left side, and a pair of
smooth grips. With a hardwood MBA display case, ten dummy
rounds of Gyrojet ammunition, MBA pamphlet, and
operating instructions.
CONDITION: Very fine, retains 90% original black finish with some mild loss on
some edges and handling areas exposing a smooth grey patina. The grips are
excellent with a few light handling marks. Mechanically excellent. The case is very
fine with some scattered minor handling/storage marks.
Estimate: 1000 - 1600

LOT 593
Quantico Shipped
Colt M45A1
Semi-Automatic
Government
Model Pistol with
Case - Serial no.
09128EGA, 45 ACP
cal., 5 inch round
bbl., desert sand
finish, laminated
grips. Fixed three
dot Trijicon night
sights. The barrel is
a standard 5 inch
Colt National Match
.45 ACP barrel with a
stainless steel National Match bushing. The finish is a desert sand Cerakote. The frame features an integral
underbarrel rail, extended ambidextrous safety, extended beavertail grip safety, flat serrated mainspring
housing with lanyard loop, and a long solid aluminum trigger. Fitted with textured grips. With original bill
of sale addressed to the Marine Corps Exchange at Quantico, Virginia, matching Colt case,
and extra magazine.
CONDITION: Excellent overall. 99% plus original finish remains with only light handling marks and crisp
texture on the grips. Mechanically excellent. Case is excellent.
Estimate: 2250 - 3500
LOT 594
SIG Sauer P210-2 Semi-Automatic Pistol
with Box - Serial no. P306894, 9x19mm cal., 4
3/4 inch round bbl., blue finish, plastic grips.
Manufactured after 1966. Standard markings
and features. Includes correct box numbered
to the gun, a bill of sale from 1988, and
original test target.
CONDITION: Excellent overall, retaining
99% original blue, frame turned to a plum
appearance, small spot of oxidation on the
barrel, and sharp grip checkering. The box
is very good with some light wear to the
exterior and foam deterioration internally.
Mechanically excellent.
Estimate: 2250 - 3250
LOT 595
Colt Gold Cup National Match .38 Mid Range
Semi-Automatic Pistol with Factory Letter and
Box - Serial no. 2738-MR, 38 special mid range cal.,
5 inch round bbl., blue finish, walnut grips. The
included factory letter confirms the serial number,
caliber, barrel length, blue finish, stocks as “Not
Listed”, and March 29, 1961 date of shipment as a
single gun to Snepp and Fager of Kokomo, Indiana.
The letter states the pistol was shipped with an
arched mainspring housing, it is currently fitted
with a flat, serrated housing. Standard markings and
features. Includes unnumbered correct model
box and papers.
CONDITION: Very good. The left rear of the slide behind
the serrations has been refinished and shows light
thinning to an artificial patina. Otherwise 95% bright
original blue finish remains with some small scattered
scratches and handling marks. The grips are excellent
with some small scattered dings. Mechanically excellent.
Box is about fair with corner and edge wear, some tape
repaired corners, and scuffs and scratches overall.
Estimate: 1100 - 1600
LOT 596
Desirable SIG P210-6 Semi-Automatic Pistol with
Box - Serial no. P314456, 9 mm para cal., 4 1/2 inch round
bbl., matte blue finish, walnut grips. Fixed blade front and
rear notch sights, matching numbers on the barrel, slide,
and frame, and “SIG” maker’s mark” and “P 210-6” model
marking on the left side of slide. The slide is a polished
blue with a bead blasted blue frame, and bright finished
small parts. With checkered grips with lanyard loop on the
left side and heel magazine catch. With original SIG hinge
top blue box, two extra magazines, and loading tool.
CONDITION: Excellent with 99% original matte blue
finish, small bright line under the safety toggle, scattered
light handling marks and sharp checkering on the grips.
Mechanically excellent. Box is very good with noticeable
deterioration of the foam lining, corner and edge wear, and separated inner lid flap.
Estimate: 2250 - 3250
LOT 597
Colt Government Model
M45A1 NRA 1 of 50 Semi-
Automatic Pistol with
Case and Knife - Serial
no. 05759EGA, 45 ACP cal.,
5 inch round bbl., desert sand
finish, G10 grips. This is the Colt
Custom Shop civilian version of
the United States Marine Corps
Close Quarters Battle Pistol issued
to MARSOC, MEUSOC and Force
Recon units. Marked “NRA/46
of 50” on the right of the slide.
Includes a matching KA-BAR knife,
sheath, knife box, original Colt hard
case, and shipping box for the pair.
CONDITION: Excellent overall, retaining 99% original finish, some minor
handling evidence, and sharp grip texture. The knife is in equal condition. Mechanically excellent.
Estimate: 2000 - 3000
LOT 598
Attractive High Polished Whitney Firearms Wolverine Semi-
Automatic Pistol with Box - Serial no. 27753, 22 LR cal., 4 1/2
inch round bbl., bright polished finish, plastic grips. Manufactured
between 1955 and 1962 with a futuristic, space age design that
utilized a cast aluminum frame in lieu of the standard steel frames
of the day. It was a straight blow-back design that used a round
bolt inside the upper part of the frame with exposed cocking knobs
on the rear of the frame and an exposed hammer. With fixed front
and rear sights and standard markings and custom upgraded
expertly polished finish. Includes reproduction box and papers.
CONDITION: Exceptionally fine with 99% professional custom polished finish remaining, some light handling marks, and
crisp checkering on the grips. Mechanically excellent. Box is very fine with some very light storage marks.
Estimate: 1800 - 2750
LOT 599
Colt National Match .38 Special Mid Range Semi-Automatic
Pistol with Box - Serial no. 5551-MR, 38 special mid range cal., 5
inch round bbl., blue finish, walnut grips. Manufactured in 1966.
Standard markings and features. Includes unnumbered Colt Gold
Cup National Match box and extra magazine.
CONDITION: Excellent with 95% original blue finish, some scattered
light surface nicks and scratches, and some visible edge wear on
the right front of the slide. The grips are also excellent with sharp
checkering, and some scattered small dings. Mechanically excellent.
Box is good with corner and edge wear, and separated
corner on the lid.
Provenance: The Corner Stone Collection.
Estimate: 1100 - 1600
The Corner Stone Collection
379

BOTH SIDES PICTURED
LOT 600
Barrett M82A1 Semi-Automatic .50 BMG Sniper Rifle with Scope, BORS
System and Case - Serial no. 24280, 50 BMG cal., 29 inch heavy fluted bbl.,
phosphate finish, metal stock. Developed in the early 1980s the M82 series of weapons has been adopted by a number of military forces, where its
long range striking power makes it useful for disabling vehicles, detonating enemy ordnance and sniping at ranges well beyond a conventional rifle.
With an A spring loaded folding blade front sight and a folding peep rear sight are integrated into the 23 3/4 inch top-mounted Picatinny rail with
Leupold scope and Barrett BORS ballistic computer. with a swiveling carry handle mounted at the “T38” position and the signature 2-chamber chevron muzzle brake
on the fluted barrel. The receiver is ported around the barrel, a folding bipod assembly, AR-15 style pistol grip and safety, and a thick recoil pad. With Pelican 1750 hard case, and cleaning tools. Also included is a Barrett labeled
ammunition can marked as containing 120 rounds .50 BMG XM33 ball ammunition (contains 92 rounds).
CONDITION: Excellent with 95% plus original phosphate finish, some light handling marks, and faint edge wear. Mechanically excellent. Scope is excellent with clear optics, BORS unit untested. Case is excellent with some exterior
storage marks.
Estimate: 6500 - 8500
LOT 601
PGM Precision/FN Herstal Ultima Ratio Intervention Bolt
Action Sniper Rifle with Case - Serial no. 0679, 308 Win cal., 24
inch heavy round bbl., black finish, aluminum stock. Designed and
manufactured by PGM Precision of France and distributed in the United States by FNMI. The
Ultima Ratio is a wholly purpose built anti-personnel sniper rifle featuring a free floating heavy weight stainless steel barrel
with finned aluminum heat sink shroud, threaded muzzle (for use with a suppressor), muzzle brake, machined aluminum receiver, steel bolt with triple
locking lugs that lock into the barrel extension, top mounted scope rail, adjustable folding bipod, textured Hogue grip, side folding adjustable buttstock, and
folding adjustable rear monopod. With fitted Pelican 1750 hard case, extra magazine, tools, and cleaning tools.
CONDITION: Excellent overall with 99% plus original matte black finish, and some scattered light handling marks. Mechanically excellent. Case is very good with
some exterior scuffs and storage marks.
Estimate: 3500 - 5500
LOT 602
Scarce Belgian Fabrique Nationale FAL 50.63 Semi-Automatic
Paratrooper Rifle - Serial no. S1596016, 7.62x51 Nato cal., 16 inch round
bbl., black finish, metal stock. Imported by HOWCO, and marketed mostly towards law enforcement. The 50.63 pattern features post front and two
leaf peep rear sights, short, ported muzzle brake, adjustable gas regulator, HOWCO import mark on right side of magazine well, standard FN/Gun
South address and serial number markings on right side of upper receiver, two position safety, smooth grip, and folding tubular buttstock.
CONDITION: Excellent with 98% original black finish, and some scattered small scratches and dings. The stock and grip set are also excellent with
some light handling marks. Mechanically excellent.
Estimate: 4500 - 6500
380
LOT 603
Scarce Pre-Ban Fabrique Nationale FNC Sporter Semi-Automatic
Rifle - Serial no. S012237, 5.56 mm cal., 16 inch round bbl., black finish,
metal stock. Introduced in 1979 with very few imported to the United
States. Standard sights with a ported muzzle brake and flip-up grenade sight. Stamped and
welded upper receiver with the standard FN/Herstal and import markings on the left side with a spring loaded dust cover on the right side. “S/1”
marked trigger group on the lower receiver. Combination vented metal and ribbed plastic handguard, sling mounts, two position gas regulator,
smooth plastic pistol grip, and folding tubular buttstock
CONDITION: Excellent with 95% original black finish, some scattered small dings and scratches, replacement muzzle brake, and some light wear on
the butt. The grip has some small scratches and dings. Mechanically excellent.
Estimate: 2500 - 4500

LOT 604
Izhevsk Arsenal Marked AK-74 Type Semi-
Automatic Rifle with Scopes and Accessories
- Serial no. 232, 5.45x39 mm cal., 23 inch round bbl.,
black finish, polymer stock. Fitted with a birdcage style flash hider, post front and tangent rear
sights, folding RPK style bipod, ribbed polymer forend, receiver dated “1992” with attached scope base, East German Zeiss
ZFK 4x25 scope, and textured polymer buttstock with vented recoil pad and canvas web sling. Includes a Belarusian UPO-2
scope and mount with canvas carrying case, East German scope case, cover, and accessories for the ZFK 4x25 scope, three
extra blue steel magazines, four mottled brown polymer RPK style magazines with stripper clips, laminated hardwood RPK
pattern buttstock and handguard set, extra checkered plastic grip, and extra polymer RPK pattern buttstock. Transliterated
original serial number: I232.
CONDITION: Excellent with 98% original matte black finish remaining, some scattered small surface scratches, traces of light edge wear, and small
bright line under the safety lever. Stock is excellent with light handling marks. Mechanically excellent. Scopes are excellent with clear optics, and
some small handling marks and scratches on the bases.
Estimate: 3750 - 5500
LOT 605
Poly Technologies AK-47S Legend Series Semi-Automatic Rifle with Extra Magazines and Accessories - Serial no.
P47-03931, 7.62x39 cal., 16 1/2 inch round bbl., blue finish, hardwood stock. Post front and tangent rear sights, threaded
muzzle, “386” and “KFS” markings on the machined receiver, smooth hardwood forearm, checkered pistol grip, and fixed hardwood buttstock. Matching numbers on the gas
cylinder, bolt carrier, and bolt. Includes original box, bayonet with sheath, Chinese drum magazine with canvas pouch, Russian magazine carrier, eight extra box magazines
(four total are Russian bakelite with Izhevsk “arrow” markings), canvas web sling, sight adjustment tools, the book “AK-47 The Grim Reaper”
by Frank Iannamico, DVD, and manual.
CONDITION: Excellent overall with 98% plus original blue finish, light handling marks, and small bright line visible under the safety lever. Grip and stock set are also
excellent with a few scattered dings. Mechanically excellent. Accessories are very good overall.
Estimate: 2750 - 3500
LOT 606
Pre-Ban Early Production Costa Mesa Armalite AR-180 Semi-Automatic Rifle - Serial no. S3835, 5.56 mm
cal., 18 inch round bbl., black finish, polymer stock. Manufactured by Armalite in Costa Mesa, California. This rifle uses a gas operated,
piston driven system similar to the FN/FAL rifles. Reliable and robust, intended as an improvement over the standard M-16 gas system. Post front and flip up peep rear sights,
three prong flash hider and bayonet lug with an ambidextrous safety selector. Ribbed and ventilated forearm, smooth pistol grip and original Armalite folding buttstock with
ribbed buttplate. Includes a canvas web sling, extra magazine, July 2018 edition of “Firearms News” with an article about the Armalite AR-180, original manual, and a copy of
“Armalite’s Other Black Rifle” article from the June 2014 issue of “Gun Digest”.
CONDITION: Excellent with 95% of the original black phosphate finish remaining, some small scattered scratches and nicks, and small traces of mild edge wear. The stock, grip, and
handguard have scattered small dings and scratches, but are otherwise very good. Mechanically excellent.
Estimate: 1400 - 2000
LOT 607
Colt Sporter Competition HBAR Semi-Automatic Rifle with Scope and Box - Serial no. CH015472, 223 cal., 20 inch round bbl.,
black finish, composite stock. Introduced in 1992 and featuring the heavier weight 1/9 twist ratio barrel, birdcage flash hider,
post front and adjustable two-leaf rear peep sights, A4 pattern rail-top upper with attached carry handle, scope
mount, and 4x28 scope, and standard markings on the lower receiver. With a round, ribbed and ventilated
handguard, standard checkered grip, and fixed buttstock with checkered trapdoor buttplate. Includes black nylon web sling,
original box, two extra magazines, and cleaning tools.
CONDITION: Excellent overall with 99% original matte black finish, and some scattered light
handling marks. Mechanically excellent. Scope is excellent with clear optics. Box is very good
with some minor storage wear, some visible peeling where packing tape has been removed.
Estimate: 1400 - 2000
LOT 608
IMI/Action Arms Uzi Model B Semi-Automatic Carbine with Conversion Barrel and Cases - Serial no. SA42044, 9
mm para cal., 16 inch round bbl., black finish, steel stock. Standard pin front and adjustable two-leaf rear peep sights,
knurled cocking piece, standard markings on the receiver, standard serrated forend and grip, and folding steel buttstock. Includes
a factory carbine case, four extra 9mm magazines, small tool, loading tool, black nylon web sling, .41 AE conversion barrel, two .41
AE magazines, two short dummy barrels, and separate factory case for the conversion barrel.
CONDITION: Excellent with 95% original black finish remaining, some small areas of visible edge wear, scattered small
dings and scratches, and folding marks on the stock. Forend and grip are also excellent with just a few small dings. Mechanically
excellent. Cases are excellent with some exterior dings and scuffs.
Estimate: 1300 - 1900
381

BOTH SIDES PICTURED
LOT 609
Izhmach Tiger Semi-
Automatic Sniper Rifle with Scope - Serial no. 38728, 7.62x54 R cal., 21 inch round bbl.,
black finish, laminated stock. Manufactured in Russia and imported by Century Arms of St. Albans,
Vermont. The Izhmach Tiger is a commercial post-ban version of the SVD Dragunov Rifle. Belarusian manufactured scope mounted on the rifle via the side rail. The right
side of the receiver is marked “TIGER/CAL 7.62X54/MADE IN RUSSIA BY IZHMACH/CAI. ST. ALB. VT” as well as the importation year “1994” and the serial number. Sans the
flash hider and fitted with the 300 meter rear sight. Fitted with a plastic forearm, and laminate thumbhole pistol grip stock with cheek pad and buttplate.
CONDITION: Excellent with 95% plus original matte black finish, some small scratches and dings, and handling marks. The stock set is also excellent with some small dings. Mechanically excellent. Scope is excellent with clear optics
and untested electronics.
Estimate: 4250 - 6500
LOT 610
Scarce Pre-Ban Fabrique Nationale FNC Sporter Semi-Automatic Rifle - Serial no. FN038239, 5.56
mm cal., 16 1/2 inch round bbl., black finish, metal stock. Introduced in 1979 with very few imported to the United States.
Standard sights with an integral rifle grenade launcher and flip-up grenade sight. Stamped and welded upper receiver with the standard FN/Herstal and import
markings on the left side with a spring loaded dust cover on the right side. “S/1” marked trigger group on the lower receiver. Combination vented metal and ribbed
plastic handguard, sling mounts, two position gas regulator, smooth plastic pistol grip, and folding tubular buttstock.
CONDITION: Excellent with 95% plus original black finish, scattered light handling marks and faint scratches, and some small dings on the butt. Mechanically excellent.
Estimate: 2500 - 4500
LOT 611
Desirable Pre-Ban Heckler & Koch HK91 Semi-Automatic Rifle - Serial no. A037272, 308 Win cal.,
18 inch round bbl., black finish, polymer stock. Manufactured in 1981 and imported through HK Inc. in
Arlington, Virginia. Standard markings and features.
CONDITION: Excellent overall with 99% original black finish, light handling marks, and some small dings around the magazine well. Mechanically excellent.
Estimate: 1800 - 2750
LOT 612
Poly Technologies AK-47S Semi-Automatic Rifle - Serial no. DF-04945, 7.62x39 cal., 16 1/2 inch round bbl., blue finish, steel stock. Post front and tangent
rear sights with milled receiver, hardwood forend and handguard, checkered grip, and folding steel buttstock. With canvas web sling.
CONDITION: Excellent with 95% original blue finish, some light oxidation around the gas tube, small scattered scratches, and some very light spotting on the
bolt and bolt carrier. The wood is very good with dings and scratches. Mechanically excellent.
Estimate: 1800 - 2750
LOT 613
Poly Technologies AK-47S Semi-Automatic Rifle with Bayonet and Box - Serial no. P47-06940, 7.62x39
cal., 16 1/2 inch round bbl., blue finish, hardwood stock. Post front and tangent rear sights, threaded muzzle,
“386/Keng’s” markings on the machined receiver, smooth hardwood forearm, checkered pistol grip, and fixed
hardwood buttstock. Matching numbers on the gas cylinder, bolt carrier, and bolt. With original box, canvas
web sling, two extra magazines, bayonet with sheath, and oil bottle.
CONDITION: Excellent with 95% original blue finish areas of some small scratches, minor spotting on rear sight, and handling marks throughout. The grip and
stock set are also excellent with some small scattered dings. Mechanically excellent. Box is fair with corner and edge wear, tape repairs, and staining.
Estimate: 1800 - 2750
382
LOT 614
Action Arms/I.M.I. Model 386 Galil Semi-Automatic Rifle with Box - Serial no. AAL-2077663, 223 Rem cal.,
16 inch round bbl., black finish, metal stock. Hooded post front and two leaf rear peep sights, flip up front and
rear night sights, standard receiver markings, ambidextrous safety levers, serrated forearm, smooth pistol grip,
and folding tubular buttstock with grooved cast metal butt. With matching hand numbered Action Arms box
and web sling.
CONDITION: Excellent with 95% plus original black and gray phosphate finish remains with some scattered
small scratches, and handling marks overall. Mechanically excellent. Box is fair with corner and edge wear, tape
repairs, and peeled areas.
Estimate: 1600 - 2500

LOT 615
SIG Sauer Desert Digital Camo Limited Edition Two Gun Combo with Pelican Case -A) SIG Sauer Model SIG556 Semi-
Automatic Rifle - Serial no. 56DC0004, 223 cal., 16 inch round bbl., camouflage finish, polymer stock. This limited edition set
consists of a matching numbered (individual model prefixes 56 and 26 respectively) SIG Sauer Model 556 and P226 Pistol in
Desert Digital camo. The full rifle finish is in Desert Digital camo with bird cage flash hider, flip up blade front and rear peep
sights, standard markings on the receiver, serrated pistol grip, and side folding, collapsible buttstock with rubber recoil pad.
Includes original factory, fitted (for the set) hard case with unattached brass plaque, and extra magazine.
CONDITION: Excellent overall with 99% original finish, and scattered light handling marks. Mechanically excellent. Case is
excellent with some minor storage marks. B) SIG Sauer P226 Desert Digital Series Semi-Automatic Pistol - Serial no.
26DC0004, 9 mm para cal., 4 1/2 inch round bbl., black/blue finish, polymer grips. Features fixed three-dot night sights,
standard markings, and desert digital camouflage textured grips. Includes two extra magazines. In shared matching numbered
factory fitted hard case.
CONDITION: Excellent overall. With 99% plus original matte black and blue finish, some scattered light handling marks, a hint
of cycling marks on the barrel chamber. Mechanically excellent.
Estimate: 4000 - 6000
LOT 616
Scarce Limited Production Remington M700/M40 U.S.M.C. “Scout Sniper Association” Commemorative Bolt Action Sniper
Rifle with Scope, Box, and Stock - Serial no. SSA0206, 308 Win cal., 24 inch round bbl.,
matte black finish, composite stock. This is a limited edition Remington M700/M40 “Scout
Sniper Association” Commemorative sniper rifle manufactured from 2005 to 2006. These were
limited edition rifles hand-built/assembled in the Remington custom rifle shop to ensure superior accuracy and
conformance to original Vietnam era M40 Sniper rifle specifications. These rifles were endorsed and authenticated by
the “USMC Scout/Sniper Association” as to their originality and were issued with a special “SSA” serial number prefix,
Certificate of Authentication and a large USMC Scout/Sniper Association brass commemorative medallion. With an
M40 pattern medium weight barrel, “U.S.” roll-marked and “clip-slotted” M40 pattern receiver. The receiver has been
fitted with Picatinny style scope bases on the receiver ring and bridge, with a Leupold Vari-X III 3.5-10x50 mm scope. The rifle is currently fitted with a H-S Precision composite pistol grip stock with Redhead padded
nylon sling. Includes original box, correct original M40 pattern walnut stock, green nylon web sling, brass medallion, certificate of authenticity, and Plano Bone Collector hard case.
CONDITION: Excellent with 95% plus original matte finish, scattered light handling marks, and some small surface scratches on the barrel. Stock is excellent. Mechanically excellent. Scope is excellent with clear optics. Original
walnut stock is excellent with light handling marks. Box is very good with some corner and edge wear. Case is fair with multiple broken latches.
Estimate: 3250 - 4500
LOT 617
Poly Technologies AKS 762 Semi-Automatic Rifle with Bayonet and Box - Serial no. PF-08431, 7.62x39 cal., 16 1/2 inch round bbl.,
blue finish, steel stock. Hooded post front and tangent rear sights, standard markings, smooth hardwood handguard, checkered pistol
grip, and folding steel buttstock. Includes original box hand numbered to gun, two extra magazine, and canvas web sling.
CONDITION: Excellent with 98% original blue finish, some light edge wear visible at the rear of the receiver cover, and small bright line
under the safety lever. The grip and handguard are also excellent with some small dings. Mechanically excellent. Box is very good with
storage and handling marks.
Estimate: 1400 - 2250
LOT 618
Scarce Pre-Ban Heckler & Koch SP89 Semi-Automatic Pistol - Serial no. 21-16653, 9 mm para cal., 5 inch round bbl., black finish, polymer grips. Manufactured in 1990.
This is a rare example of an original H&K semi-automatic pistol that was produced on a limited basis as a shortened version of the H&K 94 rifle. Standard markings and
features. With soft case and four extra magazines.
CONDITION: Excellent, 99% original black finish remains with some light handling marks. Mechanically excellent.
Estimate: 3500 - 4500
LOT 619
Desirable Pre-Ban Heckler & Koch HK91 Semi-Automatic Rifle - Serial no. A029136, 308 Win cal., 18 inch round bbl., black
finish, polymer stock. Manufactured in 1981 and imported through HK Inc. in Arlington, Virginia. Standard
markings and features with folding adjustable bipod, clip-on casing deflector, and fixed polymer buttstock.
With canvas web sling, Assault Systems soft case, four extra magazines, and cleaning kit.
CONDITION: Excellent 90% plus original black finish, traces of light edge wear, small surface scratches, and handling marks overall.
The stock and grip set have a few small dings but are otherwise excellent. Mechanically excellent. Case is very good.
Estimate: 1800 - 2750
LOT 620
Colt AR-15 A2 HBAR Sporter Semi-Automatic Rifle with Scope - Serial no. SP242713, 223 cal., 20 inch round bbl., matte black finish, synthetic
stock. Introduced in 1987 as a factory ready tactical rifle. Birdcage flash hider, post front sight on the gas block without bayonet lug,
round ribbed and ventilated handguard, standard markings on the lower receiver, fixed carry handle on the upper receiver with 800
meter adjustable rear sights, ARMS/Colt scope mount, correct rubberized 3-9x Tasco scope, standard checkered
grip, fixed buttstock with cheek riser with molded Rampant Colt logo, and checkered trapdoor buttplate. With
original aluminum case with matching Colt factory label, black leather sling, extra magazine, and cleaning tools.
CONDITION: Excellent with 99% original matte black finish remaining, some scattered light handling marks, and just a few small scuffs and
dings. Mechanically excellent. Scope is excellent with clear optics. Case is excellent with some light storage marks.
Estimate: 1500 - 2500
383

384
LOT 621
Desirable Pre-Ban Fabrique Nationale FAL Semi-Automatic Rifle - Serial no. 2504039, 308 Match cal., 20 inch round bbl.,
black finish, plastic stock. Manufactured in Belgium after FN went through the “G Series”
debacle with the ATF and made appropriate adjustments to the commercial FAL to pass
federal muster. Post front and sliding peep rear sights, long slotted flash hider with bayonet lug,
hand-adjustable gas system, vented handguard and smooth stock. The receiver is marked: “308 MATCH” on the left and “FABRIQUE
NATIONALE HERSTAL/MADE IN BELGIUM/GUN SOUTH INC. TRUSSVILLE AL” on the right. The trigger group is the proper 2-position “S/R” markings/configuration. The bolt
and bolt carrier are numbered to match the receiver.
CONDITION: Excellent with 97% plus original black finish remaining, some light edge wear on the flash hider, and small scattered handling marks. The stock and grip set
have some scattered light surface dings and scratches, but are otherwise excellent. Mechanically excellent.
Estimate: 2750 - 4500
LOT 622
Desirable Pre-Ban Heckler & Koch HK93 Semi-Automatic Rifle - Serial no. A131189, 223 cal., 16 1/2 inch
round bbl., matte black finish, polymer stock. This is an early HK-93 rifle manufactured in 1981 and imported
through HK in Arlington, VA. The left side of the magazine well marked is with the model, serial number, caliber, and “IB” date code. The right side is marked
with the HK Arlington, VA address. Fitted with a hooded post front and four position drum rear sights, textured polymer forearm, two position “0/1” safety, and a fixed
polymer buttstock with an added cheek riser, and checkered rubber butt. Includes extra magazine.
CONDITION: Excellent with 95% original matte black finish, some scattered light scratches and handling marks, and some visible bright wear on the upper receiver
where a scope base was installed. Grip and stock set is very good with visible small dings and scratches overall. Mechanically excellent.
Estimate: 2250 - 3500
LOT 623
Scarce Heckler & Koch SR9T Target Semi-Automatic Rifle - Serial no. 46-000070, 7.62x51 cal., 20
inch round bbl., matte black finish, polymer stock. Introduced in 1990 by H&K as a work-around of
the 1989 federal ban on the importation of so called “assault weapons. Ghost ring and post front and four position drum
rear sights, long barrel without a muzzle device, and a textured polymer handguard. The left side of the magazine well has standard markings and is correctly
stamped “T” through the black finish denoting it was placed in this configuration by H&K U.S.A. after it arrived in the U.S. Standard trigger group with “0/1” safety
markings, adjustable trigger stop, and clip on casing deflector. With a textured walnut PSG1 grip and adjustable PSG1 “club foot” buttstock.
CONDITION: Excellent with 95% original matte black finish, scattered light handling marks and scratches, and some bright wear visible on the upper receiver where a scope base
had been attached. Grip and stock set are also excellent with light handling marks. Mechanically excellent.
Estimate: 2500 - 3500
LOT 624
MSAR STG-556 Semi-Automatic Bullpup Carbine with Scope, Case and Accessories - Serial no. 600-
BLK00359, 223 cal., 16 1/2 inch fluted bbl., black finish, polymer stock. This American made version of the well
known Steyr AUG bullpup carbine features a bird cage style flash hider, fluted barrel, hand adjustable gas system,
fold down forward grip, standard markings, right side mounted accessory rail, AUG style scope with integral blade
and notch sights on top, ambidextrous ejection ports, full polymer chassis, and serrated rubber buttplate. Includes
an MSAR branded, fitted hard case with matching serialized Microtech Currahee fighting knife with a full tang
single edge, 4 3/4 inch, drop point D2 tool steel blade, sheath, three extra magazines, cleaning kit,
and nylon web sling.
CONDITION: Near new in case with only light handling marks overall. Case is excellent with some light storage and
handling marks on the exterior.
Estimate: 2500 - 3500
LOT 625
Wilson Combat Super Sniper Semi-Automatic Rifle with Scope and Soft Case - Serial no. WCA11066, 223
Wylde cal., 20 inch round fluted bbl., black finish, polymer stock. Medium weight fluted stainless steel barrel with
a 13 3/4 inch Wilson Combat T.R.I.M. machined aluminum, rail-top hand guard, receiver with integral top rail,
Trijicon ACOG optical sight, standard receiver markings, textured polymer grip, and Rogers Super-Stoc six position
collapsible buttstock. Includes a Wilson combat soft case, four extra magazines, and papers.
CONDITION: Near new with only light scattered handling marks overall. Scope is excellent with clear optics and
bright reticle. Case is excellent.
Estimate: 1600 - 2750
LOT 626
Desirable Colt Model LE6940 Law Enforcement Semi-Automatic Carbine with Box - Serial no. LE060339, 223
cal., 16 inch round bbl., black finish, polymer stock. Standard front sight with a rail top monolithic upper receiver with flip up post front and adjustable flip up rear
peep sights. The left side of the lower receiver has the standard model, caliber, serial number, and address markings, and the right side is marked with the desirable
“RESTRICTED” legend. Fitted with a checkered pistol grip and a four
position collapsible buttstock. Includes
original box, nylon web sling, and manual.
CONDITION: Near new in box with only a few
light handling marks overall. Box is very good
with storage marks and mild corner
and edge wear.
Estimate: 1100 - 1600

LOT 627
Barrett Model 98B Bolt Action Rifle in .338 Lapua Magnum with Case - Serial no. 98B00766,
338 Lapua cal., 27 1/2 inch fluted bbl., matte black finish, polymer stock. The Barrett Firearms
company has long been known as the premier long range sniper rifle company, who pioneered the M82 semi-automatic long range sniper
rifles in .50 BMG. However this rifle is radically different in that it’s a bolt action design with a detachable box magazine. The .338 Lapua is an
outstanding cartridge, having an effective range of 1,800-2,500 meters with considerable less recoil than the 50 BMG. Manufactured with a one-piece aluminum receiver, and
lower trigger housing (to reduce weight) that features a full length Mil-Std 1913 Picatinny rail on top. The barrel has an integral barrel extension/locking lugs on the end that fit
into the receiver and directly interface with the bolt. With a special Barrett muzzle-brake on the end. This rifle has an adjustable buttstock (cheekpiece height) with an adjustable
mono-pod on the underside of the stock. The front end is fitted with a Harris folding bipod. Includes matching numbered Pelican 1750 hard case and extra magazine.
CONDITION: Excellent overall with 99% plus original matte black finish, scattered light handling marks, and some mild cycling marks. Mechanically excellent.
Case is very good with mild storage wear.
Estimate: 3500 - 5500
LOT 628
Barrett Firearms REC7 Semi-Automatic Carbine with Box - Serial no. B00866, 6.8mm Rem Spc cal., 17 inch
round bbl., matte black finish, polymer stock. Manufactured without sights with a bird cage flash hider, 9 inch milled
aluminum A.R.M.S. S.I.R. handguard with rail top and attaching points on the sides and bottom, flat top upper receiver
with deflector and forward assist, and standard markings on the lower receiver. Checkered grip and six position
collapsible buttstock. With original box, three extra magazines, and manual.
CONDITION: Near new in box with only light handling marks. Box is very good with storage marks.
Estimate: 1200 - 2000
LOT 629
Scarce Heckler & Koch SR9TC Target Competition Semi-Automatic Rifle with Zeiss Scope - Serial no. 46-001934,
7.62x51 cal., 20 inch round bbl., black finish, polymer stock. Introduced in 1990 by H&K as a work-around of
the 1989 federal ban on the importation of so called “assault weapons”. Ghost ring and post front and four
position drum rear sights, long barrel without a muzzle device, and a textured polymer handguard. The upper receiver has been fitted with a correct
A.R.M.S. scope base and Carl Zeiss DIAVARI-DA 1.5-6x scope. The left side of the magazine well has standard markings and is correctly stamped “TC” through the
black finish denoting it was placed in this configuration by H&K U.S.A. after it arrived in the U.S. Standard trigger group with “0/1” safety markings. With a textured
walnut PSG1 grip and adjustable PSG1 “club foot” buttstock. With soft case and extra magazine.
CONDITION: Excellent overall with 99% original matte black finish remaining, some light handling marks, and a few very small scratches on the stock. Mechanically
excellent. Scope is very good with scattered scratches on the tube, and clear optics.
Estimate: 2500 - 3500
LOT 630
Desirable Pre-Ban Heckler & Koch HK91 Semi-Automatic Rifle - Serial no. A051871, 308 Win cal., 18 inch
round bbl., black finish, polymer stock. Manufactured in 1981 and imported through HK Inc. in Arlington, Virginia.
Standard markings and features.
CONDITION: Excellent with 95% original finish, scrapes and scratches on the upper receiver where a scope base was mounted, mild oxidation around the flash hider, and
small dings around the magazine well and ejector port. The stock and grip set are also excellent with some small dings and scratches. Mechanically excellent.
Estimate: 1600 - 2500
LOT 631
Fabrique Nationale FS2000 Semi-Automatic Carbine with Box
- Serial no. 051277, 223 cal., 17 inch round bbl., black finish, polymer
stock. A civilian semi-automatic version of the FN F2000 automatic
bullpup carbine with
bird cage flash hider, rail
mounted post front and flip
up rear peep sights, hand
adjustable gas system, and
forward ejection system.
The carbine has a textured
full polymer chassis with
ribbed rubber recoil pad.
Includes original box,
cleaning kit, and matching
numbered shipping sleeve.
CONDITION: Near new
in box with only light
handling marks. Box is
excellent with some light storage marks.
Shipping sleeve is very good.
Estimate: 1800 - 2750
LOT 632
Colt CAR-A3 HBAR Elite Semi-
Automatic Rifle with Scope - Serial no.
BK008835, 223 cal., 24 inch round bbl., matte black finish,
synthetic stock. Introduced in 1996 this was intended to be
Colt’s long range premier AR15 varmint rifle, as it was fitted with an extra long heavy HBAR- type
stainless steel match barrel. It is marked on top of the barrel, “MP 5.56 NATO 1/9 HBAR ELITE” with
an A4 flat top upper receiver. Mounted with an Leupold Vari-X III 6.5-20 variable zoom scope and
a B-Square/Colt base. The receiver has the standard Colt factory markings on the left side of the
magazine well and is fitted with a match grade trigger group. The handguard is all aluminum
free-floating version with studs. Fitted with a standard checkered pistol grip and standard straight
synthetic stock with butt trap.
CONDITION: Excellent with 95% plus original matte black finish remaining, small scattered scuffs,
handling marks overall, and traces of visible edge wear. The grip and stock set are also excellent
with some small scattered scratches and dings. Mechanically excellent.
Scope is excellent with clear optics.
Estimate: 2500 - 3750
385

LOT 633
Desirable Pre-Ban Heckler & Koch HK91 Semi-Automatic Rifle with Scope - Serial no. A027583,
308 Win cal., 18 inch round bbl., matte black finish, polymer stock. Manufactured in 1981 and
imported through HK Inc. in Arlington, Virginia. Fitted with a correct clamp on scope mount,
Kahles ZF84 6x42 scope, checkered ventilated green forearm, contoured and
textured matching grip, and fixed polymer buttstock. Includes a shipping box, black
collapsible A2 style buttstock, black polymer forend with folding bipod, matching black grip, and six extra magazines.
CONDITION: Excellent with 98% plus original black finish, small bright line under the safety switch, some minor edge wear on the left
side near the muzzle, and a few scattered surface scratches and handling marks. The stock and grip set are also excellent with some
small scattered scratches and dings. Mechanically excellent. Scope is excellent with clear optics. Accessories are excellent.
Estimate: 2750 - 3750
LOT 634
Early Three Digit Serial Number Texas Production
Springfield Armory M1A Semi-Automatic Rifle - Serial no. 000884, 7.62x51 cal., 22 inch
round bbl., parkerized finish, walnut stock. Blade front and fully adjustable rear peep sights, long slotted muzzle brake with bayonet
lug, and “DEVINE. TEX” marked barrel. U.S.G.I. pattern stock with selector cut out (no selector), DoD “eagle” stamp on the left side,
and single circled “P” on the inside of the grip. With a checkered trapdoor buttplate with checkered flip up shoulder rest.
CONDITION: Excellent with 99% original dark parkerized finish remaining, some scattered light handling marks. There is a slight gap between the
receiver and stock, otherwise the stock is also excellent with a few small scratches and dings. Mechanically excellent.
Estimate: 2250 - 3500
LOT 635
Springfield Armory Inc. M1A National Match Semi-Automatic Rifle with Scope - Serial no.
024711, 7.62x51 Nato cal., 22 inch round bbl., parkerized finish, walnut stock. Manufactured in 1984 with “NM”
barrel, early blade front and adjustable rear peep sights, long slotted flash hider with bayonet lug, Springfield
Armory A.R.T. IV scope base with ART IV 3-9x scope, “TRW” marked bolt carrier, “SA” marked trigger
group, “HRA” marked hammer, and standard markings on the receiver heel. U.S.G.I. style pistol grip
stock with DoD “eagle” on the left side, circled “P” on the inside of the grip, tied on unmarked leather
cheekpiece, canvas web sling, and checkered trapdoor buttplate with flip up shoulder rest. The stock is cut for a selector and
fitted with a non-functioning selector switch. Includes clamp on folding bipod, bayonet with sheath, and extra walnut stock with serrated plastic pistol grip,
and folding wire buttstock.
CONDITION: Excellent with 95% plus original parkerized finish remaining, some small scattered scratches and handling marks, and light cycling marks on the
receiver rails. The stock is also excellent with some scattered small dings, and mildly worn markings. Mechanically excellent. Scope is excellent with clear optics.
Estimate: 2000 - 3250
LOT 636
Pre-Ban Valmet Model 76 Semi-Automatic Rifle - Serial no. 165670, 223 Rem cal., 16 inch round bbl., black finish,
walnut/plastic stock. Manufactured in Finland. Hooded post/ flip up dot front and military tangent rear sights. The
rear sight base is numbered to match the receiver. Three-prong flash hider with integral bayonet lug. Left side of the
receiver is marked “VALMET Finland/Cal.223 REM”. Checkered ergonomic forearm and pistol grip, with a walnut buttstock, with a serrated butt.
CONDITION: Excellent. The rifle retains 98% original black finish with some minor scratches of the barrel and receiver. The stock is excellent with a tiny chip near the
receiver and some minor handling marks. Mechanically excellent.
Estimate: 1800 - 2750
LOT 637
Pre-Ban Colt AR-15 SP1 Semi-Automatic Rifle with Scope - Serial no. SP20260, 223 cal., 20 inch round bbl., matte black finish, polymer stock.
Manufactured in 1972 with a birdcage flash hider, standard post front sight on the gas block with
bayonet lug, windage adjustable flip up two-leaf rear peep sight, A1 pattern upper receiver with fixed
carry handle, no forward assist or casing deflector, Colt branded Tasco 3x20 scope
with leather lens caps, standard markings on the lower receiver, checkered pistol
grip, long vented triangular handguard, and fixed buttstock with serrated rubber
buttplate. Includes black canvas web sling.
CONDITION: Excellent with 98% plus original matte black finish, some scattered small surface scratches, and
minor handling marks. The stock and grip set are also excellent with some scattered small dings and scratches. Optics are crisp with minimal wear
on the scope body. Mechanically excellent.
Estimate: 1500 - 2500
386
LOT 638
Poly Technologies Model AK-47/S National Match Semi-Automatic Rifle - Serial no. NM47-01970,
7.62x39 cal., 21 1/2 inch round bbl., blue finish, hardwood stock. Manufactured in China as a semiautomatic
version of their Type 56 assault rifle. Features a forged receiver with standard sheet metal cover, slightly heavier barrel, post front and tangent
rear sights, threaded muzzle with cone flash hider, detachable magazine, two piece smooth handguard, checkered pistol grip, and a smooth buttstock with a
trapdoor buttplate. Numbers match on the bolt, carrier, and gas tube. Includes canvas web sling.
CONDITION: Excellent with 97% original blue finish remains with some small scattered scratches, and some visible bright wear under the safety lever and rear
sling swivel. The stock and handguard set are also excellent with some small dings. Mechanically excellent.
Estimate: 1400 - 2250

Auctions provide a means by which prospective buyers are afforded a pure
opportunity to buy at the “market” price. The experienced auction buyer
knows the rules and format that each auction event has established. The fast
paced action at our auctions make for an exhilarating buying atmosphere.
Therefore, we offer the following recommendations to enhance your chances
for successful bids. For more information about Rock Island Auction Company
visit our web site at rockislandauction.com
SPECIAL VIEWING
Special previewing and auction will take place at the Rock Island Auction
Facilities at 7819 42nd Street West, Rock Island, Illinois. The Rock Island
Auction Company has constructed from the ground up the finest firearms
auction facility in the nation. The Rock Island Auction Company facility is
located five minutes from the Quad City International Airport. Previewing
of items is available Thursday, September 10th from 10 a.m. to 6 p.m.
Viewing is also open beginning at 7:30 a.m. and all day during the auction
Friday and Saturday on items not being sold that particular day. This is the
time for the prospective buyer to examine each item offered for auction.
Rock Island Auction Company’s web site has the entire catalog on line. All
photographs and descriptions are available. The on-line catalog is typically
posted to the web about 5 - 6 weeks before the auction.
THE CATALOG
Before each auction Rock Island Auction Company publishes the finest
catalog in the industry. Our catalogs provide descriptions, estimated
values, and usually a photo of each lot.
We offer our catalogs by subscription (3) or by single copy. The catalogs
serve as a guide to prospective bidders. They also offer the buyer a very
good reference source as a prices realized report is provided to all catalog
recipients after the auction.
The catalog is simply a tool at the prospective bidders disposal. We strongly
encourage all bidders to inspect each lot or have any agent inspect each lot
before the sale. A lot may contain one item or a group of items.
RESERVES
All lots in a catalog maybe subject to a reserve. We may accept certain
items to have a reserve. This reserve is the minimum amount that must be
reached for the item to sell.
ESTIMATED VALUE
Estimated values for each lot are posted as part of the description. The
estimated prices are simply estimated guidelines on current market price
for that item. Estimated values are only one person’s opinion on the value.
Estimated values for many items are posted months in advance for the sale.
FOUR WAYS TO BID AT AUCTION
1) On-Site Bidding. Bidders are registered prior to auction and each is
issued a bidder card. Acceptance of the bidder card is also acceptance of
all terms and conditions of the sale. The bidder card is held up to signify a
bid. Generally, the bidding begins at one-half the estimated value and will
continue at our established bid increments.
Auction bids are designed to adhere to approximately 10% of bid price.
Auctioneer’s at their discretion may or may not cut a bid on increments
under the $1000.00 level. However, over $2500.00, the auctioneer’s will
adhere to the following bid increments:
$50 - $200: $10 increment
$200 - $500: $25 increment
$500 - $1,000: $50 increment
$1,000 - $2,000: $100 increment
$2,000 - $5,000: $250 increment
$5,000 - $10,000: $500 increment
$10,000 - $20,000: $1,000 increment
$20,000 - $50,000: $2,500 increment
$50,000 - $100,000: $5,000 increment
$100,000 - $200,000: $10,000 increment
$200,000 - $500,000: $25,000 increment
Over $500,000: Auctioneer's discretion
Each lot will be identified by display on closed circuit TV throughout the
auction gallery. Each bidder should decide in advance the maximum
amount they wish to bid. When bidding starts, leave your bidding card up
until your bid wins or your maximum amount is reached. The advantage
in leaving your bidding card up is that if the final bid is your limit, you will
prevail as opposed to another bidder who also had the same maximum
limit but did not raise their card in time.
2) Sealed Bids or Absentee Bids. If you are unable to attend the auction,
you may submit a sealed bid. An auction staff member will then bid on your
behalf. The bidding proceeds as if you are in attendance. The staff person
will try to secure the lot with the lowest possible bid. Located in the back
of the auction catalog you will will find a sealed bid form complete with
instructions. All sealed bids require prior credit approval or a deposit equal
to 15% of the total bids submitted. All deposits on unsuccessful bids will be
returned within (10) days after the sale. By their submission all sealed bids
signify agreement by the bidder to the terms and conditions of sale. When
submitting sealed bids, please be aware of our established bid increments.
Situations exist that could cause an item to be sold one bid below or at your
maximum bid amount, yet you will not prevail as the successful bidder. We
will execute bids only in the proper bid increments. For example we will
round a bid of $205.00 to $200.00 or a bid of $965.00 to $950.00.
3) Telephone Bidding. Bidding by telephone can also facilitate participation
in our auction. This type of bidding requires prior notice and prior credit
approval. Absent credit approval a telephone bidder must submit a deposit
equal to 15% of the low estimate on all lots to be bid by telephone. All
deposits on unsuccessful bids will be returned within (10) days after the
sale. A person who wishes to bid by telephone must contact Rock Island
Auction Company prior to the auction date. Upon approval, the bidder will
be telephoned on the day of the auction at the time the lot or lots they have
arranged to bid on come up for auction. An auction staff member will bid
according to instructions received over the telephone. Refer to the Terms &
Conditions of Sale for further information.
NOTE: The telephone bidding can become fast and noisy. We strongly
recommend that telephone bidders give the auction staff member a
starting point on the amount to bid on each lot before the bidding begins.
We can apply the idea of leaving a card up until the bid prevails or the
amount is exceeded. Telephone bidders also possess the option to exceed
their original maximum if they so choose.
4) Live Bidding Via the Internet
In order to bring the auction to you live Rock Island Auction Company
offers their own live bidding site - RIAC LIVE, as well as the outside services
of Proxibid. There is an additional 1% added to the buyer's premium for
using RIAC LIVE - the buyer's premium being 18.5% if paying by credit
card, reduced to 16% if paying by cash or check. There is and an additional
3% buyer's premium for using Proxibid - the buyer's premium being
21.5% if paying by credit card, reduced to 18% if paying by cash or check.
NOTIFICATION OF SUCCESSFUL BIDS
In order to expedite notification of any successful bids, if the bidder has a
RIAC web account, the bidder will be notified via email that the bidder was
successful and to check his or her account. A form will be provided for the
successful bidder to complete and return to RIAC with regard to shipping
instructions and method of payment. Once RIAC receives the form RIAC
will follow up with a phone call to confirm that all information on the form
is correct. RIAC will process the order upon receiving payment and any
applicable licensing fees. If the bidder does not have a web account with
RIAC, RIAC will call the bidder regarding payment and shipping instructions
and follow up with an invoice in the mail.
CONSIGNING PROPERTY TO AUCTION
Rock Island Auction Company, provides you an unbeatable team in which
to offer your firearms to auction.
The process commences with an evaluation of the property. This
information can be gathered several ways. Initially a detailed list is
invaluable. Once the list is assembled Rock Island Auction Company will
provide a determination of pre-auction value estimates. Photographs can
further convey condition and are very helpful in establishing a pre-auction
estimate. Any other pertinent information (i.e. dimensions, factory letters,
etc.) are helpful. If you have a sizeable collection, Mr. Hogan or a Rock Island
Auction Company specialist is available by appointment, to appraise your
property on your premises. After that specific appraisal, you may decide
to consign your collection to an upcoming auction. Rock Island Auction
Company is also prepared to offer to purchase the collection outright.
If you decide to consign your property for auction, we will provide
assistance each step of the way beginning with assistance in packing
the collection for transport to Rock Island Auction Company through the
presentation of the collection, in the most professional manner. We will
treat the collection as if it were our own. We will provide insurance for a
preset value and all items will be stored properly and safely in a secured
alarmed area. A total account statement of prices realized will be provided.
Payment in full will be made within 35 days after auction.
Sales commissions vary, depending upon the overall value of the collection.
Rock Island Auction Company offers the most competitive rates in the
industry and will deal with you on a professional level.
For further information regarding consigning please contact:
Patrick F. Hogan, Kevin Hogan, or
Jessica Tanghe at 1-800-238-8022
or 309-797-1500 Monday thru Friday
8 am to 5 pm CST.
Recommendations for Bidders
387

ILLINOIS
1. JUMER'S CASINO
AND HOTEL
777 Jumer Drive
Rock Island, IL
(309) 756-4600
2. HAMPTON
INN & SUITES
2450 69th Avenue,
Moline, IL
(309) 762-1900
3. LA QUINTA INN
Hwys 150 & 92
Moline, IL
(800) 531-5900
4. QUALITY INN AND
SUITES MOLINE
6910 27th St
Moline, IL
(309)762-8300
5. HOLIDAY INN EXPRESS
2100 69th Ave
Moline, IL
(309) 517-6400
6. BEST WESTERN
AIRPORT INN
2550 52nd Avenue
Moline, IL
(309) 762-9191
7. COMFORT INN
OF MOLINE
2600 52nd Avenue
Moline, IL
(309) 762-7000
8. FAIRFIELD INN
2705 48th Avenue
Moline, IL
(309) 762-9083
9. COUNTRY
INN & SUITES
2721 69th Ave. Court
Moline, IL
(309) 797-4249
10. RESIDENCE INN
BY MARRIOTT
4600 53rd Street
Moline, IL
(309) 796-4244
11. HYATT HOUSE
111 Bend Blvd,
East Moline, IL
(309) 755-6000
12. STONEY CREEK INN
101 18th Street
Moline, IL
(309) 743-0101
- AUCTION FACILITY LOCATION -
Rock Island Auction Company
7819 42nd Street West, Rock Island, IL 61201
1
16 17 18
15
23
14
22
21
20
13
24
12
5 6 7 8
19
3
9
2
4
10
11
AIRLINES SERVING MLI
TRANSPORTATION
United, Delta, ATA, Northwest, American, are but a few of the airlines that service the Quad City Airport.
The Rock Island Auction Facility is less than ten minutes from the airport.
Interstate 280 and Highway 92 are the major highway intersections.
W
N
S
E
13. RADISSON INN
1415 River Drive
Moline, IL
(309) 764-1000
14. THE ELEMENT
316 12th St, Moline, IL
(309) 517-1659
15. HOLIDAY INN
226 17th St. Suite 1
Rock Island, IL
(309) 794-1212
IOWA
16. THE CURRENT
215 North Main Street
Davenport, IA
(563) 231-9555
17. RADISSON QUAD
CITY PLAZA
111 East 2nd Street
Davenport, IA
(563) 322-2200
18. HOTEL BLACKHAWK
200 East 3rd Street
Davenport, IA
(563) 322-5000
19. ISLE CASINO HOTEL
1777 Isle Parkway
Bettendorf, IA
(563) 441-7000
20. HILTON
GARDEN INN
959 Middle Road,
Bettendorf, IA
(563) 265-2121
21. HAMPTON INN OF
DAVENPORT
3330 E. Kimberly Rd
Davenport, IA
(563) 359-3921
22. HOLIDAY INN
HOTEL & SUITES
4215 Elmore Ave
Davenport, IA
(563) 344-2900
23. RHYTHM CITY
CASINO RESORT
7077 Elmore Avenue
Davenport, IA
(563) 328-8000
24. HOME2 SUITES
975 Utica Ridge Rd.,
Bettendorf, IA
(563) 345-1130
388

®