Rand McNally Update - Rand McNally Dock | Rand McNally GPS Update

Rand McNally Update | Rand McNally Dock | Rand
McNally GPS Update
rand-mcnally-update.com
Rand McNally Update
Rand McNally Update is the simplest means to ensure that your laser-sharp GPS Device
always stays up-to-date. It is an essential activity that leaves your gadget in perfect
health. Not only that, its Map Updates ensures your Device delivers pin-point accuracy.
Get Rand McNally Update With a Simple Process
1. For the purpose of Rand McNally Update, make sure that the sophisticated GPS
Device is detached from your automobile. Along with that, it must be fully
charged.
2. Now, Turn On both the GPS Device and your Computer.
3. Before proceeding further, ensure that your system is hooked to an Internet
Network that is strong and stable.
4. Hook up the GPS gadget to the Computer through the cable that accompanies your
Device.
1/3

5. As you connect it, a “Connected” status will appear on the Display Screen of Rand
McNally.
6. In addition to that, your system will launch the previously installed Rand McNally
Dock.
7. On its Homepage, locate the icon for Available Updates. In short, look for a sign
with a diagonal arrow. If updates are available, then it will be highlighted in Green
Colour. However, in the absence of any updates, it will be displayed in Grey
Colour. Hence, click on it if updates are available.
8. As such, the next window will enlist available Rand McNally Update for the
connected GPS Device.
9. Select the available Updates from this list. Although, it is recommended to select
all of the available Rand McNally Update.
10. On the following window, look for highlighted Arrow Sign in Green Colour that
reads “Begin Download”. Click on it and start downloading the available Rand
McNally Update.
11. Updates vary in size. Therefore, the actual time taken by the downloading process
will also vary accordingly. Moreover, the downloading speed of your Internet will
also affect it. This implies that you will have to wait until the process completes
properly.
12. While you are waiting, keep track of the progress of the download. For this, check
the status on the Dock.
13. Once you get the Confirmation message as the download completes, then, proceed
for installing Rand McNally Update on your device.
14. Look for another highlighted icon with an Arrow Sign. It must say “Transfer”. As
such, click on it and transfer the downloaded updates to your sophisticated GPS
gadget.
15. Subsequently, wait for the process to complete. Once, the process completes, you
will get a notification from the Dock.
16. Finally, click “Back” and get back to the Dock’s Home window.
17. At last, disconnect the Device when prompted to do so.
Why Does Rand McNally Update Fails?
2/3

While it is true that Rand McNally GPS Update is an extremely convenient, quick and
user-friendly process. Yet, it cannot rule out the possibility of failures and issues from
time to time. However, the major concern in the entire process is the strength and speed
of your Internet Connection.
Apart from that, lack of sufficient Free Space on your Hard Disk will also lead to its
failure. Although, there are other reasons including issues with the Dock, OS, Firewall
etc. responsible for such troubles.
Therefore, it is advised to consider some precautions before performing this process.
You can check the same below.
Precautions
1. In the very first place, give due consideration to your Internet Network. You must
assure that your Internet Connection is strong, reliable and offers good
downloading speed. If possible, prefer a Broadband Connection with LAN Cable
instead of other options.
2. At the same time, ensure that your Computer is properly connected with the
Network and is getting good signals/ speed.
3. In order to download Rand McNally Update, you must have its free of cost
application called Rand McNally Dock. It is essential. Hence, ensure that you have
already installed the same correctly on your Device.
4. Additionally, Register your GPS Device correctly at the Dock in case if you are a
first-time user.
5. Above all, double-check your system’s Hard Drive for Free Space. You must ensure
that your system has the required space available for Rand McNally Update.
6. Lastly, do not forget to ensure that your GPS Device is fully charged and turned
On. This is because Dock will fail to recognize a Device that is powered off.
Moreover, if your Device switches off during the downloading or installation
process due to this reason. Then, the process will fail.
3/3