Phoenix Safety Head to Toe Protection Catalogue 2021

2020/21 

HEAD TO TOE 

PROTECTION 

ESTABLISHED 1971 

CELEBRATING 50 YEARS AS A FAMILY BUSINESS 

WWW.PHOENIX-SAFETY.CO.UK 

Telephone: 0113 257 4475 or 0113 255 5415 

Email: sales@phoenix-safety.co.uk 

Phoenix Accessories (Safety) Ltd, Waterloo Mills,Waterloo Road, Pudsey, Leeds. LS28 8DQ 

Telephone: 0113 257 4475 or 0113 255 5415 Fax: 0113 255 0208 Email: sales@phoenix-safety.co.uk

Contents 

Hazard Workwear 2-21 

Clothing & Workwear 22-35 

Hand Protection 36-67 

Safety Footwear 68-91 

Respiratory Protection 92-121 

Eye & Face Protection 122-145 

Head Protection 146-155 

Hearing Protection 156-171 

Workplace Safety Equipment 172-175 

Washroom & Cleaning 176-185 

First Aid 186-197 

Index 198-199 

Personal protection equipment and workwear

Hazard Workwear 

Buying Guide 

Highways Agency: Chapter 8 Traffic Signs 

Manual (Part 2) - Operations: Para 06.3.2 

The workforce and supervisory staff should wear high visibility warning clothing 

at all times when on site. Clothing shall comply with 

EN20471:2016 Class 2 or 3 (Class 3 on motorways and other high speed 

roads) and shall comply with the requirements of paragraph 4.2.3(b) of the 

Standards. The colour of the clothing shall normally be fluorescent yellow or 

fluorescent orange-red complying with Table 2 of the Standards. 

The retro-reflective material shall be to Class 2 as defined in Table 5 of the 

Standards. In addition, on motorways and other high speed roads, high visibility 

jackets or coveralls shall have full length sleeves meeting the requirement of 

paragraph 4.2.4 of EN20471:2016. This requirement may be varied to threequarter-length 

sleeves where a risk assessment shows full-length sleeves would 

present increased risk due to the activity being undertaken. 

Staff should also wear high visibility trousers complying with Class 1 of 

EN20471:2016 where the carrying of large items of equipment or other activities 

may at any time obscure the visibility of the high visibility jacket or vest. 

Highways Agency: Temporary Traffic Management On High Speed Roads: 

Good Working Practice (Section W7). 

Operatives who are engaged in activities on live traffic lanes should wear High 

Visibilty Garments EN20471:2016 Class 3. 

Safety Standards Key 

To aid selection, garments in this catalogue now carry icons denoting the EN Safety 

Standards to which they comply. *All newly Certified High Visibility Garments must 

comply with EN ISO 20471:2016 

EN 471: ISO: 

20471:2016 

EN 343: 

EN 342: 

GO/RT 3279 

EN20471:2016 – High Visibility Warning Clothing 

3 classes of protection 

EN 343 – Protection Against Rain 

3 classes of waterproofness and breathability 

EN 342 – Protection Against Cold 

(Temperatures 25% and when the garment and wearer are continuously and correctly grounded. *** Does not protect against ionizing radiation.



3


High Visibility Clothing 

KeepSAFE Pro 3-In-1 

High-Visibility Bomber Jacket with 

Detachable Fleece 

CONFORMS TO EN ISO 20471 CLASS 3 AND EN343 3;3 

PU-coated waterproof outer fabric, mesh lined with zipin, 

fully detachable lined fleece. 

• Collar-concealed three-piece lined hood 

• Fully taped seams 

• Storm placket to front with grab tab 

• Internal chin guard, fleece lined collar 

• Internal, sleeve, map, and two lower zip fastening 

jetted pockets 

• Reflective tape 

3 

• Size: S-2XL 

3 

EN 471: ISO: 

EN 471: 343 

2003 20471:2013 

20471:2016 +A1:2007 2003 +A1:2007 

Colour: Saturn Yellow 

Code: 321162 

FABRIC ONLY 

KeepSAFE 

High Visibility Bomber Jacket 

CONFORMS TO EN ISO 20471 CLASS 3 

PU coated, waterproof outer fabric with 

polyester quilted lining and collar-concealed 

two-piece unlined hood. Stud fastening storm 

placket, elasticated cuff, internal, mobile 

phone, map, and two lower slanted jetted 

pockets. Reflective tape 



Code: 321146 

Colour: High Visibility Orange 

Code: 305015 

EN 471: ISO: 

20471:2016 

EN 343 

3 

3 

FABRIC ONLY 

4 

KeepSAFE High Visibility Jacket 


PU coated, waterproof outer fabric, 

collar-concealed two-piece unlined 

hood, and polyester quilted lining. 

Map pocket, internal, and two outside 

lower jetted pockets. Studded storm 

placket, storm cuff 



Code: 305066 


Code: 192461 

KeepSAFE High Visibility 

Overtrousers 


PU coated waterproof outer fabric. 

Fully taped seams. Reflective tape 


• Colour: Saturn Yellow 

Code: 343493 

EN 471: ISO: 

2003 20471:2016 +A1:2007 

EN 343 

1 

2 

EN 471: 

2003 +A1:2007 

EN 343 

3 

2 

3 

3 

FABRIC ONLY 

FABRIC ONLY 

BEST SELLER 

KeepSAFE High-Visibility 

Cargo Trousers 


Two back, two thigh, and phone pockets, 

all with Velcro ® fastening. 

• Button fastening, elasticated waist 

• Two side slant pockets 

• 280g/m 2 polycotton 

• Reflective strips 


Size: 28”-48” waist 

Length: Regular Leg 31” 

Code: 302008 

Size: 32"-42" waist 

Length: Long Leg 33" 

Code: 302009 

EN ISO: 471: 

2003 20471:2016 +A1:2007


KeepSAFE 

High Visibility 

Waterproof Jacket 

CONFORMS TO EN 20471 CLASS 3 

PU coated breathable, waterproof outer 

fabric tested to EN 343, with hood and 

stud adjustment at wrist 


• Two side pockets with Velcro ® flaps 



Code: 321170 


EN 471: 

KeepSAFE 


Waterproof Trousers 


PU coated breathable, waterproof outer 

fabric tested to EN 343, 

with fully taped seams. 

• Elasticated waistband 



Code: 321171 

EN 471: ISO: 

20471:2016 

EN 343 

FABRIC ONLY 

KeepSAFE 

High Visibility Fleece Safety Jacket 


Lightly elasticated cuffs, waist hem, and comfort collar. Zip front. 

Two side lower welted pockets. Reflective tape 



Code: 343448 

EN 471: ISO: 

20471:2016 

KeepSAFE High Visibility PU Reversible 

Safety Body Warmer 


PU fabric with zip fastening and quilted lining. Double band reflective tape 



2 

2 

EN 471: ISO: 

2003 20471:2016 +A1:2007 

KeepSAFE High Visibility Softshell Safety Jacket 


Quick drying, lightweight, easy to wear stretch softshell fabric 

that’s wind resistant and has a durable water repellent finish. 

Waterproof zippers, inner zip guard. Chest and two lower pockets 



EN 471: ISO: 

20471:2016 

Code: 384077 

Code: 305124 

5

d 

d 

roup G Stand 

arRailway 

roup G Stand 

arRailway 




Short Sleeve Safety Polo Shirt 

CONFORMS TO EN20471 CLASS 2; RIS-3279-TOM 

(ORANGE ONLY) 

• Size: M-2XL 


Code: 362467 

Colour: High-Visibility Orange 

Code: 362508 

2 

2 

EN 471: ISO: 

2003 20471:2016 +A1:2007 

GO/RT 3279 

only for orange 


Long Sleeve Polo Shirt 


Contrasting navy collar 



Code: 362446 

Colour: High-Visibility Orange 

Code: 015605 

3 

2 

EN 471: ISO: 

2003 20471:2016 +A1:2007 

GO/RT 3279 


GREAT VALUE 

2 

2 

EN 471: ISO: 

2003 20471:2016 +A1:2007 

Centurion Standard Peak 

High Visibility Airpro Baseball 

Bump Cap 

Lightweight head protection, 

peak length 3cm 


Code: 279805 


Code: 279806 

KeepSAFE 

High Visibility Waistcoat 


• Velcro ® fastening 



Code: 430037 


Code: 430034 

6

d 

roup G Stand 

arRailway 

d 

Stand 

roup G arRailway 




Sleeved Waistcoat 


Velcro ® fastening 



Code: 384066 

3 

2 

EN 471: ISO: 

2003 20471:2016 +A1:2007 




Velcro ® fastening 


• Colour: High Visibility Orange 

Code: 384099 

3 

2 

EN 471: ISO: 

2003 20471:2016 +A1:2007 


Executive Waistcoat 


Mobile phone and clear ID pockets. 

Front flap pockets. Zip fastener 



2 

2 

EN 471: ISO: 

2003 20471:2016 +A1:2007 

GO/RT 3279 


Code: 015604 

2 

2 

EN 471: ISO: 

2003 20471:2016 +A1:2007 

GO/RT 3279 



Safety T-Shirt 

• Lightweight, 140g/m 2 birdseye 

100 polyester 




Code: 362453 



AND RIS-3279-TOM 

Code: 362403 Each £18.20 

GREAT VALUE 


Executive Waistcoat 


Mobile phone and clear ID pockets. 

Front flap pockets. Zip fastener 



Code: 305185 

2 

2 

EN 471: ISO: 

2003 20471:2016 +A1:2007 

7


Rail Clothing & Storm Wear 

Bodyguard Workwear GORE-TEX ® Weather Gear 

Bodyguard GORE-TEX ® 

Storm Coat 

EN20471:2013 +A1:2016 CLASS 3 

EN343:2019 3:3 

RIS-3279-TOM ISSUE 2 : 2019 (ORANGE ONLY) 



Storm Overtrousers 

EN20471:2013 +A1:2016 CLASS 1 

EN343:2019 3:3 


• Length: 31" Reg / 33" Tall 



Storm Bomber Jacket 

EN20471:2013 +A1:2016 CLASS 3 

EN343:2019 3:3 




Thermal Lined 

Storm Coverall 

EN20471:2013 +A1:2016 CLASS 3 

EN343:2003 + A1:2007 3:3 





Code: GN900 


Code: GN901 


Code: GN902 


Code: GN904 

Colour: High Visibility Yellow 

Code: GN900Y 


Code: GN901Y 


Code: GN902Y 


Code: GN904Y 

Bodyguard Workwear Vapourking Rail Storm Gear 

Bodyguard Vapourking 

Storm Coat 

EN20471:2013 +A1:2016 CLASS 3 

EN343:2003 + A1:2007 3:3 

RIS-3279-TOM ISSUE 2 : 2019 



Code: GN110VK 


Storm Bomber Jacket 

EN20471:2013 +A1:2016 CLASS 3 

EN343:2003 + A1:2007 3:3 

RIS-3279-TOM ISSUE 2 : 2019 



Code: GN410VK 



EN20471:2013 +A1:2016 CLASS 1 

EN343:2003 + A1:2007 3:3 

RIS-3279-TOM ISSUE 2 : 2019 

• Length: 

29" Sht / 31" Reg / 33" Tall 




Storm Salopettes Inc. 

Detachable Thermal 

Padded Liner 

EN20471:2013 +A1:2016 CLASS 2 

EN343:2003 + A1:2007 3:3 

RIS-3279-TOM ISSUE 2 : 2019 

• Length: 31" Reg 




Storm Coverall Inc. 

Detachable Thermal 

Padded Liner 

EN20471:2013 +A1:2016 CLASS 3 

EN343:2003 + A1:2007 3: 

RIS-3279-TOM ISSUE 1 : 2016 




Code: GN300VK 

Code: GN630VK 

Code: GN620VK 

8


Bodyguard Workwear Vapourtec Storm Gear 


Bodyguard Vapourtec 

Storm Coat Inc. Zip-Out 

Thermal Liner 

EN20471:2013 +A1:2016 CLASS 3 

EN343:2019 3:3 

RIS-3279-TOM ISSUE 2 : 2019 




Storm Bomber Jacket Inc. 

Zip-Out Thermal Liner 

EN20471:2013 +A1:2016 CLASS 3 

EN343:2019 3:3 

RIS-3279-TOM ISSUE 2 : 2019 




Multiway Storm Coat Inc. 3 

Layer Zip-Out Softshell Jacket 

with Detachable Sleeves 

EN20471:2013 +A1:2016 CLASS 3 (Inner 

Jacket is Class 2 when worn without sleeves) 

EN343:2019 3:3 

RIS-3279-TOM ISSUE 2 : 2019 





EN20471:2013 +A1:2016 CLASS 1 

EN343:2019 3:3 

RIS-3279-TOM ISSUE 2 : 2019 

• Length: 31" Reg 



Code: GN110B 

Code: GN410B 

Code: GN115 

Code: GN300B 

Bodyguard Activwear Multi-Climate Rail Gear 

Bodyguard Activwear 

3 Layer Softshell Jacket 

EN20471:2013 +A1:2016 CLASS 3 

RIS-3279-TOM ISSUE 1 : 2016 



Bodyguard Activwear 3 Layer 

Softshell Ski Trousers 

EN20471:2013 +A1:2016 CLASS 1 

RIS-3279-TOM ISSUE 2 : 2019 





Sweatshirt 

EN20471:2013 +A1:2016 CLASS 3 

RIS-3279-TOM ISSUE 1 : 2016 



Bodyguard Activwear Hi-Brid 

Hoody with Perforated Mesh 

Ear Inserts 

EN20471:2013 +A1:2016 CLASS 3 

RIS-3279-TOM ISSUE 2 : 2019 



Code: GN710 

Code: GN800SZM 

Code: GN429 

Code: GN830 

Bodyguard 

Workwear 

Polycotton 

Cargo 

Bodywarmer 

EN20471:2013 

+A1:2016 CLASS 2 

RIS-3279-TOM ISSUE 

2 : 2019 


• Colour: High 

Visibility Orange 

Code: GN210RV 

Bodyguard 

Activwear 

Heavy Duty 

Polar Fleece 

Jacket 

EN20471:2013 

+A1:2016 CLASS 3 

RIS-3279-TOM ISSUE 

2 : 2019 


• Colour: High 

Visibility Orange 

Code: GN700 


Ultimate Cargo Joggers 

EN20471:2013 +A1:2016 CLASS 1 

RIS-3279-TOM ISSUE 2 : 2019 

(ORANGE ONLY) 

• Length: 

29" Sht / 31" Reg / 33" Tall 



Code: GN800 


Code: GN800Y 

9



Bodyguard Activwear Rail Gear 


Short Sleeve Poloshirt 

Bodyguard Activwear Short 

Sleeve T-shirt 


Long Sleeve Poloshirt 

Bodyguard Activwear Long 

Sleeve Polycotton Poloshirt 

EN20471:2013 +A1:2016 CLASS 2 

RIS-3279-TOM ISSUE 2 : 2019 



EN20471:2013 +A1:2016 CLASS 2 

RIS-3279-TOM ISSUE 2 : 2019 



EN20471:2013 +A1:2016 CLASS 3 

RIS-3279-TOM ISSUE 2 : 2019 



EN20471:2013 +A1:2016 CLASS 3 

RIS-3279-TOM ISSUE 2 : 2019 



Code: GN650 

Code: GN660 

Code: GN670 

Code: GN673 

Bodyguard Workwear Rail & Hi Vis Gear 

Bodyguard Workwear Premium 

Polycotton Vest, Pop Studs, 

Zipped Pockets 

EN20471:2013 +A1:2016 CLASS 2 

RIS-3279-TOM ISSUE 1 : 2016 




Polyester Vest, Pop Studs, Velcro 

fastened Pockets 

EN20471:2013 +A1:2016 CLASS 2 

RIS-3279-TOM ISSUE 2 : 2019 



Bodyguard Workwear 

Premium Polycotton 

Multipocket Cargo 

Bib & Brace 

EN20471:2013 +A1:2016 CLASS 2 

RIS-3279-TOM ISSUE 2 : 2019 




Code: GN200RT 

Code: SA200RT 

Code: GN630 




EN20471:2013 +A1:2016 CLASS 1 

RIS-3279-TOM ISSUE 2 : 2019 

(ORANGE ONLY) 

• Length: 

29" Sht / 31" Reg / 33" Tall 

• Size: 28-56 


Code: GN610 


Code: GN610Y 



Multipocket Cargo 

Coveralll 

EN20471:2013 +A1:2016 CLASS 3 

RIS-3279-TOM ISSUE 2 : 2019 




Code: GN620 


Ultralite Polycotton 


EN20471:2013 +A1:2016 CLASS 1 

RIS-3279-TOM ISSUE 2 : 2019 

• Length: 29" Sht / 31" Reg / 33" Tall 

• Size: 28-56 


Code: KPV2GN610 

10


Bodyguard Workwear Vapourking Ladies Storm Gear 

& Bodyguard Activwear Multi-Climate Gear 



Ladies Storm Coat 

EN20471:2013 +A1:2016 CLASS 3 

EN343:2003 + A1:2007 3:3 

RIS-3279-TOM ISSUE 2 : 2019 




Ladies Storm Overtrousers 

EN20471:2013 +A1:2016 CLASS 1 

EN343:2003 + A1:2007 3:3 

RIS-3279-TOM ISSUE 2 : 2019 




Softshell Ladies Jacket 

EN20471:2013 +A1:2016 CLASS 3 

(SMALL AND MEDIUM SIZE - CLASS 2) 

RIS-3279-TOM ISSUE 1 : 2016 




Softshell Ladies Ski Trousers 

EN20471:2013 +A1:2016 CLASS 1 

RIS-3279-TOM ISSUE 2 : 2019 




Code: GN110VKL 

Code: GN300VKL 

Code: GN710L 

Code: GN800SZL 

Bodyguard Workwear & Bodyguard Activwear 

Ladies Rail Gear 

Bodyguard Activwear Short Sleeve 

Ladies Poloshirt 

EN20471:2013 +A1:2016 CLASS 2 

RIS-3279-TOM ISSUE 2 : 2019 



Bodyguard Activwear Long Sleeve 

Ladies Poloshirt 

EN20471:2013 +A1:2016 CLASS 3 

RIS-3279-TOM ISSUE 2 : 2019 




Polycotton Ladies Cargo Trousers 

EN20471:2013 +A1:2016 CLASS 1 

RIS-3279-TOM ISSUE 2 : 2019 

• Length: 27" Sht / 29" Reg / 31" Tall 

• Size: 8-20 


Code: GN651 

Code: GN671 

Code: GN611 

11


Flame Retardant Clothing 

Flame Retardant Standards 

EN 11611 

Tensile strength 

Tear strength 

Burst strength 

Seam strength 

Dimensional change 

Requirements of leather 

Limited flame spread 

Molten droplets 

Heat transfer (radiation) 

Electrical resistance 

EN 11612 As above plus: 

Heat resistance 

Limited flame spread (A) 

Convective heat (B) 

Radiant heat (C ) 

Molten aluminium splash (D) 

Molten iron splash (E) 

Contact heat (F) 

EN 14116 

Flame spread 

Tensile strength 

Tear strength 

Seam strength 

EN 11611: 

2007 

EN ISO 11612: 

2008 

EN ISO 14116: 

2008 

Anti-Static Standards 

EN 1149 

Protective clothing – 

Electrostatic properties 

Anti-static clothing suppresses static 

charge, thereby preventing sparks, 

which might cause a fire or explosion 

EN 1149-5 is a part of a larger system 

EN 1149 consists of the following parts: 

EN 1149-1: 

Test methods for the measurement of surface resistance EN 1149-5: 

EN 1149-2: 

Test methods for the measurement of the electrical 

resistance through a material (vertical resistance) 

EN 1149-3: 

Test methods for the measurement of charge decay 

EN 1149-4: 

Garment test method (under development) 

EN 1149-5: 

Performance requirements 

EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 343: EN 1149-5: EN 

2005 2006 

2007 2003 +A1:2007 2008 

EN 1149-5: 

Arc Standard 

EN 61482-2:2009 

Live working-protective 

clothing EN 1149-5: against the thermal 

hazards of an electric arc 

– Part 2 

Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Clas 

EN 1149-5: EN 1149-5: 

EN 1149-5: 

EN 61482-2: 

2009 

Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Clas 

EN 1149-5: 

Water Penetration and Breathability 

EN 343 

Protection against weather 

elements 

Hi-Visibility 

EN 20471 

Reflective materials 

used 

EN 1149-5: 

in Hi-Visibility 

clothing 

Chemical 

EN 13034 

Protection against 

chemicals 

EN 1149-5: 

EN 471: ISO: 

2003 20471:2016 +A1:2007 

EN 1149-5: 

EN 1149-5: 

EN 1149-5: 

EN 1149-5: EN 1149-5: EN 

Cold Weather 

EN 14058 


extreme weather 

EN 1149-5: 

EN 13034: 

Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A 

EN 14058: 

2005 +A1:2009 

Class 1 - Type A Clas 

2004 

1 

x 

x 

x 

x 

EN 

EN 

12 

Detachable Lining

d 

roup G Stand 

arRailway 

d 

Stand 




EN 471: ISO: 

2003 20471:2016 +A1:2007 

EN ISO 11612: 14116: 

2008 

EN 1149-5: 

EN 1149-5: EN 1149-5: EN 471: ISO: EN 1149-5: EN ISO 11612: 14116: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: 

2008 

2005 2006 

2003 20471:2016 +A1:2007 

2008 2008 2006 2006 2006 

EN 471: ISO: 

2003 20471:2016 +A1:2007 

Pulsar ® Flame-Resistant 

Anti-Static Electric Arc Polo Shirt 

CONFORMS TO EN20471 CLASS 3, EN11612 A1.B1.C1, 

EN 1149-5: 

EN1149-5, RIS-3279-TOM 

220gm Protal / polyester / carbon inherent FR / AS 

knitted fabric. FR knitted collar & cuffs in navy. Three 

button placket. Inherently FR 


• Colour: High-Visibility Orange 

Code: 370421 

Pulsar ® Rail Flame-Resistant Anti-Static 

EN 1149-5: 

Electric Arc Combat Trouser 

CONFORMS TO EN20471 CLASS 2, RIS-3279-TOM, EN11612 

A1.A2.B1.C1.E1.F1, EN11611 A1.A2, EN1149-5, EN1149-3, 

IEC 61482-1-2:CLASS 1 4KA CLASS 1, ATPV 

• Protal 5–310g/m 2 Protex 

• Plastic zip fastening cotton 

inherent multi fibre 

• Side elasticated waist woven fabric 

• Internal knee pad pockets 

• Combat rear and side pockets 

EN 1149-5: 

• Twin stitched FR reflective tape 

and piping 

• Size: 28"-44" Waist 


Code: 370413 

EN 11611: EN ISO 11612: 

2008 

Regular length 

GO/RT 3279 


High-Visibility Sleeveles 

CONFORMS TO EN20471 CLASS 2 & EN 14116 INDEX 1 

100% knitted polyester. Hook and loop fastening. 

Flame EN 1149-5: Retardant Tape EN 1149-5: 

EN 1149-5: 

EN 1149-5: 



Code: 874889 


Code: 874886 

Flame 

EN 1149-5: 

Retardant 

EN 1149-5: 

Coverall 

CONFORMS TO EN11612 A1 B1 F1 EN11611 CLASS 3 A1 

• 365 g/m 2 75% cotton 25% polyester. FR treated 

• Concealed stud fastening 

• 2 breast pockets with flap fastenings 

• 2 side access pockets 

• Action back for increased comfort 

• Size: 92cm-140cm 

(4cm increments) 


EN 1149-5: 

EN 61482-2: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: 

2008 

2009 2005 2006 

2007 2008 2006 2006 2006 2006 2006 

EN 1149-5: 

EN 1149-5: 

Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A 

EN 1149-5: 

Regular length 

Code: 370750 

EN 

Tall 

1149-5: 

length 

Code: 370751 

Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A 

EN 1149-5: EN 1149-5: 

EN 1149-5: 


EN 1149-5: 

EN 1149-5: 

EN 1149-5: 

EN 1149-5: 

EN 1149-5: 

EN 1149-5: 


EN 1149-5: EN 1149-5: EN 1149-5: 

EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: 

EN ISO 11612: 

Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type 2008A Class 1 - Type A Class 1 - Type A Class 1 - Type A 

EN ISO 11612: 

A1 2008 B1 C1 E1 


EN 1149-5: 

EN 1149-5: 

EN 1149-5: 

Meshaw Flame Retardant 

Anti-Static High Visibility Long 


1149-5: 

1149-5: 

CONFORMS TO EN20471 CLASS 3, EN14116 INDEX 

1 & EN1149-5 

98% polyester 2% Anti Static 

Hook and loop fastening. 

FR tape anti static. FR tape 

EN 1149-5: EN 1149-5: 



Code: 370414 

EN 471: ISO: 

2003 20471:2016 +A1:2007 

EN ISO 11612: 14116: 

2008 

EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 11611: 

EN 1149-5: EN 1149-5: 

EN 1149-5: EN 1149-5: 

Class 1 - Class 2007 1 - Type A Class 1 - Type A Class 1 - Type A Type A Class 1 - Type A C 


EN 1149-5: 

EN 1149-5: 

EN 1149-5: 

EN 471: ISO: 

2003 20471:2013 +A1:2007 

EN 1149-5: 

EN 1149-5: 

EN 1149-5: 

EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: 

Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A Class 1 - Type A 

EN 1149-5: 

EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: 

2008 

2005 2006 

2007 2008 

EN 1149-5: 

EN 1149-5: 

fastening, FR tape 

EN 1149-5: 

EN 1149-5: 

EN 1149-5: 

EN 1149-5: 

EN 1149-5: 

EN 1149-5: 

1 


EN 1149-5: 

EN 1149-5: 

EN 1149-5: EN 1149-5: 

EN 1149-5: 

EN 1149-5: 

EN 1149-5: 

EN 1149-5: 

EN 1149-5: 

GO/RT 3279 

EN 1149-5: 

EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: 

2008 

2005 2006 

2007 2008 2006 2006 2006 

Clifton Flame Retardant Anti- 

Static High Visibility Waistcoat 

CONFORMS TO EN20471 CLASS 2, EN14116 INDEX 

EN 1149-5: 

EN 1149-5: 

1 & EN1149-5 

98% polyester, 2% Anti Static. Hook and loop 



Code: 370415 

EN 1149-5: 

EN 1149-5: 


EN 61482-2: 

2009 

EN 61482-2: 

Class 20091 

EN 1149-5: 

EN 1149-5: 

EN 1149-5: 

EN 1149-5: 

Class 1 - Type A 


EN 1149-5: 



EN 1149-5: 


EN 1149-5: 

EN 1149-5: 

EN 1149-5: 


EN 1149-5: EN 1149-5: EN 1149-5: 

EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: 


EN 1149-5: 

EN 1149-5: 


EN 1149-5: 

EN 1149-5: 

EN 1149-5: 

EN 1149-5: 


EN 1149-5: EN 1149-5: 

EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: 


EN 1149-5: 

EN 1149-5: 

EN 1149-5: 

EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: 

EN 1149-5: 

EN 1149-5: 

EN 1149-5: 

EN 1149-5: 

EN 1149-5: 

EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: 


EN 1149-5: 

EN 1149-5: EN 1149-5: EN 1149-5: 

EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: EN 1149-5: 

13



BEST SELLER 

EN ISO 11612: 

2008 

EN ISO 11612: 

A1 2008 B1 C1 F1 

EN ISO 11612: 

2008 

EN ISO 11612: 

A1 2008 B1 C1 F1 

EN 11611: 

2007 EN 11611: 

2007 

BlazeTEK Cotton 

Flame-Retardant 

Trousers 

CONFORMS TO EN11611-1 A1 AND 

EN11612, A1, B1, C1, F1 340G/M 2 

100% FR cotton fabric. 

Two side pockets 

• Size: 30"-46" 

• Colour: Navy 

Length: Regular Leg 

Code: 342456 

BlazeTEK Cotton 

Flame-Retardant Coverall 

CONFORMS TO EN11611 CLASS 1 

A1, EN11612 A1 B1, C1, F1 340G/M 2 

100% FR cotton fabric. Concealed stud front. 

Breast pocket, oversized stud fastened flap. 

Rule and two side access pockets 

• Length: Regular Leg 



Code: 370451 

METAL 

FREE 

TOECAP 

WATER 

RESISTANT 

ANTISTATIC 

METAL 

FREE 

TOECAP 

WATER 

RESISTANT 

ANTISTATIC 

LADIES SIZES 

MIDSOLE 

SRC 

LADIES SIZES 

MIDSOLE 

SRC 

BlazeTEK Anti-Static Flame- 

Retardant Coverall 

CONFORMS TO EN11612 A1, B1,C1, EN1149-5 AND 

EN11611:2007 CLASS 2 

Double stitched Pyrovatex ® fabric 350g/m 2 , with 

triple stitching 

at stress points. 

• Covered two-way zipper with large pullers 

• Two side, two breast, two back, plus ruler and 

sleeve pen pockets 

• Action back and two escape filter loops 

• Heavy press-studs on collar and sleeves 

• Double stitched flame-retardant reflective 

striping on shoulders, 

arms and legs 

• Size: 36"-56" 

• Colour: Orange 

Code: 370618 

Rock Fall ® RF5000 Spark 

Welding Safety Boot 

CONFORMS TO EN ISO 20349-2:2017 S3 HI CI HRO SRC WG 

100% non-metallic, with protective toecap and midsole, 

Spark is a welding boot developed with specialist 

durability materials that are certified to withstand molten 

sparks generated whilst welding, including FORCE10 ® 

components, FR leather and Coats ® FR stitching and 

Ortholite ® climate breathable footbed. Flame Retardant 

full grain black leather stitched with R-TEN FR thread. 

Protective fibreglass toecap and composite antipenetration 

flexi-midsole. Moisture wicking breathable 

mesh fabric lining. FORCE10 ® solid nitrile rubber 

outsole - tested to extraordinary abrasion, heat and cold 

performance levels. Ortholite ® climate breathable footbed 

• Size: 3-14 (full sizes only) 

• Colour: Black 

Code: 102058 

Rock Fall ® RF7000 Vulcan High Leg 

Foundry Safety Boot 

CONFORMS TO EN ISO 20349-1:2017 S3 HI CI HRO SRC FE 

Protective toecap and midsole, Vulcan is a foundry 

boot developed with specialist durability materials that 

are certified to withstand molten splashes as high 

as 1400°C, including FORCE10 ® components, FR 

leather and Coats ® FR stitching and Ortholite ® climate 

breathable footbed. Flame Retardant full grain black 

leather stitched with R-TEN FR thread. Protective 

fibreglass toecap and composite anti-penetration 

flexi-midsole. Moisture wicking breathable mesh fabric 

lining. FORCE10 ® solid nitrile rubber outsole - tested 

to extraordinary abrasion, heat and cold performance 

levels. Ortholite ® climate breathable footbed 



Code: 102067 

14

Disposable Coveralls 

Specialist Disposable Coveralls 


1 

EN 471: ISO: 

2003 20471:2016 +A1:2007 

CATEGORY III TYPE 5-B TYPE 6-B EN 1073-2: 2002 EN 1149-5: 2008* EN 14126: 2003 

Class 1 

DuPont Tyvek ® 500 HV Coverall 

COMPLIANT WITH RIS-3279-TOM ISSUE 1 

Coverall with collar that combines type 5/6 protection 

and high-visibility to the highest class (EN ISO 20471 

RIS-3279-TOM-1 - Class 3/3). Biological protection. 

Reflective bands at chest, arms, legs and shoulders. 

Elasticated waist (glued-in), ankles and cuffs. DuPont 

Tyvek ® zipper. High visibility orange. Antistatic (inside) 



Manufacturer’s code: TY 0125S HV 00PI 

Code: 300182 

METAL 

FREE 

TOECAP 

WATER 

PROOF 

ANTISTATIC MIDSOLE SRC 

T 

3 

CATEGORY III TYPE 3-B TYPE 4-B TYPE 5-B 

TYPE 6-B 

EN 1073-2** 

CLASS 1 

EN 1149-1* 

EN 14126 

TYPE 3B 

DuPont Tychem ® 2000 C Coverall 

CAT. III, TYPE 3B/4B/5B/6B 

Coverall with elastic face opening and adhesive chin 

flap for tight fit around respirator, stitched and overtaped 

seams, double self-adhesive zipper flap, elastic 

cuffs, ankles and waist, thumb loops, 100% particle 

tight fabric, excellent barrier against a broad range 

of concentrated inorganic chemicals and biological 

hazards. Antistatic treatment (inside) 


• Colour: Yellow 

CAT III 

TYPE 6-B 

T 

3 

T 3-B 

EN 1073-2 

CLASS 2 

T4-B 

EN 1149-5 

T 5-B 

EN 14126 

DuPont Tyvek ® 800 J Coverall 

CAT III. TYPE 5B/6B 

Robust yet lightweight breathable coverall, (



Specialist Disposable Coveralls 

CAT III 

T 

3 

T 3-B 

T4-B 

T 5-B 

TYPE 6-B 

EN 1073-2 

CLASS 1 

EN 1149-5 

EN 14126 

CAT III 

TYPE 6-B 

T 

3 

T 3-B 

EN 1073-2 

CLASS 1 

T4-B 

EN 1149-5 

T 5-B 

EN 14126 

DuPont Tychem ® 6000 F Plus Coverall 


Coverall with elastic face opening and chin flap for 

tight fit around respirator, stitched and over-taped 

seams, double self-adhesive zipper flap, double zipper 

and double cuffs, elastic cuffs, ankles and waist, 

thumb loops. 100% particle tight fabric, excellent 

barrier against a broad range of organic chemicals, 

highly concentrated inorganic chemicals and biological 

hazards. Antistatic treatment (inside) 


• Colour: Grey 

Manufacturer’s code: TF CHZ5 T GY 00 

Code 430773 

DuPont 

Tychem ® 6000 F 

Grey Coverall 

CAT. III, TYPE 

3B/4B/5B/6B 

Coverall for protection 

against a broad range 

of chemicals and 

biohazards 

• Sizes: S-3XL 


Manufacturer’s code: 

TF CHA5 T GY 00 

Code: 382112 

16 

CAT III 

TYPE 6-B 

T 

3 

T 3-B 

EN 1073-2 

CLASS 1 

T4-B 

EN 1149-5 

T 5-B 

EN 14126 

DuPont Tychem ® 6000 F 

Orange Coverall 


Coverall for protection against a broad range of 

chemicals and biohazards 

• Sizes: S-3XL 


Code: 014097 Manufacturer’s code: TF CHA5 T OR 00 

DuPont Tychem ® 

NP560 Neoprene Chemical 

Resistant Gloves 

CONFORMS TO EN 388 – 2016 3031X, EN ISO 374- 

1:2016/TYPE A, AJKLMT, EN 374-5 2016-3031X 

Resistant barrier against a range of 

chemicals, including acids, caustics, 

solvents, grease and oil. 

Ideal for heavy duty work or applications 

involving prolonged exposure to the 

presence of solvent 

• Colour: Black. 

• Size: 8-11 

• Length 356mm 

Code: 303087 

Pair 


NP570 CT 

CAT III, EN ISO 374-1, TYPE A, EN ISO 374-5, 

EN 388: 2016 3X43E, ANSI CUT A5 

Protection where tasks present the dual risk of chemical 

exposure and cut. Provides ANSI level A5 and EN level 

5 cut protection and defense against acids, caustics, 

solvents, greases and oils. 

• Neoprene - 13-gauge engineered yarn 

• Thickness: 68 mil (1,73 mm) 

• Nominal coating thickness: 30 mil (0,76 mm) 

• Length: 14 in (356 mm) 


• Size: 8-11 

Code: 303069 

Pair



CATEGORY III 

TYPE 5 

EN 1073-2 

CLASS 1 

TYPE 6 

EN 1149-5-2008* 

CATEGORY III TYPE 5-B TYPE 6-B 

DuPont Tyvek ® 

200 Easysafe 

CAT. III, TYPE 5/6 

Soft and comfortable coverall. High 

robustness and breathability. 

Polyethylene non-woven fabric 


• Cartons of 25 

• Colour: White 

Manufacturer’s code: TS CHF5 S WH DE 

Code: 430912 

EN 1073-2 

CLASS 2 

EN 1149-5 

EN 14126 

DuPont Tyvek ® 500 Xpert 


Coverall with 3-piece hood. Ergonomicprotective 

design. Stitched external 

seams. Elasticated wrists, ankles and 

face. Elasticated waist (glued-in). 

Tyvek ® zipper and flap. White. Antistatic 



Manufacturer’s code: TY CHF5 S WH XP 

Code: 382104 

CATEGORY III TYPE 4-B 

TYPE 5-B TYPE 6-B 

EN 14126 EN 1149-5 


NT470 CT 


EN 388: 2016 2001X 

Resistant to a range of solvents, oils, hydrocarbons, 

animal fats, greases and other chemicals. Bisque 

finish allows secure handling in wet and dry 

conditions. Unlined, with an ergonomic design 

to maximise comfort. 

• 100% nitrile - Unlined 



• Colour: Green 

• Size: 6-11 

Code: 303075 

Pair 

EN 1073- 

CLASS 2 

DuPont Tyvek ® 600 Plus 


Coverall with 3-piece hood. Stitched 

and over-taped seams. Thumb loops. 

Tunnelled elastication at wrists, ankles 

and face. Elasticated waist (glued-in). 

Tyvek ® zipper. Self-adhesive zipper and 

chin flap (for tight fit around respirator). 

White. Antistatic 


• Colour: White with Blue 

overtaped seams 

Manufacturer’s code: TY CHA5 T WH 00 

Code: 382114 


NT470 CT 


EN 388: 2016 2021X 

Double-dipped neoprene over natural rubber for 

dexterity. Resistant to a wide range of chemicals 

• Neoprene over natural rubber - cotton flock 



• Colour: Black/blue 

• Size: 7-10 

Code: 303085 

Pair 

17



CATEGORY III TYPE 5 TYPE 6 EN 1073-2 EN 1149-1 



18 

3M 4540+ Protective Coverall 

CONFORMS TO CATEGORY 3, TYPE 5 & 6, 

EN 1073-2, EN 1149-5 

Draping laminated material offering good protection 

against dust and light liquid splashes. Breathable back 

panel for reduced heat stress. Elasticated waist and 

ankles. Knitted cuff. 3 panel hood. 2 way zipper with 

sealable storm flap 



Manufacturer’s code: 4540+ 

Code: 382042 

3M 4530 Protective Coverall 


EN 1073-2, EN 1149-5 

Excellent chemical and particulate holdout, with limited 

liquid splash 

protection. Lightweight & breathable whilst offering 

protection against hazardous dust and limited liquid 

splash. Material compliant to EN 14116 index 1 (must 

be worn over index 2 or 3 garments). Knitted cuffs, 

elasticated waist and ankles. 3 panel hood. Low linting. 

2 way zipper and sealed flap 

• Packed in cartons of 20 


• Colour: Blue 

Manufacturer’s code: 4530 

Code: 382041 

3M Protective Coveralls 4532+ 


EN 1073-2, EN 1149-5 

Unique liquid repellence with oil and alcohol resistance 

material treatment. Soft and strong multi-layered 52gsm 

SSMMS for strong performance. Made from super 

breathable SSMMS non-woven for effective release of 

body heat and moisture and reduced heat stress. 3 

panel hood, reinforced triangular gusset panel, 2-way 

zip and storm flap with sealable tape, elasticated back 

and ankles 



(Also available in blue) 


Code: 382048

Disposable Coats & Accessories 


Tyvek ® 500 Hood 

CAT III TYPE PB6 

Flange assembled with 

the overcasting. Elastic 

around neck and face. 

Inside seams 

• Size: One size fits all 



Manufacturer’s code: PH30LO 

Code: 431981 

Tyvek ® 500 Sleeve 

Elasticated both ends 

• Size: 50cm (18") 

• Cartons of 200 Pairs 


Manufacturer’s code: PS32LA 

Code: 431982 

Tyvek ® 500 Boot Cover 

with Antislip 

Slip retardant sole. Leg ties. 

Anti-static treatment 

• Size: One size only 

• Height: 48cm 

• Cartons of 200 Pairs 


Manufacturer’s code: POB0 

Code: 431984 

Tyvek ® 500 Lab Coat 

with Zipper and Pockets 

CAT III PB6 EN 14126 

Collar, zip and two pockets. 

Inside seams 

• Size: S-XL 



Manufacturer’s code: PL309 

Code: 431953 

Tyvek ® 500 

Shoe Cover 

New stitched-in slip 

retardant sole. 

Anti-Static Treatment 

(EN11491-1) 

on both sides 

• Size: one size only 



Manufacturer’s code: POS0 

Code: 431983 

19


Food Industry Disposables 

Cater Safe is a comprehensive range of disposable workwear ideally suited to the food industry. The range encompasses 

hats, caps, coats, beard masks, aprons, sleeves and overshoes, with most available in a variety of colours. 

Cater Safe Disposable Apron 

Pack of 100 disposable aprons in poly pack. 

Manufactured from opaque polythene 

• Size: 690×1066mm (27×42") 

Colour: White 

Code: 343230 

Colour: Blue 

Code: 343231 

Colour: Red 

Code: 343233 

Colour: Green 

Code: 343232 

Colour: Yellow 

Code: 343234 

Cater Safe Visitor’s Coat 

Standard size polythene coat. Front popper fasteners. 

Individually packed in pocket size sachet 

• Size: One size 


Colour: White 

Code: 3432146 

Colour: Blue 

Code: 300156 

Cater Safe Disposable Oversleeves 

Low density polyethylene (LDPE). 

Enclosed elastication both ends 

• Size: 16" in length 


Colour: Blue 

Code: 343106 

Colour: Red 

Code: 343109 

Colour: Green 

Code: 343108 


Code: 343110 

KeepCLEAN Vinyl Powder-Free 

Disposable Gloves 

Smooth exterior, beaded cuff. Powder free. Approved 

for food use. Dispenser box 


• Box of 100 


KeepCLEAN Vinyl Powdered 


Smooth exterior, beaded cuff. Lightly powdered. 

Approved for food use. Dispenser box 


• Box of 100 


Cater Safe 

Non-Woven 

Coat 

Non-woven material. 

Press stud fasteners, 

no pockets. 

Individually packed 

in polybags for 

improved hygiene 




Code: 304661 

Code: 304663 

Colour: Clear 

Colour: Blue 

Code: 304997 

Code: 304994 

Code: 304576 

Code: 304577 

Colour: Clear 

Colour: Blue 

Colour: Red 

Colour: Green 

Code: 300102 

20

Food Industry Disposables 


Cater Safe Unisex Hairnet Metal Clipped 

(Detectable) 

Comfortably controls hair. Gives product protection. 

Metal detectable. Coarse mesh 

• Pack of 100 

Coarse mesh 

Colour: Blue 

Code: 300460 

Close Mesh 

Colour: Blue 

Code: 300461 

Unisex Hairnet Metal Free 

Close Mesh 

Colour: Blue 

Code: 300477 

Cater Safe Pleated Mob Caps 

Soft, lightweight, total head cover. Double stitched, fully 

elasticated. Non-woven fabric 



Colour: White 

Code: 3001181 

Colour: Blue 

Code: 300111 

Colour: Red 

Code: 300113 

Colour: Green 

Code: 300112 

Cater Safe Balaclava with Eye Slit 

Lightweight breathable hood. Short neck, eyeslit, 

elasticated hem. Polyester warpknit fabric 


Colour: White 

Code: 300202 

Colour: Red 

Code: 300201 

Colour: Blue 

Code: 300204 

Cater Safe Disposable Beard Mask 

Soft spun bonded non-woven fabric 

• Size: Standard 




Code: 382514 

Cater Safe Fine Mesh Beard Snood 




Code: 300455 

Cater Safe Disposable Overshoes 

Tough hard wearing CPE. Elasticated top 

• Case of 100 

Size: 36mm (14") 

Colour: Blue 

Code: 149003 

Size: 40mm (16") 

Colour: Blue 

Code: 300155 

KeepCLEAN Latex Powder-Free 


Approved for use in food preparation. 

100% natural latex. 

Dispenser box. Ambidextrous 


• Box of 100 


• Colour: Natural 

Code: 304671 

KeepCLEAN Latex Powdered 


Approved for use in food preparation. 

100% natural latex. Dispenser box. Ambidextrous 

• Box of 100 


Size: S-XL 

Colour: Natural 

Code: 015031 

Size: S-L 

Colour: Blue 

Code: 015030 

21

Clothing & Workwear 

DURABLE 

COMFORT 

VALUE 

ENDURE 

Day in, day out, you 

work in harsh and 

dirty conditions, and 

you need something 

that can withstand 

the hard work that 

you do. That's where 

Endurance comes in, 

offering a range of 

workwear to meet 

any eventuality! 

• Softshell jackets 

• Sweatshirts 

• Fleeces 

• Bodywarmers 

• Polo shirts 

• T-shirts 

22 

We've got 

you covered!



23


Polo Shirts, T-Shirts & Sweatshirts 

Helly Hansen Chelsea Evolution T-Shirt 

Rich cotton feel. Regular fit. Main: 57% Cotton, 

38% Polyester, 5% Elastane - 160 g/m² 


Colour: Black 

Code: 432786 Manufacturer’s code: 79198-990 

Colour: Grey Melange 


Helly Hansen Oxford Polo T-Shirt 

Flatlock stitching with contrast colour. Two button 

opening. Main: 100% Cotton - 210 g/m 2 


Colour: Black 


Colour: Navy 




Helly Hansen Oxford Sweatshirt 

Flatlock stitching with contrast colour. Main: 100% 

Cotton - 310 g/m 2 


Colour: Black 


Colour: Navy 




NEW 

GREAT VALUE 

Endurance 

Polo Shirt 

Traditional polo shirt. 

50/505 polycotton 

220g/m 2 honeycomb 

pique fabric. 

Rib flat-knit collar 


Colour: Dark Navy Code: 193664 

Colour: Black Code: 192770 

Colour: Heather Grey Code: 192777 

Colour: Red Code: 362676 

Colour: Sky Blue Code: 192774 

Colour: Royal Blue Code: 362677 

Colour: Bottle Green Code: 192769 

Colour: Charcoal Code: 192787 

Endurance Sweatshirt 

Traditional sweatshirt style with 

hardwearing workwear features. 

65/35 polycotton fleece 

sweatshirt 300g/m 2 . Knitted 

rib neckline, sleeve cuffs 

and hem for fit and style 


Colour: Navy 

Code: 368250 

Colour: Black 

Code: 192793 

Colour: Heather Grey 

Code: 193669 

Colour: Royal Blue 

Code: 368251 

Colour: Bottle Green 

Code: 192792 

Colour: Charcoal 

Code: 192810 

24

Trousers 

GREAT VALUE 


Endurance Ballistic Trousers 

Ballistic material from thigh to ankle – extra strength, 

reinforcement. Permanent sewn-in front seams. 

Concealed hook and bar fastening at waist. Two hip 

swing and rear jetted hip pockets. Full width reflective 

bands. 65% polyester, 35% cotton 245g/m 2 

• Size: 30-46" waist 

• Length: Regular Leg-31" 


Code: 380080 

Endurance 

Tradesman Trousers 

A great value combat trouser with 

all the benefits of a traditional work 

trouser. 275gsm 65/35 Polyester 

Cotton fabric. Triple stitched on all 

major seams. Enhanced stain and 

liquid repellent finish. Reinforced 

Nylon external knee pad pockets. 

Elasticated panel on waist for 

enhanced fit. Two rear patch 

pockets with Velcro fastening flaps. 

Reinforced hammer loop and Velcro 

loop for tool belt. Increased size 

phone pocket to suit new larger 

sized smart phones 

Colour: Black 

Size: 30" to 48" Short 

Code: 430023 

Size: 30" to 48" Regular 

Code: 430024 

Size: 30" to 48" Tall 

Code: 430025 

Endurance Work Trousers 

Cargo style pockets. Two front pockets, 

two rear pockets. External knee pad 

pockets. 260g/m 2 polycotton 

• Sizes 30-42" waist 

Colour: Black 

Length: Short Leg (29") 

Code: 380011 

Length: Regular Leg (31") 

Code: 380012 

Length: Long Leg (33") 

Code: 380013 

Colour: Navy Blue 

Length: Short Leg (29") 

Code: 380014 


Code: 380015 


Code: 380016 

For Knee Pads 

see page 35 

Endurance Action Trousers 

260g/m 2 polycotton fabric. Button and 

zip fastening. Multi zipped pockets. 

Kneepad pockets 

• Sizes 30-42" waist 

Colour: Black 


Code: 380017 

Colour: Black 


Code: 380018 



Code: 380019 



Code: 380020 

25


Trousers & Shorts 

Helly Hansen Chelsea 

Evolution Construction Pant 

Cordura ® fabric reinforcement on 

knees | 4-Way Stretch | YKK ® zipper | 

Articulated knees | Hanging pockets. 

4-way stretch: 93% Polyamide, 7% 

Elastane 310 g/sm | Secondary: 79% 

Cotton, 21% Polyester - 295 g/m² | 

Reinforcement: Cordura ® fabric 219 g 

• Size: C44-C62 

Colour: Black 

Manufacturer’s code: 77441-992 

Code: 432776 

Colour: Navy 


Code: 432775 


Evolution Service Pant 

4-Way Stretch. YKK ® zipper. Jeans 

like front pockets. Tonal logos. Cargo 

Pockets. 4-way stretch: 93% Polyamide, 

7% Elastane 310 g/sm | Secondary: 

79% Cotton, 21% Polyester - 295 g/m² 

• Size: C44-C62 

Colour: Black 


Code: 432778 

Colour: Navy 


Code: 432777 

Helly Hansen Oxford 

Construction Pant 

YKK ® zipper. Plastic covered metal 

buttons. Hand pockets. Back pockets. 

Loop with double velcro on both sides for 

hammer holder. Hanging pocket. Thigh 

pocket with flap and velcro closure. 

Ruler pocket. Broad centre back belt 

loop for extra stability & strength. Gusset 

at crotch. Reinforcement at knee and 

bottom leg. Kneepad pockets. Articulated 

knees. 5 cm leg extensions. Main fabric: 

79% Cotton 18% Polyester, 3% Elastane, 

265g. Second fabric: 65% Polyester, 

35% Cotton, 310g. Reinforcement: 

100% Polyamide, 195g. 

• Size: C44-C62 

Colour: Black 


Code: 432798 

Colour: Navy 


Code: 432797 

Helly Hansen Oxford 

Service Pant 

YKK ® zipper. Plastic covered metal 

buttons. Hand pockets. Back pockets. 

Thigh pocket with flap and velcro 

closure. Broad centre back belt loop 

for extra stability & strength. Gusset at 

crotch. Reinforcement at bottom leg. 

5 cm leg extensions. Tonal logos. 

ID card loop. Main fabric: 79% Cotton 

18% Polyester, 3% Elastane, 265g. 

Second fabric: 65% Polyester, 35% 

Cotton, 310g. Reinforcement: 100% 

Polyamide, 195g. 

• Size: C44-C62 

Colour: Black 


Code: 432800 

Colour: Navy 


Code: 432799 


Evolution Construction Short 

YKK ® zipper. 4-Way Stretch. Cordura ® 

fabric reinforcement. Hanging pockets. 


Elastane 310 g/sm. Secondary: 79% 

Cotton, 21% Polyester - 295g/m². 

Reinforcement: Cordura ® fabric 219g 

• Size: C44-C62 

Colour: Black 


Code: 432780 

Colour: Navy 


Code: 432779 


Evolution Service Short 

YKK ® zipper. 4-Way Stretch. Jeans like 

front pockets. Tonal logos. Cargo Pocket. 


Elastane 310 g/sm. Secondary: 79% 

Cotton, 21% Polyester - 295g/m² 

• Size: C44-C62 

Colour: Black 


Code: 432782 

Colour: Navy 


Code: 432781 

Helly Hansen 

Standard Kneepad 

CONFORMS TO EN 14404 

240mm x 147mm x 20mm, Light weight 



Code: 432807Pair 

Helly Hansen 

pant size guide 

Size Waist " Leg " HH Ref 

XS 30 30.5 C44 

S 31 31.5 C46 

M 33 32 C48 

M + 34 32 C50 

L 36 32.5 C52 

L + 38 33 C54 

XL 39 33.5 C56 

XL + 41 34 C58 

2XL 42 34 C60 

2XL + 44 34.5 C62 

3XL 45 34.5 C64 

26

Fleeces & Bodywarmers 


Endurance Unisex Lined Fleece Jacket 

310g/m 2 anti-pill fleece, fully lined with microfibre 

windproof fabric. Provides extra warmth. Two hip 

pockets. Full zip front, drawcord hem 


• Colour: Navy Blue 

Code: 342485 

Endurance Unisex 

Heavyweight Fleece Jacket 

380g/m 2 100% polyester anti-pill fabric. Elasticated 

cuffs. Full length coloured zip. Two zipped waist-level 

pockets. Elasticated pull cords and toggles 



Code: 342482 

Endurance Fleece Jacket 

2 lower zipped pockets. Elasticated cuff and hem 

Size: S-2XL 

Colour: Dark Navy 

Code: 305621 

Size: S-2XL 

Colour: Black 

Code: 305601 

Helly Hansen Oxford Light Fleece Jacket 

Polartec ® Recycled fleece | YKK ® centre front zipper with back placket | Chin 

guard | YKK ® hand pockets zipper | Extended back for better comfort. 

Main: 100% Polyester - 159g/m² 

• Size: XS-4XL 

Colour: Black 


Colour: Dark Grey 


Colour: Navy 


Helly Hansen Oxford Fleece Jacket 

Polartec ® fleece. YKK ® centre front zipper with back placket. Chin guard. YKK ® 

chest pocket zipper. YKK ® hand pockets zipper. Extended back for better comfort. 

Main: 100% Polyester - 251g/m² 


Colour: Black 


Colour: Dark Grey 


Colour: Navy 


27


Jackets 

Helly Hansen Chelsea Evolution Stretch Midlayer 

Centre front YKK ® zipper. YKK ® hand pockets zipper. Elastic draw cord bottom 

hem. Main: 94% Polyester, 6% Spandex - 280g/m² 


Colour: Black 


Helly Hansen Chelsea Evolution Hoodie 

Centre front YKK ® zipper. YKK ® hand pockets zipper. Elastic draw cord bottom 

hem. Main: 94% Polyester, 6% Spandex - 280g/m² 


Colour: Black 




Helly Hansen Chelsea Evolution Hooded Softshell Jacket 

4-Way stretch at centre back for max comfort. No shoulder seams. Articulated 

sleeves. Extended back for max comfort. YKK ® centre front zipper with back 

placket. YKK ® chest pocket zipper. Hole for headphone cord inside chest pocket 

YKK ® hand pockets zipper. Cuffs with velcro adjustment. Draw cord adjustment 

at hood. Bottom hem adjustment. ID card loop. Main fabric: Face: 94% Polyester, 

6% Elastane, 305g. Second fabric: 93% Polyamide, 7% Elastane, 310g 


Colour: Black 


Colour: Navy 


Endurance Water Repellent 

Softshell Jacket 

Two lower zipped pockets. One zipped upper pocket 


Colour: Navy Blue Code: 342587 


28

Coverall & Bib & Brace 

Endurance Cotton Drill Stud Coveralls 

100% cotton.Traditionally styled. Concealed stud 

front fastening. Elasticated back. Two side swing (plus 

access), breast, and rule pockets 



Code: 371004 


Endurance Polycotton Stud Coveralls 

Polycotton, for multiple washing – less shrinkage, holds colour well. 

Traditionally styled. Concealed stud front fastening. Two stud-fasten 

breast, two side swing (plus access), and rule pockets 


• Length: Regular Leg 


Code: 371203 

GREAT VALUE 

Endurance Bib & Brace 

Hard wearing bib and brace. 80/20 

polycotton. Front bib pocket. Large front 

waist pocket with button closure. Button 

closure at fly. Elasticated waist 


Colour: Navy 

Code: 371020 

Colour: White 

Code: 371021 

29

d 

Stand 



Ladies Workwear 

Ladies Coolviz High-Visibility 

Polo Shirt 

130gm 100% Polyester Birdseye. Mesh ventilated under 

arms and side seams. Segmented reflective tape. 

3 Button placket with contrast fuchsia lining. 

Split hem design 



Code: 014207 

Ladies High-Visibility 

Combat Trouser 

280gm polyester/cotton with stain-repellent finish. 

Specifically designed for the female wearer. Triple 

stitched inner and outer leg seams. Cargo style thigh 

pockets. Part elasticated waist 

• Size: Ladies’ size 8-26 


Code: 015348 – Short 

Code: 015347 – Regular 

Code: 015349 – Tall 

KeepSAFE Pro Ladies Executive 

Sleeveless Waistcoat 

CONFORMS TO EN ISO 20471. 

Zipped front. ID pocket. Women’s fit. Shaping at 

hem for easy access to trouser pocket 


Colour: Saturn yellow 

Code: 305289 


Code: 015213 

3 

EN 471: ISO: 

2003 20471:2013 

20471:2016 +A1:2007 

3 

EN 471: 343 

2003 +A1:2007 

FABRIC ONLY 

GO/RT 3279 


KeepSAFE Ladies EN 471 

High Visibility Safety Jacket 

PU coated breathable waterproof fabric, 

with collar-concealed hood. 

Rear side vents. Two outer, two internal, 

and map pockets 



Code: 321157 

30 

Ladies’ Executive Long Sleeved Waistcoat 

CONFORMS TO EN ISO 20471 XS-M CLASS 2/L-6XL CLASS 3 

Zipped front. ID pocket. Women’s fit. Shaping at hem 

for easy access to trouser pocket 



Code: 015214 


Code: 015217 

Hannaford Women’s 

Waterproof & Breathable 

Trousers 

CONFORMS TO EN20471 

CLASS 2 AND EN343 3:3 RIS- 

3279-TOM (ORANGE ONLY) 

Waterproof, windproof 

and breathable women’s 

overtrouser. Elasticated 

waist with shock cord 

adjuster. Half leg side 

opening with YKK ® zips. 

Velcro ® ankle adjust tabs 

• Size: Ladies’ 

size 8-26 


Code: 305257 


Code: 305258

Ladies Workwear 


Endurance Ladies Polycotton Polo Shirt 

Contemporary ladies cut. Knitted collar, open hem sleeve, side vents. 

50% polyester, 50% cotton 220g/m 2 



Code: 362183 

Colour: Red 

Code: 012196 

Unisex Heavyweight Fleece Jacket 

Classic and substantial; 380g/m 2 anti-pill polyester. Elasticated cuffs. Full length 

coloured zip. Two zipped waist pockets. Elasticated pull cords and toggles 



Code: 342482 

Endurance Action Ladies Trousers 

Part elasticated, button fastening waistband. 

Knee patches. Multi-pocketed. Action Trouser 

in Women’s fit 

• Length: Regular Leg (29") 

Size: Ladies’ size 8-20 

Colour: Black 

Code: 320263 

Size: Ladies’ size 10-20 


Code: 320245 

Endurance Pro Women's Softshell Jacket 

Bonded stretch 100% polyester fabric, wind resistant and water repellent. 

2 zipped side pockets. Elastic/stopper at hemline. Stand up collar. 

Raglan sleeve for improved female fit 



Code: 018558 

31


Weatherwear 

Endurance Thermals 

Manufactured in poly-viscose 

for warmth, softness, comfort 

and durability – ideal for cold 

conditions indoors or out. 

Soft brushed inner. Machine 

washable. 50% polyester, 

50% viscose 



Vest Long Sleeved 

Code: 384287 

Vest Short Sleeved 

Code: 384285 

Long Johns 

Code: 384289 

EN 471: 

2003 +A1:2007 

EN 343 

3 

2 

FABRIC ONLY 

KeepSAFE EN 471 



CONFORMS TO 

EN 471 CLASS 3 

PU coated breathable, waterproof 

outer fabric tested to EN 343, with 

hood and stud adjustment at wrist 


• Two side pockets with Velcro ® flaps 



Code: 321170 

KeepSAFE EN 471 High Visibility 



PU coated breathable, waterproof 

outer fabric tested to EN 343, with 

fully taped seams. 

• Elasticated waistband 



Code: 321171 

32 

Flexothane ® Classic 


CONFORMS TO EN 343 CLASS 3-2 & EN 340 4820 

Fold-away hood in collar. Zip and stud closure. Stud/ 

elastic sleeve narrowing. Underarm ventilation. Two 

patched pockets 



Code: 343539 


Code: 343570 

Colour: Green 

Code: 343526 



CONFORMS TO EN 343 CLASS 3-2 4500 

Elasticated waist. Ankle stud adjustment 



Code: 343562 


Code: 343571 

Colour: Green 

Code: 343528

Weatherwear 

GREAT VALUE 

Endurance 

Rainmaster 

Two-Piece Suit 

Double coated PVC on polyester. Welded main seams. 

Draw string hood. Two flapped patch pockets. 

Elasticated waist trousers. Stud fastening ankle 



Code: 342401 


TOECAP 

WATER 

RESISTANT 

ANTISTATIC 

MIDSOLE 

SRC 

Rock Fall RF001 Alaska Freezer Safety Boot 

CONFORMS TO EN ISO 20345:2011 S3 CI HRO SRC + ASTM F 2413-18 M/I/C PR 

Protective toecap and midsole, Alaska is a cold temperature boot developed 

with specialist materials that are certified for us in temperatures as low as -40°C, including 3M Thinsulate B600 

Ultra, Fursulate fur lining and a shock absorbing solid nitrile rubber outsole. Water repellent full grain black leather. 

Protective fibreglass toecap and composite anti-penetration flexi-midsole. 3M Thinsulate B600 Ultra fur lining - 

certified to -40°C. Shock absorbing nitrile rubber outsole. Anti-fatigue fur EVA footbed 

• Size: UK 3-14 


Code: 100007 

Manufacturer’s code: RF001 


Waterproof Coverall 

CONFORMS TO EN 343 CLASS 3-1, EN 340, 

EN 14605 TYPE 4, & TESTED TO EN 14786 4964 

Fold-away hood in collar. Zip under double flap, 

stud closure. Elasticated back, wind cuffs. 

Ankle stud adjustment 



Code: 343609 

Colour: Orange 

Code: 343622 

Colour: Royal Blue 

Code: 015457 

3M First Base 3 Bump Caps 

The 3M First Base 3 Bump caps covers a wide range of needs and applications, from high visibility with 

reflectives, to warm winter lined versions, advanced ventilation or extra impact protection. These bump caps 

protect the wearer from light contact with stationary objects. Various peak lengths and colours are available 

Colour: Black – Reduced Peak 

Code: 279031 Manufacturer’s code: 2030610 

Colour: Navy Blue – Reduced Peak 


Colour: Red – Reduced Peak 


33


Weatherwear 

Endurance Rainmaster 

Lightweight Two-Piece Suit 

Lightweight, waterproof polyester/PVC. 

Taped seams, mesh 

vented back. Hood folds away into collar. 

Two front pockets 




Code: 342420 

KeepSAFE Hi-Vis Latex Coated Glove 


Seamless high visibility cotton/acrylic base for warmth. 

Latex coating gives maximum grip in wet and dry 

conditions. Excellent for low light work environment 

• Size: 8-10 

• Colour: Saturn Yellow/Black 


2132X 


Endurance Rainmaster 

Lightweight Trousers only 

Lightweight, waterproof polyester/PVC. 

Taped seams, elasticated waist 



Code: 342430 

34 

Skytec Argon Cold Weather Glove 

Double insulated nylon liner with HPT foam ¾ coating. 

Durable and flexible to -50°C. Provides thermal 

protection from cold and wintery conditions. ¾ dipped 

for added weather repellence, making it the ideal cold 

weather mechanical handling glove. HPT foam coating 

extends across the palm, knuckles and fingers. Soft 

lining. Secure grip. Encapsulated air molecules 

provide an inherent cushioning effect. 

Silicone-free 

• Size: 7-10 



X2X 

3231X 

Code: 304402Pair

Knee Pads 

Continuous pressure on the knee due to working in a kneeling position may lead to chronic conditions, such as bursitis 

injuries to the cartilage. As well as helping prevent cumulative trauma, knee pads help protect against injuries and 

inflammation caused by hard surfaces, pieces of gravel, and similar objects on the ground. 

GREAT VALUE 


Knee Pads 

For use with Tuf Revolution and 

Endurance Knee Pad Trousers 



Premium Hard Shell Knee Pads 


Long-term protection from cumulative trauma injuries. 

Hinged action hard shell, ribbed flat kneeling surface. 

Premium moulded foam. Breathable. Coolmax ® inner 

lining. Dual elastic straps, hook and loop closure 



Helly Hansen Standard Kneepad 


240mm x 147mm x 20mm, Light weight 




Heavy Duty Knee Pads 

Soft, lightweight protection for all-day comfort. Moulded 

from toxin free premium foam. Breathable Coolmax ® 

inner lining. Single, replaceable elastic strap; hook 

and loop closure 




Endurance Gel Knee Pads 

Hook and loop fastener. Elastic adjustable strap 



Rubber Knee Pad 

Protection from abrasion and cumulative trauma; great 

for heavy duty industrial and construction applications 

and wet environments. Anti-slip ribbed surface. 

Easy on/off replaceable 1" rubber strap/plastic buttons 



35

Hand Protection 

36 

Buying Guide 

Health & safety for 

your hands 

Hands at work are extremely vulnerable to 

a wide range of hazards which include cuts, 

blows, chemical attack and temperature 

extremes. With industry’s increasingly 

complex and sensitive manufacturing and 

handling processes, there is a growing 

insistence on the use of “job fitted” gloves 

that meet each user’s specific requirements. 

The importance of 

glove maintenance 

Contaminated and damaged gloves may fail 

to protect the hands from the very hazard 

they were designed for. Effective protection 

is maintained by regular replacement of the 

gloves. Check the condition of the gloves, 

inside and out before use.. 

Safety standards symbols 

and what they each 

represent 

What to look out for 

Each glove has its own individual 

rating for each standard it qualifies 

EN 388 for. Against each product there will 

be a prominent ‘standards box’ 

(as per the example shown on the 

4X42B right) clearly displaying the particular 

safety standards that the glove 

complies with. 

This will help you quickly see what you need 

to know about the glove, helping you shop 

more efficiently. 

Your guide to safety 

standards and choosing the 

right hand protection 

European Standards 

Implies that the gloves comply with the 

basic requirements laid down by the EC 

Regulation: Personal Protective Equipment. 

Simple Design (Category I) 

For areas of ‘minimal risk’ where the 

effects of not wearing a glove are easily 

reversible or superficial. Such products are 

self-certified. 

Intermediate Design (Category II) 

For areas of specific risk i.e. mechanical 

risks. Such products will have been EC type 

tested against European test methods and 

certified by a notified body. 

Complex Design (Category III) 

For areas/applications that can seriously or 

irreversibly harm the health. Such products, 

in addition to the CE type test, will also 

have to be either produced under an 

approved quality system OR be type tested 

on an annual basis. 

What the symbols represent 

JKLOPT 

JKL 

EN 388 – This standard applies to all kinds of protective gloves giving 

protection from mechanical risks, in respect of physical problems caused 

by abrasion, blade cut, tearing, puncture or impact. This standard also 

covers risk of electrostatic discharge. 

EN ISO374-5:2016 – Gloves have been tested for penetration (leakage) 

using test method in EN 374-2:2014 but do not need to be tested 

against chemical permeation. If the word VIRUS appears under the 

symbol, this signifies protection against bacteria, fungi and viruses. If the 

word Virus is not present, then only protection against bacteria and fungi 

is claimed. Such gloves may not protect against all viruses. 

EN ISO374-1:2016/Type A – The permeation performance shall be at 

least level 2 (minimum 30 mins breakthrough time) against a minimum 

of 6 test chemicals. 

EN ISO374-1:2016/Type B – The permeation performance shall be at 



EN ISO374-1:2016/Type C – The permeation performance shall be at 



EN 511 – This standard applies to gloves which protect the hands 

against convective and contact cold. 

EN 407 – This standard specifies thermal performance for protective 

gloves against heat and/or fire. 

EN 659 – This standard defines performance requirements for gloves 

designed to protect fire fighters against heat and flames. 

EN 421 – This standard lays down test methods and performance 

criteria for gloves offering protection against ionising radiation and 

radioactive contamination. 

EN 455 – Medical gloves for single use. 

If a glove is to be used for food handling, it is required to carry either the 

words ‘for food use’ or this symbol. 

What the numbers represent 

Contact Heat 

A sample is taken from the palm area of a glove. The outside of the glove is put 

on a hot surface and the temperature of the inside of the glove is then monitored. 

The temperature on the inside of the glove must take 15 seconds or more to rise 

by 10°C from room temperature. 

EN 407 Performance 

Level 

3243AP 

A B C D 

Mechanical Hazards: EN 388 

Performance Level 

(a) Abrasion resistance 0-4 

(b) Blade-cut resistance 0-5 

(c) Tear resistance 0-4 

(d) Puncture resistance 0-4 

(e) Straight blade cut (TDM) resistance A-F (f) Impact resistance P if passes 

An “X” can be shown in place of any of the first 5 digits underneath the 

pictogram, where the test was either not carried out, not required or not suitable. 

The same method applies to these two standards below also. 

Thermal Hazards: EN 407 


(a) Burning behaviour 0-4 

(b) Contact heat 0-4 

(c) Convective heat 0-4 

(d) Radiant heat 0-4 

(e) Small splashes of molten metal 0-4 

(f) Large splashes of molten metal 0-4 

Contact 

Temperature °C 

1 100 >15 

2 250 >15 

3 350 >15 

4 500 >15 

Threshold Time 

Seconds 

EN 511: Cold 


(a) Resistance to convection cold 0-4 

(b) Resistance to contact cold 0-4 

(c) Permeability to water 0-1 

TAKE NOTE... 

CHANGES ARE HERE 

CHANGES TO EC STANDARD EN 388 

During 2016 a new version of EN 388, Protection against 

Mechanical Hazards, was published. It allows products 

offering higher classifications of cut levels to be identified. 

What changed 

Any sample tested for cut resistance using the existing 

coup method, which blunts the blade used in the test, will 

have to be additionally tested using the ISO cut method. 

LEVEL 

A 

LEVEL 

B 

LEVEL 

C 

LEVEL 

D 

LEVEL 

E 

LEVEL 

F 

2 5 10 15 22 30 

Back of hand protection (impact protection testing) is 

now included. 

3 means the sample achieved 

level 3 for abrasion 


level 4 for coup cut 


level 4 for tear 

3443AP 3 means the sample achieved 

level 3 puncture 

A means the sample achieved level A for ISO cut which 

was tested due to blade blunting during the coup test 

P means the sample passes requirements for impact 

protection 

What it means to you 

• This change only affects new products being certified 

once the standard has been published 

• As with any new PPE standard, it does not apply 

retrospectively 

• Over the next few years, you will see more and more 

products carrying this standard 

• It will allow products offering higher levels of cut 

protection to be identified 

• EN420: General requirements for Protective Gloves – 

New Test Method being added (prEN 16778) for the 

determination of the presence of Dimethylformamide 

(DMF), a toxic ingredient of insecticide sometimes used in 

the leather tanning process



37


Lightweight & PU Coated Gloves 

Polyurethane coating is a flexible, synthetic material that helps protect hands from harmful residues and chemicals 

while providing excellent grip, tactile sensitivity and abrasion resistance. 

Applications include hi-tech, electronic, small parts assembly, automotive sub-assembly, light fabrication, 

micro-engineering, packaging, inspection, light industrial, horticulture, and general plant use. 

ALL THESE GLOVES CONFORM TO EN 388 INTERMEDIATE DESIGN 

Polyco Matrix ® P Grip PU Coated Glove 

Seamless knitted liner with polyurethane palm coating. Open back style allows 

the hands to breathe, keep cool and comfortable. Close fitting design for 

maximum dexterity 

• Size: 6-11 


Manufacturer’s code: 40/1-5 MAT 

Code: 303183 

3131X 

Pair 

Ansell Hyflex ® 11-618 PU Palm Coated Glove 

Nylon with PU and 18-gauge knitting technology, ultra-thin glove for most delicate 

handling. Ideal for workers who need a high level of touch and precision 

• Size: 6-11 



Code: 304591 

3121X 

Pair 

38 

Skytec Ninja Lite 

Ultra lightweight (18g). Protects the hand from oils, grease 

and abrasion, with effective grip. Ideal for intricate tasks 

and for preventing product contamination. Maximum 

flexibility and movement for the most intricate of tasks. 

Breathable, seamless liner. Elasticated wrist provides 

a secure and comfortable fit. Lint free, reducing 

the risk of product contamination 

• Size: 8-10 


3121X 

Code: 303265 

Pair 

KeepSAFE PU Coated Glove 

Ideal for packing, inspection, fine component assembly, 

delicate and precise operations. Excellent levels 

of dexterity. Seamless liner, no seams against 

worker’s hand 

• Size: 7-10 


Colour: Grey 

Code: 303052 

Size: 8-10 Colour: Black 

Code: 303055 

3121X 

Pair 

Pair 

Honeywell Perfect Poly 

PU Coated Glove 

Ideal for automotive assembly and fine component 

handling. Excellent dexterity, strong abrasion. 

Lightweight polyamide knitted glove. 15 gauge 

• Size: 6-10 

• Colour: Black/Grey 



Code: 303064 

4121X 

Pair

Nitrile Coated Gloves 

Durable synthetic rubber (Nitrile) provides excellent cut, slash, snag, puncture and abrasion resistance, while offering 

superior dexterity and grip; suitable for parts assembly or handling, automotive assembly or repair, and oil refineries. 

ALL CONFORM TO EN 388 INTERMEDIATE DESIGN 


Juba ® Smart Tip Nylon ® with Foam Nitrile Coated Glove 

H4120 - SMART TIP technology allows handling touch screens using the index, 

thumb and middle finger while keeping the glove on. Light and flexible. Very 

ergonomic, seamless glove. Nitrile technology gives breathability. Provides good 

grip in oily conditions 

• Size: 7-10 

• Colour: Orange/Black 


Code: 304422 Manufacturer’s code: H4120 Pair 

3121X 

KeepSAFE Pro Nitrile Foam Palm Coated Glove 

Manufactured using T-Touch technology that is environmentally friendly 

• Nitrile finish in combination with waterbased polyurethane; gives good 

protection in dry, wet or slightly oily applications 

• Excellent abrasion resistance while still being lightweight and flexible 

• Size: 8-10 

• Colour: Red/Black 

4121X 


KeepSAFE Nitrile Coated Knitted Glove 

For light handling, or where high degree of dexterity required 

• Size: 8-10 


Colour: Grey 

Code: 303029 

Colour: Black 

Code: 304061 

4121X 

Pair 

Pair 

Honeywell Polytril Mix Nitrile Coated Glove 

Knitted polyamide/cotton – comfort and effective properties against cuts. 

Outstanding abrasion resistance. Impermeability to oils. Rough nitrile coating 

• Size: 6-10 



4232X 

Code: 303163 Manufacturer’s code: 2232233 Pair 

39



Durable synthetic rubber (Nitrile) provides excellent cut, slash, snag, puncture and abrasion resistance, while offering 

superior dexterity and grip; suitable for parts assembly or handling, automotive assembly or repair, and oil refineries. 


SHOWA 265R Assembly Grip Nitrile Palm Coated Glove 

Lightweight and resistant to deformation. Protects from oils, hydrocarbons, grease 

and abrasion, with effective grip. Designed for easy movement and continuous wear. 

Seamless liner prevents irritation 

• Size: 6-9 


Code: 304416 Manufacturer’s code: 265R Pair 

3131X 

Ansell ActivArmr ® Hycron ® Fully Coated Knitwrist Glove 

Made for heavy-duty jobs involving rough, abrasive materials. Heavy-duty nitrile coating 

provides excellent dry grip as well as superior performance when handling rough, 

abrasive materials. Excellent resistance to snags, punctures, abrasions, cuts, greases 

and oils. Antistatic to EN1149 

• Sizes: 8-10 


4X21B 

Code: 304601 Manufacturer’s code: 27-602 Pair 

40 

Ansell Hyflex ® 11-840 

Breathable Foam 

Nitrile Glove 

Extreme durability and superior fit for precision handling 

in abrasive applications. Tough 1.1mm FORTEX ® nitrile 

foam coating. Second-skin liner for more comfort, 

cooler, drier hands. Silicone-free material 

• Size: 6-11 

• Colour: Black/Grey 

4131A 


SHOWA 370 Palm Fit Assembly Grip 

Nitrile Coated Glove 

Lightweight and resistant to deformation. 

Protects from oils, grease and abrasion, with effective 

grip. Ideal for precision assembly tasks. Breathable 

back of hand to reduce perspiration. Antibacterial and 

anti-odour treatment 

• Seamless liner prevents irritation 

• Size: 5-10 


4121X 


Honeywell Nitrifit Fully 

Coated Glove 

Increased water resistance – fully nitrile coated. 

15-gauge knitted nylon 

• Size: 7-10 



4121X 

Code: 303156 Manufacturer’s code: 2232236 Pair


ALL CONFORMS TO EN388 INTERMEDIATE DESIGN 


Ansell ActivArmr ® Hycron ® 27-600 


A big tough glove for a rough, tough life: three times 

more durable than heavy-duty leather. Superior 

resistance to sharp and abrasive materials. Stronger 

and more flexible than PVC. Excellent barrier to 

grease and oil. Made without silicone. 

Antistatic to EN1149 

• Size: 8-10 

Code: 304606 

4X21B 

Manufacturer’s code: 27-600 Pair 

Ansell ActivArmr ® 47-200 


The coolness and comfort of cotton - but with far 

superior grip. Makes it easier and safer to handle 

smooth objects like boxes or appliances. Coating only on 

fingers and palm. Nitrile coating repels oil and grease. 


• Size: 7-10 


2111A 


Ansell Hynit ® 32-105 

Nitrile Fully Coated Glove 

Liquid repellent. Excellent protection against 

abrasions and low cuts. Remarkable flexibility. 

Interlock knit liner. 

Length: (7-7½) 215mm, (8-0) 235mm 

• Size: 7-10 

Code: 304640 

3111A 

Manufacturer’s code: 32-105 Pair 

BEST SELLER 

Ansell Hyflex ® 11-800 

Nitrile Foam Coated Glove 

Micro-porous nitrile coating on a seamless 

liner for delicate, precise handling – packaging, 

automotive, electronics. Antistatic to EN1149 

• Size: 6-10 

3131A 

Colour: 11-800 White/Grey 


Colour: 11-800 Grey/Black 


KeepSAFE Nitrile Foam Coated Glove 

Excellent grip in wet, oily or dry conditions. Seamless nylon liner, 

exceptional dexterity and sensitivity 

• Size: 7-10 

• Colour: Grey/Brown 

Code: 303008 

4121X 

Pair 

41



Providing excellent grip in oily or greasy applications, air infused nitrile coating absorbs oils better than flat coating, 

while maintaining the latter’s cut, tear and abrasion resistance. Ideal for dry or slightly oily applications that require light 

mechanical protection and high levels of handling finesse, foam gloves are well-suited to light assembly applications 

(automotive, plastics, textiles, finished goods) as well as logistics and warehousing. 


Juba ® Agility Nitrile 

Foam Coated Glove 

Nitrile dots finish to improve grip. Foamed nitrile 

channels oils and liquids away from surface. 

Superb wet grip. Outstanding abrasion resistance 

• Size: 8-10 

• Colour: Black/Red Dots 

4121X 

Juba ® Econit Nitrile 


Excellent grip in dry, wet and oily conditions. Nitrile foam 

channels oils and liquids away from surface. 

15 gauge Nylon & Lycra liner for maximum ergonomy. 

Excellent resistance to abrasion 

• Size: 7-11 


3121X 

Showa 377 Nitrile Foam Coated Glove 

377- Fully nitrile coated nylon liner helps prevent any 

liquid penetration. 

Exceptional anatomical shape facilitates movement. 

Unique foam coating for grip. 

Ideal for assembly work 

• Size: 6-10 

• Colour: Blue/Black 

4121X 


Code: 303082 

Pair 


Code: 303188 

Pair 


Code: 304597 

Pair 

Showa 380 Nitrile 


380- Revolutionary compressed and 

embossed Foam Grip. Works in both 

wet and dry environments. Extended 

absorption capacity. Seamless nylon liner. 

For assembly, automotive, inspections, 

light fabrication, maintenance, material 

handling, mechanical, packaging, 

tool handling 

• Size: 6-9 


3121X 


Code: 303214 

Pair 

KeepSAFE Nitrile Fully Coated 

Knitwrist Glove 

Cotton jersey liner, knitwrist. Ideal for 

construction, street cleaning/refuse 

collection and fishing industry 

• Size: 7-10 


4111X 

Code: 303033 

Pair 

KeepSAFE Lightweight Nitrile 

Fully Coated Glove 

Lightweight nitrile. Interlock cotton liner, 

knitwrist. Ideal for manufacturing and 

cleaning industries 

• Size: 8-10 


3111X 

Code: 303039 

Pair 

KeepSAFE Lightweight Nitrile 

Coated Glove 

Open back lightweight nitrile. Interlock 

cotton liner and knitwrist. Ideal for 

industrial tasks, general handling 

• Size: 8-10 


3111X 

Code: 303038 

Pair 

42

Grip It Oil Gloves 


Polyco Grip It Oil Glove Cut 1 

Liner is made from a combination of HPPE (high 

performance polyethylene) and glass fibre offering 

good resistance to mechanical hazards. Two layers 

of nitrile coating to provide ultimate protection and 

gripping ability. The first layer which is a full coating, 

is soft and resilient allowing for excellent dexterity. 

The second layer which is a palm coating, is 

infused with microfoam bubbles increasing 

resistance to oils and maximising grip, especially in 

wet and oily conditions 

• Size: 7-11 


4122X 

Code: 303244 Manufacturer’s code: GIO Pair 

Polyco Grip It Oil Gauntlet Cut 1 

Two layers of nitrile coating to provide ultimate 

grip,abrasion protection and durability. The 

palm coating is infused with microfoam bubbles 

increasing resistance to oils and maximising grip 

in wet and oily handling environments. Good 

protection against a wide range of chemicals, 

including strong detergents, oils and certain 

solvents. Tested in accordance with European 

standard EN1186 making it suitable for food 

contact 

• Size: 8-11 


X2XXXX 

4121X 

TYPE A 

Code: 303245 Manufacturer’s code: GIOG1 Pair 

Polyco Grip It Oil Therm Cut 1 

Liner is made from a combination of HPPE (high 

performance polyethylene) and glass fibre offering good 

resistance to mechanical hazards. Two layers of nitrile 

coating to provide ultimate protection and gripping 

ability. The first layer which is a full coating, is soft and 

resilient allowing for excellent dexterity. The second 

layer which is a palm coating, is infused 

with microfoam bubbles increasing resistance 

to oils and maximising grip, especially in wet 

03X 

and oily conditions 

• Size: 7-11 

• Colour: Yellow/Black 

4122X 

Code: 303246 Manufacturer’s code: GIOTH Pair 

Polyco Grip It Oil Glove 

Cut 3 

Liner is made from a combination of 

HPPE (high performance polyethylene) 

and glass fibre offering good resistance 

to mechanical hazards. Two layers 

of nitrile coating to provide ultimate 

protection and gripping ability. The 

first layer which is a full coating, is 

soft and resilient allowing for excellent 

dexterity. The second layer which is a 

palm coating, is infused with microfoam 

bubbles increasing resistance to oils and 

maximising grip, especially in wet and 

oily conditions 

• Size: 7-11 


4X43B 

Polyco Grip It Oil Therm 

Glove Cut 5 

Made from a combination of HPPE (high 

performance polyethylene) and glass 

fibre. Two layers of nitrile coating to 

provide ultimate gripping ability and the 

highest level of abrasion resistance. The 

first layer is a full coating and is liquid 

resistant. The second layer coats the 

palm of the glove and incorporates 

microfoam bubbles, which increase 

resistance to oil and maximise grip 

in wet and greasy conditions. 

Fleecy Liner: Provides exceptional 

warmth and comfort 

• Size: 7-11 


X2XXXX 

01X 

4X44D 

Polyco Grip It Oil Gauntlet 

Cut 5 

Granulated foam slip-resistant PVC 

coating is especially competent in 

oily conditions. Kevlar ® knitted liner 

provides maximum cut protection. 

Offers good resistance to a variety 

of chemicals including acids, 

alkalis, oils and greases. 

Waterproof dual PVC coating is 

highly flexible, which is maintained 

even in cold temperatures. 

Conforms to European standard 

EN407 for Thermal Hazards 

• Size: 8-11 

• Colour: Green/Black 

X1XXXX 

4X42E 

TYPE B 

Polyco Grip It Oil Glove 

Cut 5 

Made from a combination of HPPE 

(high performance polyethylene) and 

glass fibre, the liner attains maximum 

EN388 scores in all categories. Two 

layers of nitrile coating to provide 

ultimate protection and gripping ability. 

The first layer, which is a full coating, is 

soft and resilient allowing for excellent 

dexterity. The second layer, which is a 

palm coating, is infused with microfoam 

bubbles increasing resistance to oils and 

maximising grip, especially in wet 

and oily conditions 

• Size: 7-11 

• Colour: Yellow/Black 

4X44D 

Manufacturer’s code: GIOK3 

Code: 303243 

Pair 

Manufacturer’s code: GIOTHK5 

Code: 303241 

Pair 

Manufacturer’s code: GIOG5 

Code: 303240 

Pair 

Manufacturer’s code: GIOK 

Code: 303242 

Pair 

43


Latex Coated Gloves 


Skytec Ninja Flex 

The seamless lightweight (15gg) liner and latex 

coating maintain an overall super thin feel for 

enhanced dexterity, fit and comfort. For manual 

handling in damp and dry conditions. Anatomically 

designed for high levels of comfort and tactile 

touch. Elasticated wrist provides a secure fit. 

Silicone and lint free 

• Size: 7-10 

• Colour: Red 

3131X 

Manufacturer’s code: SKY191/2/3/4 

Code: 304771 

Pair 

GREAT VALUE 

KeepSAFE Latex Palm 

Coated Glove 

Knit wrist. Great dry and 

wet grip. Strong durable 

and hard wearing 

• Size: 8-10 


Code: 430072 

Pair 

2131X 

Code: 303040 Case of 120 

Juba ® Grip Latex Coated Glove 

Seamless design ensures good ergonomic. Great dry and wet grip. 

Strong, durable and hard wearing. Cotton/polyester knitted liner 

• Size: 8-10 


Colour: Yellow/Orange Manufacturer’s code: 251 

Code: 304152 

Colour: Yellow/Green Manufacturer’s code: 251 

Code: 304709 

2141X 

Pair 

Pair 

KeepSAFE Latex Coated Grip Glove Cotton liner 

Excellent value where secure grip is required. Crinkle latex coating in green or orange. 

Seamless liner provides comfort and dexterity 

• Size: 8-11 




Colour: Green 

Code: 303026 

2143X 

Pair 

SHOWA 310 Grip Glove Green 

Flexible and robust offering excellent dexterity with good 

resistance to tearing. 

For heavy duty manual handling. Rough latex surface 

provides a tactile feel and excellent grip. Breathable 

back of hand to reduce perspiration. Seamless liner 

prevents irritation 

• Size: 7-10 


2142X 

SHOWA 330 ReGrip 

Reinforced grip glove. Double latex coating in the area 

of the glove subject to most stress; between thumb 

and index finger. Rough latex surface provides a tactile 

feel and excellent grip. Maximum resistance to rips. 

Seamless liner prevents irritation 

• Size: 7-10 

• Colour: Grey/Black Palm 

2142X 

KeepSAFE Fully Coated Latex 

Knitwrist Glove 

Ideal for a wide range of industrial tasks from assembly 

and engineering to refuse collection. Suitable for wet 

and dry conditions. Knitted base 

• Size: Men’s 



2111X 



Code: 304077 

Pair 

44

General Handling Gloves 


KeepSAFE Pick And Go Glove 

CONFORMS TO EN 388 INTERMEDIATE DESIGN 

PVC dots on palm, fingers. Polyester. Ideal for sorting and parts handling 


• Colour: White with blue dots 


Code: 430864 

2031X 

Pair 

Bleached Stockinette Glove 

Bleached cotton, fourchette pattern. Reversible 


Size: Men’s Code: 304155 Pair 

Size: Ladies’ Code: 304156 Pair 

Blended Yarn Knitted Glove 

Seamless cotton/nylon polyester mix. 

Elasticated wrist. 

Ambidextrous. Machine washable 



Cotton Stockinette Glove 

Standard quality knit wrist 



Code: 015036 

Pair 

Code: 304111 

Pair 

Criss Cross Glove 

Cotton Back-Leather 

Palm Glove 

Chrome leather palm. Cotton back. 

Knitted wrist 




High grip PVC lattice finish. 

High levels of dexterity and grip. 

Knitted base 

• Size: 10 

• Colour: Mustard 


113XX 

Code: 304010 

Pair 

Code: 304076 

Pair 

45


General Handling Gloves 

uvex phynomic wet 

The phynomic wet coating allows liquids to run off while 

light oil is absorbed for high levels of grip in moderate 

wet and light oil applications. Exceptional abrasion 

resistance for high levels of protection and durability for 

more demanding environments. Soft breathable liner with 

second skin fit. Flexible construction gives high levels of 

dexterity and reduces fatigue. Dermatologically tested and 

approved - ideal for allergy sensitive wearers. Certified to 

Oeko-Tex Standard 100 - no harmful substances used in 

the manufacturing of this glove 

• Size: 7-10 


4131X 


KeepSAFE Hi-Vis Latex Coated Glove 


Seamless high visibility cotton/acrylic base for 

warmth. Latex coating gives maximum grip in 

wet and dry conditions. Excellent for low light 

work environment 

• Size: 8-10 

• Colour: Saturn Yellow/Black 


2132X 


Ansell Hyflex ® 11-800 Nitrile Foam 

Coated Glove 

Micro-porous nitrile coating on a seamless liner for 

delicate, precise handling – packaging, automotive, 

electronics. 


• Size: 6-10 

• Colour: White/Grey 


Code: 304585 

3131A 

Pair 

General Use PVC Gloves & Gauntlets 

ALL CONFORM TO EN 388 

GREAT VALUE 

KeepSAFE 

PVC Gauntlet 

• Size: 9-10 


• Length: 270mm 


3121X 

Code: 303022 

Pair 

• Size: 9-10 



Code: 303023 

Pair 

KeepSAFE PVC Lightweight Glove 

Flexible, good sensitivity, and comfortable in use. Good dry grip. 

Fully coated knitwrist. Smooth finish. For general handling 

• Size: 8-10 



3121X 

• Size: 10 



Code: 303024 

• Size: 10 



Pair 

Code: 304930 

Pair 

Code: 303025 

Pair 

46

Rigger Gloves 


KeepSAFE Canadian Rigger Style Yellow 

Hide Palm Glove 

Full grain cowhide. Safety cuff with vein protection 

patch. Palm lined. Elasticated back 

• Size: 10 


Code: 304014 

3122X 

Pair 

KeepSAFE Gold Canadian Rigger Style 

Chrome Leather Glove 

High quality, shoulder chrome leather. Elasticated back. 

Palm lined 

• Size: 10 


Code: 304072 

4244X 

Pair 

KeepSAFE Cowhide Three Piece 

Rigger Glove 

High quality cowhide palm. Rubberised cuff, vein patch 

protection. Palm lined. Cotton back 

• Size: 10 

• Colour: Black/Yellow 


Code: 013428 

4143X 

Pair 

GREAT VALUE 

KeepSAFE Chrome Leather Red 

Cotton Back Rigger Glove 

Premier quality chrome split leather. Knuckle and 

fingertip protection. Rubberised safety cuff. Palm lined. 

Cotton back 

• Size: 10 



4123X 

Canadian Rigger Style Split 

Leather Glove 

Chrome leather. Safety cuff, vein protection 

patch. Elasticated back. Palm lined 



Code: 304012 

Pair 

Leather Lined Driving Glove 

Yellow cowhide. Elasticated back. 

Fully fleece lined. Superior quality 


Code: 304033 (Lined) 

4111X 

Pair 

Code: 304057 

Pair 

Code: 304032 (Unlined) 

Pair 

47


Specialist Handling Gloves 

uvex ThornArmor ® 3092 Glove 

Originally developed for handling plants with hazardous thorns and needles. 

Three layers of SuperFabric ® * brand material providing ANSI/ISEA Level A9 

cut and ANSI/ISEA Level 5 needlestick protection a highly 

puncture-resistant palm creating a barrier against sharps including 

hypodermic needles. Superior grip and abrasion resistant palm. 

• Size: 5-11 

4X33F 


uvex HexArmor Needlestick 4041 NSR Glove 

Highest level of cut resistance on noted enhanced areas, ANSI/ISEA Cut Level A9 

and Needlestick Level 5. Needlestick resistant gloves with Neoprene 

cuff with velcro closure. Suitable for dry and light oil use. Full coverage 

design with 3 layers of SuperFabric provides industry leading ultra-high 

cut and needlestick resistance. Silicone patterned palm for excellent grip. 

Back of hand knuckle padding 

• Size: 6-12 

4X42F 


uvex HexArmorThin Lizzie 2090X Glove 

The highly flexible IR-X ® Exoskeleton keeps hands protected from impact and pinch 

injuries. The sandy nitrile palm coating delivers superior grip and abrasion 

resistance in wet or dry environments. Reinforced thumb crotch patch 

• Size: 5-12 

4X44EP 

Code: 432052 Manufacturer’s code: 2090X Pair 

uvex HexArmor Rig Lizard 2030 Glove 

SuperFabric ® * brand material palm provides ANSI/ISEA cut level A6 resistance high 

cut protection. Highly flexible IR-X ® Exoskeleton keeps hands protected 

from impact and pinch injuries. Additional guard between thumb and 

index finger. Palm tested to EN407 and achieved level 2 rating 

• Size: 7-12 

4X32FP 


uvex HexArmor Rig Lizard 2025 Glove 

SuperFabric ® * brand material palm provides ANSI/ISEA cut level A6 

resistance - the highest cut protection available in the industry. 

Back of hand IR-X ® Impact Exoskeleton with high flex design. 

Superior wet/dry grip and abrasion resistance. 

Conforms to EN407 contact heat for level 2 performance 

• Size: 6-12 

4X44FP 


48


Mechanics & Anti-Vibration/Impact 


Polyco Multi-Task 3 Three 

Open Fingers Glove 

Blend of synthetic leathers with PVC reinforced 

fingertips and inner palm, and three open fingers. 

Reinforced areas on palm and finger tips ensure added 

protection in key areas. Adjustable Velcro ® wrist strap 

for a secure fit 

• Size: 7-11 

• Colour: Grey/Black 

2141X 

Code: 304785 Manufacturer’s code: MT3 Pair 

Polyco Multi-Task 5 

Fully Fingered Glove 

Blend of synthetic leathers with PVC reinforced fingertips 

and inner palm. Reinforced areas on palm and finger 

tips ensure added protection in key areas. Adjustable 

Velcro ® wrist strap for a secure fit 

• Size: 7-11 


2141X 

Code: 304789 Manufacturer’s code: MT5 Pair 

Polyco Tremor-Low 

Vibration Reducing Glove 

Seamless knitted shell with vibration reducing coating. 

Unique coating on the glove acts to reduce the effects 

of impact, shocks and vibration against mechanical 

vibration and shock EN 10819. TRM=0.77



Anti-Vibration/Impact 

Impacto Anti-Vibration 

Mechanics Air Glove 

Made of cowhide leather for maximum durability and 

protection. Silicone dots on the palm and fingertips 

ensure outstanding grip and flexibility. Protects from 

vibration when using hand-held or hand guided power 

tools and machines such as sanders, grinders, disc 

cutters, hammer drills, brush cutters and mowers. 

Meets ISO 10819 standard 

• Size: M-XL 


1221 

Code: 431933 Manufacturer’s code: BG408 Pair 

Impacto Anti-Impact HAMMER GLOVE 

Thin crinkled coating improves sensitivity and dexterity. 

Durable resistant coating offers better Protection from 

abrasion. Seamless Polycotton knit is breathable and 

comfortable offering excellent fit. Cost effective solution 

to impact injuries on the thumb/web area 

when hammering nails or similar applications. 

Padded Right hand 

• Size: 7-9 


3131 

Padded Right hand 

Code: 431931 

Padded Left hand 

Code: 431932 

Manufacturer’s code: DP470042 

Pair 

Manufacturer’s code: DP470041 

Pair 

Impacto Nitrile Anti-Vibration Air Glove 

Patented Air Bubble technology in palm, fingers, thumb; 

extremely resistant individual air chambers for effective 

protection that won't degenerate. Excellent dexterity, 

ultimate dry gripping. Cut, puncture resistant, maximum 

abrasion protection. Optimal snag, fray resistance. 

Lightweight, flexible nitrile coated fabric. 

Meets ISO 10819 standard 

• Size: L-XL 

(other sizes available as special orders) 


4212 

Code: 431934 Manufacturer’s code: BGNitrile Pair 

50 

Impacto 502-20 Fingerless 

Anti-Impact Glove 

VEP palm padding between thumb and index finger. 

Nylon lycra, leather palm. Typically for impact protection 

when using had tools 

• Size: M-L (other sizes available as special orders) 



Impacto 501-00 Fingerless 

Anti- Impact Glove 

VEP palm padding between thumb and index finger. 

Four way stretch polycotton Lycra liner. Typical usegeneral 

assembly, material handling 

• Size: M-L (other sizes available as special orders) 


2243 3231 


Impacto AVPRO Anti-Vibration 

Mechanic's style Glove 

Full finger style provides maximum hand 

protection. Padded with patented foam 

technology in the palm, fingers, thumb and 

thumb/web area to help prevent Hand-Arm 

Vibration syndrome (HAVS) and White Finger 

Disease. Meets ISO 10819 standard. Non-slip 

textured palm with elasticised back. Elastic wrist 

with adjustable hook and loop closure 


• Colour: Black/Yellow palm 

Manufacturer’s code: AVPRO 

Code: 432489 

2210 

Pair

STANLEY Gloves 

ALL STANLEY GLOVES CONFORM TO EN420 AND EN388 


Stanley Razor Tread 

Gripper Gloves 

Breathable knit back for comfortable 

fit. Razor tread gripper pattern provides 

extra grip. Seamless fit for flexibility 


• Size: 9-11 

4122X 

Stanley Foam 

Gripper Gloves 

Bright yellow knit for added visibility. 

Sandy foam dip provides extra grip. 

Breathable knit back for comfort 

• Size: 10 

2131X 

Stanley Extreme 

Performance Glove 

Synthetic leather palm. Rubberised 

reinforced palm overlays. Rubberised 

reinforced thump saddle. Wrist pull tab. 

Spandex breathable back. Hook and loop 

closure. Injection moulded rubberised 

back protection 


• Size: 10 

3121X 

Stanley Fingerless 


Synthetic leather palm. Double palm 

overlays. Half finger design. Rubberised 

thumb saddle. Perfect for plumbing and 

electricians. High dexterity design. Foam 

padded knuckle guard. Spandex back – 

breathable. Hook and loop closure 


• Size: 10 

3121X 

Manufacturer’s code: SY510 

Code: 432762 

Pair 


Code: 432763 

Pair 


Code: 432764 

Pair 


Code: 432765 

Pair 

Stanley Framer 


¾ short finger design provides extreme 

dexterity. Synthetic leather palm. 

Rubberised palm overlays. Rubberised 

thumb saddle. Foam padded knuckle 

guard. Breathable spandex back. Hook 

and loop closure 


• Size: 10 

3121X 

Stanley Performance Glove 

Synthetic leather palm. Rubberised palm 

overlays. Rubberised thumb saddle. 

Padded knuckle guard. Hook and loop 

closure. Breathable spandex back 


• Size: 10 

3121X 

Stanley Premium 


Foam padded knuckle guard. Breathable 

spandex back. Reinforced fingers for 

better grip. Synthetic leather palm. 

Rubberised palm overlays. 

Rubberised thump saddle 


• Size: 10 

3121X 

Stanley Vibration Reduction 


Goat leather palm. Gel padded palm 

overlays. Water and oil resistant palm 

for enhanced grip and durability. Foam 

padded knuckle. Hook and loop closure 

Breathable spandex back 


• Size: 10 

3132X 


Code: 432766 

Pair 


Code: 432767 

Pair 


Code: 432768 

Pair 


Code: 432769 

Pair 

Stanley Leather Hybrid 


Rugged reverse cowhide finger and palm 

overlays provided extra durability and 

grip. Lightweight and breathable spandex 

back allows for a cool and comfortable 

fit. Terry Cloth brow wipe 

• Colour: Black/Tan Palm 

• Size: 10 

2122X 


Code: 432770 

Pair 

Stanley Winter Rigger Glove 

40g Thinsulate liner keeps hands 

warm. ToughTread Double Stitching 

& Reinforced Finger Tips for greater 

durability. Leather knuckle strap 

and Reinforced safety cuff. 

Thick leather palm 

• Colour: Black/Tan Palm 

• Size: 10 


Code: 432771 

X1X 

4133X 

Pair 

Stanley Hipora Membrane Waterproof Performance Glove 

Thinsulate Hipora Thermal Liner provides waterproof insulation from the cold. Durable 

outer shell provides abrasion protection. Synthetic leather palm. Rubberised palm 

overlays. Rubberised palm fingertips. Neoprene knuckle guard 

• Colour: Black/grey Palm 

• Size: 10 


Code: 432772 

4111X 

Pair 

51


DeWALT Gloves 

ALL DEWALT GLOVES CONFORM TO EN420 AND EN388 

DeWalt Glove-in-Glove 

Gripper Glove 

7g acrylic Thermal Liner. ¾ height dip 

for added protection from abrasion and 

moisture. Micro foam dip provides grip 

and flexibility. 15g outer shell 


• Size: 10 (Large) 

Manufacturer’s code: DPG737 

Code: 432751 

3221X 

Pair 

DeWalt Cut-Level 3 

TouchScreen HPPE Glove 

Cut-Level 3. TouchScreen capable. Black 

foam. Nitrile palm. Seamless fit 



4332X 


Code: 432750 

Pair 

DeWalt Leather Performance 

Hybrid Glove 

Split cowhide leather palm. Double 

palm contact point overlays. Breathable 

spandex back. Slip in cuff. Reinforced 

thumb saddle 

• Colour: Black/Tan palm 



Code: 432752 

3121X 

Pair 

DeWalt Light Utility 


Synthetic leather palm. Breathable back 

Rubberised finger tip in thumb and index 

finger. Palm double overlays. Light utility 

glove. Slip in cuff 

• Colour: Black/Grey palm 


3121X 


Code: 432753 

Pair 

DeWalt Latex Gripper 

Textured Rubber Grip. Textured Rubber 

palm. Breathable knit back. Seamless fit. 

Ergonomic design 

• Colour: Yellow/Black palm 


2142X 


Code: 432754 

Pair 

DeWalt Fingerless 


Half finger performance glove design. 

High dexterity fingerless design. Double 

palm overlays. Terry Cloth brow wipe. 

Neoprene knuckle 




Code: 432755 

4131X 

Pair 

DeWalt Framer 


3-finger Performance glove design. 

¾ short finger design. Double palm 

overlays. Terry Cloth Brow Wipe. 





Code: 432756 

4131X 

Pair 

DeWalt Performance Glove 

SecureFit Performance Glove Design. 

Double palm overlay. SecureFit wrist 

closure. Terry Cloth brow wipe. 





Code: 432757 

4131X 

Pair 

DeWalt Premium 


Heavy utility performance glove. Memory 

gel padded palm. Water/Oil resistant PVC 

palm overlays. Synthetic leather palm. 

Synthetic leather fourchettes. Ultralock 

wrist. ToughThread double stitching 



3221X 

DeWalt Premium Fingerless 


Technician fingerless design. Oriented 

toward electricians and plumbers. High 

dexterity fingerless design. Double palm 

overlays. Terry Cloth brow wipe 

ToughThread Double Stitching 



2131X 

DeWalt Premium Framer 


Durable and robust 3-finger design. 

Durable rubberized palm overlays. 

Durable rubberized finger overlays. 

¾ short finger design. Wrist pull and 

finger tab. Terry Cloth brow wipe. 




3121X 

DeWalt Premium Powertool 


Synthetic leather palm. Gel padded 

Powertool grip. Rubberised palm 

overlays. Rubberised finger overlays. 

Reinforced Toughgrip palm. Reinforced 

thumb saddle. Leather knuckle guard. 




3541B 


Code: 432758 

Pair 


Code: 432759 

Pair 


Code: 432760 

Pair 


Code: 432761 

Pair 

52

Cut Resistant Colour Coded Gloves 

Colour coding of gloves is a useful way to instantly monitor if the correct protection level is being worn. 

LOW CUT LEVEL – RED 

General handling with low cut resistance 

• Exceptional quality and value, lightweight lower 

cut protection handling glove 

• Offers excellent dexterity levels, comfort and fit 

• Available in a variety of coatings 

• Gloves should be used in work areas of 

minimal cut hazards 

Applications: 

General assembly 

Component handling 

Light engineering work 

Mechanical work 

Inspection 

MEDIUM CUT LEVEL – ORANGE 

General handling with medium cut resistance 

• A range of cost effective, durable gloves suitable for 

processes where there is a cutting or laceration risk to 

workers’ hands 

• Excellent comfort and close fitting gloves offering high 

protection levels 

• Available in a variety of coatings 

• Gloves should be used in work areas where a medium 

cut hazard is present 

Applications: 

Component handling 

Tiling 

Steel handling 

Construction 

Automotive manufacturing 

HIGH CUT LEVEL – GREEN 

General handling with high cut resistance 

• Green high cut resistance 

• Designed to be close fitting for maximum dexterity. 

Flexible and comfortable gloves with the highest level 

of anti-cut protection for higher cut risk industries 

• Available in a variety of coatings. 

• Gloves should be used in work areas where a high 

risk level of cut risk is present 

Applications: 

Construction 

Glass handling 

Engineering work 

Metal fabrication 

Sheet steel manufacturing 


ALL CONFORM TO EN388 INTERMEDIATE DESIGN 

We help you to improve hand safety, reduce injuries and maintain compliance with safety regulations across your businesses. 

KeepSAFE Pro Nitrile Foam Coated 

Cut Level 1 Glove 

Ideal for wet, dry and oily conditions. Lightweight 

seamless knitted red nylon liner. High abrasion 

resistance. Nitrile coating is robust and yet tactile. 

Knitted wrist for secure fit 

• Size: 8-11 



4132X 

KeepSAFE Pro PU Coated 


Ideal for intricate handling. Lightweight application in 

dry environments. Offers outstanding comfort, fit and 

sensitivity. High abrasion resistance. Seamless knitted 

red nylon liner 

• Size: 6-11 



4131X 

KeepSAFE Pro PU Coated 3 Digit 


Ideal for dexterous and intricate applications.. 

Lightweight three digit design. Thumb and two fingers 

removed to aid small part handling. High abrasion 

resistance. Seamless knitted red nylon liner 

• Size: 7-11 



4131X 

Code: 303178 

Pair 

Code: 303201 

Pair 

Code: 303190 

Pair 

KeepSAFE Pro Nitrile Foam 

Coated Cut Level B Glove 

Ideal for work in damp or greasy 

environments. Nitrile foam coating 

ensures excellent grip and performance. 

Dexterous and flexible for secure 

handling. Open back ensure breathability 

for added comfort. Seamless knitted 

orange liner 

• Size: 8-11 



4X43B 


Cut Level B Glove 

Ideal for heavier duty handling in light 

engineering and assembly applications. 

Polyurethane coating to palm and 

fingers offers good grip. High abrasion 

resistance. Seamless knitted orange liner. 

Elasticated knit wrist for a snug fit 

• Size: 6-11 



4X43B 

KeepSAFE Pro Nitrile Foam 

Coated Cut Level C Glove 

Ideal for handling sharp oily components. 

Excellent surface grip in all environments. 

Protects against cuts and abrasions. 

Foam nitrile coating absorbs oil and 

ensures secure grip. Seamless knitted 

green liner for added comfort and 

dexterity 

• Size: 6-11 



4X43C 


Cut Level C Glove 

Ideal for applications where fine handling 

and robust performance are a requisite. 

Lightweight polyurethane coating 

enhances grip and abrasion protection. 

Knitted wrist for secure fit. Open back 

design for extra comfort and breathability 

• Size: 6-11 



4X43C 

Code: 304123 

Pair 

Code: 303192 

Pair 

Code: 303307 

Pair 

Code: 303309 

Pair 

53


Cut Resistant Gloves 


Ansell Hyflex ® 11-518 PU-Coated 

Cut Level B Glove 

An 18-gauge glove with Dyneema ® Diamond Technology 

fibre and a thin PU coating bring a new degree of 

dexterity and tactility for applications with cut risks. 

Ultralight fabric. Seamless liner breathes to keep hands 

cool and dry 

• Size: 6-11 


3X31B 


Polyco Polyflex ® Hydrophobic 


Water repellent hydrophobic treatment for great wet 

performance with maximum breathability. Foamed nitrile 

for enhanced grip in dry, damp and oily conditions. 

Touch sensitive fingertips enabling use of touch screen 

devices without removing the glove. Highly resistant 

to tear and abrasion. Breathable and lightweight liner 

ensures user comfort 

• Packs of 10 

• Size: 6-11 

• Colour: Green and Black 

4X43C 

Code: 303272 

Pair 

Polyco Dyflex ® Plus N Nitrile Foam 

Coating Cut Level C Glove 

Lightweight high cut-resistant glove with foamed nitrile 

coating and thumb crotch reinforcement. Flat nitrile 

reinforcement between thumb and forefinger offers 

additional protection in an area that is susceptible to 

wear and tear. Foamed nitrile palm coating channels 

oils and liquids away from the surface of the glove to 

optimise grip. Seamless breathable liner and highly 

flexible coating ensures high levels of comfort in 

prolonged use. 

Close fitting to provide greater dexterity. Knitted wrist 

ensures a secure fit and keeps hands free from dust 

and debris 


• Size: 6-11 

• Colour: Grey Liner 

with Blue Foamed Nitrile Palm Coating 4X42C 

Code: 304832 

Pair 

54 

KeepSAFE Impact Resistant 


Comfortable 13 gauge HPPE liner. Sandy 

nitrile dipped palm. Thermo Plastic 

Rubber (TPR ) shields the back of the 

fingers and hand. Great dexterity and 

high abrasion resistance. Adjustable 

Velcro ® wrist strap for secure fit. 

Combination of materials offers excellent 

in use comfort 


• Size: 8-10 

• Colour: Yellow and Black 

Code: 430970 

4X43CP 

Pair 

KeepSAFE Cut Resistant 

Level C PU Coated Glove 

Seamless glass fibre/spandex/synthetic 

mix yarn with PU coating on palm and 

fingers. Soft finish, exceptional cool 

comfort. Ideal for glass handling, 

construction, automotive fabrication 

and sheet metal work 

• Size: 8-10 



Code: 304271 

Pair 


Level C Nitrile Coated Glove 

Seamless glass fibre/spandex/synthetic 

mix yarn with nitrile coating on palm and 

fingers. Increased resistance to oils and 

greases. Soft finish, exceptional cool 

comfort. Ideal for glass handling, sheet 

metal work, engineering maintenance, 

refuse collection, janitorial applications, 

agriculture and horticulture 

• Size: 8-10 



Code: 304272 

Pair 


Level C PU Coated Glove 

Cut resistant knitted liner with 

polyurethane coating on palm and 

fingers. Suitable for dry working 

conditions 

• Size: 8-10 



4X44C 4X44C 4X44C 

Code: 304024 

Pair

Cut Resistant Gloves & Sleeves 


JUBA ® Ninja X4 Bi-Polymer 

Coated Cut Level C Glove 

Made with a fibreglass liner on the inside and 

Nylon ® liner on the outside for medium risk of 

cutting. Treated with Actifresh ® , which prevents 

odours and eliminates the bacteria caused by 

perspiration. Sanitized ® treatment 

avoids skin irritation 


• Size: 7-11 

Manufacturer’s code: NX400 

Code: 303099 

4X42C 

Pair 

JUBA ® Ninja Silver Plus 

PU Coated Cut Level C Glove 

Machine knitted liners made with High Performance 

Polyethylene and glass yarn to provide a good cut 

resistance barrier, while offering dexterity and comfort. 

Breathable to reduce perspiration and skin irritation. 

Treated with Actifresh which prevents odours and 

eliminates the bacteria caused by perspiration 


• Size: 7-10 

Manufacturer’s code: NSP00 

Code: 303090 

4X42C 

Pair 

JUBA ® Ninja Lite - Ultra Lightweight 

PU Palm Coated Glove 

Nylon/PU, 18 gauge liner allowing glove to be ultraslim. 

Offers outstanding comfort, fit and sensitivity 

for most delicate applications. 

Breathable and lint free 


• Size: 7-11 

2121X 

Manufacturer’s code: NL00 

Code: 303104 

Pair 

JUBA ® Ninja Flex Latex Coated Glove 

15 gauge Nylon ® shell with rough latex coating on palm and fingers. Provides excellent grip 

in both wet and dry conditions due to the thin, flexible crinkle latex palm. 

Super lightweight and breathable 


• Size: 7-11 

Manufacturer’s code: NF00 

Code: 303106 

2131X 

Pair 

HyFlex 11-251 Cut Resistant Sleeve with thumb slot 

INTERCEPT Cut Resistance Technology provides best-in-class cut 

protection and a soft and cool feel to the worker. Seamless design and the 

options of lengths and widths ensure an excellent fit. With thumb slot 

Narrow fit, length 18" Manufacturer’s code: 11-251-820753 

Code: 430750 

2X42B 

Each 

HyFlex 11-250 Cut Resistant Sleeve without thumb slot 

INTERCEPT Cut Resistance Technology provides best-in-class cut 

protection and a soft and cool feel to the worker. Seamless design and the 

options of lengths and widths ensure an excellent fit. Without thumb slot 

Narrow fit, length 30cm Manufacturer’s code: 11-250-820756 

Code: 430757 

2X42B 

Each 

Wide fit, length 18" Manufacturer’s code: 11-251-820754 

Code: 430751 

Each 

Wide fit, length 40cm Manufacturer’s code: 11-250- 820777 

Code: 430758 

Each 

55


Food Processing Disposable Gloves 

KeepCLEAN Latex 

Powder-Free Disposable Gloves 

Approved for use in food preparation. 100% natural latex. 



• Colour: Natural 


Code: 304671 Box of 100 

KeepCLEAN Latex 

Powdered Disposable Gloves 

Approved for use in food preparation. 100% natural latex. 



Size: S-XL 

Colour: Natural 

Code: 015031 Box of 100 

Size: M-L 

Colour: Blue 

Code: 015030 Box of 100 

Vinyl Disposable Gloves 

KeepCLEAN Vinyl Powder-Free Disposable Gloves 

Smooth exterior, beaded cuff. Powder free. 

Approved for food use. Dispenser box 



Colour: Clear 

Code: 304661 Box of 100 

Colour: Blue 

Code: 304663 Box of 100 

KeepCLEAN Vinyl Powdered Disposable Gloves 

Smooth exterior, beaded cuff. Lightly powdered. Approved for food use. Dispenser box 



Colour: Clear 

Code: 304997 Box of 100 

Colour: Blue 

Code: 304994 Box of 100 

Colour: Red 

Code: 304576 Box of 100 

Colour: Green 

Code: 304577 Box of 100 

Food & General Handling Gloves 

KeepCLEAN Latex Rubber 

Household Gloves 

Slip resistant pattern grip on palm. Soft flock lining 

absorbs perspiration and keeps hands dry. 

Beaded cuffs for easy donning. Length 300mm. 

Thickness on palm 0.40mm 



Juba ® Grippaz Ambidextrous 

Extra Strong Nitrile Glove 

Patented double sided grip on palm and 

back and also inside for extra traction. 

100% nitrile. No latex, no protein allergy issues. 

Chemical resistant. 

• Size: 7-11 


TYPE B 

Ansell AlphaTec ® 

87-029 Astroflex 

Good grip in both wet and 

dry environments due to 

the crinkle finish. Polyamide 

seamless liner - Wrinkle 

natural rubber latex 

coating on the hand, 

smooth coating on the cuff 

• Size: 7-11 



X2XXXX 

TYPE A 

2141X 

Colour: Blue 

Code: 300796 


Code: 300797 

Colour: Green 

Code: 300798 

Colour: Pink 

Code: 300799 

Pair 

Pair 

Pair 

Pair 

Code: 304679 

Pack of 12 pairs 

Code: 304224 

Pair 

56

Let’s Let’s to the to Chase 

the Cha 

Let’s to the Chase 

CUT 5 

CUT CUT 5 5 

Samurai Cut Samurai range Cut of Hand 

5 range of Hand 

Samurai Cut 5 range of Hand 

Protection, uniquely Protection, for uniquely the Rail 

for the Rail 

Protection, uniquely for the Rail 

Industry, with Industry, the following with the features: 

Industry, with the following features: 

following features: 

DRY USE 

APPLICATION DRY 

DRY 

DRY USE 

USE 

USE 

APPLICATION 

APPLICATION 

DEXTEROUSCUT 5 TOUCHSCREEN DEXTEROUS 

DEXTEROUS 

DEXTEROUS 

TOUCHSCREEN 

WET USE DRY USE OILY USE WET USE 

APPLICATION 

WET WET USE APPLICATION 

USE APPLICATION 

WET USE 

OILY OILY 

OILY 

USE APPLICATION 

USE 

USE 

APPLICATION 

APPLICATION 

APPLICATION 

APPLICATION 

THERMAL 

THERMAL 

THERMAL 

IMPACT THERMAL 

PROTECTION IMPACT 

IMPACT 

PROTECTION 

PROTECTION 

3 DIGIT IMPACT 

3 DIGIT 3 DIGIT PROTECTION 

3 DIGIT 

GL194 

Samurai GL194 

GL194Protector 

Cut Samurai 5 EN388 Protector 

4543 

Size: Cut Samurai Cut 58-10 

EN388 5 EN388 Protector 4543 4543 

Cut 5 EN388 4543 

Size: Size: 8-10 8-10 

Size: 8-10 

GL194 GL197 

Samurai Protector Samurai GL197 

GL197 

Lite Cut 5 

Cut 5 EN388 4543 EN388 Samurai 4543 Lite Lite Cut Cut 5 5 

Size: EN388 Samurai EN388 7-10 4543 4543 Lite Cut 5 

Size: 8-10 

EN388 4543 

Size: Size: 7-10 7-10 

Size: 7-10 

GL197 GL196 

Samurai Lite Cut 3 GL196 Digit 5 

GL196 

Samurai 

EN388 4543 Lite 3 Digit 3 Cut Digit Samurai 5 

EN388 Lite 3 Lite Cut Digit Cut 4543 5 Samurai 

Size: 7-10 

5 

Lite Cut 5 

Size: EN388 EN388 7-10 4543 4543 

EN388 4543 

Size: Size: 7-10 7-10 

Size: 7-10 

GL196 GL203 

3 Digit Samurai Samurai GL203 

GL203 

Thermo 

Lite Cut 5 Wet Samurai Cut Thermo 5 EN388 

4543 Wet Wet Samurai Cut Cut 5 EN388 5 Thermo 

EN388 4543 

EN388 

Size: 4543 4543 Wet Cut 5 EN388 

Size: 7-10 

9-11 

4543 

Size: Size: 9-11 9-11 

Size: 9-11 

GL122 

Samurai GL122 

Wet Cut 5 

EN388 Samurai GL122 

4543 Wet Wet Cut Cut 5 5 

Size: EN388 Samurai EN388 8-11 4543 Wet 4543Cut 5 

Size: EN388 Size: 8-11 8-11 4543 

Size: 8-11 

GL122 GL204 

Samurai Wet Cut Samurai GL204 5 

Superlite 

EN388 4543 Cut Samurai GL204 

5 Superlite 

Size: 8-11 EN388 Cut Samurai Cut 5 54543 

Superlite 

Size: EN388 Cut EN388 5 

7-11 4543 4543 

Size: EN388 Size: 7-11 7-11 4543 

Size: 7-11 

GL204 GL198 

Samurai Superlite Samurai GL198 

Thermo 

Cut 5 Cut Samurai GL198 

5 Thermo 

EN388 4543 EN388 Cut Samurai Cut 5 54543 Thermo Size: 

8-11 EN388 Cut EN388 5 

Size: 7-11 4543 4543 Size: Size: 

8-11 EN388 8-11 4543 Size: 

8-11 

GL198 GL200 

Samurai Thermo Samurai GL200 

Premium 

Cut 5 Cut Samurai GL200 5 EN388 Premium 

4543 

EN388 4543 Size: 

Cut Cut Samurai 57-11 

EN388 5 EN388 Premium 4543 4543 

8-11 Size: Size: Cut 7-11 57-11 

EN388 4543 

Size: 7-11 

GL105 

Samurai GL105 

Nitrile 

Cut Samurai GL105 

5 EN388 Nitrile Nitrile 4543 

Size: Cut 

Samurai 

Cut 57-11 

EN388 5 EN388 

Nitrile 

4543 4543 

Size: Cut Size: 57-11 

EN388 4543 

Size: 7-11 

GL105 GL199 

Samurai Nitrile Samurai GL199 

PU Cut 5 

Cut 5 EN388 4543 EN388 Samurai GL199 4541 PU PU Cut Cut 5 5 

Size: 7-11 Size: EN388 EN388 

Samurai 7-11 4541 4541 

PU Cut 5 

Size: Size: EN388 7-11 7-11 4541 

Size: 7-11 

Contact us for details Contact us for details 

Contact us us for for details 

Contact us for details 

Contact us for more details


Tychem ® Trusted Chemical Protection System TM 

Finding the right glove and coverall 

combination to match your protection 

need has never been easier 

Tychem ® chemical protective clothing from DuPont is 

recognized for its reliability against hazardous organic 

and inorganic chemical exposure. To ensure the highest 

protection right to the tip of your fingers, DuPont is 

extending its chemical protective solutions through its 

new Tychem ® glove range, offering perfect compatibility 

with its coveralls. 

safespec.dupont.co.uk 

Visit SafeSPEC TM to determine your most suitable 

protective garment and glove combination among 

more than 1000 scenarios ! 

UNCOMPLICATED, UNCOMPROMISING PROTECTION 

DuPont Personal Protection 

DuPont de Nemours (Luxembourg) S.à r.l. 

Contern - L-2984 Luxembourg 

Customer Service 

T. +352 3666 5111 

mycustomerservice.emea@dupont.com 

tychemgloves.dupont.com 


DuPont, the DuPont Oval Logo, Tyvek®, Tychem®, Tychem® Trusted Chemical Protection System and SafeSPEC are trademarks or registered trademarks of DuPont or its affiliates. Copyright © 2019 DuPont de Nemours Inc. L-6100-EN 

58

DuPont Tychem ® Glove Range 

UNCOMPLICATED, UNCOMPROMISING PROTECTION 


Tychem® NT420* 

Chemical splash and oil protection. 

Designed for jobs requiring barrier 

protection, while keeping tactile 

discrimination. 


Resistant to a range of solvents, oils, 

hydrocarbons, animal fats, greases 

and other chemicals. Bisque finish 

allows secure handling in wet and dry 

conditions. Unlined, with an ergonomic 

design to maximize comfort. 

• CAT III, EN ISO 374-1, TYPE B, EN ISO 374-5 



• Length: 9.5 in (240 mm) 

• Blue - From 6-7/S to 9-10/XL 

• CAT III, EN ISO 374-1, TYPE A, EN ISO 374-5, EN 388: 2016 2001X 




• Green - From 6/XS to 11/XXL 

Code: 303071 Code: 303075 


Bisque finish allows secure handling 

in wet and dry conditions. 

Resistant to a range of solvents, 

animal fats and other chemicals. 

Flock-lined with an ergonomic 

design for enhanced comfort. 

Tychem® NP530* 

Double-dipped neoprene over natural 

rubber for dexterity. Resistant to a wide 

range of chemicals. 


• 100% nitrile - Cotton flock 



• Green - From 6/XS to 11/XXL 

• CAT III, EN ISO 374-1, TYPE A, EN ISO 374-5, EN 388: 2016 2021X 

• Neoprene over natural rubber - cotton flock 



• Black/blue - From 7/S to 10/XL 

Code: 303077 Code: 303085 

Tychem® NP560 

Resistant to a wide range of chemicals, 

including acids, caustics, solvents, 

greases and oils. Suitable for heavy 

duty work or applications involving 

exposure to the presence of solvents. 

Tychem® NP570 CT 

Protection where tasks present the 

dual risk of chemical exposure and 

cut. Provides ANSI level A5 and EN 

level 5 cut protection and defense 

against acids, caustics, solvents, 

greases and oils. 


• Fully coated flexible neoprene - 

15-gauge seamless, polyester knit liner 




• Black - From 8/S to 11/XL 

• CAT III, EN ISO 374-1, TYPE A, EN ISO 374-5, 

EN 388: 2016 3X43E, ANSI CUT A5 

• Neoprene - 13-gauge engineered yarn 




• Black - From 8/S to 11/XL 

Code: 303087 Code: 303069 

* Compliant with FDA food handling requirements 21 CFR 177.2600. Refer to tychemgloves.dupont.com for food contact certificates and restrictions 

tychemgloves.dupont.com 


DuPont, the DuPont Oval Logo, and all trademarks and service marks denoted with , sm or ® are owned by affiliates of DuPont de Nemours, Inc. unless otherwise noted. © 2019 DuPont 

59


ARIA 

Featuring antimicrobial Sanitized ® 

treatment for total peace of mind! 

The integrated hygiene function is long-lasting and reliable, keeping 

bacteria and other microbes from settling on the gloves. Also protects 

against stain formation and unpleasant odours. 

Code: 431171 

Long lasting freshness 

Abrasion resistance 

Thermal protection 

Nitrile foam coating 

Breathable superior comfort 

Anatomically engineered 

for maximum fit 

Excellent grip in both wet 

and dry environments 

EN 388:2016 

EN407:2004 

4131X 

X1XXXX 

Tested for harmful substances. 

Part of 

60 

Full sanitised range available online

Skytec Gloves 


Skytec Argon Xtra 

Cut Level 4. Fully dipped, durable PVC sponge touch 

finish. Soft fleece lining for comfort in cold conditions. 

Undulating contour grip pattern to the palm. Hydropellent 

Technology repels liquids. Silicone free. Coral coating 

approved for food handling 

• Size: 8-10 


Code: 431174 Pair 

Skytec Beta 1 Nitrile Foam Glove 

One of the lightest gloves in the industry - maximum 

comfort. NFT nitrile foam coating enhances protection 

as well as providing good wet grip by channeling 

away excess fluid from the glove surface. Tested for 

harmful substances according to Oeko-Tex ® Standard 

100. Excellent resistance to abrasion. Flexible and 

comfortable. Excellent dexterity. Sanitized ® antimicrobial 

finish provides extra freshness. Machine knitted 

liner made from Nylon/Spandex which gives good fit 

and sensitivity, superior comfort and dexterity. 18gg 

extremely lightweight seamless liner with a solid knit 

wrist.NFT nitrile foam coating for better grip in wet, oily 

or dry conditions 

• Size: 7-10 



Skytec Idaho Breathable 

Protective Glove 


Seamless nylon liner with a ó HPT foam coating Knitted 

Wrist with PVC-HPT coating on lining palm, front 

and back of fingers/thumb including the knuckles. 

Tough flexible PVC Sponge Touch finish coating using 

hydropellent technology provides the highest level of 

grip and soaks up the oil to ensure the hand won't slip 

in oil conditions. Treated with Actifresh to kill bacteria 

and promote freshness 

• Size: 7-11 


3131X 4121X 3131X 


Skytec Flecta-5 High- 

Visibility Nitrile Foam Cut 

Level E Glove 

High-visibility foam nitrile grip glove 

for manual handling in poorly lit 

environments, where risk of cuts is high. 

Visible even in poor and fading light. 

Micro nitrile foam coating. HPPE, steel 

and polyester liner. Excellent grip and 

good mechanical resistance 

• Size: 7-10 

• Colour: Yellow Liner 

with High-Visibility Orange Palm 


Skytec Ninja Knight 

Bi-Polymer Coated Cut Level 

5 Glove 

CONFORMS TO EN 388, TEST RESULT: 4544 

Excellent wet and dry grip. High 

durability and grip, with tear and 

abrasion resistance. Anatomically 

designed for comfort, dexterity and fit, 

the glove retains flexibility despite its 

high protection level. Machine knitted 

liner made with High Performance 

Polyethylene and Glass yarn to provide a 

good cut resistance barrier, while offering 

dexterity and comfort. Coated with 

Bi-polymer on palm up to fingers. Treated 

with Actifresh to kill bacteria and promote 

freshness. Elasticated wrist provides a 

secure and comfortable fit 

• Size: 7-10 



SKYTEC Theta 5 

Excellent grip in wet, oily or dry 

conditions. Anatomically designed for 

comfort, dexterity and fit, glove retains 

flexibility despite the high protection 

levels. Treated with Actifresh to kill 

bacteria and promote freshness. 

Seamless HPPE and glass cut resistant 

liner with an advanced sponge nitrile 

(patent pending) palm coating. Breathable 

back of hand to reduce perspiration and 

skin irritation. Elasticated wrist provides 

a secure fit 

• Size: 7-10 

• Colour: Green High Visibility 


Skytec Ninja X4 

Cut Level B 

CONFORMS TO EN388 4432 

Secure Grip. 

A supple and light glove, with cut level 

4 resistance. Anatomically designed to 

follow the natural curve of the hand and 

help reduce hand fatigue. Excellent grip 

in both wet and dry environments. High 

abrasion and tear resistance. Silicone 

free. Elasticated wrist 

• Size: 7-10 


4X43E 4X43C 4X42B 4X31B 


61


Disposable Gloves – Nitrile Disposable Gloves 

Suitable for people with latex allergies and provides resistance to oils and diluted chemicals. 

Ansell TouchNTuff ® 92-670 Nitrile 

Powder Free Disposable Gloves 

Innovative Nitrile compound – outstanding chemical 

and mechanical properties, comfort and 

dexterity. 3 times the puncture resistance of 

latex or PVC disposable. 100% nitrile; no 

waxes, silicone or plasticizers. Powder-free. 

Textured finish on fingertips. Improved grip 

TYPE B 

Length: 240mm 

Size: 6½-7, 7½-8, 8½-9, 9½-10 

Colour: Light Blue 


Code: 304670 Box of 100 


Powder Free Disposable Gloves 

Innovative Nitrile compound – outstanding chemical 

and mechanical properties, comfort and dexterity. Three 

times puncture resistance of latex or PVC disposable. 

No risk to type I allergies. AQL 1.5. 

Contains no natural rubber. Anti-staticity tested 

(EN 1149-1 & 1149-3) and meets the 

requirements defined in EN 1149-5 

• Thickness: 0.12mm 

• Size: 6½-7, 7½-8, 8½-9, 9½-10 

TYPE B 



Length: 300mm 


Code: 304573 Box of 100 

Length: 240mm 

Manufacturer code: 92-600 

Code: 304575 Box of 100 


Powdered Disposable Gloves 

100% nitrile – absolutely no fillers, silicones, or 

plasticisers. AQL 1.5 


• Thickness: 0.12mm 

• Size: 6½-7, 7½-8, 8½-9, 9½-10 



TYPE B 


Code: 304664 Box of 100 

• #1 For Grip Performance* 

• Chemical Resistant 

• Inside Grip • Reduced Slip 

Grippaz Engineer's Mate 

Disposable Nitrile Glove 

Uses a specially formulated nitrile 

compound that gives unrivalled grip 

when handling grease, oils, detergents, 

solvents and water. 

• Ambidextrous 



Code: 430061 

Colour: Black 

Code: 430060 

TYPE B 

Box of 50 gloves 

Box of 50 gloves 

62 

• Tough & Long Lasting 

• #1 For Grip Performance* 

THE WORLD’S LEADING WORKSHOP • Chemical Resistant GLOVE 

*Grip tests conducted by the UK’s leading testing house SATRA 

• Inside Grip • Reduced Slip 

• Tough & Long Lasting

Chemical Resistant Gloves 

ALL CONFORM TO EN 388 AND EN 374 COMPLEX DESIGN 


Ansell AlphaTec ® 87-118 

Heavy Duty Rubber 

Chemical Resistant Gauntlet 

Tough, heavyweight comfortable 

glove. Excellent resistance to 

many chemicals. Beaded, 

rolled cuffs, flocked lining 

• Size: 6½, 7½, 8½, 9½ 


Code: 304242 


3121A 

TYPE A 

Pair 

Ansell VersaTouch ® Orange Glove 

Category III 

Rough finish for excellent grip. Tough, 

natural rubber; flock-lined. Good 

resistance to many chemicals. 

Length: 325mm 

• Size: 6½, 7½, 8½, 9½ 


Code: 304259 


2010X 

TYPE B 

Pair 

Ansell Premium Sol-vex ® 37-900 

Gauntlet 

Premium quality nitrile gauntlet for high 

risk chemical handling. Superior chemical 

resistance and reliability. 100% pressure 

tested for confidence in high 

risk areas. Chlorinated to improve 

wet grip. Sanitised-bacteriacide treatment. 

AQL 0.65. 

Length: 380mm 

• Size: 7-11 



Code: 304615 


4101X 

TYPE A 

Pair 

Ansell AlphaTec ® 58-530W Nitrile Coated Gauntlet 

A unique combination of grip and chemical resistance and the first 

glove to utilise the revolutionary. Ansell Grip Technology . 

Ergonomic hand shape reduces hand fatigue. 

AQL: 0.65. Length: 305mm 

• Size: 8-10 



TYPE A 

X1XXXX 

Manufacturer’s code: 58-530W 


3122A 

Ansell Classic Sol-vex ® 37-675 Gauntlet 

Designed to deliver optimal performance in wet and dry 

environments where chemical resistance is crucial. Flock 

lined nitrile gauntlet. Embossed sand patch finish to enhance 

grip. Sanitised - bactericide treatment. Antistatic to EN1149. 

Length: 330mm. Thickness: 0.38mm 

• Size: 7-11 


TYPE A 



4101X 

63



Nitrile and rubber protective gloves offering certified quality at very competitive prices. 

Polyco Jet Black Glove Category III 

A heavyweight glove that will stand up to repeated 

knocks,rubbing and scuffing. Good slip resistant 

pattern on the palm enhances grip. Soft cotton 

flock lining absorbs perspiration, keeping hands 

cool. Thickness: 0.80mm. Length: 310mm 

• Size: 6-6½, 8-8½, 9-9½, 10 


4141X 

Manufacturer’s code: 524/5/6/7 


KeepSAFE Satin Nitrile Unlined Glove 

Category III Complex Design 

Chemically toughened, high performance nitrile 

(100% NBR), specially formulated for dexterity 

and superior grip. High resistance to animal fats, 

oils, most solvents. Unflocked interior – minimises 

airborne cross infection. Food safe, latex protein 

free. For wide ranging industrial applications 




Code: 303051 

1000 

Pair 

KeepSAFE Heavyweight 

Rubber Glove Category 

III Complex Design 

Heavyweight rubber – good resistance to 

knocks and abrasion. Patterned grip, flock lining. 

For variety of uses 



2121X 

TYPE A 


KeepSAFE Long Chemical 

Resistance Gauntlet 

Resistant to animal fats, solvents, alkalis. 

Patterned grip, good dexterity. Good abrasion 

resistance. Flock lining 





Code: 304213 

4101X 

TYPE A 

Pair 

KeepSafe Rubber Chemical 

Resistant Gauntlet 

Excellent general purpose glove. 

Patterned grip, flock lined. 

For industrial cleaning, many other applications 

• Size: S-L 


2000X 

TYPE B 


Showa 660 Triple Dipped PVC 

Heavyweight Chemical Resistant 

Gauntlet 

Patented dipping process and special hydrocarbon 

treatment improves performance and longevity. 

Waterproof, supple, comfortable cotton liner. 

Rough finish on hand – secure grip. PVC dipped, 

for greatest resistance to oils, chemicals 

(hydrochloric acid, caustic soda, kerosene). 

Maximum resistance to abrasion (level 4) 


• Size: 9-11 



Code: 431546 

4121X 

TYPE B 

Pair 

64


ALL CONFORM TO EN 388 AND EN ISO 10819 INTERMEDIATE DESIGN 




Industrial Natural Rubber Glove. 

High resistance to water based chemicals. 

Unlined 100% rubber latex. 

Beaded cuff for tear resistance. Smooth finish 

• Size: 7½, 8½, 9½, 10½ 



Length: 432mm Thickness: 1.2mm 


Code: 304226 



Code: 304232 

3121B 

TYPE A 

Pair 

Pair 

Polyco Long John 

PVC Coated Gauntlet 

Ideal for deep water – keeps wearer clean in 

muddy, dirty environments. Integral sleeve. 

Adjustable Velcro ® strap. PVC coat, cotton liner. 

For drainage works, fisheries, fish farming, 

chemical handling. Length: 640mm 

• Size: Men’s (9½) 

• Colour: Red with dark green sleeve 



Code: 303049 

4121X 

TYPE A 

Pair 



Industrial Natural Rubber Glove. 

High resistance to water based chemicals. 

Unlined 100% rubber latex . 

Beaded cuff for tear resistance. Smooth finish 

• Size: 7½, 8½, 9½, 10½ 





Code: 304227 



Code: 304233 

3121B 

TYPE A 

Pair 

Pair 

Electrical Insulating 

Latex Material: 

Excellent electrical resistance 

Anatomical Shape: 

For greater user comfort 

Class 00: Max working AC voltage 500V 

Class 0: Max working AC voltage 1,000V 




Class 4: Max working AC voltage 36,000 

Polyco Latex Insulating Electrician’s 

Gloves Class 0 

Class 0: Maximum working AC voltage 1,000V. 

Latex insulating gloves. 

Excellent electrical resistance. 

Anatomical shape: for greater user comfort 

• Length: 36cm 

• Size: 8-11 

• Colour: Natural Latex 

Code: 304439 

EN 60903 

Pair 

Polyco Latex Insulating Electrician’s 

Gloves Class 00 

Class 00: Maximum working AC voltage 500V. 

Latex insulating gloves. Excellent electrical resistance. 

Anatomical shape: for greater 

user comfort 

• Length: 36cm 

• Size: 8-11 

• Colour: Natural Latex 

Code: 304438 

EN 60903 

Pair 

Polyco Electrician’s Leather 

Protector Gauntlet 

Leather gauntlet over-glove with securing buckle. 

Designed to be worn over Electricians Gloves . Provides 

additional mechanical protection. Offers a higher level of 

grip. Protects in dirty or oily environments. Extends the 

life span of Electrician’s Gloves 

• Size: 9-13 


3111X 

Code: 304437 

Pair 

65


Heat Resistant Gloves 

ALL CONFORM TO EN 388 AND EN 407 INTERMEDIATE DESIGN 

GREAT VALUE 

KeepSAFE Comfort Leather 

Welder’s Gauntlet 

Excellent value leather welding 

gauntlet. Cow split leather. 

Fully lined with 100% cotton. 

Fully welted 




413X4X 

4244X 

Size: 10 


Size: 11 


KeepSAFE Pro Reinforced 

Ambidextrous Welding 

Gauntlet 

Quality cow split leather welder’s 

gauntlet. Kevlar ® stitching. Cotton fleece 

on palm. Cotton drill on cuff. 

Cow split leather reinforced strap on 

crotch of reversible thumb. 

Sock lining 


413X4X 

• Size: 11 



4244X 

Code: 015021 

Pair 

KeepSAFE Goat Skin 

Tig Welder’s Gauntlet 

Soft leather ensures maximum sensitivity 

to delicate welding operations yet quality 

also ensures maximum protection from 

heat. Goat skin leather palm and fingers 

for a soft comfortable feel. Nappa leather 

provides robust protection. Chrome 

split leather on 6" cuff. Light and 

flexible. Mordant treatment 

to fix colour 

41XX3X 

• Size: 9 



3143X 

Code: 303002 

Pair 

Economy Red Leather 

Welder’s Gauntlet 

Excellent value leather welding gauntlet. 

Cow split leather. Fully lined with 

100% cotton. Fully welted 

413X4X 




4244X 

Size: 10 


KeepSAFE Light Kevlar ® 

Cut Resistant Level 2 Glove 

For fine handling of sharp objects. 

Use as an under glove to 

provide cut resistance. 

100% Kevlar ® gauge 13 

• Size: 9-10 



Code: 303125 

X1XXXX 

114XX 

Pair 

KeepSAFE Kevlar ® 

Cut Resistant Level 3 Sleeve 

2-ply Kevlar ® sleeve with thumb 

hole. Non-slip top (not constricting) 

fits all sizes 



Size: 355mm (14”) 

Code: 303134 

Size: 558mm (22") 

Code: 303136 

X1XXXX 

133XX 

Each 

Each 

Ansell ActivArmr ® 43-113 Kevlar ® Glove 

Category III Complex Design 

Constructed from 100% Kevlar ® para-aramid fibre 

with cotton liner. Ambidextrous. 

Heat resistance up to 350°C/660°F. 

Machine washable at 40°C 


• Size: 10-11 




Code: 304760 

43421X 

154XE 

Pair 

66

Cold Handling Gloves 


Juba ® 252 Cold Weather Glove 

Insulated liner. Blend of polyester and cotton. 

Rough latex coating on palm. Terry towelling 

interior protects from cold. Latex dip protects 

from mechanical hazards. Optimum grip on 

wet and dry surfaces. Not suitable for oily 

conditions. Glove may lose its insulative 

properties when wet 

• Size: 8-10) 



01X 

2141B 

KeepSAFE Thermal 

Latex Coated Glove 

Seamless knitted cotton/acrylic liner for warmth. 

Excellent value for thermal glove. Secure grip in cold 

and dry conditions 

• Size: 8-10 

• Colour: Violet/Grey 


2142X 


Ansell ACTIVARMR 97-011 

Sandy finish ¾ double-dipped nitrile coating. 

2-ply acrylic brushed liner. Tested to perform at 

-4°C/-20°F. Black and orange contrast provides 

good visibility in low-light conditions. 

Excellent for wet/oily and dry 

material handling. More 

breathable than leather, 

010 

keeping hands dry and comfortable. 

• Size: 8-11 

• Colour: Black/Orange 

4132A 



KeepSAFE Insulating 

Grip Glove 

Close fitting thermo glove with single sided dot coating. 

Thermolite fibre provides comfort and warmth. 

Breathable liner prevents build up of moisture on the 

hand. Dotting ensures great grip. 13 gauge Thermolite 

thermal knit, single side dot coating. 

Good grip, abrasion resistance 




1131X 

Endurance Thermal Insulating Glove 

Ideal warm liner glove for cold area product handling. 

One piece knitted Thermolite fibre glove. 

Soft and non-chafing. Warm and comfortable. 

Ideal as a liner under food grade latex/nitrile glove. 

13 gauge Thermolite thermal knit. Optimum warmth 




Skytec Argon Cold Weather Glove 

Double insulated nylon liner with HPT foam ¾ coating. 

Durable and flexible to -50°C. Provides thermal 

protection from cold and wintery conditions. ¾ dipped 

for added weather repellence, making it the ideal cold 

weather mechanical handling glove. HPT foam 

coating extends across the palm, knuckles and 

fingers. Soft lining. Secure grip. Encapsulated air 

molecules provide an inherent cushioning effect. 

Silicone-free 

• Size: 7-10 



X2X 

3231X 

Code: 303147 

Pair 



67

Safety Footwear 

Buying Guide 

Choose the right footwear 

Most workplaces have varying requirements for the provision of safety footwear, which 

is why we offer a comprehensive range within which you should be able to identify 

appropriate footwear to meet the needs of your workforce whatever the hazards identified 

in your risk assessment. 

Whilst protection is paramount it is recognised that with long wear periods, often in hostile 

conditions, wearer acceptance, design, brand and comfort are additional considerations. 

We therefore offer varying styles from executive shoes to heavy duty rigger boots, and 

leading brands such as Dr Martens, Rock Fall, Dewalt, Uvex & Dunlop alongside our 

increasingly popular and cost effective Tuf Revolution and Tuf ranges. 

Health & Safety 

Legislation 

EN ISO 20345:2011 is the current standard to which 

new and recently certified footwear has to conform 

(Whilst stock rotates some safety footwear may have 

been tested to the previous standard). The standard to 

which the footwear conforms will be identified on the 

product information label within the footwear. 

The standard requires the inclusion of a 200 joule toe 

cap for impact protection. In addition to the over arching 

requirements of the standards there are a number of 

progressive ratings which assist selection of footwear 

appropriate for varying workplace hazards, these are: 

Slip Resistance 

Slips, trips and falls are an ever present hazard within most workplaces and safety footwear 

can play it’s part in preventing injury, particular from slips, by featuring slip resistant soles. 

For many years the test of choice for slip resistance has been SATRA’s TM144 standard 

which evaluates the performance of the sole unit on a water wet quarry tile. Well 

established styles of footwear are likely to have been tested to TM144 and will be identified 

as such by the TM144 icon. 

However with regard to new styles or footwear undergoing periodic re-testing the recently 

established EN ISO 13287 with it’s progressive SRA, SRB and SRC ratings has become 

more widely used. 

Details of the EN ISO 13287 testing requirements are shown in the table below: 

Marking 

Maintenance 

Slip resistance ratings for industrial PPE footwear in Europe 

Footwear slip resistant on 

Marking symbols and specifications 

Minimum coefficient of friction by ISO 13287:2006 

Forward heel slip 

Forward flat slip 

SRA Ceramic tile with 0.5% SLS solution 0.28 0.32 

SRB Steel with 90% glycerine 0.13 0.18 

SRC Both the above Both the above on respective surfaces Both the above on respective surfaces 

NB: ISO 13287:2006 is identical to EN ISO 13287:2007 

Footwear tested to EN ISO 13287 and the rating achieved will be identified by the 

appropriate SRA/SRB/SRC icon. 

As with all footwear it is essential that, to achieve optimum performance of the properties 

built in to the safety footwear at time of manufacture, safety footwear is cleaned and 

maintained regularly. 

• SB – safety basic footwear meeting all the minimum 

requirements of the standard 

• S1 – additionally featuring anti-static 

properties and fully enclosed and energy absorbing 

heel unit 

• S2 – additionally featuring the use of water resistant 

leather 

• S3 – additionally featuring cleated outsole and pierce 

resistant midsole 

• S4 – rubber or polymeric waterproof footwear with 

200 joule toe cap, anti-static properties and energy 

absorbing heel unit 

• S5 – additionally featuring cleated outsole and pierce 

resistant midsole 

Additional protective features can be built into the 

footwear and are identified by the following suffixes: 

• P – protection from upward penetration provided by 

a composite or steel midsole (not used in conjunction 

with S3 or S5) 

• M – metatarsal impact protection 

• C – conductive properties helping to prevent the buildup 

of static (but no protection against electric shock) 

• A – anti-static properties to prevent the 

build-up of static and give limited protection against 

electric shock from nominal mains voltage 

• HI – insulation against heat 

• CI – insulation against cold 

• E – energy absorption in heel unit 

• WRU – water resistant uppers 

• HRO – resistance to hot contact up to 300°C 

Sizing 

Safety footwear often carries 

European sizing. Please see right 

for a comparison table. 

Shoe Size Conversion Table 

This table is for guidance only as sizes are not standardised 

British 2 3 4 5 6 7 8 9 10 11 12 13 

Continental 35 36 37 38 39 41 42 43 44 46 47 48 

Safety Icons Key 

METAL 

FREE 

Denotes Metal Free 

Denotes electrostatic discharge (ESD) 

LADIES SIZES 

Denotes footwear suitable for women 

TOECAP 

Denotes footwear with safety toe cap 

WATER 

PROOF 

Denotes waterproof footwear 

Denotes SRB rating 

MIDSOLE 

Denotes footwear with safety midsole 

TM144 

Denotes TM144 rating 

SRA 

Denotes SRA rating 

WATER 

RESISTANT 

Denotes water repellent footwear 

ANTISTATIC 

Denotes footwear with anti-static soles 

SRC 

Denotes SRC rating 

68



69


S3 Water Resistant Safety Boots 

NEW 

TOECAP 

ANTISTATIC 

SRC 

WATER 

RESISTANT 

ProMan PM4002 Jackson Safety Boot 

CONFORMS TO EN ISO 20345:2011 S3 SRC 

Protective toecap and midsole, Jackson is lightweight and developed with premium 

materials including an Activ-Step ® shock absorbing dual density PU outsole. Water 

repellent smooth black leather. Protective steel toecap and stainless steel antipenetration 

midsole. Moisture wicking breathable mesh fabric lining. Activ-Step ® 

shock absorbing PU outsole. Anti-fatigue EVA footbed 



Code: 102040 

NEW 

NEW 

METAL 

FREE 

TOECAP 

WATER 

RESISTANT ANTISTATIC LADIES SIZES 

MIDSOLE SRC 

METAL 

FREE 

TOECAP 

WATER 


MIDSOLE SRC 

ProMan PM4020 Hartford Safety Boot 


100% non-metallic, with protective toecap and midsole, Hartford is lightweight 

and developed with premium materials including a shock absorbing dual density 

PU outsole. Water repellent smooth black nubuck. Protective fibreglass toecap and 

composite anti-penetration flexi-midsole. Moisture wicking breathable mesh fabric 

lining. Shock absorbing dual density PU outsole. Anti-fatigue EVA footbed 



Code: 100088 

ProMan PM4040 Bridgeport Safety Trainer 


100% non-metallic, with protective toecap and midsole, Bridgeport is lightweight 

and developed with premium materials including a shock absorbing dual density 

PU outsole. Water repellent smooth black nubuck. Protective fibreglass toecap and 

composite anti-penetration flexi-midsole. Moisture wicking breathable mesh fabric 

lining. Shock absorbing dual density PU outsole. Anti-fatigue EVA footbed 



Code: 100089 

70


NEW 

NEW 

WATER 

TOECAP 


MIDSOLE SRC 

TOECAP 

WATER 


MIDSOLE SRC 


Rock Fall ® RF170 Granite Robust Safety Boot 

CONFORMS TO EN ISO 20345:2011 S3 HI CI HRO SRC 

Protective toecap and midsole, Granite is highly robust and developed with 

specialist durability materials including FORCE10 ® components, IMPACT SHIELD 

and limited stitching. Water repellent full grain black leather. Protective steel 

toecap and composite anti-penetration flexi-midsole. Moisture wicking breathable 

mesh fabric lining. FORCE10 ® scuff cap and solid nitrile rubber outsole - tested to 

extraordinary abrasion, heat and cold performance levels. Anti-fatigue EVA footbed 

with IMPACT SHIELD shock reducing internal digging plate 

• Size: 5-15 (Includes sizes 6.5 and 10.5) 


Code: 102002 

Rock Fall ® RF15 Shale 

High Leg Safety Boot with Side Zip 


Protective toecap and midsole, Shale is highly robust and developed with specialist 

durability materials including FORCE10 ® components, IMPACT SHIELD and TPU 

ankle guard. It features a no. 8 YKK side zip for convenience. Water repellent full 

grain black leather with no. 8 YKK side zip. Protective steel toecap and composite 

anti-penetration flexi-midsole. Moisture wicking breathable mesh fabric lining. 

FORCE10 ® scuff cap and solid nitrile rubber outsole - tested to extraordinary 

abrasion, heat and cold performance levels. Anti-fatigue EVA footbed with IMPACT 

SHIELD shock reducing internal digging plate 



Code: 100201 

NEW 

NEW 

TOECAP MIDSOLE SRC 

WATER 

RESISTANT 

METAL 

FREE 

TOECAP 

WATER 


MIDSOLE SRC 

Rock Fall ® RF10 Ebonite 

Robust Safety Boot 


Protective toecap and midsole, Ebonite is highly robust and developed with 

specialist durability materials including FORCE10 ® components, IMPACT SHIELD 

and TPU ankle guard. Water repellent full grain black leather. Protective steel 


mesh fabric lining. FORCE10 ® scuff cap and solid nitrile rubber outsole - tested to 

extraordinary abrasion, heat and cold performance levels. Anti-fatigue EVA footbed 

with IMPACT SHIELD shock reducing internal digging plate 



Code: 100082 

Rock Fall ® TC340 Dakota 

Lightweight Safety Boot 


100% non-metallic, with protective toecap and midsole, Dakota is comfortable 

and lightweight, it's developed with specialist comfort materials including a shock 

absorbing dual density PU nitrile rubber outsole and Activ-Step ® PU anti-fatigue 

comfort footbed. Water repellent full grain black leather. Protective fibreglass 


mesh fabric lining. Shock absorbing dual density PU nitrile rubber outsole. 

Activ-Step ® PU anti-fatigue comfort footbed 



Code: 100102 

71



Ideal for construction and industries where safety and pierce resistant midsoles are important, 

these styles also have water resistant leather uppers. 

TOECAP 

ANTISTATIC 

MIDSOLE 

SRC 

WATER 

RESISTANT 

TOECAP 

ANTISTATIC 

MIDSOLE 

SRC 

WATER 

RESISTANT 

TOECAP 

ANTISTATIC 

MIDSOLE 

SRC 

WATER 

RESISTANT 

Helly Hansen Ferrous 

Safety Boot 

CONFORMS TO EN ISO 201345 S3 SRA 

Water repellent leather boots feature a certified 

outsole for slip resistance. 

Light-weight and flexible composite nail 

penetration protection and a 

steel toe cap. EVA midsole and a rubber outsole 

• Size 40-48 (full sizes only) 

• Colour: Brown 


Helly Hansen Addvis 

Mid Safety Boot 

CONFORMS TO EN ISO 201345 S3 SRC 

Performance boots with a composite toe 

protection and non-metallic nail penetration 

sole. Sole construction with light weight 

EVA in the midsole and a slip resistant 

rubber outsole 


• Colour: Black/Yellow 


Helly Hansen Chelsea Evolution 

Mid Safety Boot 

CONFORMS TO EN ISO 20345 S3 SRC ESD 

Combines exceptional comfort with a fresh 

design. The EVA midsole guarantees cushioning 

while the Helly Tech ® membrane keeps you 

dry on rainy days. Lightweight construction. 

Aluminium toecap. Air mesh lining. 

Waterproof upper 




TOECAP 

ANTISTATIC 

MIDSOLE 

SRC 

WATER 

RESISTANT 

TOECAP 


WATER 

RESISTANT 

TOECAP 


WATER 

RESISTANT 

Tuf Leather Safety Boot 

CONFORMS TO EN ISO 20345:2011 S3 WRU SRC S3 

S3 Full grain leather hiker styled safety boot 

incorporating FORCE10 ® Advanced Durability 

Components. Premium Full Gain Leather Upper. Padded 

Collar for Enhanced Comfort and Support. Steel Toecap 

and Stainless Steel Midsole. FORCE10 GR100 Solid 

Nitrile Rubber Outsole. IMPACT SHIELD Internal Digging 

Plate. EVA Footbed providing Increased Anti-Fatigue 

Properties 


• Colour: Green/Red 

Tuf 7.25" Mid-Cut Ankle Safety Boot 

with Midsole 

CONFORMS TO EN 20345:2011 200 JOULES S3 HRO SRC 

Mid height style full grain crazy horse leather. Water 

resistant hard wearing and breathable leather upper. 

Padded collar and tongue for comfort. High abrasion 

resistant lining for durability. Hard wearing TPU scuff cap 

for abrasion resistance. PU/rubber outsole for comfort 

and durability. Heat resistant to 300°C. Pierce resistant 

stainless steel midsole 



Tuf Chukka Safety Boot with Midsole 


Low cut style full grain crazy horse leather. 

Water resistant hard wearing and breathable leather 

upper. Padded collar and tongue for comfort. Speed 

lacing system. High abrasion resistant lining for 

durability. Hard wearing TPU scuff cap for abrasion 

resistance. PU/rubber outsole for comfort and durability. 

Heat resistant to 300°C. Pierce resistant stainless steel 

midsole 



Code: 198768 Pair £78.00 

Code: 100206 Pair £66.62 

Code: 100205 Pair £56.44 

72


TOECAP MIDSOLE SRC LADIES SIZES 

WATER 

RESISTANT 

ANTISTATIC 

METAL 

FREE 

TOECAP MIDSOLE SRC LADIES SIZES 

WATER 

RESISTANT 

ANTISTATIC 

METAL 

FREE 


uvex 2 shoe 

CONFORMS TO EN 20345-2011 S3 SRC 

Durable water-resistant leather outdoor safety shoe with puncture-resistant 

midsole. Low weight and flexible with excellent grip. Scuff-cap protects the leather 

preventing abrasion damage particularly when kneeling. Dual layer, low weight 

PU sole with removable antistatic comfort insole delivers outstanding impact 

absorption. The sole is designed to support the natural rolling motion of the foot 

without restricting movement. The tread pattern disperses surface debris to reduce 

slip risk. Virtually seam-free design to eliminate pressure points. Fulfils ESD 

requirements: resistance to ground under 35 megaohm 



Code: 120003 Manufacturer’s code: 6502.2 

uvex 2 boot 

CONFORMS TO EN ISO 20345:2011 S3 SRC. ESD RATED 

Durable water-resistant leather outdoor safety boot with puncture-resistant 

midsole. Low weight and flexible with excellent grip. Scuff-cap protects the leather 

preventing abrasion damage particularly when kneeling. Dual layer, low weight 

PU sole with removable antistatic comfort insole delivers outstanding impact 

absorption. The sole is designed to support the natural rolling motion of the foot 

without restricting movement. The tread pattern disperses surface debris to reduce 

slip risk. Virtually seam-free design to eliminate pressure points. Fulfils ESD 

requirements: resistance to ground under 35 megaohm 




METAL 

FREE 

TOECAP 

MIDSOLE 

METAL 

FREE 

TOECAP 

MIDSOLE 

SRC 

LADIES SIZES 

SRC 

LADIES SIZES 

WATER 

RESISTANT 

ANTISTATIC 

WATER 

RESISTANT 

ANTISTATIC 

Add uvex tune up 

Arch support insoles for 

uvex 1 and uvex 2 

Antistatic insoles designed to 

increase the wearer comfort by 

providing optimum support for the 

arches of the feet, helping to 

reduce foot fatigue 

uvex 1 boot 

STANDARD: EN ISO 20345:2011 S3 SRC. ESD RATED 

An ultra light, metal free, multipurpose safety trainer style 

boot with penetration-resistant midsole. The sole has been 

specifically designed for light industrial applications such as 

trades or indoor use such as logistics and warehousing and 

provides excellent grip. The tread pattern with pivot point 

reduces pressure on joints when twisting and turning. The 

uvex x-tended heel support increases stability and side impact 

protection without limiting movement. It also offers greater 

twist protection for reduced risk of sprains. The dual layer, low 

weight PU sole, with removable antistatic comfortable insole, 

delivers outstanding impact absorption. Virtually seam free 

design to eliminate pressure points 


• Colour: Black/Red 

uvex 1 shoe 

STANDARD: EN ISO 20345:2011 S3 SRC. ESD RATED 

An ultra light, metal free, multipurpose safety trainer with 

penetration-resistant midsole. The sole has been specifically 

designed for light industrial applications such as trades or 

indoor use such as logistics and warehousing and provides 

excellent grip. The tread pattern with pivot point reduces 

pressure on joints when twisting and turning. The uvex 

x-tended heel support increases stability and side impact 

protection without limiting movement. It also offers greater 

twist protection for reduced risk of sprains. The dual layer, low 

weight PU sole, with removable antistatic comfortable insole, 

delivers outstanding impact absorption. Virtually seam free 

design to eliminate pressure points 





Contact us for more details 

73


S3 Waterproof Safety Boots 

METAL 

FREE 

TOECAP 

ANTISTATIC 

MIDSOLE 

SRC 

WATER 

PROOF 

TOECAP 

ANTISTATIC 

SRC 

WATER 

MIDSOLE 

PROOF 

Tuf XT event ® Waterproof Non-metallic Safety Boot 

with Midsole 

CONFORMS TO EN 20345:2011 200 JOULES S3 WR HRO SRC 

Buffalo grain leather with highly breathable fully waterproof liner for comfort. Padded 

collar and half bellows tongue for easy donning. Metal free lacing system. EVA/Rubber 

outsole with TPU counter support for durability. Outsole heat contact resistant to 

300°C. PEP non-metallic composite toecap and penetration resistant midsole 



Code: 100220 

Tuf XT event ® Waterproof 8.5" Hi-Leg Zip Safety Boot 

with Midsole 


Full grain crazy horse leather with highly breathable fully waterproof liner for comfort. 

Padded collar and tongue for comfort. YKK ® side zip for quick and easy access. 

Hard wearing TPU scuffcap for abrasion resistance. PU/Rubber outsole for comfort 

and durability. Outsole heat contact resistant to 300°C. Pierce resistant stainless 

steel midsole 



Code: 100325 

NEW 

METAL 

FREE 

LADIES SIZES 

TOECAP 

WATER 

PROOF 


TOECAP 

ANTISTATIC 

SRC 

WATER 

MIDSOLE PROOF 

TOECAP 

ANTISTATIC 

MIDSOLE 

SRA 

WATER 

PROOF 

74 

Tuf Pro Waterproof Safety 

Boot with Midsole 

CONFORMS TO EN 20345:2011 200 JOULES S3 SRC 

Quality water resistant leather upper and fully 

waterproof lining. Padded collar and tongue. 

Full length footbed. Pierce resistant stainless 

steel midsole 



Code: 102003 

Tuf XT event ® Waterproof Safety 


CONFORMS TO EN 20345:2011 200 JOULES 

S3 HRO SRA 

Quality water resistant leather upper, fully 

waterproof lining. Padded collar, full length 

footbed. Anti-static EVA rubber sole, heat resistant 

to 300ºC. Pierce resistant stainless steel midsole 



Code: 198252 

Rock Fall ® RF222 Jet Waterproof Safety 

Boot with Side Zip 

CONFORMS TO EN ISO 20345:2011 S3 HRO WR SRC 


Jet is comfortable and lightweight, it's developed 

with specialist comfort materials including FORCE10 ® 

components, an Activ-Tex ® waterproof membrane 

and an Activ-Step ® PU anti-fatigue comfort footbed. It 

features a no. 8 YKK side zip for convenience. Water 

repellent full grain black leather with No. 8 YKK side 

zip. Protective fibreglass toecap and composite antipenetration 

flexi-midsole. Activ-Tex ® waterproof and 

breathable bootie membrane - tested for 8 hours (5 

times longer than EN requirement). FORCE10 ® dual 

density PU nitrile rubber outsole - tested to extraordinary 

abrasion, heat and cold performance levels. Activ-Step ® 

PU anti-fatigue comfort footbed 



Code: 102100

S3 Waterproof Safety Boots 

NEW NEW NEW 

METAL 

FREE 

LADIES SIZES 

TOECAP 

WATER 

PROOF 


METAL 

FREE 

TOECAP 

WATER 

PROOF 


METAL 

FREE 

LADIES SIZES 

TOECAP 

WATER 

PROOF 

ANTISTATIC 

SRC 


ProMan PM4008 Baltimore 

Waterproof Safety Boot 

CONFORMS TO EN EN ISO 20345:2011 S3 WR SRC 

100% non-metallic, with protective toecap and 

midsole, Baltimore is lightweight and developed 

with premium materials including an Activ-Tex ® 

waterproof membrane and Activ-Step ® shock 

absorbing dual density PU outsole. Water repellent 

smooth black leather. Protective fibreglass toecap 

and composite anti-penetration flexi-midsole. 

Activ-Tex ® waterproof and breathable bootie 

membrane - tested for 8 hours (5 times longer than 

EN requirement). Activ-Step ® shock absorbing PU 

outsole. Anti-fatigue EVA footbed 



Code: 100163 

Rock Fall ® TC1070 Denver 


CONFORMS TO EN ISO 20345:2011 S3 HI HRO WR SRC 


Denver is highly robust and developed with specialist 

durability materials including FORCE10 ® components, 

an Activ-Tex ® waterproof membrane, IMPACT SHIELD 

and R-TEN thread. Water repellent full grain black 

leather stitched with R-TEN abrasion resistant 

thread. Protective fibreglass toecap and composite 

anti-penetration flexi-midsole. Activ-Tex ® waterproof 

and breathable bootie membrane - tested for 8 hours (5 

times longer than EN requirement). FORCE10 ® scuff cap 

and solid nitrile rubber outsole - tested to extraordinary 

abrasion, heat and cold performance levels 



Code: 102049 

Rock Fall ® TC4200 Peakmoor 


CONFORMS TO EEN ISO 20345:2011 S3 WR SRC 

T100% non-metallic, with protective toecap and 

midsole, Peakmoor is lightweight but robust and 

developed with specialist durability materials 

including FORCE10 ® components, an Activ-Tex ® 

waterproof membrane and Activ-Step ® shock 

absorbing PU outsole. Water repellent full grain black 

leather. Protective fibreglass toecap and composite 

anti-penetration flexi-midsole. Activ-Tex ® waterproof 

and breathable bootie membrane - tested for 8 hours 

(5 times longer than EN requirement). FORCE10 ® 

scuff cap and Activ-Step ® shock absorbing PU 




Code: 016184 

NEW NEW NEW 

METAL 

FREE 

LADIES SIZES 

TOECAP 

WATER 

PROOF 


METAL 

FREE 

LADIES SIZES 

TOECAP 

WATER 

PROOF 


METAL 

FREE 

TOECAP 

WATER 

PROOF 

ANTISTATIC 

MIDSOLE 

SRC 

Rock Fall ® RF460 Slate Wateproof 

Composite Safety Boot 


The Slate is one of the most feature filled boots 

available. 100% Non-Metallic and fully waterproof, 

developed for comfort and durability. It features our 

unique dual footbed system. Protective fibreglass 

toecap and composite anti-penetration flexi-midsole. 

Premium full grain waxy leather with Activ-Tex ® 

Waterproof Membrane. Highly durable FORCE10 ® 

scuff cap and shock absorbing dual density rubber 

outsole. Wide fitting provides enhanced comfort for 

wearers with medical conditions 



Code: 100090 

Rock Fall ® RF4500 Titanium Waterproof 

Safety Boot with Side Zip 

EN ISO 20345:2011 S3 HI CI WR HRO SRC 

The Titanium is one of the lightest and most robust 

high leg boots available. 100% Non-Metallic and fully 

waterproof, developed with specialist durability materials 

including FORCE10 ® Protective fibreglass toecap and 

composite anti-penetration flexi midsole components 

and R-TEN thread. Premium full grain waxy leather 

with Activ-Tex ® Waterproof Membrane. Enhanced 

comfort footbed, foam padded collar and bellow. Highly 

durable FORCE10 ® scuff cap and solid nitrile rubber 

outsole. No. 8' YKK ® side zip 



Code: 102048 

Rock Fall ® TC3000 Tomcat Rhyolite 

Metatarsal Non-Metallic Waterproof 

Safety Boot with Midsole 

CONFORMS TO EN 20345:2011 200 JOULES S3 

M HRO WR SRC 

A Super lightweight, luxury metatarsal protection 

safety boot. Deep padded collar - extra support, 

comfort. Unique patented ROC-MET internal 

metatarsal guard. Revolutionary metatarsal 

protection, highest comfort and flexibility. Ultimate 

traction rubber outsole 



Code: 102024 

75


S3 Safety Boots 

A range of safety boots with toe caps and penetration resistant midsole providing 

protection and comfort in harsh working environments. 

METAL 

FREE 

TOECAP 

WATER 

RESISTANT 

ANTISTATIC 

MIDSOLE 

SRC 

METAL 

FREE 

TOECAP 

WATER 

RESISTANT 

ANTISTATIC 

MIDSOLE 

SRC 

TOECAP 

WATER 

PROOF 

ANTISTATIC 

MIDSOLE 

SRC 

Pro-Man TC35 Orlando 


CONFORMS TO EN ISO 20345:2011 S3 SRA 

Water repellent honey Nubuck. Protective steel 

toecap and midsole. Orlando is lightweight and 

developed with premium materials including a 

shock absorbing nitrile rubber outsole and 

Activ-Step ® PU anti-fatigue comfort footbed 


• Colour: Honey 

Code: 879097 

Manufacturer’s code: TC35 

Magnum Precision Sitemaster 

Leather Composite 

S3 Safety Boot Black 

CONFORMS TO EN 20345: 2011 S3 WR SRC 

Water resistant. Leather composite toe. Composite 

plate. Full grain leather upper. Dual density PU 

outsole with ladder grips for grip and durability 



Magnum Precision Sitemaster 

Nubuck Composite 

S3 Safety Boot Honey 

CONFORMS TO EN 20345: 2011 S3 WR SRC 

Nubuck composite toe. Composite plate. 

Dual density PU outsole with ladder grips for 

grip and durability 



LADIES SIZES 

TOECAP 

WATER 

RESISTANT 

ANTISTATIC 

MIDSOLE 

SRC 

Code: 432071 

Code: 432072 

METAL 

FREE 

LADIES SIZES 

TOECAP 

WATER 

PROOF 

ANTISTATIC 

MIDSOLE 

SRC 

METAL 

FREE 

LADIES SIZES 

TOECAP 

WATER 

PROOF 

ANTISTATIC 

MIDSOLE 

SRC 

Pro-Man PM100 

Chukka Boot with Steel Midsole 


Dual density PU sole. Black leather chukka boot. Deep 

padded collar. Water resistant. Steel toe cap midsole 



Code: 430475 

LADIES SIZES 

TOECAP 

WATER 

RESISTANT 

ANTISTATIC 

MIDSOLE 

Magnum Broadside 8.0 Composite 

S3 Waterproof Insulated Safety Boot 

CONFORMS TO EN ISO 20345:2011 S3 CI HI HRO WR SRC 

Ideal protection in harsh outdoor conditions. 

Waterproof and breathable bootie membrane. 200g 

Thinsulate insulated lining. Michelin outsole for 

maximum grip 



Code: 432073 

Magnum Broadside 6.0 Composite 

S3 Waterproof Safety Boot 

CONFORMS TO EN ISO 20345:2011 S3 CI HI HRO WR SRC 

Ideal protection in harsh outdoor conditions. 

Waterproof and breathable bootie membrane. 

Michelin outsole for maximum grip 



Code: 432074 

Pro-Man PM600 

with Non-Metallic Composite Midsole 


Anti-fatigue footbed with moisture wicking tiberelle 

lining. Anti-static properties. Abrasion resistant internal 

heel counter. PU moulded scuff cap 



Code: 101123 

76

S3 Safety Boots and Shoes 

uvex 1 business 

Versatile safety footwear in a timeless design 

NEW 


The new uvex 1 business is the ideal range for those that require 

smart work shoes or boots equipped with certified protection 

features needed for an industrial workplace. 

Save time during your working day with the uvex 1 business, 

designed to take you seamlessly from your desk to the shop floor. 

Standard EN ISO 20345:2011 S3 SRC 

Upper microvelour 

Sizes 6 to 16 


Product code 

84282 

Product code 

84272 

TOECAP 

WATER 

PROOF 

ANTISTATIC 

TOECAP 

WATER 

RESISTANT 

ANTISTATIC 

METAL 

FREE 

MIDSOLE SRC TOECAP 

WATER 

RESISTANT 

ANTISTATIC 

MIDSOLE 

SRC 

METAL 

FREE 

MIDSOLE 

SRC 

uvex quatro pro boot 

CONFORMS TO STANDARD: EN ISO 20345:2011 S3 SRC 

Designed for demanding, rugged outdoor terrain, 

the uvex quatro pro is a hard wearing boot with 

uncompromising levels of safety and comfort. The 

durable sole combines a lighter weight impact absorbing 

centre and a hard wearing rubber outsole, with a 

tread pattern that disperses surface debris to reduce 

slip risk. uvex 3D hydroflex ® insole provides high 

impact absorption in both the heel and forefoot areas, 

minimising the potential for fatigue and lower back pain. 

The enhanced heel is specifically designed to promote 

security and confidence when climbing ladders. Bellows 

tongue design keeps debris out. Breathable textile lining. 

Outsole is heat resistant to +120°C. Antistatic. Oil and 

petrol resistant. Silicone free 



uvex Heckel SUXXEED ® boot 


Characterised by very good shock absorption and 

exceptional grip, this ultra lightweight safety boot has 

a water-resistant oiled hydrosuede leather upper and 

highly absorbent mesh liner for excellent breathability. 

Non-metallic toe cap and penetration resistant midsole 

helps reduce the overall weight and does not conduct 

the heat or cold. Anatomically shaped double density 

PU sole helps support foot, offering excellent shock 

absorption. Resistant to aggressive chemicals such as 

oils and hydrocarbons 



uvex Heckel SUXXEED ® shoe 


Characterised by very good shock absorption and 

exceptional grip, this ultra lightweight safety shoe has 

a water-resistant oiled hydrosuede leather upper and 

highly absorbent mesh liner for excellent breathability. 

Non-metallic toe cap and penetration resistant midsole 

helps reduce the overall weight and does not conduct 

the heat or cold. Anatomically shaped double density 

PU sole helps support foot, offering excellent shock 

absorption. Resistant to aggressive chemicals such as 

oils and hydrocarbons 






77


S3 Safety Boots 

NEW NEW NEW 

METAL 

FREE 

TOECAP 

WATER 

RESISTANT 

ANTISTATIC 

MIDSOLE 

SRC 

METAL 

FREE 

TOECAP 

WATER 

RESISTANT 

ANTISTATIC 

MIDSOLE 

SRC 

METAL 

FREE 

TOECAP 

WATER 

RESISTANT 

ANTISTATIC 

MIDSOLE 

SRC 

Rock Fall ® RF440A Flint Black 


CONFORMS TO EN ISO 20345:2011 S3 HRO SRC 


midsole, Flint is comfortable and lightweight, it's 

developed with specialist comfort materials including 

a shock absorbing dual density EVA nitrile rubber 

outsole and Activ-Step ® PU anti-fatigue comfort 

footbed.Water repellent full grain black leather 

Protective fibreglass toecap and composite 

anti-penetration flexi-midsole. Moisture wicking 

breathable mesh fabric lining. Shock absorbing dual 

density EVA nitrile rubber outsole. Activ-Step ® PU 

anti-fatigue comfort footbed 



Code: 102047 

Rock Fall ® RF440B Flint Brown 




Flint is comfortable and lightweight, it's developed with 

specialist comfort materials including a shock absorbing 

dual density EVA nitrile rubber outsole and Activ-Step ® 

PU anti-fatigue comfort footbed. Water repellent full 

grain brown nubuck. Protective fibreglass toecap and 

composite anti-penetration flexi-midsole. Moisture 

wicking breathable mesh fabric lining. Shock absorbing 

dual density EVA nitrile rubber outsole. Activ-Step ® PU 

anti-fatigue comfort footbed 



Code: 102110 

Rock Fall ® RF440C Flint Honey 




midsole, Flint is comfortable and lightweight, it's 

developed with specialist comfort materials including 

a shock absorbing dual density EVA nitrile rubber 

outsole and Activ-Step ® PU anti-fatigue comfort 

footbed. Water repellent honey nubuck. Protective 


flexi-midsole. Moisture wicking breathable mesh 

fabric lining. Shock absorbing dual density EVA 

nitrile rubber outsole. Activ-Step ® PU anti-fatigue 

comfort footbed 



Code: 102109 

NEW 

TOECAP 

ANTISTATIC 

MIDSOLE 

SRC 

WATER 

RESISTANT 

TOECAP 

ANTISTATIC 

MIDSOLE 

SRC 

WATER 

RESISTANT 

METAL 

FREE 

TOECAP 

WATER 

RESISTANT 

ANTISTATIC 

MIDSOLE 

SRC 

Tuf Waxy 

Ankle Safety Boot with Midsole 


Fully lined with breathable comfort lining. Padded 

collar. Cushioned footbed. Anti-static dual density 

sole with ladder grips 



Code: 102625 

Tuf Pro Chukka 



Speed lacing system. Padded collar and tongue. 

Dual density polyurethane anti-static sole 



Code: 102070 

Rock Fall ® RF670 

Graphite Lightweight Safety Boot 



Graphite is comfortable and lightweight, it's developed 

with specialist comfort materials including an Activ- 

Step ® shock absorbing PU outsole and Activ-Step ® 

PU anti-fatigue comfort footbed. Water repellent full 

grain black leather. Protective fibreglass toecap and 

composite anti-penetration flexi-midsole. Moisture 

wicking breathable mesh fabric lining. Activ-Step ® 

shock absorbing PU outsole. Activ-Step ® PU anti-fatigue 


• Size 3-16 (Includes sizes 6.5 and 10.5) 


Code: 102114 

78

S1P Safety Boots and Shoes 

TOECAP 

ANTISTATIC 

MIDSOLE 

SRA 

NEW 

METAL 

FREE 

TOECAP 

ANTISTATIC 

MIDSOLE 

SRC 

TOECAP 

ANTISTATIC 

MIDSOLE 

SRC 


DEWALT Laser 6" Hiker 


CONFORMS TO EN 20345:2011 200 JOULES S1P SRA 

Industrial boot with quality leathers and mesh uppers 

for breathability. Padded collar and tongue for comfort. 

Injected PU/TPU sole for comfort and durability. TPU 

reinforced heel for extra support. Dual density antibacterial 

insole for comfort and odour reducing 



Code: 106014 

Manufacturer’s code: DWF-50031 

Rock Fall ® RF0007 

Marble Lightweight Safety Boot 

CONFORMS TO EN ISO 20345:2011 S1P SRC 


midsole. Marble is comfortable and lightweight, 

it's developed with specialist comfort materials 

including a shock absorbing dual density 

PU nitrile rubber outsole and Activ-Step ® PU 

anti-fatigue comfort footbed. Full grain black 

leather with breathable mesh panels. Protective 



fabric lining. Shock absorbing dual density 

PU nitrile rubber outsole. Activ-Step ® PU antifatigue 




Code: 102035 

Dr Martens 

Benham Safety Boot with Midsole 

CONFORMS TO EN 20345:2011 200 JOULES S1P HRO SRC 

Athletic style safety hiker with breathable mesh upper. 

Padded collar for comfort. Nitrile rubber outsole for 

durability heat resistant to 300°C. Removable 

contoured and cushioned footbed for extra comfort. 

Stainless steel midsole 




NEW 

TOECAP 

ANTISTATIC 

MIDSOLE 

SRC 

TOECAP 

ANTISTATIC MIDSOLE SRC LADIES SIZES 

WATER 

RESISTANT 

TOECAP 

ANTISTATIC 

MIDSOLE 

SRC 

ProMan 

TC310 Oregon 

Chelsea Safety Boot 


Protective toecap and midsole, Oregon is 

lightweight and developed with premium 

materials including an Activ-Step ® shock 

absorbing dual density PU outsole. 

Water repellent smooth black leather. Protective 

steel toecap and stainless steel anti-penetration 

midsole. Moisture wicking breathable mesh 

fabric lining. Activ-Step ® shock absorbing PU 




Code: 100157 

Tuf Dealer Safety Boot with Midsole 

CONFORMS TO EN 20345:2011 200 JOULES S1P SRC 

Elastic gusset and pull on heel loop. Cushioned footbed. 

Anti-static dual density sole. Stainless steel midsole 



• Width: Wide fit 

Code: 195053 

Tuf Lace-Up 

Safety Shoe with Midsole 


Leather upper, padded collar. Anti-static sole. Pierce 

resistant steel midsole 

• Size 6-12 (full sizes only)) 


Code: 142021 

79


Safety Rigger Boots 

A range of classic rigger boots specifically designed to uplift the old traditional image with smarter styling, 

greater attention to detail, and superior quality. 

TOECAP 

ANTISTATIC 

MIDSOLE 

SRC 

WATER 

RESISTANT 

LADIES SIZES 

TOECAP 

ANTISTATIC 

MIDSOLE 

SRC 

WATER 

PROOF 

TOECAP 

ANTISTATIC 

MIDSOLE 

SRC 

Tuf Warm Lined Rigger Safety Boot 

with Midsole 


Smooth leather with pull on loops. Ankle padding for 

extra support and protection. Anti-static, dual density 

polyurethane sole unit. Pierce resistant stainless 

steel midsole 


• Colour: Tan 

Code: 101198 

METAL 

FREE 

TOECAP 

ANTISTATIC 

MIDSOLE 

SRC 

WATER 

PROOF 

Rock Fall ® RF70 Texas 2 Non Metallic 

Rigger Boot with Midsole 

CONFORMS TO EN20345:2011 200 JOULES S3 WR HRO HI CI SRC 

Lightweight and highly robust. 100% Non-Metallic and 

waterproof, developed with specialist durability materials 

including FORCE10 ® components and waterproof 

Activ-Tex ® membrane. Protective fibreglass toecap and 

composite anti-penetration flexi-midsole. Oil tanned crazy 

horse leather with Activ-Tex ® Waterproof Membrane. 

Enhanced comfort footbed and foam padded collar. Highly 

durable FORCE10 ® scuff cap and solid nitrile rubber 

outsole. Rubber kick off protector and pull loops 



Code: 101106 

Tuf Lined Rigger Safety Boot 

with Midsole 


Grain leather, fleece lining, with slip resistant, 

shock absorbing sole. Anti-static, dual density 

polyurethane sole unit. Pierce resistant stainless 

steel midsole 



Code: 198204 

NEW 

METAL 

FREE 

TOECAP 

WATER 

RESISTANT 

TOECAP 

ANTISTATIC 

MIDSOLE 

SRA 

WATER 

PROOF 

MIDSOLE 

SRC 

Dr Martens Turbine 

Safety Rigger Boot with Midsole 


Fully waterproof rigger boot with Smartmask PU 

cushioned footbed for ultimate comfort and safety. 

Industrial oiled corrected full grain leather. Padded ankle 

and collar for comfort. HBR waterproof membrane with 

foam backed mesh lining for comfort and breathability. 

Nitrile rubber outsole - contact heat resistant to 300 

degrees C. Pierce resistant non-metallic midsole 



Code: 100512 

Dunlop Purofort ® Rig-Air 


CONFORMS TO EN 20345:2011 200 JOULES S5 CI 

Polyurethane body – 100% waterproof and insulated 

down to -20°C. Anti-bacterial lining. Anti-static sole and 

pierce resistant stainless steel midsole 



Unlined 

Code: 101108 

Fur lined 

Code: 101109 

Manufacturer’s code: C462743 P 

Manufacturer’s code: C462743 F 

Rock Fall ® RF040 Manitoba 

Freezer Rigger Safety Boot 


+ ASTM F 2413-18 M/I/C PR 

100% non-metallic, with protective toecap 

and midsole, Manitoba is a cold temperature 

boot developed with specialist materials that 

are certified for use in temperatures as low as 

-40°C, including 3M Thinsulate B600 Ultra, 

Fursulate fur lining and a shock absorbing solid 

nitrile rubber outsole. It features a no. 8 YKK side 

zip for convenience. Water repellent full grain 

black leather with no. 8 YKK side zip. Protective 


flexi-midsole. 3M Thinsulate B600 Ultra fur 

lining - certified to -40°C. Shock absorbing nitrile 

rubber outsole. Anti-fatigue fur EVA footbed 



Code: 101135 

80

SB Safety Footwear 

A range of footwear with classic styling and basic safety toe cap protection only. 


TOECAP 

SRC 

TOECAP 

SRC 

DeWalt Apprentice SB Safety Boot 

CONFORMS TO EN20345:2011 

Premium cow full grain leather (Black) - For longer wear PVC kick guard - To 

protect heel when removing boots. Padded suede tongue and PU Collar. Stainless 

steel toecap (200 joules). PU anti-bacterial footbed 


Colour: Honey Code: 106012 


DeWalt Explorer Safety Boot with Midsole 

CONFORMS TO EN20345:2011 200 JOULES SBP HRO SRA 

Honey nubuck leather upper with PU collar. Padded ankle and collar for comfort. 

Goodyear welted rubber outsole for strength and durability. Rubber outsole contact 

heat resistant to 300°C. Pierce resistant stainless steel midsole 



Code: 106020 

TOECAP 

SRA 

TOECAP MIDSOLE SRA 

TOECAP 

SRA 

LADIES SIZES 

Dr Martens 

Icon Leather Safety Boot 

CONFORMS TO EN 20345:2011 200 JOULES SB SRA 

Iconic Dr Martens Airwair safety boot, with 

Cosmo ® Pibitex lining and Smartmask ® footbed 

for high comfort. Full leather upper. Dr. Martens air 

cushioned commando style sole 



Code: 101102 

Manufacturer’s code: 7B10 

Dr Martens Icon Dealer Safety Boot 


Traditional dealer boot, with full leather upper and 

black elastic gusset. Dr Martens air cushioned 

commando style sole 




Dr Martens Icon Chukka Safety Boot 


Full leather upper with Cosmo ® Pibitex lining and 

Smartmask ® footbed for high comfort. Dr. Martens air 

cushioned commando style sole 



Code: 102006 

Manufacturer’s code: 7B09 

81


Safety Trainers 

S3 Safety Trainers 

NEW 

METAL 

FREE 

TOECAP 

ANTISTATIC 

MIDSOLE 

SRC 

NEW 

METAL 

FREE 

TOECAP 

ANTISTATIC 

MIDSOLE 

SRC 

TOECAP MIDSOLE SRC 

Rock Fall ® RF120 TeslaDRI 

ESD Midcut Safety Trainer Boot 

CONFORMS TO EN ISO 20345:2011 S3 ESD SRC + EN 

61340-5-1:2007 - ESD RATED 

TeslaDRI is a specialist style developed with a major 

automotive manufacturer and has been tested 

strict ESD standards. It's 100% Non-Metallic and 

manufactured with advanced comfort materials. 


flexi-midsole. Sympatex ® Climate upper 

provides highest breathability. Ortholite ® enhanced 

comfort footbed. Shock absorbing and non-marking 

EPR outsole. Suitable for Vegetarians, Vegans and 

wearers allergic to Chrome 



Code: 100083 

Rock Fall ® RF008 FaraDRI 

ESD Safety Trainer 

CONFORMS TO EN ISO 20345:2011 S3 ESD SRC + EN 

61340-5-1:2007 - ESD RATED 

FaraDRI is a specialist style developed with a major 

automotive manufacturer and has been tested 

strict ESD standards. It's 100% Non-Metallic and 

manufactured with advanced comfort materials. 


flexi-midsole. Sympatex ® Climate upper 

provides highest breathability. Ortholite ® enhanced 

comfort footbed. Shock absorbing and non-marking 

EPR outsole. Suitable for Vegetarians, Vegans and 

wearers allergic to Chrome 



Code: 100084 

Tuf Revolution Performance Safety 

Trainer Boot with Midsole 

CONFORMS TO EN 20345:2011 200 JOULES SBP E SRC 

Trainer boot style with suede and mesh fabric upper 

material with reflective trim flash. Brushed rubber scuff 

cap and counter support. Padded collar for comfort and 

ankle support. Split suede padded tongue for strength 

and comfort. Full length cushioned footbed. Rubber 

shock absorbent slip resistant sole. Energy absorbing 

heel unit to reduce fatigue. Pierce resistant flexible 

composite midsole 



Code: 100537 

S1P Safety Trainers 

NEW 

METAL 

FREE 

TOECAP 

ANTISTATIC MIDSOLE SRA 

TOECAP 


METAL 

FREE 

TOECAP 

ANTISTATIC 

MIDSOLE 

SRC 

Pro-Man PM4010 Boston 

Lighweight Safety Trainer 

CONFORMS TO EN ISO 20345:2011 S1P SRA 


midsole, Boston is comfortable and lightweight, 

it's developed with innovative comfort materials 

including TPU upper, a shock absorbing dual 

density EVA nitrile rubber outsole and Activ- 

Step ® PU anti-fatigue comfort footbed 



Code: 879096 

Manufacturer’s code: PM4010 

DEWALT Cutter Non-Metallic 

Safety Trainer with Midsole 

CONFORMS TO EN 20345:2011 200 JOULES S1P SRA 

Very lightweight, with fabric and mesh breathable upper 

and Aerospace lining. Dual density anti-bacterial insole. 

EVA/rubber cemented sole. Rubber toe guard, composite 

toe cap. Pierce resistant midsole 



Code: 106011 

Manufacturer’s code: DWF-60086-126 

Tuf Pro Safety Trainer 

Shoe with Midsole 


Leather upper with dual density anti-static sole. Padded 

collar, tongue. 

Pierce resistant stainless steel midsole 



Code: 143004 

82

NEW 


uvex 2 trend 

Affordable quality and comfort 

Whether working indoors or outdoors, the uvex 2 trend safety 

footwear range incorporates numerous proven technologies at an 

affordable price. 

Made with either high quality abrasion resistant microvelour or smooth 

leather, the uvex 2 trend is available a range of protection classes S1, 

S2 and S3. There is also a BOA® Fit System option for fast, effortless 

precision fit and adjustment. 

Contact us to find out more on this new range! 

First-class comfort 

Safe slip resistance 


twisting 

NEW 

NEW 

METAL 

FREE 

ANTISTATIC 

MIDSOLE 

SRC 

METAL 

FREE 

TOECAP 

WATER 

RESISTANT 

ANTISTATIC 

MIDSOLE 

SRC 

Rock Fall ® RF110 AirTech ESD Boa Safety Trainer 

CONFORMS TO EN ISO 20345:2011 S1P SRC + EN 61340-4-3:2018 ESD 

100% non-metallic and ESD rated, with protective toecap and midsole, AirTech 

is comfortable and lightweight, it's developed with specialist comfort materials 

including a 3D printed mesh upper, BOA ® Fit System, shock absorbing dual 

density EVA nitrile rubber outsole and Ortholite ® climate breathable footbed. Highly 

breathable mesh upper with 3D printed styling and Boa® fit system. Protective 

fibreglass toecap and composite anti-penetration flexi-midsole. Moisture wicking 

breathable mesh fabric lining. Shock absorbing dual density EVA nitrile rubber 

outsole. Ortholite ® climate breathable footbed 



Code: 874792 

ProMan PM4050 Atlanta Safety Trainer 

100% non-metallic, with protective toecap and midsole, Atlanta is comfortable 

and lightweight, it’s developed with innovative comfort materials including water 

repellent single knit upper, a shock absorbing dual density EVA nitrile rubber 

outsole and Activ-Step ® PU anti-fatigue comfort footbed. Water repellent single knit 

upper. Protective fibreglass toecap and composite anti-penetration flexi-midsole. 

Moisture wicking breathable mesh fabric lining. Shock absorbing dual density EVA 

nitrile rubber outsole. Activ-Step ® PU anti-fatigue comfort footbede 



Code: 100025 

83


Safety Shoes 

NEW 

METAL 

FREE 

TOECAP 

WATER 

RESISTANT 

MIDSOLE 

ANTISTATIC 

SRC 

NEW 

METAL 

FREE 

TOECAP 

LADIES SIZES 

WATER 

RESISTANT 

MIDSOLE 

ANTISTATIC 

SRC 

METAL 

FREE 

TOECAP 

WATER 

RESISTANT 

MIDSOLE 

ANTISTATIC 

SRC 

TOECAP 

ANTISTATIC 

SRC 

ProMan Brooklyn 

Executive Brogue Safety 

Shoe 

CONFORMS TO EN 20345:2011 

200 JOULES S3 SRC 

Brogue detailed design, soft full grain 

waxy smooth leather with abrasionresistant 

lining and EVA foam comfort 

footbed with energy absorbing 

technology. Smooth leather for smart 

executive finish. Strobel stitched for 

increased durability. Metal-free toe 

cap and pierce-resistant midsole 



Code: 100258 

ProMan PM4004 Austin 

Safety Shoe 


100% non-metallic, with protective 

toecap and midsole, Austin is lightweight 

and developed with premium materials 

including an Activ-Step ® shock absorbing 

dual density PU outsole and Activ-Step ® 

PU anti-fatigue comfort footbed. Water 

repellent smooth black leather. Protective 

fibreglass toecap and composite antipenetration 

flexi-midsole. Moisture 

wicking breathable mesh fabric lining. 

Activ-Step ® shock absorbing PU outsole. 

Anti-fatigue EVA footbed 



Code: 100255 

U-Power London 

Executive Composite Safety 

Shoe with Midsoles 



Soft full grain waxy smooth leather with 

abrasion-resistant lining and EVA foam 

comfort footbed with energy absorbing 

technology. Padded collar for improved 

comfort. Smooth leather for smart 

executive finish. Metal-free toe cap and 

pierce-resistant midsole 



Code: 100257 

Tuf Executive 

Gibson Safety Shoe 

- Denver 


200 JOULES S1 

Leather upper with padded collar. 

High abrasion resistant lining. 

Dual density PU sole with energy 

absorbing heel unit for comfort and 

reduced fatigue 



Code: 142024 

TOECAP 

SRA 

TOECAP 

WATER 

RESISTANT ANTISTATIC LADIES SIZES SRC 

TOECAP 

ANTISTATIC 

MIDSOLE SRC 

TOECAP 

WATER 

RESISTANT 

ANTISTATIC 

MIDSOLE 

SRC 

LADIES SIZES 

Dr Martens Icon 

Leather Safety Shoe 


200 JOULES SB SRA 

Smart, durable Dr. Martens classic, 

upgraded with Smartmask ® 

PU-cushioned footbed. Industrial strength 

leather. Unbeatable underfoot comfort of 

air-cushioned sole 




Code: 142349 

Tuf Unisex Microfibre 

Slip-on Safety Shoe 



Lightweight technology, with microfibre 

uppers that are resistant to many oils, 

acids and chemicals. Machine washable 

at 30°C for two washes. Padded collar 

and full length footbed for comfort. Antistatic 

dual density slip resistant soles. 

Steel toe caps 



Code: 198624 

Dr Martens Keadby 

Safety Shoe with Midsole 


200 JOULES S1P HRO SRC 

Multi-purpose safety shoe with full grain 

leather upper. Padded collar and tongue 

for comfort. Smartmask ® PU cushioned 

footbed. Nitrile rubber outsole heat 

resistant to 300°C. Pierce-resistant 

stainless steel midsole 


Code: 143017 

Tuf Safety Shoe 

with Midsole 

CONFORMS TO EN 20345: 2011 


Classic style work shoe with smooth 

leather upper. Padded collar and tongue 

for comfort. Abrasion resistant mesh 

fabric lining. Full length foam fabric 

footbed. Energy absorbing heel to 

reduce fatigue. Pierce resistant stainless 

steel midsole 



Code: 143625 

84

Specialist Safety Boots 

NEW NEW NEW 

TOECAP 

ANTISTATIC 

MIDSOLE 

SRC 

WATER 

RESISTANT 

LADIES SIZES 

METAL 

FREE 

TOECAP 

WATER 

RESISTANT 

ANTISTATIC 

MIDSOLE 

SRC 

METAL 

FREE 

TOECAP 

WATER 

RESISTANT 

ANTISTATIC 

MIDSOLE 

SRC 


Rock Fall ® RF800 PowerMax 

High Leg Waterproof Electrical 

Hazard Safety Boot 

CONFORMS TO EN ISO 20345:2011 SB P CI E FO WRU 

HRO WR SRC + ASTM F 2413-18 M/I/C EH PR + AS 

2210.3:2019 SB P CI E FO WRU HRO WR SRC 


midsole, PowerMax is an electrical hazard linesman 

boot developed with specialist durability materials 

that are certified to withstand electrical risks of 

18kV in accordance with the ASTM F2412-18 

test method, including FORCE10 ® components, 

Helcor ® abrasion resistant leather, Moisture-tech 

by Sympatex ® waterproof membrane, IMPACT 

SHIELD , R-TEN thread and Ortholite ® climate 

breathable footbed. The sole and upper are also 

compatible with most common climbing irons 



Code: 102107 

Rock Fall ® RF328 Chatsworth 

Electrical Hazard Chainsaw 


CONFORMS TO EN ISO 20345:2011 SB P E WRU FO CI 

HRO WR SRC + ASTM F 2413-18 M/I/C EH PR + BS EN 

17249:2013 











compatible with most common climbing irons. Steel 

toecap to conform with BS EN 17249:2013 and is 

a class 3 electrical hazard chainsaw boot developed 

with specialist durability materials that are certified 

to withstand chain speeds of 63MPH and electrical 

risks of 18kV in accordance with the ASTM F2412- 

18 test method 



Code: 100079 

TOECAP 

METAL 

FREE 

WATER 

PROOF 

ANTISTATIC 

NEW 

MIDSOLE 

Rock Fall ® RF910 Surge Waterproof 

Electrical Hazard Safety Boot 

CONFORMS TO EN ISO 20345:2011 SB P E WRU FO CI HRO 

WR SRC + ASTM F 2413-18 M/I/C EH PR 


Surge is developed with specialist durability materials 

that are certified to withstand electrical risks of 18kV 

in accordance with the ASTM F2412-18 test method, 

including FORCE10 ® components, an Activ-Tex ® 

waterproof membrane and Activ-Step ® PU anti-fatigue 

comfort footbed. Disclaimer: Protective fibreglass toecap 

and composite anti-penetration flexi-midsole. Activ- 

Tex® waterproof and breathable bootie membrane - 

tested for 8 hours (5 times longer than EN requirement). 

Dual density PU nitrile rubber outsole - tested to 

extraordinary abrasion, heat and cold performance 

levels. Activ-Step ® PU antifatigue comfort footbed* 



Code: 102115 

*View product data sheets for full specifications 

METAL 

FREE 

NEW 

TOECAP 

Rock Fall ® RF140 Volta 

Electrical Hazard Boa Safety Trainer 

CONFORMS TO EN ISO 20345:2011 SB P E WRU FO SRC + 

ASTM F 2413-18 M/I/C PR EH 

Protective toecap and midsole, Volta and Ohm are 

lightweight electrical hazard styles developed with 

specialist comfort materials that are certified to 

withstand electrical risks of 18kV in accordance with 

the ASTM F2412-18 test method, including BOA ® Fit 

System, shock absorbing dual density EVA nitrile rubber 

outsole and Ortholite ® climate breathable footbed 



Code: 102111 

WATER 

RESISTANT 

ANTISTATIC 

MIDSOLE 

SRC 

Rock Fall ® RF810 Arc High Leg 

Waterproof Electrical Hazard 

Safety Boot 

CONFORMS TO EN ISO 20345:2011 SB P CI E FO WRU 

HRO WR SRC + ASTM F 2413-18 M/I/C EH PR + AS 

2210.3:2019 SB P CI E FO WRU HRO WR SRC 











compatible with most common climbing irons. 

independently put through IEC 61482-1-1:2019 

test method and features fire resistant laces* 



Code: 102068 

METAL 

FREE 

NEW 

TOECAP 

Rock Fall ® RF160 Ohm 

Electrical Hazard Boa Safety Boot 

CONFORMS TO EN ISO 20345:2011 SB P E WRU FO SRC 

+ ASTM F 2413-18 M/I/C PR EH 

Protective toecap and midsole, Volta and Ohm are 

lightweight electrical hazard styles developed with 

specialist comfort materials that are certified to 

withstand electrical risks of 18kV in accordance with 

the ASTM F2412-18 test method, including BOA ® 

Fit System, shock absorbing dual density EVA nitrile 

rubber outsole and Ortholite ® climate breathable 

footbed 



Code: 102112 

WATER 

RESISTANT 

ANTISTATIC 

MIDSOLE 

SRC 

Disclaimer: All this footwear is Electrical Hazard and tested in accordance with the test method as set out within ASTM F2412-18. This protection deteriorates 

rapidly in humid, damp and wet environments and with wear. Electrical Hazard (EH) Safety footwear is intended as secondary source protection equipment. 

85


Safety Wellingtons 

a new era 

IN SAFETY FOOTWEAR 

Brightboot 

Orange Mid 

Code: 874992 

• Hydro Control 

• 100% Waterproof 

• Thermal Defence 

• Crush Protection 

Brightboot 

Orange Tall 

Code: 874989 

• Resistant 

• Anti-fatigue 

• Oil Resistant 

• Stability & Anti-slip 

Brightboot 

Yellow Mid 

Code: 874994 

• Pierce Protection 

• 360° High Visibility 

Brightboot 

Yellow Tall 

Code: 874993 

GREAT VALUE 

Dunlop Purofort ® Food Wellingtons 

WATER 

PROOF 

MIDSOLE 

LADIES SIZES 

SRA 

TOECAP 

WATER 

PROOF 

LADIES SIZES 

SRA 

Dunlop ® introduces a new 

generation of Purofort ® 

wellingtons explicitly 

designed for the Food 

Processing Industry. These 

wellingtons offer addition to 

all of the benefits of Purofort ® 

technology, solutions based 

on all the specific needs within 

this industry with the addition 

of anti-bacterial lining and extra 

smooth upper, easy to clean in 

boot washer for cleanliness. 

Tuf Safety Wellingtons 

with Midsole 

CONFORMS TO EN 20345:2011 200 

JOULES S5 SRA 

PVC with PVC/nitrile sole; oil, acid, 

alkali, fat resistant. Ribbed heel with 

kick-off tab to assist removal. Pierce 



• Colour: Black with Black sole 

Code: 165022 

Tuf Food Industry Safety 

Wellingtons 


JOULES S4 SRA 

PVC with PVC/nitrile sole; oil, acid, 

alkali, fat resistant. Ribbed heel to 

assist removal 


• Colour: White with White sole 

Code: 165020 

TOECAP 

WATER 

PROOF 

Dunlop Purofort ® FoodPro MultiGrip Safety Boot 

CONFORMS TO EN 20345:2011 200 JOULES S4 CI SRC 

CA61131 Recognised food industry safety boot. 

Recognised food industry safety boot. Specifically designed to offer the highest slip 

resistance in (semi-) solid contaminated areas. Upper insulated down to -20°C. Stays 

flexible even at low temperatures. Durable and shock absorbant. Anti-slip sole resistant 

to: mineral, animal and vegetable oils and fats, manure, blood, disinfectants, solvents 

and various chemicals 


•Colour: White with Blue sole 

Code: 160759 

ANTISTATIC LADIES SIZES 

SRC 

Manufacturer’s code: CA61131 

86


WATER 

ANTISTATIC 

TOECAP 

MIDSOLE 

PROOF SRA ANTISTATIC 

TOECAP 

MIDSOLE 

SRA 

WATER 

PROOF 

LADIES SIZES 

TOECAP 

ANTISTATIC 

WATER 

PROOF 

MIDSOLE 

SRA 

TOECAP 

ANTISTATIC 

MIDSOLE 

SRA 

WATER 

PROOF 

LADIES SIZES 


Dunlop Purofort ® Thermo 

Plus Full Safety Wellington 



S5 CI SRC 

Lightweight, durable; polyurethane 

Thermo+ upper and sole can withstand 

conditions down to -50°C. Resistant to 

minerals, animal and vegetable oils and 

fats, disinfectants, manure, solvents and 

various chemicals. Heat retaining sole. 

Shock absorbing technology. Flexible 

upper – ease of movement. Pierce 

resistant stainless steel midsole 


• Colour: Orange with Blue sole 

Dunlop Purofort ® Full Safety 



JOULES S5 CI SRC 

Polyurethane upper and sole – acid, 

alkali, oil, fat resistant. Anti-static sole. 

Washable nylon lining. Pierce resistant 

steel midsole 


• Colour: Black with Black sole 

Dunlop Purofort ® 

Professional 

Safety Wellingtons with 

Midsole 


S5 CI SRA 

Polyurethane upper, with anti-static, 

energy absorbing, cold-insulating sole. 

Acid, oil, fat resistant. Washable nylon 

lining. Pierce resistant steel midsole 


• Colour: Yellow with Black sole 

Dunlop Purofort ® 

Professional Safety 

Wellingtons with Midsole 


S5 CI SRA 

Polyurethane upper, anti-static, energy 

absorbing, cold-insulating sole. 

Acid, oil, fat resistant. Washable nylon 

lining. Pierce resistant steel midsole 


• Colour: Green with Black sole 

Code: 164774 

C662343 


Code: 164050 

C762041 


Code: 164773 

C462241 


Code: 160746 

C462933 


TOECAP 

WATER 

PROOF 

ANTISTATIC 

MIDSOLE 

TOECAP 

MIDSOLE 

WATER 

PROOF SRA 

TOECAP 

WATER 

PROOF 

SRA 

LADIES SIZES 

Dunlop Non-Safety 

Wellington Boots 

LADIES SIZES 

SRA 

WATER 

PROOF 

LADIES SIZES 

Dunlop Protomaster 


with Midsole 


200 JOULES S5 SRA142 PP 

PVC/nitrile upper and sole; acid, 

base, disinfectant resistant. 

Washable nylon lining. Pierce 



• Colour: Black with black sole 

Manufacturer’s code: 142 PP 

Code 165012 

Dunlop Acifort Ribbed Safety 

Wellingtons with Midsole 


200 JOULES SBP SRA 

PVC/nitrile upper and sole; acid, alkali, 

oil, fat resistant. Washable nylon lining. 

Pierce resistant stainless steel midsole 


• Colour: Black with Red sole 

Manufacturer’s code: A252931 

Code: 164512 

Dunlop Protomaster 



200 JOULES SB SRA 

PVC/nitrile upper and sole; resists acids, 

bases, disinfectants, blood. Antibacterial 

washable lining. 

Anti-slip sole 


• Colour: White with Green sole 

Manufacturer’s code: 171BV 

Code: 164040 

Dunlop Pricemaster 

Non-Safety Wellingtons 

PVC upper and sole; resistant to low 

concentration acids, alkalis, disinfectants. 

Nylon lining, water resistant 


380PP Colour: Black with Black sole 

Manufacturer’s code: 380PP 

Code: 164036 

380VP Colour: Green with Black sole 

Manufacturer’s code: 380VP 

Code: 164034 

87


Ladies Safety Footwear 

Designed and manufactured specifically for ladies, these stylish and comfortable 

shoes contribute to improving the work experience without compromising on quality. 

NEW 

METAL 

FREE 

TOECAP 

WATER 

RESISTANT 

ANTISTATIC 

METAL 

FREE 

TOECAP 

WATER 

RESISTANT 

ANTISTATIC 

NEW 

TOECAP 

WATER 

PROOF 


LADIES SIZES 

MIDSOLE 

SRC 

LADIES SIZES 

MIDSOLE 

SRC 

Rock Fall ® VX870 Lily 

Womens Fit Safety Trainer 



midsole, Lily is comfortable and lightweight, it's 

developed with premium materials including a 

shock absorbing dual density EVA nitrile rubber 

outsole. The Rock Fall womens range is made on 

a womens shoe mould making it more slender and 

better fitting. Lily is part of the Rock Fall Stepping 

Up Campaign which sees a donation made to 

charitable causes for every pair sold. Full grain grey 

nubuck with breathable mesh panels. Protective 



fabric lining. Womens fitting shock absorbing nitrile 

rubber outsole. Anti-fatigue EVA footbed 



Code: 102108 

Rock Fall ® VX850 Jasmine 

Womens Fit Safety Trainer 



Jasmine is comfortable and lightweight, it's developed 

with premium materials including a shock absorbing dual 

density EVA nitrile rubber outsole and Ortholite ® climate 

breathable footbed. The Rock Fall womens range is made 

on a womens shoe mould making it more slender and 

better fitting. Jasmine is part of the Rock Fall Stepping 

Up Campaign which sees a donation made to charitable 

causes for every pair sold. Water repellent full grain black 

nubuck. Protective fibreglass toecap and composite antipenetration 

flexi-midsole. Moisture wicking breathable 

mesh fabric lining. Womens fitting shock absorbing dual 

density EVA nitrile rubber outsole. Ortholite ® climate 

breathable footbed 



Code: 102103 

Rock Fall ® Vixen Onyx 

Ladies Fit Safety Boot 

CONFORMS TO EN ISO 20345:2011 

S3 HI WR HRO SRC 

Lightweight and stylish ladies safety boot 

suitable for Construction. 100% Non-Metallic 

and waterproof developed with comfort in mind. 


flexi-midsole. Premium full grain waxy 

leather with Activ-Tex ® Waterproof Membrane. 

Enhanced comfort footbed and foam padded collar. 

Shock absorbing ladies fitting nitrile rubber outsole. 

Manufactured using a woman's footwear last 


Colour: Honey 

Manufacturer’s code: VX950C 

Code: 102069 

Colour: Black 

Manufacturer’s code: VX950A 

Code: 102061 

TOECAP 

WATER 

RESISTANT 

ANTISTATIC 

TOECAP 

WATER 

RESISTANT 

ANTISTATIC 

TOECAP 

ANTISTATIC 

MIDSOLE 

MIDSOLE 

SRC 

MIDSOLE 

SRC 

SRC 

Rock Fall ® Vixen Emerald 

Ladies Fit Safety Boot 


Lightweight and stylish ladies safety boot. It's 

manufactured on a woman's footwear last and can be 

worn with trousers in the office environment. Protective 

steel toecap and composite anti-penetration fleximidsole. 

Premium full grain leather upper with moisture 

wicking lining. Enhanced comfort footbed and foam 

padded collar. Shock absorbing ladies fitting PU outsole. 




Rock Fall ® Vixen Amber 

Ladies Fit Safety Shoe 


Lightweight and stylish ladies safety shoe. It's 

manufactured on a woman's footwear last and can be 

worn with trousers in the office environment. Padded 

collar and tongue for comfort. Protective steel toecap 

and composite anti-penetration flexi-midsole. Premium 

full grain leather upper with moisture wicking lining. 

Enhanced comfort footbed and foam padded collar. 

Shock absorbing ladies fitting PU outsole. Manufactured 

using a woman's footwear last 



Rock Fall ® Vixen Pearl 

Ladies Fit ESD Safety Trainer 

EN ISO 20345:2011 S1P ESD SRC + EN 61340-5-1:2007 - 

ESD RATED 

Tested strict ESD standards. 100% Non-Metallic. 


flexi-midsole. Navy suede upper with 

moisture wicking lining. Enhanced comfort footbed and 

foam padded collar. Shock absorbing ladies fitting PU 

outsole. Manufactured using a woman's footwear last 


• Colour: Navy/Blue 

Code: 102062 

Manufacturer’s code: VX500 

Code: 102053 


Code: 102052 


88


TOECAP 

METAL 

FREE 

ANTISTATIC 

SRC TOECAP 

ANTISTATIC 

SRC 

METAL 

FREE 


uvex 1 Shoe 


This multipurpose safety trainer is ultra light with a sole that has been specifically 

designed for indoor environments and provides excellent grip. The pivot point 

within the tread pattern reduces pressure on joints when twisting and turning. 

The dual layer, low weight PU sole, with removable antistatic comfortable insole, 

delivers outstanding impact absorption minimising potential back, knee and joint 

problems particularly when standing. Elastic laces allow shoes to be quickly 

adjusted, slipped on or off and expand and contract as your feet swell and cool 

throughout the day - standard laces also provided. Virtually seamfree design 

made from microvelour material to eliminate pressure points. Made from synthetic 

materials making shoes suitable for vegans and people allergic to chrome. Metalfree 

toecap (tested to 200 joule EN ISO 20345) and midsole does not conduct 

heat or cold 




uvex 1 Boot 


This multipurpose safety boot is ultra light with a sole that has been specifically 

designed for indoor environments and provides excellent grip. The pivot point 

within the tread pattern reduces pressure on joints when twisting and turning. 

The dual layer, low weight PU sole, with removable antistatic comfortable insole, 

delivers outstanding impact absorption minimising potential back, knee and joint 

problems particularly when standing. Elastic laces allow shoes to be quickly 

adjusted, slipped on or off and expand and contract as your feet swell and cool 

throughout the day - standard laces also provided. Virtually seamfree design 

made from microvelour material to eliminate pressure points. Made from synthetic 

materials making shoes suitable for vegans and people allergic to chrome. Metalfree 

toecap (tested to 200 joule EN ISO 20345) and midsole does not conduct 

heat or cold 




TOECAP 

WATER 

RESISTANT ANTISTATIC 

SRC 

METAL 

FREE 

TOECAP 

WATER 

RESISTANT ANTISTATIC 

SRC 

METAL 

FREE 

add uvex tune up 

Arch support insoles for 

uvex 1 and uvex 2 

Antistatic insoles designed to 

increase the wearer comfort by 

providing optimum support for the 

arches of the feet, helping to 

reduce foot fatigue 

uvex 1 Ladies Shoe 


Made specifically for the contours of the female foot. This 

multipurpose safety trainer has an ultra light design, with a sole 

that has been specifically designed for indoor environments, 

provides excellent grip. Other features include ones described 

above for the uvex 1 black and yellow version 


• Colour: Grey/Pink 

uvex 1 Ladies Perforated Shoe 


Made specifically for the contours of the female foot. This ultra 

light multipurpose safety trainer is perforated making it suitable 

for working in warm conditions, those with hot feet or during 

the summer months. Other features include ones described 

above for the uvex 1 black and yellow version 


• Colour: Grey/Pink 




89



WATER 

ANTISTATIC 

TOECAP 

RESISTANT 

MIDSOLE SRC 

TOECAP 

WATER 

RESISTANT 


Rock Fall ® Vixen Topaz Ladies Slip-On Safety Shoe 


Lightweight and stylish ladies safety shoe. Can be worn with trousers in the 

office environment. Protective steel toecap and composite anti-penetration fleximidsole. 

Premium full grain leather upper with moisture wicking lining. Enhanced 

comfort footbed and foam padded collar. Shock absorbing ladies fitting PU outsole. 




Code: 143806 


Pro-Man PM100 Chukka Boot with Steel Midsole 


Dual density PU sole. Black leather chukka boot. Deep padded collar. Water resistant. 

Steel toe cap midsole 



Code: 430475 

Manufacturer’s code: PM100 

NEW 

NEXT GENERATION 

WOMENS RANGE 

FROM ROCK FALL 

SPECIFICATION: 

EN ISO 20345:2011 S3 HRO SRC 

100% NON-METALLIC, WITH PROTECTIVE TOECAP AND 

MIDSOLE, RUBY IS COMFORTABLE AND LIGHTWEIGHT, IT’S 

DEVELOPED WITH SPECIALIST DURABILITY MATERIALS 

INCLUDING A SHOCK ABSORBING EVA NITRILE RUBBER 

OUTSOLE. THE ROCK FALL WOMENS RANGE IS MADE ON 

A WOMENS SHOE MOULD MAKING IT MORE SLENDER AND 

BETTER FITTING. 

ROCK FALL RF951 RUBY WOMENS FIT 

CHELSEA SAFETY BOOT 

SIZE UK 3-8 

Rock Fall ® RF951 Ruby Womens Fit Chelsea Safety Boot 


comfortable and lightweight, it’s developed with specialist durability materials including 

a shock absorbing EVA nitrile rubber outsole. The Rock Fall womens range is made on a 

womens shoe mould making it more slender and better fitting. Water repellent full grain 

waxy brown leather. Protective fibreglass toecap and composite anti-penetration fleximidsole. 

Moisture wicking breathable mesh fabric lining. Womens fitting shock absorbing 

dual density EVA nitrile rubber outsole. Ortholite ® climate breathable footbed 



Code: 102065 

Manufacturer’s code: RF951 

90

Footwear Accessories 

Insoles 

Safety Overshoe 


uvex hydroflex GEL insoles 

Breathable natural cork with active coal 

prevents foot odour. Shock absorbing 

GEL in heel area helps reduce foot 

fatigue and potential musculoskeletal 

ailments. Effective ventilation 


Manufacturer’s code: 9598.2 

Code: 170005 

Cush ’N’ Step Insole 

100% polyurethane foam. Overlaid with 

soft latex layer. Covered hard wearing 

polyester. Washable at 40°C 


Code: 170002 

Impacto ® Turbotoe Safety Overshoe 

Built-in 200 joule steel toe cap – fits over low-heel, dress 

and running shoes and most boots. Protects toe area from 

accidental impact, crushing or stubbing. Easily cleaned and 

reusable. Ideal for environments with risk of toe damage or 

has steel toe cap requirement. Perfect for visitors, casual 

or temporary workers, management, clerical, sales people. 

Colours vary according to UK sizes (see table) 

• Size: 4.5-14 

Code: 170020 

UK SIZES 

IMPACTO ® TURBOTOE 

COLOUR SIZE GUIDE 

Grey 4.5 - 5.5 

White 6 - 7.5 

Yellow 8 - 9.5 

Red 10 - 11.5 

Blue 12 - 13 

Green 13 - 14 

Work Force Heat Holders 

Reinforced Socks 

Patented long loop cushion pile to hold more warm air 

close to the skin. 

91% Acrylic, 5% Nylon, 3% Polyester, 1% Elastane. 

Reinforced heel and toe 


• Fits 6-11 

Manufacturer’s code: BSMHH81H1BLK 

Code: 364052 

BlueGuard 

Anti-Abrasion 

Durability Socks 

High strength filament polymers bound and 

engineered for maximum abrasion. Comfort fit, cotton 

rich body, reinforced toe seam. 63% Cotton, 32% 

Polyamide, 4% Polypropylene, 1% Lycra Elastane 


• Size: 6-8½, 9-11 

Manufacturer’s code: SBM21H1BLK 

Code: 364050 

Tuf Revolution 

Heavyweight Twin Pack Socks 

Elasticated reinforced rib. Internal Comfort Zone. 

Extra padded toe & heel support 

• Fits 7-12 

Code: 364033 

Endurance Thermal 

Seaboot Stockings 

54cm (21") seaboot hose. 

Ultra warm. 

50% artificial fibre, 50% wool 


• 54cm (21") seaboot hose 

Code: 364026 

Cherry Blossom 

Shoe Deodorant Spray 

Keeps footwear fresher for longer. 

Deodorises ad destroys odours caused 

by bacteria 


Code: 508454 

Cherry Blossom 

Shoe/Boot Polish 



Code: 508607 Each £2.67 

91

Respiratory Protection 

Buying Guide 

Selecting the correct protection 

The selection of Respiratory Protection follows a basic four-step method: 

• Identify the hazards – dust, metal fume, gas, vapour 

• Assess the hazards – assess the hazard level/other protection – skin and eye 

• Select the proper respirator – disposable, half mask, full face, powered, airline 

• Training in fitting and use – to optimise respiratory protection 

FILTER MARKINGS 

For use against 

Gas and 

Vapour 

(EN 14387 

and 

EN 405) 

Filter Colour 

Type Code Main Applications 

A Brown 

Organic Vapours with boiling point greater 

than 65˚C and good warning properties 

B Grey 

Inorganic gases and vapours, E.g. Chlorine 

(not Carbon Monoxide) 

E Yellow 

Acid gases and vapours, E.g. Sulphur Dioxide, 

Hydrogen Chloride 

K Green Ammonia and organic ammonia derivatives 

P White Particulate 

Hg Pink Mercury Vapour 

AX 

Brown 

Certain organic compounds with boiling points 

less than 65°C & good warning properties 


Legislation Update Amended 

Standard EN 149:2001+A1:2009 

EN 149:2001 was superseded by an amended version, EN 

149:2001+A1:2009 (EN 149+A1) in July 2009. Changes 

included the introduction of two usability classifications 

for disposable respirators; single shift only devices nonreusable 

(shown through marking “NR”) and reusable 

devices (marked ‘R’). 

The amended European Standard EN 149:2001+A1:2009 

states that all reusable devices (marked ‘R’) must 

withstand being cleaned and disinfected using a method 

provided by the manufacturer. This change, along with 

new performance requirements, is intended to give the 

user further confidence in respirators providing continuous 

respiratory protection in hazardous environments. 

All particle filtering half masks featured fully conform to EN 

149:2001+A1:2009 

Disposable respirators that have passed the optional 

Dolomite clogging test have a suffix ‘D’ listed in their 

conformity standards. 

Particles 

(EN 143 

and EN 149) 

P1 White Protection against particulates 



S White Solid 

L White Liquid 

DUSTS 

Produced when solid 

materials are broken 

down into finer particles, 

the longer the dust 

remains in the air the 

easier it is to inhale. 

MISTS 

Tiny liquid droplets 

formed by atomisation 

and condensation 

processes such as 

spraying. Mists are often 

combinations of several 

hazardous ingredients. 

METAL FUMES 

Occur when metals 

are vaporised under 

high heat. The vapour 

is cooled quickly and 

condenses into very 

fine particles that float 

in the air. 

GASES 

Airborne at room 

temperature. Able 

to diffuse or spread 

freely, can travel 

very far very quickly. 

VAPOURS 

Gaseous state of 

substances that are 

liquids or solids at 

room temperature. 

Formed when 

substances evaporate 

in the way water vapour 

evaporates from water. 


Respirators are tested to the relevant European Standards 

and CE marked. All respirators carry the CE mark plus the 

European Standard and performance category markings. 

EN 149 – Filtering face piece and particulate 

respirators 

EN 405 – Valved filtering half mask respirators for 

gases and/or particulates 

EN 140 – Half mask face pieces 

EN 136 – Full face pieces 

EN 137 

– Self-contained open-circuit compressed 

air breathing apparatus 

EN 143 – Particulate filters 

EN 146 

EN 147 

EN 270 

EN 402 

EN 529 

– Powered respirators – hoods & helmets 

– Powered – full face masks 

– Heavy duty supplied air 

– Escape Apparatus. SCBA with full face 

mask or mouthpiece assembly 

– Respiratory selection, use and care 

EN 1146 – Compressed air escape apparatus with 

hood 

EN 1835 

– Light duty supplied air 

EN 12941 – Powered respirators – hoods and helmets 

EN 12942 – Powered respirator Full face masks 

EN 14387 – 

Gas & vapour filters 

Respiratory Terminology 

92 

Workplace Exposure Limit (WEL) 

Airborne concentration of a Hazardous Substance, averaged over a specified time 

period referred to as a Time Weighted Average (TWA). 

WEL Time Periods 

There are two reference periods for which WELS may be set; 8 hour Time Weighted Average 

(TWA) and 15 minute Short Term Exposure Limit (STEL). A substance may be assigned WELS 

at either one or both reference periods. 

8 hour TWA – some adverse health effects can occur after prolonged or accumulated exposure. 

The 8 hour TWA is set to restrict the total intake by inhalation over one or more shifts. 

15 minute STEL – Some adverse health effects may be seen after short exposures. 15 minute 

STEL may be applied to control these effects. 

Immediately Dangerous to Life or Health (IDLH) 

The IDLH concentration of a substance is defined as “that which poses a threat of exposure 

to airborne contaminants when that exposure is likely to cause death or immediate or delayed 

permanent adverse health effects or prevent escape from such an environment”. The IDLH value 

represents a maximum concentration from which a worker would escape within 30 minutes 

without any impairing symptoms or irreversible health effects. 

Under current legislation, employers are responsible for providing 

suitable respiratory protection to employees who need it, however 

they must also provide training in its use, maintenance of the 

equipment and keeping maintenance documents.



93


NEW 

3M Cool Flow 

Comfort Valve 

Making great 

things possible. 

Comfortably. 

3M Aura 9300+Gen3 

Third generation respirator. 

94

Cooler 

breathing * 

>36% more 

air flow * 

Easier 

to put on * 


More 

durable * 

New Cool Flow 

Comfort Valve. 

More airflow, less heat 

inside the respirator. 

Ŕ Opens 37% easier * 

Ŕ Allows more than 36% 

extra flow through 

the valve * 

Ŕ Provides a cooler 

breathing experience 

3M Advanced 

Electret Media 

(AEM). 

Filtering the air 

with the help of 

electrostatic charges. 

Ŕ High charge on filter 

fibres attracts particles 

from a wider capture area, 

enabling less filter media 

to be needed 

Now with 3M 

Safe Guard . 

NEW 3M Safe Guard 

product authentication 

process. 

Ŕ Check online that your 

product is a genuine 3M 

manufactured product 

Ŕ Visit 3M.com/SafeGuard 

for more information 

Retail display 

options available. 

Contact your account 

manager for a range of 

retail display options 

for the 3M Aura 

Gen3 Respirator. 

Ŕ Low initial breathing 

resistance 

3M Aura Particulate Respirator 9300+Gen3 Series option. 

Unvalved 

Valved 

3M Aura 9320+Gen3 3M Aura 9330+Gen3 3M Aura 9322+Gen3 3M Aura 9332+Gen3 

Pack of 20 

Code: 292739 

Pack of 20 

Code: 292741 

Pack of 10 

Code: 292740 

Pack of 10 

Code: 292742 

*Versus previous 3M Aura 9300+ Series 

95


Disposable Particulate Respirators 

FFP1 Valved Respirators 

Protection Factor: APF 4 

Typical Applications: Low levels (up to 4 x WEL) of fine dust and oil or water-based mists typically found during hand 

sanding, drilling and cutting. All particle filtering half masks featured fully conform to EN 149:2001+A1:2009. 

MADE IN THE UK 

Dräger X-plore ® 1910V Mask 

Dräger X-plore ® 1900V is a high-performance, singleuse 

dust mask for protection against fine dust and 

particles. The premium particle filtering mask is available 

in two sizes, combining ease of use, exceptional comfort 

and optimal fit. For the highest degree of safety – even 

for people wearing spectacles. Pack of 10 

Manufacturer’s code: 395196/195 

Code: 432814 

Dräger X-plore ® 1310V 

Moulded Respirator 

Pre-formed respirator offering comfort and secure 

fitting. Provides protection against fine dust, solid 

and liquid particles. Assigned Protection Factor = 4. 

Box of 10 


3M 8812 Cup-Shaped Valved 

Dust/Mist Respirator 

CONFORMS TO EN149:2001 +A1:2009 

Protection against fine respirable dusts. 3M Cool 

Flow valve. Assigned Protection Factor = 4. Box of 10 



96 

3M Aura 9312+ Flat-Fold Valved Dust/Mist Respirator 


3M Cool Flow valve. Soft cover web for comfort and excellent fit. Individually 

packed, flat-fold. Assigned Protection Factor = 4. Box of 10 

Code: 292744 Manufacturer’s code: 9312+ 

Dräger X-plore ® 1710V Fold Flat Respirator 

Fold flat respirator offering comfort and secure fitting. Provides protection against fine 

dust, solid and liquid particles. CoolMAX exhalation valve offering easy breathing and 

comfort. Assigned Protection Factor = 4. Box of 10 

Code: 431092 Manufacturer’s code: 3951081


FFP1 Cup-Shaped Unvalved Respirators 

A range of reliable quality disposable respirators designed to protect the wearer 

against solid aerosols, dust, mists, powders and accompanying odours. 




3M 8710E Cup-Shaped Dust/Mist 

Respirator 

Protection against fine respirable dusts. Assigned 

Protection Factor = 4. Box of 20 

Code: 292452 

Manufacturer’s code: 8710E 

Dräger X-plore ® 

1310 Moulded Respirator 

Pre-formed respirator offering comfort and secure fitting. 

Provides protection against fine dust, solid and liquid 

particles. Assigned Protection Factor = 4. Box of 20 


3M 9913 Dust/Mist 

Nuisance Odour Respirator 

CONFORMS TO EN 149:2001 FFP1 NR D 

Protection against fine dusts, unpleasant smells, 

nuisance levels of organic vapours. Lightweight, 

comfortable. Convex shape, twin-strap, nose-clip. Good 

conformance to most face shapes and sizes. Assigned 

Protection Factor = 4. Below WEL for organic vapours. 

Box of 20 


FFP1 Flat Fold Unvalved Respirators 


3M Aura 9310+ 

Flat-Fold Dust/Mist Respirator 


Protection against fine respirable dusts. Soft cover web 

for comfort and excellent fit. Individually packed, flatfold. 

Assigned Protection Factor = 4. Box of 20 


Dräger X-plore ® 1910 Mask 

Dräger X-plore ® 1900 is a high-performance, single-use 

dust mask for protection against fine dust and particles. 

The premium particle filtering mask is available in two 

sizes, combining ease of use, exceptional comfort and 

optimal fit. For the highest degree of safety – even for 

people wearing spectacles. Pack of 20 

Code: 432812 Manufacturer’s code: 3951911/910 

Dräger X-plore ® 1710 

Fold Flat Respirator 

Protection against fine respirable dusts. Soft cover web 

for comfort and excellent fit. Individually packed, flatfold. 



97



FFP2 Fold Flat Respirators 


3M Aura 9322+ Flat-Fold Valved Dust/Mist Respirator 

CONFORMS TO EN149:2001 FFP NR.D 

3M Cool Flow valve. Individually packed flat fold respirator. 


Code: 292746 


Dräger X-Plore ® 1720 FFP2 Fold Flat Respirator 

CONFORMS TO EN149:2001 + A1:2009 FFP2 NR D 

Fold flat respirator offering comfort and secure fitting. Provides protection against fine 

dust and solid and liquid particles found in construction, manufacturing, agricultural 

and service industries. Assigned Protection Factor = 10 

Unvalved Code: 431093 Manufacturer’s code: 3951083 Box of 20 

Valved Code: 431094 Manufacturer’s code: 3951084 Box of 10 

Dräger X-Plore ® 1920 Mask 

Dräger X-plore ® 1900 is a high-performance, single-use dust mask for protection 

against fine dust and particles. 

The premium particle filtering mask is available in two sizes, combining ease of 

use, exceptional comfort and optimal fit. For the highest degree of safety – even 

for people wearing spectacles 

Unvalved Manufacturer’s code: 3951921/920 

Code: 432816 Pack of 20 

Valved Manufacturer’s code: 3951926/925 


Respair Fold Flat P2 Respirator 

Respair Fold Flat P2 Respirator 

Unvalved Code: 430803 Box of 20 


Valved Code: 430804 Box of 10 

FFP2 Cup Shaped Respirators 


3M 8322 Cup-Shaped Valved Dust/Mist Respirator 

CONFORMS TO EN149:2001 FFP NR.D 

Protection against fine dusts, water- and oil-based mists. 3M Cool Flow valve. Cushioned lining, 

braided headbands, M-nose clip offer extra comfort. 



98


FFP2 Cup Shaped Respirators 


3M 8825+ 

Soft Cup-Shaped 

Valved FFP2 



+ A1:2009 FPP2 R D 

Protection against fine dusts, mists and metal fumes. 

3M Cool Flow valve. Premium comfort, lightweight design. 

Soft inner seal for improved comfort and fit. High performance increased filter 

size for effective filtration. Adjustable braided buckle straps for additional comfort. 



Dräger X-Plore ® 1320 FFP2 

Moulded Respirator 


+ A1:2009 FFP2 NR D 

Preformed respirator offering comfort and secure fitting. Provides protection against 

fine dust and solid and liquid particles which are found in construction, manufacturing, 

agricultural and service industries. Assigned Protection Factor = 10 

Valved Manufacturer’s code: 3951213 

Code: 431086 Box of 20 

Unvalved Manufacturer’s code: 3951214 

Code: 431087 Box of 10 




3M 8822 

Cup-Shaped Valved 

Dust/Mist Respirator 


Protection against fine dusts, water-and 

oil-based mists. 3M Cool Flow valve. 

Convex shape helps reduce heat. Comfortable protection, particularly in hot/humid 

conditions. Assigned Protection Factor = 10. Box of 10 


3M 9922 

Valved Particulate/ 

Nuisance Level Organic 

Vapour Relief Respirator 


Protection against fine dusts, oil- and water-based mists, welding respiratory 

hazards (i.e. Fumes, ozone). Relief from unpleasant odours plus nuisance 

levels of organic vapours from solvents, degreasers, resins. 3M Cool Flow 

valve. For woodworking, foundry operations, waste management, lab settings, 

agriculture, petrochemical, welding. Assigned Protection Factor = 10. Box of 10 


FFP3 Cup Shaped Valved Respirators 

Protection Factor: APF 20 Typical Applications: Higher levels of fine dust (up to 20 x WEL) and oil or water 

based mists typically found when handling hazardous powders in the pharmaceutical industry or work with 

biological agents and fibres. All particle filtering half masks featured fully conform to EN 149:2001+A1:2009. 



3M Particulate 

Respirator 8835+ 


+ A1:2009 FPP3 R D 

Protection against fine dusts. 

New filter construction and large 

surface area for easier breathing. 

The 3M Cool Flow valve effectively removes exhaled air, 

reducing heat and moisture build up improving comfort. New face 

seal design reduces fogging of eyewear. Can be re-used subject 

to company's policy. Assigned Protection Factor = 20. Box of 5 


3M 8833 

Cup-Shaped Valved 

Dust/Mist/Metal Fume 


CONFORMS TO EN149: 20001 FFP3 R D 

Reliable, effective protection against fine 

particulates. 3M Cool Flow valve. Soft inner 

face-seal ring - secure face fit, increases 

wearer comfort. Cleanable sealing ring, 

additional testing – use for more than one shift. 



Dräger X-plore ® 1330V 

Valved Moulded Respirator 

Preformed respirator with the added benefit of 

CoolMAX exhalation valve Provides protection 

against fine dust, solid and liquid particles 

which are found in construction, manufacturing, 

agricultural and service industries. Assigned 

Protection Factor = 20. Box of 5 


99



FFP3 Fold Flat Valved Respirators 

Dräger X-plore ® 1730V Fold Flat Valved Respirator 

Fold flat respirator with the added benefit of the CoolMAX exhalation valve. Easy 

breathing, comfort and secure fitting. Provides protection against fine dust, Solid and 

Liquid particles which can be found in construction, manufacturing, agricultural and 

service industries. Assigned Protection Factor = 20. Box of 15 


Check out the NEW 3M AURA Gen3 

Particulate Respirator on page 89… 

NEW 

JSP Springfit Fold Flat 

The NEW SpringFit fold flat 

disposable mask achieves an 

unrivalled secure fit with the use of 

a unique endoskeleton structure. 

The unique Typhoon valve has 

been designed to reduce breathing 

resistance, heat and moisture build 

up. The valve is unaffected by any 

moisture, and therefore can be used 

with the same performance under 

very low temperatures (-40ºC tested). 

Pack of 10 


BGA182-206-000 

Code: 292451 

Dräger X-Plore ® 1930 FFP3 

Protection against solid and liquid particles. Available in two sizes 

Unvalved 

Manufacturer’s code: 395 1930/31 


Valved 

Manufacturer’s code: 395 1935/36 



100 

3M Aura 9332+ Fold Flat 

Valved Dust/Mist/Metal Fume Respirator 

CONFORMS TO EN149: 2001 + A1: 2009 FFP3 NR D 

Soft cover web - for comfort and excellent fit. 3M Cool Flow valve. Individually 

packed, flat fold. Assigned Protection Factor = 20. Box of 10 

Code: 292747 Manufacturer’s code: 9332+

Reusable Respirators - Half Masks 


Quick latch 

convenience. 

The 3M 6500 Series reusable half mask respirators 

drop down without the need to remove hard hats or 

faceshields when lowering and raising the respirator, 

with the convenient quick latch mechanism. The easy 

on and off mask allows you to move in and out of 

contaminated areas effortlessly. 


Code: 292603 

3M 6500 Series reusable 

half mask respirator. 

Code: 292664 See page 110 

Use with the 6035 P3 filters 

and carry out a simple daily 

face seal check. 

3M Reusable Half Mask Respirator Kit 


3M medium half mask with A2P3R filters. Soft silicone 

face piece for comfort and durability. Balanced, secure 

fit. Low maintenance for maximum convenience. 

Replaceable filters, see page 110 

Size: Medium 

Manufacturer’s code: RTU7523M8 

Code: 292601 

Size: Large 

Manufacturer’s code: RTU7523L 

Code: 292611 

3M 7500 Series Half Mask Respirator 


Ultimate in comfort and advanced technology. Very 

pliable face seal – exceptional comfort and fit. Innovative 

exhalation valve – decreases breathing resistance. 

Silicone mask. Supplied without filters, see page 110 

Size: Medium 


Code: 292606 

Size: Large 


Code: 292607 

3M 6000 Series Half Mask Respirator 


Classic, lightweight, industry standard. Dependable 

lightweight value. Combines good protection with 

economy in use. Low maintenance (only selected spares 

available). Supplied without filters, see page 110 

Size: Medium 

Manufacturer’s code: 6200M 

Code: 292630 

Size: Large 

Manufacturer’s code: 6300L 

Code: 292631 

101



BEST SELLER 

GVS Elipse Half Mask Respirator 

with Ready Fitted P3 filters 

CONFORMS TO EN 140:1998 AND EN 143:2000. APF:20 

Perfect for everyday use in construction and utilities through to the more 

demanding environments of metalworking, welding & stonemasonry. Latex and 

silicone free, lightweight TPE face piece that is comfortable to wear for long 

periods of time. Low profile filters provide unobstructed field of vision. Suitable 

against Silica Dust. Weighs less than 135g with filters. Sizes: S/M, M/L 

Code: 292261 

Manufacturer’s code: SPR299/501 

GVS Elipse P3 Construction Dust Replacement Filters 

Pack of 2 

Code: 292262 

Manufacturer’s code: SPR316 

GVS Elipse Dust Mask Carry Case 

Hard storage case for GVS Elipse P3 and P3 Nuisance Odour half masks. Hard Carry Case for the GVS Elipse 

Respirator. Fits both size respirators SPR299, SPR501, SPR337 and SPR502. Durable hard carry case that protects 

and stores the mask when not in use. Strong nylon loop in the back allows the case to be worn on the belt or 

attached in other various ways 

Code: 431536 

Manufacturer’s code: SPM001 

GVS Elipse Half Mask with Ready Fitted P3 Nuisance Odour 

Filters 

For protection against harmful particles and nuisance fumes, with filters ready 

fitted. Extremely lightweight and compact to give the wearer as much comfort as 

possible A unique and low profile filter designed to fit the contours of your face to 

give you maximum field of vision . Low breathing resistance to reduce the risk of 

user fatigue and to add additional comfort . Fitted with a charcoal pad to help filter 

nuisance odours. Sizes: S/M, M/L 

Code: 431929 


GVS Elipse P3 Nuisance Odour Replacement Filters 

Pack of 2 

Code: 431930 


GVS Elipse Half Mask Respirator 

with Ready Fitted A1-P3 filters 

CONFORMS TO EN 140:1998 AND EN 14387:2004. WITH P3 APF:20 

Designed to protect against solid and liquid particles such as dusts and mists, along 

with vapours and organic gases. Used in a variety of workplace applications including 

petrochemical, chemical manufacturing, construction, transportation, paint spraying 

and solvents. Latex and silicone free, lightweight TPE face piece that is comfortable to 

wear for long periods of time. Low profile filters provide unobstructed field of vision. 

Sizes: S/M, M/L 

Code: 292263 


GVS Elipse A1-P3 Organic Gases & Vapours Replacement Filters 

Pack of 2 

Code: 292264 


102



GVS Elipse 

Integra Half 

Mask Respirator 

with Ready 

Fitted P3 Filters 

GVS Elipse Integra Half Mask with 

Ready Fitted ABEK1P3 Filters 

CONFORMS TO EN166, EN140 AND EN14387 

Integrated with safety eyewear to offer both respiratory 

and eye protection. ABEK1P3 combination filters to 

protect against multiple gasses, vapours and dust 

particles . Anti-mist and Anti-scratch KN rated lens. 

Curved filter technology to offer a more compact fit. 

Extremely lightweight, only 441gm. Made in the UK. 

Available in S/M and M/L 

Code: 432403 Manufacturer’s code: SPR 534/35 

GVS Elipse Integra Half Mask with 

Ready Fitted A2P3 Filters 


Integrated with safety eyewear to offer both respiratory 

and eye protection. A2P3 combination filters to protect 

against organic vapours and dust particles. Anti-mist 

and Anti-scratch KN rated lens . Curved filter technology 

to offer a more compact fit .Extremely lightweight, only 

441gm. Made in the UK. Available in S/M and M/L 

Code: 432404 


CONFORMS TO EN 140: 1998 AND EN 143: 2000 APF200 

Integrated safety goggle with respirator in one complete 

unit. When fitted correctly, the goggle cannot steam. 

K & N anti-mist and anti-scratch coatings as standard. 

Manufactured in the UK. Available in S/M and M/L 

Code: 292259 


GVS Elipse P3 Construction Dust 

Replacement Filters 

CONFORMS TO EN166 AND EN143 

Pack of 2 

Code: 292262 


GVS Elipse Integra Replacement 

ABEK1P3 Filters 


Pack of 2 

Code: 292276 


GVS Elipse Integra Replacement 

A2P3 Filters 


Pack of 2 

Code: 292278 


GVS Elipse Integra 

Carry Case 


Code: 432061 

GVS Elipse Half Mask 

with Ready Fitted A2P3 Filters 

GVS Elipse Half Mask 

with Ready Fitted ABEK1P3 Filters 

GVS Elipse Integra Mask 

with Ready Fitted A1-P3 RD Filters 


For protection against Organic vapours, dusts, mists and 

fumes. Compact and lightweight. Manufactured in UK. 

Extremely low breathing resistance. 



Protection against vapours, ammonia, acid gases, 

dusts, mists and fumes. Compact and lightweight. 

Manufactured in UK. Extremely low breathing resistance. 



Integrated safety goggle with respirator in one complete 

unit. When fitted correctly, the goggle cannot steam. 

Anti-mist and anti-scratch coatings as standard. 

Manufactured in the UK. Available in S/M and M/L 

Code: 431529 


Code: 431532 


Code: 431535 


GVS Elipse 

Replacement 

A2P3 Filters 

GVS Elipse 

Replacement 

ABEK1P3 Filters 

GVS Elipse 

Replacement 

A1-P3 RD Filters 


Pack of 2 


Pack of 2 


Pack of 2 

Code: 431530 


Code: 431533 


Code: 292264 


103


Code: 292603 

Code: 292664 See page 106 

Breathe easy 

in cool comfort. 

3M Maintenance-Free Reusable Respirator, 

4000+ Series and the 3M Cool Flow Fan, 1040 Series. 

Attaching simply and securely to the 3M Maintenance-Free Reusable Respirator, 

4000+ Series, 3M Cool Flow Fan 1040 Series helps to draw heat and moisture 

away from your face, helping you to stay cool and focus on the task at hand. 

Welcome to a cooler, more comfortable future. Try it for yourself. 

Code 290517 

104

Over 

30% 

reduction in 

exhalation breathing 

resistance * at higher 

work rates 


Breathing 

made easier. 

3M Maintenance-Free Reusable Half Mask, 4000+ Series 

Engineered for improved breathing ease, this evolution of 3M’s most popular maintenance‐free reusable 

half mask is convenient to use, reassuringly reliable and now offers measurable improvements in comfort. 

Breathing comfort 

Ŕ New enhanced exhalation 

valve assembly reduces 

breathing resistance 

by over 30% 

Convenient to use 

Ŕ Ready‐to‐use, 

maintenance‐free 

construction with 

integrated filters 

3M 4251+ 

FFA1P2 R D 

3M 4255+ 

FFA2P3 R D 

3M 4277+ 

FFABE1P3 R D 

3M 4251+ 

FFABEK1P3 R D 

Wearer comfort 

Ŕ Lightweight and 

well‐balanced mask with 

soft and flexible face seal 

Clean storage 

Ŕ Resealable bag provides 

convenient and clean 

storage between uses 

Proven reliability 

Ŕ First choice 3M reusable 

respirator across Europe 

since its introduction 

over 25 years ago 

3M 4000+ Reusable Respirators Conforms to EN 405:2001 

3M 

code 

Description Protection Protection against: Typical applications Code 

4251+ Organic 

vapour/particulate 

respirator 

4255+ Organic 

vapour/particulate 


4277+ Organic 

vapour/inorganic 

and acid gas 

particulate 


4279+ Organic 

vapour/inorganic, 

acid gas and 

ammonia particulate 


A1 

A2 

P2 

P3 

A1 B1 E1 P3 

A1 B1 E1 K1 P3 

Gases/ 

vapours 

protection 

level 

10 x WEL 

or 1000ppm 

(whichever 

is lowest) 

11 x WEL 

or 5000ppm 

(whichever 

is lowest) 

12 x WEL 

or 1000ppm 

(whichever 

is lowest) 

13 x WEL 

or 1000ppm 

(whichever 

is lowest) 

Organic 

gases/ 

vapours 

Inorganic 

gases/ 

vapours 

Acid gas Ammonia Particulates 

FFP2: 10x WEL 

(water and 

oil based) 

Particulates 

FFP3: 20x WEL 

(water and 

oil based) 

General paint spraying/ 

adhesive spraying/creosoting/ 

solvent spraying/paint 

stripping/boat building/ 

vehicle manufacturing 

General paint spraying/ 

adhesive spraying/mixing 

agricultural chemicals/ 

creosoting/solvent spraying/ 

paint stripping/boat building/ 

aerospace manufacturing/ 

vehicle manufacturing 

Burn stripping for paint 

removal/electro‐plating/ 

grinding/polishing/finishing 

cured epoxy resins/metal 

pickling/metal etching/acid 

cleaning 

Burn stripping for paint 

removal/using ammonia 

solutions/agrochemicals/ 

manufacture and maintenance 

of refrigeration equipment 

290513 

290514 

290515 

290516 

* Exhalation breathing resistance of 3M 4000+ reduced by >30% for 120lpm peak exhalation flow and >35% for 160lpm 

compared to 3M 4000 Series. Results measured by 3M in 2017 under laboratory conditions. 

Pleace recycle. Printed in the UK. © 3M 2019. 3M is a trademark 

of 3M Company. All rights reserved. J467905 

105



ALL CONFORM TO EN140 

JSP ® FORCE 8 Respirator 

Mask Only 


SForce 8 twin cartridge half mask 

with Typhoon valve 

• Superior low breathing resistance 

• 4-point suspension harness with 

quick release buckles 

• Made with durable thermoplastic 

rubber, offering a superior fit to 

most face shapes 

• Accepts the full range of low profile 

Force 8 filters, offering flexibility 

• Used for many applications, 

providing filtering protection 

against particulates, many gases 

and vapours 

• Supplied without filters 

• Size: S, M, L 

Code: 292315 

JSP ® FORCE 8 Filter 

Press To Check 

P3 Construction Dust 



Code: 292307 



A2P3 Organic Gas Vapour + Dust 



AND EN14387 

Code: 292309 

JSP ® FORCE 8 One Size 

Mask with Pre-Fitted P3 

Filters 

CONFORMS TO EN140, 

FILTERS TO EN143 

Respirator Force 8 Half Mask 

includes With Press To Check 

P3 Construction Dust. 

Filters Ready Fitted 

Code: 292306 



ABEK1P3 Multi-Gas Vapour + Dust 



AND EN14387 

Code: 292311 

106 

3M Scott Safety 

AVIVA 40 Half Mask 


Single filter half mask utilising the Pro2000 range of filter. Reflex seal absorbs 

facial movements, maintaining protection. Easy to use leak check mechanism. 

Goggle pinch - designed for improved eye PPE integration. Enhanced voice 

intelligibility. Comfortable, durable head cradle suitable for use 

underneath headwear. Supplied without filter, see page 110 

Size: S, M, L Manufacturer’s code: 800501/2/3 

Code: 430765

Reusable Respirator Half Masks & Full Face Masks 

Half Face Respirators 

Dräger X-plore ® 3300/3500 

half face respirator 

A perfect combination: modern design and light weight offer you extra protection 

and comfort. Choose from the low-maintenance, cost-effective Dräger X-plore ® 

3300 half mask or Dräger X-plore ® 3500 version for long lasting protection under 

tough conditions. Supplied without filers 


3300 

Code: 431102 Size: small Manufacturer’s code: R55331 

Code: 431101 Size: medium Manufacturer’s code: R55330 

Code: 431100 Size: large Manufacturer’s code: R55332 

3500 

Code: 431106 Size: medium Manufacturer’s code: R55350 

Code: 431105 Size: large Manufacturer’s code: R55352 

MAIN FEATURES 

• Dräger specific bayonet connection (twin-filter system) 

• mask body made from Soft-TPE or DrägerFlex material (silicon free) 

• to be used with X-plore Bayonet filters 

Full Face Mask 


full face respirator 

Double layer face seal with triple sealing action ensuring reliable secure leak free 

protection. Swept back low-profile filter position. Distortion free, polycarbonate 

impact resistant lens. Easily adjustable head harness for secure and balanced fit 

Code: 431110 

Manufacturer’s code: R55270 

MAIN FEATURES 

• Double layer face seal 

• Low profile filter position 

• Wide angle lens 

• Easily adjustable head harness 

• Triple sealing action 

Dräger Spare Filters 

TO FIT DRÄGER X-PLORE ® 3300/3500 HALF MASK AND 5500 FULL FACE RESPIRATOR 

CONFORMS TO EN 143:2000/A1 AND/OR EN 14387 

Type & Colour 

Code 

P3 

Application 

X-plore ® bayonet fit particulate filter. 


Code 

431050 

A2 

P3 

X-plore ® bayonet fit Organic Gas, Vapour and particulate 

combination filter. Manufacturer’s code: 6738875 

431030 

A1 B1 E1 

K1 Hg P3 

X-plore ® bayonet fit Organic, Inorganic and acid gases 

and vapours, Ammonia, Mercury Vapour and Particulate 

combination filter. Manufacturer’s code: 6738817 

431026 

107


Reusable Respirator Full Face Masks 



Full Face Mask 

CONFORMS TO EN 136 CLASS 2 (CE MARK), NIOSH, AS/NZS. 

Made from robust and hypoallergenic EPDM, featuring a double layer face seal. 

Comfort fit on just about any shape of face with its universal “one size fits all”. 

Anti fog visor. Scratch proof and distortion free visor offering 180° wide angle. 

Supplied without filter, see below 

Code: 431320 


Dräger X-plore ® 6530 Full Face 

Mask with PC Visor 

Polycarbonate visor 


Code: 431321 

DRÄGER X-PLORE ® RD40 FILTER SELECTION 

Dräger X-plore ® RD40 Filters 

To Fit Dräger X-Plore ® 6000 Series Full Face Masks 

Type & Colour Code Application Code 

P3 1140 P3 R (incinerable) Ref 6732974 431038 

A2 P3 1140 A2 P3 RD Ref 6738860 431017 

A1 B2 E2 K1 1140 A1B2E2K1 Hg N0 P3 RD / C020 P3 RD Ref 6738801 431012 

A2 B2 E2 K2 1140 A2B2E2K2 Hg N0 P3 RD / C020 P3 RD Ref 6738814 431014 

108 

3M Scott Safety Vision 2 

Full Face Respirator 


Unique visor – almost unrestricted. 

Fully maintainable. High performance. 

Liquid silicone rubber faceseal. 

Extremely soft/comfortable. 

Supplied without filters, see page 110 

Eye impact protection (medium energy) EN 166 B 

Used with PRO 2000 Filters 

Code: 290136 

Manufacturer’s code: RFF1000/ML 

3M 6000 Series Class 1 

Full Face Respirator 


Class 1 full face mask. Protection against respiratory 

hazards plus eye and face protection. Eye impact 

protection (medium energy) EN 166 B. 

Excellent field of vision. Maximum comfort, 

good economy in use. Silicone 

face-piece. Supplied without filters, see page 110 

Size: Medium 

Code: 292267 

Size: Large 

Code: 292266 

Manufacturer’s code: 6800S 

Manufacturer’s code: 6900S 

3M Scott Safety Proflow Promask 

Full Face Mask Respirator 

CONFORMS TO EN136 CLASS 3 

012681 - Full face respirator used either with a Pro 

2000 filter (negative pressure), powered air, or a 

compressed-air-line supply (positive pressure). Unique, 

contoured T-profiling sealing edge – exceptionally low 

airflow resistance, reducing fatigue. Wide panoramic 

visor – maximises field of vision. Front mounted speech 

diaphragm – easy communication. Directed airflow 

prevents visor misting. Filter positioning reduces neck 

strain, permits good downward visibility. Supplied 

without filters, see page 110 

Code: 018179 Manufacturer’s code: 012681


Next generation comfort, 

breathability and simplicity. 

Introducing the 3M Secure Click Reusable Half Mask HF-800 Series. 

Hear it. 

Feel it. 

Check it. 

Say it. 

Work with confidence, 

provided by the all new Secure 

Click connection, that filters/ 

cartridges are installed properly. 

Simply align the connections 

and push to hear a click. 

Experience the greater 

breathability and comfort 

provided by the world’s 

first quad-flow gas and 

vapour filter/combination 

filter system. 

Increase worker confidence 

that the respirator is being 

worn properly with the easy, 

one-touch, user seal check. 

Utilise the speaking 

diaphragm designed 

to help provide easier 

communication 

while working. 

3M Secure Click Half Facepiece Reusable 

Respirator with Speaking Diaphragm 

Product description: 

HF-802SD 

Size: Medium 

Code: 

292602 

Filters 

Product description: 

3M Secure Click Particulate Filter 

P3 R D3135 

3M Secure Click Particulate and 

Nuisance Odour Filter P3 R D3138 

Code: 

292617 

292613 

Contact us for more information 

HF-803SD 

Size: Large 

292612 

3M Secure Click Gas, Vapour and 

Particulate Filter A2P3 R D8095 

3M Secure Click Gas, Vapour 

and Particulate Filter A1B1E1K1P3 R 

D8094 

292614 

292615 

109


Filter Cartridges 

3M FILTER SELECTION 

Hazardous substances are found in many industries and applications. To help you provide the right 

product solutions, 3M offers a broad range of filters to protect against gases, vapours and particulates 

Particulate Filters 

Filter Type Filter No. Protection Code 

P2R 3M 2125 Particulates only 292637 

P2R 3M 2128 Particulates, ozone, nuisance level organic vapours and acid gases 292640 


P3R 3M 2138 Particulates, ozone, nuisance level organic vapours and acid gases 292632 


Gas and Vapour Filters 


A1 3M 6051 Organic Vapour - Class 1 292633 

A1 3M 6051i Organic Vapour with Service Life Indicator - Class 1 292648 

A1 B1 E1 3M 6057 Organic and Inorganic Vapours and Acid Gas - Class 1 292636 

A1 B1 E1 K1 3M 6059 Organic and Inorganic Vapours, Acid Gas and Ammonia - Class 1 292265 

A1 Formaldehyde 3M 6075 Organic Vapour - Class 1 and Formaldehyde 293301 

A2 3M 6055 Organic Vapour - Class 2 292635 

A2 3M 6055i Organic Vapour with Service Life Indicator - Class 2 292649 

A2 B2 E2 K2 P3 3M 6099 

Organic and Inorganic Vapours, Acid Gas, Ammonia - 

Class 2 and Particulates; Full Face Masks only 

290124 

AX 

(single shift use only) 

P3 3M 6098 

Organic Vapours with a boiling point below 65ºC; Full Face 

Mask & single shift use only 

292699 

Particulate Filters to use with Gas and Vapour Filters 

Combine with 3M 6000 Series Gas and Vapour Filters for added Particulate Protection using the 3M 501 Filter Retainer. 





Filter Retainer 3M 501 n/a 292441 

3M SCOTT SAFETY FILTER SELECTION 

Scott Pro 2000 canister filters are low weight, with a low breathing 

resistance manufactured using the highest specification media 

and materials to support wearers through the most demanding 

applications. The particulate-specific filters offer unrivalled efficiency 

against dust, smoke, welding fumes, mist, micro-organisms and 

radio-active particles, whilst the Gas-specific cartridges give extended 

absorption capacity for gases and vapours. Combined cartridges are 

suitable for both gaseous and particulate contaminants. 

Scott Safety Pro 2000 Filter Canisters 

To fit Scott Safety AVIVA 40, Vision 2 Full Facemask, Duraflow Powered Air Respirator. 042799 not approved for half masks 


A2 

P3 

042670 - Organic Gases and Vapours with a boiling point of 65ºC or above, Solid and Liquid particles, Radioactive and Toxic particles, Bacteria 

and Viruses. 

293039 

B2 P3 042671 - Inorganic Gases and Vapours, Solid and Liquid particles, Radioactive and Toxic particles, Bacteria and Viruses. 292781 

A2 B2 E2 K2 P3 042799 - Organic, Inorganic, Acid Gases and Vapours, Ammonia, Solid and Liquid particles, Radioactive and Toxic particles, Bacteria and Viruses. 293091 

P3 052670 - Solid and Liquid particles, Radioactive and Toxic particles, Bacteria and Viruses. 293045 

110


The new 3M Versaflo 

Powered Air Turbo TR-600 

Please add a section for the 

bottom With half user-selectable which says: airflow rates, rugged construction and a comfortable 

3M design, Versaflo the S-Series new 3M Versaflo Powered Air Turbo TR-600 helps provide 

Headcovers durable and protection Versaflo in harsh environments. 

M-Series Headtops 

Now with an expanded range of CE-approved filters for protection 

against hazards such as particulates, organic vapours and acid gases. 

Contact us for more information. 

Also available: 

3M Versaflo Powered Air Turbo Starter Kit TR-619UK 

Ŕ Code 277335 

3M Versaflo Intrinsically Safe Powered 

Air Turbo Starter Kit TR-819UK 

Ŕ Code 879537 

111


3M Adflo 

Powered Air 


Designed especially for welders, the 3M Adflo 

Powered Air Respirator combines with a range 

of 3M Speedglas Welding Helmets to provide 

eye, face and respiratory protection as well 

as a cooler, more comfortable welding environment. 

Comfort 

Ŕ Lightweight, lithium ion rechargeable 

battery – more than 40% lighter 

than the original NiMH battery 

Ŕ Dual air flow, standard or AirFlow 

Plus for hot environments 

Ŕ Thick, durable, perforated leather 

comfort belt 

Safety 

Ŕ Audible and visual low air flow 

and low battery alarm 

Ŕ Offers an Assigned Protection 

Factor (APF) of 20 when combined 

with 9100 Air and an APF of 40 

when combined with 9100FX 

and 9100MP 

Straightforward care 

and maintenance 

Ŕ Filter loading and battery 

level indicators 

Ŕ Spare parts and accessories are 

quick, easy and intuitive to replace 

Products 

Available with the following welding helmet options: 

3M Speedglas 9100 Air Welding Helmet 

Professional welding protection 

Ŕ Ergonomically designed, unique Speedglas headband 

Ŕ Shade 5 side-windows for improved peripheral vision 

Ŕ Code 277205 

3M Speedglas 9100FX Air Welding Helmet 

Dual protection: welding and grinding 

Ŕ Ergonomically designed, unique Speedglas headband 


Ŕ Large 17x10cm curved grinding visor 

Ŕ Code 277223 

3M Speedglas 9100MP Welding Helmet 

Multi-protection: welding, grinding and hard hat 


Ŕ Large 17x10cm curved grinding visor 

Ŕ Head protection (EN397) 

Ŕ Code 277209 

All three 3M Speedglas Welding Helmets are available fitted with a choice of 3 auto-darkening filters: V (45 x 93mm), 

X (54 x 107mm) or XX (73 x 107mm), offering seven variable dark shades (5, 8, 9-13) and adjustable sensitivity. 

For further information please contact your Service Centre. 

112

Speciality Respirators and Kits 

3M Versaflo TR-300+ Powered Air Respirator 

The 3M Versaflo range simplifies the equipment selection process, increases 

system versatility and improves user comfort every step of the way. 

TURBO UNIT 


3M Versaflo TR-302E+ Powered Air Turbo Unit 

This new lightweight turbo unit is the key to an easy-to-use, versatile 

respiratory protective system for environments with hazardous particles. 

Battery charge indicator on the battery, plus the 2 selectable flow rate 

options - 185l/min and 205l/min - offer more comfort to the user 

Code: 277300 

Manufacturer’s code: TR-302E 

3M Versaflo Powered Air Respirator System TR-600 

The new 3M Versaflo Powered Air Respirator System TR-600 provides 

protection against particles, gases or vapours, or against a combination 

of these depending on the type of filter used. The turbo has selectable 

multiple airflows through a simple, intuitive, easy to use two-button 

operation and the particulate filter and battery status 

indicators provide constant updates during use. 

The modern, low profile design keeps weight close 

to the back resulting in greater comfort. Airflow 

selection – delivering a world of comfort to you. 

Also available as a starter kit (pictured). 

Code: 277335 

Manufacturer’s code: TR-600 

3M Versaflo TR-315+ Powered Air Starter Kit 

Comfortable airflow 

• Two user selectable flow rates to maximise 

comfort: 185l/min and 205l/min 

• Controlled airflow delivers steady flow 

as battery discharges or filter loads 

with particulates 

Ease of use 

• Electronic audible and visual alarm in case 

of low battery and/or low air flow 

• TR-300+ display shows battery charge 

status, particulate filter loading status 

during use as well as selected airflow 

• Charge status is indicated by a useful 

LED display on the battery as well as the 

outer case 

• No user calibration of turbo required 

Comfort 

• Light and small – extremely slim, 

lightweight, balanced design for comfort 

Multiple applications 

• High efficiency filter captures hazardous 

dust, mist and fume plus options for 

nuisance level gases and vapours 

• IP53 rating. Suitable for use 

in decontamination shower 

Safety 

• Approved to EN12941, TH2 or TH3 

depending on headtop 

277301 

Code: 277301 

Manufacturer’s code: TR-315+ 

This Starter Kit includes the TR-302E+ 

Turbo Unit, Particulate Filter, Pre-filter, 

Standard Belt, High Capacity Battery Charger 

Kit, Self-adjusting Breathing Tube and 

Airflow Indicator. 

If you have specific system requirements you can make up your own system with the following components: 

Turbo Unit 

3M Versaflo TR-302E+ Powered Air Turbo Unit 

This new lightweight turbo unit is the key to an 

easy-to-use, versatile respiratory protective system 

for environments with hazardous particles. This unit 

comes with an Airflow Indicator only. 277300 

Batteries (lithium ion) and Chargers 

TR-330 Standard Battery Pack 277304 

TR-332 High Capacity Battery Pack (longer life) 277305 

TR-341UK Single Station Battery Charger Kit 277306 

TR-344UK 4-Station Battery Charger Kit 277307 

Filters 

TR-3600 Pre-filter 277308 

TR-2712E Particulate Filter (P) 277309 

TR-3802E P+Nuisance Level Organic Vapour Filter 277310 

TR-3822E P+Hydrogen Fluoride +Nuisance Level 

Acid Gas Filter 

Breathing Tubes 

277311 

BT-30 Length-adjusting Breathing Tube 277312 

BT-40 Heavy Duty Rubber Breathing Tube 277313 

113


3M Jupiter Powered Air Respirator 

The many advanced features of the 3M Jupiter Turbo Unit take powered air respiratory 

protection into a new dimension of comfort and flexibility. Easy to maintain and use, it can 

feed any one of a wide range of different headtops for many hazardous environments. 

Wide choice of gas, vapour and particle filters for a broad range of applications. 

Comfort 

• Mounted on an ergonomic comfort belt 

for a snug fit that remains comfortable 

even after hours of wear 

Alarm 

• Electronic audible and visual alarm in case 

of low battery and/or low air flow 

Filters 

• Range of filter canisters for gases, vapours 

and particles 

• Filter cover which prevents spark damage 

and allows shower decontamination 

Straightforward care 

and maintenance 

• Smooth shape and decontamination 

belt allows easy cleaning 

3M Jupiter Powered Air Starter Kit 

This Starter Kit includes a standard 3M Jupiter Powered Air Turbo including 

Decontamination Belt and Clip, Filter Gaskets, Air Flow Indicator and 

Calibration Tube as well as a pair of Organic Vapour and Particulate (A2P) 

Filters, Pre-filters, Length-adjusting Breathing Tube, 8 hour Rechargeable 

Battery (NiMH) and a Battery Charger. Manufacturer’s code: RTU JUP 

276801 

If you have specific system requirements you can make up your own system with the following components: 

Turbo Unit 

3M Jupiter Turbo Unit 

Includes Decontamination Belt, Air Flow Indicator 

and Calibration Tube 

Filters 

276802 

P Filter 290095 

A2P Filter 290096 

ABE1P Filter 290098 

A2BEK1P Filter 290097 

Pre-filter Pack 290105 

Batteries and Chargers 

Battery Pack - 8 hour 200297 

Battery Pack - 4 hour 200292 

Battery Pack - 4 hour (intrinsically safe with pouch kit) 200419 

Intelligent Battery Charger 200298 

Note: A Jupiter Turbo Unit that has been used in a dust environment without an 

intrinsically safe pouch fitted, should never be used for intrinsically safe applications. 

Breathing Tubes 

BT-30 Length Adjusting Breathing Tube 277312 

BT-40 Heavy Duty Rubber Breathing Tube 277313 

For more information on 3M Respiratory Protection, get in touch with us. 

114

Powered Respirators 

3M Versaflo S-Series Headcovers and Hoods 

3M Versaflo S-Series Headcovers and Hoods have been designed using 

the latest computer modelling techniques to ensure a high level of comfort. 

They provide eye and face protection to EN 166 and are available in a range 

of fabrics and designs to suit different applications. 


Meets highest respiratory class – TH3 

Comfortable to wear for long periods 

Excellent air flow 

Improved visibility 

Assigned Protection Factor (APF) 

• When used with TR-300+, 3M Jupiter 

and V-500 – APF 40 

Integrated suspension headcovers 

• Ready to use straight out of the box 

• Suitable for applications that require frequent 

replacement of the entire headtop assembly 

• Wide faceseal with soft elastic for improved 

comfort and reduced noise 

• Available in two adjustable sizes: S/M and M/L 

3M Versaflo Headcover S-133 

• Head and face coverage, as well as providing 

eye and face protection to EN 166 – liquid 

splash and low energy impact 

• General purpose, cost-effective fabric 

Code: 277123 

3M Versaflo Hood S-433 

• Similar to S-133 but with additional 

neck and shoulder protection 

Code: 277124 

Premium reusable suspension hoods 

• Cost-effective choice for some high disposal 

rate environments 

• Just the soiled hood fabric is replaced, while 

the suspension and air ducting can be reused 

Innovative head cradle with adjustable airflow 

Open valve 

Closed 

valve 

3M Versaflo Hood S-657 

Starter Kit 

• Starter Kit includes 1x Head Cradle 

and 1x S-607 Overhood 

277332 

3M Versaflo S-607 

Replacement Overhood 

• Head, face, neck and shoulder 

coverage, as well as providing eye 

and face protection to EN166 – liquid 


• S-657 uses a double shroud design 

for its respiratory seal 

277331 

3M Versaflo S-805E 

Replacement Overhood 

• Head, face, neck and shoulder 

coverage, as well as providing eye 

and face protection to EN166 – liquid 


• S-805E incorporates a comfortable 

knitted inner collar 

277333 

The external cover lets wearers control the location of the airflow 

115


Supplied Air Respirators 

3M Versaflo M-Series Headtops 

The 3M Versaflo M-Series features lightweight, compact and 

well-balanced faceshields and helmets that offer protection from 

a range of respiratory, impact and splash hazards. 

Integrated protection for multiple hazards 

• Provides protection from specific respiratory, 

head and eye hazards 

• Optional hearing protection 

Modern, well balanced design 

• Lightweight with excellent balance 

• Fully-adjustable head suspension 

• A deflector allows users to direct the airflow inside 

the headtop for increased control and comfort 

Straightforward care and maintenance 

• Spare parts and accessories are quick, 

easy and intuitive to replace 

Visor design 

• Visor design combines excellent peripheral and 

downward vision with good optical clarity 

• Lenses provide chemical and scratch resistance 

Assigned Protection Factor (APF) 

• When used with TR-300+, 3M Jupiter or V-500 

– APF 20 (M-100) or APF 40 (M-300, APF 20 

with 3M Jupiter and M-400) 

3M Versaflo M-200 Series Faceshields – 

for respiratory, bumpcap, eye and face protection 

Two options for different applications: 

• M-206 features a coated BT rated visor and comfort faceseal 

277350 

• M-207 features a premium BT rated visor and flame resistant faceseal 

277362 

3M Versaflo M-300 Series Helmets – for 

respiratory, eye, face and head protection 


• M-306 features a general purpose faceseal for construction, 

chemical applications and heavy industry 

277352 

• M-307 features a flame resistant faceseal for applications 

with hot particles 

277353 

3M Versaflo M-400 Series Helmets – with shrouds 

for respiratory, eye, face and head protection with 

additional neck and shoulder coverage 


• M-406 features a coated BT rated visor and a highly durable shroud 

277361 

• M-407 features a premium BT rated visor and flame resistant shroud 

277364 

116


Powered Respiratory System 

The Dräger X-plore ® 8000 range was 

created for maximum respiratory and facial 

protection even under the most challenging 

of conditions. Aside from safety, comfort and 

top performance in numerous application 

fields, the X-plore ® 8000 headpieces can be 

effortlessly combined with other components 

from the X-plore ® series. Full detail on page 

114 


Code: 431289 


117


Dräger Powered Respiratory System 

Dräger X-plore ® 8000 range was created for maximum respiratory and facial protection even under 

the most challenging of conditions. Aside from safety, comfort and top performance in numerous 

application fields, the X-plore ® 8000 headpieces can be effortlessly combined with other components 

from the X-plore ® series. 

Dräger X-plore ® 8500 Blower Unit 

CONFORMS TO EN 12941 WITH DRAGER X-PLORE 300 HOODS, HELMETS AND VISORS. 

EN 12942 WITH DRAGER X-PLORE 4740/6000 HALF & FULL FACE MASK 

Robust designed for daily use in tough environments. Self-explanatory operation, minimise user error. Comfortable 

and easy to maintain. Intelligent alarm system with two-step alarm concept. Lithium-ion technology. Filter 

recognitions with advanced sensor technology 

Code: 431289 


Dräger X-plore ® 8700 Blower Unit 

CONFORMS TO EN 12941 WITH DRAGER X-PLORE 300 HOODS, HELMETS AND VISORS. 

EN 12942 WITH DRAGER X-PLORE 4740/6000 HALF & FULL FACE MASK 

Robust designed for daily use in tough environments. Self-explanatory 

operation, minimise user error. Comfortable and easy to maintain. 

Intelligent alarm system with two-step alarm concept. Lithium-ion 

technology. Filter recognitions with advanced sensor technology 

Code: 432824 


Standard Belt 

Dräger X-plore ® 8000 Standard Belt 

Provides secure fitting for the wearer when faced with the 

most challenging of environments 

Code: 431291 


Dräger X-plore ® 8000 Storage Box 

Provides robust protection for the main X-plore ® unit 

Code: 431324 


Dräger X-plore ® 8000 Carrying Systems, Batteries and Chargers 

DRÄGER X-PLORE ® 8000 ACCESSORIES 

Product Name Product Description Code 

X-plore ® 8000 Decon Belt R59710 - Adjustable between 750mm & 1,400mm 431292 

X-plore ® 8000 Comfort Pad R59730 - For prolonged use 431293 

X-plore ® 8000 Standard Charger R59580 - Provides rapid charging 431296 

X-plore ® 8000 High Capacity Battery R59585 - Provides twice the capacity of a standard battery 431295 

X-plore ® 8000 Standard Battery R59565 - Provides at least 4 hours of power 431294 

X-plore ® 8700 Standard Battery (EX) R59575 - Provides at least 4-8 hours of power 432825 

X-plore ® 8700 High capacity battery (EX) R59595 - Provides at least 8-16 hours of power 432826 

DRÄGER X-PLORE ® 8000 FILTERS 


P R S L 

6739535 - Reusable particulate, solid & liquid filter 431297 

A2 6739580 - Organic gases and vapours with boiling point >65°C 431298 

K2 6739585 - Ammonia and organic ammonia derivatives 431299 

A2 

P R S L 

6739545 - Organic gases and vapours with boiling point >65°C 431300 

A1 B1 E1 P R S L 

6739550 - Organic/inorganic acidic gases and vapours with boiling point >65°C 431301 

A1 B1 E1 K1 Hg PRSL 

6739555 - Organic/inorganic acidic gases + ammonia, 

mercury and vapours with boiling point >65°C 

431302 

118

Dräger Powered Respiratory System 



Welding Visor, ADF 5-13 

CONFORMS TO EN 175 B (VISOR) EN 

379 (ADF) 

Serves as both face piece and 

eye and face protector. The 

welding protection visor protects 

its wearer from sparks and 

splashes as well as from harmful 

light rays that occur during 

welding. A photocell detects 

the brightness and darkens the 

welding filters automatically from 

protection level 4 to protection 

level 5 to 9 respectively 9 to 13 

(adjustable). 


Standard Short Hood 

CONFORMS TO EN 12941 TH3 & EN 166 1 F3 

Integral part of the new powered airpurifying 

respirator. Robust, effective 

protection. Provides a high degree of 

comfort. Compatible with other products. 

Size (S/M, L/XL) 

Manufacturer’s code: R59800/10 

Code: 431309 


Premium Short Hood 


Increase chemical protection. Oil and 

water repellent. Premium sweatband. 

Cleaning and disinfection possible. Size 

(S/M, L/XL) 


Code: 431311 


Standard Long Hood 


Integral part of the new powered airpurifying 

respirator. Robust, effective 

protection. Provides a high degree of 

comfort. Compatible with other products. 

Complete protection for head, face and 

neck area. Size (S/M, L/XL) 


Code: 431313 


Code: 432811 

Dräger X-plore ® 8000 Premium 

Long Hood 

CONFORMS TO EN 12941 - TH3 & EN 166 1 F3 

Increased chemical protection. Oil and water resistant. 

Double seamed ends to avoid fraying. Reusable material. 

Panoramic view ensuring an almost natural field of 

vision. Complete protection for head, face 

and neck area. Size (S/M, L/XL) 

Code: 431315 Manufacturer’s code: R59860/70 

Dräger X-plore ® 8000 Protective Visor 

CONFORMS TO EN 12941 - TH2 EN 166 1 B 93 

Protective visor for the most challenging industrial job. 

Specially designed air channels leads the air directly 

into the breathing area. Prevents unpleasant drafts of 

air over the head. Durable and resistant PC visor. 

90 degree hinged visor 

Code: 431317 


Dräger X-plore ® 8000 Helmet with Visor 

CONFORMS TO EN 12941 - TH2 (RESPIRATORY PROTECTION), 

EN 397 (HEAD PROTECTION), EN 166 1 B 9 3 (EYE PROTECTION) 

Protective visor for the most challenging industrial job. 

Specially designed air channels leads the air directly 

into the breathing area. Prevents unpleasant drafts of 

air over the head. Durable and resistant PC visor. 

90 degree hinged visor 

Colour: White 

Code: 431319 

Colour: Black 

Code: 431318 



DRÄGER X-PLORE ® 8000 HOSES 

Product Name Application Code 

X-plore ® 8000 Standard Hose (For hoods) R59620 - For hoods 431305 

X-plore ® 8000 Flexible Hose (For Hoods) R59600 - For hoods 431306 

X-plore ® 8000 Flexible Hose (For tight fitting headpieces) R59610 - For tight fitting head pieces 431304 

X-plore ® 8000 Standard Hose (For helmets & visors) R59640 - For helmet & visors 431307 

X-plore ® 8000 Fleible Hose (For helmets and visors) R59650 - For helmets & visors 431308 

X-plore ® 8000 Standard Hose (For tight fitting headpieces) R59630 - For tight fitting head pieces 431303 

119


Escape Hoods 

Dräger Parat ® 5500 Fire Escape Hoods 

Dräger Parat ® 7500 

Combined Fire 

& Industrial Escape Hood 


Escape Hood - Single Pack 

CONFORMS TO EN 403:2004 FOR 

FIRE ESCAPE HOOD, ADDITIONALLY 

TESTED FOR THE USE AGAINST H2S (AT 

2,500PPM) IN ACCORDANCE WITH DIN 

58647-7 

Fire escape hood with CO P2 filter. 

Safe escape from suddenly occurring 

toxic fire related gases, vapours and 

particles. Compact, easy to handle 


Code: 431327 


Escape Hood - Soft Pack 

CONFORMS TO EN 403:2004 FOR 

FIRE ESCAPE HOODS, ADDITIONALLY 

TESTED FOR THE USE AGAINST H2S (AT 

2,500PPM) IN ACCORDANCE WITH DIN 

58647-7 

Fire escape hood with CO P2 filter. 

Safe escape from suddenly occurring 

toxic fire related gases, vapours and 

particles. Soft pack provides dust 

protection (IP5) 


Code: 431328 

Dräger Parat ® 5530 Escape 

Hood - Hard Pack 

R59435 - CONFORMS TO EN 403:2004 FOR 

FIRE ESCAPE HOODS, ADDITIONALLY TESTED 

FOR THE USE AGAINST H2S (AT 2,500PPM) IN 

ACCORDANCE WITH DIN 58647-7 

Fire escape hood with CO P2 filter. Safe 

escape from suddenly occurring toxic fire 

related gases, vapours and particles 


Code: 431329 

Dräger Wall holder for 

Parat ® Hard Pack 


Code: 431330 

Dräger Parat ® 7500 Fire & 

Industrial Escape Hood 

CONFORMS TO EN 403:2004 FOR FIRE 

ESCAPE HOODS; ACCORDING TO DIN 58645-7 

FROM FILTERING ESCAPE DEVICES; FILTER 

ADDITIONALLY TESTED IN ACCORDANCE 

WITH EN 14387:2004 FOR GAS FILTERS AND 

COMBINES FILTER 

Protects against toxic gases, vapours, 

particles and fire-related gases. Filter: 

ABEK CO P3. Fastest possible escape. 

Robust housing. 

Hard case for splash water 

protection (IP54) 


Code: 431326 

Soft case for dust protection (IP5) 


Code: 431334 

Dräger Parat ® 4700 Industrial Escape Hoods 


Hood - Soft Pack 

CONFORMS TO DIN 58647-7 FOR FILTERING 

ESCAPE DEVICES; FILTER ADDITIONALLY 

TESTED IN ACCORDANCE WITH EN 

14387:2004 FOR GAS FILTER(S) AND 

COMBINED FILTER(S). 

Industrial escape hood with ABEK P3 

filter. Industrial face hood for sudden use 

in Industrial gases, vapours and particles. 

Fast escape from hazards toxic gases, 

vapours and particles. Soft pack provides 

dust protection (IP5) 


Hood - Hard Pack 

CONFORMS TO DIN 58647-7 FOR FILTERING 

ESCAPE DEVICES; FILTER ADDITIONALLY 

TESTED IN ACCORDANCE WITH EN 

14387:2004 FOR GAS FILTER(S) AND 

COMBINED FILTER(S) 

Industrial escape hood with ABEK P3 

filter. Escape hood In robust hard case 

(provides dust protection to IPS). Allow 

the user to check the expiration date and 

the device condition. Hard pack provides 

splash water protection (IP54) 


Half Mask 

CONFORMS TO RECOGNIZED STANDARD FOR 

INDUSTRIAL ESCAPE DEVICES 

(DIN 58647-7) 

Provides users a minimum of 15 minutes 

escape time. Half mask escape device 

equipped with a multi-gas ABEK15 filter 


Mouth and Nose Clip 

CONFORMS TO RECOGNIZED STANDARD FOR 

INDUSTRIAL ESCAPE DEVICES 

(DIN 58647-7) 

Filter escape device are designed for 15 

minutes of escape time with ABEK filter 

robust handy case and robust clip. Safe 

escape from suddenly occurring toxic fire 

related gases, vapours and particles 


Code: 431335 


Code: 431336 


Code: 431331 


Code: 431332 

120

Face Fit Testing Kits 


3M Qualitative Face Fit Test Kit 

Each kit contains a hood and collar assembly, two nebulisers, one bottle of sensitivity 

solution, one bottle of fit test solution, detailed user instructions, spare atomiser heads 

for the nebuliser and a pin for unblocking nebulisers. 

Qualitative RPE Face Fit Test Kit for: 

• FFP1, FFP2, FFP3 filtering face pieces 

• Half facemask respirators fitted with particulate or combined filters 

• Sweet or Bitter Kits Available 

3M FT10 Face Fit Test Kit (Sweet) 

Code: 290128 

Manufacturer’s code: FT10 

3M FT30 Face Fit Test Kit (Bitter) 

Code: 290129 


3M FT11 Face Fit Test Kit 

Replacement Sweet Sensitivity 

Fit Test Solution 


Code: 290139 

Code: 290118 



3M FT32 Face Fit Test Kit 

Replacement Bitter 

Fit Test Solution 


Code: 290138 

Code: 290117 



121

Eye & Face Protection 

Buying Guide 

Choosing Safety Eyewear 

To help choose safety eyewear best suited to your needs the following information may be useful. 

Whilst every effort should be made to remove hazards as the result of a Workplace Risk Assessment, 

if safety eyewear is necessary as a last resort, the following section criteria should be considered: 

• Type of Hazard 

• Type of Protection 

• Type of Lens 

Anti-mist? Anti-scratch? 

Does your eyewear reach the standard? 

“K” and “N” are coating treatments that reach the standard set by EN 166. It’s easy how to find out, 

you just look for the “K” (anti-scratch) and “N” (anti-mist) on the lens of your safety glasses, goggles 

and face shields. 

By EN law all safety eyewear needs to be marked on the lens. If the lens doesn’t have ”K” or “N” 

marked on, then they do not reach the required standard. 

K = Anti-scratch treatment applied to the surface 

of the lens whose hardness is a barrier against 

superficial damages that can impair vision. 

Anti-Mist 

Many products in this section feature anti-mist 

coatings and are marked with this icon: 

N = Anti-mist treatment, which, due to its 

chemical and physical abilities, prevents the 

formation of condensation by absorbing the 

humidity drops. 

European Standards EN 166 

To assist you in your understanding of markings on Eye Protection Products covered by this Standard you should note: 

Optical Standard: Frame Lens 

Class 1: For continuous work - 1 

Class 2: For intermittent work - 2 

Class 3: For occasional work, but must not be worn continuously - 3 

Mechanical Properties: 

Increased Robustness (General Purpose) - S 

High Energy Impact (190m/sec) A A 

Medium Energy Impact (120m/sec) Grade 1 B B 

Low Energy Impact (45m/sec) Grade 2 F F 

Increased Robustness – General Purpose Impact-Performance at Extremes of Temperature T T 

Areas of Use: 

Liquids (chemical) 3 - 

Large Dust Particles 4 - 

Gas and Fine Dust Particles 5 - 

Short Circuit Electric Arc 8 - 

Molten Metals and Hot Solids 9 9 

Optional: 

Resistance to Misting/Fogging - N 

Resistance to Mechanical Damage (Anti-Scratch) - K 

NB: The “A”, “B”, “F” and “S” markings on frame and lens represent tests carried out on each component and 

therefore may be different – in which case the lower level must be assigned to the complete unit when making 

an assessment. 

EN 169 Welding Filters 

EN 170 Ultra-Violet Filters 

EN 171 Infra-red Filters 

EN 172 Solar Protection Filters for Industrial Use 

ANTI-MIST 

EN 175 Welding Work Equipment 

EN 207 Laser Protection Eyewear 

EN 208 Laser Adjustment Eyewear 

Anti-Scratch 

High impact but scratch resistant optically correct material based on polycarbonate with 

a quartz crystal coating on the front of the lens. This lens absorbs UVA and UVB light 

ANTI-SCRATCH up to a wavelength of 400 nanometres. Many products in this section have anti-scratch 

properties and are marked with this icon: 

Platinum Coating 

Platinum Coating on both sides of every lens that meets the highest available 

standard of EN166 K&N Anti-Scratch & Anti-Mist, and are marked with this icon: 


Type of Hazard 

Hazards fall into 4 main categories: 

1. Mechanical – Flying Debris, Dust or Molten Metal 

2. Chemical – Fumes, Gases or Liquid Splash 

3. Radiation – Heat (Infra-red), Ultraviolet light or Glare 

4. Laser Light – Over a wide spectrum of wavelengths from 

Ultraviolet to Infra-red 

Type of Eye Protection 

SAFETY SPECTACLES Comfortable and available in a variety 

of styles. Will not keep out Dust, Gas or Molten Metal. We also 

offer a complete prescription safety 

eyewear service. 

SAFETY GOGGLES Provide protection for all types of hazards. 

May be worn over spectacles. 

SAFETY FACESHIELD Protects the face as well as the eyes 

but does not keep out dust or gas. Comfortable to use for long 

periods. 

Clear lens 

General purpose for indoor applications that require 

impact protection. Provides 99% protection from harmful 

UV-B rays. 

Smoke 

Protection from sunlight, excessive glare and high levels 

of hazardous light, ideal for all outside workers. Full 

colour recognition. 

Indoor/Outdoor 

Reduces sun glare and intense sunlight, mirror coating 

reflects glare. Full colour recognition. 

Yellow 

Ideal for low-light environments, artificially lit areas, dawn 

and dusk. Provides high definition visibility and good 

contrast in low light. 

Platinum 

Bollé Safety revolutionized eye protection with an 

innovation that exceeds the requirements of all 

international standards, especially the En 166 KN option. 

It guarantees greater safety, reliability and comfort. This 

permanent coating on both slides of the lens gives a 

high resistance to scratching, to the most aggressive 

chemicals and delays the onset of fogging for well over 

2 minutes. 

CSP (Comfort Sensory Perception) 

Lens coating that provides 100% protection against UVA 

& UVB rays and blue light. This innovative coating is an 

effective solution for all activities that alternate exposures 

to bright light and low light. Suitable for extreme hot 

and cold temperature environments. CSP is also a 

combination of the platinum double sided anti-scratch 

and ant-mist fog coating. 

ESP (Extra Sensory Perception) 

ESP provides 100% protection against UVA & UVB rays, 

filtering filters out 70% of blue light. Transmits over 60% 

of visible light. 

Twilight 

Twilight offers the advantages of ESP but with a double 

anti-mist coating on both sides. This prevents fogging in 

the most challenging of conditions. Twilight are designed 

to be used in low light conditions, it improves contrast. 

It’s light transmission rate is perfect for indoors or 

outdoor. It filters 76% of blue light. 

122



123


Premium Eye Protection 

ANTI-MIST ANTI-SCRATCH 

CSP 

Smoke 

Blue Flash 

Bollé Tryon Safety Spectacles K & N Rated 

CONFORMS TO EN 166 AND EN 170 AND EN 172 1FT KN 

Attractive design wrap-around sporty style. Unique double sided 

anti-scratch and anti-mist Platinum ® K and N coating for excellent 

clarity and protection(except on flash lens). Greater comfort thanks 

to its adjustable non-slip nose. Excellent grip with co-injected 

PC/TPR temples. Soft and ultra pliable flex 160º temples for better 

wearer comfort. Half frame style offering a large field of view and 

better visibility. Lightweight, only 26g 

Colour: Clear lens Code: 292920 Manufacturer’s code: TRYOPSI 

Colour: Smoke lens Code: 292921 Manufacturer’s code: TRYOPSF 

Colour: CSP lens Code: 292927 Manufacturer’s code: TRYOCSP 

Colour: Blue Flash lens Code: 292922 

Manufacturer’s code: TRYOFLASH 

Bollé Rush+ Safety Spectacles K & N Rated 


Co-injected, bi-colour temples that are cushioning and fit perfectly to the 

head. Non-slip bridge. Unique double sided anti-scratch and anti-mist 

Platinum ® K and N coating for excellent clarity and protection. 26g. 

With built-in foam and strap version 

ANTI-MIST 

ANTI-SCRATCH 

Colour: Clear lens Code: 293026 Manufacturer’s code: RUSHPPSI 

Colour: Smoke lens Code: 293027 Manufacturer’s code: RUSHPPSF 

Colour: Twilight lens Code: 431357 Manufacturer’s code: RUSHPTWI 

Colour: CSP lens Code: 014421 Manufacturer’s code: RUSHPCSP 

Twilight 

CSP 

Smoke 

Bollé Slam+ Safety Spectacles K & N Rated 


Ultra modern, ultra lightweight, sports style wrap. 

Ultra close fitting protection. Panoramic vision. Co-injected sports temples. 

Unique double sided anti-scratch and anti-mist Platinum ® K and N coating 

for excellent clarity and protection. 27g 

ANTI-MIST 

ANTI-SCRATCH 

Colour: Clear lens Code: 431359 Manufacturer’s code: SLAPPSI 

Colour: Smoke lens Code: 431360 Manufacturer’s code: SLAPPSF 

Smoke 

Colour: CSP lens Code: 431361 Manufacturer’s code: SLAPCSP 

CSP 

ANTI-MIST 

ANTI-SCRATCH 

Bollé Silium+ Safety Spectacles K & N Rated 


Silium+ combines the styling and success of the Silium with a comfortable and ultra 

lightweight polycarbonate frame. Adjustable non-slip bridge. Great all-round vision. 

Unique double sided anti-scratch and anti-mist Platinum ® K and N coating 

for excellent clarity and protection. Gun Metal temples. Weight 21g 

Smoke 

Colour: Clear lens Code: 292911 Manufacturer’s code: SILPPSI.85 

Colour: Smoke lens Code: 292912 Manufacturer’s code: SILPPSF49 

CSP 

Colour: CSP lens Code: 292913 Manufacturer’s code: SILPCSP.49 

Bollé IRI-s Safety Spectacles K & N Rated 

ANTI-MIST 


B-Flex shape memory bridge. Bridge is height adjustable. 

Pivoting non-slip ergonomic temples. Optical class 1 polycarbonate 

lenses. IRI-s is also available with corrective reading lenses. 

Supplied with sports cord. Unique double sided anti-scratch and anti-mist 

Platinum ® K and N coating for excellent clarity and protection. 28g. 

Other dioptres available 2.0, 2.5 and 3.00 

ANTI-SCRATCH 

Smoke 

Twilight 

Colour: Clear lens Code: 293121 Manufacturer’s code: IRIPSI 

Colour: Smoke lens Code: 293122 Manufacturer’s code: IRIPSF 

Colour: Twlight lens Code: 293123 Manufacturer’s code: IRITWI 

Colour: Clear. Black/red frame. 1.5 Reading Area +1.5 ASAF IRIDPS Code: 293124 

Manufacturer’s code: IRIDPSII.5 

124


Bollé Rush+ Small Safety Spectacles K & N Rated 


Suitable for narrower faces. Bi-material, bi-colour temples pink/white or blue/ 

white. Unique double sided anti-scratch and anti-fog Platinum ® K and N coating for 

excellent clarity and protection. Adjustable non-slip bridge. Other colours available: 

RUSHPSCSPL CSP Grey/Yellow Temples: RUSHSPSFG Smoke Grey/Green Temples: 

RUSHSPSFL Smoke Grey/Yellow Temples: RUSHSPSIS Clear Grey/Coral Temples. 26g 

Colour: Clear lens. Blue/White frame 

Code: 431286 Manufacturer’s code: RUSHPSPSI 

ANTI-MIST 

ANTI-SCRATCH 


Bollé Tracker II Hybrid Safety Spectacle K & N Rated 

CONFORMS TO EN 166 EN 170 AND EN 172 1BT 34 KN 

WHEN WORN WITH THE HEADBAND PROVIDED/WITHOUT HEADBAND EN 166 1F KN 

Provides the comfort of a spectacle with the fit and seal of a goggle. 

Interchangeable foam seal which gives added brow and cheek protection. 

Adjustable strap that can also be removed. Straight sports temples. Wraparound 

base 8 curve. Fantastic field of view and side ventilation. Prescription 

insert available which can be glazed to all prescriptions. Supplied with a 

micro fibre pouch. Unique double sided anti-scratch and anti-fog Platinum ® 

K and N coating for excellent clarity and protection. 52g. 

Colour: Clear lens Code: 292934 Manufacturer’s code: TRACPSI 

ANTI-MIST 

ANTI-SCRATCH 

Colour: Smoke lens Code: 430686 Manufacturer’s code: TRACPSF 

Smoke 

Also available in Yellow 

uvex skyguard NT Safety Spectacles K & N Rated 

CONFORMS TO EN166 1F 34 KN CE 

Soft sealing frame adapts to the wearers face and protects against liquid droplets, splashes 

and large dust particles for increased protection. uvex permanent lens coating technology: 

anti-fog coating on the inside of the lens, scratch-resistant on the outside. Lens can be tilted 

for a customised fit. Close fitting, low profile dimensions. Less obtrusive allowing for increased 

flexibility of movement. Wraparound design for an unhindered field of vision. 100% UV protection 

Colour: Clear Code: 293264 Manufacturer’s code: 9175-275 

ANTI-MIST 

ANTI-SCRATCH 

NEW 

uvex i-5 Safety Spectacles K & N Rated 

CONFORMS TO EN166 1FT KN CE 

Soft, flexible nose pad for maximum wearer comfort and a non-slip fit. x-tended 

eyeshield provides protection against dust, dirt and flying particles. x-tended 

sideshield provides further protection without restricting peripheral vision. 

3-position inclination allows wearers to achieve a comfortable fit. Extendable 

x-twist side arm technology offers flexible, convenient adjustment to any head 

shape. Soft ear-pieces for a pressure-free, non-slip fit 

Clear 

Colour: Clear lens Manufacturer’s code: 9183265 

Code: 9183265 

Grey Sunglare 

ANTI-MIST 

ANTI-SCRATCH 

Colour: Grey Sunglare Manufacturer’s code: 9183281 

Code: 9183281 

Smoke 

Amber 

3M SecureFit 200 Series Safety Spectacles 

CONFORMS TO EN166 1.FT AND EN170 

Featuring innovative 3M Pressure Diffusion Temple Technology - superior 

comfort, security fit. The temples self adjust to fit a wide array of head shapes 

and sizes. Reduces slippage during workplace head movement. One of the 

lightest on the market - only 18g. Ideal for use in a wide range of industries 

Colour: Clear lens Code: 293148 Manufacturer’s code: SF201AF 

Colour: Smoke lens Code: 292071 Manufacturer’s code: SF202AF 

Colour: Amber lens Code: 292072 Manufacturer’s code: SF203AF 

3M SecureFit 400 Series Safety Spectacles 

CONFORMS TO EN166 1 F 

Secure and comfortable fit delivered from 3M Pressure Diffusion Temple 

Technology which helps diffuse pressure over the ear. Increased comfort and 

improved grip provided by adjustable nose pads and soft-touch temple inlays. 

Lightweight and stylish design. 19g. Protection against high speed particles 

at low energy (F) at extreme temperature conditions, -5C and+55C, (T) in 

accordance with EN166:2001 

Colour: Clear lens Code: 293149 Manufacturer’s code: SF401AF 

125



NEW 

Clear 

Bollé SILEX+ Safety Spectacles K & N Rated 

CSP 

CONFORMS TO EN 166/170/172 1FT KN CE 

Flex 160° Technology. Fits all face sizes and shapes. Co-injected bi-material 

sports temples. Platinum double sided anti-scratch and anti-fog lens coating. 

Optical class 1 polycarbonate lens. 30g. Retainer Strap available 

Colour: Clear Lens Code: 292910 Manufacturer’s code: SILEXPPSI 

Colour: CSP Lens Code: 292943 Manufacturer’s code: SILEXPCSP 

Colour: Smoke Lens Code: 292940 Manufacturer’s code: SILEXPPSF 

Smoke 

ANTI-MIST 

ANTI-SCRATCH 

ANTI-MIST 

ANTI-SCRATCH 

Bollé Ultim8 Clear Lens Safety Google K & N Rated 

CONFORMS TO EN 166 AND EN 170 AND EN 172 1BT KN 

High resistance product. 2 in 1 product: spectacle or goggle thanks to temples/ 

goggles conversion kit. Attractive design wrap-around sporty style. Excellent for 

extreme work environments (cold, heat, dust, damp environments, oil industry, 

mining industry, etc.) thanks to its TPR waterproof foam and its maximum mist 

resistance withcoating on both sides of the lens. Excellent grip with pivoting 

co-injected PC/TPR temple and removable adjustable strap. Unique double sided 

anti-scratch and anti-mist Platinum ® K and N coating for excellent clarity and 

protection. 64g. Colour: Clear lens 

Code: 432306 

Manufacturer’s code: ULTIPSI 

Bollé Cobra Safety Spectacles 

K & N Rated 

CONFORMS TO EN 166 AND EN170 AND EN 172 1FT KN 

Ultimate wrap around comfort. Co-injected non-slip pivoting sports temples. 

Non slip bridge. 180° panoramic field of view. Unique double sided anti-scratch and 

anti-fog Platinum ® K and N coating for excellent clarity and protection. Optical class 1 

polycarbonate lens. Supplied with a free sports cord. 28g. Kit version available 

Colour: Clear lens, Black temples Code: 292953 Manufacturer’s code: COBPSI 

Colour: Smoke lens, Black temples Code: 292954 Manufacturer’s code: COBPSF 

Colour: Yellow lens, Black temples Code: 292974 Manufacturer’s code: COBPSJ 

Colour: Clear lens, Black temples Code: 292975 Manufacturer’s code: COHDPI 

CSP also available 

ANTI-MIST 

ANTI-SCRATCH 

Smoke Yellow HD 

Bollé Contour Safety 

Spectacles K & N Rated 

CSP 


Incredibly lightweight (21g) with TPE bridge and temples. Market leading levels of fit, 

comfort and protection integrated side shields with exceptional field of view over 180°. 

Supplied with a free microfibre bag. Unique double sided anti-scratch and 

anti-mist Platinum ® K and N coating (not ESP version) for excellent clarity and 

protection. Available in polarised version 

Colour: Clear lens Code: 292915 Manufacturer’s code: CONTPSI 

Colour: Smoke lens Code: 292916 Manufacturer’s code: CONTPSF 

ESP 

Colour: ESP lens Code: 292917 Manufacturer’s code: CONTESP 

ANTI-MIST 

ANTI-SCRATCH 

Smoke 

Colour: CSP lens Code: 292903 Manufacturer’s code: CONTCSP 

126

Modern Safety Spectacles 

CBR65Contrast enhancement 

CBR65 

uvex pheos cx2 



• Innovative uvex X-tended injection moulded 

component around brow, nose and side 

arms offers additional protection and 

Ideal for all indoor and 

outdoor applications 

Soft internal surface 



Robust outside 



uvex sportstyle 

Innovative lens 

geometry 



glasses 

• Sporty, light weight design with contoured 

lens 

• Super soft adjustable nose bridge for a 

Reduces Blue Light by 50% 

Relaxed comfortable vision 

65% transmission 

NEW 

Contrast enhancement 

Reduces Contrast enhancement 

Blue Light by 50% 

Relaxed Reduces comfortable Blue Light by vision 50% 

65% Relaxed transmission comfortable vision 

65% transmission 

uvex super f OTG 

Soft, flexible 

side arms for 

increased 

Innovative lens comfort 

geometry Fits over most 

Innovative prescription lens glasses 

geometry 

NEW 

• Overspecs for wearers of prescription 

• uvex permanent anti-fog coating on the 

uvex super OTG 

uvex super f OTG 

Soft, flexible 

side arms for 

increased Soft, flexible 

comfort side arms for 

increased 

Fits over comfort most 

prescription glasses 

Fits over most 

prescription glasses 

• Innovative uvex X-tended injection moulded • Sporty, light weight design with contoured • Overspecs for wearers of prescription 

comfort 

secure stable fit 

inside of the lens, scratch resistant on 

component • X-twist technology around of the side brow, arms nose gives and • uvex side duo component lens technology combines the outside 

• Innovative uvex X-tended injection moulded • Sporty, light weight design with contoured • 

glasses 

Overspecs for wearers of prescription 

a light spring effect for no pressure grip hard and soft materials delivering protection • Unique hard to soft side arms mould 

arms 

component 

offers additional protection Super soft adjustable nose bridge for a 

uvex permanent anti-fog coating on the 

• uvex permanent around anti-fog coating brow, on nose the and side comfort lens 

perfectly to the wearer for an ultra soft glasses 

comfort inside the lens, scratch resistant on • Permanent anti-fog secure coating on the stable inside of fit low pressure fit 

arms offers additional protection and • Super soft adjustable nose bridge for a • 

inside 

uvex permanent 

of the lens, 

anti-fog 

scratch 

coating 

resistant 

on the 

on 

• X-twist 

the outside 

technology of the side arms 

the 

gives 

lens, scratch resistant 

uvex duo 

on the 

component 

outside • Well 

technology 

suited in combination 

combines 

with dust masks 

comfort 

the outside 

• Conforms to EN166 1FT KN CE and EN172 • Conforms to EN166 secure 1FT KN CE stable and EN172 fit • Conforms to EN166 1FT KN CE and EN172inside of the lens, scratch resistant on 

• 

a 

X-twist 

light spring 

technology 

effect 

of 

for 

the 

no 

side 

pressure 

arms gives 

grip 

• 

hard 

uvex 

and 

duo 

soft 

component 

materials 

technology 

delivering protection 

combines 

• Unique 

the outside 

hard to soft side arms mould 

uvex 

a 

permanent anti-fog coating on the and comfort 

perfectly to the wearer for an ultra soft 

Product light spring Code: effect 9198.064 for no pressure Product gripCode: 9193.064 hard and soft materials Product delivering Code: 9169.164 protection • Unique hard to soft side arms mould 

• 

inside 

uvex permanent 

of the lens, 

anti-fog 

scratch 

coating 

resistant 

on the 

on • Permanent 

and comfort 

anti-fog coating on the inside of low 

perfectly 

pressure 

to the 

fit 

wearer for an ultra soft 

the 

inside 

outside 

of the lens, scratch resistant on • 

the 

Permanent 

lens, scratch 

anti-fog 

resistant 

coating on 

on 

the 

the 

inside 

outside 

of 

• Well 

low pressure 

suited in combination 

fit 

with dust masks 

• Conforms 

the outside 

to EN166 1FT KN CE and EN172 

Conforms 

the lens, scratch 

to EN166 

resistant 

1FT KN 

on 

CE 

the 

and 

outside 

EN172 

• Conforms 

Well suited 

to 

in 

EN166 

combination 

1FT KN 

with 

CE 

dust 

and 

masks 

EN172 

Code: • Conforms 256414 to EN166 1FT KN CE and EN172 • Code: Conforms 014480 to EN166 1FT KN CE and EN172 • Code: Conforms 014483 to EN166 1FT KN CE and EN172 

Product Code: 9198.064 

Product Code: 9193.064 Product Code: 9169.164 

Product Code: 9198.064 

Product Code: 9193.064 Product Code: 9169.164 

CBR65_advert_greenhams.indd 1 07/06/2019 16:53:52 

NEW 


uvex pheos cx2 Safety Spectacles K & N Rated 

ANTI-MIST 

CONFORMS TO EN 166 1 FT KN CE 

ANTI-SCRATCH 

Innovative injection moulding around brow, nose and side arms adapt 

CBR65_advert_greenhams.indd 

to the wearers face 

1for the ultimate fit providing protection and comfort. 

07/06/2019 16:53:52 

CBR65_advert_greenhams.indd Permanent anti-fog 1coating on the inside of the lens, scratch-resistant 

07/06/2019 16:53:52 

Grey 

outside. 100% UV protection 

Colour: Clear lens Code: 256412 Manufacturer’s code: 9198.257 

EN 166 1FT KN CE, EN172 

Colour: Grey lens Code: 256413 Manufacturer’s code: 9198.237 

Grey 

uvex sportstyle Safety Spectacles K & N Rated 

CONFORMS TO EN 166 1FT KN CE 

Close fitting, athletic design. Low weight - just 23g for incredible comfort. Contoured 

lens fits all facial shapes. Soft grip side arms, nose bridge and brow for non-slip 

comfort. uvex permanent lens coating technology: anti-fog coating on the inside and 

scratch-resistant on the outside. 100% UV protection 

Colour: Clear lens Code: 431414 Manufacturer’s code: 919.376 

ANTI-MIST 

CONFORMS TO EN 166 1FT KN CE, EN 172 

Colour: Grey Sunglare lens Code: 431415 Manufacturer’s code: 919.277 

ANTI-SCRATCH 

uvex pheos Safety Spectacles K & N Rated 

ANTI-MIST 

CONFORMS TO EN 166 1F KN CE 

Available in two sizes, the small version is 8mm narrower than the standard version – ideal for smaller faces. uvex permanent lens coating technology: anti-fog coating on the 

inside and scratch-resistant on the outside. Low profile side arms enhances compatibility with other items of PPE 

Colour: Clear lens. Green/Black frame 

Code: 256432 Manufacturer’s code: 9192.225 Standard 

Code: 431410 Manufacturer’s code: 9192.720 Small 

Colour: Amber lens. Yellow/Black frame 



CONFORMS TO EN 166 1F KN CE, EN 172 

Colour: Grey Sunglare lens. Grey/Black frame 




Colour: Silver Mirror Lens. Black frame 



ANTI-SCRATCH 

Amber Grey Sunglare Silver Mirror 

127



Bollé All Inclusive Prescription Pack 

Code: 293063 

ANTI-MIST 

ANTI-SCRATCH 

Bollé Silium Metal Frame 

Safety Spectacles 

Smoke 

CONFORMS TO EN 166 AND EN 170 AND EN 172 1FT 

Optimal protection and panoramic vision. Anti-scratch and anti-mist. Optical class 1 

polycarbonate lens. Integrated side shields. 160° flex sports temples with spring joints. 

Soft adjustable non-slip nose pads. Tip Grip system for improved fit. 34g 

Colour: Clear lens, Silver frame Code: 292908 Manufacturer’s code: SILPSI 

Colour: Smoke lens, Silver frame Code: 292909 Manufacturer’s code: SILPSF 

KeepSAFE XT 5X8 Safety Spectacles K & N Rated 

CONFORMS TO EN 166 1.FT.KN 

The design and the technical solutions adopted enable the 5X8 to conform 

perfectly to any face. Carefully calibrated geometry and selected materials provide 

strength and robustness for a feeling of absolute safety. Over-moulded nose pad for 

comfort without pressure 

Colour: Clear anti-scratch/anti-mist lens Code: 293194 

Colour: Solar (The Natural Vision Solar) anti-scratch/anti-mist lens Code: 293195 

Colour: Yellow (The Enhanced Contrast) anti-scratch/anti-mist lens Code: 293196 

KeepSAFE XT 5X3 Safety Spectacles K & N Rated 

CONFORMS TO EN 166 1.FT.KN 

VANGUARD UDC: ANTI-SCRATCH & ANTI-MIST LENS 

Lens with FLD (Floating Lens Design) technology. Frame engineered to cushion contact 

points on the face. Extended 9 base wrap-around lens, provides extra coverage around 

the eyes. Ventilation system. Fits to face without adjustments 

Colour: Clear anti-scratch/anti-mist lens Code: 293191 

Colour: Smoke anti-scratch/anti-mist lens Code: 293192 

128 

KeepSAFE 506UP Safety Spectacles 

K & N Rated 

CONFORMS TO EN166 1.FT.KN 

Full colour technology with permanent anti-scratch and 

anti-fog abilities. Ensures you see things clearly and 

in natural colours, even with a smoke finish. Features 

a wraparound lens that offers panoramic vision for all 

work environments. Temple arms that adjust in length 

and inclination allow each user to find the perfect fit 

and maximise protection. The rubberised tips of the 

temple arms and the adjustable nose pad all add up to 

an ability to maximise comfort for the user and ensure 

perfect all-day wear 

Colour: Clear anti-scratch/anti-mist lens 

Code: 293549 

Colour: Smoke 

Code: 293546 

Smoke


NEW 

Bollé ILUKA Safety Spectacles 

CONFORMS TO EN 166/170/172 1FT CE 

Lightweight and ultra-enveloping. Thin ergonomic co-injected temples. 

Double sided anti-scratch and anti-fog lens coating. 

Optical class 1 polycarbonate lens. Ideal for smaller faces. 22g 

ANTI-MIST 

Colour: Clear lens Code: ILUPSI Manufacturer’s code: ILUPSI 

ANTI-SCRATCH 

Colour: Smoke lens Code: ILUPSF Manufacturer’s code: ILUPSF 


ANTI-MIST 

ANTI-SCRATCH 

Bollé Rush Safety Spectacles 


Close fitting base 9 wrap design. Non-slip and adjustable bridge and temples. 

Lightweight – 25g. Optical class 1 polycarbonate lenses in a variety of lens options. 

Panoramic field of view. Supplied with sports cord. Comfort Foam Kit available 

Colour: Clear lens, Clear temples Code: 293022 Manufacturer’s code: RUSHPSI 

Colour: Twilight lens, Twilight temples Code: 293024 

Manufacturer’s code: RUSHTWI 

Colour: Smoke lens, Smoked temples Code: 293023 

Manufacturer’s code: RUSHPSF 

Twilight 

Smoke 

HD 

Colour: HD lens, Clear temples Code: 293009 Manufacturer’s code: RUSHDPI 

ANTI-MIST 

ANTI-SCRATCH 

Bollé Prism Safety Spectacles 


Sport design. Comfortable straight temples. Anti-scratch/anti-mist lens. 

Supplied with sports cord. 23g. Food industry. No metal parts 

Colour: Clear lens, Black temples Code: 431284 Manufacturer’s code: PRIPSI 

Colour: Smoke, Black temples Code: 431285 Manufacturer’s code: PRIPSF 

Smoke 

ANTI-MIST 

ANTI-SCRATCH 

Smoke 

Yellow 

Bollé Viper Safety Spectacles 


Ultra modern, ultra lightweight, sports style wrap. Close fitting protection. Panoramic vision. 

Adjustable temples. Integrated side shields. Anti-scratch/anti-mist lens. Neck cord. 28g 

Colour: Clear lens, Blue/Black temples Code: 292963 Manufacturer’s code: VIPCI 

Colour: Smoke lens, Black temples Code: 292956 Manufacturer’s code: VIPCF 

Colour: Yellow lens, Black temples Code: 292973 Manufacturer’s code: VIPPSJ 

3M Solus 1000 Series Spectacle Kit Scotchgard 

CONFORMS TO EN166 K & N 

Stylish, lightweight spectacles offering great fit and comfort. Features superior 

3M Scotchgard . Anti-mist coating for reliable protection; outperforms the 

requirements of the EN166 N marking by 5x*. Economical: Longer lasting 

coating withstands at least 25 washes. Removable padded temples and a soft 

nose bridge for added comfort. Kit contains optional elastic strap and vented 

foam gasket for reduced exposure 

• Colour: Clear anti-scratch/anti-mist K & N rated lens 


ANTI-MIST 

ANTI-SCRATCH 

uvex i-works Safety Spectacle K & N Rated 


Sporty robust design. Panoramic lens. Permanent lens coating technology permanent anti-fog on the inside 

of the lens, scratch-resistant outside. Soft grip, low profile side arms with practical hang cord attachment option. 

Offers high levels of compatibility with other PPE. Metal free provides reduced weight for high levels of comfort 

Colour: Clear/UV 2-1,2, lens. Anthracite/Blue frame Code: 014475 Manufacturer’s code: 9194.171 

Colour: Clear /UV 2-1,2, lens. Anthracite/Lime frame Code: 431519 Manufacturer’s code: 9194.175 

Colour: Grey sunglare 23% / UV - 2,5, lens. Anthracite/Grey frame Code: 014477 Manufacturer’s code: 9194.270 

Colour: Amber/UV - 2-1,2, lens. Black/Yellow frame Code: 014476 Manufacturer’s code: 9194.365 

Colour: Clear Sunglare filter / UV 5-1,7 silver mirror lens. Anthracite/Grey frame Code: 431522 Manufacturer’s code: 9194.885 

ANTI-MIST 

ANTI-SCRATCH 

129


Bollé MERCURO Safety Spectacles 

Bollé MERCURO Safety Spectacles 

CONFORMS TO EN166/170/172 1FT KN CE 

Stylish safety sunglasses. Bi-material TPR sports temples. Non-slip bridge 

and non-slip temples. Platinum double sided anti-scratch and anti-fog. 

Close fitting. Excellent wide field of view. Optical class 1 polycarbonate 

lenses. Supplied with free micro fibre pouch. 25g. Food industry. No metal 

parts. Retainer Strap available 

Colour: CSP lens Code: 292951 Manufacturer’s code: MERCSP 

Colour: Smoke lens Code: 292901 Manufacturer’s code: MERPSF 

ANTI-MIST 

ANTI-SCRATCH 

130


Smoke 

ESP 

Bollé Contour Metal Frame Safety Spectacles 


It’s wrap-around design combined with the strength of metal guarantees optimum 

comfort. Increased upper protection with comfort foam Adjustable non-slip bridge. 

Flex 160 degrees temples to adapt to all heads and reduce pressure points. 

Free Microfibre Pouch. 38g 

Colour: Clear lens, Gun metal frame Code: 292931 Manufacturer’s code: CONTMPSI 

Colour: Smoke lens, Gun metal frame Code: 292933 

Manufacturer’s code: CONTMPSF 

Colour: ESP lens, Gun metal frame Code: 292932 Manufacturer’s code: CONTMESP 


conseil 

ANTI-MIST 

ANTI-SCRATCH 

ANTI-MIST 

ANTI-SCRATCH 

Code: 293028 

Code: 292944 

Weight: 30g 

Code: 293013 

CONFORMS TO EN 166 1FT ANTI-MIST ANTI-SCRATCH 

Smoke 

Bollé Axis Safety Spectacles 


Wrap-around protection. Integrated side shields. Panoramic optical class 1 polycarbonate 

lens. Unique soft adjustable non slip nose pads. Co-injected Tip Grip pivoting temples for 

improved fit and comfort. Clear and Smoke versions anti-mist and anti-scratch, Contrast 

version anti-scratch 

Colour: Clear lens, Grey temples Code: 292924 Manufacturer’s code: AXPSI 

Colour: Smoke lens, Grey temples Code: 430685 Manufacturer’s code: AXPSF 

Colour: Contrast lens, Grey temples Code: 292929 

Manufacturer’s code: AXCONT 

Contrast 

ANTI-MIST 

ANTI-SCRATCH 

Bollé Slam Safety Spectacles 


Ultra modern, ultra lightweight, sports style wrap. Close fitting protection. 

Panoramic vision. Sports temples. Integrated side shields. Neck cord. 23g. 

Anti-mist and anti-scratch. Welding versions available 

Colour: Clear lens, Black temples Code: 293018 Manufacturer’s code: SLAPSI 

Colour: Smoke lens, Black temples Code: 293020 Manufacturer’s code: SLAPSF 

Colour: Yellow lens, Black temples Code: 293017 Manufacturer’s code: SLAPSJ 

Colour: ESP lens, Black temples Code: 293019 Manufacturer’s code: SLAPSP 

Smoke ESP Yellow 

ANTI-MIST 

ANTI-SCRATCH 

Bollé Mamba Safety Spectacles 


Lightweight, close fitting wrap with co-injected sports temples, non-slip bridge. 

9 dioptre base curve – fantastic field of view. Excellent comfort and fit. Neck cord. 

25g. Anti-mist and anti-scratch 

Colour: Clear lens, Black/Grey temples 

Code: 292919 Manufacturer’s code: MAMPSI 

Colour: Yellow lens, Translucent temples 

Code: 431524 Manufacturer’s code: MAMPSJ 

Yellow 

Smoke 

ANTI-MIST 

ANTI-SCRATCH 

Colour: Smoke lens, Black/Grey temples 

Code: 292907 Manufacturer’s code: MAMPSF 

131



NEW 

Bollé BL30 Safety Spectacles 

CONFORMS TO EN 166/170/172 1F CE 

Cost effective. Double sided anti-scratch and anti-fog. 

Close fitting. Lightweight (31g) wrap. 

Optical class 1 polycarbonate lens. 

Anti-mist and anti-scratch. 

No metal parts. Food industry 

Colour: Clear lens, Clear temples 

Manufacturer’s code: PSSBL30-014 

Code: 292945 

ANTI-MIST 

ANTI-SCRATCH 

Colour: Smoke lens, Smoked temples 

Manufacturer’s code: PSSBL30-408 

Code: 292951 

Smoke 

ANTI-MIST 

ANTI-SCRATCH 

Smoke 

Bollé Bandido Safety Spectacles 


Lightweight. Sports style wrap. Excellent panoramic field of view. Optical class 1 

polycarbonate lens. Integrated side shields. Supplied with a sports neck cord. 28g. 

Anti-mist and anti-scratch. Welding Shade 5 version available 

Colour: Clear lens, Clear temples Code: 293503 Manufacturer’s code: BANCI 

Colour: Smoke lens, Smoked temples Code: 293506 Manufacturer’s code: BANPSF 

Bollé B-line BL10 Safety Spectacles 


Optical class 1 anti-scratch polycarbonate lens and temples. 

Supplied with a free sports cord. Lightweight 

Colour: Clear anti-scratch lens 

Code: 293519 

Colour: Smoke anti-scratch lens 

Code: 430684 

Manufacturer’s code: BL1OCI 

Manufacturer’s code: BL1OCF 

ANTI-SCRATCH 

KeepSAFE Phantom Safety Spectacles 

CONFORMS TO EN 166 1.F 

One piece, frameless polycarbonate lens. Lightweight. 

Anti-scratch. Comfortable nose bridge. Adjustable side arms 

ANTI-SCRATCH 

Colour: Clear, Black frame Code: 293150 

KeepSAFE Jaguar 8000 Safety Spectacles 

CONFORMS TO EN166 1.F 

Colourful temples in non-allergenic rubber. 

Non-slip rubber nose pad. 

Eyebrow protection 

ANTI-SCRATCH 

Colour: Clear anti-scratch lens 

Code: 293547 

132 

Colour: Smoke anti-scratch lens, UV400 Code: 293548 

Smoke


GREAT VALUE 

KeepSAFE Jaguar Safety Spectacles 


Modern, lightweight style. 

Scratch-resistant polycarbonate lens 

Colour: Clear lens, Translucent sidearms 

Code: 293221 

Colour: Smoke lens, Black translucent sidearms 

Code: 292980 

Colour: Yellow lens, Yellow translucent sidearms 

Code: 293224 

ANTI-MIST ANTI-SCRATCH 

Smoke 

Yellow 


GREAT VALUE 

Pyramex Intruder Safety Spectacles 

CONFORMS TO CE EN166 F 

Lightweight, frameless protection. 

Coated lens provides excellent 

side protection and 99.9% protection against harmful UV rays 

Colour: Clear lens Code: 431997 Manufacturer’s code: ES4110S 

Colour: Grey lens Code: 431998 Manufacturer’s code: ES4120S 

Indoor/Outdoor 

Mirror 

Grey 

Pyramex Neshoba Clear Lens Safety Spectacles 

CONFORMS TO CE EN166 F 

Frameless design with thin flexible temples. Ultra lightweight, only 16 gm. 

Provides 99% protection from harmful UV rays 

Colour: Clear lens Code: 432046 Manufacturer’s code: ES9710S 

Colour: Grey lens Code: 432047 Manufacturer’s code: ES9720S 

Colour: Indoor/Outdoor Mirror lens Code: 432048 Manufacturer’s code: ES9780S 

GREAT VALUE 

ANTI-SCRATCH 

KeepSAFE Spitfire 2 

Safety Spectacles 

CONFORMS TO EN 166 1.F AND EN 170 

Anti-scratch and protection against UV400 lens. Extremely light and encircling. 

Elastic structure, extremely flexible and resistant. New temple for a better 

ergonomic fit. Soft adjustable nose pad. Neck cord included in the packaging 

Colour: Clear anti-scratch lens Code: 293166 

CONFORMS TO EN 166 1.F AND EN 172 

Colour: Smoked anti-scratch lens Code: 293167 

KeepSAFE Pro 553 Zero Noise Safety Spectacles K Rated 

CONFORMS TO EN166 1.FT.K 

Patented, flexible, shaped temples. 

• Wrap-around model, guarantees optimal lateral protection 

• Light and handy, made entirely in polycarbonate, weight only 19g 

• Temples with reduced section, designed for a perfect interaction with ear muffs 

Colour: Clear anti-scratch lens Code: 293203 

Colour: Smoke (The Natural Vision Solar) anti-scratch lens Code: 293204 

133


Traditional & Over Spectacles 

Bollé Tryon OTG Safety Over Spectacles 


Attractive design wrap-around sporty style. Unique double sided anti-scratch and 

anti-fog Platinum ® K and N coating for excellent clarity and protection(except on flash 

lens). Excellent grip with co-injected PC/TPR temples. Soft and ultra pliable flex 160º 

temples for better wearer comfort. Half frame style offering a large field of view and 

better visibility. Lightweight, only 40g 

Colour: Clear lens 

Code: 432307 Manufacturer’s code: TRYOTGPSI 

Colour: Smoke lens 

Code: 432308 Manufacturer’s code: TRYOTGPSF 

ANTI-MIST 

ANTI-SCRATCH 

Bollé Overlight 

CONFORMS TO EN 166 AND EN 170 1FT 

OTG (over the glasses). Fits over all standard prescription frames. 

Compact and lightweight. Ideal fpr food industry. No metal parts. 

Optical class 1 polycarbonate lens. Anti-scratch and anti-mist. 33g 

Colour: Clear lens. Clear wrap-around frame 

Code: 292925 Manufacturer’s code: OVLITPSI 

ANTI-MIST 

ANTI-SCRATCH 

GREAT VALUE 

KeepSAFE Hurricane Safety Spectacles 

CONFORMS TO EN 166.1.FT 

Economical single polycarbonate wrap-around lens. Moulded browguard. 

Vented side shields 

Colour: Clear lens, Clear frame 

Code: 293144 

KeepSAFE Lightning Safety Spectacles 


Wide vision, lightweight wrap-around. Scratch-resistant polycarbonate lens. 

Built-in browguard adjustable sidearms 

Colour: Clear lens, Blue frame 

Code: 293158 Each £3.85 

ANTI-SCRATCH 

KeepSAFE Concorde Safety Spectacles 


Ultra lightweight, with adjustable length sidearms. 

Polycarbonate single lens construction. Built-in browguard 

Colour: Clear lens, Blue sidearms 

Code: 293146 Each £2.52 

ANTI-SCRATCH 

134

Traditional & Over Spectacles 

NEW 

Pyramex Cappture Safety Spectacles 


A general purpose safety overspec for applications that require impact protection. 

Dielectric. Fit over your prescription frames. 100% UVA/UVB protection. Temples 

extend from brow bar to avoid interference with prescription frame temples 


Code: 432951 


Pyramex Solo Safety Spectacles 


Integrated nose piece. Lightweight and economical. For use over 

prescription spectacles. Temples are vented to reduce fogging. 

Lenses provide 99% protection against harmful UV rays 


Code: 432950 

uvex super OTG Safety Over Spectacles 

CONFORMS TO EN 166 1F KN CE 

Unique frame design that fits comfortably over most prescription spectacles. uvex 

permanent lens coating technology: anti-fog coating on the inside of the lens, scratch 

resistant on the outside, anti-mist inside. Side arms graduate from hard to soft 

material for flexible, low pressure fit. Hi-resolution lens for improved optical clarity, 

especially when wearing two pairs of specs. Metal free. 100% UV protection 

Colour: Clear Polycarbonate Lens, Blue frame 


ANTI-MIST 

ANTI-SCRATCH 

GREAT VALUE 

KeepSAFE Hunter Safety Visitor Over Spectacles 

CONFORMS TO EN 166 1.FT 

Deep box style front profile – for wearing over all sizes of prescription eyewear. 

Polycarbonate lens. Fully vented sideshields. Ideal as visitors safety spectacles 

Colour: Clear lens, Clear frame 

Code: 293157 

KeepSAFE 5X7 Safety Over Spectacles 

CONFORMS TO EN 166 KN PROTECTION AGAINST UV400 

The ultimate overspec for prescription spectacles. Carefully designed frame 

prevents overlapping of temples for absolute comfort. SoftPad technology. 

Adjustable length of temples 

Colour: Clear anti-scratch/anti-mist K & N rated lens 

Code: 293201 

ANTI-MIST 

ANTI-SCRATCH 

135


Goggles with Attachable Visors 

Bollé Atom Safety Goggle K & N Rated 

CONFORMS TO EN 166 AND EN 170 1BT 3,4,5 KN 

Compact, lightweight and ultra comfortable. TPR flexible frame. Wide field of view. Wide adjustable strap adds 

to the comfort. Fits over prescription spectacles. Prescription insert is also available. Tear off lens protectors. 

Sealed version (Ventilated version available). Unique double sided anti-scratch and anti-fog Platinum ® K and N 

coating for excellent clarity and protection. 74g. Vented version available. Optical insert available 

Colour: Clear lens, blue frame Code: 293002 Manufacturer’s code: ATOEPSI 

Visor to fit Bollé Atom goggles. Optional face visor is fitted the Atom doubles up as a face shield 

CONFORMS TO EN 166 1BT 

Code: 293004 Manufacturer’s code: ATOV 

ANTI-MIST 

ANTI-SCRATCH 

ANTI-MIST 

ANTI-SCRATCH 

uvex ultravision goggle K & N Rated 

CONFORMS TO EN 166 1B 349 KN CE 

Panoramic field of vision. uvex permanent lens coating technology: anti-mist, scratch resistant, anti-static and 100% 

UV protection on both sides of the lens. Wide fully adjustable head strap fits all sized heads providing a secure 

pressure free fit. Can be worn comfortably over most prescription spectacles. 100% UV protection 

Colour: Clear lens. GOGGLE ONLY Code: 256424 Manufacturer’s code: 9301.105 

uvex ultravision visor 

Offers general protection, such as over-spray. Will fit over disposable respirators. The uvex ultravision goggle 

completely seals the eyes from debris while the polycarbonate lower face shield attaches onto the goggle providing 

increased facial protection 

Colour: Clear, VISOR ONLY Code: 430611 Manufacturer’s code: 9301.317 

GREAT VALUE 

KeepSAFE 6X3 Vented Safety Goggle 

CONFORMS TO EN 166 KN 3,4,9 

Panoramic lens can be perfectly worn over prescription glasses. Exclusive UDC coating. Facial support 

compatible with half masks. Indirect ventilation system ensures certified protection against drops and splashes. 

Category III PPE. Impact resistance at 432 km/h, even at extreme temperatures. Protects against liquid droplets, 

Dust, Gas and Molten Metals. Lightweight 75g 

Colour: Clear anti-scratch/anti-mist lens K & N Rated Code: 256100 

KeepSAFE Visor to suit 6X3 Goggle Code: 256101 

ANTI-MIST 

ANTI-SCRATCH 

Safety Goggles 

ANTI-MIST 

ANTI-SCRATCH 

KeepSAFE 6X1 Hybrid Safety Goggle 

CONFORMS TO EN 166 KN 3.4 

Perfect hybrid goggle combines the comfort and lightness of an eyewear with the advantages of a 

traditional goggle. The adjustable temples with SoftPad are interchangeable with the elastic band, 

offering complete versatility; the special design of the rubber leaning on the face ensures a protection 

certified in accordance with points 3 and 4 of EN 166 standard.. Wide lens for a field of view without 

distortion. Sophisticated indirect ventilation system. Soft internal rubber for comfort without local 

pressure. Certified according to EN166 point 3 (droplets and splashes) and point 4 (large dust particles) 

Colour: Clear lens Code: 256104 Each £15.99 

NEW 

3M Goggle Gear 500 Series GG501SGAF-EU Goggle 

Low profile design with an adjustable headband. Can accommodate an optional 

prescription insert. Scotchgard Anti-Fog lens coating resists fogging longer than 

traditional anti-fog coatings. 3M Scotchgard Anti-Fog Coating provides superior 

anti-fog properties, outperforming the requirements of EN166 N mark by 5 times. 

3M Scotchgard Anti-Fog Coating provides scratch resistance and durability, 

meeting the requirements of EN166 K mark. Coating retains its effectiveness even 

after multiple washes. Optical Class 1 for high optical clarity and prolonged wear 

Colour: Clear lens Code: 293248 Manufacturer’s code: GG501SGAF 

ANTI-MIST 

ANTI-SCRATCH 

Prescription Insert Code: 293249 Manufacturer’s code: GG500PI 

136

Safety Goggles 


CONFORMS TO EN 166 1BT KN 3 4 5 

Adjustable Isoprene Strap version available 

ANTI-MIST 

ANTI-SCRATCH 

ANTI-MIST 

ANTI-SCRATCH 

Bollé Cobra Hybrid Safety Spectacle K & N Rated 

CONFORMS TO EN 166 AND EN 170 1FT KN 

Ultra-purpose all rounder. A unique concept that offers the comfort of 

a safety spectacle with the fit and seal of a goggle. Adaptability of a 

fully adjustable and interchangeable strap and temples. Co-injected 

non-slip pivoting sports temples. Non slip bridge. 180° panoramic 

field of view. Unique double sided anti-scratch and anti-fog Platinum ® 

K and N coating for excellent clarity and protection. Optical class 1 

polycarbonate lens. Supplied with a free microfibre pouch 


Manufacturer’s code: COBFTPSI 

Code: 292971 

NEW 

uvex pheos CX2 sonic goggle 

Ultra-light, compact functional goggle with wide clear field of vision. Close fitting 

and less obtrusive than traditional goggles. The xtended eye shield combines 

hard and soft components which mould to the wearer creating a comfortable, 

effective seal around the eyes. uvex permanent lens coating technology: anti-fog 

coating on the inside, scratch-resistant on the outside. Increased durability and 

safety. Suitable for environments with high humidity - 100% UVA, UVB and UVC 

up to 400nm. Offers high levels of protection against 3 (liquids), 4 (coarse dust) 

and T (extreme temperatures). Very soft, light textile headband for secure and 

comfortable fit. Can be easily combined with other PPE 

CONFORMS TO EN166 1B 34T KN CE2 

Colour: Clear lens Code: 256422 Manufacturer’s code: 9309275 

CONFORMS TO EN166 1B 34T KN CE, EN172 

Colour: Sunglare lens Code: 256425 Manufacturer’s code: 9309286 

137


Faceshields 

Bollé Sphere Faceshield 

CONFORMS TO EN 166 AND EN 170 1AT 3,8,9 

Lightweight, flip-up face shield. Easy to replace polycarbonate optical class 1 visor. 

Excellent 180° vision. Zytel headgear (made from a mix of fibreglass, nylon and PVC). Fully 

adjustable head harness and browguard offering durability flexibility to fit all head shapes 

and sizes. Spare visor available. Universal safety helmet attachment available. 355g. 

Resistant to A High Energy Impact. Protective bag available 

Code: 293011 

Manufacturer’s code: SPHERPI 

Bollé Sphere Spare Polycarbonate Visor 

CONFORMS TO EN 166 AND EN 170 1AT 3,8,9 

Colour: Clear Code: 293012 Manufacturer’s code: FASPHERPI 

Bolle Flip-up Face Shield 

CONFORMS TO EN 166 1B 

At only 254 grammes this is lightweight and impact resistant. Face shield - polycarbonate flip-up. Dimensions face 

shield - 220mm x 390mm. Blue brow guard that protects the front of the head. Polycarbonate lens to protect against 

impacts. With three adjustable ratchets making - comfortable and outstanding value 

Code: 431671 

Bollé BL20 Helmet Adaptor For Faceshield 


Easy to replace optical class polycarbonate visor. Universal safety helmet attachment also available. Colour: Clear 

Code: 431526 

Manufacturer’s code: BL20HA 

Bollé BL20 Replacement Clear Polycarbonate Visor 

CONFORMS TO EN 166 1B 

Colour: Clear 

Code: 293015 

Manufacturer’s code: BL20PI 

Manufacturer’s code: BL20FAPI 

Honeywell SB600 Supervizor Browguard 

CONFORMS TO EN 166 B 3.9 

Polycarbonate browguard with ratchet headband. Full wrap-around visor. Colour: Grey 


Honeywell SV9PC Supervizor Polycarbonate Visor 

(Not illustrated) 

CONFORMS TO EN 166 1-B 3.9 

230mm clear polycarbonate visor 


Honeywell SV9AC Supervizor Acetate Visor 

CONFORMS TO EN 166 1-F.3 

200mm clear acetate visor 


KeepSAFE M510 Chinguard Facesaver 

with Polycarbonate Visor 

CONFORMS TO EN 166 1-B.3.9 

For protection against Liquid Splash and Molten Metal. Use when grinding, fettling and 

sandblasting. Polycarbonate browguard and chinguard 20cm (8") polycarbonate visor 

Code: 431502 

Replacement Visor for M510 

Size: 20cm (8") polycarbonate visor 

Code: 431503 

138

Faceshields 

NEW 

Tomcat 4430 Clear Polycarbonate Faceshield 

CONFORMS TO EN 166: 2001 AND EN 170: 2002 

Designed with lightweight comfort and heavy duty protection in mind. The one-hand precision ratchet headband 

equipped with a pad and hygienic absorbent sweatband ensures optimal adjustment to the users head. The 

durable browguard protects the forehead of the wearer against fluid splashes or flying debris. Anti-scratch and 

anti-fog coated full face clear polycarbonate visor which is replaceable with impact resistance (6 mm steelball 

with 432 km/h)Weight: 320g / 350g. Replacement visors available. 

Face Shield 


Replacement Visor 



Honeywell CV84A Clearways Acetate Visor 


200mm clear acetate visor 


Honeywell CB14 Clearways Browguard 

CONFORMS TO EN 166 B 3 

Browguard. Elasticated headband 

Colour: Grey Code: 431875 Manufacturer’s code: 1002346 

Honeywell CV83P Clearways Polycarbonate Visor 


CONFORMS TO EN 166 1-B 3 

200mm clear polycarbonate visor 


GREAT VALUE 

KeepSAFE Essential Faceshield 

CONFORMS TO EN 166.1.B.3.9 

Browguard. Elasticated headband. Unbound 20cm (8") clear polycarbonate visor. 

Supplied with visor 

Code: 290430 

KeepSAFE Spare Faceshield Visor 

CONFORMS TO EN 166.1.B.3.9 

Size: 20cm (8") polycarbonate visor 

Code: 290431 


KeepSAFE Modular Faceshield Unit 


Rigid polypropylene. Ratchet head harness. Browguard only 

Colour: Blue Code: 290401 

KeepSAFE Acetate Visor 


Low energy impact. Size: 20cm (8") bound 

Code: 254262 

KeepSAFE Polycarbonate Visor 


Medium energy impact. Size: 20cm (8") bound 

Code: 254261 

139


Welding Protection 

Bollé Volt Electronic Welding Helmet 

With Electro-Optical Filter 

CONFORMS TO EN 166, EN 175 AND EN 379 

Suitable for welding MIG / MAG, TIG and Grinding. 

Available with variable auto-darkening shade filter and a comfortable 

5 position headband. Variable shades 4/9-13. Grinding function. 

Reaction time: 0.10 MS. 2 Sensors. 480g 

Code: 256303 

Manufacturer’s code: VOLTV 

ANTI-SCRATCH 

Bollé Fusion+ Electronic Welding Helmet 

With Electro-Optical Filter 

CONFORMS TO EN 166, EN 175 AND EN 379 

Lightweight weighing only 525 grams. Filter measures 100 x 49 mm for extra 

large field of vision. Sensitivity and off-delay adjustments allow personalised setup. 

Variable tint between shades 6 – 8 and 9 – 13. Can provide clear view for 

grinding. Permanent DIN 16, UV and IR protection. Protective bag included 

Code: 256302 

Manufacturer’s code: FUSV 

ANTI-SCRATCH 

ANTI-SCRATCH 

Bollé Safety Slam Shade 2/3/5 Gas Welding Safety Spectacle 

CONFORMS TO EN166/169 

Wrap around fit. Polycarbonate anti-scratch lens. Lightweight, only 23g. Flexible 

sports temples. Supplied with a sports cord 

Shade 2 

Code: 431657 

Manufacturer’s code: SLAWPCC2 

Shade 3 

Code: 431957 


Shade 5 

Code: 431958 


Bollé Safety Tracker Shade 2/3/5 Gas Welding Goggle 

CONFORMS TO EN166/169 

Close fitting low profile goggle. Polycarbonate anti-scratch lens. Removable 

adjustable strap. Removable foam seal. Supplied with a microfibre pouch 

ANTI-SCRATCH 

Shade 2 

Code: 431959 

Manufacturer’s code: TRACWPCC2 

Shade 3 

Code: 431960 


Shade 5 

Code: 431961 


ANTI-SCRATCH 

Bollé Safety Superblast Shade 5 Gas Welding Goggle 

CONFORMS TO EN166 3 4 9 BT 

Excellent all round vision. Fits over prescription specs. Wide adjustable pivoting 

strap. Compatible with a half mask. Anti-scratch polycarbonate lens 

Code: 293003 

Manufacturer’s code: BLAWPCC5 

140

Natural 

Colour 

Technology. 

Advanced 

auto-darkening 

filter technologies 

providing natural 

colour and variable 

dark state colours 

Optional task 

light specifically 

designed 

for welding 

Adjustable airflow 

to control your comfort 

3M Speedglas 

Heavy-Duty Welding Helmet G5-01 

Based on extensive input from welders who need to grind frequently, the 

3M Speedglas Heavy Duty Welding Helmet G5-01 is created to be adaptable. 

Code 276961 

3M’s lightest Assigned 

Protection Factor (APF) 

1000 helmet 

Introducing the world’s first curved 

auto-darkening welding filter, 

3M Speedglas Welding Helmet G5-02. 

Code 276965


Vented Goggles 

NEW 

Bollé BL15 Vented Safety Goggle 

CONFORMS TO EN 166 3 4 9 BT 

Double sided anti-mist. Close fitting with good field of view. 

Lightweight. Adjustable strap. Optical class 1 polycarbonate lens. Sealed version available 

Code: 292898 Manufacturer’s code: BL15APSI 

ANTI-MIST 

Bollé Pilot Vented Safety Goggle K & N Rated 

ANTI-MIST 

CONFORMS TO EN 166 AND EN 170 1BT 3,4 KN 

ANTI-SCRATCH 

Ultra flexible co-injected TPR housing for increased comfort. Wide fully adjustable 

strap guarantees the wearer optimum levels of fit and comfort. Toric optical class 1 

polycarbonate lens. Excellent field of view. Fits over prescription spectacles. 

Also available in CSP: PILOCSP and Smoke: PILOPSF. 89g. Plantinum coating anti-mist 

and anti-scratch to K and N. Neoprene version available 

Code: 292923 

Manufacturer’s code: PILOPSI 

Smoke 

CSP 

Smoke 

CSP 

Bollé Baxter Vented Safety Goggle K & N Rated 

ANTI-MIST 

CONFORMS TO EN 166 1FT WITHOUT HEADBAND / EN 166 1BT 3 4 5 WITH HEADBAND 

ANTI-SCRATCH 

Provides the comfort of a safety spectacle with the fit and seal of a goggle. Interchangeable foam 

seal which gives added brow and cheek protection. Fully adjustable strap that can also be removed. 

Straight sports temples. Optical class 1 polycarbonate lens. Unique double sided anti-scratch and 

anti-mist Platinum K and N coating for excellent clarity and protection. Wrap around base 8 curve. 

Fantastic field of view and side ventilation. Also available in CSP: BAXCSP and Smoke: BAXPSF. 53g. 

Polarised version available 

Code: 431544 Manufacturers’s code: BAXPSI 

Bollé Coverall II Vented Safety Goggle 

CONFORMS TO EN 166 AND EN 170 1BT 3,4 

Polycarbonate, vented. Sealed PVC frame. Protection against impact, chemicals, 

large and fine dust particles. Anti-scratch and anti-fog. Optical class 1 

polycarbonate lens. Fits over prescription spectacles. 91g. Sealed version available 

Code: 431545 

Manufacturers’s code: COVARSI. 

ANTI-MIST 

ANTI-SCRATCH 

ANTI-MIST 

ANTI-SCRATCH 

Bollé X90 Low Profile Indirect Vented Safety Goggle 

CONFORMS TO EN 166 1BT 

Small, ultra compact goggle. All enveloping flexible PVC frame. Panoramic field of view. 

Indirect ventilation. Optical Class 1 polycarbonate. Wide strap enhances the comfort and fit. 

62g. Anti-mist and anti-scratch 

Colour: Clear lens, clear frame Code: 292926 Manufacturers’s code: X90PSI 

Bollé Atom Safety Goggle K & N Rated 

CONFORMS TO EN 166 AND EN 170 1BT 3 KN 

Compact, lightweight and ultra comfortable. TPR flexible frame. Wide field of view. Wide adjustable 

strap adds to the comfort. Fits over prescription spectacles. Prescription insert is also available. 

Tear off lens protectors. Ventilated version (Sealed version available). 74g. Platinum coating. 

Anti-mist and anti-scratch. Visor attachment available 

Colour: Clear lens, blue frame Code: 293001 Manufacturer’s code: ATOAPSI 

ANTI-MIST 

ANTI-SCRATCH 

142 

ANTI-MIST 

ANTI-SCRATCH 

KeepSAFE Pro 619 Avenger K & N Rated Safety Goggle 

CONFORMS TO EN166 K & N: 3.4.9 

Very light, only 84 grams. Linear and compact design. Can be worn over any prescription spectacles 

thanks to its spherical lens. Indirect ventilation system. Wide, fully adjustable headband. Soft rubber 

seal for comfort and reduced local pressure. Colour: Clear anti-scratch/anti-mist K & N rated lens 

Code: 256109

Non-vented Goggles 


Bollé Attack Safety Goggle 

CONFORMS TO EN 166 AND EN 170 1BT 3,4,5,9 

Patented design. Unique “comfort zone” 

cushions the frame of the goggle against 

the face providing maximum comfort and 

protection. Fits over prescription spectacles. 

Fitted with a wide adjustable headband. 

Optical Class 1 polycarbonate lens. Provides 

protection against impact, chemicals, dust and 

molten metal. Anti-mist and anti-scratch 

Colour: Clear lens, crystal frame 

Manufacturer’s code: ATPSI 

Code: 293247 

ANTI-MIST 

ANTI-SCRATCH 

NEW 

Bollé Coverall Goggle 

CONFORMS TO EN 166 AND EN 170 1BT 3,4,5 KN 

Sealed PVC frame. Protection against impact, 

chemicals, large and fine dust particles. 

Unique double sided anti-scratch and antimist 

Platinum ® K and N coating for excellent 

clarity and protection. Optical class 1 

polycarbonate lens. Adjustable nylon strap. Fits 

over prescription spectacles. Cost effective 

and functional. Ventilated version available 


Manufacturer’s code: COVERSI 

Code: 431672 

ANTI-MIST 

ANTI-SCRATCH 

Bollé Blast Safety Goggle 

CONFORMS TO EN 166 AND EN 170 1BT 3,9 

Unique shape of the goggle ensures a perfect fit with all respirators and with 

the face providing maximum comfort and protection. Fits over prescription 

spectacles. Fitted with a wide pivoting adjustable headband. Optical class 

1 polycarbonate lens. Anti-scratch and anti-mist. Overflow chute for liquids. 

Provides protection against impact, chemicals, dust, gas and molten metal. 

Available in vented, sealed and foam versions. Optical insert available 

Colour: Clear lens, Blue frame 

Code: 292999 Manufacturer’s code: BLAPSI 

Bollé Blast Visor 

(For Use With Bollé Blast Goggle) 

CONFORMS TO EN 166 B 

Fits to all versions of the Blast goggle. When combined serves the same 

purpose as a visor but provides even more protection for the wearer’s eyes 

Code: 293000 

Manufacturer’s code: BLV 

ANTI-MIST 

ANTI-SCRATCH 

JSP Liquid & Dust 

Safety Goggle 

CONFORMS TO EN166 1.B.3.4 

A compact and lightweight goggle 

offering high resistance to impact 

from flying particles. Indirect 

vent body offers protection 

against liquid droplets, dust 

and molten metal body. 

Tough clear polycarbonate 

scratch resistant Hardia lens. 

Fully adjustable 

strap for good fit 

Colour: Clear 

Manufacturer’s code: AGC020-301-300 

Code: 431978 

ANTI-MIST 

ANTI-SCRATCH 

ANTI-MIST 

ANTI-SCRATCH 

ANTI-MIST 

ANTI-SCRATCH 

uvex u-sonic clear 

lens goggles K & N Rated 

CONFORMS TO EN166 1B 34 KN CE, EN170 2C-1.2 

Compact, low profile, wraparound goggle 

adapts to any facial shape for a low pressure 

seal, that guarantees a good fit. Light fullvision 

goggles. Anti-fog and scratch-resistant 

uvex supravision coating. Wide, low pressure 

headband for long-term comfortable wear 



Code: 254037 

ANTI-MIST 

ANTI-SCRATCH 

uvex u-sonic grey sunglare 

lens goggles K & N Rated 

CONFORMS TO EN166 1B 34 KN CE, EN172 

Compact, low profile, wraparound goggle adapts 

to any facial shape for a low pressure seal, that 

guarantees a good fit. Light full-vision goggles. 

Anti-fog and scratch-resistant uvex supravision 

coating. Grey sunglare lens for when sunlight 

and glare may be a hazard 

Colour: Grey Sunglare lens 


Code: 254038 

uvex ultrasonic goggle K & N Rated 

CONFORMS TO EN 166 1B 349 KN CE 

Based on a ski goggle design: extremely lightweight and excellent 

field of vision. uvex permanent lens coating technology: antifog 

coating on the inside and scratch-resistant on the outside. 

Innovative frame combines hard and soft components which mould 

to all facial shapes and protects against droplets, splash and 

dust particles. Also aids compatibility with other PPE. Wide fully 

adjustable head strap - secure pressure-free fit. Can be worn over 

most prescription spectacles. 100% UV protection. Optical class 1 – 

for the best optical quality 

Colour: Clear lens. Orange/Grey frame 


CONFORMS TO EN 166 1B 349KN CE, EN 172 

Colour: Brown Sunglare lens 


143


Safety Eyewear Accessories 

Current PPE directives state that employers who issue employees with PPE must also 

provide facilities for effective maintenance and storage of the equipment. 

uvex lens cleaning station 

Helps prolong product life and increase safety. 

Complete station includes: 4 boxes - non abrasive 

lens cleaning tissues, 1 x 16oz bottle of cleaning 

fluid, Mirror. Fixtures for wall mounting 

Dimensions: 340mm(W) 480mm(L) 165mm(H) 


Code: 293464 

uvex replacement cleaning solution 

Content - 16fl oz 


Code: 293457 

uvex replacement cleaning tissues 

Approx. 450 sheets 


Code: 293465 

uvex cleaning towelettes 

100 moist silicone-free cleaning tissues. Individually 

wrapped – ideal for cleaning eyewear on the go 


Code: 293456 Each £11.95 

uvex neck hanging cord 

Offers ease of use especially for those that may pass 

through areas of mandatory eyewear. Universal fitting 


Code: 431417 Each £2.00 

uvex polyester spectacle bag 

Protects specs when not in use 


Code: 431418 Each £1.49 

144 

uvex polyester goggle bag 

Ideal for storing goggles when not in use 


Code: 293459 Each £1.90 

uvex zipper spectacle pouch 

Robust spectacle case with reinforced zipper 

and Velcro belt loops. Additional space for spare lenses 


Code: 015448 Each £4.40 

uvex zipper goggle pouch 

Large and very robust goggle case with zipper and belt 

loop. Additional space for spare lens 


Code: 431419 Each £10.30

Safety Eyewear Accessories 


Bollé Lens Cleaning 

Station 

Lockable metal, wall mounted (or 

can be free standing) Comes with 

500ml anti-static lens cleaner and 2 

boxes of tissues. Replacement lens 

cleaners and tissues also available. 

Cleans all types of lenses 

Manufacturer’s code: B600 

Code: 292990 


Station Tissues 

Box with 200 micro tissues. 

Fits B600 lens cleaning station 


Code: 292991 


Station Solution 

500ml bottle. 

Fits B600 lens cleaning station 


Code: 292992 

Bollé B100 Lens 

Cleaning Wipes 

100 individually wrapped lens 

cleaning wipes 


Code: 293034 

Bollé Spectacle Fit Case 

with Belt Loop 

Large black flexible polyester fit case 

with belt loop 

Bollé Snap-shut 

Spectacle Case 

Clic-clac black polyester pouch 

Bollé Microfibre Bag 

For Spectacles 

Black microfibre bag for all type 

of spectacles 

Bollé B500 Lens 

Cleaning Wipes 

Wall mountable lens cleaning 

wipe dispenser. 500 individually 

wrapped lens cleaning wipes 


Code: 292814 

Manufacturer’s code: ETUIC 

Code: 431525 Each £3.87 

Manufacturer’s code: ETUIS 

Code: 292994 Each £1.86 

Manufacturer’s code: ETUIFS 

Code: 292993 Each £1.43 

Bollé Mirco Fibre Bag 

For Goggles 

Black microfibre bag for all types 

of goggles 

Bollé Spectacle Case 

with Belt Clip and Loop 

Black polyester case with belt 

clip and loop 

Bollé Semi-rigid Fit Spectacle 

Case 

with Belt Loop 

Large black semi-rigid polyester 

fit case with belt loop 

Bollé B200 Lens Cleaning Kit 

Anti-mist, anti-static lens cleaning 

microfibre cloth for all types of lenses. 

Single application lasts at least 

48 hours. Packed in cartons of 10 

Manufacturer’s code: ETUIFL 

Code: 292889 Each £2.33 

Manufacturer’s code: ETUIB 

Code: 292998 Each £3.39 

Manufacturer’s code: ETUICR 

Code: 292996 Each £4.24 


Code: 292815 Each £8.30 

145

Head Protection 

Buying Guide 


EN 397 specifies physical and performance requirements of industrial safety helmets. Certain 

tests are mandatory if the product is to receive EN 397 approval. 

These cover: 

• Shock absorption 

• Resistance to penetration 

• Flame resistance 

• Chinstrap anchorage 

A manufacturer can choose to submit his products to additional optional tests. Such tests 

could lead to one or more of these markings appearing on a helmet. 

-20°/-30°C The helmet will provide some protection when worn in an environment at or 

above this temperature. -40°C ultra low temperature (outside of EN 397) 

440V a.c. The helmet will protect against short-term, accidental contact with live electrical 

conductors up to this voltage 

LD The helmet will provide some resistance to lateral compressive (non-impact) loads 

MM Molten Metal splash test 

EN 14052 Builds on EN 397 to include more onerous tests and requirements, but also to 

include requirements for additional impact protection to the front, rear and sides of the head. 

It also includes performance tests for the retention system (typically headband and chin 

strap), not typically included in EN 397. 

EN 50365 Electrically insulating helmets for use on low voltage installations 

EN 812 Is the standard for Industrial Bump Caps, which are intended to provide protection 

against bumps caused by walking into hazardous projections. A Bump Cap does not provide 

protection against falling or thrown objects and should not be used where a safety helmet is 

required 

EN 12492 Helmet for Mountaineers 


Identifying Hazards 

A safety helmet is required in almost every industry 

where there is a risk of being injured by falling 

objects. In areas of restricted head space where 

accidental bumping of the head could be involved 

(e.g. Overhead piping) a scalp protector (bump 

cap) should be considered. Bump caps are not a 

substitute for safety helmets and must not be used 

to protect the head from falling objects. 

Identifying Materials 

Shells are primarily made using UV stabilised high 

density polyethylene (HDPE) or ABS (Acrylonitrile 

Butadiene Styrene). Harnesses are made using low 

density polyethylene or textile webbing. 

Care And Maintenance 

A helmet may be cleaned with soap and water, 

drying with a soft cloth. A helmet should not be 

cleaned with abrasive substances or solvents and 

must not be stored in direct sunlight or in contact 

with chemicals. 

The wearer should inspect their helmet regularly. 

Any helmet showing more than superficial abrasions 

or scuffing to the shell should be replaced. 

Shelf Life 

To comply with European Standards, all helmets 

are marked with the quarter or month and year 

of manufacture. If helmets are stored in boxes in 

which they were supplied and do not experience 

environmental extremes, the shelf life of a helmet 

is not limited. However, it is not recommended that 

a helmet should be in use five years after date of 

manufacture. 

So What Are The Differences? 

A helmet is not just a helmet. They have many 

different features providing specific user benefits, 

such as: 

• Weight: Some helmets are lighter than others. 

A lightweight helmet may provide more comfort 

during prolonged periods of use 

• Cradle: A helmet can have either a basic 

polyethylene cradle or a more comfortable textile 

webbing cradle 

• Sweatband: A helmet can have either none, 

a standard or a high absorbent sweatband for 

improved comfort during use 

• Ventilation: Some helmets are ventilated, 

providing cooling airflow during use 

• Badging: Some helmet designs allow for a larger 

front badging area, for an enhanced corporate 

image 

• Peaks: Peak lengths can vary – a reduced peak 

is available for improved upward visibility 

• Retro-Reflective Surfaces: Reflective surfaces 

that provide greater visibility of the wearer in low 

light conditions 

146



147


Centurion Premium Safety Helmets 

Centurion Concept Vented Full Peak Safety Helmet 

CONFORMS TO EN 397, LD, -40°C, EN 50365 1000V A.C. 

Maximum impact and lateral deformation protection. Extremely lightweight ABS Shell 

weighs 318g, 20% lighter than most other helmets. Terylene cradle and Dry-Tech 

sweatband. Extra nape protection. Crown and rear ventilation holes. Patented Combi 

Slot for accessories. Compatible with Centurion Connect range of face and hearing 

accessories. 40mm peak 

• Size: 51-63cm 

Colour: White 

Code: 271135 


Code: 271189 


Code: 271225 

Colour: Blue 

Code: 271236 

Manufacturer’s code: S09WF 

Manufacturer’s code: S09YF 

Manufacturer’s code: S09OF 

Manufacturer’s code: S09BF 

Centurion Concept Vented Reduced Peak Safety Helmet 

CONFORMS TO EN 397, LD, -40°C, EN 50365 1000V A.C. 

20% lighter than most other helmets. Maximum impact and side protection. 6 point 

Terylene cradle with high absorbent sweatband. Unique ventilation system for improved 

airflow. Compatible with Centurion Connect range of face and hearing accessories. 

20mm peak 

• Size: 51-63cm 


Code: 271134 

Manufacturer’s code: S08WF 

Centurion Concept Vented Full Peak Wheel Ratchet Safety Helmet 

CONFORMS TO LD, -40C, EN 50356 1000V A.C. 

Maximum impact and lateral deformation protection. Extremely lightweight ABS shell - weighs 300g, 20% lighter 

than most other helmets. Maximum comfort and balance for prolonged wear. Terylene cradle and hydro-flock 

sweatband. Extra nape protection. Crown and rear ventilation holes. Connect slot compatible with modular 

accessories 

Colour: White 

Manufacturer’s code: S09CWR 

Code: 271222 

Colour: Blue 

Manufacturer’s code: S09CBR 

Code: 271223 

148 

Centurion Spectrum Overspec Safety Helmet 

HELMET CONFORMS TO EN 397, -40°C, 1000V A.C, LD, MM & EN 50365 

SPECTACLES CONFORM TO EN 166 1 B T & EN 170 2C-1, 2 

A revolution in the integration of spectacles within industrial safety helmets. Added side impact protection (Lateral 

Deformation within EN397). AquaDirect Rain Management system reduces water flow down the back of the neck. 

Unique Venturi system provides optional ventilation for comfort during warmer conditions. Anti-mist/anti-scratch 

coating on over-spectacles, with soft nose bridge for comfort. Full adjustment allows for use over prescription 

eyewear: front pivot allows over-spectacles to be adjusted closer to the cheek, for improved dust protection 

• Size: 51-63cm 


Code: 272446 

Manufacturer’s code: S20WRF 

Centurion Vision Plus Safety Helmet 

HELMET CONFORMS TO EN 397, EN166 - 1 A T (EN170) 2C-1, 

2, -30°C, & EN 50365 

A revolution in the integration of spectacles within 

industrial safety helmets. 

Grade A high energy impact protection to EN 166; 

providing the highest impact protection possible. Antiscratch 

and anti-mist coating. Designed to allow you 

to wear prescription eyewear. Moulded design provides 

improved lower cheek coverage 

• Size: 51-63cm 

• Colour: White, Yellow, Red, Blue, Green 

Code: 431346 

Manufacturer’s code: S10

Centurion Nexus Safety Helmet System 

GREAT VALUE 


Alpha Solway 

Rockman C3 Safety Helmet 


Safety helmet with 6-point plastic suspension 

harness and pinlock adjustable headband. 12 

ventilation holes. Slots (30mm) for hearing or eye 

protection accessories. Pinlock adjustable headband. 

Plastic sweatband. 4-point self-releasing chin-strap 

mounts. Rain gutter. Available in White, Red, Blue, 

Green, Black, Orange, Yellow 

Manufacturer’s code: C3 

Code: 432693 

Alpha Solway 



Safety helmet with 4-point suspension harness and 

pinlock adjustable headband, ratchet optional. 12 


protection accessories. Pinlock or ratchet adjustable 

headband (model dependant). Fleece sweatband. 4-point 

self-releasing chin-strap mounts. Rain gutter.Available in 

White, Red, Blue, Green, Black, Orange, Yellow 


Code: 432694 

Alpha Solway 



Safety helmet with 6-point suspension harness and 

pinlock adjustable headband, ratchet optional. 12 


protection accessories. Pinlock or ratchet adjustable 

headband (model dependant). Fleece sweatband. 4-point 

self-releasing chin-strap mounts. Rain gutter. Available in 

White, Red, Blue, Green, Black, Orange, Yellow 


Code: 432695 

Centurion Nexus 

SecurePlus Vented 

Safety Helmet 

Our pioneering Nexus 

SecurePlus safety helmet 

combines advanced 

industrial safety standards with modern recreational 

styling – including a 4-point quick release chinstrap for 

added stability and comfort, with non-vented shell for 

improved electrical resistance. SecurePlus 4-Point EN 

397 chinstrap providing additional wearer comfort and 

helmet stability. Chinstrap side adjusters for improved 

wearer fit and comfort. “Micro“ peak for maximum 

upward visibility. Unique rear shell design providing 

nape protection and freedom of movement. Approved 

to: EN 50365, CSA/CAN Z94.1-05 Type 1 Class C 

(Conductive 0V a.c.) Vented Ratchet version only, Tested 

to the performance requirements of AS/NZS 1801:1997. 

Reflective Stickers (sold separately) 

Manufacturer’s code: S16EWRL 

Code: 272018 


Core Vented Safety Helmet 

Combines stylish looks with multi-standard protection. 

Its innovative accessories 

allow adaptability in the field to suit specific tasks at 

hand. Optimised ‘micro’ peak providing maximum 

upward visibility without compromising safety. High 

performance ABS shell for improved low temperature 

and side impact protection. Unique rear shell design 

providing increased nape protection. Premium Twist2Fit 

Ratchet headband for easy adjustment. Optional 

innovative ventilation system for improved airflow and 

wearer comfort. Euro accessory slots for compatible 

face screens and ear defenders. Shown with High 

Intensity Reflective Stickers (272059 sold 

separately, other colours available) 

Colour: Ratchet, White 

Code: 272026 Manufacturer’s code: S16EWRF 


Heightmaster Safety Helmet 

APPROVED TO EN 12492, ANSI/ISEA Z89.1 

CONFORMS TO EN 50365 AND EN 397 

SHOCK ABSORPTION, PENETRATION, LD & -40°C 

The ideal working at height vented safety helmet 

approved to EN 12492. Micro peak for improved 

visibility. Lightweight replaceable liner. 4 point EN 

12492 replaceable chinstrap for improved comfort. 

Fitted with premium wheel ratchet. Shown with High 

Intensity Reflective Stickers (sold separately) 


Manufacturer’s code: S16EWFMR 

Code: 272424 

Centurion Nexus Liner 

Lightweight and compact liner for 

improved impact and penetration 

protection. Adds extra protection in 

conjunction with the EN 12492 

S30NY harness, upgrading Core 

to HeightMaster 

Manufacturer’s code: S30NL 

Code: 272029 

Centurion Linesman 

EN 397 Chinstrap 

Linesman 4-point EN 397 Chinstrap 

providing additional wearer comfort and 

helmet stability. Fits Centurion Concept, 

Nexus and Reflex helmets 

Manufacturer’s code: S30LY 

Code: 272027 Each £8.13 

Centurion Replaceable 

EN 12492 Chinstrap 

High quality replaceable Nexus 4-point 

Chinstrap with easy side adjustment 

provides approval to EN 12492 working 

at height (Mountaineering Helmet 

standard) in conjunction with S30NL liner 

Manufacturer’s code: S30NY 

Code: 272028 

Also available-Retractable 

Eyeshields, ask for details 

149


Quality Safety Helmets 

JSP ® EVOLite ® Safety Helmet 

CONFORMS TO EN 50365, LD, MM. 

The lightest, strongest EN 397 helmet, weighing only 285g*. 

ABS shell weighs under 300g, around 20% lighter than standard 

safety helmets. Meets both LD (lateral deformation) and MM 

(molten metal) tests. Ventilation reduces helmet temperature by 

an average 2-3 degrees. International slots conform with Surefit 

attachments. 6-point terylene cradle harness system provides 

unrivalled comfort. Unique 1-2-3 point harness depth setting 

system gives 3D precision fitting, the most precise fit available 

on an industrial safety helmet.* dependent on model. 

• Colour: White (also available in Blue, Orange, Black) 

Colour: White - Slip Ratchet 

Manufacturer’s code: AJB160-000-100 

Code: 272395 

Colour: White - Wheel Ratchet 


Code: 272377 

JSP ® EVOLite ® 

Skyworker Safety 

Helmet 


(MOUNTAINEERING HELMET 

STANDARD), EN397 (SHOCK AND 

PENETRATION), LD, -40OC 

Lightweight high grade ABS with 

micro peak. Four point 'x-over' 

chinstrap. Wheel ratchet easy 

adjustment system to enable 

firm and comfortable fit 

• Size: 53-64cm 


Manufacturer’s code: AJS260-000-100 

Code: 272558 

JSP ® EVOLite ® CR2 

Reflective Slip Ratchet 


CONFORMS TO EN397 & EN12899 1 

REFLECTIVE DECALS MEET CLASS 

R2 REFLECTIVE REQUIREMENTS OF 

EN12899 1 

Over 50% more reflective than 

High Vis clothing requirements. 

Biggest step-up in head 

protection visibility/reflectivity. 

Strong HDPE Slip Ratchet 

• Size: 53-64cm 



Code: 272396 

KeepSAFE Comfort Plus Full Peak Safety Helmet 

APPROVED TO EN 397, MM, -30°C, ANSI/ISEA Z89.1 

General purpose helmet with 6 point Terylene cradle and brushed nylon sweatband. Size: 51-63cm 

Colour: White Code: 271290 


Colour: Yellow Code: 271292 

Colour: Red Code: 271293 

Colour: Orange Code: 271294 


KeepSAFE XT Vented Wheel Ratchet 

APPROVED TO EN 397, ANSI/ISEA Z89.1 

General Purpose helmet with a 6 point Terylene cradle and brushed nylon sweatband. 

Vented for airflow and comfort. Fitted with Premium Wheel Ratchet 



Colour: Yellow Code: 271299 

150 

KeepSAFE Standard 

APPROVED TO EN 397, 440V A.C, MM, -10°C 

General Purpose helmet with a 6 point plastic cradle. Fitted with Slip Ratchet 



Colour: Yellow Code: 271283

Specialist Safety Helmets 

Centurion Vulcan High Heat Safety Helmet 

CONFORMS TO EN 397: 2012. AND ANSI/ISEA Z89.1-2009 TYPE 1 CLASS G. 

Designed for use in industries where there is a risk from high levels of radiant heat. 

Brushed nylon sweatband. Terylene cradle. Fully compatible with Centurion hightemperature 

range of accessories. Front, side and rear corporate badging area. 

Ratchet adjusts to size 51cm to 63cm 

• Colour: White (also available in Yellow, Green, Orange, Red) 

Code: 272443 

Manufacturer’s code: S22WA 

NEW 

3M G2000 


CONFORMS TO EN 397:2012+A1:2012 

lightweight head protection with 

a ventilated inlet and headband for 

comfort, use 3M Hard Hat, G2000CUV-VI. Our white hard hat features a 

plastic sweatband with pinlock suspension and an extended edge on the back 

which provides extra protection for the sensitive neck area. A flat surface 

on the front of the hard hat means a brand name or logo can be added and 

a 3M Uvicator sensor disc tells you when your hard hat has been over 

exposed to UV-radiation and it’s time to replace it. It also features a ventilated 

plastic headband for comfort and hygiene 




Forestry Protection 

Centurion 1100 Classic Forestry Kit 

CONFORMS TO EN 352-3, HELMET TO EN 397:2012+A1:2012, MESH EN1731:1997 

Complete system – safety helmet, face shield, ear muffs rain shield. Lightweight and 

comfortable HPDE helmet complete with mesh forestry visor and hearing protection 


• Weight: 375g 

Code: 272579 

Manufacturer’s code: S251E0CF 

SNR 

28 

3M Peltor G500 Forestry Headgear 

CONFORMS TO EN 352-3 AND VISOR CONFORMS TO EN 1731F H=33 M=25 L=15 SNR=27 

G500V5CH510 OR 5C visor and Optime 1 ear muffs. Up/down in 3 positions. 

Ergonomic, adjustable ratchet harness – eight positioning. Can use in conjunction 

with 3M integrated eyewear and communication ear muffs 


Code: 276713 

Manufacturer’s code: G500V5CH10-OR 

SNR 

27 

3M Peltor G500 Industry Headgear 

EAR MUFFS CONFORMS TO EN 352-3 H=32 M=25 L=15 SNR=27 

VISOR CONFORMS TO EN 166 ABT 

G500V5FH510-EU–5F-1 visor and Optime I ear muffs. Frontal lobe ventilation 

channels. Up/down in 3 positions. Ergonomic, adjustable ratchet harness – 

eight positioning. Can use in conjunction with 3M integrated eyewear and 

communication ear muffs 


Code: 276712 

Manufacturer’s code: G500V5FH510-EU 

SNR 

27 

151


Helmet Accessories 

Combine and interchange head, face and hearing accessories quickly and simply, fully compatible with all Centurion helmets. 

Centurion S30E 

Connect ® Chinstrap 

Elasticated chinstrap with chin cup for extra security 

Code: 272432 

Manufacturer’s code: S30E 

Centurion Scala X Ear Defenders 

SNR LEVEL: 25DB. APPROVED TO EN 352 

Suitable for most general requirements 

(replaced the Baltic) 


Code: 254255 

Manufacturer’s code: S71CE 

Centurion Scala XI Ear Defenders 

SNR LEVEL: 30DB. APPROVED TO EN 352 

Excellent noise protection, especially for high 

frequencies (replaced the Aegean) 


Code: 254412 


Centurion S31N 

Connect ® Nylon Sweatband 

Brushed nylon sweatband for improved comfort 

Code: 272409 

Manufacturer’s code: S31N 

Centurion Contour General 

Multi Screen 

Contour XI screen designed to protect against Arc 

Flash risks posed by electrical faults, and tested 

in accordance with EN 166 impact protection. 

Polycarbonate moulded screen for both impact 

protection and Arc protection. NEW easy fit screen. 

Anti-fog, anti scratch coating. Integrated Chinguard 

Code: 272053 

Manufacturer’s code: S810 

Centurion Contour Carrier 

Carrier for use with Contour XI Multi Purpose Moulded 

Face Screen and Contour X General Purpose 

Moulded Face Screen. Low profile, pivoting 

system follows helmet contour for improved balance 

and versatility. Unique TPE rubber collar is fitted as standard to help block falling 

debris. Multi pivot functionality for maximum versatility. Complete with Euro 30mm 

accessory compatibility. Contour system is for fitting to Nexus and Concept helmets 

Code: 272052 


Centurion Contour 

General Purpose Screen 

Face screen with General Purpose Impact protection. 

Polycarbonate moulded screen for impact protection. 

NEW easy fit screen for versatility 

Code: 272049 

Centurion S54 

Connect ® Face Screen Carrier 


Flip-up facility. Accepts all Connect face screens. 

Can be used with Connect earmuffs 

Code: 272469 


Centurion S590 Connect ® Polycarbonate Face Screen 

CONFORMS TO EN 166 1.B.9.3 • Size: 225mm (9") 

Code: 272460 


Centurion ® S591 Connect ® Acetate Face Screen 

• Size: 225mm (9") 

Code: 430506 



CAD designed system, for precise fit and wearer comfort. Compatible with the EVOlite and EVO range of safety helmets. 

JSP InterEx Ear Defenders 

CONFORMS TO BSEN 352-3 H= 32 M=26 L=19 SNR=29 

Large cups provide protection for high levels of noise. 

Fits a universal slot. Spring loaded arms for an excellent 

fit to the ear. Stand off from the head when not in use. 

Colour: Black 

Code: 254222 

Manufacturer’s code: AEK020-005-400 

JSP EvoSpec © Retractable 

Eyeshield Helmet Attachment 


Easy assembly kit for adding retractable 

eyeshields to an existing EVOLite © helmet. 

Colour: Clear 

Code: 254500 

Manufacturer’s code: ANT010-200-000 

JSP Helmet Attachment-Abs 

Visor Carrier JSP Evo Surefit 

Helmet Attachment-Abs Visor Carrier JSP Evo Surefit 

Code: 254224 

Manufacturer’s code: ANJ000-001-111 

JSP Evo Polycarbonate Visors 

CONFORMS TO EN 1661.B.3.9 

Offers protection against medium energy 

high-speed particles and liquid drops 

Code: 254272 

Manufacturer’s code: NX060-230-000 

JSP Chamlon Sweat Band 

For EVO Range helmets. Chamlon Egyptian cotton 

core with porous PU coating for maximum sweat 

absorption. PH neutral, dermatologically tested 

Code: 271214 

Manufacturer’s code: AJA840-000-200 

JSP Surefit Elasticated Chinstrap 

without Chin Cup 

To fit JSP helmets meeting the requirements of EN397 

Code: 271300 

Manufacturer’s code: AHV001-100-000 

JSP Surefit Deluxe Chin Strap 

and Chin Cup 

To fit JSP helmets meeting the requirements of EN397. 

Releases automatically with forces between 150 and 250 Newtons 

Code: 271219 

Manufacturer’s code: AHV000-500-000 

152


Comfort 

without 

compromise. 

The new 3M SecureFit 

Safety Helmet for comfort 

and protection of those who 

work at and around height. 

Features and benefits 

4-point or 6-point ratchet suspension 

allows wearer to customise height and fit 

This product line meets (and has the 

ability to convert to either) EN 12492 

or EN 397 compliance standards for 

commercial headwear 

Customise your fit with multiple levels 

of vertical adjustment 

Works with a variety of 3M accessories 

Common applications 

Construction 

Manufacturing 

Oil, gas and wind utilities 

Forestry 

Any commercial trade that 

works at or around height 

Contact us for more information 

153


Dry Helmet Cooling 

Centurion Kalis Dry Cooling 

Helmet Pad 

This new patented Dry Cooling innovation provides 

enhanced cooling comfort for the wearer as it is 

100% dry and cools the head down to 15°C below 

ambient temperature. Activation is only required 

every 1-3 days (dependent on humidity and airflow). 

Anti-bacterial. 

Utilises technology found in high end sports clothing 

Code: 271417 

Manufacturer’s code: S31DCHP 

Cold Weather Hood Systems 

S50FL Centurion ® 

Universal Fleece Liner 

Keeps head, ears, neck warm. Fits between cradle 

and helmet shell. Full integration, plus helmet security. 

CE approved to fit all listed Centurion ® helmets 


Manufacturer’s code: S50UFL 

Code: 271211 

Centurion ® 

High Visibility Sun Cape 

Lightweight Sun Cape that protects against 

UltraViolet UPF 50+, blocks 98% of UV 

radiation. Using fabric developed specifically to 

keep the wearer dry, cool and comfortable. CE 

approved to fit all Centurion helmets. Conforms 

to EN 471 


Manufacturer’s code: S51HVO 

Code: 271440 


Manufacturer’s code: S51HVY 

Code: 271439 

154 

S50HVYFC Centurion ® 

Helmet Frost Cape 

Reflective strip, high visibility colour. 

Attaches to fleece liner. 

Material meets EN 471 specification 


Manufacturer’s code: S50HVYFC 

Code: 271432 


Manufacturer’s code: S50HVOFC 

Code: 271430 

Centurion ® Helmet Face Warmer 

Offers versatile protection against extreme 

adverse weather conditions. Fits to Helmet Frost 

Cape for total head protection 


Manufacturer’s code: S50FW 

Code: 271431

Bump Cap Protection 

Breathability 

• High levels of ventilation 


Putting safety 

at the 

top. 

Get light-duty head protection 

with 3M First Base + Bump Caps. 

Contact us for more information. 

Comfort 

• Compressed closed 

cell foam 

• Wide and absorbent terry 

towelling sweatband 

Peak 

• Low profile design 

• Machine washable 

Unique size adjustments 

• Improves security 

of the cap 

3M First Base 3 Bump Caps 

The 3M First Base 3 Bump caps covers a wide 

range of needs and applications, from high visibility with 

reflectives, to warm winter lined versions, advanced 

ventilation or extra impact protection. These bump caps 

protect the wearer from light contact with stationary 

objects. Various peak lengths and colours are available 

Colour: Black – Reduced Peak 


Colour: Navy Blue – Reduced Peak 


Colour: Red – Reduced Peak 


Centurion AirPro SecurePlus 

Baseball Bump Cap 

APPROVED TO EN 812 

A baseball bump cap designed to provide unrivalled 

head retention and wearer comfort. The first ever 

baseball bump cap to incorporate Centurion’s patentpending 

ratchet adjustment system. New design for 

optimal ventilation and shape. Reduced peak (30mm) 

and Designed for maximum breathability. Corporate 

badging via embroidery or transfer print 

Manufacturer’s code: S38NBRPR 

Colour: Navy 

Code: 279811 

Manufacturer’s code: S38KRPR 

Colour: Black 

Code: 279812 

Centurion Standard Peak Airpro 

Baseball Bump Cap Ref: S38 

Peak length 5cm. Lightweight head protection 

• Size: 54-62cm 

• Other colours are available 

Manufacturer’s code: S38NB 


Code: 279080 

Manufacturer’s code: S38K 

Colour: Black 

Code: 279801 

Centurion Standard Peak High Visibility 

Airpro Baseball Bump Cap Ref: S38 

Peak length 5cm. 

Lightweight head protection 

• Size: 54-62cm 

Manufacturer’s code: S38HVO 


Code: 279805 

Manufacturer’s code: S38HVY 


Code: 279806 

155

Hearing Protection 

Buying Guide 

LEGISLATION UPDATE: From 21st April 2018 hearing protection will be re-classified 

from Category II to Category III types of risk. New products placed on the market from 

this date will face even stricter tests for conformity and certification. 

Existing hearing protection can continue to be placed on the market under a Cat II EC 

Cert until 21st April 2019. After this date ALL hearing protection needs to be certified to 

Cat III under the regulation. 

Product already on the market (with distribution) can continue to be sold under either. 

As a responsible PPE supplier you can have confidence that our products will meet 

conformance to the existing and new standards as appropriate. 

Step 1. Detection 

When a noise survey is required, it must be carried out by 

a competent person such as a noise consultant. 

Step 2. Protection 

Use the information gained during the survey to select HPE 

with the right level of attenuation. 

Step 3. Education and training 

Not every member of your workforce will know all the 

benefits or understand how best to use their protection. 

Step 4. Validation 

Every user is different, how do you make the workforce 

is adequately, individually protected? 

Just because it fits, doesn’t mean it works 

There are many helmet manufacturers who produce ear muffs for use 

with their helmets. There are also many manufacturers that specialise 

in producing one or the other, and distributors will offer a range of 

both products to give you the best choice. If you select products from 

different sources, make sure you check that the ear muffs have been 

tested on the specific make and model of helmet with which you plan 

to use them. Manufacturers are well aware of the situation and many 

co-operate to have their products tested together, so that the customer 

can select the combination they prefer as the most appropriate. 

So, if you want to use an ear muff with a particular helmet, make 

sure they have been certified together. 

Remember, just because it fits, doesn’t mean it works. 

SNR 

39 

SNR (Single Number Rating). 

SNR is the number of potential decibels the hearing protection will 

reduce the noise level by, if fitted correctly. 

The aim is to find a suitable product that brings noise level down to between 70 and 

80 decibels. Over protection should also be avoided, as people may not be able to hear 

important every day sounds. SNR is only a general means of comparing different sound 

protection levels for different hearing protection. 

156 

Bristish Safety Industry Federation 

Most safety helmets have a facility, usually an accessory slot at each side, 

to allow them to be fitted with earmuffs and other accessories. Also, many 

manufacturers offer helmet mounted earmuffs specifically for the purpose. 

Often the fitting points of the helmet and earmuff are of a ‘standard’ size 

and style, but here a significant issue arises: 

If you select a helmet and earmuffs from the same manufacturer, it is likely that 

they have been approved for use together. The manufacturer in question should 

make this clear in the product information. If, however, you select a helmet from one 

manufacturer, and helmet mounted earmuffs from another, they may well fit together, 

but unless you can see that they have been performance tested together there is 

nothing to show the earmuffs will provide protection! 

One of the features determining the performance of earmuffs is the force produced by 

the spring arm. This is to maintain the seal of the cushion around your ear. 

You may have selected the most suitable helmet for you or your workforce, and also 

the most appropriate earmuff for the noise hazard, also taking into account weight, 

comfort, user acceptance, etc, but without testing for use in combination you cannot 

assume that the earmuff will provide the expected protection. 

Both the helmet and the earmuffs should be CE marked. This mark shows that a 

product meets the necessary legal requirements however it does not tell you anything 

about its performance for any given application or task. 

There are different ways to gain the CE mark but the most common is to have a 

product certified using a harmonised European standard (see ‘CE Marking and Product 

Certification’ below). For helmet mounted earmuffs the standard is EN352‐3, and it 

requires products to be tested together and manufacturers to specify the models of 

helmet tested with the earmuffs. 

RNR*



157


Foam Ear Plugs 

SNR 

39 

3M E-A-Rsoft 

FX Foam Ear Plugs 

CONFORMS TO EN 352-2 H=39 M=36 L=34 SNR=39 

Flanged shape – assists ease of insertion. 

Smooth tapered finish – enhances comfort. 

High attenuation at 39dB 


Uncorded 

Code: 254440 Manufacturer’s code: ES.01.020 Box of 200 pairs 

Corded 


SNR 

37 

3M 1100 Foam Ear Plugs 


Soft, hypo-allergenic polyurethane foam. Smooth, dirt resistant surface. 

Tapered design fits most ear canals. Maximum comfort 


Uncorded 

Code: 254291 Manufacturer’s code: 1100 Box of 200 Pairs 

Corded 


SNR 

37 

158 

Howard Leight Foam Ear Plugs 


Designed for improved fit and attenuation 


Uncorded, Max-1 

Code: 254071 Manufacturer’s code: 3301161 Box of 200 pairs 

Corded, Max-30 

Code: 254072 Manufacturer’s code: 3301130 Box of 100 pairs


SNR 

28 


3M E-A-R Classic Foam Ear Plugs 


Soft, energy absorbing polymer foam. Excellent hearing 

protection. All-day comfort 


Manufacturer’s code: PP.01.002 

Code: 254248 

Box of 250 pairs 

SNR 

38 

3M E-A-R Push-Ins Foam Ear Plugs 


Insertion stem ensures quick, easy fitting (no roll down). 

Optimal protection at 38dB. Soft, pliable foam body – maximum comfort, seal 

• Colour: Blue stem, Yellow plug 

Uncorded 

Code: 254443 Manufacturer’s code: EX.01.021 Box of 100 Pairs 

Corded 

Code: 254444 Manufacturer’s code: EX.01.020 Box of 100 Pairs 

SNR 

35 

SNR 

22 

Moldex Spark Plug Ear Plugs 7800 

CONFORMS TO EN 352 H= 34 M=32 L=31 SNR=35 

Comfortable PU earplugs suited to protect against long-term exposure. Contoured 

shape. Colourful & appealing. Comfortable and soft material. Easy to insert 

Code: 254249 Manufacturer’s code: 7800 Box of 200 Pairs Each 

Moldex Mellows Ear Plugs 7600 

CONFORMS TO EN 352 H=26 M=18 L=12 SNR=22 

Comfortable PU earplugs suited to protect against long-term exposure. For 

protection against lower noise levels. Designed to keep you in touch with your 

environment. Comfortable and soft material. Easy to insert 

Code: 431341 Manufacturer’s code: 7600 Box of 200 Pairs Each 

159



NEW 

uvex xact-fit reusable 

Using earplugs has never been easier 

The unique left and right plug fitting of the uvex xact-fit ensures correct insertion, optimum fit 

and protection every time. The smooth, dirt-repellent surface can be easily cleaned using mild 

soap and water. Available in two sizes with size small being suitable for those with smaller ear 

canals or new to wearing hearing protection. 

The oval shape of the 

plug mimics the ear canal, 

for enhanced comfort 

and a low pressure fit. 

The stem is shaped to 

fit either the left or right 

ear as indicated which 

ensures correct insertion. 

Thanks to an adjustable 

cord, they can be worn 

comfortably around the 

neck. 

uvex xact-fit reusable S 

Product code 2124019 

SNR 

26dB 

uvex xact-fit reusable M/L 

Product code 2124020 

SNR 

26dB 


SNR 

26 

SNR 

26 

uvex xact-fit 

SNR 26 dB. The easiest plug to fit giving accurate 

fitting every time. Tapered plug shape fits natural shape 

of the ear canal for easy, comfortable secure fitting. Ergonomic stem marked left 

and right with thumb indentations for easy fitting. Left and right fitting ensures 

consistently accurate insertion and therefore, optimum protection. Adjustable neck 

cord. Low pressure, sealed PU foam reduces the potential for contamination. 

Replacement pods help prolong the life of the product 

• Colour: Lime 

• Corded 

Code: 431955 

Manufacturer’s code: 2124-001 Box 50 pairs, paired in minibox 

uvex xact-fit replacement earplugs 


Code: 431431 

Box 250 pairs, 5 pairs per mini box 

uvex x-fit 

SNR 37 dB. Disposable foam ear plug. Tapered shape that fits the natural shape 

of the ear canal. X emboss helps reduce pressure on the ear canal due to there 

being less material. Also aids easy and hygienic removal after use. Low pressure 

sealed PU foam, reduces the potential for contamination and gently expands to fit 

the size and shape of the ear canal. Compatible with other items of PPE 


Uncorded Manufacturer’s code: 2112-001 

Code: 431432 

Corded Manufacturer’s code: 2112-010 

Code: 431433 Box 100 

200 pairs, bagged in pairs 

SNR 

37 

160


SNR 

36 

SNR 

29 


3M E-A-R E·A·Rsoft Yellow Foam Ear Plugs 


PU polyurethane foam. Ultimate in comfort and protection 


Uncorded 


Corded 


3M E-A-R Classic Corded Foam Ear Plugs 


Classic ear plugs with easy-to-see blue vinyl cord. Particularly suitable for use in 

manufacturing and process industries 


Code: 254239 Manufacturer’s code: CC.01.000 Box of 200 pairs 

Howard Leight LL1 Laser Lite ® Foam Ear Plugs 


• Self adjusting foam – expands to fit virtually every wearer 

• Contoured T-shape – easy insertion and wear 

• Vibrant colours – visible protection 

• Colour: Pink/Yellow 

Uncorded 


Corded 


SNR 

35 

161


Moulded Ear Plugs 

SNR 

30 

SNR 

32 

SNR 

27 

Howard Leight Smart Fit Moulded 

Re-usable Corded Ear Plugs 


Revolution in comfort and individual fit. Advanced 

material – uses body heat to adapt to ear canal. Unique 

detachable cord, smart HearPak pocket case 



Code: 254094 

Box of 50 Pairs 

3M E-A-R Ultrafit Moulded Reusable 

Corded Ear Plugs 


Unique one-size, fits most ear canals comfortably. 

High attenuation 


Manufacturer’s code: UF.01.020 

Code: 254090 


uvex whisper + 

SNR 27 dB. Reusable, pre-shaped plug, no 

need to touch the part that goes into the ear for 

reduced risk of contamination and increased 

hygiene. Tapered smooth fins which fit the 

natural shape of the ear canal. Comfortable skin 

contact. Reduced pressure for long term wear. 

Comes with hygiene box for storage when not in 

use. Can be washed and stored for repeated use 


• Corded 


Code: 431434 


SNR 

30 

SNR 

20 

162 

Moldex Rocket Reuseable Corded Ear Plugs 


Suitable to protect against long term exposure. Reuseable and washable. 

Solid handle for easy insertion 

• Colour: Purple/Lime 


3M E-A-R Ultrafit 20 Moulded Re-usable 

Corded Ear Plugs 


Extra attenuation. Correctly matched to noise level, allows conversation to be heard. 

Washable up to 50 times 


Code: 254091 Manufacturer’s code: UF.01.012 Box of 50 Pairs

Detectable Ear Plugs 

Available in either foam or moulded finish and fitted using detectable components – either a steel ball bearing or 

non-ferrous filter, with non-food blue cord - making them ideal for use in food industries. 

Foam ear plugs are usually disposable, while moulded ones are reusable. 

SNR 

36 


SNR 

24 

3M E-A-R Soft Detectable Foam Ear Plugs 


Smooth shape - comfortable insertion. High attenuation. 

Fully detectable cord, integral stainless steel ball 


Manufacturer’s code: ES.01.011A 

Code: 254207 


uvex Hi-Com 

Detectable Corded Plugs 

APPROVED TO: EN352-2. COMPLIES WITH ISO 9001 

SNR 24. Blue coloured cord and plug for increased visibility and security 

against contamination. Metal ferrules and powder in cord for full detection 

even if the cord is shredded. Low, flat attenuating earplug allowing for 

excellent speech and sound recognition has been scientifically designed to 

also absorb more inner-ear sounds which can be experienced when wearing 

hearing protection in quieter areas 



Code: 254205 

100 pairs. Bagged in pairs 

SNR 

35 

SNR 

32 

SNR 

30 

Howard Leight Laser Trak 

Detectable Foam Ear Plugs 


Ideal for hygiene sensitive environments. 

Non-ferrous metal safety component. 

Traced visually or by metal detection 

• Colour: Orange/Blue 

3M E-A-R Tracer 

Detectable Moulded Ear Plugs 


Unique one-size comfortably fits most ear canals. 

High attenuation 


Howard Leight Smart Fit 

Detectable Moulded Ear Plugs 

CONFORMS TO EN 352-2 H=32 M=27 L=23 SNR= 30 

Advanced material - uses body heat to adapt to ear 

canal. Shapes to the users ear canal. Increases user 

acceptance and compliance 



Code: 254348 

Pack of 100 pairs 

Manufacturer’s code: TR.01.000 

Code: 254092 



Code: 254095 


163


Foam Ear Plug Dispensing Systems 

An ideal solution for where the noise level is greater than 85 decibels and hearing protection is required all the time, 

these can be positioned at the point of entry, helping to enforce employee usage of hearing protection. 

Beating the elements 

The innovative design protects 

against sun, rain and wind 

Easy to know when to refill 

The level monitor is front and 

centre, ensuring you won't run short 

Convenient workforce access 

It has the flexibility to be used 

freestanding or secured to a wall 

Accurate dispensing 

A simple twist accurately and 

consistently dispenses one 

earplug at a time 

SNR 

36 

3M E-A-R E·A·Rsoft 

Yellow Neons Foam 

Ear Plugs Refill Bottle 



Code: 254277 Manufacturer’s code: PD.01.002 Refill of 500 pairs 

3M E-A-R One Touch 

Pro Industrial Dispenser 

Accurately dispenses one earplug at 

a time. Specifically designed for tough 

environments and repeated use. 

Flexibility to be used free-standing or 

secured easily to a wall. Stock level visible 

through clear refill bottle. 500 pairs per recyclable refill bottle (sold separately) 

Code: 254301 Manufacturer’s code: 391-0000 Each 

SNR 

28 

3M E-A-R 

Classic Foam 

Ear Plugs Refill Bottle 



Code: 254276 Manufacturer’s code: P.D.01.001 Refill of 500 pairs 

SNR 

37 

SNR 35 

Howard Leight LS500 Leight 

Source Dispenser 

Highly visible. Easy to use. Bulk fill facility – 

saves time, packaging waste. Dispenses MAX 

and Laser Lite refill packs - (see below) 

Code: 254361 Manufacturer’s code: 3301273 Each 

MAX-ID Foam Ear Plug Refill Pack for LS500 Dispenser 


Code: 254080 Manufacturer’s code: 3301165 Pack of 500 pairs 

LL-ID Laser Lite Foam Ear Plug Refill Pack 

for LS500 Dispenser 


Code: 254342 Manufacturer’s code: 3301271 Pack of 500 pairs 

164

Foam Ear Plug Dispensing Systems 

SNR 

35 

SNR 

35 

SNR 

37 


SNR 

24 

Moldex Large Spark Plug Station 7850 


Ear plug dispensing system - available in two sizes. 

Plugs remain hygienic. Dispenser mechanism is 

replaced automatically. Mounting bracket available 

separately. Ear plugs are made from soft material that is 

easy to insert 


Code: 254297 

SNR 

22 

Contains 500 pairs 

Moldex Small Spark Plug Station 7825 





separately. Ear plugs are made from soft material that is 

easy to insert 


Code: 014135 

Moldex Mounting Bracket 

for all Moldex Stations 

Wall mount for all Moldex Stations 


SNR 

22 


uvex Ear Plug Dispenser 

(unfilled) 

Holds 600 pairs of uncorded earplugs. Simple 

click mechanism prevents over supply of plugs. 

Can easily be located in communal areas 


Code: 254035 

Moldex Large Melows Station 7650 





separately. Ear plugs are made from soft material 

that is easy to insert 


Code: 430304 


Moldex Small Melows Station 7625 





separately. Ear plugs are made from soft material 

that is easy to insert 


Code: 431344 


uvex x-fit Ear 

Refill Box 300 pairs SNR 37 


Code: 254036 

uvex hi-com 

Refil Box 300 pairs SNR 24 


Code: 254345 

165


Banded Semi-Aural Ear Plugs 

Finished in either a foam or moulded tip, these are ideal for intermittent use, being easy to 

put on or take off or simply store around the neck. Providing less protection than plugs or 

ear muffs, they are not usually recommended for continuous long-term wearing. 

To insert, reach around the back of your head and pull outward and upward on the ear. 

Using the large ends of the pods, swivel them to direct the tips into the ear canal opening. 

Firmly push and wiggle the pods into the canals until a snug seal is obtained. 

SNR 

26 

SNR 

23 

3M 1310 Banded 

Semi-Aural Ear Plugs 


Innovative flexible band. Soft round foam plugs. Optimum fit, superior comfort 





Moldex Jazz-Band Banded Ear Plugs 


Cost effective convenient option against intermittent noise. Very low band pressure for 

extra comfort. Neck cord with safety release mechanism. Comes with a spare pair of 

replacement pods. Replacement pods available separately 


Code: 430295 

Pair 

SNR 

27 

SNR 

23 

166 

Moldex WaveBand 1K 

Banded Ear Plugs 


Cost effective convenient option against intermittent noise. Very low band pressure 

for extra comfort. Worn under the chin, keeping it away from the wearers body and 

clothing. Replacement pods available separately 


Code: 431343 

Pair 

3M E-A-R Caps 

Banded Semi-Aural Ear Plugs 


One of the lightest semi-aural hearing devices. Day-long protection. 

Ideal disposable protectors for visitors 



Manufacturer’s code: EC01000 


Spare caps 

Manufacturer’s code: ES01301 

Code: 254992 

Pack of 50 Pairs

Moldex M Series Ear Muffs 

Moldex ear muffs are extremely comfortable and are made to 

resist even the most extreme conditions. A focus on design 

makes the ear muffs easy to use and look great. 

SNR 

30 

SNR 

27 

The M-series ear muffs are high quality material with a 

seamless workmanship to make these ear muffs robust and 

durable. Extremely soft foam air cushions as well as low 

contact pressure ensure high wearer comfort. 

SNR 

30 

KeepSAFE Ear Muffs 


SNR 

27 

SNR 

26 

Moldex M-Series 

6110 M4 Ear Muffs 

CONFORMS TO EN 352-1 

H=34 M=27 L=20 SNR=30 

Robust headband retains shape. Ribbed 

air cushions for cool comfort. Flexible 

and lightweight. Viscoelastic foam 

cushions - better pressure distribution for 

more comfort. Extra wide ear space 






H=39 M=31 L=23 SNR=27 








AlphaSota Ear Muffs 

AlphaSota L1 Ear Defenders 

APPROVED TO EN352-1:2002 

SNR 19. Very low attenuation ideal for protection at the first action 

level. Blue in colour making them ideal for food environment 


AlphaSota M2 Ear Defenders 


SNR 30. A high performance, comfortable ear defender 

without the weight. Full integration with other PPE 

SNR 

19 

SNR 

30 





H=39 M=32 L=25 SNR=30 








KeepSAFE Blue Cyclone 

Ear Muffs 

CONFORMS TO EN 352-1 OVER THE 

HEAD H=33 M=25 L=17 SNR=27 

BEHIND THE HEAD H=31 M=23 

L=16 SNR=26 

Acoustic foam fill – good, 

effective protection across 

wide range of frequencies. 

For manufacturing industries, 

agriculture, construction sites, 

food industry, engineering. 

Figures for behind-the-head 

wearing are available on request 




SNR 

32 

SNR 

32 

SNR 

34 

AlphaSota F3 

Ear Defenders 


SNR 32. Full integration with other PPE. Easy fold for 

convenient storage. Metal free design making 

it ideal for food applications 


AlphaSota N4 

Ear Defenders 


SNR 32. Full integration with other PPE. 

Maintains performance when using with safety helmets 


AlphaSota H5 

Ear Defenders 


SNR 34. A high performance, comfortable ear defender 

without the weight. Stylish orange and black design. Full 

integration with other PPE 


167


3M PELTOR Hearing Protection 

and Communication Headsets 

Smart soloutions, easy communication 

3M PELTOR WorkTunes Pro headset 

32 dB, black, headband 

The 3M PELTOR WorkTunes Pro headset helps protect you 

from potentially harmful workplace noise while at the same time 

enjoy listening to the built in AM/FM radio. The built-in antenna, 

fast digital tuning and ability to store stations makes the hearing 

protector flexible and easy to work with. 

Code: 254315 

3M PELTOR ProTac III headset 

32 dB, black, headband 

3M PELTOR ProTac III headset helps protect against harmful 

noise, whilst allowing ambient sounds to be heard at a level 

below 82dB. It increases your ability to communicate with nearby 

colleagues, as well as hearing warning signals, approaching 

vehicles, or sounds in machines and processes. 

Code: 254316 

AM/ 

FM 

Built-in 

AM/FM 

radio 

External 

audio 

input 

Situational 

awareness 

External 

audio 

input 

3M PELTOR LiteCom headset 

32 dB, PMR 446 MHz, headband 

Communicating in noisy environments has never been easier – 

or safer. The PELTOR LiteCom headset is a tough and rugged 

headset designed to cope with demanding use in many different 

working environments. The cord-free two-way radio allows a 

two-way conversation on up to 8 channels, 38 subchannels, and 

has a range of up to 3,000 metres. It lets you talk hands-free and 

work safely regardless of harmful noise levels. 

Code: 254358 

Built-in 

two-way 

radio 

3M PELTOR Wireless Communication Accessory 

For PELTOR X Series ear defenders 

Make the smart choice and protect your hearing without 

sacrificing communication on the job site. With the 3M PELTOR 

Wireless Communication Accessory, you can keep working - and 

communicating - in loud settings. Featuring a noise-cancelling 

microphone, it instantly turns your PELTOR X Series ear defenders 

into a Bluetooth ® headset for use in noisy environments, so you can 

make calls while you work. 

Code: 254376 

Bluetooth 

Hearing 

protection 

Situational 

awareness 

Built-in 

two-way radio 

Bluetooth ® 

Built-in 

AM/FM radio 

External 

audio input 

Two-way 

external radio 

3M PELTOR 

WorkTunes 

Pro Headset 

Hearing protection that rocks! 

3M PELTOR 

ProTac III Headset 

Just what you want to hear 

3M PELTOR Wireless 

Communication 

Accessory 

Stay in the zone while 

on the phone 

3M PELTOR 

LiteCom Headset 

Walk the walk and talk the talk 

3M PELTOR 

LiteCom Plus Headset 

The ultimate in hearing protection 

Situational 

awareness 

Built-in 

two-way 

radio 

Bluetooth 

AM/ 

FM 

Built-in 

AM/FM 

radio 

External 

audio 

input 

Two-way 

external 

radio 

168 

Be aware of your surroundings 

without the need to remove 

your hearing protection 

Talk hands-free and 

work safely with the 

built-in two-way radio 

Wireless connection 

to your mobile phone 

or communication radio 

Listen to the built-in 

AM-FM radio whilst still 

protecting your hearing 

Connect to your mobile 

phone or similar device 

with the 3.5mm jack 

Talk hands-free and work safely 

with two-way external radio

3M PELTOR Optime I Premium Ear Muffs 

Versatile, lightweight protection. Low profile, generous inside depth – comfortable to wear. Easy teaming with other equipment. 

SNR 

27 

SNR 

26 


3M PELTOR Optime I H510A Headband Ear Muffs 




Manufacturer’s code: H510A-401-GU 

Code: 254136 

Pair 

3M PELTOR Optime I H510B Neckband Ear Muffs 




Manufacturer’s code: H510B-403-GU 


3M PELTOR Optime III Premium Ear Muffs 

For use in extremely noisy environments. Minimises resonance in the holder casings. Maximum high-frequency attenuation 

SNR 

35 

SNR 

35 

3M PELTOR Optime III H540A Headband Ear Muffs 




Code: 254335 Manufacturer’s code: H540A-411-SV Pair 

3M PELTOR Optime III H540B Neckband Ear Muffs 




Code: 254330 Manufacturer’s code: H540B-412-SV Pair 

169


3M PELTOR X Series Ear Muffs 

A new standard in Design, Comfort and Protection 

Protected wire head-band, building on the successful 3M Optime range. Lightweight dual moulded cups - 

maximum space inside helps minimise heat an moisture build-up. Integrated design for increased robustness. 

Colour-code easy recognition on site. Electrically insulated headband. Easy to clean. 

SNR 

37 

SNR 

33 

SNR 

33 

3M PELTOR X5A Ear Defenders Headband 


H= 37, M = 35, L = 27 SNR= 37 

• For extremely high noise levels, E.g. Quarrying 




3M PELTOR X4A 

Ear Muffs 


H= 36, M = 30, L = 22 SNR= 33 

• For high noise levels, ultra slim/ 

lightweight design 

• Colour: Bright Green 

Manufacturer’s code: XA007706931 

Code: 254153 

Pair 

3M PELTOR X3A 

Ear Muffs 


H= 35, M = 30, L = 25 SNR= 33 

• For high noise levels, 

E.g. Heavy engineering 




3M PELTOR X2A 

Ear Muffs 


H= 34, M = 29, L = 20 SNR= 31 

• For moderate to high noise levels, 

E.g. Construction 


SNR 

31 



3M PELTOR X1A 

Ear Muffs 


H= 32, M = 24, L = 16 SNR= 27 

• For light industry noise, 

E.g. Grounds maintenance 


SNR 

27 



SNR 

32 

SNR 

30 

SNR 

26 

3M PELTOR X4P3 Ear Muffs 




H= 36, M = 30, L = 21 SNR= 32 

• For high industry noise levels, 

E.g. Construction 

• Colour: Bright green 


H= 33, M = 28, L = 19 SNR= 30 

• For high industry noise levels, 

E.g. Heavy engineering 



H= 30, M = 23, L = 15 SNR= 26 

• For light industry noise levels, 

E.g. Pharmaceutical 



Code: 254157 

Pair 


Code: 254012 

Pair 


Code: 254013 

Pair 

170

3M Hearing Solutions 

3M PELTOR Wireless 

Communication Accessory 

Designed for X Series Earmuffs 

Protected 

meets connected. 

3M PELTOR Wireless Communication 

Accessory 

Instantly turn your 3M PELTOR X Series Earmuffs 

into a wireless communications device for use in noisy 

environments. It’s hearing protection and hands-free 

communication without compromise – that’s how X Series 

works smarter. 

Simply remove 

ear cushion and 

snap into place. 

www.3M.co.uk/ 

PELTORXWireless 

Code 254376 

Works with most 3M PELTOR X Series Earmuffs. 

X Series 

WORKS SMARTER

Workplace Safety Equipment 

Buying Guide 

Managing and Selecting Equipment 

The work at height regulations 2005 sets out a heirarchy of controls that employers are required to 

follow when selecting the appropriate measures to protect those working at height. 

Employer’s and those in control of any working at height activities, must ensure work is properly 

planned and supervised. This includes using the correct type of equipment for working at height. 

Low risk tasks that are relatively straight forward will be less challenging, when it comes to planning. 

Employer’s and those in control must assess the risks first before carrying out any work. 

Employer’s must: 

• Take a sensible, practical approach when considering equipment for work at height 

• Factors to weigh up include; The work to be undertaken, the working environment, 

access and egress, the height of the task, the duration and frequency and the condition 

of the surface being worked on 

There will also be certain low-risk situations where common sense tells you no particular 

precaution is necessary. 

How Do You Select The Right Equipment? 

When selecting equipment for work at height, employers must: 

• Provide the most suitable equipment appropriate for the work 

• Take account of factors such as the working conditions, the nature, frequency and duration 

of the work 

If you are unsure which type of equipment to use, once you have considered the risks, 

please contact our sales team who will be happy to help. 


Fall from height remains one of the most 

common causes of serious injury and death 

in the industry today. This fact, coupled with 

tightening regulations governing working at 

height, results in a greater need to consider 

how to protect those exposed to potential 

injury from a fall. 

How To Make Sure The Equipment Is In Good Condition? 

Work equipment, for example scaffolding, needs to be assembled or installed according to the 

manufacturer’s instructions and in keeping with the industry guidelines. 

Where the safety of the work equipment depends on how it has been installed or assembled, an 

employer should ensure it is not used until it has been inspected in that position by a competent 

person. A competent person is someone who has the necessary skills, experience and knowledge 

to manage health and safety. 

Inspection should be carried out at regular intervals as required and every time something happens 

that may affect the safety and stability of the equipment, eg adverse weather. 

172



173


Safety Harness 

3M DBI-SALA ® 

Delta II Work Positioning 

3-Point Safety Harness 


• 1112906 Innovative torso 

adjusters have simple, fast 

adjustment that eliminates 

loose ends and locks into place, 

preventing slippage 

• Side work positioning attachment 

points, padded work positioning 

belt, stand-up rear D-ring 

• Fast, easy donning – Delta 

no-tangle design, pass-thru 

buckle, non-slip leg straps, 

adjustable cheststrap 

• Durability – polyester waterresistant 

webbing, coated 

hardware for corrosion resistance 

• To work with positioning safety 

lanyard 

(code 801210) 

• Colour: Yellow/Blue 

Code: 258029 


Exofit Nex 2-Point 



• 1113901 Superior X design and 

revolutionary technology – 

Duo-Lok quick connect buckles, 

Tech-lite aluminium D-rings 

• Moulded lanyard keepers, 

stand-up dorsal ring 

• Integrated suspension relief 

straps, rigid shoulder straps, 

ultra-soft edging 

• Impact indicators, 

reflective material 

• Colour: Blue/Grey 

Code: 258012 


Delta 2-Point 








• Front and stand-up rear D-ring 



buckle, non-slip leg straps 




• Colour: Blue/Yellow 

Code: 258032 


Delta 1-Point 








• Stand-up rear D-ring 



buckle, non-slip leg straps, 

adjustable chest strap 




• Colour: Blue/Yellow 

Code: 258030 

174

Fall Arrest Accessories 


3M DBI-SALA ® Twintail Safety 

Lanyard with Scaffold Hook 


• 1245534 Shock absorbing expander 

twintail lanyard 

• Two 60mm gate scaffold hooks. 

Ideal for when traversing structures 

• Length: 2m 


Code: 258015 

3M Protecta ® First Work Positioning 

Adjustable Rope Lanyard 


• AL4000 Braided 10.5mm rope 

• Slip buckle – to adjust to desired length 

• Supplied without connectors 

• Size: 1.8m 

Code: 258077 

3M Restraint Rope Lanyard 


• AL410C 10.5mm dia polyamide white 

braided rope 

• Thermo sleeves, easy to view tear indicator thread 

• Supplied without connectors 

Size: 1m 

Code: 801048 

AL415C Size: 1.5m 

Code: 801050 

3M Screw Gate 

Steel Karabiner 


KJ5107 Manual-locking karabiner hook 

• 20mm gate opening 

Code: 252020 

3M Automatic Locking Steel 

Karabiner 


KJ5108 Automatic locking and rope retaining pin 

• 50mm gate opening 

Code: 252202 

3M Protecta ® Rebel 

Retractable Lifeline 


• 3590521 New generation 

of self-retracting fall arresters 

• Fall indicator integrated into 

lifeline connector 

• Reduces force of impact 

and stopping distance 

• Use either vertically or horizontally 

(with AM402G sling) 

• Unbeatable weight/length ratio 

Size: 10m. Weight: 4.5kg 

Code: 258076 

3590520 Size: 6m. Weight: 4.2kg 

Code: 258055 

3M Protecta ® Rebel 

Self-Retracting Lifeline 


• 3100418 New generation of selfretracting 

fall arresters 

• Top swivel limits lifeline twisting 

• Tough nylon housing, lightweight, 

compact and durable 

• High strength polyester webbing for 

added durability and longevity 

• Heat-shrunk clear PVC coating on 

shock pack for ease of use and 

visual inspection 

• Small opening snap hook and big 

opening scaffold hook 

• Length: 2m 

• Weight: 1.2kg 

Code: 258067 

175

Washroom & Cleaning 

ESSENTIAL OCCUPATIONAL SKIN CARE 

TAILORED TO YOUR WORKPLACE 

By implementing skin care best practice you can: 

Maintain 

healthy skin 

Reduce the risk of 

occupational skin disease 

Help stop the spread 

of germs 

Help reduce 

sickness 

PROTECT 

PRE-WORK CREAMS: 

• Form a protective layer on the skin 

• Help to prevent the penetration of 

contaminants 

• Make skin easier to clean 

CLEANSE 

HAND WASHING: 

• Removes harmful contaminants and irritants 

• Helps prevent the spread of germs 

• Keeps skin in a healthy condition 

SANITISE 

HAND SANITISERS: 

• Kill germs 

• Do not require the use of water 

• Provide a higher level of hand hygiene 

and skin disinfection 

RESTORE 

AFTER WORK CREAMS: 

• Help maintain the skin in a healthy condition 

• Keep skin soft and supple avoiding dryness 

• Help prevent occupational dermatitis 

TO FIND OUT MORE VISIT www.scjp.com 

176



177


SKIN PROTECT 

PROTECT 

Pre-work protection creams help protect 

the skin from contact with various 

workplace contaminants, irritants and 

working conditions. They form a protective 

layer to help prevent the penetration of 

contaminants and make skin easier to clean. 

Stokoderm ® Sun Protect 50 PURE 

Perfume-free and water resistant SPF50 sunscreen for 

professional use to protect the skin against harmful UVA, 

UVB and UVC rays. Absorbs quickly with a non-greasy 

after-feel 

SPC100ML - Size:100ml tube 

MOQ Case of 12 

Code: 548345 

SPC1L - Size: 1L Cartridge 

MOQ Case of 6 

Code: 548361 

Sun Protect 1L Dispenser 

Unique 1 litre sealed cartridge dispenser for exclusive 

use with genuine SC Johnson Professional refill 

cartridges only. Delivers the exact amount of product 

required, controlling usage and reducing waste. The 

push button is protected by BioCote ® , a silver-based 

antimicrobial agent that inhibits the growth of bacteria 

and molds. Size (mm): 233H x 130W x 115D 

• SUN1LDSEN - Size: 1L Dispenser 

• Packed in: Each 

Code: 548259 

UV Skin Safety Centre Board 

Help to protect your workforce from UV radiation by 

raising awareness of the dangers of working in the sun 

with the all in one Sun Protect Skin Safety Centre. 

Pre-assembled with: Sun Protect 1 litre lockable 

dispenser, a mirror for easy application, a colour wheel 

to display the daily local UV index level, and instructions 

of WHY and WHEN outdoor workers need to protect 

themselves from the sun 

• SSCSUN1EN - Size: 583 x 412 x 142mm 


Code: 548264 

Stokoderm ® Universal PURE 

Universal, perfume-free and dye-free skin 

protection cream to protect against oil-based 

and water-based substances (such as oil, 

grease, lubricants and detergents). 

Suitable for glove use 

SGP100ML - Size: 100ml tube 


Code: 431564 

SGP1L - Size: 1L cartridge 

MOQ Case of 6 

Code: 431565 

Stokoderm ® Protect PURE 

Universal, perfume-free skin protection cream 

to help protect the skin against light to moderate 

exposure to water and non-water based 

workplace substances, such as oil, grease, 

lubricants and detergents. Quick drying 

and non tacky. Suitable for use in food 

production areas and with gloves 

UPW100ML - Size: 100ml tube 


Code: 548314 

UPW1L - Size: 1L cartridge 

MOQ Case of 6 

Code: 548316 

178 

Travabon ® Classic 

Specialist skin protection cream to protect hands against heavy 

exposure to oil-based substances (such as solvents, metal-working 

oils and mechanical soiling) and to facilitate skin cleaning 

TVC100ML - Size: 100ml bottle 


Code: 431562 

Protect 1L Dispenser 

Unique 1 litre sealed cartridge dispenser for exclusive use 

with genuine SC Johnson Professional refill cartridges only. 

Delivers the exact amount of product required, controlling 

usage and reducing waste. The push button is protected 

by BioCote ® , a silver-based antimicrobial agent that inhibits 

the growth of bacteria and molds. 

Size (mm): 233H x 130W x 115D 

• PRO1LDSEN - Size: 1L dispenser 


Code: 548384

CLEANSE WASHROOM 


Clear FOAM 

Perfume-free and dye-free gentle foam hand wash with 

added moisturisers. Proven to remove 99% of dirt and 

germs. Skin hypoallergenic and suitable for those with 

sensitive skin. Designed for all ages. Biodegradable 

formulation EU Ecolabel certified* 

CLR1L - Size 1L cartridge 

MOQ Case of 6 

Code: 548964 

Azure FOAM 

Mild and gentle foam hand wash, perfumed with the 

unique signature fragrance, Crisp Fruit. Proven to 

remove 99% of dirt and germs, it's dermatologically 

tested and designed for all ages. It is suitable for 

sensitive skin and contains added moisturisers. 

Biodegradable formulation EU Ecolabel certified* 

AZU1L - Size: 1L cartridge 

MOQ Case of 6 

Code: 548962 

AZU2LT- Size: 2L cartridge 

MOQ Case of 4 

Code: 548963 

Refresh Relax FOAM 

Luxurious rich foam hand wash with a relaxing 

cedarwood and patchouli fragrance. Contains 

moisturisers to help prevent skin drying. For use in any 

washroom in offices and public facilities 

RLX1L - Size: 1L cartridge 

MOQ Case of 6 

Code: 519259 

Refresh Energie FOAM 

Luxurious rich foam hand wash with an energising 

citrus and spice fragrance. Contains moisturisers to help 

prevent skin drying. For use in any washroom in offices 

and public facilities 

ENG1L - Size: 1L cartridge 

MOQ Case of 6 

Code: 519260 

Cleanse Washroom 1L and 2L Dispensers 

Unique range of 1 litre and 2 litre sealed cartridge dispensers 

for exclusive use with genuine SC Johnson Professional refill 

cartridges only. Delivers the exact amount of product required, 

controlling usage and reducing waste. The push buttons are 

protected by BioCote ® , a silver-based antimicrobial agent 

that inhibits the growth of bacteria and molds 

WRM1LDSEN - 1L dispenser 

Size (mm): 233H x 130W x 115D 

Packed in: Each 

Code: 548946 

Also Available - 2L dispenser 

Size (mm): 290H x 163W x 145D 

179


CLEANSE LIGHT 

SKIN CLEANSE – WORKPLACE 

Our hand cleansers have been developed to suit different work 

environments and contaminent types. Using the appropriate 

hand cleaner helps prevent occupational skin disorders and 

keeps skin in good condition. 

Estesol ® FX POWER 

FOAM 1L & 2L Cartridges 

Lightly fragranced, solvent-free POWER FOAM hand 

cleaner to remove general industrial dirt and grime. 

Specifically formulated to provide the efficiency 

benefits of foam and yet effectively remove industrial 

soilings. Twice as effective as normal washroom 

foam soaps. Skin hypoallergenic and clinically 

proven to care for the skin 

EFM1L - Size: 1L cartridge 

MOQ Case of 6 

Code: 548424 

EFM2LT - Size: 2L cartridge 

MOQ Case of 4 

Code: 548425 

Estesol ® FX PURE POWER 

FOAM 1L & 2L Cartridges 

Perfume-free and solvent-free POWER FOAM hand 

cleaner to remove general industrial dirt and grime and 

food related soilings. Specifically formulated to provide 

the efficiency benefits of foam and yet effectively 

remove industrial soilings. Twice as effective as normal 

washroom foam soaps. Skin hypoallergenic and clinically 

proven to care for the skin 

EPU1L - Size: 1L cartridge 

MOQ Case of 6 

Code: 548422 

EPU2LT - Size: 2L cartridge 

MOQ Case of 4 

Code: 548423 

Estesol ® FX PURE POWER 

FOAM 1L & 2L Dispensers 

Unique 1 litre and 2 litre sealed cartridge dispensers 

for exclusive use with genuine SC Johnson 

Professional refill cartridges only. The push buttons 

on all SC Johnson Professional ® dispensers are 

protected by BioCote ® , a silver-based antimicrobial 

agent that inhibits the growth of bacteria and molds. 

Delivers the exact amount of product required, 

controlling usage and reducing waste 

EFM1LDSEN - Size: 1L dispenser 

Size: (mm): 233H x 130W x 115D 

Code: 548420 

EFM2LDPEN - Size: 2L dispenser 

Size: (mm): 290H x 163W x 145D 

Code: 548421 



Estesol ® Lotion PURE 

Perfume-free and dye-free light 

duty lotion hand cleaner for 

regular use to remove general dirt 

and grime. Suitable for general industrial and food 

manufacturing/ processing environments. Contains 

moisturisers to help prevent skin drying. EU Ecolabel 

certified* 

PUW1L - Size: 1L cartridge 

MOQ Case of 6 

Code: 548975 Each £8.64 

PUW2LT - Size: 2L cartridge 

MOQ Case of 4 

Code: 548370 Each £9.77 

PUW4LTR - Size: 4L cartridge 

MOQ Case of 4 

Code: 548375 Each £18.43 

Estesol ® Hair & Body 

Light duty lotion hand cleaner to remove general 

industrial dirt and grime with a light, pleasant unisex 

fragrance. Contains moisturisers to help prevent skin 

drying. EU Ecolabel certified* 

HAB1L - Size: 1L cartridge MOQ Case of 6 

Code: 519271 

HAB2LT - Size: 2L cartridge MOQ Case of 4 

Code: 519274 

Estesol ® Lotion 

Light duty lotion hand 

cleaner to remove 

general industrial dirt 

and grime with a light, 

pleasant unisex fragrance. 

Contains moisturisers to 

help prevent skin drying. 

EU Ecolabel certified* 

LTW2LT - Size: 2L 

cartridge 

MOQ Case of 4 

Code: 548346 

Cleanse Light 1L, 2L and 4L Dispensers 

Unique range of 1 litre, 2 litre and 4 litre sealed cartridge 

dispensers for exclusive use with genuine SC Johnson 

Professional refill cartridges only. Delivers the exact amount 

of product required, controlling usage and reducing waste. 

The push buttons are protected by BioCote ® , a silver-based a 

ntimicrobial agent that inhibits the growth of bacteria and molds 

LGT1LDSEN - Size: 1L dispenser 

Code: 431856 

LGT2LDPEN - Size: 2L dispenser 

Code: 548371 

LGT4LDREN - Size: 4L dispenser 

Code: 548374 

Cleanse Shower 

1L and 2L Dispenser 

Unique 1 litre and 2 litre sealed cartridge dispensers 

for exclusive use with genuine SC Johnson Professional 

refill cartridges only. The push buttons on all SC Johnson 

Professional ® dispensers are protected by BioCote ® , 

a silver-based antimicrobial agent that inhibits the growth 

of bacteria and molds. Delivers the exact amount of 

product required, controlling usage and reducing waste 

SHW2LDPEN - Size: 2L dispenser 

Code: 548974 

Also Available - 1L dispenser 

Size: (mm): 233H x 130W x 115D 


Size: (mm): 290H x 163W x 145D 


Size: (mm): 345H x 175W x 150D 


Size: (mm): 290H x 163W x 145D 


Size: (mm): 233H x 130W x 115D 

180 

*This product is certified to have reduced environmental impact through its life cycle, from extraction of raw materials through to its production, use and disposal.

CLEANSE HEAVY 


Solopol ® GFX POWER FOAM 

Heavy duty gritty POWER FOAM hand cleaner with non-abrasive natural scrubbing agents. Lightly fragranced, 

solvent-free formulation delivers a rapid and powerful deep-clean to remove ingrained oil, grease, carbon black and 

lubricants. Tests confirm it is twice as effective as traditional heavy duty soaps and provides over 43% more hand 

washes. Suitable for sensitive skin and leaves hands feeling smooth and conditioned after use. EU Ecolabel certified* 

548412GPF3LEURO 

Size: 3.25L cartridge 

MOQ Case of 4 

Code: 548412 

GF3LDXEN - Size: 3.25L dispenser 

Size (mm): 345H x 175W x 165D 


Code: 548415 

Solopol ® 

Lightly fragranced solvent-free heavy 

duty hand cleansing paste with natural 

scrubbing agents, to efficiently remove 

ingrained oil, grease, carbon black and 

lubricants. Contains moisturisers to help 

prevent drying and leaves skin smooth 

after use. U Ecolabel certified* 

SOL2LT - Size: 2L cartridge 

MOQ Case of 4 

Code: 548293 

SOL4LTR - Size: 4L cartridge 

MOQ Case of 4 

Code: 012817 

Solopol ® Lime 

Solvent-free, heavy duty hand cleaner 

with natural cornmeal scrubbing agents 

and refreshing light lime fragrance. 

Removes oil, grease and general dirt and 

grime effectively and leaves skin feeling 

smooth 

LIM2LT - Size: 2L cartridge 

MOQ Case of 4 

Code: 548377 

LIM4LTR - Size: 4L cartridge 

MOQ Case of 4 

Code: 548378 

Kresto ® Citrus 

Heavy duty hand cleaner with natural 

scrubbing agents to remove deeply 

ingrained and difficult to remove soilings, 

such as most oil based paints, oil, grease 

and grime. With fresh citrus scent and 

conditioners it leaves the skin feeling 

refreshed and smooth 

CIT2LT - Size: 2L cartridge 

MOQ Carton of 4 

Code: 548376 

CIT4LTR - Size: 4L cartridge 

MOQ Case of 4 

Code: 548379 

Cleanse Heavy 

2L and 4L Dispensers 

Unique range of 2 litre and 4 litre sealed 

cartridge dispensers for exclusive use 

with genuine SC Johnson Professional 

refill cartridges only. Delivers the exact 

amount of product required, controlling 

usage and reducing waste. The push 

buttons are protected by BioCote ® , a 

silver-based antimicrobial agent that 

inhibits the growth of bacteria and molds 

HVY2LDPEN - 2L dispenser 

Size (mm): 290H x 163W x 145D 


Code: 548372 

HVY4LDREN - 4L dispenser 

Size (mm): 345H x 175W x 150D 


Code: 548373 

*This product is certified to have reduced environmental impact through its life cycle, from extraction of raw materials through to its production, use and disposal. 

181


SKIN HYGIENE 

A range of antimicrobial hand cleansers 

and hand sanitisers to provide a high 

level of hand hygiene in hygiene sensitive 

environments, such as the food industry 

and healthcare, or in environments where 

a higher level is preferred. 

CLEANSE ANTIMICROBIAL & HAND SANITISE 

OxyBAC ® FOAM Wash 

A highly effective, perfume-free and dyefree 

broad spectrum antimicrobial foam 

hand wash that is HACCP certified* for 

use in food production facilities. Contains 

Accelerated Hydrogen Peroxide ® to 

clean hands and kill 99.999% of many 

common bacteria and 99.99% of many 

common yeast and viruses when used 

as directed 

OXY1L - Size: 1L cartridge 

MOQ Case of 6 

Code: 548401 

OxyBAC ® Extra FOAM Wash 

A highly effective, perfume-free and dye-free broad spectrum 

antimicrobial foam hand wash, that is skin hypoallergenic and HACCP 

certified* for use in food production facilities. With OptiDose pump, it 

is designed for hygienic hand washing in high risk food industry and 

healthcare environments. 'Contains Accelerated Hydrogen Peroxide ® to 

clean hands and kill 99.999% of many common bacteria and 99.99% 

of many common yeast and viruses when used as directed 

OXYEX1L - Size: 1L cartridge MOQ Carton of 6 

Code: 548403 

OXYEX2LT - Size: 2L cartridge MOQ Carton of 4 

Code: 548404 

Cleanse Antimicrobial Dispensers 

Unique range of 1 litre and 2 litre sealed cartridge 

dispensers for exclusive use with genuine SC Johnson 

Professional refill cartridges only. Delivers the exact 

amount of product required, controlling usage and 

reducing waste. The push buttons are protected by 

BioCote ® , a silver-based antimicrobial agent that inhibits 

the growth of bacteria and molds 

ANT1LDSEN - 1L dispenser 

Size (mm): 233H x 130W x 115D 


Code: 548405 

ANT2LDPEN - 2L dispenser 

Size (mm): 290H x 163W x 145D 


Code: 548406 

InstantFOAM ® Complete Hand Sanitiser 

Highly effective broad spectrum alcohol based foam hand sanitiser which kills 99.999% of common germs. It is 

proven to be bactericidal, virucidal, yeasticidal and mycobactericidal. Perfume-free, dye-free, non-tainting to food and 

suitable for use with gloves. Skin hypoallergenic and proven to prevent skin dryness even after frequent use 

DIS47ML - Size: 47ml bottle MOQ Case of 12 

Code: 548388 Each £2.77 


Code: 548387 


Code: 548084 

DIS1000ML - Size: 1L cartridge MOQ Case of 6 

Code: 548086 

Hand Sanitiser 1L Dispenser 







and molds 

SAN1LDSEN - 1L dispenser 

Size (mm): 233H x 130W x 115D 


Code: 548391 

182 

*This product has been certified by HACCP International as being a food-safe hand hygiene product, suitable for use in food facilities that operate a HACCP 

based Food Safety Programme

SKIN RESTORE 

After-work skin restore creams help to 

maintain the skin in healthy condition by 

keeping it soft and supple, avoiding dryness. 

Using restore creams is an important 

element in skin care best practice. 

RESTORE / SKIN SAFETY CENTRES 


Stokolan ® Light PURE 

A mild perfume-free and dye-free skin conditioning 

cream with moisturisers to help care for the skin. A 

light formulation, it is designed for moderately dry skin 

and regular use. It absorbs quickly and is non greasy. 

ECARF Certified* and suitable for those with allergies 

and sensitive skin. Non tainting to food and compatible 

with glove use 

RES100ML - Size: 100ml tube 


Code: 431588 

RES1L - Size: 1L cartridge 

MOQ Case of 6 

Code: 548315 

Stokolan ® Sensitive PURE 

A perfume-free and dye-free skin conditioning cream, 

enriched with high levels of moisturisers, to soothe, 

nourish and hydrate sensitive skin. Skin hypoallergenic 

and suitable for those suffering from allergies or 

eczema-prone skin. ECARF certified*. Non-tainting to 

food, it is suitable for use in food production areas 

SSP100ML - Size: 100ml tube 


Code: 548295 

SSP1L - Size: 1L cartridge 

MOQ Case of 6 

Code: 431592 

Restore 1L Dispenser 







and molds 

RES1LDSEN - 1L dispenser 

Size (mm): 233H x 130W x 115D 


Code: 548385 

Skin Safety Centre - Small 

Robust, light-weight board that is ready-assembled with 

appropriate SC Johnson Professional ® dispensers. For 

use with SC Johnson Professional ® products to create a 

tailored skin care system 

• SSCSML1EN - Size: 590mm wide x 510mm high 

• Contains: 1 x 1L Protect Cream Dispenser, 1 x 2L 

Cleanse Heavy Dispenser and 1 x 1L Restore Cream 

Dispenser 


Code: 431595 

Skin Safety Centre - Large 

Robust, light-weight board that is ready-assembled with 

appropriate SC Johnson Professional ® dispensers. For 

use with SC Johnson Professional ® products to create a 

tailored skin care system 

• SSCLGE1EN - Size: 800mm wide x 570mm high 

• Contains: 1 x 1L Protect Cream Dispenser, 1 x 2L 

Cleanse Light Dispenser, 1 x 4L Cleanse Heavy 

Dispenser and 1 x 1L Restore Cream Dispenser 


Code: 548343 Each £108.35 

*This product meets the European Centre for Allergy Research Foundation (ECARF) criteria for being well tolerated by sensitive skin. ecarf-siegel.org/en/about-seal. 

183


MOBILE SKIN CARE / SWARFEGA 

Skin Safety Cradle for Mobile Workers 

A unique skin safety solution for vehicles and areas of limited space, the Skin 

Safety Cradle is a compact and complete 3-step skin care system. It can be 

conveniently fitted inside vans or work cabins and contains everything needed to 

protect, cleanse and sanitise the skin. The products do not require running water. 

The unit is robust for high durability and comes pre-drilled in four places for ease 

of fixing. The dispensing unit holds all three cradle cartridges 

ACC729 - Skin Safety Cradle 

Size: 260(h) x 307(w) x 93(d)mm 


Code: 510034 

DCSP01PR - Skin Safety Cradle Starter Pack 


Code: 510038 

Protect Cream Cartridge 

Combined protection and reconditioning 

cream. Protects against both oil and 

water-based contaminants and contains 

moisturisers to help prevent skin dryness. 

Apply before each work period or after 

washing hands. For use with Skin Safety 

Cradle 

• CRC34O - Size: 700ml cartridge 

• MOQ Case of 6 

Code: 510037 

Hand Cleaner Cartridge 

Smooth lime cream hand cleaner 

that can be used without water. 

Easily wipes away with paper 

towel, leaving no oily residue. 

Removes oil, grease, general dirt 

and grime. Formulated to help 

leave the skin soft and supple. For 

use with Skin Safety Cradle 

• CRH36V 

Size: 750ml cartridge 


Code: 510035 

Hand Sanitiser Cartridge 

Highly effective broad spectrum alcohol 

based gel hand sanitiser which kills 

99.999% of common germs. It is proven 

to be bactericidal, virucidal, yeasticidal 

and mycobactericidal. Perfume-free, dyefree, 

non-tainting to food and suitable for 

use with gloves. Skin hypoallergenic and 

formulated to help prevent skin softening 

during glove use. No water required. For 

use with Skin Safety Cradle 

• CRA36O - Size: 750ml cartridge 


Code: 510036 

184 

SWARFEGA 

Swarfega ® Original Classic 

Classic smooth green gel formula hand cleaner with 

added conditioner, which is easy to apply and quick 

rinsing to remove ingrained oil, grease and general 

grime. Leaves the skin feeling smooth after use 

SWA450MP - Size: 450ml pump top bottle 

MOQ Case of 6 

Code: 510103 

SWA45L- Size: 4.5L tub 

MOQ Case of 4 

Code: 431862 

Swarfega ® Lemon 

Solvent-free lemon hand cleaner, combining highly 

developed surfactant cleaning agents with natural 

cornmeal hand scrub to remove oil, grease and general 

soilings quickly and effectively. Contains moisturiser to 

help care for skin 

SWL4LMP: Size: 4L pump top bottle 

MOQ4 Case of 4 

Code: 431864 

SWL4LTR - Size: 4L cartridge 

MOQ4 Case of 4 

Code: 510147 

SWA4000D - 4L Swarfega Cleanse Dispenser 


Code: 510127 

Swarfega ® Orange 

Advanced formulation, solvent-free heavy duty hand 

cleaner, containing non-abrasive scrubbers for a deepdown 

cleaning action and moisturiser to help care for 

the skin. Removes ingrained oil, grease and general 

grime 

SOR4LMP - Size: 4L pump top bottle MOQ Case of 4 

Code: 510130 

SORC4LTR - Size: 4L cartridge MOQ Case of 4 

Code: 510811 

SOR15L - Size: 1.5L pail 

Code: 5101322 

SWA4000D 

4L Swarfega Cleanse Dispenser. 

Packed in: Each Code: 510127 

Swarfega ® Jizer 

Parts degreaser that will quickly dissolve heavy deposits 

of mineral oil, grease, tar, bitumen and waxes. Can be 

used for removing oil and grease marks from many floor 

surfaces, tar spots and oil from body work and cleaning 

paint brushes 

SJZ5L - Size: 5L tin 

MOQ Case of 4 

Code: 516315 

SJZ25L - Size: 25L tin 


Code: 516320 


Swarfega ® Heavy 

Heavy duty gel formula hand cleanser containing 

nonabrasive perlite granules and added conditioner, to 

quickly remove deeply ingrained oil and grease soilings 

and leave the skin feeling smooth after use 

SHD45L - Size: 4.5L tub 

MOQ Case of 4 

Code: 510150 

SHD125KG - Size: 15L pail 


Code: 510151 

Swarfega ® Duck Oil 

A silicone-free, non-conductive, multi-purpose service 

spray. Exceptionally low surface tension means it can 

easily penetrate, lubricate and protect with no need to 

dismantle machinery and parts 

SDO500ML - Size: 500ml aerosol 


Code: 760696 

SDO5L - Size: 5L spray bottle 

MOQ Case of 4 

Code: 760684

Kitchen Cleaning 

CLEANING PRODUCTS 

Washroom Cleaning 


Mr Muscle ® Kitchen 

Mr Muscle ® Kitchen cleaner kills 99.99% 

of viruses and bacteria*. Formulated to 

easily tackle tough kitchen grease and 

grime found in busy commercial kitchens 

Brillo ® Washing-Up Liquid 

Brillo ® Washing Up Liquid contains a 

concentrated blend of high active grease 

cutting ingredients that leaves tableware 

clean and smear free. 5 litres makes up 

to 7,500L of ready to use dish washing 

detergent. Fresh citrus fragrance. 

Duck ® 

Deep Action Gel Marine 

Mr Muscle ® Washroom kills 99.99% 


easily remove soap scum and stubborn 

grime from busy commercial washrooms 

Mr Muscle ® Washroom 

Mr Muscle ® Kitchen cleaner kills 99.99% 


easily tackle tough kitchen grease and 

grime found in busy commercial kitchens 

316525 - Size: 750ml Trigger 

Code: 508185 

BWU5LTR - Size: 5L 

Code: 518431 

320227 - Size: 750ml 

Code: 519502 

316526 - Size: 750ml Trigger 

Code: 508120 

Can't see what you're looking for? 

We are able to supply a full range of cleaning 

chemicals and janitorial products. 

Please contact us for more details. 

Multi-surface Cleaning 

Pledge ® Multi-Surface Cleaner 

Pledge ® Multi-Surface cleans most hard surfaces by 

removing dust, smears, fingerprints and messes without 

leaving streaks or residue, and without damaging 

surfaces. Exclusive extra large commercial pack size 

318131 - Size: 400ml aerosol 

Code: 542119 

Air Fresheners 

Glade ® Pacific Breeze 

Glade ® Pacific Breeze is an exclusive Professional 

fragrance that provides the serenity of a sea bath with a 

combination scent of green leaves and citrus. One short 

burst instantly refreshes and invigorates any area in your 

commercial space. Exclusive extra large commercial 

pack size 

314222 - Size: 500ml aerosol 

Code: 534172 

Other Cleaning 

Mr Muscle ® 

Window & Glass 

Mr Muscle ® Window 

and Glass cuts through 

fingerprints, smudges 

and general grime, 

cleaning all your 

glass, mirror and 

window surfaces to a 

streak-free shine. 

Added vinegar for 

effective cleaning 

316533 - Size: 750ml trigger 

Code: 508241 

Mr Muscle ® 

Floor 

Cleaner 

Mr Muscle ® 

Floor Cleaner is 

formulated for 

daily use to lift 

stubborn grime 

and dirt. Enhances 

shine and natural beauty of wood floors 

and suitable for use in an auto scrubber. 

With citrus fragrance. Concentrated 

formula makes up to 200L 

688173 - Size: 5L 

Code: 508104 

Mr Muscle ® 

Drain Gel 

Mr Muscle ® Drain Gel 

sinks through standing 

water and blockages 

to clear blocked sinks, 

plugholes and pipes. 

5 minute action time.** 

308557 - Size: 1L 

Code: 508114 

Pledge ® Amazing 

Shine Polish 

Pledge ® Amazing Shine 

Polish removes dust, messes, 

fingerprints, smudges and 

smears and improves the 

appearance of most hard 

surfaces. Exclusive extra 

large commercial pack size 

318130 - 

Size: 400ml aerosol 

Code: 542104 

*Use biocides safely. Always read the label and product information before use. ** Laboratory tested on bathroom clogs (hair and soap). For tougher clogs, leave longer. 

185

First Aid 

Buying Guide 

Is Your First Aid Kit Up To Date? 

BS8599-1 COMPLIANT - WORKPLACE KIT 

In the past decade, workplace practice has radically changed in many industries. These changes in 

working behaviour and environments have brought with them new risks and hazards for employees. 

June 2011 saw the introduction of fresh, updated guidance that now accurately reflects best 

practice. A new range of kits was introduced and the recommendations came into full force in 

January of 2012. The new BS8599-1 kits represent a complete overhaul of the 1997 content and it 

is now incumbent on all businesses to review their first aid kits to ensure they remain fit for purpose. 

You should use the guide below, together with your risk assessment, to decide on the size and 

placement of first aid kits in your workplace. 

Employers are required 

to undertake a risk 

assessment to determine 

what the hazard levels are 

and how many employees 

are involved in the specific 

area to be covered. 

Here is a useful guide 

provided to help you match 

the assessment to an 

appropriate kit. 

CATEGORY OF HAZARD 

LOW HAZARD 

E.G. Shops, offices, libraries etc. 

HIGH HAZARD 

E.G. Light engineering and 

assembly work, food 

processing, warehousing, 

extensive work with 

dangerous machinery or sharp 

instruments, construction, 

chemical manufacture etc. 

No. OF 

EMPLOYEES 

Less than 25 

25-100 

More than 100 

Less than 5 

5-25 

More than 25 

SIZE OF FIRST 

AID KITS 

Small 

Medium 

Large (1 per 100 

employees) 

Small 

Medium 

Large (1 per 

25 employees) 


The Health and Safety (First Aid) Regulations 1981 

require you to provide adequate and appropriate 

first-aid equipment, facilities and people so your 

employees can be given immediate help if they are 

injured or taken ill at work. 

What is ‘adequate and appropriate’ will depend 

on the circumstances in your workplace and you 

should assess what your first aid needs are. 

The minimum first aid provision on any 

work site is: 

• A suitably stocked first-aid box 

• An appointed person to take charge of the 

first aid arrangements 

• Information for employees about first 

aid arrangements 

It’s is important to remember that accidents and 

illnesses can happen at any time. First aid provision 

needs to be available at all times to people that 

are at work. 

The contents of the first aid containers should 

be examined frequently and restocked after use. 

Sufficient back up supplies should be held on site. 

Van And Truck 

First Aid Kit 

See page 192 

Premier Eye Wash Station 

See page 194 

186

First Aid 

First Aid 

187

First Aid 

ARE YOUR 

FIRST AID 

KITS IN 

DATE? 

KNOW YOUR 

WORKPLACE RISKS 

CHECK THE 

EXPIRY DATES 

CHECK THE 

CONTENTS 

PLACE YOUR 

ORDER 

Expiry Dates on First Aid Stocks 

5 

Check your first aid kits regularly as some items can 

expire. If items have passed their expiry date, then 

they may be ineffective and unsafe and should be 

disposed of and replaced as soon as possible. 

* 

YEARS 

SHELF LIFE 

* 5 years shelf life from date of manufacture 

188

HSE First Aid Kits 

First Aid 

SPECTRA 

FIRST AID SYSTEM 

SPECTRA 


SPECTRA 

One first aid solution. 


Spectra achieves the latest standard and helps 

meet regulatory requirements in the workplace. 

Customisable to fit within any environment, it’s 

easy to match the panels required with the risks 

identified in any workplace. SPECTRA 

FIRST AID SYSTEM 

Each panel interlocks with others to provide a 

 

comprehensive and complimentary first 

aid solution. 

*First aid kits are supplied 

complete with a SPECTRA 

temper seal, 

so Health and Safety FIRST Managers AID SYSTEM 

can easily monitor first aid usage. 

SPECTRA 


Primary kit 

Supplied complete with temper 

seal*. Kits are securely mounted 

to the panel and can be quickly 

SPECTRA 

released in an emergency, meeting 

FIRST all the current AID national SYSTEM standards 

for workplace first aid provision. 

First Aid guidance 

provided in an illustrated format 

SPECTRA 

to assist in the first aid measures 

FIRST relevant AID to the first SYSTEM aid panel. 

Supplementary kit 

Provides additional contents, 

which can be used for minor 

injuries, reserving your primary 

kit for more serious incidents. 

Accident Books 

Stored conveniently to remind 

first responders of their 

regulatory requirement to 

record workplace accidents. 

Spectra 

Workplace 

First Aid System 

Compliant to latest BSi workplace standards 

• Spectra Panel, Medium BS8599-1 Workplace First Aid 

Kit, Pilfer Proof Plasters and Dispenser, Accident Book, 

Sign ‘Workplace System Guidance’ 

Code: 254891 

Spectra 

Eye Wash 


Provides fast and effective 

treatment for minor eye injuries 

• Spectra Panel, Eye Wash First Aid Kit, Eye Pod First 

Aid Kit, Accident Book, Sign ‘Eye Wash System 

Guidance’ 

Code: 254893 

Spectra 

Biohazard 


Body fluid and sharps clean-up packs contain everything 

required for containment and disposal 

• Spectra Panel, Body Fluid Clean-Up Kit, Sharps 

Clean-Up Kit, Accident Book, Sign ‘Workplace System 

Guidance’ 

Code: 254894 

Spectra 

Burns 


For the treatment of minor burns; includes various sized 

dressings to relieve pain, cool, and comfort 

• Spectra Panel, Burn First Aid Kit, Burn Plaster Kit, 

Accident Book, Sign ‘Burns System Guidance’ 

Code: 254895 

Spectra 

AED System 

Everything required for the effective treatment of adults 

or children in a cardiac emergency. Includes prep kit 

prior to AED treatment 

• Spectra Panel, Mediana A15 AED, AED Prep Kit, 

Accident Book, Sign ‘AED Guidance for Use’ 

Code: 254896 

Spectra 

Chemical Splash 


Neutralising effect, reduces 

flushing time and volume of liquid required 

• Spectra Panel, Eye Wash and Skin Flush First Aid Kit, 

Hydrofluoric Acid Treatment Kit, Accident Book, Sign 

‘Chemical System Guidance’ 

Code: 254966 

189

First Aid 


NEW 

GLOW IN THE DARK FIRST AID KITS 

BS8599-1:2019 Kit 

in Glow-in-the-dark Aura Box 

• Photoluminescent boxes 

• Glow-in-the-dark first aid kits ensure 

first aid equipment can be easily 

located in low light conditions 

• Kit contents fully updated to meet 

BS8599-1:2019 requirements 

• British Standard compliant first aid kits reflect 

the most up-to-date changes in both workplace 

practice and risks 

Small Workplace Code: 254922 

Medium Workplace Code: 254923 

Large Workplace Code: 254924 

“The loss of power and illumination in the event of an emergency can cause panic and confusion. 

Glow-in-the-dark first aid kits will help locate and identify first aid equipment in an emergency, 

even in the event of a power failure." 

BS8599-1:2019 Workplace Kit 

in Aura Box 

• The practical and stylish Aura boxes are suitable for a 

wide range of workplaces, including public areas 

• Airtight, dust-proof, and water-resistant 

• All contents are BS8599-1 Compliant and are fully 

up-to-date with the latest 2019 standard revision 





in Lewis-Plast Box 

• The new range of Lewis-Plast BS8599-1 

Compliant First Aid Kits are suitable for a wide 

range of workplaces 

• Unique Lewis-Plast first aid boxes with integrated 

handle and wall-hanging solutions 





in Essentials Box 

• Tough, dust-proof, and hygienic 

• Polypropylene box with bulkhead bracket 




BS8599-1:2019 Eye Wash First Aid Kit 

• BS8599-1:2019 small and medium kits 

with extra contents 


Code: 254925 

190 

Evacuation Kit in Rucksack 

• BS8599-1:2019 medium kit with extra content 

• Easy-to-carry rucksack with multiple 

compartments 

• Detachable smaller `grab and go' internal kit 

• EXTRA CONTENT 

2x Burn Dressings, 10x10cm 

1x Eye Wash, Bottle 500ml 

1x Dressing, Trauma Medium 

1x Dressing, Trauma Large 

8x Foil Blankets, Adult 

1x Resuscitation Face Shield 

Code: 254812 

What size of kit do I need? 

The information below provides guidance 

for employers but does not replace the 

requirement for a risk assessment to be 

carried out. 

SMALL KIT 

LOW RISK - 1 Kit for less than 25 employees 

HIGH RISK - 1 Kit for less than 5 employees 

MEDIUM KIT 

LOW RISK - 1 Kit per 25-100 employees 

HIGH RISK - 1 Kit per 5-25 employees 

LARGE KIT 

LOW RISK - 1 Kit per 100 employees 

HIGH RISK - 1 Kit per 25 employees 

What’s included in BS8599-1:2019 

Compliant First Aid Kits? 

SMALL MEDIUM LARGE 

Bandage, Conforming 1 2 2 

Bandage, Triangular 2 3 4 

Dressing Pad, Adhesive 0 0 0 

Dressing, Burn 1 2 2 

Dressing, Eye Pad 2 3 4 

Dressing, Finger 2 3 4 

Dressing, Sterile, Large 2 3 4 

Dressing, Sterile, Medium 2 4 6 

Foil Blanket 1 2 3 

Gloves, Nitrile (Pairs) 6 9 12 

Guidance Leaflet 1 1 1 

Plasters, Washproof, Assorted 40 60 100 

Resuscitation Face Shield 1 1 2 

Shears 1 1 1 

Tape, Microporous 1 2 3 

Wipes 20 30 40


BS8599-1:2019 First Aid Kit Refills 

• Immediate refreshment of original kit 

• Fits into your existing box 




When do I need a 

supplementary first aid kit? 

If you have lone workers or those who work away 

from the workplace, such as security, cleaners, 

or maintenance staff, a personal issue kit enables 

basic first aid to be provided quickly and easily. 

If you have employees who are at risk of a severe 

life-threatening bleed or in the event of a masscasualty 

attack, a critical injury pack is required as 

standard first aid kits are not appropriately equipped. 

The HSE now recommends employers provide 

haemostatic dressings and tourniquets in their 

first aid provisions, and appropriate training for 

employees, where working with an identified risk 

of obtaining severe bleeding injuries. 

British Standard Supplementary 

First Aid Kits 

PERSONAL 

ISSUE 

CRITICAL 

INJURY 

Bandage, Triangular 1 0 

Dressing, Haemostatic 0 2 

Dressing, Sterile, Large 1 0 

Dressing, Sterile, Medium 0 0 

Dressing, Trauma, Large 0 2 

Foil Blanket 1 1 

Gloves, Nitrile (Pairs) 2 2 

Guidance Leaflet 1 1 

Plasters, Washproof, Asstd. 10 0 

Resuscitation Face Shield 1 1 

Shears 1 1 

Tourniquet 0 1 

First Aid 

Wipes 4 0 

Critical Injury 

BS8599-1:2019 Workplace 

Personal Issue 

• 1 kit per employee 

• Soft bag with white cross 




• Rigid box with bracket 

Helsinki Bag Code: 254933 

Compact Aura Box Code: 254936 




• Handy vinyl pouch 

Vinyl Pouch Code: 254934 




• Bum bag with waist strap 

Riga Bum Bag Code: 254935 

Critical Injury Pack 

The critical injury pack is designed to provide 

immediate, life-saving first aid to someone 

who has sustained a severe bleeding injury 

in the workplace. 

Recent Health and Safety Executive guidance 

now recommends employers provide 

haemostatic dressings and tourniquets in 

their first aid provisions for employees working 

with an identified risk of obtaining severe 

bleeding injuries. 

The critical injury pack is designed to be issued 

one per person (obviously only to employees 

exposed to the risk). The injured person then 

has their pack used on them, rather than a firstaider 

using their pack on someone else 

Scandi Bag Code: 254861 

191

First Aid 


British Standard Motoring 

First Aid Kits – KEEP UP TO DATE 

Components have been specifically selected for ease of 

use, and for coping with (without any special training), 

both minor and major road traffic accident injuries. 

“Staff working remotely from a company vehicle should 

be equipped with a travel and motoring first aid kit.” 

BS8599-1:2014 Small Motokit 

• For moped, motorcycle, motor tricycle, and 

quadricycle 

• Suitable for up to 3 people 

• CONTENTS 

2x Bandages, Conforming 

2x Bandages, Triangular 

5x Dressing Pads, Low Adherent 

1x Dressing, HSE Large 

5x Eye Wash, Pods 20ml 

2x Finger Stalls 

2x Gloves, Pairs 

1x Guidance Leaflet 

20x Plasters, Washproof Asstd. 

4x Safety Pins 

1x Scissors 

1x Tape, Microporous 

6x Wipes, Cleansing 

Code: 254986 

Motokit ® Accident, Emergency 

and Breakdown 

• Safely manage a roadside emergency 

• Specifically designed for vehicle use 

• Robust clamshell designed bag 

• ACCIDENT, EMERGENCY AND BREAKDOWN KIT 

1x BS8599-2 Small Kit in Bag 

2x Breathalysers 

1x Fire Extinguisher 600g 

2x High Visibility Vests 

1x Torch 

1x Warning Triangle 

• BS8599-2 SMALL KIT 

1x Dressing, Burn 10x10cm 


1x Gloves, Pair 




1x Shears 


Code: 254897 

BS8599-1:2019 and BS8599-2:2014 

Compliant Travel and Motoring Kit 

The size of the first aid kits required for motor vehicles 

is determined by the size of the vehicle, category of 

hazard, and passenger numbers 

• For car, taxi, van, and truck 

• Maximum 8 passengers 

• CONTENTS 

1x Bandage, Triangular 

2x Burn Dressings, 10x10cm 

1x Dressing Pad, Adhesive 

1x Dressing, HSE Medium 


1x Foil Blanket, Adult 





1x Shears 


Code: 254938 

192 

Van and Truck First Aid Kit 

• Sits neatly in the van and cab. 

• Clip-on mounting bracket. 

• CONTENTS 



5x Dressing Pads, Low Adherent 



2x Finger Stalls 

2x Gloves, Pairs 




1x Scissors 

1x Tape, Microporous 


Code: 254809 

Travel Pouch First Aid Kit 

• Handy general purpose first aid kit 

• Easily fits in a car 

• Suitable for one person 

• Suitable for outdoor conditions 

• CONTENTS 


1x Bandage, Crepe 



1x Dressing, HSE Medium 




1x Scissors 


Code: 254810 

Motokit Winter Car Care 

• Essential contents for Winter Car Care 

• Contains mini first aid kit 

• WINTER CARE KIT 

1x De-Icer Spray 500ml 

1x Demist Pad 

1x Foil Blanket, Adult 

1x Hand Wipes (pack of 12) 

1x Ice Scraper 

1x Mini First Aid Kit 

1x Screenwash 1ltr 

1x Wind Up Torch 

• MINI FIRST AID KIT 


1x Dressing, HSE Large 18cm x 18cm 



10x Plasters, Washproof Assorted 



Code: 254688


First Aid 

Advice on the difference between Health and Safety Executive (HSE) 

First Aid Kits and British Standard Institute (BSI) First Aid Kits. 

The British Standard compliant first aid kit was introduced to provide a more comprehensive solution offering greater 

levels of protection, containing more items, and helping to respond to a wider range of risks in the workplace. 

10 PERSON 20 PERSON 50 PERSON 1 PERSON 

Bandage, Triangular 4 6 8 2 

Dressing, Eye Pad 2 4 6 - 

Dressing, Sterile, Large 2 3 4 1 

Dressing, Sterile, Medium 6 9 12 - 

Gloves, Nitrile (Pairs) 1 2 3 1 

Guidance Leaflet 1 1 1 1 

Plasters, Washproof, Assorted 20 40 60 10 

Safety Pins 8 12 16 6 

Wipes 6 10 20 2 

HSE Workplace Kit in Aura Box 

• HSE basic workplace kit 

• Suitable for public areas 

• Airtight, dust-proof, and water-resistant 

10 Person Code: 254819 



HSE Workplace Kit in Lewis-Plast Box 

• Unique cost-effective Lewis-Plast First Aid Box 

• Integrated handle and wall-hanging solutions 




HSE KeepSAFE Workplace Kit 

in Essentials Box 

• Tough, dust-proof, and hygienic 





HSE KeepSAFE 1 Person First Aid Kit 

• Vinyl wallet - for anyone working away from base 

• Essential content for lone employees 

• Ideal for the car 

Code: 254867 

First Aid Kit Refills 

• Immediate refreshment of original kit 

• Fits into your existing box 




Lyon Fast Response First Aid Kit 

• For major incidents and emergencies 

• Essential in high risk or expansive working areas 

Code: 254968 

First Aid Glass Cabinets 

• Toughened durable glass door 

• Safe and visible supplies 

• Quick release push button 

• Secure lock with keys 

Small 30x30x12cm Code: 254846 

Large 46x30x12cm Code: 254847 

First Aid Accident Report Book 

• Mandatory requirement for workplaces 

• Data protection compliant 

• Guidance included for record keeping 

• 40 pages 

Code: 254971 

193

First Aid 

Eye Washes 

Eye Wash & Skin Flush for Acid & Alkali Splashes 

Reduced flushing time 

Reduced volume of fluid 

Reduced patient discomfort 

Reduced risk to first aider 

After eye or skin contact with acid or alkalis, it is only 

seconds before the pH value is significantly altered, and 

the corrosive damage may lead to permanent injury. 

Acid and alkalis must be quickly neutralised to a pH 

value equal to the normal level in the eye or on the skin. 

The use of ordinary water or 0.9% sodium chloride will 

only provide a limited degree of effective dilution with an 

increased flushing time. 

Redcap Phosphate Buffer Solution has a neutralising 

effect which significantly reduces the flushing time and 

the volume of fluid required to dilute and neutralise acid 

and alkali splashes. 

Easy-to-squeeze bottles, allow the eye or skin to be 

irrigated easily and efficiently, reducing the risk of 

severe injury caused by acid, alkali, or particulate 

contamination. 

Chemical Splash Eye Wash Station 

• Luminous, printed instructions 

• Bottle includes integral eye bath 

• Eye wash for acid and alkali 

• CONTENTS 

2x Dressings, Eye Pad 

2x Redcap Eye Wash, Bottles 500ml 


1x Mirror 

Code: 254930 

Eye Wash and Skin Flush Kit 

Neutralising effect which significantly reduces the 

flushing time and the volume of fluid required to dilute 

and neutralise acid and alkali splashes 

• CONTENTS 


2x Redcap Eye Wash, Bottles 500ml 


1x Mirror 

Code: 254879 

Redcap Eye Wash and Skin Flush 

• Purified water 95.1% 

• Phosphate buffer solution 

• Eye wash and skin flush for acid and alkali 

500ml Code: 254915 

500ml with Cap Code: 254878 

194 

Premier Eye Wash Station 

• Robust dual purpose HSE compliant eye wash station 

• Luminous, printed instructions 

• Dustproof heavy-duty cover 

• CONTENTS 


2x Eye Wash, Bottles 500ml 


1x Mirror 

Code: 254696 

Emergency Eye Wash Station 

• High visibility eye wash station 

• Illuminated, printed instructions 

• Provides fast and effective treatment 

for minor eye injuries. 

• CONTENTS 



1x Mirror 

Code: 254697 

Eye Pod Station 

• High visibility eye pod station 

• Illuminated, printed instructions 

• For use on minor eye irritations only 

• Holds eight 20ml sterile saline pods 

• CONTENTS 



1x Mirror 

Code: 254931


First Aid 

Eye Wash Station 

• Double Eye Wash Station is a deluxe version 

with eye pods and insert 

• Durable, stylish, polypropylene box 

Double Eye Wash 



2x Eye Wash, 20ml Pods 

1x Mirror 

Code: 254699 

Triple Eye Wash 


3x Eye Wash, Bottle 500ml 

Code: 254691 

Biohazard Kits 

Eye Wash Station 

• A small, versatile station in a traditional 

economic green box 

• Translucent door for easy stock checking 

• Wall mountable 

• Provides fast and effective treatment 

Eye Wash Station Code: 254932 

Saline Eye Wash 

• Sodium Chloride 0.9%w/v Ph.Eur 

• Mandatory under HSE regulations 

• Sterile, safe, and non-toxic 

500ml Code: 254695 

500ml with Cap Code: 254693 

Eye Pods 20ml Code: 254834 

Kits contain individual applications 

for an efficient, simple, stepped 

approach to biohazard control. 

1. 

Sharps Containers 

• For the safe containment of contaminated 

hypodermic needles 

• Plastic container and lid 

0.6 litres Code: 580222 

Body Fluid Clean-Up Kit 

• Individually boxed with full requirements 

• Clear instructions on pack exterior 

• Complete protection for users 

• SINGLE APPLICATION 

1x Absorbent Granules, 10g 

1x Apron, Polythene 


1x Sanitiser Spray, 8ml 

1x Scoop Scraper 

1x Tissue, Pack 10 

1x Waste Bag 

1x Wipe, Cleansing 

2x Wipes, Dry 

2. 

Put on the protective apron and gloves. 

3.75 litres Code: 580223 

1 Application Kit Code: 254982 


Sprinkle absorbent granules over spill. 


3. 

Sharps Clean-Up Kit 

• Handy single-use incident pack 

• Provides essential handling equipment 

• Packs include safe disposal products 

• SINGLE APPLICATION 

1x Biohazard Bag 

1x Forceps 


1x Sharps Container, 0.2ltr 

1x Spray, Disinfectant, 8ml 

1x Wipe, Cleansing 



Body Fluid Clean-Up Kit 

• Complete biohazard and sharps protection 

• Deals with both incident types 

• Safe disposal products included 

• Meets current HSE requirements 

• CONTENTS 

3x Body Fluid Clean-Up Kits 

2x Sharps Clean-Up Kits 


4. 

Allow spill to turn gelatinous, then 

scoop and scrape it into biohazard bag. 

Disinfect the area, and wipe down. 

Place everything into the biohazard 

bag and destroy. 

195

First Aid 

First Aid Consumables 

KeepSAFE Fabric Plasters 

• Latex-free, lightweight stretch 

• Suitable for sensitive skin 

• 30 4cm x 4cm, 

30 7cm x 2cm, 

30 7.5cm x 2.5cm, 

10 7.5cm x 5cm 

Code: 254800 

KeepSAFE Washproof Plasters 

• Washproof with low allergy adhesive 

• 30 4cm x 4cm, 

30 7cm x 2cm, 

30 7.5cm x 2.5cm, 

10 7.5cm x 5cm 

Code: 254801 

KeepSAFE Blue Plasters 

• Bright blue detectable plasters for food 

preparation areas 

• 30 4cm x 4cm, 

30 7cm x 2cm, 

30 7.5cm x 2.5cm, 

10 7.5cm x 5cm 

Code: 254802 

EasiPlaster 

• Latex-free and easy-tear 

• Fast, easy application 

• Sticks to itself, not to skin, hair, or wounds 

Code: 254972 

1,2,3 Plasters ® for Blisters 

• Relieves pain instantly 

• Protects against rubbing 

• Promotes faster healing 

• Hydro-colloid technology 

• 2 sizes, box of 5 

Code: 254845 

Nasal Plug 

• Suitable for all minor bleeding wounds 

• Maintains a moist healing environment by forming 

a soft gel 

• Absorbs up to 20 times their own weight 

• Box of 5 

Code: 254870 

HSE Dressings 

• Sterile dressing with conforming stretch bandage 

• HSE compliant 

Medium: 12cm x 12cm Code: 254839 

Large: 18cm x 18cm Code: 254840 

Eye Pad Dressing 

• No.16 sterile dressing with conforming stretch 

bandage. 

• Low adherent. 

Code: 254841 

Triangular Bandage 

• Multi-functional bandage 

• Ideal for slings and splinting 

• Size: 90cm x 127cm 

Code: 254842 

196 

Foil Emergency Blanket 

• Disposable, ultra-insulating blanket 

• Heat-reflective metallic surfaces 

• Helps treat or prevent hypothermia 

• Adult, 130cm x 210cm (unfolded) 

Code: 254881 

Wound Cleansing Wipes 

• Sterile and alcohol-free 

• Meets current HSE regulations 

• Individually wrapped, disposable wipes 

Box of 100 Code: 510175 

Box of 10 Code: 548274 

Rebreath Mouth-to-Mouth Resuscitator 

with Valve 

• Plastic film containing a one-way valve 

• Film acts as a barrier to help prevent infection 

• One-way valve allows expired air ventilation 

Code: 254898

Defibrilators and Casualty Movement Aids 

First Aid 

AED Bracket 

• Universal AED Bracket 

• Sturdy metal bracket is ideal for mounting 

any AED on a wall 

• Size: 12.3H x 19W x 9.5cmD 

Code: 254818 

Mediana AED A15 

• Adult/Child setting with one switch 

• Suitable for workplace, schools and clubs 

• Automatic switch-on when lid opens 

• Requires no experience or formal training 

• Adult/Paediatric pads attached, ready for use 

• Free tutorial and guide with every purchase 

• CONTENTS 

1x Mediana HeartOn AED A15 

1x Instruction Manual 

1x SD Card 

1x Set Adult/Paediatric Defibrillation Pads 

1x Soft Carry Case 

Mediana AED A15 Code: 254973 

AED A15 Pads Code: 254974 

AED A15 Battery Code: 254945 

AED A15 Paediatric Pads Code: 254956 

AED Outdoor Wall Cabinet 

• Multiple security options. 

• Thermostat controlled with LCD screen displaying the 

internal temperature 

• Integrated alarm and remote control 

• Size: 50 x 40 x 22cm 

Code: 254946 

AED Metal Wall Cabinet 

• Toughened durable glass door 

• Alarm sounds when opened 

• Lockable, with quick release push-button 

• Compatible with most AED models 

• Size: 46 x 30 x 14.5cm 

Code: 254957 

Code Red Rescue Bi-Fold Stretcher 

• High strength aluminium alloy frame 

• Waterproof, fireproof, anti-cracking material 

• Complete with fully zipped carry bag and straps 

• Easy to clean 


Code: 254618 

Code Red Evacuation Chair 

• Complete with cover and wall bracket 

• Lightweight and compact for easy use and storage 

• Adjustable head pad and patient restraint 

• Aluminium alloy materials, two rear wheels 

• COLOUR MAY VARY 

Code: 254617 

Code Red 2 Wheel Transit Chair 

• Wipe-clean PVC cover 

• Small, lightweight, and easy to handle 

• 2 wheels, footrest and armrest 

• Foldable for convenient carriage and storage 

• Safety belts for patient protection 

Code: 254948 

Code Red Treatment Couch with Roll 

• Complete with couch roll holder 

• Fixed height 

• Two sections 

• Adjustable head/back rest, from horizontal to 85˚ 

• Soft faux leather upholstery 

• Easy to clean and maintain 

Code: 254947 

197

Index 

Index 

3M 4000+ Half Mask 104-105 

3M Adflo Respirator 112 

3M Air Fed System 111 

3M Aura Gen3 Disposable Masks 94-95 

3M Bump Caps 33, 155 

3M Coolflow Respirator 104 

3M Disposable Masks 94-100 

3M E.A.R Hearing Protection 158-167 

3M Face Fit Testing Kits 121 

3M Fall Arrest 173-175 

3M HF 800 Series Half Mask 109 

3M Jupiter Respirator 114-116 

3M Peltor Hearing Protection 168-171 

3M Powered Air 108-116 

3M Protective Coveralls 18 

3M Radio Headsets 168 

3M SecureFit Safety Helmet 153 

3M Speedglas Respirator 112 

3M Versaflo 111-116 

3M X Series Ear Muffs 170-171 

A 

Alpha Solway Ear Muffs 167 

Alpha Solway Safety Helmets 149 

Ansell Hand Protection 38-67 

Ansell Disposable Gloves 62 

Ansell Chemical Gloves 63 

Anti-impact Gloves 49-52 

Anti-vibration Gloves 49-52 

B 

Bandages 196 

Banded Ear Plugs 166 

Beard Masks 21 

Bib and Brace 29 

Biohazard Kits 195 

BlazeTEK Flame Retardant Clothing 12-14 

Bodyguard Rail Clothing 8-11 

Bolle Eyewear Accessories 145 

Bolle Prescription Eyewear 128 

Bolle Safety Eyewear 124-143 

Bolle Safety Goggles 142-143 

Bolle Welding Safety Eyewear & Helmets 140 

Boot Polish 91 

Boots, Safety 69-91 

Boots, Wellingtons 86-87 

Browguard 138-139 

Brightboot Safety Wellingtons 86 

Bump Caps 33, 155 

C 

Canadian Style Rigger Gloves 47 

Catersafe 20-21 

Caps, Bump 33, 155 

Centurion Forestry Protection 151 

Centurion Helmet Accessories 152 

Centurion Safety Helmets 148-151 

Centurion Scala 152 

Chemical Resistant Gloves 63-64 

Chemical Resistant Coveralls 15-18 

Cleaning Chemicals 185 

Clothing and Workwear 23-35 

Cold Handling Gloves 67 

Cold Weather Hoods 154 

Communication Headsets 168 

Cotton Gloves 45 

Colour Coded Gloves 53 

Coveralls 29 

Cut Resistant Gloves 53-57 

Cut Resistant Gloves - Kevlar 66 

Cut Resistant Colour Coded Gloves 53 

Cut Resistant Sleeves 55 

D 

Deb Cradle System 184 

Deb Skincare System 176-184 

Detectable Ear Plugs 163 

Dewalt Gloves 52 

Dewalt Safety Footwear 79, 82 

Disposable Coveralls . . . . . . . . . . . 15-18 

Disposable Gloves 56, 62 

Disposable Masks 94-100 

Disposable Overshoes 19, 21 

Disposable EAR Ear Plugs 164-165 

Drager Disposable Respirators 96-100 

Drager Parat Escape Hood 120 

Drager Powered Respirators 117-119 

Drager X-Plore 117-119 

Dry Helmet Cooling 154 

Dr. Martens Safety Footwear 79-81 

Dunlop Safety Wellingtons 86-87 

DuPont, Gloves 58-59 

DuPont, Tyvek Coveralls 15-17 

DuPont, Tychem Coveralls 15-17 

E 

Ear Muffs 167-170 

Ear Plugs . . . . . . . . . . . . . . . .158-163 

Ear Plug Dispensers 164-165 

Ear Plugs Banded 166 

Ear Plugs Detectable 163 

Ear Plugs Foam 158-161 

Electrical Insulating Gloves 65 

Elipse Respirators 102-103 

Endurance Workwear 24-34 

Endurance RainMaster 33-34 

Engineer’s Mate Glove 62 

Escape Hoods 120 

Executive Hi-Visibility Waistcoat 7 

Executive Shoes 84 

Eye and Face Protection 123-145 

Eyewear Accessories 144-145 

Eyewear, Safety 123-145 

Eyewash Stations 194-195 

F 

Faceshields 138-139 

Face Fit Testing Kits 121 

Fall Arrest Kits 174-175 

First Aid 189-196 

First Aid Consumables 196 

First Aid Kits 189-196 

First Base Bump Protection 33, 155 

Flame Retardant Workwear 12-14 

Fleece Jackets 27 

Foam Ear plugs 158-161 

Foam Knee Pads 35 

Food Industry Clothing 20-21 

Food Processing Gloves 20-21, 56 

Footwear Accessories 91 

Forestry Protection 151 

Full Face Mask Respirators 107-108 

G 

Gauntlets . . . . . . . . . . . . . . . . . 58-65 

General Handling Gloves . . . . . . . . . 45-46 

GO/RT Hi-Visibility Clothing 8-11 

Goggles & Visors 136-143 

Goggles - Non Vented 143 

Goggles - Vented 142 

Grip-it Oil Gloves 43 

GVS Elipse - Reusable Respirators 

- Half Masks 102-103 

H 

Hair Nets 21 

Half Mask Respirators 101-107 

Hand Protection 37-67 

Hazard Workwear 3-21 

Head Protection 147-155 

Hearing Protection 157-171 

Heart Restart Kits 189 

Heat Resistant Gloves 66 

Helly Hansen Footwear 72 

Helly Hansen Polo Shirts 24 

Helly Hansen Jackets 27-28 

Helly Hansen Pants 26 

Helmet Accessories 152 

Hi-Visibility Clothing 4-7 

Honeywell Safety Faceshields 138-139 

Honeywell Gloves 38-40 

Howard Leight Hearing Protection 158-164 

HSE Fisrt Aid Kits 190-193 

Hybrid Goggles/Spectacles 137 

198

Index 

Index 

I 

Impacto Gloves 50 

Impacto Knee Pads 35 

Insoles 91 

J 

Jackets 28 

Jackets, Fleece 27 

Jackets, Hi-Visibility 4-5 

JSP Evolite Safety Helmet 150 

JSP Force 8 Respirator 106 

JSP Helmet Accessories 152 

JSP SpringFit Respirator 100 

Juba Hand protection 39-67 

Jupiter Powered Air Respirator 114 

K 

KeepSAFE Coveralls 29 

KeepSAFE Gloves 38-67 

KeepSAFE Hi-Visibility Clothing 4-7 

KeepSAFE Safety Eyewear 128-142 

KeepSAFE Safety Helmets 150 

Kevlar Gloves 66 

Knee Pads 35 

L 

Lab Coats 19 

Ladies Safety Footwear 88-90 

Ladies Workwear 30-31 

Lanyards 174-175 

Latex Coated Gloves 44 

Lens Cleaning Accessories 144-145 

Lightweight Gloves 38 

M 

Magnum Safety Footwear 76 

Mechanics Gloves 49 

Mob Caps 21 

Modern Safety Spectacles 127-133 

Moldex Ear Muffs 167 

Moldex Hearing Protection 159-167 

Moulded Ear Plugs 162 

N 

Nitrile Coated Gloves 39-42 

Nitrile Disposable Gloves 62 

O 

Overshoe - Safety 19-21 

Overboots - Tyvek 19 

Oversleeves 19-20 

Overspecs 134-135 

P 

Peltor Ear Defenders 168-171 

Plasters 188-196 

Polo Shirts 24 

Polyco Grip it Gloves 43 

Polyco hand protection 38-65 

Premium Eyewear 124-126 

Prescription Eyewear 128 

PU Coated Gloves 38 

Pulsar Flame Resistant Clothing 13 

Puncture Resistant Gloves 49 

PVC Gauntlets 46 

Pyramex Eyewear 133-135 

R 

Radio Headsets 168 

Rail Hi-Visibility Clothing 8-11 

Rainwear . . . . . . . . . . . . . . . . . 32-33 

Respair Disposable Respirators 98 

Respirators 93-121 

Respiratory Protection 93-121 

Reusable Respirators 

- Half Masks 101-109 

Reusable Respirators 

- Full Face Masks 107-108 

RIS-3279 High Visibiity Clothing 8-11 

Rigger Boots 80 

Rigger Gloves 47 

Rock Fall Safety Footwear 70-90 

S 

S1P Safety Boots 79 

S3 Safety Boots 70-78 

Safety Eyewear 123-145 

Safety Footwear 69-91 

Safety Goggles 136-143 

Safety Harnesses 174-175 

Safety Helmets 148-155 

Safety Lanyards 174-175 

Safety Shoes 69-91 

Safety Trainers 82-83 

Sala Fall Arrest 174-175 

Scott Respirators 106-108 

Shirts, T 24 

Shoe and Helmet Sanitiser Spray 91 

Shoe Polish 91 

Shoes Safety 69-91 

Shorts 26 

Skytec Aria Gloves 60 

Skytec Gloves 61 

Socks 91 

Specialist Handling Gloves . . . . . . . . 48-50 

Specialist Safety Helmets 151 

Spectacle Cases 144-145 

Stanley Gloves 51 

Swarfega 184 

T 

Thermal Gloves 67 

Traditional and Overspecs 134-135 

Trousers, Work 25-26 

T-Shirts 24 

Tuf Footwear 72-86 

Tychem Coveralls 15-17 

Tyvek Accessories 19 

Tyvek Coveralls 15-17 

U 

Uvex Footwear 69-89 

Uvex Gloves 46-48 

Uvex Hearing Protection 160-165 

Uvex Safety Eyewear 125-143 

Uvex Safety Eyewear Accessories 144 

Uvex Safety Spectacles & Goggles 125-143 

V 

Versaflo Supplied Air Respirator 111-116 

Vinyl Disposable gloves 20, 56 

Visitor Lab Coats 20 

Visors 136-139 

W 

Waistcoats, Hi-Visibility 6-7 

Washroom 178-184 

Water Resistant Boots 70-75 

Weather Wear 32-34 

Welding Gauntlets 66 

Welding Protection 140 

Welding Safety Eyewear & Helmets 140-141 

Wellington Boots 86-87 

White Safety Footwear 84, 86-87 

Workwear 25-35 

199

Can’t see what 

you’re looking for? 

1000s MORE 

PRODUCTS AVAILABLE 

ON REQUEST… 

We offer easy access to the leading 

PPE brands featuring the latest 

innovations and legislative compliance 


200

PPE 

WORKWEAR 

LEISURE WEAR 

EMBROIDERY SERVICE 

JANITORIAL SUPPLIES 

SAFETY SIGNS 

FIRST AID 

CELEBRATING 50 YEARS 

AS A FAMILY BUSINESS 

Phoenix Accessories (Safety) Ltd, Waterloo Mills,Waterloo Road, Pudsey, Leeds. LS28 8DQ 

Telephone: 0113 257 4475 or 0113 255 5415 Fax: 0113 255 0208 Email: sales@phoenix-safety.co.uk

Phoenix Safety Head to Toe Protection Catalogue 2021

Create successful ePaper yourself

Delete template?

Save as template?