Keep Your Production Moving And Improving - UK

FOR MECHANICAL MAINTENANCE 

AND UPGRADES, WE’RE BY YOUR SIDE 

KEEP YOUR 

PRODUCTION 

MOVING & 

IMPROVING 

uk.rs-online.com 

We’re by your side

SKF 

Food Line Deep Groove Bearings 

• Stainless steel bearings suitable for a wide 

range of food and beverage applications 

• Corrosion resistant and can accommodate radial 

loads and axial loads in both directions 

• Pre-lubricated with grease registered by NSF as category 

H1 - compliant with FDA and EC recommendations 

Food Line Y-Housings and 

Y-Bearing Units 

• Thermoplastic composite material housing block 

• Stainless steel bearing pre-lubricated with a nontoxic 

food-grade grease - NSF H1 registered 

• Corrosion resistant under most wash-down conditions 

KEEP YOUR 

PRODUCTION 

MOVING & 

IMPROVING 

FOR MECHANICAL MAINTENANCE AND 

UPGRADES, WE’RE BY YOUR SIDE. 

Whether you are responsible for maintaining 

production equipment on a day-to-day basis, 

or focused on longer term process improvement, access 

Contents 

3. BEARINGS 

6. MECHANICAL POWER TRANSMISSION 

9. BELTS 

12. TECHNICAL SUPPORT 

13. PNEUMATICS 

16. ROLLER CHAIN 

125-1229 10mm I.D, 26mm O.D - W 6000-2RS1/VP311 £12.33 








System 24 Automatic Lubricator 

• Save time with the SKF SYSTEM 24 single-point automatic 

lubricator, which provides grease automatically in place of 

a manual grease-gun application 

• Choice of 60ml & 125ml capacities, 

with a 'Food Safe' and high 

temperature options. 

125-2426 20mm I.D, L. 126mm, H. 33.3mm, D. 32mm, M10 

- SYWK 20 YTH 


- SYWK 25 YTH 


- SYWK 30 YTH 


- SYWK 35 YTH 


- SYWK 40 YTH 

Portable Induction Bearing Heaters 

£49.02 

£57.25 

£63.00 

£77.29 

£88.68 

• The TWIM 15 portable induction heater is 

designed to heat up roller bearings prior to 

mounting with an interference fit onto a shaft 

• Heating the bearing causes it to expand, which eliminates 

the need to use excessive force during installation 

• Generating a 90°C (162°F) temperature difference 

between the bearing and shaft is sufficient to aid fitment 

to the right parts, technical support, guidance and 

18. RS PRO 

services is fundamental to getting the job done. 

23. ABB 

Our extensive range of mechanical parts are available 

in stock to support you, along with a host of supporting 

tools, materials, equipment and services. Whichever 

24. PPE 

maintenance strategy you are following: predictive, 

planned, reactive or quite possibly a combination of the 

25. TEST & MEASUREMENT 

three, we're here for you. Our ever-expanding mechanical 

power transmission and fluid power offer, consumables and 

28. TOOLS 

tools, are in this guide. All from the brands you trust. Take 

a look and see how we can help you get the job done. 

33. DESIGNSPARK 

34. POWER TOOLS 

506-725 Multi-purpose, LAGD 125/WA2 £19.82 

703-3237 Multi-purpose, LAGD 60/WA2 £24.45 

703-3234 High temp. LAGD125/HMT68 £31.42 

197-7646 TWIM 15/230V £1,828.98 

37. LED LENSER 

134-7563 Food Suitable, LAGD 125/FP2 £25.25 

197-7645 TWIM 15/110V £1,828.98 

M A I N T A I N & I M P R O V E 

38. CONSUMABLES 


3

5 


4 

BEARINGS & HEATERS 


137-1582 10mm I.D; 26mm O.D; 8mm W - 6000-C-2Z-C3 £3.66 

137-1645 12mm I.D; 32mm O.D; 10mm W - 6201-C-2Z £3.88 

137-1591 15mm I.D; 32mm O.D; 9mm W - 6002-C-2Z-C3 £4.41 

137-1596 17mm I.D; 35mm O.D; 10mm W - 6003-2Z £4.65 


137-1719 25mm I.D; 62mm O.D; 17mm W - 6305-2Z £9.10 

137-1667 30mm I.D; 62mm O.D; 16mm W - 6206-2Z £8.71 


137-1450 40mm I.D; 90mm O.D; 23mm W - 6308-2Z £24.91 

Deep Groove Double Shielded 

Ball Bearings 

• Versatile self-retaining bearings 

• Solid outer rings, inner rings and ball and cage assemblies 

• Durable in operation and easy to maintain 

• Gap seals on both sides, and greased using a high-quality 

grease, lubricated for life and suitable for high speeds 

137-1488 20mm I.D; 47mm O.D; 15.25mm W - 30204-A £14.31 

137-1497 25mm I.D; 52mm O.D; 16.25mm W - 30205-A £15.86 

137-1501 30mm I.D; 55mm O.D; 17mm W - 32006-X £18.70 

137-1499 30mm I.D; 62mm O.D; 17.25mm W - 30206-A £17.40 

137-1485 35mm I.D; 72mm O.D; 18.25mm W - 30207-A £21.01 

137-1500 40mm I.D; 80mm O.D; 19.75mm W - 30208-A £26.16 

137-1502 50mm I.D; 80mm O.D; 20mm W - 32010-X £31.35 

Tapered Roller Bearings 

• High radial and axial load carrying capacity 

• Large usable speed range 

• Ensures a precise and rigid shaft guidance system 

174-1120 16mm KRV16-PP-A £33.54 

174-1121 19mm KRV19-PP-A £34.99 

174-1123 26mm KRV26-PP-A £39.09 

174-1124 30mm KRV30-PP-A £46.56 

174-1125 35mm KRV35-PP-A £55.04 

174-1126 40mm KRV40-PP-A £64.75 

194-7214 52mm KRV52-PP-A £85.70 

Stud Rollers KRV Series 

• Stud type track rollers with heavy-section roller 

raceway and stud fixing thread and lubrication hole 

• Can support high radial loads as well as axial loads 

arising from slight misalignment and skewed running 

• Suitable for applications such as cam gears, bed 

ways and conveying equipment 

183-2642 BH-02B/UK - 10-145mm £723.47 

183-2646 BH-02C/UK - 20-145mm £795.63 

183-2649 BH-02S/UK - 20-205mm Automatic control £1,120.45 

Bearing Heaters 

• The fast, flexible and reliable way to heat bearings 

and ensure proper installation 

• Portable, powerful (725W) and options for bearing 

IDs from 10mm to 205mm 

• Automatic model monitors temperature via 

thermostat which is placed on the bearing inner race 

(preset to 121˚C) 

175-3589 30mm bore - CRBHV3010AUUC1 £75.94 










Crossed Roller Bearing 

• Both inner and outer rings have solid one-piece construction 

that minimizes mounting errors and allows these bearings to 

easily achieve high rigidity and high accuracy 

• Separators incorporated between the cylindrical rollers allow 

for smooth rotation movement, ideal for handling complex 

loads while contact seals stop any 

ingress from dirt or dust 

• Suitable for high movement 

applications such as robotics, 

precision motors, pick & place and 

machine tools 

175-3612 20mm bore -CRBFV2012ATUUC1 £134.97 







Mounting Holed Crossed Roller Bearing 

• Solid one-piece construction with mounting holes for 

maximum application flexibility while achieving high rigidity 

and high accuracy 

• Separators incorporated between the cylindrical rollers allow 

for smooth rotation movement, ideal for handling complex 

loads while contact seals stop any ingress 

from dirt or dust 

• Reduces additional machining cost 

and saves time when installing / 

assembling machinery 

• Suitable for high movement 

applications such as robotics, 

precision motors, pick & place and 

machine tools 

High Rigidity Type Crossed 

Roller Bearings 

The integrated structure of the inner and outer rings 

allow these Crossed Roller Bearings to provide both 

compactness and high rigidity. They are suited for 

applications with high rotational speed due to their 

smooth rotation. 

CRBH ... A 

Crossed Roller Bearings with mounting holes on both the inner 

and outer rings facilitate installation into your machines and 

equipment. The mounting holes make them less dependent 

upon peripheral structures such as the housing or fixing plate, 

so surrounding parts of the bearing can be made compact. 

CRBF ... A 

Both inner and outer rings have a solid one-piece construction (non-separable). Therefore, high accuracy and high rigidity are achieved, and mounting errors can be minimized. 

Separators are incorporated between cylindrical rollers for smooth rotation. 

Examples of use 

Heavy-duty transport robot 

Welding robot 

Pick-up robot 

Separator 

Mounting holes 

Size 

Seal 

Clearance 

Accuracy class 

Accuracy 

High 

Shaft dia. 20-300 mm 

Yes 

None 

C2 

T1 

C1 

(Preload) (Slight) (Medium) 

No symbol 

(Normal) 

Class 4 Class 2 

Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 

Horizontal articulation 

Joint swivel part 

High Rigidity Type Crossed Roller Bearing CRBH … A 

Smooth, high speed movement is required to 

achieve high tact. 

Structure 

Location used 

Required 

performance 

Model used 

Vertical articulation 


Accurate positioning is a must, requiring 

high-rigidity bearings with high rotational accuracy 

and low deflection. 

Mounting Holed Type High Rigidity Crossed Roller Bearing CRBF … A 


Base swivel part 

Used in the area receiving the highest load; 

this application requires not only high load 

capacity but also compactness. 

Standard Type Crossed Roller Bearing CRB 








CRBH ... A 






CRBF ... A 





Welding robot 

Pick-up robot 

Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 






Structure 

Location used 

Required 

performance 

Model used 




















CRBH ... A 






CRBF ... A 





Welding robot 

Pick-up robot 

Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 






Structure 

Location used 

Required 

performance 

Model used 




















CRBH ... A 






CRBF ... A 





Welding robot 

Pick-up robot 

Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 






Structure 

Location used 

Required 

performance 

Model used 




















CRBH ... A 






CRBF ... A 





Welding robot 

Pick-up robot 

Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 






Structure 

Location used 

Required 

performance 

Model used 




















CRBH ... A 






CRBF ... A 





Welding robot 

Pick-up robot 

Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 






Structure 

Location used 

Required 

performance 

Model used 




















CRBH ... A 






CRBF ... A 





Welding robot 

Pick-up robot 

Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 






Structure 

Location used 

Required 

performance 

Model used 




















CRBH ... A 






CRBF ... A 





Welding robot 

Pick-up robot 

Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 






Structure 

Location used 

Required 

performance 

Model used 




















CRBH ... A 






CRBF ... A 





Welding robot 

Pick-up robot 

Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 






Structure 

Location used 

Required 

performance 

Model used 




















CRBH ... A 






CRBF ... A 





Welding robot 

Pick-up robot 

Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 






Structure 

Location used 

Required 

performance 

Model used 




















CRBH ... A 






CRBF ... A 





Welding robot 

Pick-up robot 

Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 






Structure 

Location used 

Required 

performance 

Model used 




















CRBH ... A 






CRBF ... A 





Welding robot 

Pick-up robot 

Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 






Structure 

Location used 

Required 

performance 

Model used 




















CRBH ... A 






CRBF ... A 





Welding robot 

Pick-up robot 

Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 






Structure 

Location used 

Required 

performance 

Model used 




















CRBH ... A 






CRBF ... A 





Welding robot 

Pick-up robot 

Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 






Structure 

Location used 

Required 

performance 

Model used 




















CRBH ... A 






CRBF ... A 





Welding robot 

Pick-up robot 

Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 






Structure 

Location used 

Required 

performance 

Model used 




















CRBH ... A 






CRBF ... A 





Welding robot 

Pick-up robot 

Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 






Structure 

Location used 

Required 

performance 

Model used 



Accurate positioning is a mu 

high-rigidity bearings with h 


Mounting Holed Type High Rigidity C 














CRBH ... A 

Crossed Roller Bear 

and outer rings faci 

equipment. The mo 

upon peripheral stru 

so surrounding parts 

CRB 

Both inner and outer rings have a solid one-piece construction (non-separable). Therefore, high accuracy and high rigidity are achieved, and mount 


Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

Sha 

Yes 

T1 

(Preload) 

Cla 

Class 0 

Va 








CRBH ... A 






CRB 



Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

Sha 

Yes 

T1 

(Preload) 

Cla 

Class 0 

Va 








CRBH ... A 






CRB 



Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

Sha 

Yes 

T1 

(Preload) 

Cla 

Class 0 

Va 








CRBH ... A 






CRB 



Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

Sha 

Yes 

T1 

(Preload) 

Cla 

Class 0 

Va 








CRBH ... A 






CRB 



Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

Sha 

Yes 

T1 

(Preload) 

Cla 

Class 0 

Va 








CRBH ... A 






CRB 



Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

Sha 

Yes 

T1 

(Preload) 

Cla 

Class 0 

Va 








CRBH ... A 






CRB 



Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

Sha 

Yes 

T1 

(Preload) 

Cla 

Class 0 

Va 








CRBH ... A 






CRB 



Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

Sha 

Yes 

T1 

(Preload) 

Cla 

Class 0 

Va 








CRBH ... A 






CRB 



Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

Sha 

Yes 

T1 

(Preload) 

Cla 

Class 0 

Va 








CRBH ... A 






CRB 



Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

Sha 

Yes 

T1 

(Preload) 

Cla 

Class 0 

Va 








CRBH ... A 






CRB 



Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

Sha 

Yes 

T1 

(Preload) 

Cla 

Class 0 

Va 








CRBH ... A 






CRB 



Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

Sha 

Yes 

T1 

(Preload) 

Cla 

Class 0 

Va 








CRBH ... A 






CRB 



Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

Sha 

Yes 

T1 

(Preload) 

Cla 

Class 0 

Va 








CRBH ... A 






CRBF ... A 





Welding robot 

Pick-up robot 

Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 






Structure 

Location used 

Required 

performance 

Model used 




















CRBH ... A 






CRBF ... A 





Welding robot 

Pick-up robot 

Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 






Structure 

Location used 

Required 

performance 

Model used 




















CRBH ... A 






CRBF ... A 





Welding robot 

Pick-up robot 

Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 






Structure 

Location used 

Required 

performance 

Model used 




















CRBH ... A 






CRBF ... A 





Welding robot 

Pick-up robot 

Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 






Structure 

Location used 

Required 

performance 

Model used 




















CRBH ... A 






CRBF ... A 





Welding robot 

Pick-up robot 

Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 






Structure 

Location used 

Required 

performance 

Model used 




















CRBH ... A 






CRBF ... A 





Welding robot 

Pick-up robot 

Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 






Structure 

Location used 

Required 

performance 

Model used 




















CRBH ... A 






CRBF ... A 





Welding robot 

Pick-up robot 

Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 






Structure 

Location used 

Required 

performance 

Model used 




















CRBH ... A 






CRBF ... A 





Welding robot 

Pick-up robot 

Separator 


Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Size 

Seal 

Clearance 


Accuracy 

High 


Yes 

None 

C2 

T1 

C1 


No symbol 

(Normal) 


Class 5 

Class 6 

Class 0 

Variation 

Structure 

Location used 

Required 

performance 

Model used 

Model used 

Required 

performance 

Location used 

Structure 






Structure 

Location used 

Required 

performance 

Model used 




















CRBH ... A 






CRBF ... A 

Both inner and outer rings have a solid one-piece construction (non-separable). Therefore, high accuracy and high rigidity are achie

BELTS & COUPLINGS 

MECHANICAL LINEAR MOTION 

Double Loop Flex-P Couplings 

Wrapped V-Belts 

Frelon Self Lubricating Bushes 

Linear Plain Bearing Units - Closed 

• Maintenance free couplings using a flexible 

Hytrel element and stainless steel hub 

• Exceptional flexibility in all three directions, 

radial, angular and axial 

• Suitable for most lower load applications 

(up to 18Nm) and speeds up to 3000rpm 

• Precision made, wrapped Vee belts, 

using a special stiff-yet-flexible 

crack resistant base for long life 

• Anti-static, heat, oil and abrasion resistant 

• Full range of A, B and Z profiles available from stock 

• Frelon’ liner resists most chemicals and 

withstands vibration and shock 

• Suitable for rotary motion 

• Silent, self-lubricating operation 

• Anodised aluminium housing 

• Liner JUM-01 as standard 

• Recommended tolerance for shaft: h6 - h10 

472-070 A22, 13x560mm £2.16 

809-0723 Size 10, 2mm Bore, M3 Grub Screw £11.79 

471-960 A23, 13x585mm £2.16 


471-922 A25, 13x630mm £2.24 


471-887 A26, 13x660mm £2.32 


471-562 A28, 13x710mm £2.28 


471-566 A29, 13x730mm £2.44 


472-042 A32, 13x813mm £2.61 


472-032 A33, 13x838mm £2.69 


472-010 A37, 13x940mm £3.01 

Synchrobelt HTD timing belts 

• Designed for high torque applications 

• Moderately oil resistant, non-ageing and ozone-resistant 

• Resistant to temperatures from -20°C to +100°C 

Jaw couplings 

• Large torque capacity and a balanced design 

• Provide damping of impulse loads 

• Minimise shock to the motor and 

other sensitive equipment 

243-8053 8mm I.D; 16mm O.D; 25mm L £15.60 

243-8069 10mm I.D; 19mm O.D; 29mm L £15.86 

217-9697 12mm I.D; 22mm O.D; 32mm L £15.78 

217-9704 16mm I.D; 26mm O.D; 36mm L £19.40 

217-9710 20mm I.D; 32mm O.D 45mm L £23.07 

617-4696 12mm I.D. load rating 960N dyn, 6,720N static £31.11 

617-4703 16mm I.D. load rating 1,440N dyn, 10,080N static £33.60 



217-9726 25mm I.D; 40mm O.D 58mm L £31.30 


Linear Miniature Guide Blocks 

Linear Ball Bearing Units 

475-0333 400mm length; 15mm width; 5mm pitch; 80 teeth £6.71 




475-0670 1.2m length; 20mm width; 8mm pitch; 150 teeth £15.25 

423-1674 4mm bore, 19.1mm O.D., 27.2mm length £11.25 

423-1719 6mm bore,25.4mm O.D., 11.9mm length £13.80 


423-1769 10mm bore,33.3mm O.D., 44.5mm length £17.53 


• Lightweight linear guide ways suitable for use 

with smaller equipment or applications 

• All the material for block and rail, including rolling 

balls and ball retainers, is made from stainless steel 

• Can sustain loads from all the directions, high rigidity 

and accuracy - full range of rails available 

• Light-weight, aluminium housing 

which is extremely compact 

• Optimised to provide high strength and stiffness 

• With integral double lip seals (2LS models) 


701-9137 14mm bore,41.3mm O.D., 53mm length £20.06 


701-9146 16mm bore, 41.3mm O.D., 53mm length £20.06 


701-9149 20mm bore,41.3mm O.D., 53mm length £20.06 

Elastomer Coupling System 

• A soft-polymer elastomeric coupling which is requires no lubrication and is able to cope with, 

and correct for considerable mis-alignment. 

• The two piece construction allows for quick removal and replacement without the need to 

disturb the hubs, shaft or remove equipment from its mountings 

808-7207 Coupling element, VS110 £141.91 




808-7232 Steel hub, V110 £46.26 

808-7241 Steel hub, V125 £53.58 

808-7244 Steel hub, V130 £61.70 

808-7248 Steel hub, V150 £87.93 

176-6655 5mm rail, W. 12mm, L. 16mm £66.06 

176-6660 7mm rail, W. 17mm, L. 22.5mm £49.54 

176-6665 9mm rail, W 20mm, L. 28.9mm £57.75 

176-6673 12mm rail, W. 27mm, L. 34.7mm £69.03 

176-6676 15mm rail, W. 32mm, L. 42.1mm £70.08 

176-6683 15mm rail, W. 34mm, L. 61.4mm £72.57 

176-6690 20mm rail, W, 44mm, L. 77.5mm £88.89 

176-6695 23mm rail, W. 48mm, L. 84mm £110.83 

176-6699 28mm rail, W. 60mm, L. 97.4mm £126.83 

284-9352 LUHR 12 680N dynamic load rating £44.99 

284-9425 LUHR 12-2LS 680N dynamic load rating £46.92 









6 

7

MECHANICAL CONVEYING 

Stud Type Track Rollers 

• Needle rollers with concentric cam follower and crowned 

running surface – gives better stress distribution 

• Polyamide 66 axial slide rings – reduce 

friction and increase service life 

• Temperature range -30°C to +100°C 

514-180 KR16-PPA 16mm x 11mm £32.17 

514-203 KR19-PPA 19mm x 11mm £33.61 

514-192 KR22-PPA 22mm x 12mm £35.44 

513-834 KR26-PPA 26mm x 12mm £37.49 

513-824 KR30-PPA 30mm x 14mm £44.61 

513-828 KR32-PPA 32mm x 14mm £46.16 

514-215 KR35-PPA 35mm x 18mm £52.71 

514-219 KR40-PPA 40mm x 20mm £62.82 

514-209 KR47-PPA 47mm x 24mm £79.65 

514-041 KR52-PPA 52mm x 24mm £83.26 

513-979 KR62-PPA 62mm x 29mm £61.48 

Series 2500 Omniwheels 

• Ingeniously simple design with ‘snap-in function’ 

of individual Omniwheels 

• Allows construction of a system, capable of 

conveyance in any horizontal direction 

• Great for moving heavy items 

• Quick and easy to assemble 

• Robust and corrosion resistant 

• Polyamide wheel body and 

spool, stainless steel journal 

408-542 48mm diameter £2.38 

408-536 80mm diameter £4.92 

Motorised Drive Rollers 

• Roller with integral motor - voltage range 16 -28Vdc 

• M8 threaded spindles (bolt / bracket supplied) 

• Grooved to provide drive to nine slave rollers 

• Quiet running with a noise level of approx. 47 dB(A) 

Stainless Steel Ball Transfer Units 

• Pre-lubricated units designed to move 

or transfer loads in all directions 

• Flange fitting has lower friction movement, 

while bolt fitting has large support area 

• Euro ball version has toughened steel main bearing cup 

687-865 Flange 19mm ball 25kg £6.81 

687-871 Flange 25mm ball 55kg £9.86 

687-916 Bolt 19mm ball 25kg £8.51 

687-922 Bolt 25mm ball 55kg £11.08 

687-972 Euro 15mm ball 45kg £7.56 

Stainless Steel Conveyor Roller 

• Used in a variety of dynamic material handling sectors 

• Available in a variety of finishes, diameters, and designs 

• Polyamide end caps and stainless steel bearings 

254-8728 300mm £28.08 

254-8734 350mm £30.34 

254-8740 400mm £32.59 

254-8762 450mm £34.86 

254-8778 500mm £37.10 

254-8784 550mm £39.37 

254-8790 600mm £41.62 

437-2797 50mm diameter x 300mm long £190.24 



Maintenance-Free 

Wedge Belts 

• RED POWER 3 wedge-belts are 

designed for long-life, maintenancefree 

operation, even when 

transmitting up to 50% more power 

than standard belts. 

• Extended temperature range 

-30 °C to +100 °C 

• Choose from over 60 sizes in stock 

- visit RS Online and search 

'optibelt red power' 

178-0759 1.25m SPZ 1250 RP £9.98 

178-0760 1.32m SPZ 1320 RP £10.51 

178-0692 1.25m SPA 1250 RP £13.42 

178-0696 1.5m SPA 1500 RP £16.30 

178-0703 1.8m SPA 1800 RP £19.02 

178-0705 2.0m SPA 2000 RP £21.46 

178-0708 2.24m SPA 2240 RP £23.74 

178-0762 2.36m SPZ 2360 RP £18.29 

ALPHA Torque Timing Belts 

• T10 profile Polyurethane timing belts offering 

maintenance-free, extended operational life 

• Steel wire cord construction for increase torque capacity 

• Full range of sizes & lengths available from stock 

- just visit RS online and search 'Optibelt T10' 

175-2978 W16mm, L 370mm £9.78 

175-2980 W16mm, L 440mm £9.87 

175-2981 W16mm, L 500mm £10.47 

175-2999 W16mm, L 1010mm £18.29 

175-3011 W16mm, L 2250mm £40.28 

175-3022 W25mm, L 690mm £18.24 

175-3023 W25mm, L 700mm £18.47 

175-3034 W25mm, L 1080mm £28.11 

175-3046 W25mm, L 1960mm £46.21 

SK Series Wedge Belt 

• High-performance wrapped wedge 

belts, manufactured in Europe 

• Precision tolerances for exceptional 

consistency & reliability 

• Can be combined in sets without matching 

OPTIBELT 

136-7220 Length 862mm; 9.7mm width; 8mm height; SPZ £4.52 

136-7229 Length 1142mm; 9.7mm width; 8mm height; SPZ £6.34 

136-7256 Length 1312mm; 12.7mm width; 10mm height; SPA £10.18 

136-7280 Length 1340mm; 16.3mm width; 13mm height; SPB £14.12 





Tension Tester 

• Correctly tensioned belts 

last longer and run more 

efficiently, Opti TT checks the 

tension of belts by measuring 

their frequency of vibration 

• Ideal for quickly and 

easily checking the 

tension of V-belts, ribbed 

belts and timing belts 

• Large, easy-to-read backlit 

colour screen, USB charging 

and 3 hour battery life. 

Supplied in carry case 

178-0775 £527.49 

Laser Point II Belt Alignment Tool 

• The laser pointer makes it 

quicker and easier to adjust 

belt drives via 3 target 

magnets on the pulley 

• Measurement of 

parallel and angular 

misalignment with a 

high level of accuracy 

• Supplied in a practical 

service box and includes 

target magnets, distance 

discs and batteries 

178-0774 £345.49 



8 

9

BOSCH REXROTH 

Compact Linear Sets With Seals 

• Precision aluminium housing, closed type 

• Integrated wiper seals with initial 

Dynalub 510 lubrication 

• Normal radial clearance 

Linear Runner Blocks and Rails 

• Runners blocks and rails made with rust and acid 

resistant material similar to ISO 683-17 / EN 10088 

• Smooth running thanks to optimal ball recirculation and 

precise track geometry and fitted with low-friction seals 

• High load capacity in all directions of load application 

If it runs, we can help it run better. Gates is a global leader 

in power transmission products and services. We serve customers 

across industries, bringing relentless innovation, and uncompromising 

quality to every product we make. Our reputation is built on over a century 

of experience, but everything we do is geared towards powering the future. 

409-400 12mm I.D. load rating 810N dyn, 490N static £48.25 

409-397 16mm I.D. load rating 1,050N dyn, 570N static £32.32 

409-404 20mm I.D. load rating 1,410N dyn, 900N static £55.25 




Closed Super Linear Bushings 

• Balls made of rolling bearing steel, ball retainer 

with outer sleeve made of polyamide and two 

integrated wiper seals 

• Hardened steel segmental load bearing plates 

with machined ball guide grooves 

• Offers shaft deflection and self-alignment 

up to 0.5° 

• High travel speeds of up to 5m/s 

409-595 Linear guide carriage, 9mm - R044289401 £57.82 



409-583 9mm x 200mm rail £51.32 

409-674 9mm x 400mm rail £82.16 

409-561 12mm x 200mm rail £53.90 

409-567 12mm x 400mm rail £86.31 

409-577 12mm x 600mm rail £118.76 

409-573 12mm x 990mm rail £179.60 

409-713 15mm x 200mm rail £70.79 

409-668 15mm x 400mm rail £115.47 

409-678 15mm x 600mm rail £160.16 

409-602 15mm x 990mm rail £240.65 

Conveyor Rollers 

• Choice of plastic or galvanised 

steel 40mm rollers with an 

8mm spindle diameter 

• Can be used with roller 

carrier or roller mounts 

(see 665-7242) 

409-353 12mm I.D; 22mm O.D; 32mm L; 1,140N 

dynamic load rating 

£22.49 

Helping keep industry running, from process and specialty 

manufacturing to mining, and everything in between. Our 

industrial belt and power transmission solutions help the world’s 

leading companies outperform the competition. 

409-371 16mm I.D; 26mm O.D; 36mm L; 1,400N 


409-416 20mm I.D; 32mm O.D; 45mm L; 2,470N 


409-410 25mm I.D; 40mm O.D; 58mm L; 4,820N 


409-347 30mm I.D; 47mm O.D; 68mm L; 5,860N 


409-337 40mm I.D; 62mm O.D; 80mm L; 10,070N 


£27.14 

£30.81 

£39.72 

£45.93 

£63.42 

665-7270 40mm x 225mm - Plastic £6.57 

665-7255 40mm x 225mm - Steel £9.40 

665-7273 40mm x 325mm - Plastic £7.21 

665-7264 40mm x 325mm - Steel £10.14 

665-7277 40mm x 425mm - Plastic £7.98 

665-7267 40mm x 425mm - Steel £10.87 

665-7286 40mm x 525mm - Plastic £8.70 

665-7261 40mm x 525mm - Steel £11.61 

Full range coming soon to the RS offer… 


10 

11

FESTO PNEUMATICS 

DSBC Profile Cylinders 

• ISO 15552 standard makes it Interchangeable 

with other cylinder makes 

• Manual adjust cushioning allows fine tuning to application 

• Robust with more than 20 km design 

stroke life, high performance and 

multiple configurable options 

DSNU Roundline Cylinders 

• ISO 6432 standard makes them fully 

interchangeable with other cylinder makes 

• Manual adjust cushioning allows fine tuning to application 

• High performance and robust with 

more than 10 km design stroke life 

• Multiple configurable options 

PRODUCT SUPPORT 

WE KNOW HOW IMPORTANT ADVICE AND TECHNICAL SUPPORT IS TO OUR 

CUSTOMERS. WE UNDERSTAND THAT SOMETIMES YOU NEED TO ASK A QUESTION OR 

CLARIFY A DIMENSION, HELPING YOU TO FIND THE PERFECT PRODUCTION SOLUTION. 

121-5187 63mm Bore, 100mm Stroke, DSBC-63-100-PPVA-N3 £164.22 




FR & FRL Assemblies 

• Filter regulator (FR) and a pressure gauge - 

40 μm filter, lockable regulator head, plastic 

bowl and manual condensation drain 

• Lubricator is proportional 

standard mist lubricator 

• Direction of flow: 

from left to right 

• Operating pressure 

1.5 bar to 14 bar 

121-4692 25mm Bore, 80mm Stroke, DSNU-25-80-PPV-A £58.48 





Transparent Flexible Tubing PUN-H-T 

• Flexible, high performance transparent polyurethane tube 

which is hard wearing, hydrolysis resistant & food safe 

• Ideal for those looking for a moisture and bacterial 

resistant tubing which aids maintenance as it's easier 

to spot water, oil or particulates in the tubing line 

• Can be exposed to water up to 50°C and uses an FDA 

listed material - ideal for food & beverage packaging 

or processing machinery 

That’s why we continue to provide product support via our team of qualified engineers, as well 

as access to product support resources - online, by phone or through our RS Local branches. 

Never get stuck again. 

Our Customer Service team can help understand your needs offering product 

support or directing your enquiry to a qualified engineer – call 03457 201 201 

Speak to a live chat member via our website for help in finding 

products and technical information 

Access over 500,000 technical data sheets available at product level, 

saving you time and giving you 24/7 technical information 

Obtain additional technical data from a range of brands via our Designspark Product 

Data Library which contains datasheets, 3D models, application notes and more. 

136-7052 G½" F/R + On/Off Valve £157.36 

136-7051 G¼" F/R + On/Off Valve £119.79 

136-6743 G½" FR/L 0.5-12 bar, 40 micron £137.46 

136-6744 G¼" FR/L 0.5-12 bar, 40 micron £103.12 

Pneumatic Fittings 

• Male threaded tube connectors with 

high leak integrity sold in a pack of ten 

• Easy tube insertion and removal 

• Examples from a complete range 

of FESTO fittings 

available from stock 

121-6219 R1/8 to 4mm Tube £16.32 

121-6221 R1/8 to 6mm Tube £29.09 

121-6223 R1/8 to 8mm Tube £35.59 

121-6214 R¼ to 6mm Tube £49.78 

121-4318 R¼ to 8mm Tube £36.30 

121-6209 R¼ to 10mm Tube £55.81 

136-7103 Blue, 6mm £46.71 

136-7104 Blue, 8mm £67.40 

136-7105 Blue, 10mm £101.11 

181-6069 Red, 6mm £46.71 

181-6074 Red, 8mm £67.40 

181-6078 Red, 10mm £101.11 

181-6071 Green, 6mm £46.71 

181-6075 Green, 8mm £67.40 

181-6079 Green, 10mm £101.11 

181-6072 Yellow, 6mm £46.71 

181-6076 Yellow, 8mm £67.40 

181-6068 Black, 6mm £46.71 

181-6073 Black, 8mm £67.40 

181-6077 Black, 10mm £101.11 



12 

13

NORGREN PNEUMATICS 

PNEUMATIC CONTROL & EFFICIENCY 

ISOLine 15552 Cylinders 

• Examples from our range of PRA/802 series 

cylinders from Norgren that offer 32-320mm 

bore and stroke lengths up to 500mm 

• Double acting, with high performance 

adaptive cushioning system 'ACS' 

164-7046 50mm stroke, 32mm bore - PRA/802032/M/50 £85.80 





R07 Pressure Regulators 

• Miniature R07 regulator offers a 

compact design, a flow gauge port 

and can be disassembled without tools 

• Uses as a snap action knob lock 

which locks pressure when pushed in 

• Panel or bracket mounted 

with Zinc alloy body 

122-649 G 1/8" £25.30 

122-655 G ¼" £25.30 

Pneumatic Valves 

• The V61 series control valves have a high flow rate of 1300L/min 

• G¼in port connection, made of aluminium and 

manifold mount - coil purchased separately 

Excelon ® Plus Modular System 

• Designed with safety in mind, with tamper resistant 

features such as padlocking on both the shut-off 

valves and regulator 

• Compact and light-weight 

with no compromise on 

robustness - suitable for all 

industrial applications 

• Uses unique Quikclamp 

system locking modules 

together securely 

182-9634 BL84-401G - Boxed Set £232.90 

182-9597 B84G-4GK-AP3-RMG - FR assembly £96.10 

182-9632 T84T-4GA-B1N - Shut off valve £46.40 

182-9620 F84G-4GN-AP3 - Filter £58.10 

182-9612 R84G-4GK-RMG - Regulator £47.90 

182-9609 L84M-4GP-EPN - Lubricator £44.40 

Hydraulic Pressure Switches 

• The 18D series of pressure switches is suitable for use 

with neutral oils, lubricating fluids, and hydraulic oil - as 

well as air and inert gases 

• G¼" port connection, 

SPDT contacts, DIN 

connector supplied 

366-3979 0.2-2 bar - 0880200 £92.69 

366-3985 0.5-8 bar - 0880300 £110.70 

822-3951 1-16 bar - 0880400 £92.80 

622-3631 5-70 bar - 0882100 £103.40 

407-6089 25-250 bar - 0882300 £103.24 

613-3437 V61B517A-A3000 - 5/2 G¼ £88.90 

456-5775 V61B413A-A2000 - 3/2 G¼ £71.80 

723-539 QM/48/127/28 - 24Vdc Coil £15.96 

IDG Series Membrane Air Dryer 

• Membrane air dryers improve air quality, 

efficiency & equipment reliability via the removal 

of moisture prior to the point of use 

• Add to your FRL setup to allow water 

to be purged from your air supply 

• 10 sizes available with port sizes: 1/8" to ½" 

667-9299 IDG1-F02 - 10l/min flow £154.66 

667-9309 IDG3-F01 - 25l/min flow £237.08 

667-9302 IDG5-F01 - 50l/min flow £395.09 

667-9306 IDG10-F02 - 100l/min flow £620.15 

667-9315 IDG20-F02 - 200l/min flow £721.50 

884-9232 IDG30A-F03 - 300l/min flow £802.58 

196-4421 IDG50LA-F03 - 500l/min flow £969.44 

Flow Sensors for Compressed Air 

• High precision flow switch with a high 

flow rate and fast response time housed 

in a IP65 compact enclosure 

• Suitable for flow rates of up to 2000 L/min 

• 12 → 24 Vdc supply with standard M8 connection 

124-3831 ½", 5 - 500 l/m single o/p PNP & analogue 1-5V o/p £259.66 

124-3832 ½", 5 - 500 l/m single o/p PNP & analogue 4-20mA o/p £259.66 

124-3830 ½", 5 - 500 l/m dual o/p PNP £259.66 

124-3829 ½", 10 - 1000 l/m single o/p PNP & analogue 1-5V o/p £272.64 

124-3828 ½", 10 - 1000 l/m dual o/p PNP £272.64 

124-3833 ¾", 20 - 2000 l/m single o/p PNP & analogue 1-5V o/p £287.07 

Pressure Sensors for Compressed Air 

• -0.1Mpa to 1 Mpa high precision digital pressure 

switches with 1/8" pressure port 

• 12-24Vdc supply with bright 3 ½ digit 2 Colour LED 

display 

• Easy setup and set-point configuration 

743-6605 Single output PNP - ISE30A-01-P £64.47 

721-3815 Dual output PNP, lead & connector - ISE30A-01-B-G £75.13 

743-6594 Single output PNP, lead & connector - ISE30A-01-P-L £71.58 

721-3818 Single output PNP & 4-20mA o/p, lead & connector - ISE30A-01-F-G £79.42 

740-6391 Single output PNP & analogue 1-5V o/p, lead & connector - ISE30A-01-E-G £79.42 

743-6627 Single output PNP, lead & connector, panel mount - ISE30A-01-P-GB £77.24 

826-2580 Dual output PNP with bracket - ISE30A-01-B-A2Y £67.36 

847-7048 Mounting Bracket - ZS-38-A1 £4.07 

Auto Drains 

• Automatic drains are an efficient 

way of removing condensates 

from your pneumatic system 

while eliminating the chance of 

emptying being overlooked 

• Both variants use float type 

automatic drain valves and have 

a 400cc/min bowl capacity 

234-1993 £50.24 

290-3585 £183.42 

Refrigerated Air Dryer 

• The IDFA refrigerant dryer helps 

to ensure that your compressed 

air supply is clean and dry 

reducing wear and corrosion 

• This high volume dryer is capable of 

an air flow capacity of up to 17m3/h 

at inlet pressures up to 10bar 

• Powered from 230Vac, uses Rc 

3/8" threaded port connections 

and Environmentally ozone friendly 

R134a and R407C refrigerant 

667-9286 IDFA3E-23 £705.64 



14 

15

RENOLD 

TSUBAKI CHAIN 

Steel Simplex Roller Chain - Blue Box 

• British standard simplex chain in 5m lengths 

• All purpose transmission chain with class 

leading wear & fatigue resistance 

• Made to BS / ISO 606 

Standard Duty - Red Box - 

Simplex Chain 

• Simplex steel roller chains for standard applications 

• Conforms to European (BS) standards 

• Complete range of lengths and pitches available 

GT4 Winner Roller Chain 

• GT4 Winner roller chain is a pre-lubricated, 

carbon steel chain designed for the most 

demanding of drive applications 

• Produced under controlled conditions using advanced 

heat treatment to ensure quality you can rely on 

• Full range of TSUBAKI chain available from stock 

- just visit RS online and search 'TSUBAKI' 

Carbon Steel Roller Chain 

• An ANSI standard chain that exceeds the ANSI requirements 

to provide extended life and an increased kW Rating 

• Made under highly controlled conditions using advanced 

heat treatment techniques for superior quality 

• For ease of assembly the pin and link plate 

of a connecting link are slip fit 

183-0858 RS08B-1 - BS ½ in. Simplex, 5m £107.59 

184-5723 RS40-1 - ½ in. Simplex, 10ft £87.16 

183-0859 RS10B-1 - BS 5/8 in. Simplex, 5m £131.34 

184-5724 RS50-1 - 5/8 in. Simplex, 10ft £94.47 

720-4151 06B-1 7.6m length: 9.525mm Pitch £147.52 

183-0860 RS12B-1 - BS ¾ in. Simplex, 5m £85.92 

184-5725 RS60-1 - ¾ in. Simplex, 10ft £129.40 


146-3746 06B-1 5m length,9.525mm Pitch £22.87 

183-0861 RS16B-1 - BS 1 in. Simplex, 5m £257.58 

184-5726 RS80-1 - 1 in. Simplex, 10ft £231.98 



183-0864 RS08B-2 - BS ½ in. Duplex, 5m £131.25 

184-5784 RS40-1 Connecting Link (10 bag) £21.63 



183-0865 RS10B-2 - BS 5/8 in. Duplex, 5m £274.45 


720-4161 16B-1 3m length: 25.4mm Pitch £137.86 


183-0866 RS12B-2 - BS ¾ in. Duplex, 5m £193.00 


720-4170 20B-1 3m length: 31.75mm Pitch £151.91 


183-0867 RS16B-2 - BS 1 in. Duplex, 5m £339.37 


Standard Duty - Red Box - 

Duplex Chain 

• European (BS) standard steel duplex roller 

chains for standard applications 

• Sold in convenient lengths with connecting links available 

Connecting Links - Red Box 

• Red Box series connecting links to allow 

creation of finished chains 

• Sold in packs of 5 links 

Lambda Lube-Free Chain 

• Lambda is a lubrication free, long-life roller 

chain using a special oil impregnated bush 

• The seamless sintered bush is vacuum filled 

with high performance NSF-H1 lubricant 

providing a 30% longer wear life 

• Less time required for maintenance and 

therefore more time for production 

BB Series Cam Clutches 

• Designed for press fit installation with inner & outer keyways 

manufactured according to DIN6885.3. or DIN6885.1. 

• Pre-lubricated with special grease and do not need 

any maintenance or additional grease before use 

175-3106 06B-1 £5.57 

175-3113 08B-1 £12.94 

175-3117 10B-1 £13.61 

175-3120 12B-1 £3.26 

183-0871 RS08B-LM-1 - BS ½ in. Simplex, 5m £182.73 

175-3124 16B-1 £10.17 

183-0872 RS10B-LM-1 - BS 5/8 in. Simplex, 5m £217.40 

184-5750 35mm OD, 15mm ID - BB15-2K-K £45.67 

175-3110 20B-1 £5.64 

183-0873 RS12B-LM-1 - BS ¾ in. Simplex, 5m £271.69 

184-5751 40mm OD, 17mm ID - BB17-2K-K £47.97 


175-3109 06B-2 £11.64 

183-0875 RS16B-LM-1 - BS 1 in. Simplex, 5m £416.26 

184-5752 47mm OD, 20mm ID - BB20-2K-K £38.40 


175-3114 08B-2 £5.25 

183-0897 RS08B Connecting Link (10 bag) £51.65 

184-5754 52mm OD, 25mm ID - BB25-2K-K £40.52 


175-3118 10B-2 £5.95 


184-5755 62mm OD, 30mm ID - BB30-2K-K £56.42 


175-3122 12B-2 £6.86 


184-5756 72mm OD, 35mm ID - BB35-2K-K £40.48 


175-3126 16B-2 £21.35 


184-5757 80mm OD, 40mm ID - BB40-2K-K £48.57 



16 

17

RS PRO MECHANICAL & FLUID POWER 

MECHANICAL FASTENERS 

Polyurethane Pneumatic Tubing 

• Flexible silicone free tubing ideal for in panel 

routing of air circuits supplied in 30m reels 

• Can be used for both pneumatic control and 

chemical transfer lines from -50 to +55°C 

• Full range from 4 to 12mm OD available online 

917-2369 Black 4mm ID, 6mm OD £28.93 

917-2387 Blue 4mm ID, 6mm OD £28.93 

917-2378 Black 5mm ID, 8mm OD £55.47 

917-2381 Blue 5mm ID, 8mm OD £55.47 

917-2371 Black 7.5mm ID 10mm OD £61.53 

917-2393 Blue 7.5mm ID, 10mm OD £61.53 

Shielded Rotary Bearings 

• A range of common metric ball bearings, 

fitted with two metal shields to prevent 

ingress of dirt and foreign matter 

• Suits high and very high speeds 

• Accommodates both radial load 

and axial load in both directions 

• Require very little maintenance 

• Primarily intended for use 

where the inner ring rotates 

619-0064 10mm I.D; 19mm O.D; 5mm W - 6800-2Z £2.21 

619-0216 12mm I.D; 32mm O.D; 10mm W - 6201-2Z £2.36 

619-0250 15mm I.D; 42mm O.D; 13mm W - 6202-2Z £2.27 

619-0395 17mm I.D; 47mm O.D; 14mm W - 6303-2Z £3.34 

619-0402 20mm I.D; 32mm O.D; 7mm W - 6804-2Z £3.57 

619-0812 25mm I.D; 37mm O.D; 7mm W - 6805-2Z £4.05 

619-0698 30mm I.D; 72mm O.D; 19mm W - 6306-2Z £7.59 

619-0682 35mm I.D; 62mm O.D; 14mm W - 6007-2Z £5.05 

Circlip Kits 

• Stainless steel clips conform to DIN 1.4122 and BS3673 

• Supplied in compartmented storage box, complete 

with a layout sheet giving dimensional information 

• Kit 1: Shaft Diameters : 2.25 – 12 mm, 4 – 16 mm, 8 – 12 mm 

• Kit 2: Shaft Diameters: 13 – 20 mm, 14 – 25 mm 

Double Acting Roundline 

Cylinders 

• Steel body and piston rod 

finished with aluminium caps 

• Polyurethane piston and rod seals 

• Complete range of common bore 

and stroke sizes available online 

176-1601 16mm bore, 200mm stroke, 19mm diameter, 

309mm length 


159mm length 


211mm length 


181mm length 


220mm length 


265mm length 

Adjustable Levelling Feet 

• Examples from our range of levelling 

feet available in both stainless 

steel 304 or Zinc plated steel 

• Various load ratings available 

and all allow 10° Tilt Angle 

• Lighter duty plastic foot 

versions also available 

£26.33 

£31.94 

£24.51 

£33.18 

£38.04 

£28.51 

185-4513 M10 x 50mm 400kg, Stainless steel £19.59 

126-3555 M10 x 100mm 400kg, Zine plated steel £26.86 



162-3258 M10 x 100mm 1000kg, Zinc plated steel £26.70 

162-3262 M10 x 125mm 1000kg Zine plated steel £47.35 

126-3550 M10 x 125mm 1000kg Stainless steel £47.53 

278-360 Kit 1 - smaller - 890 pcs kit £58.29 

278-376 Kit 2 larger - 450 pcs kit £94.20 

We have a huge range of fasteners 

& fixings in stock 

• These include screws, bolts, nails, nuts, 

washers, rivets and kits to suit all your needs 

• Available in a number of materials and 

finishes and drive types, from Pozi to 

slotted and hex to Torx 

• For full range visit our website 

Plain Washers 

• Diameters: M1.4 to M20 

560-338 M3 BZP (box 250) £1.11 

525-925 M4 BZP (box 250) £2.02 

525-931 M5 BZP (box 250) £1.92 

525-947 M6 BZP (box 250) £3.23 

527-369 M3 A2 S/S (box 250) £4.55 

527-381 M4 A2 S/S (box 250) £5.56 

527-397 M5 A2 S/S (box 250) £5.35 

527-404 M6 A2 S/S (box 250) £6.06 

189-620 M3 A4 S/S (box 100) £3.50 

189-636 M4 A4 S/S (box 100) £3.75 

189-642 M5 A4 S/S (box 100) £4.04 

189-658 M6 A4 S/S (box 100) £4.44 

483-2592 M3 Brass (box 250) £3.33 

483-2609 M4 Brass (box 250) £7.07 

483-2615 M5 Brass (box 250) £9.85 

483-2621 M6 Brass (box 250) £20.20 

483-0631 M3 Brass Nickel (box 250) £3.13 




Full Nuts 


560-293 M3 BZP (box 250) £3.94 


483-2520 M6 Brass (box 100) £13.14 

530-769 M8 A2 S/S (box 100) £12.56 

183-9045 M12 A4 S/S (box 50) £17.73 

Socket Cap Screws 


• Lengths: 3 - 130mm 

483-8146 M3 x 6mm BZP (box 100) £11.50 

491-5221 M4 x 12mm BZP (box 100) £11.14 

483-9981 M5 x 16mm BZP (box 100) £12.08 

484-0004 M6 x 20mm BZP (box 100) £16.62 

280-981 M3 x 6mm A2 S/S (box 50) £8.90 

281-035 M4 x 12mm A2 S/S (box 50) £10.83 

281-085 M5 x 16mm A2 S/S (box 50) £12.68 

281-120 M6 x 20mm A2 S/S (box 50) £12.44 

187-1207 M3 x 6mm A4 S/S (box 50) £10.77 

187-1257 M4 x 12mm A4 S/S (box 50) £16.62 

187-1320 M5 x 16mm A4 S/S (box 50) £19.49 

187-1409 M6 x 20mm A4 S/S (box 50) £21.99 

467-9773 M3 x 6mm Black (box 200) £15.67 

467-9880 M4 x 12mm Black (box 200) £13.66 

467-9975 M5 x 16mm Black (box 200) £17.52 

468-0105 M6 x 20mm Black (box 200) £20.24 

Slotted Countersunk Machine Screws 



553-857 M3 x 12mm BZP (box 100) £1.97 

553-879 M4 x 12mm BZP (box 100) £2.65 

553-942 M5 x 25mm BZP (box 100) £5.62 

553-992 M6 x 40mm BZP (box 100) £12.04 

527-167 M3 x 12mm A2 S/S (box 100) £4.06 

527-189 M4 x 12mm A2 S/S (box 100) £6.05 

527-303 M5 x 25mm A2 S/S (box 100) £12.44 

914-1703 M6 x 40mm A2 S/S (box 50) £22.07 

158-3348 M3 x 12mm A4 S/S (box 100) £4.87 

158-3382 M4 x 12mm A4 S/S (box 100) £6.46 

914-1876 M5 x 25mm A4 S/S (box 100) £15.79 

158-3556 M6 x 40mm A4 S/S (box 50) £16.95 

482-9192 M3 x 12mm Brass Nickel (box 100) £6.59 




Socket Set Screws 

• Diameters: M3 to M10 


187-0715 M3 x 8mm BZP (box 50) £12.68 

137-770 M5 x 5mm A2 S/S (box 50) £7.25 

530-028 M6 x 12mm Black (100) £9.90 



18 

19

RS ScanStock ® 

RS VendStock ® 

Reduce your operational 

costs, by letting us 

manage them for you 

Take back control over 

consumption and spend 

With RS Scanstock ® we can help you reduce the time & cost of replenishing low 

value, fast moving industrial supplies at line-side or within your central store. 

With RS VendStock ® you can effectively manage fast moving inventory and tools 

lineside, reducing downtime and increasing productivity. 

Improve control and availability 

of low-value, fast-moving items 

Reduce paperwork and streamline 

your process 

Drive down inventory carrying costs 

Increase staff productivity 

Improved reporting 

Located close to point of need 

throughout your premises 

Streamline process and reduce 

paperwork 

Enable 24/7 access to essential 

supplies 

Stay in control of your calibrated 

products with smart tracking systems 

Insight into consumption & spend 

Contact us RInventorySolutions@rs-components.com or call your RS Account Manager to discuss this service 

Contact us RInventorySolutions@rs-components.com or call your RS Account Manager to discuss this service 

20 

21

RS PRO completes your mechanical maintenance jigsaw... 

ACS355 Machinery Drives 

• The ACS355 machinery drives are designed 

to be quick to install and setup - full range 

up to 22kW available from stock 

• Featuring Safe torque-off function (SIL3 ) as standard, 

Sensorless vector control and a built-in braking chopper 

• Suitable for use in both constant & variable torque 

applications the ACS355 is ideal for lifting, food & beverage, 

material handling, 

textile, packaging, 

and plastics 

applications. 

MOTOR CONTROL SOLUTIONS 

PSR & PSTX Soft Starters 

• Soft starters to suit your application; with 

the basic PSR range ideal for controlled 

starting of fans & conveyors, and the PSTX 

offering advanced starting of larger motors 

• Limit high initial starting currents associated 

with Direct-on-Line motor starting, reducing 

mechanical stress and offering energy 

saving benefits 

– Your Smart Choice 

887-4714 3ph input 380-480V 0.37kW £231.34 

887-4717 3ph input 380-480V 0.55kW £243.58 

887-4711 3ph input 380-480V 0.75kW £266.82 

887-4720 3ph input 380-480V 1.1kW £302.34 

887-4723 3ph input 380-480V 1.5kW £367.19 

887-4727 3ph input 380-480V 2.2kW £425.95 

887-4736 3ph input 380-480V 3.0kW £555.70 

887-4739 3ph input 380-480V 4.0kW £632.81 

887-4733 3ph input 380-480V 5.5kW £733.18 

887-4742 3ph input 380-480V 7.5kW £951.06 

511-0455 ACS-CP-C Operator Panel for use with 

ACS355/310 

ACS310 General Purpose Drives 

• General use inverter drives perfect for 

variable torque applications, such as 

pumps and centrifugal fans - available 

in single phase (up to 2.2kW) and 3 

phase (up to 22kW) from stock 

• Built-in pump and fan features such as 

multi-pump control and pipe clean vary the 

drive’s performance in response to changes 

in pressure, flow or other external data 

• Embedded Modbus EIA-485 interface 

£36.47 

751-8810 1ph, 230Vac, 0.75kW £153.01 

751-8814 1ph, 230Vac, 1.1kW £178.71 

751-8823 1ph, 230Vac, 1.5kW £198.29 

751-8826 1ph, 230Vac, 2.2kW £241.13 

705-4776 3ph, 400Vac, 0.75kW £218.84 

705-4770 3ph, 400Vac, 1.1kW £243.28 

705-4789 3ph, 400Vac, 1.5kW £316.59 

705-4782 3ph, 400Vac, 2.2kW £349.92 

705-4786 3ph, 400Vac, 3.0kW £448.79 

705-4795 3ph, 400Vac, 4.0kW £509.88 

705-4798 3ph, 400Vac, 5.5kW £592.08 

705-4792 3ph, 400Vac, 7.5kW £779.82 

851-7638 PSR16-600-11 - 16A, 7.5kW £190.54 

851-7632 PSR25-600-11 - 25A, 11kW £215.82 

851-7641 PSR30-600-11 - 30A, 15kW £254.88 

851-7648 PSR45-600-11 - 45A, 22kW £419.04 

852-3570 PSTX30-600-70 - 30A, 15kW £1,188.92 

852-3582 PSTX45-600-70 - 45A, 22kW £1,366.90 

852-3586 PSTX60-600-70 - 60A, 30kW £1,525.90 

852-3598 PSTX85-600-70 - 85A, 45kW £1,897.44 

ACS150 Micro Drives 

• A micro-drive with a level of programmability 

via a built-in keypad, simple menus 

and built-in PID controller 

• External (analogue) speed control and digital 

I/O allow the drive to be easily integrated 

into an existing control systems and react 

to pressure, flow, or temperature changes 

• A great, low cost way to save energy 

on smaller three phase fans & pumps, 

via either local or remote speed adjustment 

621-1199 Single phase,0.37kW,3 phase output £122.40 





AC Motors 

• RS stocks an extensive range of 2 & 4 Pole IE2 

& IE3 foot and flange mounting AC motors 

• Suitable for a wide variety of 

applications including pumps, fans, 

conveying and process machinery 

• Available from 180W to 7.5kW - suitable 

for DOL starting or inverter drive use 

Click to see range available 



23

FLUKE 

SAFETY DOESN’T 

HAPPEN BY ACCIDENT 

We know that Safety doesn’t happen by accident and 

we’re here to help you keep everyone safe. Our market 

leading range of PPE from the brands you trust is 

available for despatch today. 

Fluke Vibration Meter and 

Stroboscope Bundle 

• Includes the Fluke 805 vibration meter 

which measures overall machine 

vibrations, bearing vibrations and 

temperature simultaneously 

• Plus the Fluke 820-2 LED 

stroboscope is ideal for 

stop motion diagnostics 

and frontline mechanical 

troubleshooting 

• Saving of 15% or £366 

compared to buying 

the items individually 

SAVE 

15% 

Fluke 87-V Digital Multimeter 

• Features the accuracy and resolution 

to troubleshoot on motor drives, plant 

automation, power distribution and 

electro-mechanical equipment in noisy, 

industrial, high energy environments 

• Accurate AC voltage and frequency 

measurements on VSDs with 

Peak Min Max mode capturing 

intermittents as fast as 250μs 

• Built-in thermometer further 

aids troubleshooting 

SPECIAL 

OFFER 

You can depend on us to lead you to safety. 

Our extensive range is far too big to show on one page, 

so to learn more click below to see our PPE guide. 

201-2098 £1,999.00 

480-2355 £445.00 £356.00 

SAFETY DOESN’T 

HAPPEN BY ACCIDENT 

HEAD PROTECTION 

Fluke 376 True-RMS 

Clamp Meter 

• Performance perfect for a wide range 

of current measurement situations 

• With true-rms ac voltage and 

current measurements, the Fluke 

376 can read up to 1000V and 

1000A in both ac and dc modes 

• Includes the iFlex flexible current probe 

which measures up to 2,500Aac while 

providing increased flexibility when 

working on hard to get to conductors 

SPECIAL 

OFFER 

Fluke TiS60+ Thermal 

Imaging Camera 

• Infrared images taken with the 

TiS60+ capture smaller temperature 

differences from farther away 

• 320 x 240 resolution, displayed 

on a 3.5 inch LCD screen 

• Easy to use fixed focus, with 

one-handed image capture, 

review and save capability 

• Fluke Connect compatibility 

for sharing wirelessly 

CALIBRATION 

AVAILABLE 

905-5914 £481.00 £385.00 

198-1145 £2,499.00 

Fluke DS703 FC High Resolution Diagnostic Videoscope 

• High definition probe with dual-view camera, 1200 x 720 (864,000 pixels) resolution 

• Processing speeds that render a smooth, clear, consistent image on a 7'' LCD screen 

• Macro to micro zoom function, and true 720p video 

• Adjustable lighting to capture the best image 

WIDE RANGE OF PRODUCTS AND BRANDS 

TO KEEP YOU SAFE 


We’re by your side 

1 

175-8013 £1,799.00 


24 

25

MECHANICAL TEST & MEASUREMENT 

MECHANICAL TEST & MEASUREMENT 

Grease Test Kit 

• Allows for the testing of consistency, oil bleeding 

properties and contamination 

• Quality can be evaluated to detect deviations from 

batch to batch 

• Portable kit designed for field work 

Laser Belt Alignment Tools 

• These belt alignment tools offer fast and accurate 

laser alignment of pulleys and sprockets 

• Using powerful magnets to hold firmly to the pulley's 

side face, the transmitter projects a line to the 

receiver (mounted on the opposite pulley); various 

indicator lines on the receiver give an immediate visual 

indication of any offset or misalignment with the belt 

• Can be used on almost all machines using V 

belts, ribbed belts as well as chain sprockets 

Digital Force Gauge 

• For easy measurement of tractive and compressive forces 

• Measurement frequency 1,000Hz with accuracy of 

±0.5%, and overload protection for 200% of final value 

• Display rotatable through 180°, with 

indication in N, kg, lb and oz 

• Peak hold function for recording maximum measured 

force, track function for continuous measurement 

Testo 470 Optical & Mechanical 

Tachometer 

• Can be operated with one hand, and offers a combination 

of optical and mechanical rpm measurement 

• By attaching an adapter for a probe tip or a speed 

disc, the optical measurement becomes a mechanical 

one, allowing speeds and lengths to be measured 

• For optical measurements, simply attach a reflective 

marker to the measurement object, point the visible 

measurement spot at the reflective marker, and measure 

732-4757 £445.98 

5-digit Laser Tachometer 

• Fast and accurate non-contact, optical 

measurement of rotational speed, 

RPM, linear speed and distance 

• Long detecting distance up to 2m 

• Clear and easy to read LCD 

display with a memory function 

CALIBRATION 

AVAILABLE 

821-5077 TKBA 10 red laser up to 3m £1,088.02 

821-5086 TKBA 20 green laser up to 6m, or in sunlight £1,307.70 

Vibration Meter 

• Only intervene when you need to, 

and use to maximise equipment 

uptime. Perfect for general machine 

and bearing vibration monitoring 

• The GA2002 is reliable, repeatable, 

simple to use and at a price 

unbeatable for what you get 

• This instrument will give you results for 

many types of vibration measurement 

plus instant data-logging 

559-795 £261.43 

Digital Level / Inclinometer 

• Quick and accurate measurement of 

gradient, with selectable acoustic signal to 

indicate 0° or 90° and hold function 

• Choice of measurement units: degrees °, 

percentage %, or in/ft. with accuracy ±0.2° 

• Battery not supplied, for a suitable 

battery see RS 826-4435 

327-6395 £225.13 

High Power Inspection Torch 

• Cordless, rechargeable lamp for complete 

flexibility, supplied with charging base 

• Perfect for positioning in restricted 

spaces thanks to a powerful 

magnet and swivel hook 

• Bright 215 lumens output, and side 

belt clip for easy carrying 

123-8771 £99.47 

303-3722 £832.83 

667-3916 £116.90 

111-7926 £30.57 

Inspection Camera 

• View inaccessible areas thanks to the probe length of 1m 

• See images clearly on 2.4" LCD screen with 480 x 234 pixels resolution 

• Features a durable camera snake with an 

adjustable intensity LED worklight (IP67) 

NEW 

Handheld LED Stroboscope 

• The LED light provides a powerful beam that can 

be varied in flash rate from 30 to 300,000 fpm 

• Can adjust flash duration to ensure a crisp image, 

and includes time delay for greater flexibility 

• IP65 (splash water and dust) protection and a 

heavy duty design with rubber holster 

CALIBRATION 

AVAILABLE 

192-4383 £126.25 

845-9725 £563.50 



26 

27

MECHANICAL TOOLS 

GEDORE TOOLS 

26-Piece Combination Spanner Set 

• Suitable for professionals, manufactured 

with quality in mind 

• Fully hardened and tempered, polish 

finished chrome-vanadium steel 

• Contains sizes: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 

16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 

29, 30, 32mm in a handy storage case 

Air Hammer 

• ¼" air hammer constructed from aluminium 

with rear exhaust and 3mm stroke length 

• 3000bpm impact rate 

8-Piece Circlip Plier Set 

• Internal and external circlip pliers supplied 

in a plastic carry case 

• Set contains: A1 straight external pliers 

3-10mm, A11 bent external pliers 3-10mm, 

A2 straight external pliers 19-60mm, 

A21 external bent pliers 

19-60mm, J1 straight 

internal pliers 3-10mm, 

J11 bent internal pliers 

3-10mm, J2 straight 

internal pliers 19-60mm, J21 

bent internal pliers 19-60mm 

• Add Promotion Code 

SAVE2020 to order to get 

discount applied 

SAVE 

20% 

6-Piece Pin Punch Set 

• High quality pin punches supplied in 

a plastic holder for easy storage 

• Manufactured from chrome 

molybdenum vanadium steel with 

induction hardened striking heads 

• Contains sizes: 3, 4, 5, 6, 7 & 8mm 

• Add Promotion 

Code SAVE2020 

to order to 

get discount 

applied 

SAVE 

25% 

772-4292 €151.17 £120.94 

772-4390 €48.57 £36.43 

388-3690 £130.04 

Long Arm Bearing Puller 

• Manufactured from alloy steel, 

drop forged and hardened 

• Designed for the easy removal of 

bearings, pulleys, sprockets etc 

• Max size of bearing/pulley 50mm 

• Jaw length 300mm, maximum 

throat depth 220mm 

• Comes with short and long centre points 

• Fine thread for ease of use 

739-8402 £47.83 

Tap and Drill Set 

• 29 piece compact tap and drill set containing 

taper, second and final tap along with 

tap wrench in a handy case 

• HSS structure providing excellent corrosion 

resistance and durability 

• Suitable for a range of applications 

• Set contains sizes: M3, M4, M5, M6, M8, M10 and M12 

9-Piece ½" Hex Driver Bit Set 

• Vanadium steel driver bits for use in 

½" drive hand operated screwdrivers 

stored in a handy case 

• Set contains: Hex 4, 5, 6, 7, 8, 9, 

10, Hex 12, Hex 14 driver bits 


SAVE2020 to 

order to get 

discount applied 

SAVE 

20% 

125-3903 €78.08 £62.46 

Wheeled Tool Trolley 

• Large tool trolley with 6 drawers which 

can be opened from either side 

• 2 fixed and 2 swivel wheels for 

easy movement plus a brake 

• Total load 200kg 

• H 930 x W 605 x D375mm 

847-7919 £525.92 

434-2566 £40.29 

Mechanical Tool Kit 

• 94-piece tool kit comprising a comprehensive socket and 

bit set, spanners and precision screwdriver set 

• Chrome Vanadium construction with Chrome Molybdenum steel sockets 

• ½" and ¼" drive sockets in sizes 4-32mm 

• For full contents visit our website 

694-009 £129.28 

6-Piece Screwdriver Set 

• High quality Pozidriv and slotted 

screwdriver set with 3 component 

handle for comfortable, secure grip 

• Chrome Vanadium steel construction 

with chrome plated finish 

• Contains: Pozidriv: PZ1 & PZ2; 

slotted: 4, 5.5, 6.5 & 8mm 


SAVE2020 to order 

to get discount 

applied 

SAVE 

20% 

½" Drive Adjustable Torque Wrench 

• Ratcheting torque wrench with magnified 

torque setting window for error reduction 

• Dual scale: Nm & lbf.ft with additional micrometer scale 

• Lever breaking mechanism 

• 60-300Nm range with ±3% accuracy 

• Standards: DIN EN ISO 6789: 2003 Type 11, Class A 

• Supplied with factory checked calibration certificate 

734-8889 £86.39 

772-4387 €50.53 £40.42 

772-4321 £207.22 



28 

29

WERA 

DEWALT 

Wera Kraftform Kompakt VDE 

17 Extra Slim 1 Interchangeable 

Screwdriver Set 17 Piece 

• Individually tested VDE interchangeable blades for safe 

working up to 1,000V 

• 2x multi-component Kraftform VDE blade-holding 

handles for ergonomic working 

• Extra-slim blades allow sunken screws and spring 

elements to be accessed and actuated 

• Multifunctional pliers for electrical installation: cable 

cutting, stripping, gripping, 

bending, deburring, 

crimping of wire end 

ferrules 

• Pliers including cable 

shears with precision cutting 

edges (inductively hardened) for Cu 

and Al cables up to 5 x 2.5mm² / Ø 15 mm 

193-6134 £109.73 

Wera 950 SPKL/9 SM N SB 

BlackLaser L-key set 9pc, 

Metric, 1.5-10mm 

• L-keys for hexagonal socket screws 

• Hex-Plus profile extends the service 

life of socket head screws 

• Colour coded, easy-to-grip plastic 

sleeve, even at low temperatures 

• Hexagonal ballpoint on the long arm 

• The holding function holds 

screws securely on the tool 

Wera 6003 Joker 5 Set 1 Ring 

Spanner Set, 5 Pieces 

• Especially suitable for tight spaces 

• The special mouth geometry expands the 

placement possibilities of the tool 

• The low return angle in the mouth 

"takes" the screw every 15° 

• Slim ring side angled by 15° 

• Suitable for docking with 

the Wera 2go system 

201-2186 £57.61 

Wera Kraftform Kompakt W1 

Maintenance Tool Set, 35-piece 

• Incredibly fast ¼” Zyklop Speed ratchet with pivoting 

ratchet head and 5 predefined locking positions 

• Joker double open-end wrench with holding function, limit 

stop, small return angle and extremely gripping teeth 

• VDE-insulated Kraftform holder including 12 

interchangeable blades 

• Ultra Compact tool set in a highly 

robust, surface protecting, 

compact textile box 

• “Take it easy” tool finder 

system – with profile and size 

colour-coding for quick and easy 

tool selection 

Innovative connective torque wrenches feature Bluetooth 

technology. Ensures precision and safety, meeting 

manufacturer torque specifications. Improved efficiency 

and productivity with quick and easy setup. 

• Illuminated OLED display provides a clear view of all on-screen info. 

• Four LED progress lights deliver 360° visibility with haptic/ visual alert. 

• Favourite sequences can be saved for recurring error free jobs. 

• Dedicated data exchange cloud based storage app for management 

analysis and audit trail. 

• Durable construction including IP54 rating for dust and water resistance. 

18V Cordless Angle Grinder 

• Steel cut spiral bevel gears for durability and low vibration 

• Intelligent trigger design 

• Lock off switch for safety and control 

• Quick change wheel release 

• Supplied with 2x 4.0Ah Li-Ion batteries, multi-voltage 

charger. 2 position side handle, protective guard, 

blade wrench and heavy-duty carrying case 

Smart Torque Wrenches 

194-5900 ¼" drive 6-30Nm £586.03 

194-5901 3/8" drive 13.5-135Nm £605.57 

194-5902 ½" drive 34-340Nm £612.67 

NEW 

LOWER 

PRICE 

136-7121 £34.04 

Wera 8100 SA 2 Zyklop Speed 

Ratchet, Sockets, Bits and 

Accessories Set, ¼" Drive, 42pc 

• Multi-function 6 in 1 ratchet solves access issues 

• The ratchet head pivots freely and can be locked 

into any position using the side switch 

• Fine reversible 72 fine tooth 

ratchet and return angle of only 

5° allows fast and precise work 

• "Flywheel" head design and 

freewheel spin-sleeve increased 

operation speed by up to 5 times 

• Ratchet can be used as a 

conventional screwdriver in the 

0° position by attaching a bitholding 

adaptor and a bit 

123-1889 £124.75 

Wera Kraftform Kompakt Turbo 1, 

18 Pieces 

• Quadruples the screwdriving speed in a 

purely mechanical way (without battery) 

• Activation and deactivation of the turbo 

function by a simple push of a button 

• The fixable universal gear allows powerful 

screwdriving and easy fine adjustments 

• Robust, maintenance-free gear made 

of steel (maximum torque 14 Nm) 

• ¼" hexagon take-up with 

Rapidaptor quickrelease 

chuck 

769-4056 €444.54 £299.00 

18V Cordless Hammer Drill 

• Ultra compact, lightweight design 

allows use in confined spaces 

• Two speed all metal transmission for 

increased runtime and longer tool life 

• Drill/driver and hammer feature 

for multiple applications 

• 15 position adjustable torque 

control for consistent screw driving 

into a variety of materials 

• Supplied with 2 x 5.0Ah Li-ion 

batteries, multi-voltage charger, 

belt hook, side magnetic bit holder 

in a TSTAK heavy-duty kit box 

NEW 

LOWER 

PRICE 

18V Cordless Impact Wrench 

• Powerful fan cooled motor delivers up to 

950Nm of torque and 2400 impacts per 

minute for heavy-duty fastening applications 

• Up to 1625Nm of "breakaway" torque 

ensures removal of the tightest bolts 

• ½" (13mm) square drive with detent pin allows 

for more efficient torque delivery and excellent 

socket retention 

• Supplied with 2x 5.0Ah 

batteries, heavy-duty 

transport case and a 

multi-voltage charger 

SAVE 

20% 

495-423 £167.57 

201-2203 £113.48 

826-8015 £279.00 

122-2427 €423.70 £339.00 



30 

31

DORMER 

Metric A002 TiN Coated Jobber 

Drill Sets 

• Premium HSS drill bit performance 

from Dormer A002 Sets 

• Split point geomerty selfcentering 

design and TiN Coating 

makes these drill bits easy to 

use, allowing for more accurate 

centering and increased tool life 

• Suitable for cutting a wide range of 

materials and drilling applications 

136-8727 5 piece metric: 4,5,6,8,10mm £18.15 

794-7662 19 piece metric: 1-10 x 0.5mm £46.49 

816-4626 43 piece metric: 3-13mm £125.60 

6 Piece HSS 90° Metric Countersink Set 

• For the production of 90° 

chamfers, with a triple flute ground 

design for efficient cutting 

• Designed for use on a variety of 

materials (metals,wood and plastic) 

• Set contains G136 countersinks in 

sizes: 6.3, 8.3, 10.4, 12.4, 16.5, 20.5mm 

• Supplied in a plastic case 

812-6018 £116.16 

XLCFN Lathe Tool Parting Sets 

• For radial parting and grooving application 

• Available with single edge inserts for production 

of deeper grooves 

• Back stop incorporated within inserts for 

improved depth control 

• Suitable for a wide range of materials 

Drill & Tap Set 14 Piece, HSS-TiN 

Coated Drills HSS Straight Flute Taps 

• High-performance taps and drills 

designed for drilling and tapping of 

most materials 

• Featuring A002 drills with Titanium 

Nitride tip coating that minimises 

wear, increases tool life and allows 

increased performance 

• The drills are self-centring split-point 

for excellent positional accuracy and 

hole quality 

• Hand machine taps compliment the 

set in sizes M3, M4, M5, M6, M8, M10, M12 

787-8986 £85.52 

DUO Tap & Drill Packs 

• Contains correct size A002 HSS tincoated 

jobber drill and a 

matching E500 straight flute 

tap for through or blind holes 

• Tin coating on drill provides 

good hot hardness when 

drilling and the 118° split 

point provides self-centering, 

and easier penetration of the 

material being drilled 

174-0101 M3 £9.86 

174-0102 M4 £9.12 

174-0104 M5 £10.36 

174-0105 M6 £10.62 

174-0106 M8 £13.38 

174-0107 M10 £16.52 

174-0108 M12 £23.40 

DCLNR 2020 Turning Kits 

• For all general external turning operations. D style 

holders with top clamp for increased security, 

contains a CNMG 120408 inserts in grades T8330 and 

T9325 suitable for a wide variety of applications 

• Cuts stainless steel, steel and cast iron, potentially 

non-ferrous, super alloys and hard materials 

• Medium to semi-roughing chipbreaker 

Efficiently solving design problems with 

DesignSpark Mechanical v5.0 

DesignSpark Mechanical 

software has just been 

upgraded to DSM v5.0 

with a host of features that improve 

usability and design efficiency: 

• User customisable shortcuts 

• Custom rendering 

• Flythrough display 

• Improved sketching with equations and a 2D 

constraint-based mode 

• Mass properties that better supports 

calculations for 3D printing 

Engineers looking for extended features such as import & export of 

IGES format files, support for STEP files, GD&T annotations, customised 

drawing sheets, perspective modification on 2D drawings from 3D objects 

are supported too. Drawing and Exchange add-on packages add just the 

features you need and can be purchased individually, or as a bundle. 

Download DSM v5 for free 

136-3967 2602 J 3.00 £102.44 

136-3968 2602 J 4.00 £108.06 

136-3969 3202 M 3.00 £106.73 

136-3971 3203 M 4.00 £110.35 

136-3974 T8330 £111.89 

136-3976 T9325 £114.07 

Explore the extended features of DSM add-ons 


32

INVENTED TO LAST 

Fuelled by years of research & development, numerous trials 

in competence centres across the globe. BOSCH has created a 

range of Carbide Technology products. Carbide Technology fuses 

a unique formula of Carbide, one of the hardest metals on the 

planet with power tool accessories. A new breed of power tool 

accessories designed to reach unprecedented levels of performance. 

Longer. Tougher. Better. Discover a new way of working. 

Jigsaw Blades - Fiber & Plaster 

BOSCH CARBIDE 

Hole Saws - Endurance For Heavy Duty 

FULL RANGE OF TRADE SOLUTIONS 

FULL RANGE OF TRADE SOLUTIONS 

AVAILABLE AVAILABLE NOW 

NOW 

POWER 

POWER 

TOOLS 

TOOLS 

ACCESSORIES 

ACCESSORIES 

HAND 

HAND 

TOOLS 

TOOLS 

STORAGE 

STORAGE 

milwaukeetool.co.uk 

milwaukeetool.co.uk 

197-7043 T141HM 100mm £11.91 

197-7044 T2341HM 132mm £13.81 

Reciprocating Saw Blades - 

Endurance 

197-7054 Brick pack of 5 £25.92 

197-7055 Brick wide body £39.40 

197-7056 Stainless steel £18.79 

197-7057 Vehicle rescue £20.03 

197-7058 Heavy metal wide body £12.96 

197-7059 Heavy metal pack of 10 £199.08 

197-7060 Heavy metal £29.12 

197-7061 Hard nails £12.47 

SDS Max-8X Hammer Drills 

197-7028 12 x 400 x 540mm £52.20 

197-7029 14 x 400 x 540mm £59.40 

197-7031 16 x 200 x 340mm £52.20 

197-7032 18 x 400 x 540mm £64.80 

197-7033 20 x 400 x 520mm £66.61 

197-7034 22 x 400 x 520mm £70.20 

197-7035 24 x 400 x 520mm £77.40 

197-7036 20mm diameter £18.05 

197-7037 22mm diameter £18.88 

197-7038 25mm diameter £18.88 

197-7039 32mm diameter £20.57 

197-7040 51mm diameter £24.72 

197-7041 70mm diameter £33.62 

Circular Saw Blades - Expert For Wood 

197-7045 216x30x2.4x48T £50.31 

197-7047 254x30x2.4x60T £44.55 

197-7048 305x30x2.4x72T £57.13 

197-7049 165x20x2.6x24T £23.95 

197-7050 190x30x2.6x24T £27.98 

197-7051 160x20x24 £28.56 

197-7053 165x20x48 £35.17 


35

LED LENSER 

Next Generation Illumination. 

Flawless light for any task. 

Lighting for professionals at work. These extra robust, handy, chemical-resistant (excluding P4R) models are 

suitable for various work environments. Excellent colour rendering index (CRI) performance gives constant 

and colour-neutral light. And all have a 7-year with registration warranty - for complete peace of mind. 

NEXT GENERATION 

TECHNOLOGY 

40V MAX XGT 

COMBI DRILL 

- Digital display for visual 

confirmation of selected torque. 

- Excellent performance in 

continuous heavy duty 

applications. 

40V MAX XGT 

IMPACT DRIVER 

- Electronic 4-stage impact power 

selection + 6x Assist Modes. 

- 6x Assist modes: 2x T-modes, 

1x Wood mode, 3x Bolt modes. 

40V MAX XGT SDS+ 

HAMMER DRILL 

- 3x Operating modes: RO/RH/HO. 

- Anti vibration technology. 

- Soft no load function 

automatically reduces the motor 

speed during idling. 

40V MAX XGT 

RECIP SAW 

- Electronic 2-speed selection. 

- Constant speed control. 

- LED job light. 

- Tool-less shoe adjustment and 

blade change. 

H Series Work Rechargeable LED 

Headlamps 

• Super tough, compact, focusable, featuring a dimming 

function and delivers a more natural light due to its high 

CRI value. It’s the perfect choice for any workplace 

• Comes complete with Helmet Clips, extra 

non-slip silicone headband 

• Three brightness levels 

• Simple, efficient magnetic contact charging via cable supplied 

• Designed to withstand a 3m drop test, and IP67 rated too! 

NEW 

204-3301 H5R 500 lumen CRI 80 £74.95 

204-3302 H7R 1000 lumen CRI 90 £99.95 

204-3303 H15R 2500 lumen CRI 90 £166.63 

P4R WORK Rechargeable 

LED Torch 

NEW 

P Series WORK 

Rechargeable LED Torches 

NEW 

205-2391 

£239.00 

40V MAX XGT 

125MM GRINDER 

- Tool-less wheel cover is adjustable 

to any desired position. 

- Able to continuously perform 

heavy-duty cutting and grinding. 

205-2392 £299.00 

40V MAX XGT 

115MM GRINDER 

- Tool-less wheel cover is adjustable 

to any desired position. 

- Able to continuously perform 

heavy-duty cutting and grinding. 

205-2388 £349.00 

40V MAX XGT 2.5Ah 

& 4.0Ah BATTERIES 

- Greatly increased water and drop 

impact resistance. 

- Battery fuel gauge: 4 LED’s. 

- 4.0Ah charge time: 45 Minutes. 

- 2.5Ah charge time: 28 Minutes. 

205-2389 £260.00 

40V MAX XGT 

CHARGER 

- New raised and enlarged 

charging indicator status light. 

- Two cooling fans, one for the 

battery and one for the circuit. 

- Use the ADP10 adaptor for 

charging LXT Li-ion batteries. 

• With its 100 metre beam range, the 

pocket sized P4R is the ideal shape to 

illuminate those difficult to reach areas 

• High CRI that delivers a more natural illumination 

for distinguishing colour more accurately 

• Three brightness levels - Power 170lm, Mid- 

Power 70lm, Low Power 15lm 

• Simple, efficient magnetic contact 

charging via cable supplied 

• Delivers powerful focusable illumination and 

exceptional protection against everyday 

knocks as well as water and dust ingress 

• Simple, efficient magnetic contact 

charging via cable supplied 

• Four brightness levels - plus Position, Blink, SOS, and Strobe 

• Smart Light Technology allows customisation of light 

modes and settings for maximum user flexibility 

• Dimming feature, plus flicker-free light - prevents a 

strobe effect, for example on fast moving machinery 

• Designed to survive a 3m drop test 

205-2394 £215.00 

205-2393 £208.00 

205-2386 4.0Ah £150.00 

205-2387 2.5Ah £115.00 

205-2395 £82.50 

204-3296 P4R 170 lumen CRI 80 £41.63 

204-3297 P5R 480 lumen CRI 70 £66.63 

204-3298 P6R 850 lumen CRI 90 £91.63 

204-3299 P7R 1200 lumen CRI 90 £116.63 


36 

Visit rs-online.com for further details 

37

3M 

Scotch ® Super 33+ Vinyl 

Electrical Tape 

• Professional grade tape provides moisture-tight 

electrical and mechanical protection due to its 

high level of conformability and flexibility 

• Gives a high level of performance in 

ambient temperatures up to 105°C 

• Suitable for cold weather applications down 

to –18°C, without becoming brittle 

• UL, CSA and VDE approved 

Scotch ® Super 88 Vinyl 

Electrical Tape 

• Premium grade, 8.5-mil thick, all-weather vinyl 

insulating tape performs continuously in ambient 

temperatures up to 105°C and conformable for 

cold weather applications down to -18°C 

• Excellent resistance to abrasion, moisture, alkalies, 

acids, corrosion and varying weather conditions 

• The combination of elastic backing and aggressive 

adhesive provides moisture-tight electrical and 

mechanical protection with minimum bulk 

• UL and CSA approved 

Amberklene FE10 

Fast drying solvent degreaser. 

Amberklene FE10 

Fast Amberklene drying solvent degreaser. 

FE10 

Use for the general degreasing of machinery 

including chains, gears, bearings, drives, motors, 

Use and Fast for more. 

drying the general solvent degreasing degreaser. of machinery 

including • Use Powerful for the chains, flushing general gears, action degreasing bearings, rapidly of dissolves drives, machinery motors, and 

and including removes more. 

chains, contaminants 

gears, bearings, drives, motors, 

• and Powerful Safe more. for use flushing on all action metals rapidly and most dissolves plastics and 

• removes Zero Powerful residue contaminants 

flushing - perfect action for rapidly surface dissolves preparation and prior 

• Safe to removes bonding, for use contaminants painting, all metals coating, and most or relubrication plastics 

• Zero Fitted Safe residue for with use the on - perfect Ambersil all metals for 360° surface and degree most preparation plastics spray system prior 

• to for Zero bonding, all residue angle painting, use 

- perfect coating, for surface or relubrication 

preparation prior 

• Fitted to bonding, with the painting, Ambersil coating, 360° degree or relubrication spray system 

• for Fitted all angle with the use 

Ambersil 360° degree spray system 

for all angle use 

By CRC Industries 



Chainspray 

Chain & Drive Lubricant. 

Use Chainspray 

on all types of drive chains, including 

production Chainspray 

& Drive line, Lubricant. door mechanisms, quarry plant, 

and Chain Use drying on & all Drive types oven Lubricant. doors. of drive chains, including 

• Use production Offers on all maximum types line, door of adhesion drive mechanisms, chains, to chain including quarry link with plant, 

production and excellent drying penetration, oven line, doors. 

mechanisms, lubrication and quarry corrosion 

plant, 

and • protection Offers drying maximum oven of the doors. pins adhesion to chain link with 

• High Offers excellent temperature maximum penetration, adhesion resistant: lubrication to up chain to and 200°C link corrosion 

with continuous 

(300°C excellent protection intermittent) 

penetration, of the pins 

lubrication and corrosion 

• Also protection High available temperature of the as pins an resistant: alternative up to product 200°C specifically continuous 

• for High (300°C use temperature on intermittent) forklift trucks: resistant: “FLT up Chain to 200°C Spray” 

continuous 

• (300°C Also available intermittent) as an alternative product specifically 

• Also for use available on forklift as an trucks: alternative “FLT Chain product Spray” 

specifically 

for use on forklift trucks: “FLT Chain Spray” 

 

 

780-5219 

780-5231 (745-7523 FLT Chainspray) 

176-251 19mm x 6m £2.14 

170-1192 20mm x 19m £7.79 

3M Peltor WS LiteCom PRO III Headset 

• Designed for use in tough and noisy environments with built in handsfree 

radio communication and integrated noise-cancelling microphone 

• Bluetooth connectivity allows you to manage phone calls 

directly in your headset by connecting to your mobile phone 

• Level dependent function for ambient listening 

909-4524 50mm x 33m £20.56 

780-5219 

780-5219 

Ambergrease EXL 

Extended Life, Performance Bearing Grease. 

Ambergrease 

Use on critical, high load 

EXL 

bearings and sliding 

surfaces. Ambergrease Ideal for use in EXL applications where a 

Extended Life, Performance Bearing Grease. 

Use longer Extended on 

than 

critical, Life, usual Performance high 

in-service 

load bearings 

life Bearing is required. 

and Grease. sliding 

surfaces. • Use Exceptional critical, Ideal 

load 

for high use 

carrying load in applications bearings capacity: and >800Kg 

where sliding a 

4-ball 

longer surfaces. weld 

than 

load 

Ideal usual for in-service use applications life is required. 

where a 

• longer Exceptional 

Mean than Hertz usual load 

Load: in-service carrying 

125Kg; 

capacity: 

Timken life is required. OK 

>800Kg 

load: 25Kg 

4-ball 

• weld Highly Exceptional visible 

load 

load red carrying grease, NLGI capacity: type >800Kg 2, Lithium- 

4-ball 

• Mean Calcium weld loadComplex thickened 

Hertz Load: 125Kg; Timken OK load: 25Kg 

• Highly Operational Mean Hertz visible Load: Temperature 

red grease, 125Kg; range: 

NLGI Timken -30°C 

type OK 2, load: to +150°C 

Lithium- 

25Kg 

• Calcium Highly visible Complex red grease, thickened 

NLGI type 2, Lithium- 

• Operational Calcium Complex Temperature thickened range: -30°C to +150°C 

• Operational Temperature range: -30°C to +150°C 

293-495 

£9.31 



Tufcut Foam 

Foaming Metal Cutting Lubricant. 

Tufcut Foam 

Tufcut Foam 

Tufcut is a specialist metal cutting lubricant based 

on 

Foaming 

a mixture 

Metal 

of lubricants, 

Cutting Lubricant. 

extreme pressure 

additives, Foaming Tufcut is a Metal and 

specialist 

anti-oxidants. Cutting metal Lubricant. cutting 

Tufcut 

lubricant 

demonstrates 

based 

exceptional Tufcut on a mixture is a specialist performance 

of lubricants, metal in 

extreme cutting demanding 

lubricant pressure 

based 

applications. 

additives, a mixture and of anti-oxidants. lubricants, extreme Tufcut pressure demonstrates 

• additives, exceptional 

Proven Tufcut and performance anti-oxidants. liquid in a 

in 

foam 

demanding 

Tufcut that clings demonstrates to vertical 

exceptional surfaces 

applications. 

performance in demanding 

• applications. Ideal for maintenance of turbine blades 

Proven Tufcut liquid in a foam that clings to vertical 

• Minimal Proven surfaces 

Tufcut smoking liquid & fumes in a foam in use 

that clings to vertical 

• Allows surfaces heavier close tolerance cuts 

Ideal for maintenance of turbine blades 

• Improves Ideal Minimal for smoking maintenance heat dissipation 

& fumes of turbine & prevents use 

blades chip welding 

• Minimal Allows heavier smoking close & fumes tolerance in usecuts 

• Allows Improves heavier heat close dissipation tolerance & prevents cuts chip welding 

• Improves heat dissipation & prevents chip welding 

558-051 

£12.42 

293-495 

293-495 

£9.19 

558-051 

558-051 

£15.35 

884-2388 £838.01 

38 


RSComponents - Your Complete Chemical Solution.indd 1 17/09/2020 08:27:32 


RSComponents - Your Complete Chemical Solution.indd 17/09/2020 08:27:32 

RSComponents - Your Complete Chemical Solution.indd 1 17/09/2020 08:27:32 

39

CONSUMABLES 

Aerosol Paint 

• High quality, universal acrylic based spray 

paint in aerosol form 

• 100% ozone friendly 

• Excellent coverage, 

flow and opacity 

• Fast drying 

• Chemical and water 

resistance 

• 400ml 

Food Safe Cleaners, Sprays 

and Oils 

• Formulated for use in the food/ 

beverage industry, products 

are NSF registered 

• Cost effective cleaners, sprays and 

oils from our own brand range 

OUR EXPERTS’ CHOICE 

YOUR MAINTENANCE SOLUTION 

Maintenance essentials: the experts’ choice 

There are some key products that every maintenance toolbox needs, and 

ROCOL has made it easy to keep your core product stores well stocked 

with the introduction of ROCOL SELECT. 

Your maintenance essentials 

The products in the ROCOL SELECT collection have been hand-picked by industry experts to give 

you all your maintenance toolbox essentials in a single product range, including high-performance 

lubricants, cleaners and general purpose lubricants. 

A proven track record 

With over 130 years’ of working closely with manufacturers, and one of the industry’s widest portfolios 

of high-performance lubrication and maintenance solutions, ROCOL understands the day-to-day 

challenges of keeping factories running efficiently and has developed its product portfolio to 

help maintenance engineers reduce downtime and improve productivity. 

764-3064 Grey primer £4.93 

764-3039 Matt black £4.59 

764-3036 Gloss black £5.72 

764-3023 Gloss white £4.59 

764-3042 Fluorescent yellow £4.59 

764-3033 Fluorescent red £4.59 

WYPALL X60 Cloths Pop Up Box 

• A highly versatile cloth, 

designed for light and 

general wiping tasks in 

industrial manufacturing 

• Advanced Hydroknit Technology 

ensures each cloth is strong 

and fast-absorbing 

• 1 centrefeed roll containing 

150 blue, 1 ply cloths 

137-2029 Chain oil 400ml £12.52 

137-2030 Foam cleaner 500ml £6.14 

137-2031 Lube oil 400ml £9.51 

137-2032 Silicone spray 400ml £7.56 

137-2033 Belt spray 400ml £8.03 

137-2034 Dry lube 400ml £8.79 

137-2035 Label remover 200ml £7.33 

137-2036 Penetrating spray 400ml £6.80 

137-2037 Bearing grease 380g £11.18 

137-2038 Solvent cleaner 500ml £8.03 

Loctite 243 Threadlocker 

• General purpose threadlocker 

prevents loosening through vibration 

and leakage of threaded fasteners 

• Particularly suitable for less active 

surfaces e.g. stainless steel 

• 50ml bottle 

Committed to quality 

From product concept and design to technical expertise and customer services, every function 

at ROCOL is carefully controlled within a BS EN 9100:2018 and ISO 9001:2015 accredited Quality 

Management System. Every batch is tested in a quality control laboratory and released for use 

only when it meets the high standards associated with all ROCOL products. 

Trusted across the globe 

From leading names in aerospace to household food brands, ROCOL products are used by 

companies around the world to provide performance improvements including life cycle cost 

reduction, reducing and improving Mean Time Between Failures, and Total Cost of Ownership 

of a lubricant maintenance programme. 

632-5125 £16.26 

White T-Shirt & Cotton Sheeting Rags 

• Soft absorbent rags ideal for polishing, wiping and spillages 

• All rags are screened to ensure they are hygienic and attachment free 

• 3kg packed in a equivalent 5kg box for easy removal and portability 

408-4080 £43.44 

Find out more 

ROCOL high performance products are available through our trusted partner, RS Components. 

Ask your representative for more information about ROCOL’s SELECT package. 

667-3118 £15.54 


40 

41

Keep Your Production Moving And Improving - UK

Create successful ePaper yourself

Delete template?

Save as template?