Tengine STARK SLE PREMIUM

More documents

Recommendations

Info

&nbsp System Overview Area of application All the components of the TALEXXengine STARK SLE PREMIUM system comply with the protection requirements of IP20. The system is therefore suitable for indoor applications. TALEXXengine STARK SLE PREMIUM complies with system protection class II. The TALEXXmodule STARK SLE PREMIUM modules meet the requirements of protection class III. Operating functions STARK SLE PREMIUM offers a wide range of settings for colour temperature and dimming level. Different controllers are available. The controllers are connected directly to the converter. Central control via the converter Control via DALI or a switchDIM switch is achieved by connecting these devices to the converter. Control via DALI Caution! The control line must be installed in accordance with the relevant directives on low voltage. Notice: The control input is protected against polarity reversal and against accidental connection to mains voltage up to 264 V AC. For DALI control the light modules are digitally controlled via the DALI signal (16-bit Manchester Code). The predefined colour temperatures and dimming level can be changed via DALI (see chapter "Changing predefined colour temperatures and dimming levels", page 10). Control via switchDIM A conventional double pushbutton switch can be used for control via switchDIM. One of the pushbuttons is used to set the colour temperature, the other to set the dimming level. Caution! Pushbuttons with glow lamps affect the switchDIM, colourTEMPERATURE and colourSWITCH functions and should therefore not be used for this purpose. For control via a switchDIM switch different settings can be made: Setting for the colour temperature via colourTEMPERATURE mode or colourSWITCH mode with 8 predefined values between 2700 K and 6500 K. Stepless setting for the dimming level between 15% and 100%. The colourTEMPERATURE mode and colourSWITCH mode differ in the position of the individual colour values along the Planckian curve. The colourTEMPERATURE mode is designed to meet the requirements of general and shop illumination, whereas the colourSWITCH mode is designed for food lighting. On start-up the device first activates colour temperature setting in the colourTEMPERATURE mode. The starting values are a Technical Design-in Guide TALEXXengine STARK SLE PREMIUM | 11-2012 | en - 8 / 50 -
&nbsp System Overview On start-up the device first activates colour temperature setting in the colourTEMPERATURE mode. The starting values are a colour temperature of 2700 K and a dimming level of 100%. colourTEMPERATURE mode Location of the colour temperatures along the Planckian curve 1 2,700 K 2 3,000 K 3 3,500 K 4 4,000 K 5 4,500 K 6 5,000 K 7 5,700 K 8 6,500 K colourSWITCH mode Location of the defined colour temperatures Technical Design-in Guide TALEXXengine STARK SLE PREMIUM | 11-2012 | en - 9 / 50 -
Page 1: 270 122,5 Ø4,5 Technical Design-in
Page 4 and 5: &nbsp Introduction Description A ne
Page 6 and 7: &nbsp Overview of Chapters Summary
Page 10 and 11: &nbsp System Overview Location of t
Page 12 and 13: &nbsp System Overview Versions TALE
Page 14 and 15: &nbsp System Overview Standards and
Page 16 and 17: &nbsp Mechanical Aspects Notes on i
Page 18 and 19: &nbsp Mechanical Aspects Instructio
Page 20 and 21: &nbsp Mechanical Aspects Further in
Page 22 and 23: &nbsp Electotechnical Aspects Elect
Page 24 and 25: &nbsp Electotechnical Aspects Conne
Page 26 and 27: &nbsp Electotechnical Aspects Wirin
Page 28 and 29: &nbsp Optical Aspects Coordinates a
Page 30 and 31: &nbsp Optical Aspects MacAdam Ellip
Page 32 and 33: &nbsp Thermal Aspects Examples of r
Page 34 and 35: &nbsp Thermal Aspects Requirements
Page 36 and 37: &nbsp Thermal Aspects 12 V fan conn
Page 38 and 39: &nbsp Ordering information and sour
Page 50: &nbsp Ordering information and sour

Tengine STARK SLE PREMIUM

Create successful ePaper yourself

Delete template?

Save as template?