Water softeners catalog
We are a wholesale supplier of products, solutions and services in water treatment. We provide only businesses companies such as distributors, retailers, manufacturers and assemblers. A catalog that includes products carefully selected from the most prestigious brands in the Water Treatment market, operative site, personalized services, logistics precise and efficient, flexible organization, but also the basic importance that is attributed to human factors and relationships with partners, are of Sinergroup Srl a reference for many companies of the sector.
We are a wholesale supplier of products, solutions and services in water treatment.
We provide only businesses companies such as distributors, retailers, manufacturers and assemblers.
A catalog that includes products carefully selected from the most prestigious brands in the Water Treatment market, operative site, personalized services, logistics precise and efficient, flexible organization, but also the basic importance that is attributed to human factors and relationships with partners, are of Sinergroup Srl a reference for many companies of the sector.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
A bypass valve system must be installed on all systems. The bypass valves isolate the device from the
water system and allow the use of untreated water. Routine maintenance or service may also require that
the system is put in bypass.
Benefits and advantages
Reduction of water hardness, which is cause of scale. ENERGY SAVING: the device prevents the
formation of deposits in pipes and hydraulic lines. Greater sense of wellness during the shower. Skin soft
and clean. Increased duration of appliances and boilers. COST SAVING: reduction in the use of soaps,
fabric softeners and chemicals. Reduced maintenance costs. Fully automatic operation. It should just worry
about adding salt in the water softner.
Increased sodium (for drinking water)
Most of the sodium consumed is taken with foods, especially ones obtained with industrial processing. Salt
is a great preservative and therefore is used as an additive for processed products. The assumption of
sodium with the water we drink is relatively low compared to that which is taken with food. All softeners to
produce softened water through ion exchange resins in, produce softened water output sodium ions. The
recommended sodium limit for water intended for human consumption is 200ppm liter. Depending on the
concentration of sodium and water hardness, it is possible that the water presents a sodium concentration
of higher than recommended. Where this is the case or if you need to follow a low salt content, it is
advisable to install a reverse osmosis home for water to drink.
Features
* Min. pressure : 1.38 bar (1.38 kg/cm2)
* Max. pressure : 8.27 bar (8.27 kg/cm2)
* Minimum temperature: 2°C
* Maximum temperature: 38°C
* Input / Output water 1" female thread
* Exhaust: hose connector with 2m. of tube
* Overflow: hose connection 3/8"
Model Specifications 15000105-08 8lt. resin. (for 1/2 people)
* Exchange capacity: 44ºHFxm3.
* Salt consumption for regeneration: 1,24 Kg./salt.
* Water consumption for regeneration: 53,6lt.
* Quantity of water treated for regeneration, 30°F-0,68m3, 35°F-1,26m3, 40°F-1,1m3, 45°F-0,98m3,
50°F-0,88m3, 60°F-0,73m3.
* Max. flow 0,32 m3/h
* Dimensions Europe I - Base (mm): 480x320 * Height (mm): 655
Model Specifications 15000105-10 10lt. resin. (for 2/3 people)
* Exchange capacity: 55ºHFxm3.
* Salt consumption for regeneration: 1,8 Kg./salt.
* Water consumption for regeneration: 67lt.
* Quantity of treated water for regeneration, 30°F-1,83m3, 35°F-1,57m3, 40°F-1,37m3, 45°F-1,22m3,
50°F-1,1m3, 60°F-0,916m3.
* Max. flow 0,54m3/h
* Dimensions Europe I - Base (mm): 480x320 * Height (mm): 655
Model Specifications 15000105-12 12lt. resin. (for 2/3 people)
* Exchange capacity: 66ºHFxm3.
* Salt consumption for regeneration: 1,8 Kg./salt.
* Water consumption for regeneration: 80,4lt.
* Quantity of treated water for regeneration, 30°F-2,2m3, 35°F-1,88m3, 40°F-1,65m3, 45°F-1,46m3,
50°F-1,32m3, 60°F-1,1m3.
* Max. flow 0,54m3/h
* Dimensions Luxury I - Base (mm): 605x350 * Height (mm): 670
Model Specifications 15000105-15 15lt. resin. (for 3/4 people)
* Exchange capacity: 90ºHFxm3.
18 January 2021 26/103
Change language