18.01.2021 Views

Water softeners catalog

We are a wholesale supplier of products, solutions and services in water treatment. We provide only businesses companies such as distributors, retailers, manufacturers and assemblers. A catalog that includes products carefully selected from the most prestigious brands in the Water Treatment market, operative site, personalized services, logistics precise and efficient, flexible organization, but also the basic importance that is attributed to human factors and relationships with partners, are of Sinergroup Srl a reference for many companies of the sector.

We are a wholesale supplier of products, solutions and services in water treatment.
We provide only businesses companies such as distributors, retailers, manufacturers and assemblers.

A catalog that includes products carefully selected from the most prestigious brands in the Water Treatment market, operative site, personalized services, logistics precise and efficient, flexible organization, but also the basic importance that is attributed to human factors and relationships with partners, are of Sinergroup Srl a reference for many companies of the sector.

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Features:

* Simple and intuitive programming

* Solid state microprocessor with settings from front panel.

* Large LCD display.

* 48 hours of internal power backup.

* Real day time in hours and minutes.

* Residual volume of softened water.

* Display of regeneration phases and cycle remaining time.

* Fast and easy configuration of regeneration capacity, time and day.

* The set program remains in memory and will not be lost in case of power outages.

* Electronic regenerations step-by-step.

* Regeneration manual, delayed or immediate.

* Lack salt alarm.

Benefits and advantages

Reduction of water hardness, which is cause of scale. ENERGY SAVING: the device prevents formation of

deposits in pipes and hydraulic lines. Greater sense of wellness during shower. Skin soft and clean.

Increased duration of appliances and boilers. COST SAVING: reduction in use of soaps, fabric softeners

and chemicals. Reduced maintenance costs. Fully automatic operation. It should just worry about adding

salt in water softner.

Increased sodium (for drinking water)

Most of the sodium consumed is taken with foods, especially ones obtained with industrial processing. Salt

is a great preservative and therefore is used as an additive for processed products. The assumption of

sodium with the water we drink is relatively low compared to that which is taken with food. All softeners to

produce softened water through ion exchange resins in, produce softened water output sodium ions. The

recommended sodium limit for water intended for human consumption is 200ppm liter. Depending on

sodium concentration and water hardness, it is possible that water presents an higher sodium concentration

than recommended. Where this is the case or if you need to follow a low salt content, it is advisable to

install a domestic reverse osmosis for drinking water.

Specifications

* Min. pressure: 1.4 bar (1.4 kg/cm2)

* Max. pressure: 8.6 bar (8.6 kg/cm2)

* Min. temperature: 4 ° C

* Max. temperature: 43 ° C

* Water Input / Output 1" male thread

* Exhaust: hose connector with 2m. of tube

* Overflow: hose connection 3/8 "

Model Specifications 15000204-08 8lt. resin (for 1/2 people)

* Exchange capacity: 41,6ºHFxm3.

* Salt consumption for regeneration: 1,04 Kg./salt.

* Water consumption for regeneration: 56lt.

* Quantity of treated water for regeneration, 30°F-1,38m3, 35°F-1,18m3, 40°F-1.04m3, 45°F-0,92m3,

50°F-0,83m3, 60°F-0,69m3.

* Max flow. 0,32m3/h

Model Specifications 15000204-12 12lt. resin (for 2/3 people)

* Exchange capacity: 62,4ºHFxm3.

* Salt consumption for regeneration: 1,56 Kg./salt.

* Water consumption for regeneration: 84lt.

* Quantity of treated water for regeneration, 30°F-2,08m3, 35°F-1,78m3, 40°F-1,56m3, 45°F-1,38m3,

50°F-1,24m3, 60°F-1,04m3.

* Max flow. 0,54m3/h

Model Specifications 15000204-15 15lt. resin (for 3/4 people)

* Exchange capacity: 75ºHFxm3.

18 January 2021 40/103

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!