You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
An iso 9001:2015 certified company
We Provide Customize heating Solution
Heating ovens
About Us.
SCARLET is a manufacturing company developing electric heating products for use around the
world since 2010 With uncompromised dedication to our customers, we offer solutions and not just products.
Our development in oil and gas industries, renewable energy, HVAC systems and government projects help
customer like you to get alternative solutions for your projects to get off the ground in the most cost efficient
way. Scarlet Alloys wire strive to tailor the technology and knowhow to design ever more
efficient heating systems and solutions for your needs.
SAWHEAT® offers the best quality products that meet industrial standards requirements as well as our own
internal quality assurance methodology that earned the respect of the thousands of clients served by our
products.
Our products are made in INDIA and make it easier for working people to get the best value possible on topquality
heaters & heating Furnaces they could trust.
Our mission to offer our customer the best possible service has made SAWHEAT the most
trusted manufacturer for heating elements and electric furnaces with thousands of satisfied customers taking
advantage of our low prices and satisfaction guarantee…
Regd. Office :
11, POLLOCK STREET, Room No. 14 & 15
(Near Ezra Street Market ) Kolkata – 700001 ( WEST BENGAL)
Tel :- 033-39850144, +91 9831186428 ,
+91 8337086428 , 7003959303
Email: Scarlet.alloys@Gmail.com ,Factory_scarlet@gmail.com
Website: WWW.SCARLETALLOYSWIRE.IN
INDIA
Factory Address:
Mzi Industrial ,Kalagachia Main RoadThakurpukur
SAKARIPOTA Kolkata – 700063
( West Bengal)
Our Vision
DESIGN : SAWHEAT® offers the best quality products that meet industrial standards requirements as well as our own internal
quality assurance methodology that earned the respect of the thousands of clients served by our products.
BUILD : Our products are made in INDIA and make it easier for working people to get the best value possible on top-quality
heaters & heating Equipment’s they could trust.
PERFORM : Our mission to offer our customer the best possible service has made SAWHEAT the most trusted manufacturer
with thousands of satisfied customers taking advantage of our low prices and finest quality products .
Our Solution
First : A strong research and development (R&D) focus both internally with new product and process development and externally
with client-sponsored research projects.
Second: We provide thermal engineering solutions provided by our team of design and applications engineers, utilizing existing
and new technology developments in the area of thermal management to devise novel and innovative solutions to customer
challenges in industrial processing.
Third: Scarlet Alloys Wire aims to be a full-service supplier, providing a wide range of thermal electric and auxiliary products that
enable our customers to get a complete solution from a single source.
Our Esteem Clients
FLEXIBLE LAB OVEN DESIGN
These industrial lab ovens are constructed with welded
Mild steel/ Steel sheet and quality components
throughout. Laboratory Ovens are available 230V
voltage. 415V as per custom requirements . laboratory
ovens come with a limited warranty and are factory
wired and tested prior to shipping. Can be ordered in
standard sizes at varying maximum temperatures or as
per customer requirement .
BASIC MODEL
•Inside chamber made from mild steel,
•2 shelves,
•Outside casing in metal sheet, powder painting grey,
•Control box on the under part,
•Four sides heating,
•Natural air circulation without air fan,
•Insulation – rock wool (complete lack of asbestos),
•Door opens to the right, inner door in stainless steel, silicon joint,
• temperature controller,
•Low electric power usage for increased energy efficiency,
•Short heating up / cooling down period.
OPTIONS
•Additional standard shelves
•Reinforced shelves
•Metal tray
•Digital timer
•Buzzer
•Over-temperature protection
•Data communication/USB
•Calibration of temperature measurement system
•Oven exterior made of stainless steel
•Stand for supporting the oven
•Additional 1 year warranty
Useful volume Liter 24
Rated power not more then kW 2
Rated supply voltage Volt 230
Rated frequency Hz 50
Number of phases – 1
Continuous operating temperature °C T+10-200
Maximum temperature °C 200
Working chamber material – Mild steel
Working chamber surroundings –
Shelves (number) 2
Maximum heating- up time (without charge) Min. 40
Temperature stability in working chamber at rated
temperature in thermal steady state without charge not
more then ±°C 1
Temperature uniformity in working space at rated
temperature in thermal steady state with charge not more
then ±°C 15
working chamber dimensions:
Air (without
hot air fan)
width mm 300
depth mm 380
height mm 200
Outside dimensions:
width mm 400
depth mm 515
height mm 410
Mass kg 10
Chamber ovens up to 350°C – 650 °C
BASIC MODEL
•Equipped with non-programmable controller
•Control panel on the left/right side (depending on customer needs)
•Adjustable air supply / extraction
•Ventilation motor on the top, vertical air flow
•Heating from 2 sides with tubular (U-shaped) heating elements
•Insulation made from rock wool
•Outside casing – metal sheet, powder painted grey ,frame – black
•Door opening to left/right side (depending on customer needs)
•Fitted with standard shelves, 2 pcs.
•Low power consumption
•Short heating/cooling time
•High level of accuracy
•Door safety switch
•OTP (over temperature protection),relay
•1 year warranty
OPTIONS
•Additional shelves
•Reinforced shelves
•Reinforced bottom
•Ventilation motor on the rear, horizontal air flow
•Automatic air vent control
•Digital timer
•Data recorder
•Data communication/USB
•Calibration and maintenance of temperature measurement system
•Stainless steel oven exterior
•Oven mounting platform
•Additional 1 year warranty
Walk In Chamber ovens up to 350°C – 650 °C
BASIC MODEL
•Equipped with non-programmable controller
•Control panel on the left/right side (depending on customer needs)
•Adjustable air supply / extraction
•Ventilation motor on the top, vertical air flow
•Heating from 2 sides with tubular (U-shaped) heating elements
•Chamber made from mild or stainless steel
•Thermal insulation made from rock wool
•Outside casing – metal sheet, powder painted grey frame – black
•Door opening to left and right sides
•Low power consumption
•Short heating/cooling time
•High level of accuracy
•Door safety switch
•OTP (over temperature protection)
•1 year warranty
OPTIONS
•Ventilation motor on the rear, horizontal air flow
•Automatic air vent control
•Digital timer
•Data communication/USB
•Stainless steel oven exterior
•Additional 1 year warranty
ELECTRODE DRYING PORTABLE OVEN
Low temperature resistive electric oven a dry storage container intended for
drying, dry storage or transportation of welding electrodes.
BASIC MODEL
•Maintains up to 10 kg of 45 cm electrodes;
•2 containers for electrodes storage are inside;
•Temperature range + 60-+320 C, temperature is adjustable;
•Outside casing – metal sheet, powder painted grey;
•Durable Steel construction means long product life;
•Oven is comfortable for transportation;
•Fitted wheels and handle helps moving the electric oven and place it to the
right place in the work area;
•Thermal insulating wool makes oven energy efficient, keeps electrodes hot and
moisture-free.
Technical data Dimension SAWHEAT EDO /10
Useful volume Liter 3
Rated power not more than kW 1.0
Rated supply voltage V 230
Rated frequency Hz 50
Number of phases – 1
Rated temperature °C 320
Atmosphere in the chamber – Air
Maximum heating- up time (without charge) Min. 15
Oven working chamber dimensions:
width mm 100
length mm 500
height mm 125
Oven external dimensions:
width mm 230
length mm 740
height mm 435
Weight kg 12
ELECTRODE DRYING OVEN
Temperature Range: The standard temperature range of a laboratory hot air
oven is ambient+10°C to 250°C; we also make high temperature hot air ovens
with maximum temperature range up to 300°C, 350°C and 400°C.
Temperature Controller: It is the backbone of any hot air oven, we always
equip our hot air ovens with imported and branded PID temperature
controllers that feature auto-tuning and display both set value (SV) and
process value (PV). It is also responsible for accuracy of temperature during
the entire cycle.
Heating Element: Tubular air heaters are considered best for hot air oven;
these elements are ISI mark and from reputed brands in the market and
offer fast heat up using minimum energy consumptio.
Air Circulation: In order to circulate uniform air throughout the chamber
forced air circulation is achieved by motorized blower. We use only branded
motor and blower assembly for this purpose. It is fitted at rear side or top
side of the chamber as per convenient.
Construction: Rugged construction is prime requisite of any hot air oven.
Our ovens are made of thick stainless steel sheets that are nicely jointed
through arc welding. External cabinet is usually made of powder coated GI
sheet and for GMP models; all SS 304 sheets are used.
Optional Accessories: We also offer many optional features and accessories
with our hot air oven such as we can also equipment these units with data
logging and monitoring device, digital soak timer, toughened glass window.
Useful volume Liter 75
Rated power not more than kW 4.0
Rated supply voltage V 230
Rated frequency Hz 50
Number of phases – 1
Rated temperature °C 350
Atmosphere in the chamber – Air
Maximum heating- up time (without
charge)
Min. 100
Limits of automatic temperature
adjustment
°C 50-350
Furnace working chamber dimensions:
width mm mm 390
length mm mm 530
height mm mm 390
Furnace external dimensions:
width mm mm 675
length mm mm 700
height mm mm 610
Weight kg 51