scarlet heating ovens

FLEXIBLE LAB OVEN DESIGN
These industrial lab ovens are constructed with welded
Mild steel/ Steel sheet and quality components
throughout. Laboratory Ovens are available 230V
voltage. 415V as per custom requirements . laboratory
ovens come with a limited warranty and are factory
wired and tested prior to shipping. Can be ordered in
standard sizes at varying maximum temperatures or as
per customer requirement .
BASIC MODEL
•Inside chamber made from mild steel,
•2 shelves,
•Outside casing in metal sheet, powder painting grey,
•Control box on the under part,
•Four sides heating,
•Natural air circulation without air fan,
•Insulation – rock wool (complete lack of asbestos),
•Door opens to the right, inner door in stainless steel, silicon joint,
• temperature controller,
•Low electric power usage for increased energy efficiency,
•Short heating up / cooling down period.
OPTIONS
•Additional standard shelves
•Reinforced shelves
•Metal tray
•Digital timer
•Buzzer
•Over-temperature protection
•Data communication/USB
•Calibration of temperature measurement system
•Oven exterior made of stainless steel
•Stand for supporting the oven
•Additional 1 year warranty
Useful volume Liter 24
Rated power not more then kW 2
Rated supply voltage Volt 230
Rated frequency Hz 50
Number of phases – 1
Continuous operating temperature °C T+10-200
Maximum temperature °C 200
Working chamber material – Mild steel
Working chamber surroundings –
Shelves (number) 2
Maximum heating- up time (without charge) Min. 40
Temperature stability in working chamber at rated
temperature in thermal steady state without charge not
more then ±°C 1
Temperature uniformity in working space at rated
temperature in thermal steady state with charge not more
then ±°C 15
working chamber dimensions:
Air (without
hot air fan)
width mm 300
depth mm 380
height mm 200
Outside dimensions:
width mm 400
depth mm 515
height mm 410
Mass kg 10