23.12.2012 Views

Spraying adhesives - Walther Spritz- und Lackiersysteme GmbH

Spraying adhesives - Walther Spritz- und Lackiersysteme GmbH

Spraying adhesives - Walther Spritz- und Lackiersysteme GmbH

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Adhesive <strong>Spraying</strong> System 1 Adhesive <strong>Spraying</strong> System 2 Adhesive <strong>Spraying</strong> System 3<br />

Spray gun specially for <strong>adhesives</strong><br />

Delivery includes:<br />

Manual spray gun PILOT III K<br />

with plastic gravity-feed cup<br />

450 cc, rotary nozzle<br />

diameter 1.5 mm and<br />

air cap. Further air cap / nozzle<br />

systems are available on request.<br />

This manual spray gun can easily be<br />

converted. Simply seal the cup connection<br />

and remove the stopper for the lower<br />

connection. You can now spray adhesive<br />

from pressure tanks or pumps – without<br />

buying a new spray gun.<br />

Pressure tank for use with 30-litre drums<br />

Basic version. Delivery includes:<br />

● Manual spray gun PILOT III K (for <strong>adhesives</strong>) with<br />

connection to pressure tanks, nozzle diameter<br />

1.5 mm and air cap.<br />

● Material pressure tank MDG 45, galvanised version, incl.<br />

fittings, pipe to material outlet in stainless steel, designed<br />

for a max. pressure of 6 bar. For connection of a spray gun,<br />

the compressed air inlet fitting is equipped with an additional<br />

compressed air reduction valve.<br />

● Hose set for compressed air and material including all<br />

connection fittings.<br />

Extended version.<br />

Delivery includes:<br />

as above, but with an additional<br />

spray gun PILOT III K for a further<br />

workplace as well as an additional<br />

compressed air reduction valve.<br />

PILOT<br />

Pressure tanks offer decisive<br />

advantages in transferring the<br />

adhesive to the spray gun:<br />

● Secure storage of the material<br />

● Pulsation-free transfer<br />

● No hardening<br />

● No skin formation of the surface<br />

Important:<br />

Do not pour the adhesive directly<br />

into the pressure tank. Place the<br />

drum containing the adhesive<br />

in the pressure tank.<br />

This avoids time-consuming<br />

tank cleaning.<br />

For 10-litre or 15-litre<br />

cans, we recommend<br />

the pressure tank<br />

MDG 22.<br />

Pump for use with 200-litre barrels<br />

Basic version.<br />

Delivery includes:<br />

● Spray gun PILOT III K, version for<br />

connection to pumps or tanks, rotary<br />

nozzle, diameter 1.5 mm, and air cap<br />

● “Vesir” barrel pump for 200-litre bung<br />

hole barrel with fitted compressed air<br />

reduction valve<br />

● Hose set for compressed air and material<br />

including all connection fittings.<br />

Extended version.<br />

Delivery includes:<br />

as above, but with an additional<br />

spray gun PILOT III K for a<br />

further workplace as well<br />

as an additional compressed<br />

air reduction valve.<br />

PILOT

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!