Spraying adhesives - Walther Spritz- und Lackiersysteme GmbH
Spraying adhesives - Walther Spritz- und Lackiersysteme GmbH
Spraying adhesives - Walther Spritz- und Lackiersysteme GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Adhesive <strong>Spraying</strong> System 4<br />
for automatic spray guns and 1.000-litre<br />
containers or 200-litre barrels<br />
1000-litre container for<br />
solvent-based <strong>adhesives</strong><br />
Delivery includes:<br />
● Automatic spray guns<br />
PILOT WA XV for even coating<br />
of all sides of a workpiece.<br />
Rotary-jet nozzle with 1.5 mm<br />
nozzle diameter and air cap<br />
● Piston-pump for 200-litre bung hole<br />
barrel with fitted compressed air<br />
reduction valve<br />
● All other necessary components<br />
can be supplied on request.<br />
Option:<br />
System as described<br />
above but with the<br />
spray gun fitted with<br />
ro<strong>und</strong>-jet adhesive<br />
air caps<br />
Adhesive spraying systems<br />
with automatic spray guns<br />
are not available “off the<br />
peg”. Please contact us.<br />
We will be happy to plan<br />
the optimum system<br />
together with you.<br />
Spray booths<br />
Adhesive spray booths<br />
Type 2000 in various sizes<br />
The 1.10 m and 1.50 m wide basic<br />
elements of the 2000 Series can be<br />
joined together to form any width<br />
required. The folding support frame<br />
allows filters to be changed easily<br />
and quickly. It also ensures that the<br />
filter mat (multi-layer paper filter)<br />
is held securely in place.<br />
Basic version: spray wall without<br />
lower frame. Optional: lower frames<br />
in the sizes required.<br />
Compressed air fittings<br />
All of the adhesive spraying systems shown here<br />
require filtered compressed air.<br />
Left: H1 compressed air filter with compressed<br />
air reduction valve.<br />
Centre: H2 compressed air unit with stop valve,<br />
filter, unreduced extraction valve, reduction valve.<br />
Right: Type A compressed air unit – as H2 but with<br />
additional reduction valve.<br />
WALTHER <strong>Spritz</strong>- <strong>und</strong> <strong>Lackiersysteme</strong> <strong>GmbH</strong><br />
Kärntner Str. 18-30 · D-42327 Wuppertal<br />
Tel.: D-202/787-0 · Fax: D-202/787-217<br />
info@walther-pilot.de<br />
www.walther-pilot.de<br />
Spray gun<br />
cleaning set<br />
<strong>Spraying</strong> Systems for<br />
Solvent-Based Adhesives<br />
<strong>Spraying</strong> <strong>adhesives</strong>:<br />
economical, efficient and material-friendly
Adhesive <strong>Spraying</strong> System 1 Adhesive <strong>Spraying</strong> System 2 Adhesive <strong>Spraying</strong> System 3<br />
Spray gun specially for <strong>adhesives</strong><br />
Delivery includes:<br />
Manual spray gun PILOT III K<br />
with plastic gravity-feed cup<br />
450 cc, rotary nozzle<br />
diameter 1.5 mm and<br />
air cap. Further air cap / nozzle<br />
systems are available on request.<br />
This manual spray gun can easily be<br />
converted. Simply seal the cup connection<br />
and remove the stopper for the lower<br />
connection. You can now spray adhesive<br />
from pressure tanks or pumps – without<br />
buying a new spray gun.<br />
Pressure tank for use with 30-litre drums<br />
Basic version. Delivery includes:<br />
● Manual spray gun PILOT III K (for <strong>adhesives</strong>) with<br />
connection to pressure tanks, nozzle diameter<br />
1.5 mm and air cap.<br />
● Material pressure tank MDG 45, galvanised version, incl.<br />
fittings, pipe to material outlet in stainless steel, designed<br />
for a max. pressure of 6 bar. For connection of a spray gun,<br />
the compressed air inlet fitting is equipped with an additional<br />
compressed air reduction valve.<br />
● Hose set for compressed air and material including all<br />
connection fittings.<br />
Extended version.<br />
Delivery includes:<br />
as above, but with an additional<br />
spray gun PILOT III K for a further<br />
workplace as well as an additional<br />
compressed air reduction valve.<br />
PILOT<br />
Pressure tanks offer decisive<br />
advantages in transferring the<br />
adhesive to the spray gun:<br />
● Secure storage of the material<br />
● Pulsation-free transfer<br />
● No hardening<br />
● No skin formation of the surface<br />
Important:<br />
Do not pour the adhesive directly<br />
into the pressure tank. Place the<br />
drum containing the adhesive<br />
in the pressure tank.<br />
This avoids time-consuming<br />
tank cleaning.<br />
For 10-litre or 15-litre<br />
cans, we recommend<br />
the pressure tank<br />
MDG 22.<br />
Pump for use with 200-litre barrels<br />
Basic version.<br />
Delivery includes:<br />
● Spray gun PILOT III K, version for<br />
connection to pumps or tanks, rotary<br />
nozzle, diameter 1.5 mm, and air cap<br />
● “Vesir” barrel pump for 200-litre bung<br />
hole barrel with fitted compressed air<br />
reduction valve<br />
● Hose set for compressed air and material<br />
including all connection fittings.<br />
Extended version.<br />
Delivery includes:<br />
as above, but with an additional<br />
spray gun PILOT III K for a<br />
further workplace as well<br />
as an additional compressed<br />
air reduction valve.<br />
PILOT