Home Of The Minimizer™

Home Of The 

Minimizer 

1

2 

EXTREMEPerformance 

Every fender has a unique lip that provides 

for superior control of water spray and 

rocks to keep your equipment and loads 

cleaner. 

They cover wheels completely and are particularly 

useful on multi-axle applications -- when dented 

or crushed they bounce back to shape. Our 

polyethylene material simply lasts longer than any 

other product. It’s extremely durable, impervious 

to salt and holds up in 100º F below zero to 197º 

F above zero.

ULTIMATEDurability 

Searching for a set of brackets that won’t 

bend out of shape with the slightest tap or worse 

yet ones that break and do nothing but cost you 

your hard earned money. We at Minimizer can 

bring that seemingly unattainable goal to an abrupt 

end with two words...*LIFETIME WARRANTY. 

When you do the math on that it always equals no 

extra money out of your pocket. How can we do 

that you ask? It’s simple, we have absolute 

confidence in our products design and performance. 

Minimizer poly brackets are designed for 

strength -- they won’t stress crack, never need 

painting and they soften road vibration. Poly 

brackets have remarkable staying power -- when 

bumped or bent they ‘give’ slightly and spring 

back into shape without dents or paint chips. 

These poly brackets will last as long as you own 

your Minimizer Poly Fenders -- we guarantee it. 

So upgrade your equipment, upgrade your 

life. Use the best fender bracket system available 

offered exclusively by Minimizer distributors 

worldwide. 

The still photo on the right 

shows you just how much 

these brackets and fenders 

from Minimizer can handle. 

Just look at the force being 

applied to that bracket!! 

*Lifetime warranty on brackets will cover stress cracks due to road vibration when mounted using SCSI bolts while following SCSI mounting 

instruction guide lines. The warranty does not cover or imply to cover anything other than the replacement cost of the bracket. The warranty 

does not cover impact breaks, accidents or installation failures. 3

4 

STANDARD 

✓ 

✓ 

✓ 

✓ 

✓ 

4 Pre-molded Colors Available 

FENDER CHECKLIST 

Never needs paint---Color is molded throughout so chips, 

scuffs and scratches can’t be seen. 

Never fades---UV inhibitors are built into the material. 

Never rusts---Material is 100% polyethylene. 

Never stress cracks---This unique material is not affected by 

road vibration. 

Never needs polishing---Simply clean with soap and water. 

Manufactured by Spray Control Systems, Inc (SCSI), 500 Minimizer Way • Blooming Prairie, MN 55917 

800.248.3855 • Fax: 888.583.7540 • www.minimizer.com

Double Duece Shown 

DIAMOND PLATE 

Available In 

Silver and Black 

Minimizer Poly-Fenders that look like diamond plate 

metal ... but last like our incredible Poly-Fenders. 

Tired of fenders denting, cracking or rusting, 

but like the look of diamond plate? 

Diamond plate poly is availble for most of our 

fender styles ... a timeless great look, 

but with the durability of “never-dent” poly. 


800.248.3855 • Fax: 888.583.7540 • www.minimizer.com 

5

6 

LIQUID PLATIUM 

An industry breakthrough! 

Minimizer Poly-Fenders that look like 

shiny metal ... but last like our incredible 

Poly-Fenders. 

Tired of fenders denting, cracking or rusting, but crave 

the beautiful shine of metal fenders? Liquid Platium 

finished Poly-Fenders are for you. These fenders are 

made from a TPO material that’s laminated with the 

same Class A finish film widely used in the automotive 

industry. Fenders shine up with soap and water with 

NO buffing ... ever. 

Liquid Platium is currently available in many styles: 

MIN400 (p.32) and MIN150 (p.22) 



Minimizer Poly-Fenders 

now come in a paintable version. 

Your body shop specialist 

can paint them to 

match just about any color. 

The shine and finish rival 

fiberglass or metal ... but our 

Poly-Fender’s legendary 

durability stands alone. 

Step 1 

SCSI molds the fender out of a TPO poly 

material to ensure durability 

and paint adhesion. 

Step 2 

PAINTABLE 

SCSI bakes on a unique adhesion promoter 

to make certain every square inch of 

paint on your fender holds tight. 

Step 3 

Have the body shop of your choice prime 

and paint with a custom color to complete 

the transformation from an ordinary truck 

to a work of art. 



7

8 

MIN1600 

The One Ton 

MIN1600 Fenders 

Custom Brackets 

Fender Series 

MIN1600 is designed to fit a single axle with 16.5" wheels. 

The set consists of 2 pieces (2 - PM1601 single fenders). 

The total weight of the MIN1600 fender kit is less than 11 pounds. 



Fender Set For 

Dual 16.5” Wheels 

“Just wanted to send you a 

picture of my new truck. The 

install was simple- 

I love my fenders.” 

B100BTSA - stainless bolt-on kit B100BTPA - plastic bolt-on kit B100WOA - weld-on kit 



Hugh Bagley, 

Pittsburgh, PA 

9

10 

MIN1900 

Lil’ Scrapper 


B100BTPA Brackets 

Fender Series 


Works great for a super single. 







“These fenders do a great 

job of controlling spray and 

keeping my truck clean” 




Bob Jorgenson, 

Possumtrot, MS 

11

12 

MIN2200 

TT Twin 



Fender Series 

MIN2200 is designed to fit 22.5" wheels. 







“I love the product 

so much 

I bought 

the company!” 




13

14 

MIN2400 

The Texas Double 


B100BTSA Brackets 

Fender Series 




Optional lightbox can be molded onto the rear section as 1 piece and 

has a backing plate to protect wiring. 





“Iʼm impressed with the 

“showroom like” looks after 

thousands of miles on the 

road and years of abuse” 




15

16 

MIN161200 

The Loaner 


Steerable Bracket Kit 

Fender Series 

MIN161200 is designed to fit a single 16.5" tire up to a low-profile 

22.5” tire (255 70R 22.5). 

Works great for steerable axles (see optional steerable bracket kit on page 57). 

The set consists of 2 pieces (2-PM1612 fender sections). 





Single Wheels 

38” 

3” 

12.5” 

“In the past the vibration tore 

up my aluminum fenders. 

Now, my fenders are 

outlasting my truck” 

John Iacovino, 

N. Topsail Beach, NC 

Lift Axle Bracket Kits Steerable Axle Bracket Kits Steerable Axle Bracket Kits 



12” 

17

18 

MIN221800 

18 & Single Fender Series 

PM2218 Fenders 


MIN221800 is designed to fit a single 22.5" or 24.5" wheel. 

The set consists of 2 pieces. (2-PM2218 fender sections) 

The total weight of the MIN221800 is less than 16 pounds. 

MIN221800 works great on super singles such as the X One. 



For Single Wheels 

Up To 24.5” 

42” 

“The sales people are very 

knowledgeable and helped 

me decide on the fenders 

that best suited my needs.” 




19

20 

MIN100 #1 



Fender Series 

MIN100 is designed to fit a single axle with 22.5" or 24.5" wheels. 

The set consists of 4 pieces (2 - PM101 front sections and 2 - PM102 rear sections). 


Optional lightbox can be molded onto the rear section as 1 piece and 

has a backing plate to protect wiring. 



Single Fender For Dual 

Wheels Up To 24.5” 

“I went with singles and a lightbox. 

Iʼve never had fenders that 

were this easy to maintain, these 

fenders are show stoppers.” 

Troy McDonald, 

Cartersville, GA 




21

22 

MIN150 

Eyebrow 



Fender Series 

MIN150 is designed to fit 22.5" or 24.5" wheels. 





Fender Set For Dual 

Wheels Up To 24.5” 

“My experiences with both 

the company and the 

product were terrific.” 

Also available in 

Liquid Platium 

(see pg.6) 




23

24 

MIN1500 

Square Back Bruiser 



Fender Series 

MIN1500 is designed to fit a tandem axle tractor or trailer. 

The set consists of 4 pieces (4 - PM1501 fender sections). 


Optional lightbox can be molded onto the rear section as 1 piece and has a 

backing plate to protect wiring. 



Tandem Axle Set 

"I wanted something that 

had the same square-backed 

look as my truck. This model 

seems to fill the bill." 

Kyle Severtson 

Springfield, MO. 


26” 



25

26 

MIN200 

The Original 



Fender Series 






Tandem Axle Fender Set 

“The best looking part of my 

truck is my fenders.” 

B200BTPA - plastic bolt-on kit B200WOA - weld-on kit 



Sam Tucker, 

Bixby, MT 

27

MIN300 

The Triple Threat 

28 



Fender Series 

MIN300 is designed to fit a tri-axle tractor or trailer. 

The set consists of 6 pieces (4 - PM201 front and rear sections and 

2 - PM301 center sections). 


Optional trim plates are available. 



Tri-Axle Fender Set 

“The first time a gooseneck 

rubbed these, I thought they 

were trashed. When I 

jumped out and looked, I 

couldnʼt even tell theyʼd 

been hit!” 




29

30 

MIN318 

Rolling Triples 



Fender Series 

MIN318 is designed to fit a tandem axle with a single wheel pusher axle. 

The set consists of 6 pieces (2 - PM201 rear sections, 2 - PM301 center sections and 

2 - PM218 front sections). 






With Single Wheel Pusher 

“Iʼve heard these fenders 

were for garbage trucks. 

Funny thing is, the only 

garbage Iʼve ever had on 

my rig were my previous 

metal fenders.” 

Terry Altmann, 

Houston, TX 




31

32 

PM202 -302-1021 

The Trasher 

PM202/302/1021 Fenders 


Fender Series 

PM202/302/1021 are designed to fit a tandem axle with a single wheel pusher axle. 

The fender set is sold per individual piece. The rear section is the PM202, center 

section is the PM302 and the front single wheel section is the PM1021. 

The total weight of the PM202/302/1021 fender set is less that 44 pounds for all 6 pieces. 





With Single Wheel Pusher 

“Do yourself, and your truck, 

a favor and let the Minimizer 

make a believer out of you.” 




Bill Jacobs, 

Fargo, ND 

33

34 

MIN400 

The Work Horse 



Fender Series 






Full Tandem Axle Set 

“My line of work is 

demanding and hard on 

equipment but I never worry 

about my fenders... 

...Never.” 




Also Available In 


(see pg. 6) 

35

36 

MIN450 

The Half Horse 



Fender Series 

MIN450 is designed to fit a tandem axle tractor or trailer as a half fender. 





Half Fender Set 

“The back of my day cab has 

never looked so nice.” 




Ron Elling, 

Independence, IA 

Also Available In 


(see pg. 6) 

37

38 

MIN1300LLP 

The Double Deuce 


MIN1300LPL Fenders 


Fender Series 


The set consists of 4 pieces (4 - 1301 fender sections). 


Optional lightbox can be molded onto the rear section as 1 piece and has a backing 

plate to protect wiring. 




52” 

102” 

PB5015A 

Backing Block 

PM1301 

22” radius 

52” 

PB501026A 

PM1301 

25.5” 

PM1302L 

“Hereʼs some pictures of my 

new truck. I love the way the 

fenders follow the profile of 

the wheels.” 

B9900BTSA - stainless bolt-on kit B9900BTPA - plastic bolt-on kit B9900WOA- weld-on kit 



39

40 

MIN500 

Straight Shooter 



Fender Series 


The set consists of 6 pieces (2 - PM101 front sections, 2 - PM501 center sections and 

2 - PM102 rear sections). 







“Compre estos guardabarros 

porque los son mejores del 

mercado.” 

“I bought these fenders 

because they are the best on 

the market.” 




41

42 

MIN600 

The Long Shot 



Fender Series 

MIN600 is designed to fit a tri-axle tractor or trailer. 








Tri-Axle Set 

“Concrete doesnʼt even stick 

to my fenders, I just hose 

them off and they look 

brand new again.” 




Gus Stevens, 

Corson, SD 

43

44 

MIN700 

Flat Top 

MIN700L Fenders 


Fender Series 










R18.5” 

PM702L 

“Why would you buy 

fenders that require 

attention when you can 

own some that get it?” 




45

MIN730S 

Long & Streamlined 

46 

MIN730S Fenders 

B600BPTA Brackets 

Fender Series 

MIN730S is designed to fit a tri-axle tractor or trailer. 



The total weight of the MIN730S fender kit is less than 80 pounds. 





Tri-Axle Set 

PM702L 

“I canʼt believe fenders that 

look this good can take what 

my work day dishes out.” 




Henry Gerth, 

Winona, MN 

47

48 

MIN800 

The Brute 



Fender Series 









“I was very pleased with the 

quick delivery and ease of 

installation. Poly fenders 

have really come a 

long way.” 




49

50 

MIN850 

The Brute Half 



Fender Series 







“My lowboy trailer has come 

down on my fenders several 

times, but youʼd never know it 

by lookinʼ at them.” 




51

52 

MIN9900 

Millennium 



Fender Series 


The set consists of 4 pieces (2 - PM9901 front fender sections and 

2 - PM9902 rear fender sections). 





“In the past I had nothing but 

problems with my aluminum 

fenders. Since Iʼve switched 

to Minimizer, my problems 

are gone.” 




53

54 

MIN9950 

The Millenium Half 



Fender Series 




Optional splash guard available. 




“If having the most durable 

fender on the market is a 

crime... 

...Iʼm guilty as charged.” 




55

56 

MINTF102 

Trailer 

MINTF102 Fenders 


Fenders 

MINTF102 is designed to fit the front of a tanker trailer. 

The set consists of 6 pieces (4 - PM501 flat sections, and 2 - PM102 rear sections). 

The total weight of the MINTF102 fender kit is less than 49 pounds. 





Tanker Fender Set 

PM702 

“Our poly fenders have a 

lifetime warranty, which is 

more than I can say for my 

last 3 sets of aluminum.” 




Bill & Cindy Tollefson, 

Salt Lake City, UT 

57

58 

CONSTRUCTION 

Armadillo, Grader, Loader, Lift 

Armadillo fender measures 16” wide Grader fender measures 20.5” wide 

The Minimizer “Armadillo” 

IND-1100 Poly-Fender 

Ideal for keeping mud off operator’s windows and 

mirrors. Improve your organization’s safety record by 

keeping operator’s area protected. 

Forever shape pops back after impact. It will not 

stress crack. Fits on application where metal fenders are 

simply not practical. 

Superior control of water spray and rocks keep 

equipment and loads cleaner. 

The Minimizer 

Road Grader Series 



keeping operator’s area protected. 


stress crack. 

Superior control of water spray and rocks keep 





Loader Series 



keeping operators area protected. 


stress crack. Made to fit CAT 980G loaders. 

Superior control of water spray and rocks keeps 



Auxiliary Lift Poly-Fender 



keeping operators area protected. 


stress crack. Fits on bridge axle applications where metal 

fenders are simply not practical. 

Superior control of water spray and rocks keeps 




59

60 

SERVICE PARTS 

The Right Part, Right Now -- Same Day Shipping On Replacement Parts 

Hey, Minimizer products are tough ... made to take a beating. But on the rare occasion 

that you need a replacement part -- a bracket, a bolt, an individual fender ... whatever -it’s 

my job to make sure you get it fast. I keep a complete inventory of every part we sell. 

So if you happen to need a replacement part for anything we sell, call me direct any day 

by 2 p.m. and I’ll get it shipped from my dock that same day. 

Use my direct telephone number -- 877-583-2358 between 8 a.m. and 2 p.m. It’s tollfree, 

and you’ll (almost) never talk to a machine. Call and I will make sure you get the 

right part ... right now. 


800.248.3855 • Fax: 888.583.7540 • (Service Parts 877.583.2358) • www.minimizer.com

LED LIGHTS 

62 

LED 4” Round Stop, Turn & Tail Lights 

Our 12 diode LED lights are brighter and therefore safer than any 

incandescent light on the market. No more “burned out” tail lights ... if one of 

the 12 diodes should ever fail, 11 are still on the job. This standard 4” model 

is made to perfectly fit the openings of our fender light box option. 

4” Grommet 

Included with your LED light 

purchase is our black poly 

mounting grommet. It fits 

perfectly into our fender 

openings and the seal 

around your light keeps 

weather out. 

4: Round Decorative 

Bezel 

It’s attractive, it accents your LED 

lights beautifully and the chrome 

finished bezel fits perfectly around 

our LED lights. It’s the kind of 

attention to detail a “pride-n-polish” 

guy just loves!

SLICK DISKS 

Slick. Just like the rest of our 

products. 

Protects the 5th wheel against friction and wear 

that can be caused by normal towing. Nearly 

elminates the need for greasing the face of the 

5th wheel plate. Installs in minutes. 

63

TOOL BOXES 

64 

Poly Chest Box 

Two standard sizes: 

20” x 19” x 36” 

30 lbs. 

20” x 19” x 24” 

27 lbs. 

Poly Underbody Box 

Two standard sizes: 

20” x 19” x 36” 

30 lbs. 

20” x 19” x 24” 

27 lbs. 

A three point locking 

system provides for a 

secure and weather proof 

box on an underbody style. 

Five Standard Colors 

Custom colors avialable on fleet orders 

Black 

White 

Yellow 

Gray 

Red 

(Custom colors available on fleet orders)

In The Event Of A Tornado... 

Place Self In Toolbox! 

Poly Toolboxes -- like our fenders -- are tough enough for the most demanding 

worksites and weather. Made of solid molded poly material they never rust, crack 

or need paint. Don’t let their 27 lb. frame fool you -- these boxes are no lightweights. 

They’re tougher than metal boxes weighing 10 times more; and the 3/4” 

gutter and Seal Tight weather stripping means poly-tool boxes are uncannily 

weather-proof. 

Our poly-toolboxes mount easily to most trucks in minutes. Heavy-duty hardware 

keeps the boxes as secure as a safe. 

These boxes are professional grade. 

Do your tools and dunnage deserve anything less? 

Custom “Super Springs” provide for a 

self-lifting door on the chest style boxes. 

The “Vector 

T Latch” is 

number one 

in durability. 

It comes 

with a 

(standard) 

built in 

cylinder lock and two keys. 

Polybox shown in photo is 24” 

With a 3/4” gutter and “Seal Tight” 

weather stripping -- weather-tight. 

65

MUD FLAPS 

66 

Minimizer 

Custom Mud Flaps 

Custom stamped or printed mud flaps 

• Put your logo, telephone number or web site on display while 

protecting your rig and other drivers. (Most trucks average 

10 million sightings per year per truck). 

• Poly or rubber materials are strong and stay stiffer 

on your trailers. 

• These flaps will last for years without fading or 

tearing. 

• We have complete graphic services available for 

your design, typesetting or proofing needs. 

• Over one hundred foil colors available. 

• We’re fast. We’re extremely competitively 

priced -- often our custom printed flaps are less 

expensive than “off the rack” flaps.

WINDOW SHIELDS 

68 

Get a little fresh air, without the wet sleeve. 

Sometimes the best ideas are the simplest - like the new Minimizer Window Shield visor. It 

quickly and permanently attaches to the driver or passenger side windows on most rigs 

(specify when ordering). With your window open it radically improves cab ventilation and 

keeps you dry in rain. It also reduces wind noise, helps eliminate fog on interior windows and 

is a great way to make your cab more comfortable for smokers and non-smokers alike.

Chrome 

Clear 

Smoke 

BUG DEFLECTORS 

Does for your front side what 

our fenders do for your back side. 

Bug deflectors have always been a good idea. 

Send the critters up and over the rig and keep 

your hood and glass cleaner. Minimizer bug 

deflectors also enhance the look of your rig; 

they’ll last as long as you’re on the road. 

69

STEER AXLE BRACKETS 

Steerable Axle Brackets 

* Designed specifically for steerable 

axles. 

* Easy bolt-on design for quick 

installation. 

* Over 20 different kits are available 

depending on the style and brand 

of your axle. 

* Fenders are also available. 

70 

Steerable kits are 

made to bolt on using 

existing holes on the 

brake assembly.

LIFT AXLE BRACKETS 

Lift Axle Brackets 

* Designed specifically for 5” round 

lift axles. 

* Easy bolt-on design for a quick 

installation. 

* Available for dual wheel and single 

wheel applications. 

* Fenders are also available. 

Fenders are molded for a specific 

tire size. 

The bracket kit clamps 

on to a 5” round axle 

allowing the fender to 

raise and lower with 

the axle. 

71

Our future’s so bright you’re gonna need shades! 

CHROME Poly 

sunglasses sold separately 

72 

Coming In 2009 ... 

The look ... the shine ... the spectral 

highlights and reflectivity of a true 

chromium plated fender ... but made 

from durable, forgiving plastic. Look 

for it in Spring-Summer 2009.

Home Of The Minimizer™

Create successful ePaper yourself

Delete template?

Save as template?