Carbon Fabrics 12K Uniderectional -Thermoplast fixation- Article: HP-U315C Price €/m² incl. VAT net from 1m² 22,49 18,90 from 3m² 21,30 17,90 from 5m² 19,75 16,60 from 10m² from 25m² from 50m² from 100m² 17,79 16,30 14,88 13,92 14,95 13,70 12,50 11,70 Fields of Application: Model making, boat construction, motor sports, sports equipment, sandwich construction, orthopedic technology Technical Data Weight approx. 315 g/m² Width 100 cm Construction Unidirectional 0° Warp 3,65 y./cm Weft 1,6 y./cm Fibre Warp HT-Fibre 12K 800tex Weft E-Glass / Hotmelt Suitable for epoxy resin Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 378g/m², laminate thickness: 0,51mm, laminate weight: 693g/m² Carbon Fabrics 12K approx. 400g/m² Carbon Article: HP-P400C Price €/m² incl. VAT net from 1m² 25,99 21,84 Technical Data Weight 400 g/m² Width 100 cm from 3m² 22,59 18,98 Construction Plain from 5m² 21,30 17,90 Warp 2,5 y./cm from 10m² from 25m² from 50m² from 100m² 19,98 16,79 18,39 15,45 16,90 14,20 16,48 13,85 Fields of Application: Model making, boat construction, motor sports, sports equipment. Weft Fibre Suitable for 2,5 y./cm HT-Fibre / 12K 800tex epoxy resin Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 480g/m², laminate thickness: 0,64mm, laminate weight: 880g/m² Article: HP-T421C Technical Data Price €/m² incl. VAT net from 1m² 25,99 21,84 from 3m² 22,59 18,98 from 5m² 21,30 17,90 from 10m² from 25m² from 50m² from 100m² 19,98 18,39 16,90 16,48 16,79 15,45 14,20 13,85 Fields of Application: Model making, motor sports, boat construction, sports equipment, carbon design. Weight Width Construction Warp Weft Fibre Suitable for 420 g/m² 100 cm Twill 2,6 y./cm 2,6 y./cm HT-Fibre / 12K 800tex epoxy resin Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 530g/m², laminate thickness: 0,67mm, laminate weight: 924g/m² 12 phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Carbon Fabrics 12K 600g/m² Article: HP-T600C Technical Data Price €/m² incl. VAT net from 1m² 35,58 29,90 from 3m² 31,99 26,88 from 5m² 29,99 25,20 from 10m² from 25m² from 50m² from 100m² 28,50 27,25 25,99 24,95 23,95 22,90 21,84 20,97 Fields of Application: Model making, motor sports, boat construction, sports equipment, carbon design. Weight Width Construction Warp Weft Fibre Suitable for 600 g/m² 100 cm Twill 3,7 y./cm 3,7 y./cm HT-Fibre / 12K 800tex epoxy resin Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 720g/m², laminate thickness: 0,96mm, laminate weight: 1320g/m² Carbon Fibre Roving This 50K fibre strand is with 50.000 single filaments more than twice as heavy and wide as the conventional 24K fibre. Therefore, the price-performance ratio (€/Kg) is very interesting. Article: HP-HT-50K Technical Data Price €/roll incl. VAT net 50m (188g) Basic price/100g 100m (375g) Basic price/100g 250m (938g) Basic price/100g 12,97 6,90 23,68 6,31 41,53 4,42 10,90 5,79 19,90 5,30 34,90 3,72 Fibre: Panex 35 ® Density: 1,81 g/m³ Tensile Modulus: 241 GPa Fibre Diameter 7,2 µm Filament count: 50.000 = 50K Weight: approx. 3,75 g/m Suitable for epoxy resin Carbon 1500m (5,6kg) Basic price/100g 190,28 159,90 3,28 2,70 ** Suitable for hand laminating, winding and pultrusion** phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 13
- Page 1 and 2: Product Catalogue Valid from April
- Page 3 and 4: CATEGORY Page CATEGORY Page transpa
- Page 5 and 6: OVERVIEW CARBON FABRICS PAGE ARTICL
- Page 7 and 8: Carbon Fabrics 3K 195g/m² Article:
- Page 9 and 10: Carbon Fabrics 3K 245g/m² - Specia
- Page 11: Carbon Fabrics 3K 285g/m² Article:
- Page 15 and 16: Spread Tow Carbon Fabrics Article:
- Page 17 and 18: OVERVIEW MULTIAXIAL CARBON FABRICS
- Page 19 and 20: Carbon Fabric Unidirectional 0° Ar
- Page 21 and 22: ! Article: HP-B100C* Price €/m²
- Page 23 and 24: Article: HP-T450C Price €/m² inc
- Page 25 and 26: Carbon Standard Tapes Our Fabric-Ta
- Page 27 and 28: Carbon Standard Tapes 340g/m² Unid
- Page 29 and 30: Carbon Fibre Flat Braid Carbon brai
- Page 31 and 32: Carbon-Design-Fabric -with UV-resis
- Page 33 and 34: 3D-Design-Fabric The 3D-Design-Fabr
- Page 35 and 36: Aramid Fabrics Article: HP-P60A Tec
- Page 37 and 38: OVERVIEW HYBRID FABRIC Hybrid Fabri
- Page 39 and 40: OVERVIEW GLASS FILAMENT FABRIC Glas
- Page 41 and 42: Glass Filament Fabrics -Silane- * U
- Page 43 and 44: Glass Filament Fabrics -Silane- * U
- Page 45 and 46: Glass Filament Fabrics -Finish- Art
- Page 47 and 48: Glass Filament Fabrics -Finish- * U
- Page 49 and 50: Glass Filament Fabrics -Finish- * U
- Page 51 and 52: Starter set mould making With this
- Page 53 and 54: Glass Roving Fabrics Article: HP-T5
- Page 55 and 56: Glass Filament Fabric Tapes -Silane
- Page 57 and 58: Bidiagonal Glass Fabric Tape Articl
- Page 59 and 60: Glass Fibre Flat Braid E-Glass brai
- Page 61 and 62: Chopped Strand Mats -Powder Bounded
- Page 63 and 64:
Combo Mat The Combo-Mat is made of
- Page 65 and 66:
Mould Making Fabric - Non Woven- Th
- Page 67 and 68:
Multiaxial Glass Fabrics -Unidirect
- Page 69 and 70:
Multiaxial Glass Fabrics -Bidiagona
- Page 71 and 72:
Multiaxial Glass Fabrics -Triaxial
- Page 73 and 74:
Price Reductions Further Strengths
- Page 75 and 76:
Article: HP-3DXPS-HX-3 Thickness: 3
- Page 77 and 78:
Coremat ® of Lantor Core material
- Page 79 and 80:
Instructions / Videos Vacuum Techno
- Page 81 and 82:
Peel Ply / Tear-Off Fabric -Plain-
- Page 83 and 84:
Polyester Non-Woven Absorber * Up t
- Page 85 and 86:
Vacuum Bagging Tube Our Vacuum Bagg
- Page 87 and 88:
”Double Sided“ Adhesive Fibre G
- Page 89 and 90:
MTI ® - Hose Gases can escape thro
- Page 91 and 92:
Spiral Tube for Vacuum Infusion The
- Page 93 and 94:
Resin supply hose for the Blade Run
- Page 95 and 96:
IQS-Connectors T-Connector Connecto
- Page 97 and 98:
Standard-Push-Connector Y-Hose Conn
- Page 99 and 100:
Vacuum Pump 220V / 750W Compact, lo
- Page 101 and 102:
FEATURES VISCOSITY COLOUR SYSTEM /
- Page 103 and 104:
Epoxy Filler The epoxy filler HP-E3
- Page 105 and 106:
Epoxy Adhesive System HP-E5K in an
- Page 107 and 108:
Product Properties: Resin Hardener
- Page 109 and 110:
Standard Laminating Resin Product P
- Page 111 and 112:
High Strength Thermosetting Resin P
- Page 113 and 114:
Multi-purpose Resin System - medium
- Page 115 and 116:
High Heat Resistant Epoxy System Th
- Page 117 and 118:
Covering and Laminating Epoxy-Syste
- Page 119 and 120:
Resin System - Statement of Approva
- Page 121 and 122:
Injection-Resin / Laminating Resin
- Page 123 and 124:
Covering Resin System The Epoxy Top
- Page 125 and 126:
Coating and Laminating Epoxy-System
- Page 127 and 128:
Surface and Covering Epoxy-System C
- Page 129 and 130:
Casting Resin System -Transparent-
- Page 131 and 132:
Casting Resin System - residually f
- Page 133 and 134:
Roller Coating Epoxy-System The Epo
- Page 135 and 136:
Levelling Coating Epoxy-System The
- Page 137 and 138:
Epoxy resin basic system for paving
- Page 139 and 140:
Epoxy resin basic system for paving
- Page 141 and 142:
Epoxy-System for Aquariums and Terr
- Page 143 and 144:
Properties: • Excellent value com
- Page 145 and 146:
Laminate Polyester Resin - Waxed fo
- Page 147 and 148:
Laminate Polyester Resin - Wax-Free
- Page 149 and 150:
Gelcoat - ISO/NPG Basis The Polyest
- Page 151 and 152:
Article: HP-P21TC RAL 6020 ISO-NPG-
- Page 153 and 154:
Silicone Mold System The silicone s
- Page 155 and 156:
Polyurethane flexibal Casting Resin
- Page 157 and 158:
Acryl Casting Resin The acrylic sys
- Page 159 and 160:
Features and Benefits: • High qua
- Page 161 and 162:
HP-PUR-PLUS-TEXTUR / PUR-Top-Coat H
- Page 163 and 164:
HP-PUR-PLUS and HP-PUR-TEXTUR We al
- Page 165 and 166:
Colour Pastes - according to RAL ca
- Page 167 and 168:
Colour Pastes, metallic These extra
- Page 169 and 170:
Transparent colourant (liquid) High
- Page 171 and 172:
FEATURES POLISHABILITY CONSUMPTION
- Page 173 and 174:
Mould Release Agents Article: HP-CX
- Page 175 and 176:
Article: BM-RV23 Reactive diluent f
- Page 177 and 178:
DOSAGE BULK WEIGHT FEATURES /BENEFI
- Page 179 and 180:
Microballoons Microballoons < 0,2 m
- Page 181 and 182:
Quartz Sand Quartz sand as filler f
- Page 183 and 184:
OVERVIEW ADDITIVES HP-BEL11 HP-BEL5
- Page 185 and 186:
Nobby Roller Aluminium roller with
- Page 187 and 188:
Article: HP-L1101 Flat brush light
- Page 189 and 190:
Article: HP-L1010 Foam Roller 5cm A
- Page 191 and 192:
Article: HP-L1063 Mixing Cup 250ml
- Page 193 and 194:
Article: HP-L7005 Plastic Bottle 10
- Page 195 and 196:
Needle Files -Small- Article-No.: D
- Page 197 and 198:
Article: HP-L1201 Tooth scraper Pri
- Page 199 and 200:
Article: HP-L1053 Nitril Gloves siz
- Page 201 and 202:
COMPLETE SETS These sets have been
- Page 203 and 204:
Notes Ordering Information phone: +
- Page 205 and 206:
ORDERING INFORMATION OFFER: All off
- Page 207 and 208:
ORDERING INFORMATION DELIVERY WITHI