AFLO 240V High Level Alarm Datasheet

POWER
ALARM
MUTE
MAKING EVERY DROP COUNT
EQUIPMENT
240V Liquid High
Level Alarm
WIRING INSTRUCTIONS
JUMPER POSITION
MAINS
SUPPLY
240Vac
CONNECTION TO
AUTOMATIC PUMP
8AMP MAX
OPTIONAL
BMS VOLTAGE
FREE CONNECTION
OPTIONAL
AUXILIARY 12Vdc
OUTPUT
COMMON
MUTE
POWER
ALARM
FLOAT
SWITCH
AUXILIARY
INPUT / OUTPUTS
12Vdc
5 MINUTE TIMEOUT
CONTINUOUS
FIGURE 1
PART NO. MAT-FPC-12651
Features & Benefits
• Designed to provide warning indication when
storing (Diesel, Oil, Waste Oil, AdBlue etc) tank is
either empty or full.
• Warning Alarms are: Audio - Buzzer & Visual - LED
Pilot Light & Stobe
• The buzzer can be muted via the mute button. The
visual level alarms will remain on until the alarm
condition/level is eradicated
• If not muted the audible buzzer will automatically
silence after 5 minutes. If a continuously sounding
audible alarm is required, this can be done by
changing the Jumper position (see Figure 1).
• Controller can be installed up to 50m from the
tank being monitored. Float Switch cabling is
‘safe’, low voltage circuitry
• Warning condition determined by a Float Switch
• NOTE: Float Switch not included - optional extra
• Controller must be installed by a suitably
qualified Electrician
LIQUID LEVEL
ALARM
FPC- SERIES
HIGH LEVEL
LOW LEVEL
T 03 9281 6200 F 03 9281 6250 E sales@aflo.com.au W www.aflo.com.au