Water softeners catalog

Water hardness (limestone)
In °F (French degrees), can be measured with the drops of Titrant, important to determine the choice of the
type of water softener and optimize the consumption of salt.
Calculate sample to determine the correct article
A water softner of 25 liters resin with a hardness of 40°F (medium-high hardness), develops 3.500liters of
softened water (140:40=3.500). In this case, must planning 3.5m3 in treatment capacity of the softener
through the buttons on the display and provides free water softener without scale at zero French degrees.
Adjustment of outlet hardness
It's recommended to not leak totally softened water in a residential installation. CS Water softeners have a
residual hardness integrated regulator that allows you to precisely adjust the hardness of the treated water.
To adjust the residual hardness must then carefully open the regulator MIX valve. All softeners are supplied
with the valve fully closed and then will deliver water at 0°F. Water intended for human consumption, we
recommend a residual hardness between 5 and 10ºF for copper pipes and between 8 and 10 º F for iron
pipes. Depending on the hardness out planned, the water softener will tend to produce more water and less
sweetened salt intake because the input hardness must be compensated with the output value. A water
softener of 25 liter resin with a hardness of incoming 40°F and 5°F and out of hardness, develops 4.000lit.
of softened water (140:35=4.000). In this case must planning 4.0 m3 in treatment capacity of the softener
through the buttons on the display. The average every person consumes 150 liters of water a day is
recommended and a regeneration time scheduled every 4/5 days, then a family of 4 with water at 40°F
consumes for 5 days 3.000 liters, a 25 liters of water softner so with a planned regeneration even at 6 days
can be installed.
Benefits and advantages
Reduction of water hardness, which is cause of scale. ENERGY SAVING: the device prevents the
formation of deposits in pipes and hydraulic lines. Greater sense of wellness during the shower. Skin soft
and clean. Increased duration of appliances and boilers. COST SAVING: reduction in the use of soaps,
fabric softeners and chemicals. Reduced maintenance costs. Fully automatic operation. It should just worry
about adding salt in the water softner.
Increased sodium (for drinking water)
Most of the sodium consumed is taken with food, especially those produced by industrial processing. Salt is
an excellent preservative and is used as an additive for processed products. The intake of sodium with the
water we drink is relatively low compared to that which is taken with food. All softeners to produce soft
water using ion exchange resins in the produce softened water output of sodium ions. The recommended
sodium limit for water intended for human consumption is 200 liters ppm. Depending on the concentration
of sodium and water hardness, the water can have a concentration of sodium than the recommended.
Where this occurs, or if you need to follow a diet low in salt, it is advisable to install a reverse osmosis
drinking water for the home.
Specifications Model 15000124-01 12,5 lt. resin (ideal for 2/3 people)
* Exchange capacity: 70ºHFxm3
* Regeneration salt consumption: 1,2 kg/salt.
* Water consumption for regeneration: 80 lt.
* Number treated water for regeneration, 35°F-2,000m3, 40°F-1,750m3, 45°F-1,555m3, 50°F-1,400m3,
60°F-1,166m3.
* Working flow: 0,4 m3/h
* Working flow MAX: 0,6 m3/h
* Inlet/Outlet water: 3/4"
* Dimensions mm (WxDxH): 300x512x650
Specifications Model 15000124-02 25 lt. resin (ideal for 6/7/8 people)
* Exchange capacity: 140ºHFxm3
* Regeneration salt consumption: 2,5 kg/salt.
* Water consumption for regeneration:180 lt.
* Number treated water for regeneration, 35°F-4,000m3, 40°F-3,500m3, 45°F-3,111m3, 50°F-2,800m3,
60°F-2,333m3.
* Working flow: 0,8 m3/h
04 May 2021 14/101