You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ARCHWIRES MULTI-STRAND ARCHWIRES<br />
Nitanium Multi-Strand Archwires<br />
• The Super Elastic NiTi Braid 8 Archwire is an eight-strand super elastic nitinol wire <strong>with</strong> great flexibility and low stiffness.<br />
The Super Elastic NiTi Braid 8 Archwire may be used in the initial stages of treatment to gently level and align while providing<br />
torque control <strong>with</strong> full slot engagement. This wire is also effective in the later stages of treatment by holding the desired<br />
torque, but providing additional vertical correction to finish your case.<br />
Stainless Steel Multi-Strand Archwires<br />
• We offer three versions of stainless steel multi-strand, preformed archwires: twist archwire — three strands, coaxial<br />
archwire — six strands, and braided archwire — eight strands.<br />
Stainless Steel Twist Archwires — Three Strands<br />
• This archwire is three fine, round twisted strands that form a single wire.<br />
This wire provides:<br />
• Gentle leveling during early-treatment stages<br />
• Greater deflection before elastic limit is reached<br />
• No fraying when cut<br />
• Bright surface finish<br />
• Moderate force, but drops quickly as teeth move<br />
• Moderate resiliency; measurably better than solid stainless steel wire<br />
Stainless Steel Coaxial Archwires — Six Strands<br />
This archwire consists of five equal-size wires wrapped around a single, same-size core wire.<br />
This wire provides:<br />
• Good resilience, allowing bends to a greater degree than ordinary twist archwire<br />
• A great archwire for the initial treatment stage — good for initial alignment<br />
• Bright finish<br />
• Low to moderate forces<br />
• Short activation time, forces drop quickly as teeth move<br />
Stainless Steel Braided Archwires — Eight Strands<br />
This archwire consists of eight fine, equal-sized Type 302SS wires braided tightly and rolled to the most<br />
popular square and rectangle wire sizes. This wire provides the following:<br />
• Super resiliency allowing for early application in treatment<br />
• Fills edgewise slot while offering torque control<br />
• Excellent archwire to use when transitioning from round to rectangular shape<br />
• Easy to ligate<br />
• Low forces<br />
• Does not fray when cut<br />
• Great for aligning and for finishing<br />
• Rectangle wires can be used for added torque control<br />
The Twist and Coaxial Archwires are available in straight length, which can be used for retainers and<br />
lingual arches. The precision formed wires can be cut <strong>with</strong>out unraveling. Retainer wires are medium/<br />
hard temper to facilitate forming retainers and lingual arches.<br />
I-20 ARCHWIRES