DB Lab Catalogue 3rd Edition 2023

100
Orthodontic Model Trimmer
The model trimmer is particlarly strong and its driving shaft turns on
ball bearing. The unit has two motors that act either simultaneously
or independantly by means of two switches. It is equipped with a
solenoid valve and on its lower side there is a two faucets to adjust
seperately the water flux on the two wheels. This model trimmer
can be equipped with carbide wheels, which can be used on both
sides, or with diamond wheels. It is also supplied with a goniometer
and a graduated model presser. A double goniometer is available on
diamond.
Smooth & Coarse Wheels
£3925.00
Technical Data
Supply: 230V - 50Hz
Power: 450W
Motor Speed: 1400 G’/min - RPM - T/min
Dimensions: 53x42x40 h cm
Weight: 36kg
Smooth & Diamond Wheels
£4452.00
Sirio Model Trimmer
The new model trimmers SIRIO Dental are built entirely of reinforced plastic which makes them very resistant to water, corrosion and
shocks caused during the working operation. The new, very powerful motor with high torque combined with an attractive design make
them ideal for every working environment.
SQ 148 L - Water Version The new SQ148L is a water-based trimmer and it is
fitted with a bakelite disc. It must be connected to the water supply net by means
of a pipe which is supplied along with the machine. The trimmer is equipped with a
solenoid valve which opens the water supply only when the engine is running.
SQ 148 L - Water Version with Diamond Disk The new SQ149DL with diamond
disk is a water-based trimmer. It must be connected to the water supply net by
means of a pipe which is supplied along with the machine (as SQ148L)
SQ 148 L - Water Version
POA
SQ 149 DL - Water Version with Diamond Disk
POA
Technical Specifications SQ148L SQ149DL
Power Supply
Output
Weight
230V - 50/60HZ
1000W
18Kg
Rotatine Speed 2800rpm 2800rpm
Connection Water Water
Disk 10” DA 147 DM 148
Dimension 34(L)X43(P)X35(H) 34(L)X43(P)X35(H)
tel. 01535 650 578