SMC SV Catalog - Coast Pneumatics
SMC SV Catalog - Coast Pneumatics
SMC SV Catalog - Coast Pneumatics
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Series <strong>SV</strong> D-sub Connector<br />
56<br />
Manifold Electrical Wiring<br />
®<br />
10F/16F D-sub Connector Type (25 pins)<br />
Usable number of solenoids<br />
Model Maximum number of solenoids<br />
Tie-rod base type 10<br />
Cassette base type 16<br />
Light/Surge<br />
voltage suppressor<br />
Light/Surge<br />
voltage suppressor<br />
Light/Surge<br />
voltage suppressor<br />
Light/Surge<br />
voltage suppressor<br />
<strong>SV</strong>1000<br />
to<br />
<strong>SV</strong>4000<br />
<strong>SV</strong>1000<br />
<strong>SV</strong>2000<br />
13<br />
12<br />
11<br />
2<br />
1<br />
25<br />
24<br />
15<br />
14<br />
23<br />
18<br />
23<br />
Common<br />
Common<br />
SOL. B<br />
SOL. A<br />
Station 1<br />
SOL. B<br />
SOL. A<br />
Station 2<br />
SOL. B<br />
SOL. A<br />
Station 1<br />
• This circuit has double wiring specifications for up to 11 stations. Since the usable number of<br />
solenoids differs depending on the manifold type, refer to the table below. In the case of single<br />
solenoids, connect to SOL. A. Furthermore, when wiring is specified on a manifold specification<br />
sheet, connections are made without skipping any connectors, and signals A for single and A, B for<br />
double are in order 1→14→2→15, etc.<br />
• Stations are counted starting from station 1 on the D side (connector side).<br />
• Since solenoid valves do not have polarity, either the +COM or –COM can be used.