3 Worth Considering Hot Tub Chemicals for Hot Tubs and Spas

3 Worth Considering Hot Tub Chemicals for Hot Tubs and Spas
Do you own a hot tub at home? If yes, then you
must be familiar with hot tub spa chemicals
required for proper hot tub care and maintenance.
However, maintaining your hot tub and spa water
properly balanced is significant to keep it clean and
pathogen-free.
As a spa and hot tub owners, you might find it
difficult to control the hot tub chemical balance.
Check out the below discussed hot tub chemicals
that you should consider buying for hot tub and
spa.
1. NLCT- Cal-Rise
Are you looking to increase the calcium level of your
spa or hot tub? If yes, then you should look no
further than NLCT- Cal-Rise. It’s approved to be
used in wooden tubs and all kinds of spas and hot
tubs. This calcium increaser will increase the calcium
hardness in hot tub water.

The Cal-Rise is fully soluble in water which means
you can use your spa or hot tub immediately
after application. It’s compatible with all
sanitizers like bromine, biguanide, and chlorine.
You should use Cal-Rise to increase calcium level
and prevent foaming in your spa.
However, low calcium levels (soft water) can
result in metal parts corrosion in your spa. Soft
water is responsible for failing heating elements
early. Hence, it’s better to check water levels
regularly and make sure that hot tub has right
levels of calcium hardness.

2. NLCT- NATURE PUR
Are you looking to remove spa waste materials
effectively? You should consider using NLCT-
NATURE PUR. It is approved to be used in wooden
tubs and all types of spas as well as hot tubs. This
is a safe, highly effective and eco-friendly solution
for removal of sap waste materials.
Generally, NLCT- NATURE PUR helps in removing
oils and grease that form the surface of spa water
that can result in bath tub ring. This proven
solution comprises of natural enzymes that
eliminates oil and dirt particles. If used regularly, it
will improve the overall efficiency of the filter.
NATURE PUR is highly compatible with all sanitizers
like bromine, chlorine, and biguanide.
If you really want to enjoy hot tubing safely, then
getting healthy clear water is necessary. However,
oils and grease are much lighter than water and
generally float on the top of water. If you leave
them untreated, they will cling to the side wall and
result in an unsightly ring.

3. NLCT Alka-Rise
Are you concerned about how to
increase the alkalinity level of hot tub
water? Now you will do it through
NLCT Alka-Rise. If the Total Alkalinity
of your hot tub is reading low on a
spa test, you should use an alkalinity
enhancer in your spa.
NLCT Alka-Rise is specifically
formulated for all hot tubs and spas
including in any wooden hot tub. If
you maintain the alkalinity level of
your spa, it will prevent the changes
in the pH levels of your spa water.
It’s highly suggested to test the
water levels in your hot tub regularly
to maintain the proper levels of
alkalinity.

Want to learn more about hot tub chemicals? If yes, then don’t
hesitate to contact Northern Lights Cedar Tubs Direct at 1-800-759-
8990.

Contact Us
Address:
Northern Lights Cedar Tubs & Saunas
305 Mckay Ave. Unit #20
Winnipeg, Manitoba, Canada, R2G 0N5
Ph: 800 759 8990