tolyhook Medium White Product Specification Sheet

Product Specification Sheet (external)
Full Name
tolyhook Medium WHITE
Internal Reference Number
HMT-W-EX-01
Manufacturer
Venrey Ltd.
MRA30, Marsa Industrial Estate
Marsa MRS 3000
MALTA
Product Description
The product is made up of a single injection moulded component and four (4) hardened steel pins,
suitable for anchoring into hard walls (typically concrete, brick, wood). Only a hammer is required to
install the product.
Component List
Quantity
per unit
Drawing
Reference
Material Details
Supplier Material Internal Reference
Hook Body,
Medium
1 HMT_B01 Venrey
Polyamide
Colourant
Pin 4 PHS_01 External Steel
RVGPAS-W
WHITE
CZ-PM_2314-
018_UK-TNW_9790
Product Photograph
Recommended Loading
This product has been internally tested and tests have determined that the integrity of the hook can
withstand a load of 10 Kgs. when fixed in concrete / stone.
Currently testing is also underway at an independent 3 rd party Certification Body.
Page 1 of 3

Product Specification Sheet (external)
Full Name
tolyhook Medium WHITE
Internal Reference Number
HMT-W-EX-01
Component Dimensions
Note: Critical dimensions are enclosed in a red box.
Hook Body
B
F
E
A
C
D
Dimension Nominal (mm)
A 30.535
B (4 off) 1.205
C 9.28
D 8.835
E 5.175
F 5.385
Hardened Steel Pin
Quality Plan
Final Inspection
Page 2 of 3

Product Specification Sheet (external)
Full Name
tolyhook Medium WHITE
Internal Reference Number
HMT-W-EX-01
Parameter to check Carried out by Inspection Document
Visual aspects
Color
Flash
Short Moulding
Contamination / Specks
QA
Final Inspection Report
Functional aspects
All pins inserted
Fit of pins
QA
Final Inspection Report
Packaging
User information check
Verify polybag type (if applicable)
Verify carton box type
Quantity or Gross Weight in carton
Label details
QA
Final Inspection Report
Disclaimer
This product has been designed to be used as a Picture Hook.
The use of cord rather than wire is recommended to hang picture frames.
Alternative uses for this product can be evaluated, but this is subject to customer own testing and risk.
Picture hook is not to be used for very heavy or valuable pictures. Our picture hooks are rated according to the number of
kilograms they can support. Users have to understand that such ratings can vary due to the condition of the substrate they
are being hammered into.
It is good general practice to use two hooks for each picture, spaced an appropriate distance apart on the wall. Two hooks
will decrease the likelihood that your picture will move over time and add considerable peace of mind and security by
distributing the weight of the picture frame on two hanging points instead of one.
Page 3 of 3